Confi rmation on qua li ty a ss uran ce a cco r ding to nuclear st andar d KTA 140 1. and AVS 0 10 0/ 50 On behalf of the German nuclear power plant operators, RWE Nuclear GmbH as a partner of the VGB PowerTech e.V. working group "Assessment of Contractors" confirms TS Verbin d ungt eile Gm bH Dieselstraße 1, 54634 Bitburg for the sites 54634 Bitburg und 99996 Menteroda and the scope of supply and services production of fasteners (screws, bolts, nuts, washers ... ) the qualification for system- and product related quality assurance. The assessment was performed on January 31 s t, 2019 by order of Framatome GmbH based on the standards • KTA 140 1 and • AVS 0 100 / 50 dass 1: Pressure boundary components Product forms approved pursuant to KTA 3201.1 as weil as on the assessment documents of the VGB PowerTech e.V. working group "Assessment of Contractors" in consideration of product related requirements. Details of the assessment are given in the report IBGSI/2019/ de/0130. This confirmation is valid until March 1 s t, 2022 provided that the con- ditions on which the assessment was based have not been changed. Essen,April 2019 Torsten Metzler Eduard Kessler RWE Nuclear GmbH Vt:iEl POWERTECH - En!3W . :. •• Preussen _. E1ektra . RWE Vattenfall Europe Nuclear Energy VA1'TENFALL
Welcome message from author
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
Confi rmation on quality assurance according to
nuclear standard KTA 1401. and AVS 0 100/50
On behalf of the German nuclear power plant operators, RWE Nuclear GmbH as a partner of the VGB PowerTech e.V. working group "Assessment of Contractors" confirms
TS Verbind ungteile GmbH Dieselstraße 1, 54634 Bitburg
for the sites 54634 Bitburg und 99996 Menteroda
and the scope of supply and services
production of fasteners (screws, bolts, nuts, washers ... )
the qualification for system- and product related quality assurance.
The assessment was performed on January 31 st, 2019 by order of
Framatome GmbH based on the standards
• KTA 1401 and
• AVS 0 100 / 50 dass 1: Pressure boundary components Product forms approved pursuant to KTA 3201.1
as weil as on the assessment documents of the VGB PowerTech e.V. working group "Assessment of Contractors" in consideration of product related requirements.
Details of the assessment are given in the report IBGSI/2019/ de/0130.
This confirmation is valid until March 1st, 2022 provided that the conditions on which the assessment was based have not been changed.
Essen,April 23~, 2019
Torsten Metzler Eduard Kessler
RWE Nuclear GmbH
Vt:iEl POWERTECH
- En!3W
. :. •• Preussen _. E1ektra .
RWE
Vattenfall Europe Nuclear Energy
VA1'TENFALL
Related Documents
