PBSI Group Limited Registered Office, Belle Vue Works, Boundary Street, Manchester, M12 5NG Company No. 2030212 Cardiff P&B Weir Electrical, Unit 1, Leafield Way, Leafield Ind. Est., Corsham, Wiltshire, SN13 9SW, UK T: 0044 (0)1225 811 449 F: 0044 (0)1225 810 909 E: [email protected] W: www.pbsigroup.com Product Benefits • Solid construction to give extended service • Proven service record used by ESI for over 40 years • Lightweight and good corrosion resistance P&B Weir Electrical Products Transmission Line Earthing Line End Clamps P&B Weir Electrical is a UK owned and based company providing leading technology electrical system solutions to Industrial and Utility customers worldwide. The Transmission Line range of portable earthing is suitable for temporary earthing of conductors within the range 132kV, 275kV and 400kV. CE13/A The CE13/A line end clamp is intended to be applied by means of an operating socket, which is attached to an OL1 insulated operating pole and designed to be applied in a near horizontal position, from the tower cross arm over tension set insulators to the conductor. The CE13/A clamp accommodates a range of conductors from 19mm to 42mm. CE69 The CE69 clamp is to be applied in either an upward or downward direction and only by means of an OL1 operating socket attached to an insulated operating pole. The spring loaded jaws enable the clamp to be slipped easily over the line conductor and retains the clamp position whilst the operating screw is being tightened or loosened. The clamp is suitable for application to conductors ranging from 13mm to 46mm. CE13/A CE69 Quality Assurance V2
Welcome message from author
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
PBSI Group Limited Registered O�ce, Belle Vue Works, Boundary Street, Manchester, M12 5NG Company No. 2030212 Cardi�
P&B Weir Electrical, Unit 1, Lea�eld Way, Lea�eld Ind. Est., Corsham, Wiltshire, SN13 9SW, UKT: 0044 (0)1225 811 449 F: 0044 (0)1225 810 909 E: [email protected] W: www.pbsigroup.com
Product Bene�ts
• Solid construction to give extended service
• Proven service record used by ESI for over 40 years
• Lightweight and good corrosion resistance
P&B Weir Electrical Products
Transmission Line EarthingLine End ClampsP&B Weir Electrical is a UK owned and based company providing leading technology electrical systemsolutions to Industrial and Utility customers worldwide.The Transmission Line range of portable earthing is suitable for temporary earthing of conductors within the range 132kV, 275kV and 400kV.
CE13/A
The CE13/A line end clamp is intended to be applied by means of an operating socket, which is attached to an OL1 insulated operating pole and designed to be applied in a near horizontal position, from the tower cross arm over tension set insulators to the conductor. The CE13/A clamp accommodates a range of conductors from 19mm to 42mm.
CE69
The CE69 clamp is to be applied in either an upward or downward direction and only by means of an OL1 operating socket attached to an insulated operating pole. The spring loaded jaws enable the clamp to be slipped easily over the line conductor and retains the clamp position whilst the operating screw is being tightened or loosened. The clamp is suitable for application to conductors ranging from 13mm to 46mm.
CE13/A
CE69
Quality Assurance
V2
Related Documents
