100 DAFTAR PUSTAKA Dynamics Research Corporation, 1992, Techniques For Digitizing Rotary and Linear Motion. H.D. Kwon, M. Burdekin, Development and application of a system for evaluating the feed- drive errors on computer numerically controlled machine tools, Precision Engineering 19 (2/3) (1996) 133–140. T. Schmitz, J.C. Ziegert, Dynamic evaluation of spatial CNC contouring accuracy, Precision Engineering 24 (2000) 99–118.. H. Qiu, Y. Li, Y. Li, A new method and device for motion accuracy measurement of NC machine tools. Part 1: Principle and equipment, International Journal of Machine Tools and Manufacture 41 (2001) 521–534. H. Qiu, Y. Li, Y. Li, A New method and device for motion accuracy measurement of NC machine tools. Part 2: Device error identification and trajectory measurement of general planar motions, International Journal of Machine Tools and Manufacture 41 (2001) 535–554. K. Iwasawa, A. Iwama, K. Mitsui, Development of a measuring method for several types of programmed tool paths for NC machine tools using a laser displacement interferometer and a rotary encoder, Precision Engineering 28 (2004) 399–408. Krar. Stephen F, Gill. Arthur, 1999, Computer Numerical Control Programming Basics, 200 Madison Avenue, New York, NY 10016. H.L. Liu, H.M. Shi, B. Li, X. Li, A, new method and instrument for measuring circular motion error of NC machine tools, International Journal of Machine Tools and Manufacture 45 (2005) 1347–1351. H. Iwai, K. Mitsui, Development of measuring method for motion accuracy of NC machine tools using links and rotary encoders, International Journal of Machine Tools & Manufacture 49 (2009) 99–108 Pengembangan dan Kalibrasi Alat Ukur Berbasis Encoder di Mesin CNC YUDI OKTRIADI, Muslim Mahardika, S.T., M.Eng., Ph.D Universitas Gadjah Mada, 2018 | Diunduh dari http://etd.repository.ugm.ac.id/