T3 & T6 drawer system product assembly installation
SylentThe Sylent integrated cushioning system ensures consistent quiet and non-abrupt closing.
Sylent automatically adapts to varying closing speed and weight of the drawer to regulate the closing action. Sylent guarantees a flawless performance every time.
Ultimate Cabinet PartnerTrioMax is the epitome of refined elegance, operation simplicity, superior performance and application diversity.
Harn's commitment to quality and reliability makes TrioMax the ultimate partner to any cabinet. Its smooth running action and attractive design blend harmoniously with modern homes and kitchens.
60kg
35kg
Excellent PerformanceTrioMax comes in various load capacity to suit different storage requirements. The super smooth sliding action offers effortless opening and closing every time regardless of the drawer's load weight. Full extension design provides clear view and unrestricted access to drawer contents. The ergonomically friendly design makes TrioMax a delight to use.
Organiseplus
Utensils & crockery
This area is used for storage of cutlery, crockery & glassware. It's an area that is used on a daily basis.
The divider panels and lateral dividers helps to neatly organise and prevent slippage in stored items.
Cleaning & waste storageThe cleaning area is frequently used. It's interrelated to all other areas. Storage of cleaning utensils and materials must be easily accessible.
Waste storage and related items are usually stored below the sink. A sink pullout unit is an efficient way to make use of storage space.
Preparation & preparation utensilsPreparation area is where all ingredients are prepared for baking or cooking. Oil, sauces and utensils essential for food preparation are stored and can be accessed easily.
Cooking & heavy utensilsHeavy cooking utensils are kept nearby the stove and should be easy gain for use.
The full extension design allows for a full view and easy access to the stored contents.
Consumables & perishablesStorage area for consumable and perishable goods are stored here. The stored items may be retrieved for further preparation or consumed directly.
Larder units ample in space and well organised will be able to provide access from the front and sides.
40
46
47
50
55
Steel Back
Accessories
Assembly, Removal and Adjustment
Jigs and Devices
5
Drawer TStandard Drawer Standard Inner DrawerDrawer Height - 115mm
Drawer SStandard Drawer Standard Inner DrawerDrawer Height - 83mm
Drawer MSRailing M Standard Drawer Railing M Inner DrawerDrawer Height - 140mm
Drawer HSDouble Railing H Standard Drawer Double Railing H Inner DrawerDrawer Height - 204mm
Drawer HSSide Extend H Standard Drawer Side Extend H Inner DrawerDrawer Height - 204mm
Filing System
Sink Cabinet
Organiseplus
39
30
28
24
20
26
22
14
10 12
6 8
16
Drawer MTRailing M Standard Drawer Drawer Height - 172mm
18
Larder Unit
4442
Colour Code XXStandard : 01 - R9010 White 22 - R9006 Grey Metallic 24 - R7037 Dust GreyAvailable upon request : 21 - R7004 Grey 27 - Anthracite
6
TRIOMAXStandard Drawer - S
2
5
4
31
Rear Fixing Bracket Left / Right :
RBR.76030.XX
Steel Back see page 46
Drawer SideLeft / Right :
Cabinet Profile Left / Right :galvanised
TM49.45.GITM49.50.GITM49.55.GI
TM43.27.GITM43.35.GITM43.40.GITM43.45.GITM43.50.GITM43.55.GI
270mm350mm400mm450mm500mm550mm
TD53F.27.XXTD53F.35.XXTD53F.40.XXTD53F.45.XXTD53F.50.XXTD53F.55.XX
TD53.27.XXTD53.35.XXTD53.40.XXTD53.45.XXTD53.50.XXTD53.55.XX
2X
2X2X2X
Front Fixing Bracket Left / Right :
Expansion
RBF.21030.NARBF.22030.NARBF.23030.NA
Screw- on Press-in
5
1 2
3
4
• Roller bearing concealed runners• Full extension with synchro control• Steel drawer side 83mm• Load capacity of 35kg & 60kg• Quick assembly• Flexible 2-dimensional front adjustment• Sylent integrated cushioning system• Integrated lateral stabiliser
Cover Cap-harn Logo
RBC.62030-L1.XX
Drawer Length 35kg 60kg For Press-inBack Panel
7
Cutting Dimensions for 16mm Chipboard
Space Requirements and Front Installation Dimensions Back Installation Dimensions
Cabinet Profile Screw Positions
Min. internal cabinet depth = drawer length + 3 mmActual loss of extension = 0 mm
Min. internal cabinet depth = drawer length + 3 mmActual loss of extension = 0 mm
Drawer Length
TM43
TM49
270, 350, 400 mm
450, 500 mm
550 mm
Drawer Length
450, 500 mm
550 mm
Drilling Template see page 56
Pre-drill Ø5mm x 9mm deep9
53
Pre-drilling Dimensions ofBottom Panel for Fixing Euro Screws
Back panelWidth = internal cabinet width - 79mmHeight = 84mm
Bottom panelWidth = Internal cabinet width - 68mmLength (wooden back) = drawer length - 24 mmLength (steel back) = drawer length - 22 mm
9
2032
32
min
. 63.
5m
in.
33
93
For press-in andexpansion frontfixing brackets to pre-drillØ10mm x 12mm
Front overlay17Bottom panel width + 34mm
47.5
32
3434
min
49.
5
Drawer widths greater than 800mm mustaffix screw at rear most screw hole foradded stability. See page 49.
Wooden Back panel drilling forTD53F/TD55F see page 49
Built in tolerancecompensation 1mm+_
224192
64 32
64 325
937
32
32
3732
59
160192
224
Colour Code XXStandard : 01 - R9010 White 22 - R9006 Grey Metallic 24 - R7037 Dust GreyAvailable upon request : 21 - R7004 Grey 27 - Anthracite
Front Fixing Bracket Left / Right :
RBF.56130.XX
5
Included one piece 206.000
8
• Roller bearing concealed runners• Full extension with synchro control• Steel drawer side 83mm• Load capacity of 35kg & 60kg• Quick assembly• Sylent integrated cushioning system• Integrated lateral stabiliser
TRIOMAXInner Drawer - S
2
6
4 5
31
4
Drawer Length
Drawer SideLeft / Right :
270mm350mm400mm450mm500mm550mm
Cover Cap-harn Logo
RBC.62030-L1.XX
Steel Back see page 46Front Panel
400mm RPF861.285.XX450mm RPF861.335.XX500mm RPF861.385.XX550mm RPF861.435.XX600mm RPF861.485.XX900mm RPF861.785.XX1000mm RPF861.885.XX1200mm RPF861.1085.XX
RBR.76030.XX
Rear Fixing BracketLeft / Right :
Cabinet Width(16mm side panel)
2X
1 2
3
4
6
Cabinet Profile Left / Right :galvanised
TM49.45.GITM49.50.GITM49.55.GI
TM43.27.GITM43.35.GITM43.40.GITM43.45.GITM43.50.GITM43.55.GI
35kg 60kg
TD53F.27.XXTD53F.35.XXTD53F.40.XXTD53F.45.XXTD53F.50.XXTD53F.55.XX
TD53.27.XXTD53.35.XXTD53.40.XXTD53.45.XXTD53.50.XXTD53.55.XX
For Press-inBack Panel
9
Cutting Dimensions for 16mm Chipboard
Space Requirements and Front Installation Dimensions Back Installation Dimensions
Cabinet Profile Screw Positions
Drilling Template see page 56
Pre-drill Ø5mm x 9mm deep9
53
Pre-drilling Dimensions ofBottom Panel for Fixing Euro Screws
93
Cutting Dimensions for Front Panel
Width = Internal cabinet width - 82mm
4
Back panelWidth = internal cabinet width - 79mmHeight = 84mm
Bottom panelWidth = Internal cabinet width - 68mmLength (wooden back) = drawer length - 24 mmLength (steel back) = drawer length - 22 mm
20
9
3232
3434
min
. 103
.5m
in. 3
3
Min. internal cabinet depth = drawer length + 12 mmActual loss of extension = 9 mm
Min. internal cabinet depth = drawer length + 12 mmActual loss of extension = 9 mm
Drawer Length
TM43
TM49
270, 350, 400 mm
450, 500 mm
550 mm
Drawer Length
450, 500 mm
550 mm
Drawer widths greater than 800mm mustaffix screw at rear most screw hole foradded stability. See page 49.
Built in tolerancecompensation 1mm+_
Wooden Back panel drilling forTD53F/TD55F see page 49
min
49.
5
3264
3264
32
32
32
37
37
149
160192
224
192224
914
Colour Code XXStandard : 01 - R9010 White 22 - R9006 Grey Metallic 24 - R7037 Dust GreyAvailable upon request : 21 - R7004 Grey 27 - Anthracite
10
TRIOMAXStandard Drawer - T
Rear Fixing Bracket Left / Right :
RBR.76830.XX
Steel Back
Drawer SideLeft / Right :
400mm450mm500mm550mm
TD55F.40.XXTD55F.45.XXTD55F.50.XXTD55F.55.XX
TD55.40.XXTD55.45.XXTD55.50.XXTD55.55.XX
2X
2X2X2X
Front Fixing Bracket Left / Right :
Expansion
RBF.21030.NARBF.22030.NARBF.23030.NA
Screw- on Press-in
5
1 2
3
4
• Roller bearing concealed runners• Full extension with synchro control• Steel drawer side 115mm• Load capacity of 35kg & 60kg• Quick assembly• Flexible 2-dimensional front adjustment• Sylent integrated cushioning system• Integrated lateral stabiliser
Cover Cap-harn Logo
RBC.62030-L1.XX
Drawer Length
see page 46
For Press-inBack Panel
Cabinet Profile Left / Right :galvanised
TM49.45.GITM49.50.GITM49.55.GI
TM43.40.GITM43.45.GITM43.50.GITM43.55.GI
35kg 60kg
2
5
31
4
11
Cutting Dimensions for 16mm Chipboard
Space Requirements and Front Installation Dimensions Back Installation Dimensions
Cabinet Profile Screw Positions
Drilling Template see page 56
Pre-drill Ø5mm x 9mm deep9
53
Pre-drilling Dimensions ofBottom Panel for Fixing Euro Screws
Back panelWidth = internal cabinet width - 79mmHeight = 116mm
Bottom panelWidth = Internal cabinet width - 68mmLength (wooden back) = drawer length - 24 mmLength (steel back) = drawer length - 22 mm
125
34
Bottom panel width + 34mm
min
95.
5m
in 3
3
34
32
17
47.5
Front overlay
For press-in and expantion front fixing bracketsto pre-drillØ10mm x 12mm 20
3232
32
9
Drawer widths greater than 800mm mustaffix screw at rear most screw hole foradded stability. See page 49.
Built in tolerancecompensation 1mm+_
Wooden Back panel drilling forTD53F/TD55F see page 49
min
49.
5
Drawer Length
TM43
TM49
400 mm
450, 500 mm
550 mm
Drawer Length
450, 500 mm
550 mm
Min. internal cabinet depth = drawer length + 3 mmActual loss of extension = 0 mm
Min. internal cabinet depth = drawer length + 3 mmActual loss of extension = 0 mm
224192
64 32
64 325
937
32
32
3732
59
160192
224
Colour Code XXStandard : 01 - R9010 White 22 - R9006 Grey Metallic 24 - R7037 Dust GreyAvailable upon request : 21 - R7004 Grey 27 - Anthracite
Front Fixing Bracket Left / Right :
RBF.56930.XX
5
Included one piece 206.000
Steel Back see page 46Front Panel
400mm RPF861.285.XX450mm RPF861.335.XX500mm RPF861.385.XX550mm RPF861.435.XX600mm RPF861.485.XX900mm RPF861.785.XX1000mm RPF861.885.XX1200mm RPF861.1085.XX
RBR.76830.XX
Rear Fixing BracketLeft / Right :
Cabinet Width(16mm side panel)
4
6
12
TRIOMAXInner Drawer - T
Drawer SideLeft / Right :
400mm450mm500mm550mm
2X
1 2
3
• Roller bearing concealed runners• Full extension with synchro control• Steel drawer side 115mm• Load capacity of 35kg & 60kg• Quick assembly• Sylent integrated cushioning system• Integrated lateral stabiliser
Cover Cap-harn Logo
RBC.62030-L1.XX
Drawer Length
Cabinet Profile Left / Right :galvanised
TM49.45.GITM49.50.GITM49.55.GI
TM43.40.GITM43.45.GITM43.50.GITM43.55.GI
60kg35kg
2
6
45
31
For Press-inBack Panel
TD55F.40.XXTD55F.45.XXTD55F.50.XXTD55F.55.XX
TD55.40.XXTD55.45.XXTD55.50.XXTD55.55.XX
13
Cutting Dimensions for 16mm Chipboard
Space Requirements and Front Installation Dimensions Back Installation Dimensions
Cabinet Profile Screw Positions
Drilling Template see page 56
Pre-drill Ø5mm x 9mm deep9
53
Pre-drilling Dimensions ofBottom Panel for Fixing Euro Screws
Back panelWidth = internal cabinet width - 79mmHeight = 116mm
Bottom panelWidth = Internal cabinet width - 68mmLength (wooden back) = drawer length - 24 mmLength (steel back) = drawer length - 22 mm
Width = Internal cabinet width - 82mm
Cutting Dimensions for Front PanelDrawer widths greater than 800mm mustaffix screw at rear most screw hole foradded stability. See page 49.
Built in tolerancecompensation 1mm+_
34
min
103
125
min
33
34
2032
3232
9
Min. internal cabinet depth = drawer length + 12 mmActual loss of extension = 9 mm
Min. internal cabinet depth = drawer length + 12 mmActual loss of extension = 9 mm
3264
3264
32
32
32
37
37
149
160192
224
192224
914
Wooden Back panel drilling forTD53F/TD55F see page 49
min
49.
5
Drawer Length
TM43
TM49
400 mm
450, 500 mm
550 mm
Drawer Length
450, 500 mm
550 mm
Colour Code XXStandard : 01 - R9010 White 22 - R9006 Grey Metallic 24 - R7037 Dust GreyAvailable upon request : 21 - R7004 Grey 27 - Anthracite
2
6
5
4
3
1
14
• Roller bearing concealed runners• Full extension with synchro control• Steel drawer side 83mm• Load capacity of 35kg & 60kg• Quick assembly• Flexible 3-dimensional front adjustment• Sylent integrated cushioning system• Integrated lateral stabiliser
TRIOMAXStandard Drawer - MS
Drawer Length
Drawer SideLeft / Right :
350mm400mm450mm500mm550mm
Front Fixing Bracket Left / Right :
Expansion
RBF.21030.NARBF.22030.NARBF.23030.NA
Screw- on Press-in
Railing SetLeft / Right :
Rear Fixing Bracket Left / Right :
RBR.77030.XX
Steel Back see page 46
2X
2X2X2X
1 2
4
5
3
6
Cover Cap-harn Logo
RBC.62030-L1.XX
RRAS-NE.318.XXRRAS-NE.368.XXRRAS-NE.418.XXRRAS-NE.468.XXRRAS-NE.518.XX
Inclusive of Screw-on andExpansion railing adaptor
TD53F.35.XXTD53F.40.XXTD53F.45.XXTD53F.50.XXTD53F.55.XX
TD53.35.XXTD53.40.XXTD53.45.XXTD53.50.XXTD53.55.XX
For Press-inBack Panel
Cabinet Profile Left / Right :galvanised
TM49.45.GITM49.50.GITM49.55.GI
TM43.35.GITM43.40.GITM43.45.GITM43.50.GITM43.55.GI
35kg 60kg
15
Cutting Dimensions for 16mm Chipboard
Space Requirements and Front Installation Dimensions Back Installation Dimensions
Cabinet Profile Screw Positions
Drilling Template see page 56
Pre-drill Ø5mm x 9mm deep9
53
Pre-drilling Dimensions ofBottom Panel for Fixing Euro Screws
93
min
. 124
min
. 33
6432
47.5
Front overlay17Bottom panel width + 34mm
For press-in andexpansion frontfixing brackets to pre-drillØ10mm x 12mm
For Expansion Railingto pre-drillØ10mm x 12mm
Back panelWidth = internal cabinet width - 79mmHeight = 142mm
Bottom panelWidth = Internal cabinet width - 68mmLength (wooden back) = drawer length - 24 mmLength (steel back) = drawer length - 22 mm
3434 Built in tolerancecompensation 1mm+_
Drawer Length
TM43
TM49
350, 400 mm
450, 500 mm
550 mm
Drawer Length
450, 500 mm
550 mm
146
9
6432
32
Drawer widths greater than 800mm mustaffix screw at rear most screw hole foradded stability. See page 49.
Wooden Back panel drilling forTD53F/TD55F see page 49
min
49.
5
Min. internal cabinet depth = drawer length + 3 mmActual loss of extension = 0 mm
Min. internal cabinet depth = drawer length + 3 mmActual loss of extension = 0 mm
224192
64 32
64 325
937
32
32
3732
59
160192
224
Colour Code XXStandard : 01 - R9010 White 22 - R9006 Grey Metallic 24 - R7037 Dust GreyAvailable upon request : 21 - R7004 Grey 27 - Anthracite
Rear Fixing Bracket Left / Right :
RBR.77030.XX
Steel Back see page 46
6
16
• Roller bearing concealed runners• Full extension with synchro control• Steel drawer side 83mm• Load capacity of 35kg & 60kg• Quick assembly• Sylent integrated cushioning system• Integrated lateral stabiliser
TRIOMAXInner Drawer - MS
Drawer Length
Drawer SideLeft / Right :
350mm400mm450mm500mm550mm
Railing SetLeft / Right :
Front Fixing Bracket Left / Right :
RBF.57130.XX
Front Panel
Cabinet Width(16mm side panel)
400mm RPF861.285.XX450mm RPF861.335.XX500mm RPF861.385.XX550mm RPF861.435.XX600mm RPF861.485.XX900mm RPF861.785.XX1000mm RPF861.885.XX1200mm RPF861.1085.XX
7
5
2X
1 2
4
3
5
7Cover Cap-harn Logo
RBC.62030-L1.XX
Included one piece 206.000
Inclusive of Screw-on andExpansion railing adaptor
Cabinet Profile Left / Right :galvanised
TM49.45.GITM49.50.GITM49.55.GI
TM43.35.GITM43.40.GITM43.45.GITM43.50.GITM43.55.GI
35kg 60kg
2
6
4
3
1
TD53F.35.XXTD53F.40.XXTD53F.45.XXTD53F.50.XXTD53F.55.XX
TD53.35.XXTD53.40.XXTD53.45.XXTD53.50.XXTD53.55.XX
For Press-inBack Panel
RRAS-NE.318.XXRRAS-NE.368.XXRRAS-NE.418.XXRRAS-NE.468.XXRRAS-NE.518.XX
17
Cutting Dimensions for 16mm Chipboard
Space Requirements and Front Installation Dimensions Back Installation Dimensions
Cabinet Profile Screw Positions
Drilling Template see page 56
Pre-drill Ø5mm x 9mm deep9
53
Pre-drilling Dimensions ofBottom Panel for Fixing Euro Screws
Width = Internal cabinet width - 82mm
Back panelWidth = internal cabinet width - 79mmHeight = 142mm
Bottom panelWidth = Internal cabinet width - 68mmLength (wooden back) = drawer length - 24 mmLength (steel back) = drawer length - 22 mm
Cutting Dimensions for Front Panel
93
min
. 124
min
. 33
3434
146
9
6432
32
Drawer widths greater than 800mm mustaffix screw at rear most screw hole foradded stability. See page 49.
Built in tolerancecompensation 1mm+_
Wooden Back panel drilling forTD53F/TD55F see page 49
min
49.
5
Drawer Length
TM43
TM49
350, 400 mm
450, 500 mm
550 mm
Drawer Length
450, 500 mm
550 mm
Min. internal cabinet depth = drawer length + 12 mmActual loss of extension = 9 mm
Min. internal cabinet depth = drawer length + 12 mmActual loss of extension = 9 mm
3264
3264
32
32
32
37
37
149
160192
224
192224
914
Colour Code XXStandard : 01 - R9010 White 22 - R9006 Grey Metallic 24 - R7037 Dust GreyAvailable upon request : 21 - R7004 Grey 27 - Anthracite
Front Fixing Bracket Left / Right :
Expansion
RBF.21030.NARBF.22030.NARBF.23030.NA
Screw- on Press-in
Rear Fixing Bracket Left / Right :
RBR.77830.XX
Steel Back see page 46
2X2X2X
5
6
18
TRIOMAXStandard Drawer - MT
Drawer SideLeft / Right :
400mm450mm500mm550mm
2X
1 2
4
• Roller bearing concealed runners• Full extension with synchro control• Steel drawer side 115mm• Load capacity of 35kg & 60kg• Quick assembly• Flexible 3-dimensional front adjustment• Sylent integrated cushioning system• Integrated lateral stabiliser
Cover Cap-harn Logo
RBC.62030-L1.XX
Drawer Length
Railing SetLeft / Right :
3
RRAS-NE.368.XXRRAS-NE.418.XXRRAS-NE.468.XXRRAS-NE.518.XX
Inclusive of Screw-on andExpansion railing adaptor
Cabinet Profile Left / Right :galvanised
TM49.45.GITM49.50.GITM49.55.GI
TM43.40.GITM43.45.GITM43.50.GITM43.55.GI
60kg35kg
2
6
5
3
41
TD55F.40.XXTD55F.45.XXTD55F.50.XXTD55F.55.XX
TD55.40.XXTD55.45.XXTD55.50.XXTD55.55.XX
For Press-inBack Panel
19
Cutting Dimensions for 16mm Chipboard
Space Requirements and Front Installation Dimensions Back Installation Dimensions
Cabinet Profile Screw Positions
Drilling Template see page 56
Pre-drill Ø5mm x 9mm deep9
53
Pre-drilling Dimensions ofBottom Panel for Fixing Euro Screws
Back panelWidth = internal cabinet width - 79mmHeight = 174mm
Bottom panelWidth = Internal cabinet width - 68mmLength (wooden back) = drawer length - 24 mmLength (steel back) = drawer length - 22 mm
9
646
1432
3232
96
For press-in andexpansion frontfixing bracketsto pre-drillØ10mm x 12mm
For expansion railingto pre-drillØ10mm x 12mm
32
17 Front overlay
min
33
47.5
Bottom panel width + 34mm
3434
min
156
125
Min. internal cabinet depth = drawer length + 3 mmActual loss of extension = 0 mm
Min. internal cabinet depth = drawer length + 3 mmActual loss of extension = 0 mm
224192
64 32
64 325
937
32
32
3732
59
160192
224
Drawer widths greater than 800mm mustaffix screw at rear most screw hole foradded stability. See page 49.
Built in tolerancecompensation 1mm+_
Wooden Back panel drilling forTD53F/TD55F see page 49
min
49.
5
Drawer Length
TM43
TM49
400 mm
450, 500 mm
550 mm
Drawer Length
450, 500 mm
550 mm
Colour Code XXStandard : 01 - R9010 White 22 - R9006 Grey Metallic 24 - R7037 Dust GreyAvailable upon request : 21 - R7004 Grey 27 - Anthracite
5 Front Fixing Bracket Left / Right :
Expansion
RBF.21030.NARBF.22030.NARBF.23030.NA
Screw- on Press-in
20
• Roller bearing concealed runners• Full extension with synchro control• Steel drawer side 83mm• Load capacity of 35kg & 60kg• Quick assembly• Flexible 3-dimensional front adjustment• Sylent integrated cushioning system• Integrated lateral stabiliser
TRIOMAXStandard Drawer - Double Railing HS
Drawer SideLeft / Right :
350mm400mm450mm500mm550mm
1 2 Railing SetLeft / Right :
4
6 Rear Fixing Bracket Left / Right :
RBR.77030.XX
Steel Back n/a
7 Rear Fixing Bracket Left / Right :- add on
RBR.73030.XX
6
7
5
4
3
21
2X2X2X
2X
Drawer Length
Cover Cap-harn Logo
RBC.62030-L1.XX
3
Inclusive of Screw-on andExpansion railing adaptor
2X2X2X2X2X
TD53F.35.XXTD53F.40.XXTD53F.45.XXTD53F.50.XXTD53F.55.XX
TD53.35.XXTD53.40.XXTD53.45.XXTD53.50.XXTD53.55.XX
Cabinet Profile Left / Right :galvanised
TM49.45.GITM49.50.GITM49.55.GI
TM43.35.GITM43.40.GITM43.45.GITM43.50.GITM43.55.GI
35kg 60kg For Press-inBack Panel
RRAS-NE.318.XXRRAS-NE.368.XXRRAS-NE.418.XXRRAS-NE.468.XXRRAS-NE.518.XX
21
Cutting Dimensions for 16mm Chipboard
Space Requirements and Front Installation Dimensions Back Installation Dimensions
Cabinet Profile Screw Positions
Drilling Template see page 56
Pre-drill Ø5mm x 9mm deep9
53
Pre-drilling Dimensions ofBottom Panel for Fixing Euro Screws
326
66
3232
3214
9
64
Back panelWidth = internal cabinet width - 79mmHeight = 206mm
Bottom panelWidth = Internal cabinet width - 68mmLength (wooden back) = drawer length - 24 mmLength (steel back) = drawer length - 22 mm
6464
3247
.5
3434
min
. 196
min
. 33
Bottom panel width + 34mm17 Front overlay
93
For press-in andexpansion frontfixing brackets to pre-drillØ10mm x 12mm
For Expansion Railingto pre-drillØ10mm x 12mm
Built in tolerancecompensation 1mm+_
Drawer Length
TM43
TM49
350, 400 mm
450, 500 mm
550 mm
Drawer Length
450, 500 mm
550 mm
Min. internal cabinet depth = drawer length + 3 mmActual loss of extension = 0 mm
Min. internal cabinet depth = drawer length + 3 mmActual loss of extension = 0 mm
224192
64 32
64 325
937
32
32
3732
59
160192
224
Drawer widths greater than 800mm mustaffix screw at rear most screw hole foradded stability. See page 49.
Wooden Back panel drilling forTD53F/TD55F see page 49
min
49.
5
Colour Code XXStandard : 01 - R9010 White 22 - R9006 Grey Metallic 24 - R7037 Dust GreyAvailable upon request : 21 - R7004 Grey 27 - Anthracite
Front Fixing Bracket Left / Right :
RBF.58130.XX
5
Included one piece 206.000
Doweled*
Rear Fixing Bracket Left / Right :
RBR.77030.XXSteel Back n/a
Rear Fixing Bracket Left / Right :- add on
RBR.73030.XX
6
7
22
• Roller bearing concealed runners• Full extension with synchro control• Steel drawer side 83mm• Load capacity of 35kg & 60kg• Quick assembly• Sylent integrated cushioning system• Integrated lateral stabiliser
TRIOMAXInner Drawer - Double Railing HS
Drawer Length
Drawer SideLeft / Right :
350mm400mm450mm500mm550mm
Front Panel
Railing SetLeft / Right :
RRF.305.XXRRF.355.XXRRF.405.XXRRF.455.XXRRF.505.XXRRF.805.XXRRF.905.XXRRF.1105 .XX
Cross Railing
Cabinet Width(16mm side panel)
400mm RPF861.285.XX450mm RPF861.335.XX500mm RPF861.385.XX550mm RPF861.435.XX600mm RPF861.485.XX900mm RPF861.785.XX1000mm RPF861.885.XX1200mm RPF861.1085.XX
6
7
41
3
8
5
9
2
2X
Cover Cap-harn Logo
RBC.62030-L1.XX
321
4 8 9
Inclusive of Screw-on andExpansion railing adaptor
2X2X2X2X2X
TD53F.35.XXTD53F.40.XXTD53F.45.XXTD53F.50.XXTD53F.55.XX
TD53.35.XXTD53.40.XXTD53.45.XXTD53.50.XXTD53.55.XX
For Press-inBack Panel
Cabinet Profile Left / Right :galvanised
TM49.45.GITM49.50.GITM49.55.GI
TM43.35.GITM43.40.GITM43.45.GITM43.50.GITM43.55.GI
35kg 60kg
RRAS-NE.318.XXRRAS-NE.368.XXRRAS-NE.418.XXRRAS-NE.468.XXRRAS-NE.518.XX
Min. internal cabinet depth = drawer length + 12 mmActual loss of extension = 9 mm
Min. internal cabinet depth = drawer length + 12 mmActual loss of extension = 9 mm
3264
3264
32
32
32
37
37
149
160192
224
192224
914
Drawer widths greater than 800mm must affix screw at rear most screw hole for added stability. See page 49.
Drawer Length
TM43
TM49
350, 400 mm
450, 500 mm
550 mm
Drawer Length
450, 500 mm
550 mm
Colour Code XXStandard : 01 - R9010 White 22 - R9006 Grey Metallic 24 - R7037 Dust GreyAvailable upon request : 21 - R7004 Grey 27 - Anthracite
Front Fixing Bracket Left / Right :
Expansion
RBF.21030.NARBF.22030.NARBF.23030.NA
Screw- on Press-in
24
• Roller bearing concealed runners• Full extension with synchro control• Steel drawer side 83mm• Load capacity of 35kg & 60kg• Quick assembly• Flexible 3-dimensional front adjustment• Sylent integrated cushioning system• Integrated lateral stabiliser
TRIOMAXStandard Drawer - Side Extend HS
Drawer Length
Drawer SideLeft / Right :
350mm400mm450mm500mm550mm
Railing SetLeft / Right :
Rear Fixing Bracket Left / Right :
RBR.78030.XX
Side Extend Left / Right :
RSE-HD.323.XXRSE-HD.373.XXRSE-HD.423.XXRSE-HD.473.XXRSE-HD.523.XX
Steel Back see page 46
Drawer Length Double-wallRSE-HE.323.28RSE-HE.373.28RSE-HE.423.28RSE-HE.473.28RSE-HE.523.28
ABS (Smoke Grey)350mm400mm450mm500mm550mm
2X
2X2X2X
Cover Cap-harn Logo
RBC.62030-L1.XX
1 2 3
7
6
5
4
2
6
5
7
4
3
1
Inclusive of Screw-on andExpansion railing adaptor
TD53F.35.XXTD53F.40.XXTD53F.45.XXTD53F.50.XXTD53F.55.XX
TD53.35.XXTD53.40.XXTD53.45.XXTD53.50.XXTD53.55.XX
Cabinet Profile Left / Right :galvanised
TM49.45.GITM49.50.GITM49.55.GI
TM43.35.GITM43.40.GITM43.45.GITM43.50.GITM43.55.GI
35kg 60kg For Press-inBack Panel
RRAS-NE.318.XXRRAS-NE.368.XXRRAS-NE.418.XXRRAS-NE.468.XXRRAS-NE.518.XX
25
Cutting Dimensions for 16mm Chipboard
Space Requirements and Front Installation Dimensions Back Installation Dimensions
Cabinet Profile Screw Positions
Drilling Template see page 56
Pre-drill Ø5mm x 9mm deep9
53
Pre-drilling Dimensions ofBottom Panel for Fixing Euro Screws
Back panelWidth = internal cabinet width - 79mmHeight = 206mm
Bottom panelWidth = Internal cabinet width - 68mmLength (wooden back) = drawer length - 24 mmLength (steel back) = drawer length - 22 mm
9
66
1432
3232
96
93
min
. 33
min
. 196 For press-in and
expansion frontfixing brackets to pre-drillØ10mm x 12mm
For Expansion Railingto pre-drillØ10mm x 12mm
Front overlayBottom panel width + 34mm
17
128
47.5
32
34 34Built in tolerancecompensation 1mm+_
Min. internal cabinet depth = drawer length + 3 mmActual loss of extension = 0 mm
Min. internal cabinet depth = drawer length + 3 mmActual loss of extension = 0 mm
224192
64 32
64 325
937
32
32
3732
59
160192
224
Drawer widths greater than 800mm mustaffix screw at rear most screw hole foradded stability. See page 49.
Wooden Back panel drilling forTD53F/TD55F see page 49
min
49.
5
Drawer Length
TM43
TM49
350, 400 mm
450, 500 mm
550 mm
Drawer Length
450, 500 mm
550 mm
Side Extend Left / Right :
RSE-HD.323.XXRSE-HD.373.XXRSE-HD.423.XXRSE-HD.473.XXRSE-HD.523.XX
Drawer Length Double-wallRSE-HE.323.28RSE-HE.373.28RSE-HE.423.28RSE-HE.473.28RSE-HE.523.28
ABS (Smoke Grey)350mm400mm450mm500mm550mm
7
Front Fixing Bracket Left / Right :
RBF.58130.XX
5
Included one piece 206.000
Colour Code XXStandard : 01 - R9010 White 22 - R9006 Grey Metallic 24 - R7037 Dust GreyAvailable upon request : 21 - R7004 Grey 27 - Anthracite
26
• Roller bearing concealed runners• Full extension with synchro control• Steel drawer side 83mm• Load capacity of 35kg & 60kg• Quick assembly• Sylent integrated cushioning system• Integrated lateral stabiliser
TRIOMAXInner Drawer - Side Extend HS
Drawer Length
Drawer SideLeft / Right :
270mm350mm400mm450mm500mm550mm
1 2
Front Panel
2
6
5
3
8
9
4
7
1
Railing SetLeft / Right :
3
9 Cross Railing
Cabinet Width(16mm side panel)
RRF.305.XXRRF.355.XXRRF.405.XXRRF.455.XXRRF.505.XXRRF.805.XXRRF.905.XXRRF.1105.XX
400mm RPF861.285.XX450mm RPF861.335.XX500mm RPF861.385.XX550mm RPF861.435.XX600mm RPF861.485.XX900mm RPF861.785.XX1000mm RPF861.885.XX1200mm RPF861.1085.XX
2X
Cover Cap-harn Logo
RBC.62030-L1.XX
84
Rear Fixing Bracket Left / Right :
RBR.78030.XX
Steel Back see page 46
6
Inclusive of Screw-on andExpansion railing adaptor
TD53F.35.XXTD53F.40.XXTD53F.45.XXTD53F.50.XXTD53F.55.XX
TD53.35.XXTD53.40.XXTD53.45.XXTD53.50.XXTD53.55.XX
For Press-inBack Panel
Cabinet Profile Left / Right :galvanised
TM49.45.GITM49.50.GITM49.55.GI
TM43.35.GITM43.40.GITM43.45.GITM43.50.GITM43.55.GI
35kg 60kg
RRAS-NE.318.XXRRAS-NE.368.XXRRAS-NE.418.XXRRAS-NE.468.XXRRAS-NE.518.XX
27
Cutting Dimensions for 16mm Chipboard
Space Requirements and Front Installation Dimensions Back Installation Dimensions
Cabinet Profile Screw Positions
Drilling Template see page 56
Pre-drill Ø5mm x 9mm deep9
53
Pre-drilling Dimensions ofBottom Panel for Fixing Euro Screws
Back panelWidth = internal cabinet width - 79mmHeight = 206mm
Bottom panelWidth = Internal cabinet width - 68mmLength (wooden back) = drawer length - 24 mmLength (steel back) = drawer length - 22 mm
Drawer widths greater than 800mm must affix screw at rear most screw hole for added stability. See page 49.
Drawer Length
TM43
TM49
350, 400 mm
450, 500 mm
550 mm
Drawer Length
450, 500 mm
550 mm
9
66
1432
3232
96
93
min
. 33
min
. 196
34 34Built in tolerancecompensation 1mm+_
Wooden Back panel drilling forTD53F/TD55F see page 49
min
49.
5
Min. internal cabinet depth = drawer length + 12 mmActual loss of extension = 9 mm
Min. internal cabinet depth = drawer length + 12 mmActual loss of extension = 9 mm
3264
3264
32
32
32
37
37
149
160192
224
192224
914
Doweled*
28
TRIOMAXFiling System
• Roller bearing concealed runners• Full extension with synchro control• Steel drawer side 83mm• Load capacity of 35kg & 60kg• Quick assembly• Flexible 2-dimensional front adjustment• Sylent integrated cushioning system• Integrated lateral stabiliser
Drawer Length
Drawer SideLeft / Right :
TM49.45.GITM49.50.GITM49.55.GI
450mm500mm550mm
TD53F.45.XXTD53F.50.XXTD53F.55.XX
TD53.45.XXTD53.50.XXTD53.55.XX
1 2 Side Hanging Rail Left / Right :
RMF.450T.XXRMF.500T.XXRMF.550T.XX
3
4 Cross Hanging Rail7
RMF-C.475.XX
1 4
2
6
78
5
3
Steel Back n/a
Expansion
Front Fixing Bracket Left / Right :
RBF.21030.NA
RBF.22030.NA
RBF.23030.NA
Rear Fixing Bracket Left / Right :
RBR.76030. XX
5
6
Screw- on
Press-in
Cross Hanging Rail Connector8
RFC.8600.NA2X for each Cross Hanging Rail2X
2X
2X
2X
Cover Cap-harn Logo
RBC.62030-L1.XX
Colour Code XXStandard : 01 - R9010 White 22 - R9006 Grey Metallic 24 - R7037 Dust GreyAvailable upon request : 21 - R7004 Grey 27 - Anthracite
Cabinet Profile Left / Right :galvanised
TM43.45.GITM43.50.GITM43.55.GI
35kg 60kg For Press-inBack Panel
29
Space Requirements and Front Installation Dimensions Back Installation Dimensions
Pre-drill Ø5mm x 9mm deep9
53
Cutting Dimensions for 16mm ChipboardCabinet Profile Screw Positions
Pre-drilling Dimensions ofBottom Panel for Fixing Euro ScrewsDrilling Template see page 56
Width = internal cabinet width - 92mm
min. drawer length = 450mminternal cabinet width = 410mm
Width = internal cabinet width - 92mm
Back panelWidth = internal cabinet width - 79mmHeight = 264mm
Bottom panelWidth = Internal cabinet width - 68mmLength (wooden back) = drawer length - 24 mmLength (steel back) = drawer length - 22 mm
DIN A4 Along Drawer LengthDIN A4 Along Drawer Width
329mm
329mm
Bottom Panel - 29mm
For press-in andexpansion frontfixing brackets to pre-drillØ10mm x 12mm
Drawer widths greater than 800mm must affix screw at rear most screw hole for added stability. See page 49.
9
3232
9
18.5
172.
5
min
. 33
min
. 267
93
47.5
32
Front overlay17Bottom panel width + 34mm
18.5
31.531.5
3434
166.
5
224192
64 32
64 325
937
Built in tolerancecompensation 1mm+_
Wooden Back panel drilling forTD53F/TD55F see page 49
min
49.
5
Min. internal cabinet depth = drawer length + 3 mmActual loss of extension = 0 mm
Min. internal cabinet depth = drawer length + 3 mmActual loss of extension = 0 mm
Drawer LengthTM43
TM49
450, 500 mm
550 mm
Drawer Length
450, 500 mm
550 mm
192224
32
325
937
Drawer Length Drawer Length Drawer Length
450mm RCI.45S2.SS500mm RCI.50S2.SS550mm RCI.55S2.SS
450mm RCI.45D3.SS500mm RCI.50D3.SS550mm RCI.55D3.SS
450mm RCI.45T4.SS500mm RCI.50T4.SS550mm RCI.55T4.SS
450mm RCI.45U2.SS500mm RCI.50U2.SS550mm RCI.55U2.SS
450mm RCI.45U3.SS500mm RCI.50U3.SS550mm RCI.55U3.SS
450mm RCI.45S3U.SS500mm RCI.50S3U.SS550mm RCI.55S3U.SS
X = Drawer Length - 26mm
x
450mm RCI.45S4U.SS500mm RCI.50S4U.SS550mm RCI.55S4U.SS
450mm RCI.45S3M.SS500mm RCI.50S3M.SS550mm RCI.55S3M.SS
Drawer Length Drawer Length Drawer Length
Drawer Length
Length Width
Drawer Length
TRIOMAXOrganiseplus - Cutlery Trays & Utensil Dividers
88x88mm RCI.110.A288x176mm RCI.110.A388x264mm RCI.110.A488x352mm RCI.110.A5
RCI.110.A9RCI.110.A10
88mm187mm
30
Cutlery Trays Utensil Cross Dividers Dimensions for Utensil Dividers
400
374285197
3502463939
42039
64394
32239
29564
22339
64207
64
31139
64306
64
32239
39
29564
64
Cutlery
31
450mm
500mm
550mm
550mm
500mm
450mm
450mm
500mm
550mm
500mm
450mm
550mm
450mm
500mm
550mm
550mm
500mm
450mm
550mm
500mm
450mm
550mm
500mm
DrawerLength
450mm
Cabinet width
RCI.XXS2.SS RCI.XXU2.SSRCI.XXD3.SS RCI.XXT4.SS
RCI.45U2.SS
RCI.50U2.SS
RCI.55U2.SS
700
1200
1000
900
800
x1x1 RCI.45T4.SS RCI.45D3.SS
x1
x1
RCI.55D3.SS
RCI.50D3.SS
x1
x1RCI.50T4.SS
RCI.55T4.SS
x2
x2
x2
RCI.50T4.SS
RCI.55T4.SS
RCI.45T4.SS
RCI.45S2.SS
RCI.50S2.SS
RCI.55S2.SS
x2RCI.50D3.SS
x2
x1
x1
x1
RCI.55D3.SS
RCI.45D3.SS
RCI.50D3.SS
RCI.55D3.SS x1
x1
x1
RCI.55T4.SS
RCI.50T4.SS
RCI.45T4.SS
x2
x1
x1
x1
x1
x1
x1
RCI.55D3.SS
RCI.50D3.SS
RCI.45D3.SS
RCI.45D3.SS
300-400
450-500
550-600
RCI.55S2.SS
RCI.50S2.SS
x1RCI.55D3.SS
x1
x1
x1RCI.45T4.SS
RCI.50T4.SS
RCI.55T4.SS
x1
x1
x1
x1
RCI.45D3.SS
RCI.50D3.SS
RCI.45S2.SS x1
x1
x1
x1
TRIOMAXOrganiseplus - Recommendation & Ordering Information
Miscellaneous
32
DrawerLength
450mm
500mm
550mm
500mm
450mm
550mm
450mm
500mm
550mm
450mm
500mm
550mm
450mm
500mm
550mm
550mm
500mm
450mm
550mm
500mm
450mm
550mm
500mm
450mm
Cabinet width
RCI.45U3.SS
RCI.55U3.SS
RCI.50U3.SS
RCI.55U2.SS
RCI.50U2.SS
RCI.45U2.SS
x1
x1
x1RCI.45S2.SS
RCI.50S2.SS
RCI.55S2.SS x1
x1
x1
x1
x1
x1RCI.45S2.SS
RCI.50S2.SS
RCI.55S2.SS
x2x1 RCI.45S3M.SS
RCI.50S3M.SS
RCI.55S3M.SS x1
x1
x2
x2
RCI.45S3M.SS
RCI.50S3M.SS
RCI.55S3M.SS x1
x1
x1
x2RCI.50S3M.SS
RCI.45S3M.SS
RCI.50S3M.SS
RCI.55S3M.SS
RCI.55S3M.SS
x1
x1
x1RCI.45S4U.SS
RCI.50S4U.SS
RCI.55S4U.SS
x2
x1
x1
x1
RCI.45S3M.SS
RCI.45S3M.SS
RCI.50S3M.SS
RCI.55S3M.SS
x2
x1
x1
x1
RCI.45S2.SS
RCI.50S2.SS
RCI.55S2.SS
x1
x1RCI.50S2.SS
RCI.55S2.SS
RCI.XXS2.SS RCI.XXU2.SS RCI.XXU3.SS RCI.XX4U.SS RCI.XXS3M.SS
x1
x2
x2
x2
RCI.45S2.SS
x1RCI.55S3M.SS
RCI.45S3M.SS
RCI.50S3M.SS x1
x1
550-600
450-500
300-400
700
900
800
1000
1200
TRIOMAXOrganiseplus - Recommendation & Ordering Information
Cleaning
33
450mm
500mm
550mm
500mm
450mm
550mm
450mm
500mm
550mm
550mm
500mm
450mm
550mm
500mm
450mm
550mm
500mm
DrawerLength
450mm
RCI.XXS2.SS RCI.XXU2.SS RCI.XXU3.SS RCI.XX4U.SS
Cabinet width
RCI.XXS3U.SS
900
1200
1000
800
700
600
RCI.45U3.SS
RCI.50U3.SS
RCI.55U3.SS
x1x1 RCI.50U2.SS RCI.50S2.SS
RCI.55S2.SS x1x1 RCI.55U2.SS
RCI.45S2.SS x1x1 RCI.45U2.SS
x1RCI.50S3U.SS
RCI.55S3U.SS
RCI.45S3U.SS
RCI.50S3U.SS
RCI.55S3U.SS
x1
x1
x1
x2
x2
x2
x1
RCI.45S3U.SS
RCI.55S3U.SS
RCI.45S3U.SS
RCI.50S3U.SS
x1
x1
x1
x1
x1
x1
x1 RCI.45S4U.SS
RCI.50S4U.SS
RCI.55S4U.SS
x1RCI.55S2.SS
RCI.45S2.SS
RCI.50S2.SS x1
x1
x1RCI.55S3U.SS
RCI.55S3U.SS
RCI.45S3U.SS
RCI.50S3U.SS
RCI.45S3U.SS
RCI.50S3U.SS x1
x1
x2
x2
x2
x1
x1RCI.50S4U.SS
RCI.55S4U.SS
x1RCI.45S4U.SS
TRIOMAXOrganiseplus - Recommendation & Ordering Information
Preparation
34
450mm
500mm
550mm
500mm
450mm
550mm
500mm
450mm
550mm
500mm
450mm
550mm
500mm
450mm
550mm
550mm
500mm
450mm
550mm
500mm
450mm
550mm
500mm
DrawerLength
450mm
Cabinet width
x2
x2
x2
x2
x2
x2
x1
x1
x1
x1
x1
x1
x1
x1
x1
RCI.55S2.SS
RCI.50S2.SS
RCI.45S2.SS
x1 RCI.45S3U.SS RCI.45U3.SS
RCI.50U3.SS
RCI.55U3.SS
x1
x1 RCI.55S3U.SS
RCI.50S3U.SS
x1
x1
x1
RCI.55U2.SS
RCI.50U2.SS
RCI.45U2.SS
RCI.55S3U.SS
RCI.50S3U.SS
RCI.45S3U.SS
RCI.50S3U.SS
RCI.55S3U.SS
RCI.50S3U.SS
RCI.45S3U.SS
RCI.55S3U.SS
RCI.45S3U.SS
x1
x1
x1RCI.45S4U.SS
RCI.50S4U.SS
RCI.55S4U.SS
x1
x1
x1RCI.45S4U.SS
RCI.50S4U.SS
RCI.55S4U.SS
x1
x1
x1
x1
x1
RCI.55S2.SS
RCI.50S2.SS
x1RCI.55U2.SS
RCI.55S3U.SS
RCI.50S3U.SS
RCI.45S3U.SS
x1
x1
RCI.50U2.SS
RCI.45U2.SS
x1RCI.45S2.SS
RCI.XXS2.SS RCI.XXU2.SS RCI.XXU3.SS RCI.XX4U.SSRCI.XXS3U.SS
550
400-500
300
600-700
800
1000
1200
900
TRIOMAXOrganiseplus - Recommendation & Ordering Information
Cooking Utensil
35
450mm
500mm
550mm
500mm
450mm
550mm
550mm
500mm
450mm
550mm
500mm
450mm
550mm
500mm
DrawerLength
450mm
Cabinet width
RCI.XXS2.SS RCI.XXU2.SS RCI.XXU3.SS RCI.XX4U.SSRCI.XXS3U.SS
RCI.45U2.SS
RCI.50U2.SS
RCI.55U2.SS
1000
1200
x1
x1
x1RCI.45S2.SS
RCI.50S2.SS
RCI.55S2.SS
900
800
600-700
x2x1 RCI.50S3U.SS RCI.50U3.SS
RCI.55U3.SS x2x1 RCI.55S3U.SS
RCI.45U3.SS
x1
x1
x1
x2x1
x1
x1
x1
RCI.45S3U.SS
RCI.45S3U.SS
RCI.50S3U.SS
RCI.55S3U.SS
RCI.55S4U.SS
RCI.50S4U.SS
RCI.45S4U.SS
RCI.50S4U.SS
RCI.55S4U.SS
x2RCI.55S3U.SS
x1
x1
x1RCI.45S3U.SS
RCI.50S3U.SS
RCI.55S3U.SS
x2
x2
RCI.45S3U.SS
RCI.50S3U.SS
x1
x1
x1
x1
x1
RCI.45S4U.SS x1
TRIOMAXOrganiseplus - Recommendation & Ordering Information
Colour Code XXStandard : 01 - R9010 White 22 - R9006 Grey Metallic 24 - R7037 Dust GreyAvailable upon request : 21 - R7004 Grey 27 - Anthracite
36
TRIOMAXDivider Panel
Cabinet Width(16mm side panel)
Divider PanelConnectorLeft / Right :
Divider Panel1 2 Lateral Divider
RLD.6600.XX
3
21
3
400mm450mm500mm550mm600mm900mm1000mm1200mm
Cutting Dimensions for Divider Panel
RPD.278.XXRPD.328.XXRPD.378.XXRPD.428.XXRPD.478.XXRPD.778.XXRPD.878.XXRPD.1078.XX
RPC.6100.XX
Width = Internal cabinet width - 89mm
Cross Railing
RRF.309.XXRRF.359.XXRRF.409.XXRRF.459.XXRRF.509.XXRRF.809.XXRRF.909.XXRRF.1109.XX
1 Cross RailingConnector
RRC.7200.XX
2
TRIOMAXDivider Railing
Cabinet Width(16mm side panel)
400mm450mm500mm550mm600mm900mm1000mm1200mm
2
1
Cutting Dimensions for Cross Railing
Width = Internal cabinet width - 58mm
37
2X for each Cross Railing
Colour Code XXStandard : 01 - R9010 White 22 - R9006 Grey Metallic 24 - R7037 Dust GreyAvailable upon request : 21 - R7004 Grey 27 - Anthracite
Divider Panel
Provisions
Crockery
Plastic Containers
Cleaning
Recycle / Waste Bins
38
x 1x 1400-550450,500,550
900-1200450,500,550 x 2 x 2
600-800
900-1000
300-400
800-1200
450-600
450,500,550
450,500,550
450,500,550
450,500,550
450,500,550
x 1
x 1
x 1
x 1
x 1
x 1
x 1
x 1
x 1
x 1
300-400
300-400
800-1200
450-600
800-1200
450-600
450
500,550
500,550
500,550
450
450
x 1
x 2
x 2
x 2
x 1
x 2
x 2
x 2
x 1
x 1
x 1
x 1
x 2
x 3
x 2
x 4
x 3
x 3
x 6
x 2
DrawerLength
Divider Panel ConnectorDivider Panel Lateral Divider
Cabinet width
900-1200450,500,550 x 2 x 2 x 5
TRIOMAXOrganiseplus - Recommendation & Ordering Information
Open Provisions
Bottles
Cooking Utensils
Baking / Ingredients
Divider Panel
39
DrawerLength
Divider Panel ConnectorDivider Panel
275-300
275-300
450
500,550
x 3
x 4
x 3
x 4
x 2
x 4
x 1x 1450 300-400
450-600
300-400
800-1200
450-600
800-1200500,550
450
500,550
500,550
450
x 2 x 2
x 1
x 2
x 2
x 1
x 1
x 2
x 2
x 1
x 6
x 2
x 3
x 3
800-1200
800-1200
600
600
500,550
500,550
450
450
x 2
x 2
x 2
x 2
x 1
x 1
x 1
x 1
x 3
x 6
x 2
x 3
Lateral Divider
Cabinet width
300-400
450-600
450-600
300-400
800-1200
800-1200
450
500,550
450
500,550
500,550
450
x 1x 1
x 2 x 2
x 1
x 2
x 2
x 1
x 1
x 2
x 2
x 1
x 6
x 2
x 3
x 3
TRIOMAXOrganiseplus - Recommendation & Ordering Information
Colour Code XXStandard : 01 - R9010 White 22 - R9006 Grey Metallic 24 - R7037 Dust GreyAvailable upon request : 21 - R7004 Grey 27 - Anthracite
Sink Cabinet Adapter Set Left / Right :
RBF.59230.XX
10
Railing Set for Sink DrawerLeft / Right :
RSE-HE.273.28RSE-HE.323.28RSE-HE.373.28
9
• Roller bearing concealed runners• Full extension with synchro control• Steel drawer side 83mm• Load capacity of 35kg & 60kg• Quick assembly• Flexible 3-dimensional front adjustment• Sylent integrated cushioning system• Integrated lateral stabiliser
TRIOMAXSink Cabinet Drawer
Drawer Length
Drawer Length Double-wall
Drawer SideLeft / Right :
450mm500mm550mm
TD53.45.XXTD53.50.XXTD53.55.XX
1 2
2
6
7
3
5 4
10
9
8
1
Side Extend Left / Right :Drawer Side
Side ExtendLeft / Right :Sink Drawer
450mm500mm550mm
7
Sink Drawer SideLeft / Right :
3
RSE-HD.423.XXRSE-HD.473.XXRSE-HD.523.XX
ABS (Smoke Grey)
RSE-HE.423.28RSE-HE.473.28RSE-HE.523.28
8
Rear Fixing Bracket Left / Right :
RBR.78030.XXSteel Back n/a
6
Front Fixing Bracket Left / Right :
RBF.21030.NARBF.22030.NARBF.23030.NA
Screw- on
Expansion Press-in
4X
2X2X2X
2X
Double-wall
RSE-HD.273.XXRSE-HD.323.XXRSE-HD.373.XX
ABS (Smoke Grey)
Cover Cap-harn Logo
RBC.62030-L1.XX
5
4
40
2X2X2X
Inclusive of Screw-on andExpansion railing adaptor
TD53.30.XXTD53.35.XXTD53.40.XX
TM49.45.GITM49.50.GITM49.55.GI
Cabinet Profile Left / Right : galvanised
TM43.45.GITM43.50.GITM43.55.GI
35kg 60kg
RRAS-NE.418.XXRRAS-NE.468.XXRRAS-NE.518.XX
Pre-drill Ø5mm x 9mm deep9
53
Drilling Template see page 561X
1X
-11mm -11mmX2
X2
ICW -68mm
ISW +57
ISW -11mmC
140
A
B1
Wooden backdrawer length - 24mm
53mm
Divider
Bottom Panel
B2 206mm
Back Panel
B1
B2A
C
ICW
ISW
Internal cabinet width
Internal width between sink drawer sides
X minX max
48 mm225 mm
Divider Dimensions
Space Requirements and Front Installation Dimensions Back Installation Dimensions
Cabinet Profile Screw Positions
Cutting Dimensions for 16mm Chipboard
min
196
min
33
Bottom panel width + 34mm
34 34
93
For expansion railing topre-drillØ10mm x 12mm
For press-in and expansion front fixing brackets to pre-drillØ10mm x12mm
9
53
188.
5
41
Pre-drilling Dimensions ofBottom Panel for Fixing Euro Screws
Built in tolerancecompensation 1mm+_
9
66
1432
3232
96
6464
79.5
ISW
X + 34mm 12
847
.532
17 Front overlay
Drawer widths greater than 800mm mustaffix screw at rear most screw hole foradded stability. See page 49.
Wooden Back panel drilling forTD53F/TD55F see page 49
min
49.
5
Drawer LengthTM43
TM49
450, 500 mm
550 mm
Drawer Length
450, 500 mm
550 mm
224192
64 32
64 325
937
Min. internal cabinet depth = drawer length + 3 mmActual loss of extension = 0 mm
Min. internal cabinet depth = drawer length + 3 mmActual loss of extension = 0 mm
192224
32
325
937
42
TRIOMAXLarder Unit
Standard Drawer-S connected to front
Inner Drawer - Double Railing HS
Standard Drawer - Side Extend HSconnected to front
Inner Drawer - S
Standard Drawer - Side Extend HSconnected to front
See page 6
See page 22
See page 24
See page 8
See page 24
1
2
3
4
5
1
2
3
4
5
43
Cabinet Width - 300 / 400mm
Space Requirements and Front Installation Dimensions
Important Notice:Minimum one drawer connected to the front must be equipped with a gallery to provide tilt adjustment and to ensure front stability.
Built in tolerancecompensation 1mm+_
Bottom panel width + 34mm min
. 49.
5
min
. 33
16 17
32
47.5
Front overlay
min
. 188
5
128
3212
860
8
1950
For Expansion Railingto pre-drillØ10mm x 12mm
For press-in and expantion frontfixing bracketsto pre-drillØ10mm x 12mm
34 34
3267
2
65.549
833.5817
481.5465
416
352
352
1665.51649
1185.51169
480
44
TRIOMAXLarder Unit with Door
See page 26
See page 26
See page 26
See page 26
See page 26
1
2
3
4
5
1
2
4
3
5
Inner Drawer - Side Extend HS
Inner Drawer - Side Extend HS
Inner Drawer - Side Extend HS
Inner Drawer - Side Extend HS
Inner Drawer - Side Extend HS
45
Space Requirements and Front Installation Dimensions
Drawer Locations Hinge Locations
37
3227
692
132
276
32
Recommended Cabinet Width450 - 600mm
Line boring information is based on cabinet base panel 16mm thick with 1mm bottom gap. Changes in thickness of the cabinet base panel and/or position of first drawer from bottom offsets all dimensions on the cabinet and front door.
16
Important Notice:Use hinges with zero door protrusion when opened at 90° angle and more, or Triomax Spacer. See page 47.
49
3217
65.5
951
691
431
1261
310
382
260
260
967.5
707.5
447.5
1277.5
Colour Code XXStandard : 01 - R9010 White 22 - R9006 Grey Metallic 24 - R7037 Dust GreyAvailable upon request : 21 - R7004 Grey 27 - Anthracite
TRIOMAXSteel Back
Drawer S
RSBT3.333.XX RSBT3.383.XX RSBT3.433.XX RSBT3.483.XX RSBT3.533.XX RSBT3.833.XX RSBT3.933.XX RSBT3.1133.XX
400mm450mm500mm550mm600mm900mm1000mm1200mm
Cabinet Width (16mm side panel)
400mm450mm500mm550mm600mm900mm1000mm1200mm
Drawer MS
RSBT3R.333.XX RSBT3R.383.XX RSBT3R.433.XX RSBT3R.483.XX RSBT3R.533.XX RSBT3R.833.XX RSBT3R.933.XX RSBT3R.1133.XX
Cabinet Width (16mm side panel)
400mm450mm500mm550mm600mm900mm1000mm1200mm
Drawer HS
RSBT3HR.333.XX RSBT3HR.383.XX RSBT3HR.433.XX RSBT3HR.483.XX RSBT3HR.533.XX RSBT3HR.833.XX RSBT3HR.933.XX RSBT3HR.1133.XX
Cabinet Width (16mm side panel)
400mm450mm500mm550mm600mm900mm1000mm1200mm
Drawer T
RSBT4.333.XX RSBT4.383.XX RSBT4.433.XX RSBT4.483.XX RSBT4.533.XX RSBT4.833.XX RSBT4.933.XX RSBT4.1133.XX
Cabinet Width (16mm side panel)
400mm450mm500mm550mm600mm900mm1000mm1200mm
Drawer MT
RSBT4R.333.XX RSBT4R.383.XX RSBT4R.433.XX RSBT4R.483.XX RSBT4R.533.XX RSBT4R.833.XX RSBT4R.933.XX RSBT4R.1133.XX
Cabinet Width (16mm side panel)
46
47
TRIOMAXAccessories
Chipboard Screws
Length15.0mm 350.15017.0mm 350.170
Ø7.0
Ø3.5
LSpecial Euro Screws
Length10.0mm 361.10011.5mm 361.11513.0mm 361.13014.5mm 361.145
Ø7.0
Ø6.0
Standard Drawer Front Locking Piece
201.000Included 2 pan head screws206.000
207.000
Inner Drawer Locking Piece
Dowels
501.115Ø10.5
11.5
Euro Screws
10.0mm 360.10011.5mm 360.11513.0mm 360.13014.5mm 360.14520.0mm 360.200
Length
Ø8.0
Ø6.0
Euro screw cabinet profile attachment. Article No. 360.145
Euro screw spacer attachment. Article No. 360.145
Chipboard screw spacer attachment. Article No. 350.170
A
B
C
2837
14 9 932
3728 9 9
16
16
25
Lite Grey
• Used to space cabinet profiles away from the cabinet side on internal drawer.• Use (2)pcs. per cabinet profile.
Cab
inet
Fro
nt E
dge
Triomax Spacer 25mm
ABC
48
TRIOMAXCabinet Profile Fixing Positions
Fixing onto cabinet
Front fixing hole at 37mm from edge
Standard Drawer Inner Drawer
Front fixing hole at 28mm from edgeStandard Drawer Inner Drawer
The 3rd hole on the cabinetprofile should be used toaffix the profile to the cabinet.
The 2nd hole on the cabinetprofile should be used toaffix the profile to the cabinet.
The 2nd hole on the cabinet profile should be used toaffix the profile to the cabinet.
The 1st hole on the cabinet profile should be used toaffix the profile to the cabinet.
A Chipboard Screws ø4 x 15
B Euro Screws Article No. 360.145
3737
2828
192
160
224
192
224
37
37
37
37
37
450, 500mm
450, 500mm
270, 350, 400mm
32
32
32
5
AB
64
1832
564
18
550mm
550mm
TM43
TM49
AB
49
TRIOMAXWide Drawer Stability
Organiseplus Cutlery Trays & Utensil Dividers Space Planning
Wooden Back Drilling For TD53F/TD55F
Example
Cabinet width : 600mmSide panel thickness : 16mmTray & Divider set : RCI.50T4.SS
Internal Cabinet Width = 600mm - (16mm x 2) - 1mm = 567mm
X = Internal Cabinet Width - 400mm - 39mm = 128mm
Drawer widths greater than 800mm must have screws fastenedat the rear most screw hole of the drawer bottom for added stability. Use Chipboard Screws 350.150 or equivalent.
400
26588
X 39
64
109
Drawer S Drawer MS
Drawer T Drawer MT
Drawer HS
1464
9
48+0 - 0
.5
Pre-drill Ø10mm12mm depth
3248
3214
9
[ ] Single Railing
Pre-drill Ø10mm12mm depth
+0 - 0.5
64
[96]
[32]
[14]
9
48+0 - 0
.580
12mm depthPre-drill Ø10mm9
12mm depthPre-drill Ø10mm
8080
14
9
+0 - 0.5
+0 - 0.5
Pre-drill Ø10mm12mm depth
50
Drawer S, T Assembly - Wooden Back
Drawer MS, MT, HS Assembly - Wooden Back
Drawer Assembly - Steel Back
Drawer Front Assembly and Removal
TRIOMAXAssembly, Removal and Adjustment
3
1 2
4 5
Assembly
Screw-on Expansion
1
1
2
3
1
2 4
1
2
3
4
32
1
1
1 2
3
4 5
55
22
'Click'
1
Removal
1
2
51
TRIOMAXAssembly, Removal and Adjustment
Railing Assembly
Side Extend Assembly
1
3
2
4
5
Sink Cabinet Drawer Assembly
6
78
9
1
23
4
ExpansionScrew-on
1
1 2
52
TRIOMAXAssembly, Removal and Adjustment Drawer Insertion
Drawer Removal
Drawer Front - Side Adjustment
Drawer Front - Height And Tilt Adjustment
'Click'
Height Adjustment
Bottom Release OR Side Release
Tilt Adjustment
Tighten
1
2
11 11
22 22
2
1
13
Door Buffer
+_1.8mm
2
Loosen
To right
Adjustable by 1.25mm to the right Adjustable by 1.25mm to the left
To left
311
2
1 1
3
1
2 3
1
2
1
53
TRIOMAXAssembly, Removal and Adjustment
Inner Drawer S Assembly / Removal
Inner Drawer Side Extend HS Assembly
Inner Drawer Double Railing HS Assembly
Inner Drawer Locking Piece Standard Drawer Locking Piece
Assembly
1
1
2
2
3
4
3
6
min 30mm
5
12
3
32
4 6
1
2
3 5
21
31
4
remove
remove
5
4
Removal
1
2
1
2
Space Requirements
min 10mm
7mm3
1 2
Colour Code XXStandard : 01 - R9010 White 22 - R9006 Grey Metallic 24 - R7037 Dust GreyAvailable upon request : 02 - R9001 Cream 21 - R7004 Grey 27 - Anthracite
OrganiseplusAssembly, Removal and AdjustmentCutlery Trays and Utensil Dividers
54
23
Divider Panel and Lateral Divider Assembly
Utensil Cross Divider Position Adjustment
Divider Railing / Filing Cross Hanging Rail Assembly
1 2
3
2
1
1
3
24
1
TRIOMAXMarking Devices
Application
Application
For marking single and double railing
RMD.91330.12
RMD.92130N.25
Article No.
Drawer Front Marking Jigs
Article No.
Railing Marking Template
55
TRIOMAXDrilling Jig
Application
Back panel - S Height
or
or
or
or
or
or
Back panel - M Height
Back panel - H Height
RMD.93300.25
For drilling or marking bottom panel and back panel
Included 1 unit ø5mm stop collar and 1 unit ø10mm stop collar
Bottom panel
Article No.
Drilling Template
56
2
3
4
4
1
1
2
1
2 3
1
2
3
32
69
32
53
48
2032
32
32 3232 32
48
3232
3232
20
20
48
3232
48
32
2032
20
3
9
53
57
TRIOMAXKnock In Tool
Application
RME.95131.25
Article No.
Knock In ToolFor manual installation of Triomax Press In Front Fixing Brackets RBF.22030.NA
TRIOMAXAssembly Devices - Drawer Assembly Jig
Article No.
58
• Designed for TD53 and TD55 drawer assembly• Drawer side lengths 270 to 550 mm• Cabinet widths 275 to 1200 mm• Maximum back panel height of 210mm
Setting desired drawer length and width. Insert back and bottom panels. Slide in drawer sides. Activate locking clamps to hold drawer together.
Secure bottom panel using screws or integrated spikes.
Secure back panel using screws.
Application
Assembly Jig
RMM.98030.AL
1 2
3 4
Subject to technical modifications and changes to the range without notice.7007EN-2Printed in Malaysia June 2012
ISO 9001
BUREAU VERITASCertification
Subject to technical modifications and changes to the range without notice.
Aksesori Setia Sdn.Bhd.Company No. 326521-U
Plot 32, Lengkok Rishah 1,Kawasan Perindustrian Silibin,30100 Ipoh, Perak, Malaysia.Tel : (60) 5 - 527 6055Fax : (60) 5 - 527 6063E-mail : [email protected]