Transportation Products Catalog
Contents
Introduction- About AMETEK
- Transportation Sales Team
- Bus Products Distributors Contacts
- Locomotive Parts Distribution/Bus and Rail Products Repair Facility
- Transportation Products Warranty
Seal-less Water Circulation PumpsDURA-TEK 3.0 Inch Brushless DC Seal-less Pump (12 Gallon)15 GPM Seal-less Pump with Brushless Motor (15 Gallon)47 Frame Brushless Seal-less Pump (18 Gallon)SLP2418 Seal-less Pump with Brushless Motor (20 Gallon)64 Frame Brushless Seal-less Pump (26 Gallon)
Brushless MotorsDriver’s Booster Blower MotorDURA-TEK 3.0 Inch Brushless DC Motor47 Frame Brushless DC Motor64 Frame Brushless DC Motor
64 Frame Evaporator Motors for Coach A/C SystemsModel - 150214-00Model - 150215-00Model - 150355-00Model - 151140-00
FansRTP10 Brushless DC FanRTP14 Brushless DC FanRTP16 Brushless DC FanRTP16S Brushless DC Fan
BlowersRTP1300 Brushless DC BlowerRTP1400 Brushless DC BlowerRTP1600 Brushless DC Blower
AMETEKElectromechanical Group (EMG) …
Is one of the world’s largest producers of high-speed electric motor products for original equipment
manufacturers (OEMs). In business since 1915, EMG uses its core competencies in motion and air
movement products as engineered solutions for application-specific needs. A business unit of AMETEK EMG, Technical & Industrial Products offers Brushless
DC motor, blower, and controller-based solutions.
The standard product lines of AMETEK Precision Motion Control cover a wide range
of application demands. If there is a need for a product with unique performance, mounting, environment or
agency requirements, AMETEK can supply the solution. Whether a customer needs a standard or a special
design, AMETEK has the solution for your application. AMETEK offers economies of scale that only can be
accomplished by a company that produces more than 26 million motor products per year. With multi-plant
capability and flexibility, AMETEK is positioned to support our customers’ global programs.
AMETEK Brushless DC Motors, Blowers, Fans, Pumps, and Controllers are an ideal choice for such varied
applications as medical instruments, robotics, pumps, compressors, business equipment, fans, machine tools,
tape drives, printing, fuel cells, textiles or any other precise rotary motion/air delivery applications.
Transportation Sales Team
Transportation Sales Manager Keith Hallenbeck 100 E. Erie St Kent, OH 44240 Phone: 330-677-3335 E-Mail: [email protected]
Eastern Sales Region Technical Sales & Application Engineer Rotron Transportation Products Dynamic Fluid Solutions Business Unit Patrick Foley 7801 Yager Road Blossvale, NY 13308 Phone: 315-520-3874 E-Mail: [email protected]
Western Sales Region Technical Sales & Application Engineer Rotron Transportation Products Dynamic Fluid Solutions Business Unit Henry Roesler 21629 N. 261st Ave. Buckeye, AZ 85396 Phone: 928-252-2291 Cell: 330-715-8914 E-Mail: [email protected]
Bus Products Distribution Contacts
Gillig LLC New Flyer Industries25972 Eden Landing Rd. Aftermarket Parts Hayward, CA. 94545 Customer ServicePhone: 1-800-735-1500 Phone: 1-800-665-2637
Prevost Parts Motor Coach IndustriesParts Customer Service Service Parts Division2200 Point Blvd. 1700 E. Golf RdElgin, Il 60123 Schaumburg, IL. 60173U.S. Coach Phone: 800-621-5519 Phone: 847-285-2205Fax: 877-999-8809 Fax: 847-285-2222U.S. Transit Phone: 877-999-8808 Website: www.mcicoach.comFax: 877-999-8809Canada Phone: 800-463-8876 Fax: 800-939-0133Online ordering: www.prevostcar.com
ABC Companies-Muncie Division North American Bus Industries3720 S. Madison Street Aftermarket Parts DivisionMuncie, IN. 47302 1375 South Houk RoadPhone: 765-288-1971 Delaware, OH. 43015Fax: 765-286-0164 Phone: 740-369-1056www.abc-companies.com Fax: 740-363-5897
Locomotive Parts Distribution
Trinity Equipment Co. 3918 Holton Rd Muskegon, MI 49445 Phone: 231-557-6110 E Mail: [email protected]
Bus & Rail Products Repair Facility
Kirk’s Automotive Inc. 9330 Roselawn Detroit, MI 48204 Phone: 313-933-7030 Fax: 313-933-7073 E Mail: [email protected]
Transportation Products Warranty
The seller warrants to the buyer that all products to be delivered hereunder will befree from defects in material and workmanship for the time period listed below. The warranty does not cover damage in transit, damage resulting from mishan-dling by the buyer, his employees or customers, normal wear or improper use of application thereof. The foregoing warranty is in lieu of and excludes all other warranties expressed or implied (including any warranty of merchantability or fitness for purpose). If within the time period below, the buyer notifies the seller promptly that the products delivered hereunder do meet the warranty specified below, the seller will, at it’s option, issue credit, repair or replace any item or part thereof which is proved to be other than as warranted. The seller undertakes no liability and the buyer waives any claim for the cost for removing old and install-ing new or replacement parts. Goods returned without the sellers consent will be held at buyers risk and expense. Any goods returned upon a claim of breach of any warranty shall be returned with transportation costs prepaid by the buyer. If any goods proved to be other than as warranted, transportation costs for return of such goods from buyer’s plant will be borne by seller. The following are the spe-cific limits of warranty by product.
Seal-Less Type 47FR 18 GPM Water Circulating Pump
Motor & Pump with date code after 01-01-02; 4 1/2 years from date of shipment, or 4 years from installation.
64FR ECDC Air Conditioning Motors & 64FR 26 GPM Pump & Motor
41/2 years from date of shipment, or 4 years from installation.
All Other Brushless Motor, Blower & Pump Products
2 1/2 years from date of shipment, or 2 years from installation.
All Brush Motor, Blower & Pump Products
1 1/2 years from date of shipment, or 1 year from installation
0
2
4
6
8
10
12
14
16
18
20
22
24
26
28
30
32
34
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 180
1.0
2.0
3.0
4.0
5.0
6.0
7.0
8.0
9.0
10.0
0 5 10 15 20 25 30 35 40 45 50 55 60 65
0
2
4
6
8
10
12
14
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18
27.6 VDC 13.8 VDC12/24 VDC(actual 13.8/27.6 VDC)
Flow - U.S. Gallons Per Minute
To
tal H
ead
- F
eet
To
tal H
ead
- M
eter
s
Flow - Liters Per Minute
Cur
rent
- A
mp
s
Performance
FeaturesPump• Seal-less design is leak proof, pump
is magnetically coupled to motor
• Motor is removable from pump without draining system
• Environmentally resistant to hot-water spray, salt, fog, shock, and vibration
Motor• 12 VDC and 24 VDC models
available
• Variable speed version available
• Electronically Commutated DC (ECDCTM) motor design provides for maintenance free operation by eliminating brush motor failures and brush maintenance
• Rare-earth magnets provide high efficiency and low current draw
• “O” ring sealed for harsh operating environment
• Medium duty construction required for transit bus and construction equipment
DURA-TEK® 3.0 Inch Brushless DC Seal-less Pump40,000 Hour Design Life/12 Gallon
This document is for informational purposes only and should not be considered as a binding description of the products or their performance in all applications. The performance data on this page depicts typical performance under controlled laboratory conditions, data is corrected to 0.075 lb./ft3 air density (29.92” Hg @ 70O F). Actual performance will vary depending on the operating environment and application. AMETEK products are not designed for use with volatile, hazardous, or corrosive gases. Blower housings are not sealed, slight air/gas leakage will occur. AMETEK Rotron products are not designed for and should not be used in medical life support applications. AMETEK reserves the right to revise its products without notification. The above characteristics represent standard products. For product designed to meet specific applications contact AMETEK Marketing and Sales.
100 EAST ERIE STREET • KENT OH 44240 U.S.A. • TEL: 330-673-3452 • FAX: 330-677-3306
www.ametektip.com
© 2013 by AMETEK, Inc. All rights reserved .250413AGP (140112)
DURA-TEK® 3.0 Inch Brushless DC Seal-less Pump 40,000 Hour Design Life/12 Gallon
NOTES: * Motor design characteristics are based on an operating environment of 85OC.* Nominal and maximum performance figures are based on a winding temperature of 105OC.* This product is designed for medium duty harsh environment applications such as shuttle bus and other medium duty transit bus
applications. * This product is environmentally resistant to hot-water spray, rain, humidity, salt, fog, shock, and vibration associated with vehicle
applications.* The seal-less pump is leak proof and features a magnetic coupling with no wet seal to wear or replace.* The brushless motor is removable from the pump without draining the coolant system and has no brushes to be replaced. The motor is
electronically commutated.* Approximate typical weight: 8.0 lbs.
Dimensions
Model Voltage Voltage Flow Current Speed Ambient Range Temperature Range12 VDC Pump 13.8 VDC 9 - 18 VDC 12 gpm 12 amps 3300 RPM -40OC to 85OC (150042-X1)24 VDC Pump 27.6 VDC 18 - 32 VDC 12 gpm 6 amps 3300 RPM -40OC to 85OC (150011-X1)
Performance
FeaturesPump• Seal-less design is leak proof, pump is
magnetically coupled
• Motor is removable from pump without draining system
• Environmentally resistant to hot water spray, salt, fog, shock and vibration
• Cast bronze pump designed for heavy duty applications
Motor• 12 and 24 VDC models available
• Efficient brushless DC motor
• Electronically Commutated DC (ECDC) motor design provides for maintenance free operation.
• “O” ring sealed for harsh operating environment
• Designed for bus and On- and Off- Highway applications
15 GPM Seal-less Pump with Brushless Motor 40,000 Hour Design Life
Options• Variable speed control
• Pump outlet discharge orientation
• Baseplate versions
• Hose barb versions
0
1
2
3
4
5
0 10 20 30 40 50 60 70 80 90
0
5
10
15
20
25
0 5 10 15 20 25 30
Flow (LPM)
Flow (GPM)
Hea
d (F
eet)
Hea
d (M
eter
)
27.6 VDC
0
1
2
3
4
5
6
0 5 10 15 20 25 30
Curr
ent
(A)
0
50
100
150
200
0 5 10 15 20 25 30
Pow
er In
(Wat
ts)
This document is for informational purposes only and should not be considered as a binding description of the products or their performance in all applications. The performance data on this page depicts typical performance under controlled laboratory conditions, data is corrected to 0.075 lb./ft3 air density (29.92” Hg @ 70O F). Actual performance will vary depending on the operating environment and application. AMETEK products are not designed for use with volatile, hazardous, or corrosive gases. Blower housings are not sealed, slight air/gas leakage will occur. AMETEK Rotron products are not designed for and should not be used in medical life support applications. AMETEK reserves the right to revise its products without notification. The above characteristics represent standard products. For product designed to meet specific applications contact AMETEK Marketing and Sales.
100 EAST ERIE STREET • KENT OH 44240 U.S.A. • TEL: 330-673-3452 • FAX: 330-677-3306
www.ametektip.com
© 2013 by AMETEK, Inc. All rights reserved .250413AGP (140112)
15 GPM Seal-less Pump with Brushless Motor 40,000 Hour Design Life/15 Gallon
NOTES: * Motor design characteristics based on an operating environment of 85OC.* Nominal and maximum performance figures based on a winding temperature of 105OC* Approximate typical weight 10 lbs.
Dimensions
Model Voltage Voltage Range Flow CurrentAmbient
Temperature Range
151146-X1 13.5 VDC 9 - 18 VDC 15 gpm 8 amps -40OC to 85OC
150385-X2 27.6 VDC 18 - 32 VDC 15 gpm 4 amps -40OC to 85OC
0 5 10 15 20 25 30 35 40 45 50 55 60 65 70 75 80 85 90
0
2
4
6
8
10
12
14
16
18
20
22
24
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 250
1.0
2.0
3.0
4.0
5.0
6.0
7.0
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 250
2.0
4.0
6.0
8.0
10.0
12.0
14.0
27.6 VDC 13.8 VDC12/24 VDC(actual 13.8/27.6 VDC)
Flow - U.S. Gallons Per Minute
To
tal H
ead
- F
eet
To
tal H
ead
- M
eter
s
Flow - Liters Per Minute
Cur
rent
- A
mp
s
Performance
47 Frame Brushless Seal-less Pump60,000 Hour Design Life/18 Gallon
FeaturesPump• Seal-less design is leak proof, pump is
magnetically coupled to motor
• Motor is removable from pump without draining system
• Environmentally resistant to hot-water spray, salt, fog, shock, and vibration
• Cast bronze pump designed for heavy duty applications
Motor• 12 VDC and 24 VDC models available
• Electronically Commutated DC (ECDCTM) motor design provides for maintenance free operation by eliminating brush motor failures and brush maintenance
• Rare-earth magnets provide high efficiency and low current draw
• “O” ring sealed for harsh operating environment
• Reverse polarity and surge protected
• Heavy duty construction required for transit bus and construction equipment
• Available with or without baseplate and connectors
This document is for informational purposes only and should not be considered as a binding description of the products or their performance in all applications. The performance data on this page depicts typical performance under controlled laboratory conditions, data is corrected to 0.075 lb./ft3 air density (29.92” Hg @ 70O F). Actual performance will vary depending on the operating environment and application. AMETEK products are not designed for use with volatile, hazardous, or corrosive gases. Blower housings are not sealed, slight air/gas leakage will occur. AMETEK Rotron products are not designed for and should not be used in medical life support applications. AMETEK reserves the right to revise its products without notification. The above characteristics represent standard products. For product designed to meet specific applications contact AMETEK Marketing and Sales.
100 EAST ERIE STREET • KENT OH 44240 U.S.A. • TEL: 330-673-3452 • FAX: 330-677-3306
www.ametektip.com
© 2013 by AMETEK, Inc. All rights reserved .250413AGP (140112)
47 Frame Brushless Seal-less Pump60,000 Hour Design Life/18 Gallon
NOTES: * Motor design characteristics are based on an operating environment of 85OC.* Nominal and maximum performance figures are based on a winding temperature of 105OC.* This product is designed for heavy duty harsh environment applications such as heavy duty transit bus applications.* This product is environmentally resistant to hot-water spray, rain, humidity, salt, fog, shock, and vibration associated with vehicle
applications.* The seal-less pump is leak proof and features a magnetic coupling with no wet seal to wear or replace.* The brushless motor is removable from the pump without draining the coolant system and has no brushes to be replaced. The motor is
electronically commutated.* Approximate typical weight: 15.0 lbs.
Dimensions
Model Voltage Voltage Weight Flow Current Speed AmbientRange Temperature Range
12 VDC Pump 13.8 VDC 9 - 18 VDC 15 lbs. 18 gpm 10 amps 3100 RPM -40OC to 85OC (150299-X1)24 VDC Pump 27.6 VDC 18 - 32 VDC 15 lbs. 18 gpm 5 amps 3100 RPM -40OC to 85OC (150178-X1)
ROTRON SLP2418 Seal-less Pumpwith Brushless Motor40,000 Hour Design Life
Features Pump• Seal-less design for long life• Wet Rotor Design• Cast aluminum pump casing
Motor• 24 VDC motor versions available• Efficient brushless DC motor• Environmentally sealed (IP 67)
Wear Resistant Bearing Surfaces (Alumina and Tungsten Carbide)
•
Operation Features• 18-32 VDC Voltage Range• -40 to 95°C operating fluid temperature• -40 to 95°C storage temperature• Weight 6.7 lb• Over-temperature protection• Soft start• Current overload protection
Performance
• Under-voltage detection• Locked-rotor protection• Reverse polarity protection• Transient voltage protection• 5 year warranty• 40,000 hour design life for pump and motor
Options• CAN communication• Speed command input• Tach output• Pump outlet discharge orientation• Lead exit orientation• Logic-level On/Off function (Ignition/Enable)
You have a choice, Choose ROTRONTM
Dimensions
Model Voltage Voltage Range Flow CurrentAmbient
Temperature Range
151001-00 24 VDC 18 - 32 VDC 20 gpm @ 41 ft TDH 14.8 amps -40OC to 95OC
This document is for informational purposes only and should not be considered as a binding description of the products or their performance in all applications. The performance data on this page depicts typical performance under controlled laboratory conditions, data is corrected to 0.075 lb./ft3 air density (29.92” Hg @ 70O F). Actual performance will vary depending on the operating environment and application. AMETEK products are not designed for use with volatile, hazardous, or corrosive gases. Blower housings are not sealed, slight air/gas leakage will occur. AMETEK Rotron products are not designed for and should not be used in medical life support applications. AMETEK reserves the right to revise its products without notification. The above characteristics represent standard products. For product designed to meet specific applications contact AMETEK Marketing and Sales.
100 EAST ERIE STREET • KENT OH 44240 U.S.A. • TEL: 330-673-3452 • FAX: 330-677-3306
www.ametekdfs.com
© 2013 by AMETEK, Inc. All rights reserved .250413AGP (140112)
0 2 4 6 8 10 12 14 16 18 20 22 24 26 28 30 32 340
2
4
6
8
10
12
14
16
18
20
22
24
26
28
300 10 20 30 40 50 60 70 80 90 100 110 120 130
0.0
1.0
2.0
3.0
4.0
5.0
6.0
7.0
8.0
9.0
0
2.0
4.0
6.0
8.0
10.0
12.0
0 2 4 6 8 10 12 14 16 18 20 22 24 26 28 30 32 34
27.6 VDC24 VDC(actual 27.6 VDC)
Flow - U.S. Gallons Per Minute
To
tal H
ead
- F
eet
To
tal H
ead
- M
eter
s
Flow - Liters Per Minute
Cur
rent
- A
mp
s
Performance
64 Frame Brushless Seal-less Pump60,000 Hour Design Life/26 Gallon
FeaturesPump• Seal-less design is leak proof, pump is
magnetically coupled to motor
• Motor is removable from pump withoutdraining system
• Environmentally resistant to hot-waterspray, salt, fog, shock, and vibration
• Cast bronze pump designed for heavyduty applications
Motor• 24 VDC model only
• Electronically Commutated DC (ECDCTM)motor design provides for maintenance free operation by eliminating brush motor failures and brush maintenance
• Rare-earth magnets provide high efficiencyand low current draw
• “O” ring sealed for harsh operatingenvironment
• Reverse polarity and surge protected
• Heavy duty construction required for transitbus and construction equipment
This document is for informational purposes only and should not be considered as a binding description of the products or their performance in all applications. The performance data on this page depicts typical performance under controlled laboratory conditions, data is corrected to 0.075 lb./ft3 air density (29.92” Hg @ 70O F). Actual performance will vary depending on the operating environment and application. AMETEK products are not designed for use with volatile, hazardous, or corrosive gases. Blower housings are not sealed, slight air/gas leakage will occur. AMETEK Rotron products are not designed for and should not be used in medical life support applications. AMETEK reserves the right to revise its products without notification. The above characteristics represent standard products. For product designed to meet specific applications contact AMETEK Marketing and Sales.
100 EAST ERIE STREET • KENT OH 44240 U.S.A. • TEL: 330-673-3452 • FAX: 330-677-3306
www.ametektip.com
© 2013 by AMETEK, Inc. All rights reserved .250413AGP (140112)
64 Frame Brushless Seal-less Pump60,000 Hour Design Life/26 Gallon
NOTES: * Motor design characteristics are based on an operating environment of 85OC.* Nominal and maximum performance figures are based on a winding temperature of 105OC.* This product is designed for heavy duty harsh environment applications such as heavy duty transit bus applications. * This product is environmentally resistant to hot-water spray, rain, humidity, salt, fog, shock, and vibration associated with vehicle
applications.* The seal-less pump is leak proof and features a magnetic coupling with no wet seal to wear or replace.* The brushless motor is removable from the pump without draining the coolant system and has no brushes to be replaced. The motor is
electronically commutated.* Approximate typical weight: 25.0 lbs.
Dimensions
Model Voltage Voltage Weight Flow Current Speed Ambient Range Temperature Range24 VDC Pump 27.6 VDC 18 - 32 VDC 25 lbs. 26 gpm 10 amps 3850 RPM -40OC to 85OC (150393-X1)
FeaturesBrushless Motor—Electronically Commutated DC (ECDCTM) motor eliminates “brush” motor failures while offering extended life
Life Cycle Cost Savings—Brushless motor design life eliminates additional motor cost and labor intensive maintenance expense of brush motor designs
Interchangeable—Motor diameter and standard 2-wire electrical hook-up allows complete interchangeability with brush motor counterparts
Rugged—Environmentally resistant design offers protection from hot-water spray, rain, humidity, salt, fog, shock, and vibration
Drop-in replacement for these applications:• New Flyer Driver’s Booster Blower
• Neoplan Driver’s Booster Blower
Driver’s Booster Blower Motor1.7 Inch Brushless DC Motor
Performance
This document is for informational purposes only and should not be considered as a binding description of the products or their performance in all applications. The performance data on this page depicts typical performance under controlled laboratory conditions, data is corrected to 0.075 lb./ft3 air density (29.92” Hg @ 70O F). Actual performance will vary depending on the operating environment and application. AMETEK products are not designed for use with volatile, hazardous, or corrosive gases. Blower housings are not sealed, slight air/gas leakage will occur. AMETEK Rotron products are not designed for and should not be used in medical life support applications. AMETEK reserves the right to revise its products without notification. The above characteristics represent standard products. For product designed to meet specific applications contact AMETEK Marketing and Sales.
100 EAST ERIE STREET • KENT OH 44240 U.S.A. • TEL: 330-673-3452 • FAX: 330-677-3306
www.ametektip.com
© 2013 by AMETEK, Inc. All rights reserved .250413AGP (140112)
Dimensions
Driver’s Booster Blower Motor1.7 Inch Brushless DC Motor
Model Voltage Current Speed Ambient Weight Temperature Range1.7 Inch Brushless DC Motor, 24 Volt 27.6 VDC 0.41 A (nominal) 28 RPM (nominal) 40OC (maximum) 0.50 lb. (with a 3 oz.—in load)
Performance
Multi-Purpose UseApplications include:• A/C Evaporator and Condenser Motors
and Blowers
• Heater Motors and Blowers
• Defroster Motors and Blowers
• Coolant Pumps
• Radiator Cooling Fans
FeaturesBrushless Motor—Electronically Commu-tated DC (ECDCTM) motor eliminates “brush” motor failures while offering extended lifeLife Cycle Cost Savings—Motor design life of 40,000 hours eliminates additional motor cost and labor intensive maintenance expense of brush motor designsInterchangeable—3.0 inch outside motor diameter and standard 2-wire electrical hook-up allows complete inter-changeability with brush motor counterpartsRugged—Environmentally resistant design offers protection from hot-water spray, rain, humidity, salt, fog, shock, and vibration“Smart” Motor Controls—Advanced elec-tronic design offers enhanced features including:• Multi-speed Operation
• Current Limit
• Locked-rotor Protection
• Reverse Polarity Protection
• Over Temperature Shut-off
• Transient Over-voltage Protection
0
1000
2000
3000
4000
5000
6000
0 10 20 30 40 50 60 70 80 90 100 110 120 130 140 150
Torque (oz. in.)
Sp
eed
(RP
M)
0 10 20 30 40 50 60 70 80 90 100
Torque (Ncm)
0
100
200
300
400
0 10 20 30 40 50 60 70 80 90 100 110 120 130 140 150
Pow
er O
ut (W
atts
)
0
20
40
60
80
100
0 10 20 30 40 50 60 70 80 90 100 110 120 130 140 150
Eff
icie
ncy
(%)
0
5
10
15
20
0 10 20 30 40 50 60 70 80 90 100 110 120 130 140 150
Cur
rent
(A)
150209-00 150218-00150072-00
DURA-TEK® 3.0 Inch Brushless DC Motor40,000 Hour Design Life
This document is for informational purposes only and should not be considered as a binding description of the products or their performance in all applications. The performance data on this page depicts typical performance under controlled laboratory conditions, data is corrected to 0.075 lb./ft3 air density (29.92” Hg @ 70O F). Actual performance will vary depending on the operating environment and application. AMETEK products are not designed for use with volatile, hazardous, or corrosive gases. Blower housings are not sealed, slight air/gas leakage will occur. AMETEK Rotron products are not designed for and should not be used in medical life support applications. AMETEK reserves the right to revise its products without notification. The above characteristics represent standard products. For product designed to meet specific applications contact AMETEK Marketing and Sales.
100 EAST ERIE STREET • KENT OH 44240 U.S.A. • TEL: 330-673-3452 • FAX: 330-677-3306
www.ametektip.com
© 2013 by AMETEK, Inc. All rights reserved .250413AGP (140112)
DURA-TEK® 3.0 Inch Brushless DC Motor40,000 Hour Design Life
Dimensions
NOTES* Motor design characteristics are based on an operating environment of 25OC.
* Nominal and maximum performance figures are based on a winding temperature of 105OC.
* These part numbers are available through AMETEK distributors.
Motor Data Unit of MeasurePart Numbers
150072-00* 150209-00 150218-00
Voltage Input Volts DC 13.8 27.6 27.6Voltage Range Volts DC 11-16 18-32 18-32No Load Speed, Nominal RPM 3950 5475 3250No Load Current, Nominal Amps 1.3 1.0 0.7Stall Torque, Theoretical Oz.-In. 75 130 140
Ncm 53 92 99Continuous Torque Oz.-In. 45 90 55
Ncm 32 64 39Speed @ Torque, Nominal RPM 3425 4450 2750Current @ Torque, Nominal Amps 10.0 13.0 5.0Continuous Power, Max. Watts Out 170 300 113
Horsepower 0.23 0.40 0.15Torque Constant Oz. - In. / Amp 4.72 6.82 11.48
Ncm / Amp 3.34 4.81 8.11Voltage Constant V / k / RPM 3.49 5.04 8.49
V / rad / sec 0.0334 0.0481 0.0811Ambient Temperature, Max. Degrees C 85 85 70Motor Length, ( “L” above) Inches 5.065 4.335 4.175
mm 128,65 110,11 106,05Weight Oz 80 57 52
Grams 2300 1616 1474Shaft Length (“S” above) Inches 1.142 3.47 2
mm 29 88,14 50,8Shaft Configuration Single Dual SingleRotation Viewed Lead Exit End CCW CCW CWSpeeds 1 1 2
47 Frame Brushless DC Motor60,000 Hour Design LifeThe 47 Frame, Electronically Commutated DC (ECDCTM) motor series is a long-life brushless DC motor system for fans, blowers, pumps, and compressors up to .5 horsepower.
Features• ECDC motor design provides maintenance
free operation by eliminating brush motor failures and, brush and commutator maintenance
• Rare-earth magnets provide high torque/weight ratio
• Integral electronics provides simple 2 wire, DC operation (reverse polarity protected)
• Wide range of voltage inputs of 12, 24, 37, 74, 90, and 110 VDC
• 4H system for standard performance
• 3F system for high performance in a small package
Options• Custom shaft and mounting configurations
(foot and face)
• “O” ring sealed motor for harsh operating environments
• MS connectors
• Winding variations to meet exact speed/torque/voltage point
• Bi-directional operation
• Speeds up to 10,000 rpm
Performance
0
1000
2000
3000
4000
5000
0 10 20 30 40 50 60 70 80 90 100
0 10 20 30 40 50 60 70
0
50
100
150
200
0 10 20 30 40 50 60 70 80 90 100
0
20
40
60
80
100
0 10 20 30 40 50 60 70 80 90 100
0
5
10
15
20
25
0 10 20 30 40 50 60 70 80 90 100
150551-00150552-00071031000
Torque (oz. in.)
Sp
eed
(RP
M)
Torque (Ncm)
Pow
er O
ut (W
atts
)E
ffic
ienc
y (%
)C
urre
nt (A
)
This document is for informational purposes only and should not be considered as a binding description of the products or their performance in all applications. The performance data on this page depicts typical performance under controlled laboratory conditions, data is corrected to 0.075 lb./ft3 air density (29.92” Hg @ 70O F). Actual performance will vary depending on the operating environment and application. AMETEK products are not designed for use with volatile, hazardous, or corrosive gases. Blower housings are not sealed, slight air/gas leakage will occur. AMETEK Rotron products are not designed for and should not be used in medical life support applications. AMETEK reserves the right to revise its products without notification. The above characteristics represent standard products. For product designed to meet specific applications contact AMETEK Marketing and Sales.
100 EAST ERIE STREET • KENT OH 44240 U.S.A. • TEL: 330-673-3452 • FAX: 330-677-3306
www.ametektip.com
© 2013 by AMETEK, Inc. All rights reserved .250413AGP (140112)
Dimensions
47 Frame Brushless DC Motor60,000 Hour Design Life
NOTES* Motor design characteristics are based on an operating environment of 85OC.
* Nominal and maximum performance figures are based on a winding temperature of 105OC.
* This product is designed for heavy-duty harsh environment applications such as construction and transportation applications.
* This product is environmentally resistant to hot-water spray, rain, humidity, salt, fog, shock, and vibration associated with vehicle applications.
Motor Data Unit of MeasurePart Numbers
150551-00 150552-00 071031000
Voltage Input Volts DC 13.8 27.6 74Voltage Range Volts DC 9-16 18-32 50-80No Load Speed, Nominal RPM 4425 4350 3425No Load Current, Nominal Amps 2.5 1.4 0.3Stall Torque, Theoretical Oz.-In. 160 210 334
Ncm 113 148 236Continuous Torque Oz.-In. 30 30 50
Ncm 21 21 35Speed @ Torque, Nominal RPM 3575 3675 2900Current @ Torque, Nominal Amps 9.5 4.5 2.0Continuous Power, Max. Watts Out 80 82 108
Horsepower 0.11 0.11 0.14Torque Constant Oz. - in. / Amp 4.41 8.58 29.21
Ncm / Amp 3.11 6.06 19.1Voltage Constant V / k RPM 3.12 6.34 21.61
V / rad / sec 0.0298 0.0606 0.2063Ambient Temperature, Max. Degrees C 85 85 55Motor Length, ( “L” above) Inches 6.00 6.00 6.68
mm 152,40 152,40 169,67Weight Lbs. 7.3 7.3 8
kg 3.3 3.3 3.6Shaft Length (“S” above) Inches 1 1 1.65
mm 25,4 25,4 41,91Shaft Diameter (“D” above) Inches 0.375 0.375 0.312
mm 9,52 9,52 7,925Shaft Configuration Single Single SingleRotation Viewed Lead Exit End CW CW CCWSpeeds 1 1 1
Performance
64 Frame Brushless DC Motor60,000 Hour Design LifeThe 64 Frame, Electronically Commutated DC (ECDCTM) motor series is a long-life, brushless DC motor system for fans, blowers, pumps, and compressors up to 1.25 horsepower.
Features• ECDC motor design provides maintenance
free operation by eliminating brush motor failures and, brush and commutator maintenance
• Rare-earth magnets provide high torque/weight ratio
• Wide range of voltage inputs of 12, 24, 37, 74, 90, and 110 VDC
• “O” ring sealed for harsh operating environments
• Reverse polarity and voltage surge protected
Options• Custom shaft and mounting configurations
(foot and face)
• Winding variations to meet exact speed/torque/voltage point
• Drop-in replacement motor design for existing brush motors
• Available for OEM and retrofit applications
• Complete blowers, fans, and pumps available
Torque (oz. in.)
Sp
eed
(RP
M)
Torque (Ncm)
0
500
1000
1500
2000
2500
3000
3500
4000
4500
0 100 200 300 400 500 600 700 800 900 1000
0 100 200 300 400 500 600 700
0
10
20
30
40
0 100 200 300 400 500 600 700 800 900 1000
0
200
400
600
800
1000
0 100 200 300 400 500 600 700 800 900 1000
0
20
40
60
80
100
0 100 200 300 400 500 600 700 800 900 1000
Pow
er O
ut (W
atts
)E
ffic
ienc
y (%
)C
urre
nt (A
)
150203-00071139000150101-00071081000
This document is for informational purposes only and should not be considered as a binding description of the products or their performance in all applications. The performance data on this page depicts typical performance under controlled laboratory conditions, data is corrected to 0.075 lb./ft3 air density (29.92” Hg @ 70O F). Actual performance will vary depending on the operating environment and application. AMETEK products are not designed for use with volatile, hazardous, or corrosive gases. Blower housings are not sealed, slight air/gas leakage will occur. AMETEK Rotron products are not designed for and should not be used in medical life support applications. AMETEK reserves the right to revise its products without notification. The above characteristics represent standard products. For product designed to meet specific applications contact AMETEK Marketing and Sales.
100 EAST ERIE STREET • KENT OH 44240 U.S.A. • TEL: 330-673-3452 • FAX: 330-677-3306
www.ametektip.com
© 2013 by AMETEK, Inc. All rights reserved .250413AGP (140112)
64 Frame Brushless DC Motor60,000 Hour Design Life
NOTES:* Motor design characteristics are based on an operating environment of 85OC.* Nominal and maximum performance figures are based on a winding temperature of 105OC.* This product is designed for heavy-duty harsh environment applications such as construction and transportation applications. * This product is environmentally resistant to hot-water spray, rain, humidity, salt, fog, shock, and vibration associated with vehicle
applications.
* 25OC ambient mounted on 12 in. x 12 in. x 1/2 in. aluminum sink.
Dimensions
Motor Data Unit of MeasurePart Numbers
150203-00 071139000 150101-00 071081000
Voltage Input Volts DC 27.6 27.6 36.0 74.0Voltage Range Volts DC 18-32 18-32 24-40 50-80No Load Speed, Nominal RPM 3900 2050 1220 1525No Load Current, Nominal Amps 1.7 2.5 1.3 0.5Stall Torque, Theoretical Oz.-In. 150 625 700 900
Ncm 106 441 494 636Continuous Torque Oz.-In. 75 400 500 800
Ncm 53 282 353 565Speed @ Torque, Nominal RPM 3600 1825 1050 1250Current @ Torque, Nominal Amps 9.0 23.5 13.2 12Continuous Power, Max. Watts Out 200 542 400 765
Horsepower 0.27 0.73 0.54 1.00Torque Constant Oz. - in. / Amp 9.57 18.20 39.90 65.61
Ncm / Amp 6.76 12.86 28.18 46.33Voltage Constant V / k RPM 7.08 13.46 29.51 48.52
V / rad / sec 0.0676 0.1286 0.2818 0.4634Ambient Temperature, Max. Degrees C 72 70 70 85Motor Length, ( “L” above) Inches 7.08 10.36 10.125 13.34
mm 179,83 263,14 257,18 338,83Weight Lbs. 18 23 26 29
kg 8.16 10.43 11.79 13.15Shaft Length (“S” above) Inches 1 2.5 1.68 2.16
mm 25,4 63,5 42,67 54,86Shaft Diameter (“D” above) Inches 0.375 0.625 0.5 0.7497
mm 9,53 15,88 12.7 19,04Shaft Configuration Single Single Single SingleRotation Viewed Lead Exit End CW CW CCW CCWSpeeds 1 2 1 1
ROTATION
4X 8-32UNC-2B x MAX DEEP
EQUALLY SPACED AS SHOWN
ON A BOLT CIRCLE
Ø.3747+.0000-.0010
Ø2.145+.000-.002
135° APART
4.56±.06[115.82±1.52]OVER FLATS
4X
.47[11.94]
3.68[93.47]
2.750[69.85]
5.68[144.27]
4.250[107.95]
4X
.71[18.03]
1.40[35.56]
6.76[171.70]
( )
2X
OVER FLAT
1.00[25.4]
.100[2.54]
Ø5.25[Ø133.35]
45°
.25[6.35]
1.060±.015[26.92±0.38]
[9.01±0.38].355±.015
1.40[35.56]
( ).32[8.13]
.18[4.57]
3.00[76.20]
.38[9.65]
[Ø72.24]Ø2.844
[Ø54.48 ]-0.05+0.00
[Ø9.517 ]+0.000-0.025
.345[8.76]
.80[20.32]2X
MIN FLAT
-0.0+2.018.0
BA
CURRAGATED LOOM
[457.20 ]+50.8-0.0
2X 12 AWG XLPE LEADSWEATHER PACK2 WAY CONNECTORPACKARD PN 120109732X MALE TERMINALPACKARD PN 121245873X CABLE SEALPACKARD PN 12015193 PIN A : + 27.6VDC PIN B : - RETURN
Ametek’s 64 frame brushless DC motors are designed for 60,000 hour operating life and have been built to meet the original OEM specifications for new and existing coach field replacement applications. All Coach AC motors include a 4.5 year warranty. These motors are designed to directly replace OEM brush motors.
Features and Benefits• 27.6 VDC Brushless DC Microprocessor
Controlled Design
• Field proven and Qualified in most major OEM applications
• Drop-in replacement for most existing brush motor applications, up to 2.2 HP
• Environmentally Sealed design with O-rings and shaft seals for harsh Environments
• Electronically protected design includes:
- Current limiting soft start
- Reverse polarity protection
- Locked rotor (stall) protection
- Over temperature protection
• 4.5 year Warranty
• Custom Shaft and mounting Configurations available
• Custom Motor performance design variations available to meet existing or new design applications.
• Complete Field replacement/upgrade kits are available from coach manufacturers.
64 Frame Condenser Motors for Coach A/C Systems60,000 Hour Brushless DC Motors for OEM and Field Upgrade Applications
This document is for informational purposes only and should not be considered as a binding description of the products or their performance in all applications. The performance data on this page depicts typical performance under controlled laboratory conditions, data is corrected to 0.075 lb./ft3 air density (29.92” Hg @ 70O F). Actual performance will vary depending on the operating environment and application. AMETEK products are not designed for use with volatile, hazardous, or corrosive gases. Blower housings are not sealed, slight air/gas leakage will occur. AMETEK Rotron products are not designed for and should not be used in medical life support applications. AMETEK reserves the right to revise its products without notification. The above characteristics represent standard products. For product designed to meet specific applications contact AMETEK Marketing and Sales.
100 EAST ERIE STREET • KENT OH 44240 U.S.A. • TEL: 330-673-3452 • FAX: 330-677-3306
www.ametektip.com
© 2013 by AMETEK, Inc. All rights reserved .250413AGP (140112)
64 Frame Condenser Motors for Coach A/C Systems60,000 Hour Brushless DC Motors for OEM and Field Upgrade Applications
NOTES:* Motor design characteristics are based on an operating environment of 65OC.* Nominal and maximum performance figures are based on a winding temperature of 105OC.* This product is designed for heavy-duty harsh environment applications such as construction and transportation applications. * This product is environmentally resistant to hot-water spray, rain, humidity, salt, fog, shock, and vibration associated with vehicle
applications.
Dimensions
Motor Data Unit of MeasurePart Numbers
150214-00
Voltage Input Volts DC 27.6Voltage Range Volts DC 18-32Speed(s) # 2Torque In.-Lbs. 18/7.5Speed RPM 2000/1235Rotation CCW/CW. CCW (SE)
Current Amps 20/6Weight Lbs./Kg 18.6/8.4Ambient Temperature C -40 to -65
-
+
IN.(MM)
64 Frame Evaporator Motors for Coach A/C Systems60,000 Hour Brushless DC Motors for OEMand Field Upgrade Applications
- Reverse polarity protection
- Locked rotor (stall) protection
- Over temperature protection
- 4.5 Year Warranty
• Custom Shaft and mounting Configurations available
• Custom Motor performance design variations available to meet existing or new design applications.
• Complete Field replacement/upgrade kits are available from Coach manufacturers.
Ametek’s 64 frame brushless DC motors are designed for 60,000 hour operating life and have been built to meet the original OEM specifications for new and existing coach field replacement applications. All Coach AC motors include a 4.5 year warranty. These motors are designed to directly replace OEM brush motors.”.
Features• 27.6 VDC Brushless DC Microprocessor
Controlled Design
• Field proven and Qualified in OEM applications
• Drop-in replacement for most existing brush motor applications, up to 2.2 HP
• Environmentally Sealed design with O-rings and shaft seals for harsh Environments
• Electronically protected design includes:
- Current limiting soft start
This document is for informational purposes only and should not be considered as a binding description of the products or their performance in all applications. The performance data on this page depicts typical performance under controlled laboratory conditions, data is corrected to 0.075 lb./ft3 air density (29.92” Hg @ 70O F). Actual performance will vary depending on the operating environment and application. AMETEK products are not designed for use with volatile, hazardous, or corrosive gases. Blower housings are not sealed, slight air/gas leakage will occur. AMETEK Rotron products are not designed for and should not be used in medical life support applications. AMETEK reserves the right to revise its products without notification. The above characteristics represent standard products. For product designed to meet specific applications contact AMETEK Marketing and Sales.
100 EAST ERIE STREET • KENT OH 44240 U.S.A. • TEL: 330-673-3452 • FAX: 330-677-3306
www.ametektip.com
© 2013 by AMETEK, Inc. All rights reserved .250413AGP (140112)
64 Frame Evaporator Motors for Coach A/C Systems60,000 Hour Brushless DC Motors for OEMand Field Upgrade Applications
NOTES:* Motor design characteristics are based on an operating environment of 65OC.* Nominal and maximum performance figures are based on a winding temperature of 105OC.* This product is designed for heavy-duty harsh environment applications such as construction and transportation applications. * This product is environmentally resistant to hot-water spray, rain, humidity, salt, fog, shock, and vibration associated with vehicle
applications.
Dimensions
Motor Data Unit of MeasurePart Numbers
150215-00
Voltage Input Volts DC 27.6Voltage Range Volts DC 18-32Speed(s) # 2Torque In.-Lbs. 54/36Speed RPM 1700/1400Rotation CCW/CW. CW (Electronics End))
Current Amps 52/26.5Weight Lbs./Kg 29.6/13.5Ambient Temperature C -40 to -65
IN.(MM)
64 Frame Evaporator Motors for Coach A/C Systems60,000 Hour Brushless DC Motors for OEMand Field Upgrade Applications
- Reverse polarity protection
- Locked rotor (stall) protection
- Over temperature protection
- 4.5 Year Warranty
• Custom Shaft and mounting Configurations available
• Custom Motor performance design variations available to meet existing or new design applications.
• Complete Field replacement/upgrade kits are available from Coach manufacturers.
Ametek’s 64 frame brushless DC motors are designed for 60,000 hour operating life and have been built to meet the original OEM specifications for new and existing coach field replacement applications. All Coach AC motors include a 4.5 year warranty. These motors are designed to directly replace OEM brush motors.”.
Features• 27.6 VDC Brushless DC Microprocessor
Controlled Design
• Field proven and Qualified in OEM applications
• Drop-in replacement for most existing brush motor applications, up to 2.2 HP
• Environmentally Sealed design with O-rings and shaft seals for harsh Environments
• Electronically protected design includes:
- Current limiting soft start
This document is for informational purposes only and should not be considered as a binding description of the products or their performance in all applications. The performance data on this page depicts typical performance under controlled laboratory conditions, data is corrected to 0.075 lb./ft3 air density (29.92” Hg @ 70O F). Actual performance will vary depending on the operating environment and application. AMETEK products are not designed for use with volatile, hazardous, or corrosive gases. Blower housings are not sealed, slight air/gas leakage will occur. AMETEK Rotron products are not designed for and should not be used in medical life support applications. AMETEK reserves the right to revise its products without notification. The above characteristics represent standard products. For product designed to meet specific applications contact AMETEK Marketing and Sales.
100 EAST ERIE STREET • KENT OH 44240 U.S.A. • TEL: 330-673-3452 • FAX: 330-677-3306
www.ametektip.com
© 2013 by AMETEK, Inc. All rights reserved .250413AGP (140112)
64 Frame Evaporator Motors for Coach A/C Systems60,000 Hour Brushless DC Motors for OEMand Field Upgrade Applications
NOTES:* Motor design characteristics are based on an operating environment of 65OC.* Nominal and maximum performance figures are based on a winding temperature of 105OC.* This product is designed for heavy-duty harsh environment applications such as construction and transportation applications. * This product is environmentally resistant to hot-water spray, rain, humidity, salt, fog, shock, and vibration associated with vehicle
applications.
Dimensions
Motor Data Unit of MeasurePart Numbers
150355-00
Voltage Input Volts DC 27.6Voltage Range Volts DC 18-32Speed(s) # 2Torque In.-Lbs. 32/21Speed RPM 2800/2340Rotation CCW/CW. CW (Electronics End))
Current Amps 45/25Weight Lbs./Kg 28.8/13.1Ambient Temperature C -40 to -65
IN.(MM)
64 Frame Condenser Motors for Coach A/C Systems60,000 Hour Brushless DC Motors for OEMand Field Upgrade Applications
Ametek’s 64 frame brushless DC motors are designed for 60,000 hour operating life and have been built to meet the original OEM specifications for new and existing coach field replacement applications. All Coach AC motors include a 4.5 year warranty. These motors are designed to directly replace OEM brush motors.
Features• 27.6 VDC Brushless DC Microprocessor
Controlled Design
• Field proven and Qualified in most major OEM applications
• Drop-in replacement for most existing brush motor applications, up to 2.2 HP
• Environmentally Sealed design with O-rings and shaft seals for harsh Environments
• Electronically protected design includes:
- Current limiting soft start
- Reverse polarity protection
- Locked rotor (stall) protection
- Over temperature protection
• 4.5 year Warranty
• Custom Shaft and mounting Configurations available
• Custom Motor performance design variations available to meet existing or new design applications.
• Complete Field replacement/upgrade kits are available from coach manufacturers.
This document is for informational purposes only and should not be considered as a binding description of the products or their performance in all applications. The performance data on this page depicts typical performance under controlled laboratory conditions, data is corrected to 0.075 lb./ft3 air density (29.92” Hg @ 70O F). Actual performance will vary depending on the operating environment and application. AMETEK products are not designed for use with volatile, hazardous, or corrosive gases. Blower housings are not sealed, slight air/gas leakage will occur. AMETEK Rotron products are not designed for and should not be used in medical life support applications. AMETEK reserves the right to revise its products without notification. The above characteristics represent standard products. For product designed to meet specific applications contact AMETEK Marketing and Sales.
100 EAST ERIE STREET • KENT OH 44240 U.S.A. • TEL: 330-673-3452 • FAX: 330-677-3306
www.ametektip.com
© 2013 by AMETEK, Inc. All rights reserved .250413AGP (140112)
64 Frame Condenser Motors for Coach A/C Systems60,000 Hour Brushless DC Motors for OEM and Field Upgrade Applications
NOTES:* Motor design characteristics are based on an operating environment of 65OC.* Nominal and maximum performance figures are based on a winding temperature of 105OC.* This product is designed for heavy-duty harsh environment applications such as construction and transportation applications. * This product is environmentally resistant to hot-water spray, rain, humidity, salt, fog, shock, and vibration associated with vehicle
applications.
Dimensions
Motor Data Unit of MeasurePart Numbers
151140-00
Voltage Input Volts DC 27.6Voltage Range Volts DC 18-32Speed(s) # 2Torque In.-Lbs. 24/16Speed RPM 2340/1160Rotation CCW/CW. CCW (SE)
Current Amps 30/5Weight Lbs./Kg 21.8/9.9Ambient Temperature C -40 to -65
IN.(MM)
Performance
RTP10 Brushless DC Fan40,000 Hour Design Life
FeaturesFans• Lightweight molded plastic construction
• 12 VDC and 24 VDC models available
Brushless Motor• Electronically Commutated DC (ECDC™)
motor design provides for maintenance free operation by eliminating brush motor failures and brush maintenance
• Medium and heavy duty construction as required for transit bus and construction equipment
• Multiple speeds or variable speed available without the use of dropping resistors
Multi-Purpose Use Applications include:• A/C Condenser Fans
• Radiator Cooling Fans
• Exhaust Fans
0
0.25
0.50
0.75
1.00
1.25
1.50
0 100 200 300 400 500 600 700 800 900 1000 1100
100
200
300
0 200 400 600 800 1000 1200 1400 1600 1800
0
4.0
6.0
8.0
10.0
12.0
14.0
0 100 200 300 400 500 600 700 800 900 1000 1100
2800
3000
3200
3400
0 100 200 300 400 500 600 700 800 900 1000 1100
27.6 VDC 13.8 VDC12/24 VDC(actual 13.8/27.6 VDC)
Sp
eed
- R
PM
Cur
rent
- A
mp
s
Air Flow - Feet3 /Minute at 0.075 Lbs/Ft3
Sta
tic P
ress
ure
- P
asca
ls
Air Flow - Meters3/Hour at 1.202 Kg/M3
Sta
tic P
ress
ure
-Inc
hes
of
Wat
er
This document is for informational purposes only and should not be considered as a binding description of the products or their performance in all applications. The performance data on this page depicts typical performance under controlled laboratory conditions, data is corrected to 0.075 lb./ft3 air density (29.92” Hg @ 70O F). Actual performance will vary depending on the operating environment and application. AMETEK products are not designed for use with volatile, hazardous, or corrosive gases. Blower housings are not sealed, slight air/gas leakage will occur. AMETEK Rotron products are not designed for and should not be used in medical life support applications. AMETEK reserves the right to revise its products without notification. The above characteristics represent standard products. For product designed to meet specific applications contact AMETEK Marketing and Sales.
100 EAST ERIE STREET • KENT OH 44240 U.S.A. • TEL: 330-673-3452 • FAX: 330-677-3306
www.ametektip.com
© 2013 by AMETEK, Inc. All rights reserved .250413AGP (140112)
NOTES: * These fans can be equipped with an option allowing for up to 4 distinct speed settings. Please inquire with the Marketing/Sales
Department for specific set points.* Temperature: Working Ambient Air: -40OC to 70OC, Storage Air: -40OC to 85OC.* Environmentally resistant design. Please discuss specific operating environment with the Marketing/Sales Department.* Approximate Typical Weight: 6.0 lbs.
Blower Data Unit of Part Number Measure 150077-01 150113-01
Voltage Input VDC 12 (actual 13.8) 24 (actual 27.6)
Flow Rate, Max. (Open Flow) CFM 698 698
m3/hr 1185 1185
Typical Performance PointsAir Flow Pressure0 CFM in. H2O 0.70 0.70
100 CFM in. H2O 0.60 0.60
200 CFM in. H2O 0.50 0.50
300 CFM in. H2O 0.38 0.38
400 CFM in. H2O 0.29 0.29
500 CFM in. H2O 0.20 0.20
600 CFM in. H2O 0.10 0.10
698 CFM in. H2O 0.00 0.00
Dimensions
RTP10 Brushless DC Fan40,000 Hour Design Life
XLPE, 300V, 125˚C2X 14 GA. (RED: +, BLACK: -)
3X
1X 16 GA. (YEL: 0 TO +10.0VDC)24.00±1.00[609.6±25.4]
3X
[9.65±3.05].38±.12
AIR FLOW
PULLER
Ø3.00±.01[Ø76.20±0.25]
.86[21.84]
2.88[73.15]
4.85[123.19]
10.72[272.29]
5.14[130.56]
Ø11.28[Ø286.51]
.36[9.14]4X 2X
4X THRU
SPACED AS SHOWN(Ø6.35]
Ø.25
11.87[301.50]
INCH(MILLIMETER)
RTP14 Brushless DC Fan40,000 Hour Design Life
FeaturesFans• Lightweight molded plastic construction
• 24 VDC models available
Brushless Motor• Electronically Commutated DC (ECDC™)
motor design provides for maintenance free operation by eliminating brush motor failures and brush maintenance
• Medium and heavy duty construction as required for transit bus and construction equipment
• Multiple speeds or variable speed available without the use of dropping resistors
Multi-Purpose Use Applications include:• A/C Condenser Fans
• Radiator Cooling Fans
• Exhaust Fans
Performance
0 100 200 300 400 500 600 700 800 900 1000 1100 1200 1300 1400 1500 1600 1700 18000
0.25
0.50
0.75
1.00
1.250 200 400 600 800 1000 1200 1400 1600 1800 2000 2200 2400 2600 2800 3000
0
50
100
150
200
250
300
6.0
8.0
10.0
12.0
0 100 200 300 400 500 600 700 800 900 1000 1100 1200 1300 1400 1500 1600 1700 1800
2700
2900
3100
0 100 200 300 400 500 600 700 800 900 1000 1100 1200 1300 1400 1500 1600 1700 1800
27.6 VDC24 VDC(actual 27.6 VDC)
Sp
eed
- R
PM
Cur
rent
- A
mp
s
Air Flow - Feet3 /Minute at 0.075 Lbs/Ft3
Sta
tic P
ress
ure
- P
asca
ls
Air Flow - Meters3/Hour at 1.202 Kg/M3
Sta
tic P
ress
ure
-Inc
hes
of
Wat
er
This document is for informational purposes only and should not be considered as a binding description of the products or their performance in all applications. The performance data on this page depicts typical performance under controlled laboratory conditions, data is corrected to 0.075 lb./ft3 air density (29.92” Hg @ 70O F). Actual performance will vary depending on the operating environment and application. AMETEK products are not designed for use with volatile, hazardous, or corrosive gases. Blower housings are not sealed, slight air/gas leakage will occur. AMETEK Rotron products are not designed for and should not be used in medical life support applications. AMETEK reserves the right to revise its products without notification. The above characteristics represent standard products. For product designed to meet specific applications contact AMETEK Marketing and Sales.
100 EAST ERIE STREET • KENT OH 44240 U.S.A. • TEL: 330-673-3452 • FAX: 330-677-3306
www.ametektip.com
© 2013 by AMETEK, Inc. All rights reserved .250413AGP (140112)
Dimensions
RTP14 Brushless DC Fan40,000 Hour Design Life
NOTES: * These fans can be equipped with an option allowing for up to 4 distinct speed settings. Please inquire with the Marketing/Sales
Department for specific set points.* Temperature: Working Ambient Air: -40OC to 70OC, Storage Air: -40OC to 85OC.* Environmentally resistant design. Please discuss specific operating environment with the Marketing/Sales Department.* Approximate Typical Weight: 7.0 lbs.
AIR FLOW
PULLER
3.65[92.71]
5.85[148.59]
Ø3.00±.01[Ø76.20±0.25]
.86[21.84]
4X.36
[9.14]
13.97[354.84]
7.08[179.83]
14.68[372.87]
Ø14.68[Ø372.87]
2X
Ø.25
SPACED AS SHOWN
4X THRU
.38±.12[9.65±3.05]
[609.6±25.4]
3X
24.00±1.00
2X 14 GA. (RED: +, BLACK: -)XLPE, 300V, 125˚C
1X 16 GA. (YEL: 0 TO +10.0VDC)
3X
2X(Ø6.35]
Blower Data Unit of Part Number Measure 150078-01
Voltage Input VDC 24 (actual 27.6)
Flow Rate, Max. (Open Flow) CFM 1641
m3/hr 2788
Typical Performance PointsAir Flow Pressure0 CFM in. H2O 1.36
200 CFM in. H2O 1.20
400 CFM in. H2O 1.07
600 CFM in. H2O 0.99
800 CFM in. H2O 0.80
1000 CFM in. H2O 0.59
1200 CFM in. H2O 0.45
1400 CFM in. H2O 0.23
1600 CFM in. H2O 0.04
1641 CFM in. H2O 0.00
INCH(MILLIMETER)
RTP16 Brushless DC Fan 40,000 Hour Design Life
FeaturesFans• Lightweight molded plastic construction
• 12 VDC and 24 VDC models available
Brushless Motor• Electronically Commutated DC (ECDC™)
motor design provides for maintenance free operation by eliminating brush motor failures and brush maintenance
• Medium and heavy duty construction as required for transit bus and construction equipment
• Multiple speeds or variable speed available without the use of dropping resistors
Multi-Purpose Use Applications include:• A/C Condenser Fans
• Radiator Cooling Fans
• Exhaust Fans
Performance
0.00
0.20
0.40
0.60
0.80
1.00
0 100 200 300 400 500 600 700 800 900 1000 1100 1200 1300 1400 1500 1600 1700 1800 1900 20000
20
40
60
80
100
120
140
160
180
200
220
240
0 200 400 600 800 1000 1200 1400 1600 1800 2000 2200 2400 2600 2800 3000 3200
4.0
6.0
8.0
10.0
12.0
14.0
16.0
0 100 200 300 400 500 600 700 800 900 1000 1100 1200 1300 1400 1500 1600 1700 1800 1900 2000
2000
2100
2200
2300
2400
0 100 200 300 400 500 600 700 800 900 1000 1100 1200 1300 1400 1500 1600 1700 1800 1900 2000
27.6 VDC 13.8 VDC12/24 VDC(actual 13.8/27.6 VDC)
Sp
eed
- R
PM
Cur
rent
- A
mp
s
Air Flow - Feet3 /Minute at 0.075 Lbs/Ft3
Sta
tic P
ress
ure
- P
asca
ls
Air Flow - Meters3 /Hour at 1.202 Kg/M3
Sta
tic P
ress
ure
-Inc
hes
of
Wat
er
This document is for informational purposes only and should not be considered as a binding description of the products or their performance in all applications. The performance data on this page depicts typical performance under controlled laboratory conditions, data is corrected to 0.075 lb./ft3 air density (29.92” Hg @ 70O F). Actual performance will vary depending on the operating environment and application. AMETEK products are not designed for use with volatile, hazardous, or corrosive gases. Blower housings are not sealed, slight air/gas leakage will occur. AMETEK Rotron products are not designed for and should not be used in medical life support applications. AMETEK reserves the right to revise its products without notification. The above characteristics represent standard products. For product designed to meet specific applications contact AMETEK Marketing and Sales.
100 EAST ERIE STREET • KENT OH 44240 U.S.A. • TEL: 330-673-3452 • FAX: 330-677-3306
www.ametektip.com
© 2013 by AMETEK, Inc. All rights reserved .250413AGP (140112)
Dimensions
RTP16 Brushless DC Fan 40,000 Hour Design Life
NOTES: * These fans can be equipped with an option allowing for up to 4 distinct speed settings. Please inquire with the Marketing/Sales
Department for specific set points.* Temperature: Working Ambient Air: -40OC to 70OC, Storage Air: -40OC to 85OC.* Environmentally resistant design. Please discuss specific operating environment with the Marketing/Sales Department.* Approximate Typical Weight: 7.0 lbs.
Blower Data Unit of Part Number Measure 150079-01 150115-01
Voltage Input VDC 12 (actual 13.8) 24 (actual 27.6)
Flow Rate, Max. (Open Flow) CFM 1862 1862
m3/hr 3164 3164
Typical Performance PointsAir Flow Pressure0 CFM in. H2O 0.95 0.95
200 CFM in. H2O 0.83 1.28
400 CFM in. H2O 0.72 1.14
600 CFM in. H2O 0.65 1.05
800 CFM in. H2O 0.57 0.89
1000 CFM in. H2O 0.50 0.66
1200 CFM in. H2O 0.41 0.40
1400 CFM in. H2O 0.32 0.14
1600 CFM in. H2O 0.19 0.19
1800 CFM in. H2O 0.05 0.05
1862 CFM in. H2O 0.00 0.00
INCH(MILLIMETER)
RTP16S Brushless DC Fan 40,000 Hour Design Life
FeaturesFans• Lightweight molded plastic construction
• 12 VDC and 24 VDC models available
Brushless Motor• Electronically Commutated DC (ECDC™)
motor design provides for maintenance free operation by eliminating brush motor failures and brush maintenance
• Medium and heavy duty construction as required for transit bus and construction equipment
• Multiple speeds or variable speed available without the use of dropping resistors
Multi-Purpose Use Applications include:• A/C Condenser Fans
• Radiator Cooling Fans
• Exhaust Fans
Performance
0.00
0.20
0.40
0.60
0.80
1.00
0 100 200 300 400 500 600 700 800 900 1000 1100 1200 1300 1400 1500 1600 1700 1800 1900 20000
20
40
60
80
100
120
140
160
180
200
220
240
0 200 400 600 800 1000 1200 1400 1600 1800 2000 2200 2400 2600 2800 3000 3200
4.0
6.0
8.0
10.0
12.0
14.0
16.0
0 100 200 300 400 500 600 700 800 900 1000 1100 1200 1300 1400 1500 1600 1700 1800 1900 2000
2000
2100
2200
2300
2400
0 100 200 300 400 500 600 700 800 900 1000 1100 1200 1300 1400 1500 1600 1700 1800 1900 2000
27.6 VDC 13.8 VDC12/24 VDC(actual 13.8/27.6 VDC)
Sp
eed
- R
PM
Cur
rent
- A
mp
s
Air Flow - Feet3 /Minute at 0.075 Lbs/Ft3
Sta
tic P
ress
ure
- P
asca
ls
Air Flow - Meters3/Hour at 1.202 Kg/M3
Sta
tic P
ress
ure
-Inc
hes
of
Wat
er
This document is for informational purposes only and should not be considered as a binding description of the products or their performance in all applications. The performance data on this page depicts typical performance under controlled laboratory conditions, data is corrected to 0.075 lb./ft3 air density (29.92” Hg @ 70O F). Actual performance will vary depending on the operating environment and application. AMETEK products are not designed for use with volatile, hazardous, or corrosive gases. Blower housings are not sealed, slight air/gas leakage will occur. AMETEK Rotron products are not designed for and should not be used in medical life support applications. AMETEK reserves the right to revise its products without notification. The above characteristics represent standard products. For product designed to meet specific applications contact AMETEK Marketing and Sales.
100 EAST ERIE STREET • KENT OH 44240 U.S.A. • TEL: 330-673-3452 • FAX: 330-677-3306
www.ametektip.com
© 2013 by AMETEK, Inc. All rights reserved .250413AGP (140112)
Ø3.00±.01[Ø76.20±0.25]
.86[21.84]
AIR FLOW
PULLER
3.58[90.93]
6.54[166.12]
[609.6±25.4]
.38±.123X
2X 14 GA. (RED: +, BLACK: -)1X 16 GA. (YEL: 0 TO +10.0VDC)
XLPE, 300V, 125˚C
3X
15.66[397.76]
16.66[423.16]
12.84[326.14]
12.84[326.14]
4X THRU
SPACED AS SHOWN
Ø.25(Ø6.35]
[9.65±3.05]
24.00±1.00
Dimensions
RTP16S Brushless DC Fan 40,000 Hour Design Life
NOTES: * These fans can be equipped with an option allowing for up to 4 distinct speed settings. Please inquire with the Marketing/Sales
Department for specific set points.* Temperature: Working Ambient Air: -40OC to 70OC, Storage Air: -40OC to 85OC.* Environmentally resistant design. Please discuss specific operating environment with the Marketing/Sales Department.* Approximate Typical Weight: 7.0 lbs.
Blower Data Unit of Part Number Measure 150083-01 150116-01
Voltage Input VDC 12 (actual 13.8) 24 (actual 27.6)
Flow Rate, Max. (Open Flow) CFM 1947 1947
m3/hr 3308 3308
Typical Performance PointsAir Flow Pressure0 CFM in. H2O 0.76 0.76
250 CFM in. H2O 0.72 0.72
500 CFM in. H2O 0.66 0.66
750 CFM in. H2O 0.60 0.60
1000 CFM in. H2O 0.55 0.55
1250 CFM in. H2O 0.41 0.41
1500 CFM in. H2O 0.23 0.23
1750 CFM in. H2O 0.16 0.16
1947 CFM in. H2O 0.00 0.00
INCH(MILLIMETER)
Performance
3500
4500
5500
0 50 100 150 200 250 300 350 400 450
Sp
eed
- R
PM
0.0
2.0
4.0
6.0
8.0
10.0
12.0
14.0
0 50 100 150 200 250 300 350 400 450
Cur
rent
- A
mp
s
0
0.25
0.50
0.75
1.00
1.25
1.50
1.75
0 50 100 150 200 250 300 350 400 450
Air Flow - Feet3 /Minute at 0.075 Lbs/Ft3
0
62
124
187
249
311
373
4350 85 170 255 340 425 510 595 680 765
Sta
tic P
ress
ure
- P
asca
ls
Air Flow- Meters3 /Hour at 1.202 Kg/M3
Sta
tic P
ress
ure
-Inc
hes
of
Wat
er
27.6 VDC 13.8 VDC12/24 VDC(actual 13.8/27.6 VDC)
FeaturesBlowers• Lightweight molded plastic
construction
• 12 VDC and 24 VDC models available
Brushless Motor• Electronically Commutated DC
(ECDC™) motor design provides for maintenance free operation by eliminating brush motor failures and brush maintenance
• Medium and heavy duty construction as required for transit bus and construction equipment
• Multiple speeds or variable speed available without the use of dropping resistors
RTP1300 Brushless DC Blower40,000 Hour Design Life
Multi-Purpose Use Applications include:• A/C Evaporator Blowers
• Underseat Heater Blowers
• Defroster Blowers
• Driver’s Booster Blowers
This document is for informational purposes only and should not be considered as a binding description of the products or their performance in all applications. The performance data on this page depicts typical performance under controlled laboratory conditions, data is corrected to 0.075 lb./ft3 air density (29.92” Hg @ 70O F). Actual performance will vary depending on the operating environment and application. AMETEK products are not designed for use with volatile, hazardous, or corrosive gases. Blower housings are not sealed, slight air/gas leakage will occur. AMETEK Rotron products are not designed for and should not be used in medical life support applications. AMETEK reserves the right to revise its products without notification. The above characteristics represent standard products. For product designed to meet specific applications contact AMETEK Marketing and Sales.
100 EAST ERIE STREET • KENT OH 44240 U.S.A. • TEL: 330-673-3452 • FAX: 330-677-3306
www.ametektip.com
© 2013 by AMETEK, Inc. All rights reserved .250413AGP (140112)
Dimensions
RTP1300 Brushless DC Blower40,000 Hour Design Life
NOTES: * These blowers can be equipped with an option allowing for up to 4 distinct speed settings. Please inquire with the Marketing/Sales
Department for specific set points.* Temperature: Working Ambient Air: -40OC to 70OC, Storage Air: -40OC to 85OC.* Environmentally resistant design. Please discuss specific operating environment with the Marketing/Sales Department.* Approximate Typical Weight: 6.0 lbs.* RTP1300 Blower requires the use of an external drive module sold separately.
Blower Data Unit of Part Number Measure TBD* 150222-00*
Voltage Input VDC 12 (actual 13.8) 24 (actual 27.6)Flow Rate, Max. (Open Flow) CFM 378 378 m3/hr 642 642
Typical Performance PointsAir Flow Pressure0 CFM in. H2O 1.46 1.46
50 CFM in. H2O 1.31 1.31
100 CFM in. H2O 1.17 1.17
150 CFM in. H2O 1.20 1.20
200 CFM in. H2O 0.95 0.95
250 CFM in. H2O 0.77 0.77
300 CFM in. H2O 0.57 0.57
350 CFM in. H2O 0.23 0.23
378 CFM in. H2O 0.00 0.00
INCH(MILLIMETER)
Performance
0
0.25
0.50
0.75
1.00
1.25
1.50
1.75
2.00
2.25
2.50
2.75
3.00
3.25
3.50
0 50 100 150 200 250 300 350 400 450 500 550 600 6500
62
124
187
249
311
373
435
498
560
622
684
746
809
8710 84.96 169.92 254.88 339.84 424.8 509.76 594.72 679.68 764.64 849.6 934.56 1019.52 1104.48
0.0
5.0
10.0
15.0
20.0
0 50 100 150 200 250 300 350 400 450 500 550 600 650
27.6 VDC 13.8 VDC12/24 VDC(actual 13.8/27.6 VDC)
3500
4500
5500
0 50 100 150 200 250 300 350 400 450 500 550 600 650
Sp
eed
- R
PM
Cur
rent
- A
mp
s
Air Flow - Feet3 /Minute at 0.075 Lbs/Ft3
Sta
tic P
ress
ure
- P
asca
ls
Air Flow - Meters3/Hour at 1.202 Kg/M3
Sta
tic P
ress
ure
-Inc
hes
of
Wat
er
RTP1400 Brushless DC Blower40,000 Hour Design Life
FeaturesBlowers• Lightweight molded plastic
construction
• 12 VDC and 24 VDC models available
Brushless Motor• Electronically Commutated
DC (ECDC™) motor design provides for maintenance free operation by eliminating brush motor failures and brush maintenance
• Medium and heavy duty construction as required for transit bus and construction equipment
• Multiple speeds or variable speed available without the use of dropping resistors Multi-Purpose Use
Applications include:• A/C Evaporator Blowers
• Underseat Heater Blowers
• Defroster Blowers
• Driver’s Booster Blowers
This document is for informational purposes only and should not be considered as a binding description of the products or their performance in all applications. The performance data on this page depicts typical performance under controlled laboratory conditions, data is corrected to 0.075 lb./ft3 air density (29.92” Hg @ 70O F). Actual performance will vary depending on the operating environment and application. AMETEK products are not designed for use with volatile, hazardous, or corrosive gases. Blower housings are not sealed, slight air/gas leakage will occur. AMETEK Rotron products are not designed for and should not be used in medical life support applications. AMETEK reserves the right to revise its products without notification. The above characteristics represent standard products. For product designed to meet specific applications contact AMETEK Marketing and Sales.
100 EAST ERIE STREET • KENT OH 44240 U.S.A. • TEL: 330-673-3452 • FAX: 330-677-3306
www.ametektip.com
© 2013 by AMETEK, Inc. All rights reserved .250413AGP (140112)
Blower Data Unit of Part Number Measure 150229-01 150221-00
Voltage Input VDC 12 (actual 13.8) 24 (actual 27.6)Flow Rate, Max. (Open Flow) CFM 568 619 m3/hr 964 1051
Typical Performance PointsAir Flow Pressure0 CFM in. H2O 2.78 3.25
100 CFM in. H2O 2.37 2.75
200 CFM in. H2O 2.18 2.49
300 CFM in. H2O 1.95 2.30
400 CFM in. H2O 1.40 1.85
500 CFM in. H2O 0.60 1.18
568 CFM in. H2O 0.00 0.49
600 CFM in. H2O N/A 0.10
NOTES: * These blowers can be equipped with an option allowing for up to 4 distinct speed settings. Please inquire with the Marketing/Sales
Department for specific set points.* Temperature: Working Ambient Air: -40OC to 70OC, Storage Air: -40OC to 85OC.* Environmentally resistant design. Please discuss specific operating environment with the Marketing/Sales Department.* Approximate typical weight: 9.0 lbs.
Dimensions
RTP1400 Brushless DC Blower40,000 Hour Design Life
INCH
(MILLIMETER)
Performance
RTP1600 Brushless DC Blower40,000 Hour Design Life
FeaturesBlowers• Lightweight molded plastic
construction
• 12 VDC and 24 VDC models available
Brushless Motor• Electronically
Commutated DC (ECDC™) motor design provides for maintenance free operation by eliminating brush motor failures and brush maintenance
• Medium and heavy duty construction as required for transit bus and construction equipment
• Multiple speeds or variable speed available without the use of dropping resistors
Multi-Purpose Use Applications include:• A/C Evaporator Blowers
• Underseat Heater Blowers
• Defroster Blowers
• Driver’s Booster Blowers
0
0.25
0.50
0.75
1.00
1.25
1.50
1.75
2.00
2.25
0 100 200 300 400 500 600 700 800 9000
62
124
187
249
311
373
435
498
5600 85 170 255 340 425 510 595 680 765 850 935 1020 1104 1189 1274 1359 1444 1529
27.6 VDC 13.8 VDC12/24 VDC(actual 13.8/27.6 VDC)
Air Flow - Feet3 /Minute at 0.075 Lbs/Ft3
Sta
tic P
ress
ure
- P
asca
ls
Air Flow - Meters3/Hour at 1.202 Kg/M3
Sta
tic P
ress
ure
-Inc
hes
of
Wat
er
0
5.0
10.0
15.0
20.0
25.0
0 100 200 300 400 500 600 700 800 900
Cur
rent
- A
mp
s
2000
3000
4000
0 100 200 300 400 500 600 700 800 900
Sp
eed
- R
PM
This document is for informational purposes only and should not be considered as a binding description of the products or their performance in all applications. The performance data on this page depicts typical performance under controlled laboratory conditions, data is corrected to 0.075 lb./ft3 air density (29.92” Hg @ 70O F). Actual performance will vary depending on the operating environment and application. AMETEK products are not designed for use with volatile, hazardous, or corrosive gases. Blower housings are not sealed, slight air/gas leakage will occur. AMETEK Rotron products are not designed for and should not be used in medical life support applications. AMETEK reserves the right to revise its products without notification. The above characteristics represent standard products. For product designed to meet specific applications contact AMETEK Marketing and Sales.
100 EAST ERIE STREET • KENT OH 44240 U.S.A. • TEL: 330-673-3452 • FAX: 330-677-3306
www.ametektip.com
© 2013 by AMETEK, Inc. All rights reserved .250413AGP (140112)
NOTES: * These blowers can be equipped with an option allowing for up to 4 distinct speed settings. Please inquire with the Marketing/Sales
Department for specific set points.* Temperature: Working Ambient Air: -40OC to 70OC, Storage Air: -40OC to 85OC.* Environmentally resistant design. Please discuss specific operating environment with the Marketing/Sales Department.* Approximate typical weight: 10.0 lbs.
Blower Data Unit of Part Number Measure 150225-00 150226-00
Voltage Input VDC 12 (actual 13.8) 24 (actual 27.6)
Flow Rate, Max. (Open Flow) CFM 877 872
m3/hr 1490 1482
Typical Performance PointsAir Flow Pressure0 CFM in. H2O 2.10 2.10
100 CFM in. H2O 1.76 1.76
200 CFM in. H2O 1.58 1.58
300 CFM in. H2O 1.45 1.45
400 CFM in. H2O 1.26 1.26
500 CFM in. H2O 1.20 1.20
600 CFM in. H2O 0.99 0.99
700 CFM in. H2O 0.73 0.73
800 CFM in. H2O 0.34 0.34
872 CFM in. H2O 0.00 0.01
877 CFM in. H2O N/A 0.00
Dimensions
RTP1600 Brushless DC Blower40,000 Hour Design Life
INCH(MILLIMETER)