TS 4 Presentation

Testing Machines Inc.Testing Machines Inc.Ronkonkoma, New York Ronkonkoma, New York

Lawson-HemphillLawson-HemphillSwansea, MassachusettsSwansea, Massachusetts

Messmer Instruments, Ltd.Messmer Instruments, Ltd.Kent, United KingdomKent, United Kingdom

Büchel BVBüchel BVVeenendaal, NetherlandsVeenendaal, Netherlands

Lako Tool & Manufacturing, Inc.Lako Tool & Manufacturing, Inc.Perrysburg, OhioPerrysburg, Ohio

Adamel Lhomargy SASAdamel Lhomargy SASRoissy en Brie, FranceRoissy en Brie, France

TMI CanadaTMI CanadaPoint Claire - Dorval, QuebecPoint Claire - Dorval, Quebec

TESTING MACHINES INCORPORATED (TMI)TESTING MACHINES INCORPORATED (TMI)

PHYSICAL PROPERTY TESTING INSTRUMENTS PHYSICAL PROPERTY TESTING INSTRUMENTS FOR THE FOLLOWING INDUSTRIES:FOR THE FOLLOWING INDUSTRIES:• PAPERPAPER• PULPPULP• FILMFILM• FOILFOIL• INKINK• COATINGSCOATINGS• NONWOVENNONWOVEN• TEXTILETEXTILE• CORRUGATED CORRUGATED

LAKO TOOL & MFGLAKO TOOL & MFG

BRIEF HISTORY & COMPANY OBJECTIVESBRIEF HISTORY & COMPANY OBJECTIVES

• OVER 30 YEARS OF EXPERIENCEOVER 30 YEARS OF EXPERIENCE

• PROVIDING SEALING CUTTING & PUNCHING SOLUTIONSPROVIDING SEALING CUTTING & PUNCHING SOLUTIONS

• LEADING MANUFACTURER OF REPLACEMENT SEAL JAWSLEADING MANUFACTURER OF REPLACEMENT SEAL JAWS

• PURPOSE TO DESIGN TOOLING TO IMPROVE PACKAGE QUALITYPURPOSE TO DESIGN TOOLING TO IMPROVE PACKAGE QUALITY

• REDUCE COSTS FOR CUSTOMERSREDUCE COSTS FOR CUSTOMERS

• NUMBER OF PATENTED PRODUCTSNUMBER OF PATENTED PRODUCTS

PATENTED PRODUCTSPATENTED PRODUCTS

HOT CHAMBER PUNCH (HCP)HOT CHAMBER PUNCH (HCP)

• WIDELY USED IN INDUSTRYWIDELY USED IN INDUSTRY

• USED TO PRODUCE STRONG HOLES IN USED TO PRODUCE STRONG HOLES IN

POLYPROPYLENE FILMSPOLYPROPYLENE FILMS

• USED IN VERTICAL SEALING APPLICATIONSUSED IN VERTICAL SEALING APPLICATIONS

• MELTS HOLE WHILE SEALING AND ANNEALINGMELTS HOLE WHILE SEALING AND ANNEALING

• SUPPORTS THE USE OF REDUCED COST LIGHTER SUPPORTS THE USE OF REDUCED COST LIGHTER

GAUGE FILMSGAUGE FILMS

PATENTED PRODUCTSPATENTED PRODUCTS

POLYMER SEALING DEVICE (PSD)POLYMER SEALING DEVICE (PSD)

• DEDICATED TO COLD SEAL APPLICATIONSDEDICATED TO COLD SEAL APPLICATIONS

• FLEXIBLE SEAL INSERTS ELIMINATE SCRAPFLEXIBLE SEAL INSERTS ELIMINATE SCRAP

• CONFORM TO FILM IRREGULARITIESCONFORM TO FILM IRREGULARITIES

• ELIMINATES END SEAL FRACTURESELIMINATES END SEAL FRACTURES

• SEALS THROUGH FILM WRINKLESSEALS THROUGH FILM WRINKLES

• RESULTS IN FRESHER PRODUCTRESULTS IN FRESHER PRODUCT

• YEILDS LONGER SHELF-LIFEYEILDS LONGER SHELF-LIFE

• REDUCES COST AND INCREASES MANUFACTURER REDUCES COST AND INCREASES MANUFACTURER

PROFITSPROFITS

PATENT PENDINGPATENT PENDINGMODULAR SEALING DEVICE (MSD)MODULAR SEALING DEVICE (MSD)

• LATEST DESIGN TO SUPPORT MAINTENANCE PERSONNELLATEST DESIGN TO SUPPORT MAINTENANCE PERSONNEL

• FIXED BASE FACILITATES EASY CHANGE OUTFIXED BASE FACILITATES EASY CHANGE OUT

• EASY ACCESS TO FAILED HEATING ELEMENTSEASY ACCESS TO FAILED HEATING ELEMENTS

• QUICK CHANGE OF SEAL INSERTSQUICK CHANGE OF SEAL INSERTS

• MSD BASE SUPPORTS HOLE PUNCH OR STANDARD INSERTS MSD BASE SUPPORTS HOLE PUNCH OR STANDARD INSERTS

PATENTED PRODUCTSPATENTED PRODUCTSTHE “BOW” DESIGN SEAL SURFACETHE “BOW” DESIGN SEAL SURFACE

• USE IN HEAT & COLD SEAL APPLICATIONSUSE IN HEAT & COLD SEAL APPLICATIONS

• CAN BE USED WITH “MSD” JAWS TO REDUCE DOWN-TIMECAN BE USED WITH “MSD” JAWS TO REDUCE DOWN-TIME

• EASY CHANGE FROM HOT TO COLD SEALINGEASY CHANGE FROM HOT TO COLD SEALING

• MORE FORGIVING THAN UNDERCUT SEAL SURFACESMORE FORGIVING THAN UNDERCUT SEAL SURFACES

• GREATER TOLARANCES ALLOW SEALING WITH FIN LENGTH VARIANCESGREATER TOLARANCES ALLOW SEALING WITH FIN LENGTH VARIANCES

• ALSO SEALS WHEN PACKAGES DO NOT TRACK CORRECTLYALSO SEALS WHEN PACKAGES DO NOT TRACK CORRECTLY

MODULAR HEAD ASSEMBLIESMODULAR HEAD ASSEMBLIESAND OTHER TOOLINGAND OTHER TOOLING

SL & TS SERIES SEALERSSL & TS SERIES SEALERS

SL10 – HOT TACK TESTERSL10 – HOT TACK TESTERSEAL TESTERSEAL TESTER

SL2 – DIGITAL CONTROLSL2 – DIGITAL CONTROLHEAT SEALERHEAT SEALER

SL5 – PLC CONTROLLEDSL5 – PLC CONTROLLEDHEAT SEALERHEAT SEALER

TS4 – DIGITAL CONTROLTS4 – DIGITAL CONTROLHEAT SEALERHEAT SEALER

TS12 – DIGITAL CONTROLTS12 – DIGITAL CONTROLHEAT SEALERHEAT SEALER

TS-4 DIGITAL HEAT SEALERTS-4 DIGITAL HEAT SEALER

PRECISION DUAL-BEAM PRECISION DUAL-BEAM LOAD CELLLOAD CELL

(5-point accredited calibration)(5-point accredited calibration)

INDEPENDENT UPPER INDEPENDENT UPPER AND LOWER SEAL AND LOWER SEAL TEMPERATURESTEMPERATURES

4” LENGTH OF SEAL4” LENGTH OF SEAL

DIGITAL SEAL PRESSURE DIGITAL SEAL PRESSURE OUTPUT DISPLAY OUTPUT DISPLAY (5-point accredited calibration)(5-point accredited calibration)

PRESSURE REGULATORPRESSURE REGULATOR

DWELL TIMERDWELL TIMERSWITCH SELECTABLE DUAL SWITCH SELECTABLE DUAL PRESSURE SET POINT FOR PRESSURE SET POINT FOR TIMER ACTIVATIONTIMER ACTIVATION

(NOT SHOWN ON PROTOTYPE (NOT SHOWN ON PROTOTYPE MACHINE PICTURE)MACHINE PICTURE)

TS-4 DIGITAL HEAT SEALERTS-4 DIGITAL HEAT SEALERTS-4 HEAT SEALER STANDARD FEATURESTS-4 HEAT SEALER STANDARD FEATURES• SWITCH SELECTABLE DUAL PRESSURE SET POINTS SWITCH SELECTABLE DUAL PRESSURE SET POINTS

FOR TIMER ACTIVATIONFOR TIMER ACTIVATION

• PRECISION LOAD CELL SYSTEMPRECISION LOAD CELL SYSTEM

• 5-POINT ACCREDITED CALIBRATION5-POINT ACCREDITED CALIBRATION

• MEASURES & DISPLAYS TOTAL FORCEMEASURES & DISPLAYS TOTAL FORCE

• INTEGRATED DIGITAL ELECTRONIC CONTROLLERINTEGRATED DIGITAL ELECTRONIC CONTROLLER

• DISPLAYS SEALING FORCEDISPLAYS SEALING FORCE

• LOAD TARE FUNCTIONALITYLOAD TARE FUNCTIONALITY

• 5-POINT ACCREDITED CALIBRATION5-POINT ACCREDITED CALIBRATION

• SEAL LENGTHSEAL LENGTH

• ONLY 4” SEAL JAW LENGTHONLY 4” SEAL JAW LENGTH

• 1” WIDE SAMPLE LOADING TRAY 1” WIDE SAMPLE LOADING TRAY

• MACHINE WEIGHTMACHINE WEIGHT

• ONLY 45 LBSONLY 45 LBS

• DIMENSIONS 10” X 12” X 21.5”DIMENSIONS 10” X 12” X 21.5”

CUSTOMIZATION AVAILABLE!!CUSTOMIZATION AVAILABLE!!

TS-4 DIGITAL HEAT SEALERTS-4 DIGITAL HEAT SEALERTS-4 HEAT SEALER SETUP PARAMETERSTS-4 HEAT SEALER SETUP PARAMETERS

• SEAL TEMPERATURESEAL TEMPERATURE

• WIRING OF THE CONTROLLERS REDUCES WIRING OF THE CONTROLLERS REDUCES TEMPERATURE INPUT ERRORTEMPERATURE INPUT ERROR

• FOOTSWITCH ENSURES ACCURACYFOOTSWITCH ENSURES ACCURACY

• DWELL TIMEDWELL TIME

• DIGITALLY CONTROLLEDDIGITALLY CONTROLLED

• STARTS ONCE PRESSURE SET POINT IS STARTS ONCE PRESSURE SET POINT IS METMET

• PRESSUREPRESSURE

• DIGITAL OUTPUT DISPLAYDIGITAL OUTPUT DISPLAY

THANK YOU!THANK YOU!

PLEASE VISIT OUR TABLETOP DISPLAY.PLEASE VISIT OUR TABLETOP DISPLAY.