Troubleshooting Guide for Orca Smoke Alarms Problem Cause Solution Test function not operating. Alarm chirping intermittently as soon as battery is installed. Alarm keeps chirping intermittently after test function has been performed. Battery not installed correctly. Not holding test button long enough. Alarm has gone direct into programming the test mode. This is a normal procedure. Install battery properly. Push and hold button for up to 20 seconds or until alarm sounds. Leave alarm for 8-15 minutes. Chirping will silence as soon as alarm automatically resets itself. Leave alarm for 8-15 minutes. Chirping will silence as soon as alarm automatically resets itself. © ORCA MARKETING May 2009
Welcome message from author
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
Troubleshooting Guidefor
Orca Smoke AlarmsProblem Cause Solution
Test function not operating.
Alarm chirping intermittently as soon as battery is installed.
Alarm keeps chirping intermittently after test function has been performed.
Battery not installed correctly.
Not holding test button long enough.
Alarm has gone direct into programming the test mode.
This is a normal procedure.
Install battery properly.
Push and hold button for up to 20 seconds or until alarm sounds.
Leave alarm for 8-15 minutes. Chirping will silence as soon as alarm automatically resets itself.
Leave alarm for 8-15 minutes. Chirping will silence as soon as alarm automatically resets itself.
© ORCA MARKETING May 2009
Related Documents
