TRANSMISSION OILS FOR
MANUAL GEARBOXES
OUR PRODUCT RANGE
Info Are you uncertain about the type of lubricant you need for
your vehicles and machines? Contact our technical service
department, we’ll be pleased to help you choose the optimal product
for you.
Help Line +32 (0) 2 365 02 00 or send us a mail at
[email protected]
Motor oilsS Synthetic and mineral oils, for light
petrol up to heavy diesel enginesS Two-stroke motor oils
Transmission oilsS Mineral and synthetic S Multi grade, API GL4
& GL5 S ATF oils
Hydraulic liquidsS Filtered Hydraulic oils (Nas 6) S Zinc-free
and zinc-containing hydraulic oils S Biodegradable oils S
Nonflammable hydraulic liquids
Specialities for the industryS Compressor oils S Compressed air
lubrication S General lubrication S Transformer oils S Gearbox oils
S Thermal oils S White oils
SpraysS Silicone spraysS Sprocket & gear wheels S
Anticorrosion S Tapping oils S Brake cleaner S Penetrating oils S
White grease S Food grade qualityS PTFE
Winter productsS Antifreeze S Coolants S Windscreen washer
fluids
Metalworking fluidsS Water miscible and neat oils for all
ferrous and non-ferrous metalsS Forming oilsS Grinding fluids S
Rust preventive oils S Vanishing oils S Spray oils S Slideway
oils
Food-grade lubricantsS Lubricants for the food industry
(USDA H1/NSF)
GreasesS Greases for bearings S Multi purpose greases S Greases
with PTFE, graphite and MoS2 additives S Biodegradable greases S
Greases for high temperatures S Specialities
High quality range for motorcyclesS Oils for motor,
transmission, fork
and chains
EquipmentsS Grease pumps S Skimmers S Refractometers S Filtering
devices S Dosage pumps S Hose reels S Spill trays
Agriculture & ForestryS Chain saw oils S Biodegradable oils
and greases S Two-stroke and four-stroke oils
Cleaning productsS Degreasing agents S Hand soaps S Oil
absorbing granulates
UNIL LUBRICANTSSINCE 1903
BELGIUMBergensesteenweg 7131600 Sint-Pieters-LeeuwTel. +32 (0)2
365 02 00Fax +32 (0)2 360 01 12
[email protected]@unil.com
www.unil.com
ISO 9001 - ISO 14001Certified
PRODUCT SAE DESCRIPTION NORMS SPECIFICATIONS
GERION LS 75W9075W140
100% synthetic EP-oils (extreme pressure), especially developed
for the lu-brication of axles with a limited-slip differential.
This type of axle is installed on numerous sports and racing cars,
as well as on sports utility and public works vehicles.
API GL4/GL5-LS • MAN 341 Type E3 • MAN 341 Z2 • MAN M 342 M3 •
SCANIA STO:01 • API MT-1 • DAF • IVECO • MB-Approval 235.8 •
ZF-TE-ML 02B/01/12B/16F/17B/19C/21B
• Effective protection for the most severe hypoid gears under
all operating conditions.
GERION DRIVE 75W9075W140
100% synthetic LONG DRAIN oil, designed for gearboxes and rear
axles on industrial vehicles and excavation machinery that are
subject to heavy loads. It is ideal for simplifying the supply of
lubricants.
API GL4/GL5/MT-1 • ARVIN MERITOR 0-76-N • DAF • IVECO • MACK
GO-J • MAN 341 Z2 • MAN M 342 M3 • MB 235.11 • MIL-PRF-2105 E • SAE
J2360• SCANIA STO:01 • ZF-TE ML 02B/05B/07A/16F/17B/12B/19C/21B
• Excellent liquidity at low temperatures.• Extraordinary
thermal stability.• Good antiwear properties.• Fuel savings thanks
to the reduction of friction.
GERION EXTRA 75W90 Synthetic oil used, for instance, for
gearboxes of passenger carsusing cold fluid oil (Renault, Peugeot,
Citroën).
API GL4/GL5 • MAN 342 M1 • MB 235.0 • MIL-L-2105D • VOITH •
VOLVO 97310/ 97316 • ZF-TE ML07A/16B/16C/16D/17B/19B/21A
• High viscosity index and good liquidity at low temperatures;
makes changing gears easier.• Severe operating conditions possible
thanks to excellent ‘extreme pressure’ properties.
GERION LE 75W80 For gearboxes of passenger cars, freight
lorries, agricultural machines, earth-moving machines and forklift
trucks, where API GL4 stan-dard oil is required. It is also
suitable for medium-load rear axles and reverse clutches, if they
fulfil the ‘extreme pressure’ requirement of the manufac-turer.
API GL4 • ZF-TE-ML 02D • MAN 341 Type E3/Z3 • DAF • IVECO •
Volvo 97307 • RENAULT
• Strongly improved antiwear and extreme pressure properties,
for an excellent protection of the gears.• Optimised lubrication
during cold starts thanks to good liquidity at low temperatures.•
Compatible with non-ferrous metals.• Thermal stability and good
oxidation resistance that is required by high operating
temperatures of modern transmissions.
GEAR EP 80W8580W9085W140
For gearboxes of passenger cars, freight lorries, agricultural
machines, earth-moving machines and forklift trucks, where API GL4
stan-dard oil is required. It is also suitable for medium-load rear
axles and reverse clutches, if they fulfil the ‘extreme pressure’
requirement of the manufac-turer.
API GL4 • MB 235.1 • MAN 341 Type E1/Z1 • ZF TE ML
02A/16A/17A/19A
• Increased ‘extreme pressure’ and antiwear properties.•
Excellent lubrication at all temperatures.• High thermal
stability.
GEAR LS 80W9085W9085W140
Extreme pressure (EP) oils that have been developed especially
for the lu-brication of axles with a limited-slip differential.
This type of axle is installed on numerous sports and racing cars,
as well as on sports utility and public works vehicles.
API GL5-LS • Ford M2C 104A •ZF-TE-ML 05
• Increased ‘extreme pressure’ and antiwear properties.
GEAR ZF 80W9085W9085W140
For geared transmissions subject to heavy loads, such as
gearboxes and hypoid rear axles of industrial vehicles, earthmoving
machines, agricultural machines and those machines where the
manufacturer recommends API GL5.
API GL5 • MB 235.0 • DAF • MAN 342 M1 • MIL-L-2105D • RENAULT •
VOITH 3.325-339 • VOLVO 97310/97316 • ZF-TEML
01/05A/07A/16B/16C/16D /17B/19B/21A
• Increased ‘extreme pressure’ and antiwear properties.•
Excellent lubrication at all temperatures.• High thermal
stability.
MULTIGEAR 75W80 Synthetic oil used, for instance, for gearboxes
of passenger cars using cold fluid oil (Renault, Peugeot,
Citroën).
API GL5 • High viscosity index and good liquidity at low
temperatures; makes c hanging gears easier.• Severe operating
conditions possible thanks to excellent ‘extreme pressure’
properties.• Extraordinary thermal stability.
UNIVERSAL GEAR 80W90 This oil fulfils both the API GL4 and GL5
standards. It is ideal for simplifying the supply of
lubricants.
API GL4/GL5 • Increased ‘extreme pressure’ and antiwear
properties.