IR/RS232 Adapter The trivum RS232/Infrared Adaptor is an inter- face that sends infrared and RS232 commands to devices via UDP protocol. Due to the UDP support the adaptor can be addressed very easily (e.g. from the Gira HomeServer). The intelligent and practice- oriented software makes a complicated protocol unnecessary. Page/slot numbers are sufficient for a UDP request. trivum IR/RS232 Adaptor trivum technologies GmbH Heusteigstrasse 37 70180 Stuttgart phone: +49 711 64 56 07-10 fax: +49 711 64 56 07-16 [email protected] HTTP Thanks to the possibility to access infrared or RS232 commands via http requests it is e.g. possible to operate devices via a web browser (Safari, Firefox, IE) (as of Q3/2012). UDP The adaptor can also be controlled via a simple, text- based UDP protocol. KNX The adaptor can be easily integrated in Gira Home- Servers or Jung FAP applications. Thus, the control of external devices directly from these applications is extremely simplified. Infrared controlling The infrared commands filed in the adaptor are passed down to the external infrared transmitting diode 1:1. RS232 controlling The adaptor offers various possibilities for forwarding and receipt of data via RS232. IR learning Infrared codes can be taught due to the build-in infrared eye which is controlled by the software. Frequencies up to 500 kHz are supported. PoE The electric power supply of the adaptor can happen by means of the network cable via PoE (PowerOve- rEthernet) switches – or with an optionally available wall power supply. Easy addressing Commands (infrared / RS232) are filed in the adaptor in pages and slots, making the use of the adaptor extremely easy. Configuration The adaptor is configured with a PC application (Win- dows, Mac (as of Q3/2012)). Commands can be learnt (IR) or entered (RS232) and filed in pages/slots http udp PoE