Tuning Process in MWStudio - curacao-dreams.com€¦ · 1 CST STUDIO SUITE™ 2006 Application and Feature Tutorial Filter Simulation F. Hirtenfelder Filter Terminology Solver Selection

www.cst.com1

CST STUDIO SUITE™ 2006Application and Feature Tutorial

Filter SimulationF. Hirtenfelder

Filter TerminologySolver SelectionMeshing TechniquesAccuracyTuning HintsExamplesConclusions

www.cst.com2

Filter TerminologyClassification of Filters

LP-Prototype

www.cst.com3

Solver Selection

Time Domain (TD)

Eigenmode (E)Modal (Resonant Fields)Lossy/Lossless

Frequency Domain (FD)

General Purpose

Resonant: Fast S-parameter (MOR)

Resonant: S-Parameter, Fields (Modal Analysis)

www.cst.com4

Solver Selection: TimeDomain

Extremly small variations of tuning elements: require small mesh steps and thus long run timesPBA helps greatly to keep number of mesh cells low,Resonances requires long run times, AR Filter settings critical

1h 52 min (2.7 GHz PC)

www.cst.com5

Solver Selection: Resonant Fast S-Param. Robust and fast solver

for filters andhighly resonant structures

12 min (2.7 GHz PC)

Resonant Fast S-Parameter Solver Advantages: • supports PBA• lossy dielectrics• insensible to high mesh ratios, small mesh steps• handle S-parameters for port modes under cutoff (required for submodeling in CST DS)

1234

www.cst.com6

Solver Selection: Eigenmode

f3f2f1fof4f5f6

K34= (f4-f1)(f6-f3)/K12= =(1767-1735)(1791-1708)/66= 40.24MHz

Terminology: Coupling Bandwidth

Even/Odd Mode Multi Eigenmode

www.cst.com7

Accuracy: PBA

2. Tuning Step30 Lines/Lambda = 51000 cells TD (AR) Solver time: 256 sResonant (MOR) Solver 91 s

slight readjustedment of only one parameterby 0.0125mm!!

1. Adaptive mesh refinementof untuned filter

3. Increased mesh density to 50 Lines/lambda

Resonant (MOR) Solver 414 s

www.cst.com8

Accuracy: Staircase

89.000 Cells. 2.5 min(1.7 GHz Laptop)

Mesh density was increased:Results did not converge to the PBA-results

384.000 Cells. 27 min

600.000 Cells. 46 min1.050.000 Cells. 1h 15 min

(all MOR Solver, 1.7 GHz Laptop) 5Mio , 2.5 h

www.cst.com9

Convergence using different Mesh types and Solvers

Accuracy: Hexa vs. Tetra

1)

2)

1)1) TD -FD Show same curve

Refined mesh (convergend solution) 2)

3) Tetra

1) TD vs FD must showsame results

2) PBA (Hexa) showsconvergence very early.(Refinement doesn‘t changesolution anymore).3)Tetra converges towardshigher frequencies.

www.cst.com10

Convergence check using Tetra Mesh3 adaptive points togenerate a refined meshaccording to the appearanceof the various modes!

Inital and final mesh after 5 passes

Accuracy: Hexa vs. Tetra

www.cst.com11

Accuracy: Hexa vs. Tetra

Check of Groupdelay Hexa vs. Tetra Mesh

Shape of groupdelay practically identical between Hexa and Tetra mesh.Deviation of Tetra results due to facetting: the resonators appearsmaller in size and thus shifts groupdelay towards higher frequencies

www.cst.com12

Filter Tuning: SubmodelsTuning of a Combline Filter (Cross coupling)

www.cst.com13

Approximation equations used as initial values for an optimizationperformed in CST DESIGN STUDIO

Theory

Filter Tuning: Equiv. Circuits

www.cst.com14

Filter Tuning: Group delayCoupling Bandwidth, Group delay

www.cst.com15

Filter Tuning: Groupdelay, ExamplesTuning of a Dual Mode Filter Iris Coupled Cavity Filter

Hairpin Filter

www.cst.com16

The Inverse Chirp-Z TransformationFilter Tuning: Inverse Chirp-Z

Mistuned Coupling K12 (between Resonator 1 and 2)

Mistuned 2nd Resonator

1st Resonator OK3rd Resonator

K12 increased

1

2

4 x x

2nd Resonator mistuned

www.cst.com17

Filter: Conclusions

• CAD Modeler easy to use with respect to parameterization

• Various solver technologies available: TD, FD, E• Optimization and parameterization control via

complex post processing templates• Various meshing techniques available• Flexible link to circuit simulator CST-

DESIGN STUDIO including CST-MICRO WAVE STUDIO submodels

• Various tuning procedures available