• High-def HPR130XD, HPR260XD, HPR400XD or HPR800XD plasma cuer • Automac Gas control is standard • EDGE Connect controller with Phoenix cung soſtware • ProNest advanced nesng soſtware with True Hole module • Fully integrated automac torch height control & torch collision protecon • Unized systems w/cut areas from 5’ x 10’ to 12’ x 40’ (water table or downdraſt) • Gantry systems with cut areas in any size to 20’ W x 100’ L (water table or downdraſt) • Dual side drives on rail axis • Structural double frame with a 3/16” walled tub • Heavy ‘T’ guide rails with 2” steel rollers on the rail axis • Dual linear slides on the cross axis • Helical gear rack for precision and a fully enclosed power track for potecon • Synchronized AC brushless servo motors drive direct coupled precision gear boxes, which ride on pneumac pre-loaders • Full moon and nesng soſtware are standard features • Opons: straightline bevel, oxy-fuel cung, scribe, drills & integrated pipe cuers True Hole Production Class CNC Plasma Systems Each system comes with a complete soſtware package that’s ready for producon. In addion, Hypertherm has many opons available for ProNest as well. Water tables feature manual valve water level control, allowing water levels from a dry boom to full table in 3 minutes and back to a dry boom in another 3 minutes. Our downdraſt tables are pneumacally zoned to reduce the collecon area to no more than 4 lineal feet at one me, thus reducing the CFM requirements and increasing efficiency. Water tables are a much more effecve system for collecng the dust and smoke emissions inherent to the plasma cuer. © 2016 Victory CNC Plasma Systems Printed in Owensboro, KY USA www.victoryplasma.com TH_REV_1607 877.683.6844 Sales | [email protected] 1500 Bluff Ave., Owensboro, KY 42303 | victoryplasma.com • Phoenix cung soſtware • 19” touchscreen • Quadcore processor and internal Solid State drive • Hypertherm Phoenix® soſtware & SureCut technology • Wifi and USB are standard • Watch Windows for real-me monitoring • Integrated communicaons with plasma & torch height control • Designed for plasma marking & cung (including tube/pipe), oxy-fuel cung • EtherCAT single cable connecon for CNC controller, drives & HPR plasma • Remote Help enables diagnosis and repair over the Internet EDGE Pro Controller Features True Hole is effecve for holes up to 1” diameter and hole diameter to thickness raos from 2.5 to as low as 1:1. True Hole is a combinaon of the following, linked to given amperage, material type, material thickness and hole size: • Process gas type • Piercing methodology • Gas flow • Lead in/lead out technique • Amperage • Cut speed • Phoenix cung soſtware System Features Each machine is completed with plasma cuer installed and fully tested in our plant before shipment. We deliver and set the machine up ready for producon and we stay with you for hands on operaonal training. All Victory systems are to easy to operate, easy to maintain and built to last. We manufacture, market and support all our equipment.