TRUCK MOUNTED 680 MIXER - farmaidmfg.com Truck Presentation.pdftruck frame. Measurements are taken of the frame and 3/8” steel plate is custom cut to fit ... We custom design a mount

TRUCK MOUNTED

680 MIXER The “REEL” Efficient TMR Mixer

680 Cu. Ft. Mixer

Feed is conveyed from this device. It’s height is hydraulically adjusted. The conveyor chain is powered hydraulically.

There is a hydraulically operated door between the mixing tank and the conveyor to modulate feed flow.

PTO and pump mounted on the side of the transmission.

55 Gallon hydraulic reservoir

The 680 mixer is mounted on a frame. The frame is included in the mixer price. The mixer frame is bolted to the truck on 4 corners.

Mounting bolts

2002 4300 International

Allison 3060P transmission

Our frame starts out as a 6” X 6” steel tube. The tube is cut out so that the cut tube straddles the truck frame. Measurements are taken of the frame and 3/8” steel plate is custom cut to fit the truck frame.

Weigh bar

Electric over oil control valve for all hydraulic functions on the mixer.

Hydraulic motor to drive mixer

Door opening indicator Hydraulic

oil filter

The aluminum control box mounted inside the cab.

We custom design a mount to hold on and install poly fenders with no welding on the truck frame.

We custom design and build a rear bumper with LED stop/turn/tail lights and 5 clearance lights. Two incandescent back up lamps and two license plate

illumination lamps are included.