Transmission & Clutch - Big Boar V-Twin

Transmission& Clutch

10

Please see Cautionary Information in back of catalog.10.02

10

TRANSMISSION & CLUTCH

*Prices shown are suggested retail prices only. Actual retail prices are determined by each dealer and may vary.All parts are sold each unless otherwise noted. Retail prices may reflect an each quantity.

BLACK 6-SPEED RIGHT-SIDE DRIVE

RIGHT-SIDE DRIVE OUTER BEARING SUPPORT FOR PULLEY680256

BLACK 6-SPEED LEFT-SIDE DRIVE

680253

POLISHED 6-SPEED LEFT-SIDE DRIVE WITH KICKER

680257

POLISHED 6-SPEED RIGHT-SIDE DRIVE

680251

PerformanceTransmission

Heavy-Duty

FIVE YEAR OR50,000 MILEL IM I T EDWARRANTY

REVTECHRevTech 6-Speed Transmission AssembliesAll-new, 6-speed transmission assemblies from RevTech. These transmissions for Softails are available in right and left-side drive, with your choice of three different finishes – polished, black, and natural. The left-side drive transmissions are offered with a stock end cover, or an optional kicker that has a fully-machined forged aluminum kicker cover, and precision-machined shafts with specially-designed ratchet gears. The LSD transmissions feature all-new 356-T6 cast aluminum cases, with forged trap doors.The RSD transmissions feature a forged billet aluminum support plate with a hydraulic clutch cylinder and contemporary styling, a large-diameter outside pulley support bearing, and a gold zinc-coated 32-tooth lightened pulley. All these transmissions were subjected to independent dyno durability testing by a U.S. company in Texas. They were tested for over 120 non-stop hours at extremely high loads, as well as an additional 50,000 shift cycles (10,000 in each gear), and passed easily. The RSD transmissions are designed for custom wide tire builds, and the LSD transmissions fit 90–99 Softails, as well as most custom aftermarket frames.Note: Installation on 94 and newer models will require a speedometer recalibration unit.

RSD transmission features include:• Unique new RSD design.• Large 4.30”-diameter outside bearing support for pulley.• Forged outer support plate with hydraulic clutch.• Gold zinc pulley.• Stylish window cutouts.• Chrome belt guard.

Some of the other features these transmissions include:• Precision-machined, investment cast steel shift forks.• Fully CNC machined steel shift drum.• Cast 356-T6 aluminum cases.• Forged 6061 aluminum trap door.• 2.93:1 first gear.• 2.20:1 second gear.• 1.60:1 third gear.• 1.23:1 fourth gear.• 1.00:1 fifth gear and a 0.88:1 overdrive sixth gear.• 8620H high nickel content chromemoly steel gears.• Extra-quiet gear tooth profiles with helical 5th and 6th

gears on the left-side drive transmissions.• Endurance dyno tested by an independent U.S. test lab.

Right-Side Drive 6-Speed for Softails680257 Polished. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $1,699.99

680256 Black wrinkle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $1,699.99

680255 Natural . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $1,699.99

Left-Side Drive 6-Speed with Kicker for Softails. Fits Softail models 90-99.680251 Polished. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $1,699.99

680250 Black wrinkle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $1,699.99

680249 Natural . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $1,699.99

Left-Side Drive 6-Speed for Softails. Fits Softail models 90-99.680254 Polished. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $1,299.99

680253 Black wrinkle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $1,145.99

680252 Natural . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $1,132.99

Replacement parts for RSD transmissions697403 RSD 6 hydraulic piston assembly (incl. bearing and seal) . .$65.99

689311 RSD chrome belt guard . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$46.99


w w w.customchrome.com 10.03

SEATS &BAGS

FOOTCONTROLS

LIGHTING

ELECTRICAL

EXHAUST

ENGINE

GASKETS

DRIVELINE

WHEELSTIRES &BRAKES

CHASSIS

INSTRUMENTS& GAUGES

GENERAL

CROSSREFERENCE

HANDCONTROLS

SHEETMETAL

TRANSMISSION& CLUTCH

INTAKE

APPAREL

58340

RevTech ‘6-Speed Overdrive’ Complete Transmission AssembliesAt last there’s a solution that reduces vibration and improves acceleration. When the bike hits freeway speeds, simply shift into 6th gear and lower the cruising RPM. Freeway cruising becomes more enjoyable with reduced vibration, increased gas mileage while keeping the engine in the heart of it’s torque band. All of our RevTech 6-speed transmissions are complete, and ready-to-install in place of the stock transmission with absolutely no modifications required! Every transmission features a forged aluminum trap door to withstand the performance demands of high-output motors, and gears made from 8620H chromemoly steel with precision-ground teeth and back-cut gear dogs for smooth and accurate engagement. Quieter operation is achieved with mainshafts and countershafts that feature major-diameter fit-splines, and the shift forks are investment cast for strength and durability. In addition to these ground-breaking innovations, a CNC-machined, radially-uniform shift cam is used for smooth, precise gear shifting and a shift lever throw that is same in every gear. Every RevTech 6-speed uses a close-ratio 2.94:1 first gear and 0.893:1 overdrive 6th gear, and have chrome covers fitted to cases with polished or black wrinkle painted finishes. The chrome end cover features the distinctive RevTech 6-speed logo laser-etched into its surface.

Fits Softail Models from 90-9958340 Polished. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $1,099.99

58321 Black wrinkle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$999.99

Replacement Parts30438 Speedometer pickup spacer plate . . . . . . . . . . . . . . . . . . . . . . .$3.49

Note: Installation on 94-99 models with electronic speedometers will require speedometer recalibration. Use CC #690710 and special neutral switch (CC #30439) on 1998 and newer models.

U.S. Patent #6,155,125

Performance6-SPEED

FIVE YEAR OR50,000 MILEL IM I T EDWARRANTY

REVTECH

Speedometer Recalibration Unit.This unit is the state of the art plug and play. It plugs in between the pick-up sensor and the speedometer using the OEM plugs. It is very simple to recalibrate your electronic speedometer in minutes. This unit is perfect to use with our RevTech 6-Speed gear sets or transmissions when installing into Harley big Twin models 96-06 or custom bikes using a electronic speedometer. Measures 2-3/8” x 1-1/2” x 3/4”. Sold each.690710 Fits Harley Big Twin models 96-06 . . . . . . . . . . . . . . . . . . . . .$99.99

Transmission Neutral Light SwitchThis neutral switch is required when using a RevTech 6-speed transmission or gear set on all models 98-99. Switch restores function of neutral indicator light.30439 Neutral light switch . . . . . . . . . .$14.99

http://www.cus/


10



58305

58297

RevTech 5-Speed TransmissionsComplete your custom-framed scooter with a brand new RevTech 5-speed transmission. Engineered and manufactured at a state-of-the-art facility to rigid standards and perfectly suited for use as replacements for Original Equipment units or for special construction projects.

Close-Ratio for Softail Models from 90-992.94:1 first gear provides less RPM drop when shifting from first to second.58302 Black wrinkle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$1,049.99

58305 Polished. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $999.99

Close-Ratio with Kicker for Softail Models from 90-992.94:1 first gear and a kicker for those of you building minimalist choppers. May requires the use of custom built exhaust systems.58296 Black wrinkle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$1,259.99

58297 Polished. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$1,299.99

658294 Natural . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$1,259.99

RevTech Five-Speed in a Four-Speed Case with KickerThe ultimate transmission for the retro look. Get the classic look of a four speed kicker and the performance benefit of a smooth shifting 5-speed. This transmission works in virtually any electric-start, four-speed Big Twin with forward controls (will not work with mid controls). This 5-Speed has a close 2.94:1 ratio 1st gears and stock 1:1 ratio 5th gears. It combines a heavy-duty kicker assembly with the early five-speed end cover and clutch actuation lever, with clutch cable, five-speed shifting mechanism, gears and top cover in a four-speed-sized case. What could be better than a classic Shovelhead that shifts better than the newest showroom models?58295 Fits all 4-speed Big Twins with forward controls from 70-E84. Also ideal for

special projects in 4-speed frames . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$1,399.99

58290 Conversion kit ONLY with kicker mechanism, end cover and special adapter to convert our 5-speed in a 4-speed case transmission (CC #58301) to kicker . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $499.99

Notes: Does not fit Softail frames. Comes with 23-tooth chain sprocket and is designed for chain final drive only. No provision is made for electronic speedometer sensor. Not intended for use with CC fat o-ring chains. This transmission is not designed to be a direct replacement on all models. Clutch arm may require modification depending on model year and application.

RevTech Five-Speed in a Four-Speed CaseHere’s a transmission that’s a bolt-in proposition for virtually any electric-start, four-speed Big Twin. This 5-Speed has a close 2.94:1 ratio 1st gears and stock 1:1 ratio 5th gears. It combines the early five-speed end cover and clutch actuation lever with five-speed shifting mechanism, gears and top cover in a four-speed-sized case. 58301 Fits all FL models from 70-E84 and FX models

from 72-E84. Also suitable for special construction projects with 4-speed frames. . . . . . . . . . . .$1,299.99

Notes: Does not fit Softail frames. Comes with 23-tooth chain sprocket and is designed for chain final drive only. No provision is made for kickstart mechanism or electronic speedometer sensor, nor OEM-style transmission speedometer drive. Front wheel driven speedometer required.

58295

58290

OFIVE YEAR OR50,000 MILEL IM I T EDWARRANTY

REVTECH

58302



SEATS &BAGS

FOOTCONTROLS

LIGHTING

ELECTRICAL

EXHAUST

ENGINE

GASKETS

DRIVELINE

WHEELSTIRES &BRAKES

CHASSIS

INSTRUMENTS& GAUGES

GENERAL

CROSSREFERENCE

HANDCONTROLS

SHEETMETAL


INTAKE

APPAREL

RevTech 4-Speed Transmissions for Tin Primary ModelsOur complete transmissions for 36-64 Big Twins have all the great features of our 4-speed transmissions. The biggest difference is that we altered the casting molds to remove the primary mounting ears used with aluminum primaries. The result is a transmission that bolts into virtually any rigid or swingarm kickstart frame. And it’s perfect for building a ‘retro’ custom bike that uses tin primary, chain final drive and kick starter. Transmissions are assembled with our 36-64 RevTech gear sets, chrome ratchet top and heavy-duty kicker kit.30651 2.44:1 ratio transmission assembly (CC #30700 gear set)

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$1,149.99

30661 2.60:1 ratio transmission assembly (CC #30705 gear set) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$1,149.99

30651

RevTech Complete Close-Ratio 4-Speed TransmissionsComplete 4-speed transmissions are designed around our RevTech cases and highly-regarded RevTech close-ratio gear sets. Bolt it in and just add oil (and even that’s included). The 2.44:1 close-ratio first gear model has a 1.35:1 close-ratio third gear and is ideal for FX models. With 2.60:1 close-ratio first gear and 1.35:1 close-ratio third gear it is perfect for FL models. Both sets provide a more usable first gear and eliminate second gear ‘clunk’ with better pull in third gear. RevTech gear faces are honed and finish ground for maximum strength and precise engagement. Shifter clutches and shifter dog faces are widened .020" for better durability. RevTech 4-speed cases are machined from ‘356’ aluminum alloy castings and heat-treated to ‘T6’. They are finished with our chrome heavy-duty kicker kit and chrome ratchet top. Included is a set of 1:1 ratio speedometer drive gears, a chrome clutch release lever with chrome cover and a 23-tooth transmission sprocket. Transmissions are shimmed and tested and include studs for installation on the mounting plate and the inner primary. They fit most stock and custom 4-speed Big Twin frames using running gear from 70-early 84 (see notes), and may use either early (36-64) or late (65-84) transmission mounting plates.Natural Aluminum Case30650 2.44:1 first gear ratio transmission assembly (CC #30720 gear

set) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $1,149.99

30660 2.60:1 first gear ratio transmission assembly (CC #30725 gear set) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $1,149.99

Polished Case30655 2.44:1 first gear ratio transmission assembly . . . . . . . . . . $1,199.99

30665 2.60:1 first gear ratio transmission assembly . . . . . . . . . . $1,199.99Installation Notes:

1) These transmissions should not be used in models with final belt drives.

2) Recessed screws on kicker require shimming the stock battery box mounts with the included spacer kit. Mid-shift FX models use included shims for mounting the brake pedal backing plate.

3) Shift pattern is reversed when installed in mid-shift models.

4) Kicker arm may interfere with some OEM exhausts. Late-style ‘swing-out’ kick arm provides sufficient clearance.

OFIVE YEAR OR50,000 MILEL IM I T EDWARRANTY

REVTECH

658455 RevTech Six-Speed in a Four-Speed Case with KickerLooking for a tranny for that big inch Pan or Shovel that you built? Here it is. Retain the four speed retro look but have the benefits of a modern six speed transmission. What could be better than a classic Pan or Shovel that shifts better than the newest models? • Heavy duty kicker assembly• Includes 23 tooth sprocket• Precision machined cast steel shift forks• 8620H high nickel content chromemoly steel

gears• Helical 5th and 6th gears• Overdrive sixth gear with reduction of 500 rpm 658455 6-in-4 raw/chrome for 4 speed Big Twins

70-E84 . . . . . . . . . . . . . . . . . . . . . . . . . $1,999.99

658456 6-in-4 raw/chrome for custom applications with tin primary . . . . . . . . . . . . . . . . $1,999.99

Notes: Does not fit Softail frames. Comes with 23-tooth chain sprocket and is designed for chain final drive only. No provision is made for electronic speedometer sensor. Not intended for use with CC fat O-ring chains. This transmission is not designed to be a direct replacement on all models. Clutch arm may require modification depending on model year and application.

http://www.cus/


10



RevTech 6-Speed Overdrive Gear SetsComplete gear sets feature a close-ratio 2.94:1 first gear and .893:1 overdrive sixth gear. They’re de-signed to fit into Original Equipment or aftermarket transmission cases and trap doors with absolutely no modifications. Complete gear sets include mainshaft, countershaft, split bearings, first thru sixth main and countershaft gears, shift cam, right shift tower assembly, shift forks, main drive gear seal and bearings, snap rings, thrust washers, main and countershaft nylon-inserted lock nuts, bearings, inner races, trapdoor gasket and a speedo pickup spacer. A chrome-plated billet 6-speed end cover faceplate with the RevTech 6-speed logo laser-etched into its surface is also included (except on CC #58326).58339 Fits Twin Cam 88 Softail models from 00-06, and Touring & Dyna Glide models 99-06 (except 06 Dyna Glide models). . . . . . . . . . . . . . . . . . . . $732.99

58320 Fits all Evolution Big Twin models from 90-98 and 99 Softail models . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $699.99

58325 Fits all 5-speed Big Twin models from 85-89 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $679.99

58326 Fits all 5 speed Big Twin models from 80-E84 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $699.99Note: Installation on 94-Up models with electronic speedometers will require speedometer recalibration. Use CC #690710 and special neutral switch (CC #30439) on 1998 and newer models. Also, when running an electronic speedo, the purchase of a speedo pickup sensor plate (CC #30438) is required.

U.S. Patent #6,155,125

U.S. Patent #6,155,125

RevTech 6-Speed Overdrive Gear Sets with Trapdoor and BearingsThese complete gear sets have close-ratio 2.94:1 first gears and .893:1 overdrive sixth gears and come pre-assembled and ready to bolt into the original equipment transmission cases on most Big Twin models from 90-06. These kits benefit from all of the advantages found in the complete RevTech 6-speed transmission assemblies but without the higher cost. They include all of the parts found in the 6-speed gear sets as well as our RevTech forged aluminum trap door for strength and durability. Having the gear set pre-assembled to the trap door simplifies and speeds up the installation. Each kit also includes a chrome decorative end cover faceplate that bolts to the clutch release cover that features the distinctive RevTech 6-speed logo laser-etched into its surface.658441 Fits Softail models 00-06 and Dyna Glide models 99-05

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $849.99

58345 Fits Evolution Softail & FXR models from 90-99, and Dyna Glide models from 91-98, as well as Touring models from 90-92 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $799.99

658442 Fits Touring models 99-06. . . . . . . . . . . . . . . . . . . . . . . . $849.99

58346 Fits Touring models from 93-98. . . . . . . . . . . . . . . . . . . $804.99

RevTech Alternate First and Sixth GearsCustomize gear ratios in RevTech 6-speed transmissions and gear sets by selecting alternate first and sixth gears. The 3.21 ratio first gear is the same ratio as the OEM first gear used since 1996 (and comparable to the 3.24 ratio used from 80-95 on domestic models), while the .860 ratio sixth gear provides even lower engine RPM at freeway speed.30440 3.21 ratio 1st gear set . . . . . . . . . . . . . . . . . . . . . . . . . . . . $99.99

30442 .860 ratio 6th gear set . . . . . . . . . . . . . . . . . . . . . . . . . . . . $79.99Note: Installation on 94-Up models with electronic speedometers will require speedometer recalibration. Use CC #690710 and special neutral switch (CC #30439) on 1998 and newer models.

Bolts Into Stock Case With No Modifications!

6-SPEED

6-SPEED



SEATS &BAGS

FOOTCONTROLS

LIGHTING

ELECTRICAL

EXHAUST

ENGINE

GASKETS

DRIVELINE

WHEELSTIRES &BRAKES

CHASSIS

INSTRUMENTS& GAUGES

GENERAL

CROSSREFERENCE

HANDCONTROLS

SHEETMETAL


INTAKE

APPAREL

RevTech Gear Sets for 5-Speed Big Twin TransmissionsFeatures include hard-chromed mainshafts, back-cut gears for smoother shifting and your choice of stock 3.24:1 or close-ratio 2.94:1 first gears. All of the gears are made from 8620H high-strength chromemoly steel, with gears finish ground for maximum strength and precise engagement. Gears are also computer measured and matched for smooth, vibration-free operation. Sets include shafts, gears, bearings, spacers and snaprings. Most components are completely compatible with Original Equipment gears as well as other aftermarket offerings.

Stock Price Close-Ratio Price

30506 $559.99 30502 $559.99 Fit all models from 90-94 (also fit custom applications with cable-driven speedometers)

30505 $559.99 30501 $559.99 Fit all models from 85-89 with wet clutch and belt final drive

30504 $559.99 30500 $559.99 Fit all models from 80-E84 with dry clutch and chain final drive

Gear Set for Models with Electronic SpeedometersIntended for use with CC #’s 30502 and 30506 gear sets when installing them in models from 95-05 equipped with electronic speedometers. Includes fourth gear mainshaft and countershaft gears.30527 Replaces OEMs 35028-94 and 35625-94 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $61.99

Replacement Parts for RevTech Transmissions and Gear SetsAll of the parts listed below are only to be used to replace those in RevTech transmissions and gear sets.30510 RevTech 2.94:1 close-ratio first gear, mainshaft. 80-05

RevTech gear set. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $24.99

30516 RevTech 2.94:1 close-ratio first gear, countershaft. 80-05 with RevTech gear set . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $45.99

30511 RevTech second gear, mainshaft (gear is directional) . . $42.99

30532 RevTech third gear, countershaft. 80-05 RevTech gear set (gear is directional) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $43.99

Replacement Parts for RevTech and Original Equipment Transmissions and Gear SetsListed in OEM part number order and are sold each unless otherwise noted.56258 Thrust washers. 80-05 (repl. OEM 6003) Pack of 5. Price

each. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $1.60

30529 Split case bearing, mainshaft and countershaft. 80-05 (repl. OEM 8876A) Pack of 4. Price each. . . . . . . . . . . . . . . . . . . . . $5.25

30530 Bearing, mainshaft fifth gear for models from 80-90 (repl. OEM 8904) Price each. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $8.49

49114 Transmission gear. For Big Twins from 80-05 and Sportster models from 91-03 (repl. OEM 11067) pack 10. Price each. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$1.10

54046 Seal, main drive gear for models from 80-90 (repl. OEM 12013A) Pack of 10. Price each. . . . . . . . . . . . . . . . . . . . . . . . $1.25

54040 Oil seal, Fifth gear mainshaft. 91-98 (repl. OEM 12035) Pack of 10. Price each. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $2.20

30528 Bearing, inner race, mainshaft. 85-03 (repl. OEM 34091-85) Price each. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $15.99

30508 Stock-ratio first gear, mainshaft 3.24:1 80-05 (repl. OEM 35025-79B) Price each.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $24.99

30512 RevTech third gear mainshaft, second gear countershaft (repl. OEM 35027-79A) Price each. . . . . . . . . . . . . . . . . . . . $37.99

Replacement Parts for RevTech and Original Equipment Transmissions and Gear Sets (continued)30513 RevTech fourth gear, mainshaft. (repl. OEM 35028-79) . $37.99

30525 RevTech Fourth gear, mainshaft 95-05 (repl. OEM 35028-94) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $39.99

30520 Fifth gear, mainshaft for all models with dry clutch from 80-E84 (repl. OEM 35029-79) . . . . . . . . . . . . . . . . . . . . . . . . $78.99

30522 Fifth gear, mainshaft for all models with belt drive from 85-90 (repl. OEM 35029-85A). . . . . . . . . . . . . . . . . . . . . . . . $79.99

30514 RevTech fifth gear, mainshaft. 91-94 (repl. OEM 35029-91) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $79.99

30521 Mainshaft for all models with dry clutch from 80-E84 (repl. OEM 35042-79) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $67.99

30523 Mainshaft for all models with belt drive from 85-89 (repl. OEM 35042-85). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $67.99

30515 RevTech Mainshaft for all models with second generation diaphragm clutch from 91-05 (repl. OEM 35042-91) . . . $68.99

30531 Bearing, mainshaft fifth gear for models from 91-05 (repl. OEM 35051-89) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $6.99

56248 Spacer, mainshaft. 80-05 (repl. OEM 35064-79) . . . . . . . . $2.99

30509 Stock-ratio first gear, countershaft 3.24:1. 80-05 (repl. OEM 35622-79C) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $45.99

30517 RevTech fourth gear, countershaft. 80-05 (repl. OEM 35625-79A) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $24.99

30526 RevTech fourth gear, countershaft. 95-05 (repl. OEM 35625-94) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $24.99

30518 RevTech fifth gear, countershaft. 80-05 (repl. OEM 35626-79A) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $26.99

56247 Spacer, countershaft. 80-05 (repl. OEM 35629-86) pack of 10. Price each. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $2.99

30519 RevTech countershaft. 80-05 (repl. OEM 35632-79) . . . . $45.99

56308 Key, clutch hub for models from 85-89 (repl. OEM 37523-85) pack of 10. Price each. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $1.20

http://www.cus/


10



Andrews Gears for 4-Speed TransmissionsMade from stronger-than-stock alloy steel, and heat-treated where necessary. Close-ratio sets come complete with installation instructions.

First Gear Close-Ratio Sets2.44 close-ratio set is best for FXs. The 2.60 ratio is best for FLs. Both sets provide a higher first gear and eliminate second gear clunk, and allow use of a larger engine sprocket for easier starting. For 36-86 Big Twin models.24225 2.44:1 ratio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $118.99

24226 2.60:1 ratio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $118.99Note: When installed in 36-58 transmissions, it is necessary to use a CC #24230 Andrews third gear (OEM 35306-59) third gear. 80-86 FX models require a CC #24229 Andrews second gear (OEM 35751-36)

3rd Gear Close-Ratio Sets for 4-Speed Big Twins1.35:1 close-ratio works great in any Big Twin. More pull in third and better second-to-third shift. Still permits use of speedometer drive gear.24227 36-E76 models (up to serial #U-8958) with loose

rollers. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $215.99

24228 Late 76-86 models (serial #U-8959 up) with caged rollers. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $226.99

Andrews Shafts and Gears for 4-Speed Big TwinsReplacement Gears for Big TwinsStock-ratio gears for Big Twins.24229 Second gear, countershaft. For 40-84 FL models

and 71-79 FX models (repl. OEM 35751-36) 21 tooth. Will fit later models but requires one of the close-ratio first gear sets . . . . . . . . . . . . . . $58.49

24230 Third gear, mainshaft, 59-86 (repl. OEM 35306-59) 24 tooth . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $68.49

24231 Main drive gear, late 38-E77 (repl. OEM 35065-65B) 26 tooth. . . . . . . . . . . . . . . . . . . . . . . . . . . $149.99

24232 Main drive gear, late 77-86 (repl. OEMs 35067-77A, 35067-84) 26 tooth . . . . . . . . . . . . . . . . . $149.99

24233 Shifter clutch, countershaft. For 40-84 FL models and 71-79 FX models (repl. OEM 35665-36) . $38.49

24234 Shifter clutch, mainshaft, late 38-86 (repl. OEM 35440-38) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $38.49

Mainshafts and Countershafts for Big Twins24214 Mainshaft, late 37-64 (repl. OEM 35040-50) $186.99

24215 Mainshaft, 65-69 (repl. OEM 35039-65). . . . $186.99

24216 Mainshaft, 70-E84 (repl. OEM 35039-70A) . $178.99

23978 Mainshaft, 85-86 (repl. OEM 35039-85). . . . $178.99

24212 Countershaft, 37-E76 (repl. OEM 35614-65). $30.99

24213 Countershaft, late 76-79 (repl. OEM 35614-76) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $30.99

24211 Countershaft, 80-86 (repl. OEM 35614-80). . $30.99

Shift Forks24205 Countershaft fork (1st-2nd) repl. OEM 34159-36

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $12.99

24206 Mainshaft fork (3rd-4th) repl. OEM 34158-36 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $12.99

Andrews Gear Sets for 5-Speed TransmissionsComplete Andrews gear sets for 5-speed Big Twin models. Available with either stock (3.24:1) or close-ratio (2.94:1) first gears. Machined lead-in ramps for quick, positive shifting plus reduced wear on drive dogs and slots. Shot-peened, heat-treated, high-nickel alloy gears, with aircraft-quality, heat-treated, high-nickel steel counter and mainshafts.

Andrews Shafts and Gears for 5-Speed Big TwinsClose-Ratio First Gear Set2.94:1 first gear set closes the gaps for close-ratio first-to-second shifting, and about 5 mph more first gear speed.24235 First gear set. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $151.99

Stock-Ratio (3.24:1) First Gears24324 Mainshaft first gear (repl. OEM 35025-79A) . . . . . . . . . . . . . . . . . . . . . . . . . $76.99

24325 Countershaft first gear (repl. OEM 35622-79A). . . . . . . . . . . . . . . . . . . . . . . $76.99

Stock-Ratio Second and Third Gears24269 Mainshaft second or countershaft third (repl. OEM 35026-79A) . . . . . . . $68.49

24270 Mainshaft third or countershaft second (repl. OEM 35027-79A) . . . . . . . $68.49

Stock Fourth Gears24271 Countershaft fourth gear (repl. OEM 35625-79A) . . . . . . . . . . . . . . . . . . . . $39.59

24272 Mainshaft fourth gear (repl. OEM 35028-79) . . . . . . . . . . . . . . . . . . . . . . . . $60.99

Stock Fifth Gear24273 Countershaft fifth gear (repl. OEM 35626-79A) . . . . . . . . . . . . . . . . . . . . . . $39.59

Main Drive Gears24274 Fits all models with dry clutch and chain final drive from 80-early 84 (repl.

OEM 35029-79) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $171.99

24275 Fits all models with wet clutch and belt final drive from 85-90 (repl. OEM 35029-85A) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $171.99

24155 Fits all models with wet clutch and belt final drive 91-93 (repl. OEM 35029-91) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $171.99

Mainshafts24336 Fits all models with dry clutch and chain final drive from 80-early 84 (repl.

OEM 35042-79) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $226.99

24337 Fits all models with wet clutch and belt final drive from 85-89 (repl. OEM 35042-85) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $226.99

24343 Fits all 90 models with second generation diaphragm clutch (repl. OEM 35042-90) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $226.99

24156 Fits all models with second generation diaphragm clutch from 91-05 (repl. OEM 35042-91) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $226.99

Countershafts24338 Fits all models from 80-05 (repl. OEM 35632-79) . . . . . . . . . . . . . . . . . . . . . $94.99

JIMS Transmission Rebuild Kits for 5-Speed ModelsWith a full complement of bearings, races, keys, clips, washers and gaskets, all hard parts are of the highest quality to provide a smooth-shifting, long-lasting transmission. Kits contain virtually all components subject to wear and include a complete set of JIMS gaskets and seals.20441 Fits models from 80-E84 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $249.99

20442 Fits models from late 84-90 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $306.99

20443 Fits models from 91-98 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $269.99

660444 Fits models from 99-06 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $286.99



SEATS &BAGS

FOOTCONTROLS

LIGHTING

ELECTRICAL

EXHAUST

ENGINE

GASKETS

DRIVELINE

WHEELSTIRES &BRAKES

CHASSIS

INSTRUMENTS& GAUGES

GENERAL

CROSSREFERENCE

HANDCONTROLS

SHEETMETAL


INTAKE

APPAREL

2.44:1 Close-Ratio Sets30700 2.44:1 Close-Ratio Sets 36-64 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $599.99

30710 2.44:1 Close-Ratio Sets 65-69 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $479.99

30720 2.44:1 Close-Ratio Sets 70-E77 (loose rollers) . . . . . . . . . . . . . . . . . . . . . . . . $599.99

30730 2.44:1 Close-Ratio Sets Late Late 77-E84 (caged rollers) . . . . . . . . . . . . . . $479.99Note: Late 80-early 84 models require Original Equipment countershaft (OEM 35614-80), which is available as CC #24211.

2.60:1 Close-Ratio Sets30705 2.60:1 Close-Ratio Sets 36-64 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $599.99

30715 2.60:1 Close-Ratio Sets 65-69 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $479.99

30725 2.60:1 Close-Ratio Sets 70-E77 (loose rollers) . . . . . . . . . . . . . . . . . . . . . . . . $599.99

30735 2.60:1 Close-Ratio Sets Late 77-E84 (caged rollers). . . . . . . . . . . . . . . . . . . $479.99Note: Late 80-early 84 models require Original Equipment countershaft (OEM 35614-80), which is available as CC #24211.

RevTech 4-Speed Transmission PartsCompatible with all Original Equipment and aftermarket gears.30756 Mainshaft, late 37-64 (repl. OEM 35040-50) . . . . . . . . . . . . . . . . . . . . . . . . . $62.99

30757 Mainshaft, 65-69 (repl. OEM 35039-65). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $62.99

30758 Mainshaft, 70-E84 (repl. OEMs 35039-80, 35039-70A). . . . . . . . . . . . . . . . . $62.99

30767 Second gear, countershaft for 40-84 FL models and 71-79 FX models (repl. OEM 35751-36) 21 tooth. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $39.99

30770 Shifter clutch, countershaft, 36-86 (repl. OEM 35665-36A) . . . . . . . . . . . . $20.99

30764 Shifter clutch, mainshaft, late 38-86 (repl. OEM 35440-38) . . . . . . . . . . . . $23.99

RevTech 4-Speed Close-Ratio Gear SetsMatched close-ratio transmission gear sets for Big Twin models from 36-E84. Each set is complete with the proper gears, shifter clutches, mainshaft, countershaft, countershaft

bearings and all of the necessary snap rings and thrust washers. The shafts are polished at the spline and maindrive bushing area and include an O-ring groove and seals wherever necessary. Gears are honed and finish ground for precise engagement and maximum strength. The shifter clutches and shifter dog faces are widened .020" to prevent chipping. Many of the components of these high-quality kits are compatible with Original Equipment transmission gears as well as other aftermarket offerings. Because of the high-quality of the materials and workmanship in these components and their affordable low price, they are one of the best values available in the performance transmission market today.

JIMS Transmission Rebuild Kits for 4-Speed ModelsWith a full complement of bearing races, keys, clips, washers and gaskets, these rebuild kits will provide a smooth-shifting, long-lasting transmission. Kit contents are carefully selected to replace components that are subject to wear and include a complete set of James gaskets including all seals. Does not include bearings.

20659 Fits 36-E76 (replc. OEM 33031-36) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $279.99

20660 Fits late 76-E77 (repl. OEM 33031-76E) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $263.99

20661 Fits late 77-E79 (replc. OEM 33031-76L) . . . . . . . . . . . . . . . . . . . . . . . . . . . . $194.99

20662 Fits late 79-86 (repl. OEM 33031-80) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $194.99

Custom Chrome Close-Ratio First Gear Sets for 4-Speed Big Twin ModelsThe 2.447 close-ratio first gear set is best for FXs; 2.660 ratio for FLs. Both sets provide a higher first gear and eliminate second gear clunk, and permit use of a larger engine sprocket for easier starting. Fit Big Twins from 36-86.

2.447:1 Close-Ratio First Gear SetIncludes mainshaft low and second gear cluster (17 x 20 tooth) and countershaft low (24-tooth).25929 Close-ratio set . . . . . . . . . . . . . . . . . . . . . . . . .$56.99

26211 Mainshaft low and second gear ONLY . . .$30.99

26209 Countershaft low gear ONLY. . . . . . . . . . . .$24.99

2.660:1 Close-Ratio First Gear SetIncludes mainshaft low and second gear cluster (16 x 20 tooth) and countershaft low (24-tooth).26501 Close-ratio set . . . . . . . . . . . . . . . . . . . . . . . . .$55.99

26502 Mainshaft low and second gear ONLY . . .$35.99

26503 Countershaft low gear ONLY. . . . . . . . . . . .$27.99Note: When installed in a 36-58 transmission, you must use a CC #26210 third gear or OEM 35306-59 third gear. 80-86 FX models must use a CC #26213 (21 tooth) second gear (OEM 35751-36).

BIG TWIN MAINSHAFT LENGTHS 4 speed:1937-1964: 298mm1965-1969: 304mm1970-1985 (chain): 317mm1984-1986 (belt): 349mm most 5-in-4 speed: 309mm 5 speed:1980-1984: 308mm1985-1989: 358mm1990: 346mm1991-2006: 346mm (except 2006 Dyna)

Custom Chrome Close-Ratio Third Gear Sets for 4-Speed Big Twin ModelsClose-ratio 1.35:1 gear sets work great in any Big Twin from 36-86 for more pull in third and improved second and third gear shifting. Sets include mainshaft third gear (23 tooth) and countershaft gear (15 x 18 tooth) and retain use of speedometer drive gear.

36-E76 (loose rollers)For transmissions up to serial #U-8958.26217 Mainshaft third gear ONLY . . . . . . . . . . . . .$26.99

Late 76-86 (caged rollers)For transmissions from serial #U-8959 up.26215 Close-ratio set . . . . . . . . . . . . . . . . . . . . . . . . .$87.99

26216 Countershaft gear ONLY. . . . . . . . . . . . . . . .$61.99

26217 Mainshaft third gear ONLY . . . . . . . . . . . . .$26.99

http://www.cus/


10



RevTech Pulley KitKit includes 32-tooth front pulley, mounting screws, locking plate, sprocket nut, pulley spacer and mainshaft oil seal.58596 Fits 5-speed Big Twins from 84-05. . . . . . . . . . . . . . . . . . . . . . . .$76.99

RevTech 5-Speed Transmission CasesSo you’re sitting by the side of the road with lube leaking out of your cracked stock transmission case. What to do? Get a RevTech case that won’t crack and leave you stranded. Permanent-mold cast from 356-T6 aircraft-grade aluminum and precision-machined on CNC mills. Here’s the case to cure transmission blues!

For Softail ModelsMade to 90 model specifications to accept OEM, RevTech or aftermarket components for models from 90-99.93523 RevTech black wrinkle empty transmission case. For Softail

models 90-99 (repl. OEM 34732-89A) . . . . . . . . . . . . . . . . . $349.99

93795 RevTech polished transmission case. For Softail models 90-99 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $349.99

For FXR ModelsMade to 90 model specifications to accept OEM, RevTech or aftermarket components for transmissions from 90-94.93521 RevTech black wrinkle empty transmission case for FXR models

90-94 (repl. OEM 34700-89A). . . . . . . . . . . . . . . . . . . . . . . . . $389.99

93680

93526

93527

RevTech 5-Speed Transmission ComponentsTop-quality parts fit Original Equipment or RevTech transmissions.93526 Chrome transmission top cover for all models from 87-98

except Dyna Glide models (repl. OEM 34468-86A). . . . . . . .$32.99

93681 Chrome end cover for all FXR models from 87-00 (repl. OEM 37109-87) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$39.99

93680 Chrome end cover for all Big Twin models (except FXR) from 87-05 (repl. OEM 37105-99) . . . . . . . . . . . . . . . . . . . . . . . . . . . .$45.99

93527 Black forged aluminum bearing housing for all models from 87-98 (except FLT models 93-98) repl. OEM 35260-90B and 35258-87C. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$139.99

93797 RevTech polished forged aluminum bearing housing (trapdoor) 87-99 (except FTL models) rpl. OEM 35250-90B . . . . . . . . .$152.99

93930 Chrome forged aluminum bearing housing for FLT models 93-98 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$152.99

RevTech 5-Speed Shifter KitIncludes, shift drum, tower blocks, bearings, washers, springs, chrome shift lever, seals, retaining rings and hardware.58595 Fits all 5-speed Big Twin models from 80-00 (except 2000

Softail models). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $160.99

Chrome Transmission Shift Lever This custom part replaces the dull factory transmission shift lever with brilliant chrome. Made of steel.060204 Fits 5-speed Big Twins from 80-96 (repl. OEM 33715-85)

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$29.99

688723 Fits 5- and 6-speed Big Twins from 97-Up (repl. OEM 33849-97). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$29.99

060204

688723



SEATS &BAGS

FOOTCONTROLS

LIGHTING

ELECTRICAL

EXHAUST

ENGINE

GASKETS

DRIVELINE

WHEELSTIRES &BRAKES

CHASSIS

INSTRUMENTS& GAUGES

GENERAL

CROSSREFERENCE

HANDCONTROLS

SHEETMETAL


INTAKE

APPAREL

Billet Transmission Dipstick by Pegasus Billet• CNC-Machined Billet Aluminum• Polished finish• Fits 87-06 Big Twins (except 06-later Dynas)• Made in the USA693816 Polished Dipstick. . . . . . . . . . . . . . . . . . . . . . . . . $31.99

693816

Chrome Oil Tank Plugs with DipstickChrome-plated replacement oil tank plugs with dipsticks.93914 Fits Dyna Glide models from 91-99 (repl. OEMs 62681-92A and 62685-95A)

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$29.99

93924 Fits FLT, FLHT, FLHS and Road King models from 93-99 (repl. OEMs 62640-93 and 62607-93) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$22.99

654198

654200 654201

654199

654202

654203

10-Gauge Design Transmission Top Cover by Arlen NessMachined from 6061-T6 forged billet aluminum. This transmission top cover matches the other 10-gauge design parts from Arlen Ness and looks real nice with the matching transmission end covers. Available in chrome or gloss black armor coating that will never fade from heat or UV exposure. Includes necessary gaskets and hardware. Fits Twin Cam Touring and Softail models 07-Up and Dyna Glide models 06-Up. Sold each.654202 Chrome transmission top cover . . . . . . . . . . $198.99

654203 Black transmission top cover. . . . . . . . . . . . . $198.99

10-Gauge Design Transmission End Cover by Arlen NessA unique style to change the look of your transmission. This transmission end cover matches the other 10-Gauge Design parts from Arlen Ness and looks real nice with the matching transmission top covers. Machined from 6061-T6 forged billet aluminum. Available for standard clutch cable models or hydraulic clutch models in chrome or gloss black armor coated that will never fade from heat or UV exposure. Includes necessary gaskets and hardware. The hydraulic cover mounts on top of the OEM hydraulic unit. Standard clutch cable style: Fits Twin Cam Touring models 07-13 and non-fairing Touring models 14-Up, Softail models 07-Up and Dyna Glide models 06-Up. Hydraulic clutch style: Fits Touring models 14-Up with fairings. Sold each.654198 Chrome transmission end cover clutch cable style . . . . . . . . . . . . . . . . .$198.99

654199 Black transmission end cover clutch cable style . . . . . . . . . . . . . . . . . . .$198.99

654200 Chrome transmission end cover hydraulic clutch style . . . . . . . . . . . . .$230.99

654201 Black transmission end cover hydraulic clutch style . . . . . . . . . . . . . . . .$230.99

93924

93914

http://www.cus/


10



17901

17902

25536

658444 658445

Transmission Neutral Switches25536 Fits 4-speed FL models from 59-64 and FX models with ratchet

top from late 73-early 79 as well as Evolution Big Twin 87-97 and Sportster models 86-98 (repl. OEM 33900-59C). . . . . . . .$7.99

17902 Fits 4-speed FL models with ratchet top from 65-E78 (repl. OEM 71507-65) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$15.49

17901 Fits 4-speed FX models with ratchet top from 71-E73 (repl. OEM 71507-71) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$17.99

84899 Fits 4-speed Big Twin models with ‘pancake’ top from 79-86 (repl. OEM 33901-79). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$12.99

658444 Fits 5-speed Twin Cam Softail models from 00-06 and Dyna Glide models from 01-05 and Touring models 01-06 (repl OEM 33904-00) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$11.99

658445 Fits Softail models from 98-99 and Touring and Dyna Glide models from 99-00 (repl. OEM 33902-98). . . . . . . . . . . . . . . .$12.49

Related Parts 54132 Fiber gasket for models from 36-79 (repl. OEM 25811-11). Pack

of 10. Price each.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$0.40

54130 Nylon gasket for models from 80-98 (repl. OEM 33043-80). Pack of 10. Price each.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$0.30

Speedometer Sensor Block-Off Plugs for Big TwinsBillet aluminum plug seals the transmission case when using a mechanical drive speedometer. Includes O-ring. Sold each.500435 Chrome-plated with chrome buttonhead bolt . . . . . . . . . . .$29.99

Chrome Speedo Block-Off Plug Chrome plug is used to seal the transmission when the speedo drive unit is removed. Fits 4-speed Big Twins 36-83. Includes chrome plate, gasket and screw. Sold each.500433 Block-off plug . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $5.99

Transmission Neutral Light SwitchThis neutral switch is required when using a RevTech 6-speed transmission or gear set on all models 98-99. Switch restores function of neutral indicator light.30439 Neutral light switch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$14.99

84899

Transmission Back Cover for Softail ModelsThis attractive chrome piece fills the void left by the factory between the tranny and boomerang plate on the rear of the frame. Simple two bolt installation takes only minutes.050174 Fits all Softail models from 87-99 . . . . . . . . . . . . . . . . . . . . . . .$32.99



SEATS &BAGS

FOOTCONTROLS

LIGHTING

ELECTRICAL

EXHAUST

ENGINE

GASKETS

DRIVELINE

WHEELSTIRES &BRAKES

CHASSIS

INSTRUMENTS& GAUGES

GENERAL

CROSSREFERENCE

HANDCONTROLS

SHEETMETAL


INTAKE

APPAREL

RevTech 4-Speed CaseCast from 356-T6 aluminum, this case has extra wall thickness in stressed areas and extra support webbing on the primary mounting ears. It uses 52-E79 ratchet tops, loose roller bearings and stock hardware, gears, shafts, bearings and speedometer drive gear. The main drive gear race is installed and pre-sized for standard rollers.58300 Fits 4-speed Big Twins from 65-E79 or custom applications

(chain final drive only). . . . . . . . . . . . . . . . . . . . . . . . . . . . . $306.99

Chrome Dust Shield and Shifter Lever SetsShifter lever and dust cover sets for 4-speed models. Include mounting hardware. 28155 Fits FX models from 74-E79 (repl. OEMs 34447-74, 34555-74)

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $23.99

28156 Fits FL models from 52-E79 (repl. OEMs 34447-52, 34555-52) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $23.99

28155

28156

Gear Shifter CoverReplacement gear shift cover for all Big Twin models from 52-E79.28127 Replaces OEM 34551-52 . . .$15.99

Ratchet Top AssemblyOur ratchet top unit comes chrome-plated or polished and is completely assembled. It includes a top cover gasket, sockethead mounting hardware, a vent screw and neutral switch. It features an investment-cast FL-style shift drum for forward control shift patterns. This unit will fit all 4-speed Big Twin transmissions from 52-E79.09300 Complete chrome-plated assembly (repl. OEM 34799-65)

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $323.99

09299 Complete polished assembly . . . . . . . . . . . . . . . . . . . . . . . . . $285.99

09325 Chrome ratchet top cover ONLY (repl. OEM 34803-59). . . $71.99

Replacement PartsListed in OEM part number order.09302 1/4"-20 x 11/16" screw and lockwasher (repl. OEMs 1369, 7124)

pack of 10. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $0.65

09303 10-24 x 1 5/32" screw and nut (repl. OEMs 1764W, 7620) pack of 10. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $0.80

09305 1/4"-24 x 13/16" chrome sockethead screw (repl. OEM 1766W) pack of 10. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $0.80

09308 Shifter gear spring (repl. OEM 33390-26) sold each. . . . . . . $1.49

09309 Shifter gear (repl. OEM 33960-36A) sold each. . . . . . . . . . . . $4.99

09310 Shifter cam, cast style (repl. OEM 34019-73) sold each . . . $51.99

09311 Shift cam shaft with seal (repl. OEMs 34031-41, 34036-36) sold each . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $6.99

09312 Lock screw (repl. OEM 34050-36) pack of 10 . . . . . . . . . . . . . $1.60

09313 Cam follower (repl. OEM 34062-52) sold each . . . . . . . . . . . $5.99

09314 Chrome cam follower retainer (repl. OEM 34064-52) sold each . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $9.49

09315 Cam follower washer (repl. OEM 34066-52) pack of 10 . . . $0.95

09316 Cam follower spring (repl. OEM 34068-52) pack of 10 . . . . $0.60

09317 Shift shaft bushing (repl. OEM 34435-52) sold each . . . . . $12.49

09318 Shifter shaft (repl. OEM 34453-52) sold each. . . . . . . . . . . . $12.49

09319 Shifter pawl (repl. OEM 34478-75) sold each. . . . . . . . . . . . . $7.99

09320 Shifter pawl spring (repl. OEM 34482-53) pack of 10 . . . . . $0.45

09321 Shifter pawl carrier with bushing (repl. OEMs 34488-52B, 34498-52) sold each . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $20.99

09322 Pawl carrier spring (repl. OEM 34500-52A) pack of 10 . . . . $0.70

09323 Pawl retainer (repl. OEMs 34525-54, 1608) sold each . . . . . $2.49

09324 Shifter adapter plate (repl. OEM 34560-52) sold each. . . . $19.99

09326 Chrome vent screw (repl. OEM 34720-56) pack of 10 . . . . . $2.50

310383 310384 26730

Transmission Speedometer Drive Units310383 11-teeth for FL models from 36-E61 (repl. OEM 67130-36)

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $26.99

310384 13-teeth for FL models from 62-67 (repl. OEM 67130-62) 2:1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $26.99

26730 23-teeth for FL models from 69-80, FX models from 71-72 and FXWGs from 80-83 (repl. OEM 67130-69T) 1:1 . . . . $29.99

092941 Gasket (pack of 10). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $0.40

http://www.cus/


10



Components6-SPEED

6-SPEEd660338

660342

660401



SEATS &BAGS

FOOTCONTROLS

LIGHTING

ELECTRICAL

EXHAUST

ENGINE

GASKETS

DRIVELINE

WHEELSTIRES &BRAKES

CHASSIS

INSTRUMENTS& GAUGES

GENERAL

CROSSREFERENCE

HANDCONTROLS

SHEETMETAL


INTAKE

APPAREL15015 Clutch push rod left end piece. Late

84-97 (repl. OEM 37090-84) ,21mm.$6.99

15020 Clutch push rod center piece. Late 90-05 (repl. OEM 37088-90) ,276mm.

$6.99

15021 Clutch push rod bearing kit. Late 75-Up (repl. OEM 37312-75, 37313-80 and 11066)

$7.49

25177 Chrome 5/16" flat washer. Pack of 100.

$0.34

25300 O-Ring, transmission filler plug/dip stick (repl. OEM 11132) Pack of 10

$0.20

25536 Transmission neutral switch. 59-05 (repl. OEM 33900-59)

$7.99

30400 Close-ratio first gear, mainshaft 2.94:1

$48.99

30402 RevTech second gear, mainshaft $30.9930403 RevTech third gear, mainshaft $67.9930404 RevTech fourth gear, mainshaft $67.9930405 RevTech fifth gear, mainshaft $100.9930406 RevTech sixth gear, mainshaft $71.9930408 RevTech close-ratio first gear,

countershaft 2.94:1 $71.99

30410 RevTech second gear, countershaft $67.9930411 RevTech third gear, countershaft $45.9930412 RevTechfourth gear, countershaft $27.9930413 RevTech fifth gear, countershaft $29.9930414 RevTech sixth gear, countershaft $29.9930416 RevTech slider, mainshaft $24.9930419 RevTech mainshaft $64.9930420 RevTech countershaft $41.9930421 Shifter cam $84.9930422 Shifter fork, 1-2 gears $31.9930423 Shifter fork, 4-6 gears $32.9930424 Shifter fork, 3-5 gears $33.9930427 Right support tower for shift cam $8.4930428 Snap rings. Pack of 10. Price each. $0.2530429 Snap ring (Qty. 10) $2.6030430 Split case bearings (Each) $16.4930431 Thrust washer, 1.130" I.D. x 1.35"

O.D. x .070" Thick (Qty. 10) $2.30

30432 Thrust washer, .79" I.D. x 1.35" O.D. x .074" Thick (Qty. 1)

$2.30

30433 Thrust washer, 1.00" I.D. x 1.25" O.D. x .070" Thick (Qty. 1)

$2.30

30434 Thrust washer, .868" I.E. x 1.35" O.D. x .074" Thick (Qty. 1)

$2.30

30435 Alloy key, countershaft $8.9930437 Shift cam follower $6.9930531 Bearing, mainshaft fifth gear for

models from 91-05 (repl. OEM 35051-89)

$6.99

30533 Case bearing for left side countershaft. 80-98 (repl. OEM 8977)

$11.99

30534 Case bearing for left side mainshaft. 84-98 (repl. OEM 8996)

$30.99

30535 Bearing for trapdoor main and countershaft. 80-99 (repl. OEM 8998)

$9.99

30536 Shift cam right support tower bearing. 80-99 (repl. OEM 9114)

$4.99

30537 Shift cam left support tower bearing. 80-99 (repl. OEM 9115)

$3.99

30538 Chrome transmission shift lever. 85-96 (repl. OEM 33715-85)

$17.99

32103 Chrome 1/4"-20 x 5/8" sockethead screws (pack of 10)

$1.25

32106 Chrome 1/4-20 x 1" sockethead bolt. Pack of 10.

$1.40

32111 Chrome 1/4-20 x 2 1/4" sockethead bolt. Pack of 10.

$1.60


$1.60

32139 Chrome 5/16"-24 x 1" sockethead screws (pack of 10)

$1.40

49108 Shifter linkage. For Big Twins from 74-99 (repl. OEM 11016)

$0.20

49110 Retaining ring, bearing housing (trapdoor). 80-93 (repl. OEM 11020) pack of 10

$0.30

49115 Shifter cam support. For Big Twins from 80-05 (repl. OEM 11083)

$0.25

54010 Quad seal mainshaft bearing. 84-98 (repl. OEM 11165) pack of 10

$1.00

54040 Oil seal, Fifth gear mainshaft. 91-98 (repl. OEM 12035) Pack of 10. Price each.

$2.20

54052 Oil seal, shifter shaft transmission case. 80-05 (repl. OEM 12045) pack of 5

$1.60

54130 Nylon gasket for models from 80-98 (repl. OEM 33043-80). Pack of 10. Price each.

$0.30

54248 Nylon washer, drain plug. 80-98 (repl. OEM 6007) pack of 10

$0.60

54254 Steel balll, clutch release ramps. 87-13 (repl. OEM 8873) pack of 10

$0.50

54425 Oil seal, left side mainshaft. 94-99 (repl. OEM 12067A) pack of 10

$4.70

(Note: For 85-93 models if used with CCI# 93552, 93724, 93725)

93505 Magnetic drain plug. 5-speed FLT Models 80-92 and FXR Models 82-94 (repl. OEM 722A)

$7.99

93506 Dowel pin, starter housing locating pin.89-05 (repl. OEM 337) pack of 10

$0.80

93507 Inner ramp, clutch release. 87-99 (repl. OEM 25452-87A)

$7.99

93509 Roll pin, transmission case bearing housing. 86-05 (repl. OEM 634) pack of 10

$0.30

93510 Zinc 3/4"-16 nylon insert thin hex nut. 80-05 (repl. OEM 35078-79) pack of 10

$2.00

93515 Zinc 7/16"-14 thin hex jam nut. 80-98 (repl. OEM 7515) pack of 10

$0.15

93516 Bushing, shifter shaft. 80-98 (repl. OEM 33114-79)

$6.99

93521 RevTech black wrinkle empty transmission case for FXR models 90-94 (repl. OEM 34700-89A)

$389.99

93523 RevTech black wrinkle empty transmission case. For Softail models 90-99 (repl. OEM 34732-89A)

$349.99

93525 Shifter cam. 80-93 (repl. OEM 33320-79C)

$79.99

93526 Chrome transmission top cover for all models from 87-98 except Dyna Glide models (repl. OEM 34468-86A)

$32.99

93527 Black forged aluminum bearing housing for all models from 87-98 (except FLT models 93-98) repl. OEM 35260-90B and 35258-87C

$139.99

93528 Spring plate, shift lever shaft. (repl. OEM 35068-79)

$0.99

93529 Shifter fork, first and second gear. (repl. OEM 34191-79C)

$10.99

93530 Shifter fork, third and fifth gear. (repl. OEM 34193-79C)

$12.49

93531 Shifter shaft. Big Twin models 86-00 (repl. OEM 34084-86)

$10.99

93532 Shifter fork fourth gear. (repl. OEM 34195-79C)

$11.99

93533 32 tooth transmission belt pulley. Late 94-05 (repl. OEM 40250-94) Note: For 85-93 models if used with CCI# 93552, 54425, 93725, 93724

$35.99

93534 Clutch push rod right end piece with oil slinger. 91-13 (repl. OEM 37069-90)

$13.99

93535 Outer ramp, clutch release. 87-99 (repl. OEM 25453-87A)

$4.49

93537 Chrome 1/4" flat washer with 7/16" O.D. (repl. OEM 6099) pack of 10

$0.85

93539 Thrush washer .017" thick, shift cam. (repl. OEM 32205-80) pk. of 10

$0.70

93541 Zinc 7/16" flat washer 1 1/8" O.D. (repl. OEM 6497HW) pack of 10

$0.80

93543 Chrome filler plug and dipstick. 87-05 (repl. OEM 37075-87)

$10.99

93544 Spring, shift shaft pawl. (repl. OEM 34083-79)

$4.99

93545 Shift cam follower. (repl. OEM 34085-79A)

$6.99

93546 Shifter cam pawl. (repl. OEM 34086-79)

$3.99

93548 Right side support tower, shift cam. (repl. OEM 33332-79)

$8.49

93550 Shift shaft pawl pin. (repl. 34082-79) $2.9993552 Spacer, belt pulley. Late 94-99 (repl.

OEM 33344-94) Note: For 85-93 models if used with CCI# 93533, 54425, 93725, 93724

$12.99

93553 Bottom stud. For Softail models 84-99 (repl. OEM 11733) pack of 5

$1.80

93555 Coupling, clutch release. 87-13 (repl. OEM 34920-86)

$2.99

93556 Roll pin, shift cam towers/clutch release cover 80-05 (repl. OEM 609) pack of 10

$0.30

93557 Adjusting screw, shifter shaft. (repl. OEM 33119-79B)

$8.99

93558 Spring, shifter shaft. (repl. OEM 34087-79A)

$0.95

93564 Flat end 1/2"-20x1/2" set screw, shift fork shaft. (repl. OEM 3784) pack of 10

$1.90

93575 Roll pin, shift cam follower spring pin. (repl. OEM 601) pk. of 10

$0.15

93576 Main and countershaft outer spacer. (repl. OEM 35076-79) pk. of 10

$0.70

93577 Retaining ring mainshaft case bearing. 84-10 (repl. OEM 11161) pk. of 5

$8.20

93580 Chrome fitting, top cover venting, 90°. (repl. OEM 62375-57)

$3.99

93581 Spring, shift cam follower. (repl. OEM 34089-79) pack of 10

$1.00

93582 Shift fork shaft. 87-05 (repl. OEM 34088-87)

$6.49

93584 Left side support tower, shift cam. 80-99 (repl. OEM 33326-79A)

$6.99

93618 Chrome transmission end cover. For FXR models 87-94 (repl. OEM 37109-87A)

$42.99

56259 Clutch cover retaining ring. 87-13 (repl. OEM 10998) pack of 10

$0.85

93629 Retaining ring, clutch release ramps. 87-13 (repl. OEM 10998) pack of 10

$0.80

93632 Magnetic set screw drain plug. 86-99 (repl. OEM 739A) pack of 5

$3.20

93663 Retaining ring, shift lever arm. (repl. OEM 11150) pack of 10

$0.15

93696 Zinc 1/4"-20 x 1 1/4" hex head screw (repl. OEM 3993) pack of 10

$0.30

93697 Thrust washer .020" thick, shift cam. (repl. OEM 33206-80) pk. of 10

$0.70


$0.70


$0.70


$0.70



$0.70

93724 Mainshaft sprocket pulley nut. 85-05 (repl. OEM 35211-91A)

$5.99

93725 Nut locking plate, mainshaft belt pulley. 92-05 (repl. OEM 40251-92) Note: for 85-91 models if used with CCI# 93533, 93724, 93552, 54425

$7.99

93735 Black oxide 1/4"-20 x 5/8" sockethead screw (repl. OEM 3594) pack of 10

$0.40

93757 Electronic speedometer pickup cover plate

$1.49

93759 Gasket, electronic speedometer pickup cover plate

$0.30

93795 RevTech polished transmission case. For Softail models 90-99

$349.99

93797 RevTech polished forged aluminum bearing housing (trapdoor) 87-99 (except FTL models) rpl. OEM 35250-90B

$152.99

660338Gasket, Transmission Top Cover, Silicone Bead, 86-06 FXR, Softail & Touring models

$1.20

660342Gasket, Transmission End Cover 5-Spd, 87-06 FXR, Softail & Touring, 91-05 Dyna Glide Models

$1.00

660401 Transmission bearing housing (5-speed), 84-99, Syntheseal $0.95

RevTech 6-Speed Transmission Complete BOM

All of these components are sold each unless otherwise noted.

http://www.cus/


10



Components -SPEED

-SPEEd5

5

660338

660342

660401

93537



SEATS &BAGS

FOOTCONTROLS

LIGHTING

ELECTRICAL

EXHAUST

ENGINE

GASKETS

DRIVELINE

WHEELSTIRES &BRAKES

CHASSIS

INSTRUMENTS& GAUGES

GENERAL

CROSSREFERENCE

HANDCONTROLS

SHEETMETAL


INTAKE

APPAREL15015 Clutch push rod left end piece. Late 84-97 (repl. OEM 37090-84) ,21mm.

$6.99

15020 Clutch push rod center piece. Late 90-05 (repl. OEM 37088-90) ,276mm.

$6.99

15021 Clutch push rod bearing kit. Late 75-Up (repl. OEM 37312-75, 37313-80 and 11066)

$7.49

25177 Chrome 5/16" flat washer. Pack of 100.

$0.34

25300 O-Ring, middle pushrod cover. (repl. OEM 11132) Pack of 10.

$0.20

25536 Transmission neutral switch. 59-05 (repl. OEM 33900-59)

$7.99

30508 Stock-ratio first gear, mainshaft 3.24:1 80-05 (repl. OEM 35025-79B) Price each.

$24.99

30509 Stock-ratio first gear, countershaft 3.24:1. 80-05 (repl. OEM 35622-79C)

$45.99

30510 RevTech 2.94:1 close-ratio first gear, mainshaft. 80-05 RevTech gear set

$24.99

30511 RevTech second gear, mainshaft (gear is directional)

$42.99

30512 RevTech third gear mainshaft, second gear countershaft (repl. OEM 35027-79A) Price each.

$37.99

30513 RevTech fourth gear, mainshaft. (repl. OEM 35028-79)

$37.99

30514 RevTech fifth gear, mainshaft. 91-94 (repl. OEM 35029-91)

$79.99

30515 RevTech Mainshaft for all models with second generation diaphragm clutch from 91-05 (repl. OEM 35042-91)

$68.99

30516 RevTech 2.94:1 close-ratio first gear, countershaft. 80-05 with RevTech gear set

$45.99

30517 RevTech fourth gear, countershaft. 80-05 (repl. OEM 35625-79A)

$24.99

30518 RevTech fifth gear, countershaft. 80-05 (repl. OEM 35626-79A)

$26.99

30519 RevTech countershaft. 80-05 (repl. OEM 35632-79)

$45.99

30525 RevTech Fourth gear, mainshaft 95-05 (repl. OEM 35028-94)

$39.99

30526 RevTech fourth gear, countershaft. 95-05 (repl. OEM 35625-94)

$24.99

30528 Bearing, inner race, mainshaft. 85-03 (repl. OEM 34091-85) Price each.

$15.99

30529 Split case bearing, mainshaft and countershaft. 80-05 (repl. OEM 8876A) Pack of 4. Price each.

$5.25

30531 Bearing, mainshaft fifth gear for models from 91-05 (repl. OEM 35051-89)

$6.99

30532 RevTech third gear, countershaft. 80-05 RevTech gear set (gear is directional)

$43.99

30533 Case bearing for left side countershaft. 80-98 (repl. OEM 8977)

$11.99

30534 Case bearing for left side mainshaft. 84-98 (repl. OEM 8996)

$30.99


$9.99


$4.99


$3.99


$17.99


$1.25


$1.40


$1.60


$1.60


$1.40


$0.20


$0.30

49114 Transmission gear. For Big Twins from 80-05 and Sportster models from 91-03 (repl. OEM 11067) pack 10. Price each.

$1.10


$0.25


$1.00

54040 Oil seal, Fifth gear mainshaft. 91-98 (repl. OEM 12035) Pack of 10. Price each.

$2.20


$1.60


$0.30


$0.60

54254 Steel balll, clutch release ramps. 87-13 (repl. OEM 8873) pack of 10

$0.50

54425 Oil seal, left side mainshaft. 94-99 (repl. OEM 12067A) pack of 10

$4.70

56247 Spacer, countershaft. 80-05 (repl. OEM 35629-86) pack of 10. Price each.

$2.99

56248 Spacer, mainshaft. 80-05 (repl. OEM 35064-79)

$2.99

56258 Thrust washers. 80-05 (repl. OEM 6003) Pack of 5. Price each.

$1.60

92317 RevTech Mainshaft with kicker for all models with second generation diaphragm clutch from 91-05

$99.99

93505 Magnetic drain plug. 5-speed FLT Models 80-92 and FXR Models 82-94 (repl. OEM 722A)

$7.99


$0.80

93507 Inner ramp, clutch release. 87-99 (repl. OEM 25452-87A)

$7.99


$0.30


$2.00


$0.15


$6.99

93521 RevTech black wrinkle empty transmission case for FXR models 90-94 (repl. OEM 34700-89A)

$389.99

93523 RevTech black wrinkle empty transmission case. For Softail models 90-99 (repl. OEM 34732-89A)

$349.99

93680 Chrome end cover for all Big Twin models (except FXR) from 87-05 (repl. OEM 37105-99)

$45.99


$79.99


$32.99

93527 Black forged aluminum bearing housing for all models from 87-98 (except FLT models 93-98) repl. OEM 35260-90B and 35258-87C

$139.99


$0.99


$10.99


$12.49


$10.99


$11.99

93533 32 tooth transmission belt pulley. Late 94-05 (repl. OEM 40250-94) Note: For 85-93 models if used with CCI# 93552, 54425, 93725, 93724

$35.99

93534 Clutch push rod right end piece with oil slinger. 91-13 (repl. OEM 37069-90)

$13.99

93535 Outer ramp, clutch release. 87-99 (repl. OEM 25453-87A)

$4.49


$0.85


$0.70


$0.80

93543 Chrome filler plug and dipstick. 87-05 (repl. OEM 37075-87)

$10.99


$4.99


$6.99


$3.99


$8.49

93550 Shift shaft pawl pin. (repl. 34082-79)

$2.99

93552 Spacer, belt pulley. Late 94-99 (repl. OEM 33344-94) Note: For 85-93 models if used with CCI# 93533, 54425, 93725, 93724

$12.99

93553 Bottom stud. For Softail models 84-99 (repl. OEM 11733) pack of 5

$1.80

93555 Coupling, clutch release. 87-13 (repl. OEM 34920-86)

$2.99


$0.30


$8.99


$0.95


$1.90


$0.15


$0.70

93577 Retaining ring mainshaft case bearing. 84-10 (repl. OEM 11161) pk. of 5

$8.20


$3.99


$1.00

93582 Shift fork shaft. 87-05 (repl. OEM 34088-87)

$6.49


$6.99

93618 Chrome transmission end cover. For FXR models 87-94 (repl. OEM 37109-87A)

$42.99

93681 Chrome end cover for all FXR models from 87-00 (repl. OEM 37109-87)

$39.99

56259 Clutch cover retaining ring. 87-13 (repl. OEM 10998) pack of 10

$0.85

93629 Retaining ring, clutch release ramps. 87-13 (repl. OEM 10998) pack of 10

$0.80

93632 Magnetic set screw drain plug. 86-99 (repl. OEM 739A) pack of 5

$3.20


$0.15

93696 Zinc 1/4"-20 x 1 1/4" hex head screw (repl. OEM 3993) pack of 10

$0.30


$0.70


$0.70


$0.70


$0.70


$1.30


$0.70

93724 Mainshaft sprocket pulley nut. 85-05 (repl. OEM 35211-91A)

$5.99

93725 Nut locking plate, mainshaft belt pulley. 92-05 (repl. OEM 40251-92) Note: for 85-91 models if used with CCI# 93533, 93724, 93552, 54425

$7.99

93735 Black oxide 1/4"-20 x 5/8" sockethead screw (repl. OEM 3594) pack of 10

$0.40

93757 Electronic speedometer pickup cover plate

$1.49

93759 Gasket, electronic speedometer pickup cover plate

$0.30

93795 RevTech polished transmission case. For Softail models 90-99

$349.99

93797 RevTech polished forged aluminum bearing housing (trapdoor) 87-99 (except FTL models) rpl. OEM 35250-90B

$152.99

660338Gasket, Transmission Top Cover, Silicone Bead, 86-06 FXR, Softail & Touring models

$1.20

660342Gasket, Transmission End Cover 5-Spd, 87-06 FXR, Softail & Touring, 91-05 Dyna Glide Models

$1.00

660401 Transmission bearing housing (5-speed), 84-99, Syntheseal $0.95

(Note: For 85-93 models if used with CCI# 93552, 93724, 93725)


http://www.cus/


10



5/4-SPEED

Components5 IN 4-SPEED

660338

660381

93537



SEATS &BAGS

FOOTCONTROLS

LIGHTING

ELECTRICAL

EXHAUST

ENGINE

GASKETS

DRIVELINE

WHEELSTIRES &BRAKES

CHASSIS

INSTRUMENTS& GAUGES

GENERAL

CROSSREFERENCE

HANDCONTROLS

SHEETMETAL


INTAKE

APPAREL14610 Chrome 5/16"-18 acorn nut (pack

of 10)$1.20

15010 Center Piece (repl. OEM 37088-79) , 10.20”

$9.99

15011 Right End (repl. OEM 37089-79) , 1.90”

$3.99

15012 Left End (repl.OEM 37090-79), 1.57”

$3.99

15021 Clutch pushrod bearing kit (repl. OEMs 37312-75, 37313-80, 11066)

$7.49

18370 Transmission chain sprocket, 23 tooth (repl. OEM 33336-83)

$14.99

25174 Chrome 5/16" spiral lock washer (pack of 100)

$0.34

32813 Chrome 5/16" AN flat washer. Pack of 50.

$1.04

25374 Bottom studs (repl. OEM 34724-36) pack of 4

$5.75

25382 Studs, transmission case to inner primary (repl. OEM 16830-54) pack of 4

$4.62

25536 Transmission neutral switch (repl. OEM 33900-59)

$7.99

25949 Clutch release cover (repl. OEM 37081-80)

$52.99

30510 RevTech 2.94:1 close-ratio first gear, mainshaft. 80-05 RevTech gear set

$24.99

30511 RevTech second gear, mainshaft (gear is directional)

$42.99

30512 RevTech third gear mainshaft, second gear countershaft (repl. OEM 35027-79A) Price each.

$37.99

30513 RevTech fourth gear, mainshaft. (repl. OEM 35028-79)

$37.99

30516 RevTech 2.94:1 close-ratio first gear, countershaft. 80-05 with RevTech gear set

$45.99

30517 RevTech fourth gear, countershaft. 80-05 (repl. OEM 35625-79A)

$24.99

30518 RevTech fifth gear, countershaft. 80-05 (repl. OEM 35626-79A)

$26.99

30520 Fifth gear, mainshaft for all models with dry clutch from 80-E84 (repl. OEM 35029-79)

$78.99

30529 Split case bearing, mainshaft and countershaft. 80-05 (repl. OEM 8876A) Pack of 4. Price each.

$5.25

30530 Bearing, mainshaft fifth gear for models from 80-90 (repl. OEM 8904) Price each.

$8.49

30532 RevTech third gear, countershaft. 80-05 RevTech gear set (gear is directional)

$43.99


$9.99


$4.99


$3.99


$17.99

30539 Bearing, mainshaft case (repl. OEM 8978)

$26.99

30540 Retaining ring, mainshaft case bearing (repl. OEM 11057) pack of 10

$2.80

30541 Sprocket spacer (repl. OEM 33334-79)

$14.49

30542 Bearing, countershaft, left-side case

$10.99


$1.25


$1.40


$1.60


$1.60


$1.40

32309 Chrome 1/4"-20 x 3/4" buttonhead screws (pack of 10)

$1.80


$0.20

49109 Fits clutch release lever stud on 80-86 Big Twins and detent plate on Sportster models from 91-13 (repl. OEM 11019)

$0.30


$0.30

49114 Transmission gear. For Big Twins from 80-05 and Sportster models from 91-03 (repl. OEM 11067) pack 10. Price each.

$1.10


$0.25


$1.00

54046 Oil seal, fifth gear mainshaft (repl. OEM 12013A) Pack of 10. Price each.

$1.25

54049 Oil seal, left side mainshaft (repl. OEM 12044A) pack of 10

$2.60


$1.60

54066 Clutch release shaft oil seal (repl. OEM 37101-84)

$3.49


$0.30


$0.60

54381 O-Ring, 5-speed transmission filler plug/dip stick (repl. OEM 37091-84) pack of 10

$1.58

56247 Spacer, countershaft. 80-05 (repl. OEM 35629-86) pack of 10. Price each.

$2.99

56248 Spacer, mainshaft. 80-05 (repl. OEM 35064-79)

$2.99

56258 Thrust washers. 80-05 (repl. OEM 6003) Pack of 5. Price each.

$1.60

93502 Clutch release arm $24.9993503 RevTech mainshaft (not for kicker) $66.9993504 RevTech countershaft $45.9993505 Magnetic drain plug. 5-speed FLT

Models 80-92 and FXR Models 82-94 (repl. OEM 722A)

$7.99


$0.80

93508 Mainshaft sprocket nut (repl. OEM 35211)

$5.99


$0.30


$2.00


$0.15


$6.99

93522 RevTech 4/5-speed polished transmission case

$299.99


$79.99


$32.99


$0.99


$10.99


$12.49


$10.99


$11.99


$0.85


$0.70


$0.80


$4.99


$6.99


$3.99


$8.49

93550 Shift shaft pawl pin. (repl. 34082-79)

$2.99


$0.30


$8.99


$0.95


$1.90


$0.15


$0.70


$3.99


$1.00


$6.99

93590 RevTech polished forged aluminum bearing housing (trapdoor)

$144.99

93591 Shift fork shaft $5.4993608 Chrome spacer .312" x .62" x

.455" (pack of 5)$3.40

93609 Chrome spacer .312" x .62" x .770" (pack of 5)

$3.40

93616 Zinc spacer washer .375" x .80" x.188" (pack of 5)

$3.40

93617 Chrome spacer .312" x .62" x .580" (pack of 5)

$3.40

93619 Clutch release finger (repl. OEM 37084-79)

$7.99

93620 Clutch release shaft (repl. OEM 37083-80A)

$9.99

93625 Support plate assembly $5.4993634 Black oxide 10-24 x 3/8"

sockethead screws (repl. OEM 857A) pack of 10

$0.30

93662 Chrome filler plug (repl. OEM 37072-79)

$4.49


$0.15

93690 Bushing, clutch release shaft (repl. OEM 37102-84)

$3.99

93691 Spacer washer, clutch release arm $2.4993696 Zinc 1/4"-20 x 1 1/4" hex head

screw (repl. OEM 3993) pack of 10$0.30


$0.70


$0.70


$0.70


$0.70


$1.30


$0.70

93741 Black oxide 5/16"-18 x 3/4" flathead screws (pack of 10)

$0.55

93806 Chrome shift linkage arm for FXE models

$26.49

93870 RevTech 4/5 speed mainshaft with kicker. 70-E84

$99.99

93894 Clutch release arm for kicker $31.99

660381 Transmission end cover (5-speed), 84-86, Syntheseal

$0.95

660342 Gasket, Transmission End Cover 5-Spd, 87-06 FXR, Softail & Touring, 91-05 Dyna Glide Models

$1.00

660401 Transmission bearing housing (5-speed), 84-99, Syntheseal

$0.95


http://www.cus/


10



2528625381

2625756309

26073

25394

26272

2621126803

26258

150781507915080

26258

26210

5628556297562985629956300

56301

26206

56310

56311thru

56314

56315thru

56318

49064thru

49067

56273

25376

25320

20096

2528525380 17126

17128 58300

56319

26452

2620726208

2545025451

2530954046

54017

25375253772537825379

251032532354069

12225

See Driveline Section

25396

12219

25287

26259

56277thru

56284

26209

56305

56270

26800

56303

56286

26213

56304

25402

56302

56272

19487

26806

2621226439

25402

56271

1938326076

25389

Components4-SPEED



SEATS &BAGS

FOOTCONTROLS

LIGHTING

ELECTRICAL

EXHAUST

ENGINE

GASKETS

DRIVELINE

WHEELSTIRES &BRAKES

CHASSIS

INSTRUMENTS& GAUGES

GENERAL

CROSSREFERENCE

HANDCONTROLS

SHEETMETAL


INTAKE

APPAREL

Shift Lever BushingsIf you’re riding a late 79-86 4-speed FL or FX model, then you’ve probably got a sloppy gear shifter linkage that can be traced to this part or the aluminum shifter arm. Ream your aluminum shifter lever to accept this oversize bushing and restore that ‘good as new’ feel.20140 Standard size (repl. OEM 33187-79)

pack of 5 . . . . . . . . . . . . . . . . . . . . . $2.60

20141 .020" oversize (pack of 5) . . . . . . $2.60

12219 Locknut, countershaft sprocket (repl. OEM 35211-36) pack of 10

$3.80

12225 Spacer, sprocket (repl. OEM 35079-80) pack of 5

$2.60

15078 Mainshaft, late 37-64 (11 3/4"-long) repl. OEM 35040-50T)

$45.99

15079 Mainshaft, 65-69 (12"-long) repl. OEM 35039-65T

$45.99

15080 Mainshaft, 70-E84 (12 1/2"-long) repl. OEMs 35039-80T, 35039-70A)

$49.99

19383 Countershaft, imported, 37-E76 (repl. OEM 35614-65T)

$9.99

19487 O-ring, 65-86 (repl. OEM 11115) pack of 10

$0.30

20016 JIMS countershaft, U.S. made, 37-E76 (repl. OEM 35614-65)

$37.99

20021 JIMS race, late 37-E77 (repl. OEM 35125-37)

$72.99

20046 JIMS race, +.005", late 37-E77 $71.99

20096 Key, main drive gear spacer, 38-E77 (repl. OEM 35175-38) pack of 10

$0.95

20678 JIMS transmission main drive gear bushing 36-86 (repl. OEM 35094-65)

$24.99

20680 JIMS countershaft 76-79 (repl. OEM 35614-76)

$37.99

20681 JIMS countershaft low and reverse gear bushing 36-84 (repl. OEM 35789-36)

$22.99

20682 JIMS countershaft low/second gear bushing 40-84 (repl. OEM 35791-36)

$22.99

20715 JIMS countershaft for Big Twins from 80-86 (repl OEM 35614-80)

$37.99

20723 JIMS race, +.010", late 37-E77 $70.99

25103 Seal, 37-E79 (repl. OEM 35230-39)

$2.49

25285 Bumper plate with screws, 36-E78 (repl. OEM 33353-36)

$1.99

25286 Oil deflector, 40-79 (repl. OEM 33429-39)

$1.49

25287 Nut, crank gear, 37-79 (repl. OEM 7911)

$2.49

25309 Seal, main drive gear, late 66-E81 (repl. OEM 12022) pack of 10

$1.15

25320 Cork washer, mainshaft, 37-early 77 (repl. OEM 35231-36) pack of 10

$1.00

25323 Seal, late 79-81 (repl. OEM 37741-67) pack of 5

$1.60

25375 Spacer, 80-81 (repl. OEM 35070-80)

$10.99

25376 Spacer, 37-E77 (repl. OEM 35171-37)

$11.99

25377 Spacer, late 77-79 models (repl. OEM 35070-77)

$11.99

25378 Spacer, main drive gear, chain drive, 82-85 (repl. OEMs 35079-82A, 35079-84)

$14.99

25379 Spacer, main drive gear, belt drive, 82-86 (repl. OEMs 35070-82A, 35070-84)

$14.99

25380 Bumper plate with screws, late 78-80 (repl. OEM 33353-78) pack of 5

$1.80

25381 Oil deflector with screws, 80-84 (repl. OEM 33429-80) pack of 5

$1.40

25389 Locktab, 37-79 (repl. OEM 33082-16) pack of 10

$0.40


$0.40


$0.45

25402 Needle bearing, late 76-86 (repl. OEM 35961-52)

$10.49

25450 Needle bearing, late 77-81 (repl. OEM 8905)

$19.99

25451 Needle bearing, 82-86 (repl. OEM 8906)

$74.99

26073 Nut, mainshaft, 37-86 (repl. OEM 35046-36)

$3.99

26076 Countershaft, imported, late 76-79 (repl. OEM 35614-76T)

$13.99

26206 Shifter clutch, mainshaft, late 38-86 (repl. OEM 35440-38T)

$12.99

26207 Main drive gear, late 38-E77 (repl. OEM 35065-65TB) 26 tooth with bearings

$57.99

26208 Main drive gear, late 77-E84 (repl. OEM 35067-77A) 26 tooth

$57.99

26209 Low gear, countershaft, 74-86 (repl. OEM 35717-74T) 24 tooth

$24.99

26210 Third gear, mainshaft, 59-86 (repl. OEM 35306-59T) 24 tooth

$24.99

26211 Low and second gear, mainshaft, 74-79 (repl. OEM 35282-74T) 17 x 20 tooth

$30.99

26212 Gear, countershaft, late 76-83 (caged roller style) 15 x 17 tooth (repl. OEMs 35716-76T, 35699-76)

$68.99

26213 Second gear, countershaft, 40-84 FL; 71-79 FX (repl. OEM 35751-36T) 21 tooth

$23.99

26257 Retaining plate, 80-86 (repl. OEM 35111-80)

$14.99

26258 Bushing, mainshaft (repl. OEM 37436-36) pack of 5

$1.80

26259 End plate, 39-79 (repl. OEM 35630-36) pack of 5

$2.40

26272 Mainshaft bearing housing, 36-79 (repl. OEM 35100-36)

$37.99

26439 Gear, countershaft, 69-E76 (loose roller style) 15 x 17 tooth (repl. OEMs 35713-36T, 35700-69)

$78.99

26452 Bushing, 65-86 (repl. OEM 35094-65)

$4.99

26800 Shifter clutch, countershaft, 40-86 (repl. OEM 35665-36TA)

$12.99

26803 Low and second gear, mainshaft, 59-84 (repl. OEM 35282-59) 15 x 20 tooth

$38.99

26806 Gear, speedometer, 69-83 (repl. OEM 35635-69T)

$12.99

54017 O-ring, late 84-86 (repl. OEM 11166) pack of 10

$0.30

54046 Seal, main drive gear, 65-E66 and late 81-86 (repl. OEM 12013A) Pack of 10. Price each.

$1.25

54069 Seal, mainshaft, 82-86 (repl. OEM 37741-82)

$2.99

56270 Thrust washer. Fits low and reverse gears from 36-86 (repl. OEM 35812-36) pack of 10

$5.60

56271 Retaining washer. Fits the countershaft bearing (outer) from 36-86 (repl. OEM 35915-36) pack of 10

$3.80

56272 Washer (repl. OEM 35917-36) pack of 10

$3.80

56273 Retaining washer. Fits the 4th gear roller bearings from 36-E77 (repl. OEM 35131-36) sold each

$7.49

56277 Set of seven different thickness countershaft thrust washers (repl. OEM 35875-36)

$21.99

56278 Washer .074" (repl. OEM 35876-36) pack of 5

$4.00


$4.00


$4.00


$4.00


$4.00


$4.00


$4.00

56285 Mainshaft washer-standard (repl. OEM 35365-36)

$5.99

56286 Washer, countershaft (repl. OEM 35811-36)

$5.99

56297 Washer, mainshaft (-.005") $6.99

56298 Washer, mainshaft (+.005") $6.99



56301 Mainshaft 2nd/3rd gear. For 37-86 Big Twins (repl. OEM 35337-36)

$1.20

56302 Countershaft bearing. For 37-E76 Big Twins (repl. OEM 35920-36)

$1.40

56303 Low and second gear. For 40-86 Big Twins (repl. OEM 35810-36)

$0.95

56304 Bushing, countershaft gear (repl. OEM 35791-36)

$5.49

56305 Bushing, countershaft gear (repl. OEM 35789-36)

$5.49

56309 Retaining plate, bearing housing, 37-79 (repl. OEM 35111-36)

$15.99

56310 Bushing (handshift), mainshaft, 38-79 (repl. OEM 35322-38)

$18.99

56311 Bushing, countershaft, starter side 37-early 76 (repl. OEM 36046-36)

$11.99

56312 Bushing, (+.005") countershaft, starter side 37-E76

$11.99

56313 Bushing, countershaft, starter side late 76-79 (repl. OEM 36045-76)

$11.99

56314 Bushing, (+.005") countershaft, starter side late 76-79

$11.99

56315 Bushing, countershaft, clutch side 37-E76 (repl. OEM 36048-36)

$11.99

56316 Bushing, (+.005") countershaft, clutch side 37-76

$11.99

56317 Bushing, countershaft, clutch side, late 76-86; starter side, 80-86 (repl. OEM 36048-76A)

$11.99

56318 Bushing, (+.005") countershaft, clutch side late 76-86; starter side, 80-86

$11.99

56319 Drive gear bearing race. For 37-E77 Big Twins (repl. OEM 35129-36)

$1.40


http://www.cus/


10



ComponentsSportstertransmission

2532225323 25321

54076

25402

12083

2530356320

24244

30900

56355

25402

25453

30901

56338

56339thru56342

56343thru56354

56360thru56365

49063

56336

56337

25401

See Driveline Section

2531754053

25318

25391

3090230903

2424524246

24242

2423624237239502001020043

24217

2424824219

24241

24247

24243

24218



SEATS &BAGS

FOOTCONTROLS

LIGHTING

ELECTRICAL

EXHAUST

ENGINE

GASKETS

DRIVELINE

WHEELSTIRES &BRAKES

CHASSIS

INSTRUMENTS& GAUGES

GENERAL

CROSSREFERENCE

HANDCONTROLS

SHEETMETAL


INTAKE

APPAREL

Transmission Parts for Sportster and K Models from 52-9012083 O-ring, clutch gear for late 57-66 XLH, XLCH, and 67-69 XLCH (repl. OEM

11103) Pack of 10. Price each. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $0.40

20010 JIMS Race, mainshaft, 54-83 (repl. OEM 35105-52) . . . . . . . . . . . . . . . . . . . $52.99

20043 JIMS Race, mainshaft, +.005", 54-83 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $52.99

25303 O-ring, clutch gear for 67-70 XLH and 70 XLCH (repl. OEM 11119) Pack of 10. Price each.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $0.45

25317 Oil seal, mainshaft, 54-E84 (repl. OEM 35151-52A) Pack of 10. Price each. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $1.50

25318 Gasket, mainshaft oil seal, 54-E84 (repl. OEM 35169-52) Pack of 10. Price each. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $0.50

25321 Oil seal, clutch gear for 56-66 XLH, XLCH, and 67-69 XLCH (repl. OEM 37531-56B) Pack of 5. Price each. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $1.00

25322 Oil seal, clutch shell for late 57-66 XLH, XLCH, and 67-69 XLCH (repl. OEM 37740-57) Pack of 5. Price each. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $1.20

25323 Oil seal, clutch hub for 67-70 XLH; 70 XLCH (repl. OEM 37741-67) Pack of 5. Price each.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $1.60

25391 Locktab, mainshaft, 54-85 (repl. OEM 35050-52) Pack of 10. Price each.. . . $0.40

25401 Needle bearing, closed end, 54-90 (repl. OEM 35960-54). . . . . . . . . . . . . . $13.99

25402 Needle bearing, open end, 54-90 (repl. OEM 35961-52). . . . . . . . . . . . . . . $10.49

25453 Bearing, mainshaft, 54-90 (repl. OEM 9025A) . . . . . . . . . . . . . . . . . . . . . . . . $12.99

30900 Washer, mainshaft third gear, 56-85 (repl. OEM 35364-56) Pack of 5. Price each. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $3.60

30901 Spacer, countershaft gear, 58-90 (repl. OEM 35809-58) Pack of 5. Price each. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $4.00

30902 Nut with seal, mainshaft, 54-70 (repl. OEM 35047-53) . . . . . . . . . . . . . . . . . . . $12.99

30903 Nut, mainshaft, 71-E84 (repl. OEM 35047-71A). . . . . . . . . . . . . . . . . . . . . . . . $5.49

49063 Rollers, +.0008" (repl. OEM 9097) Pack of 100. Price each. . . . . . . . . . . . . . $0.18

54053 Oil seal, mainshaft, late 84-90 (repl. OEM 12049) Pack of 10. Price each. . . $1.15

56320 Retaining ring, mainshaft third gear, 56-90 Sportster and K models (repl. OEM 35337-56) Pack of 10. Price each. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $1.00

Thrust Washers, Countershaft Low Gear - Right, 54-85Sold in packs of 5.56343 .020"-thick (repl. OEM 35818-72) . . . . . . . . .$2.60

56344 .025"-thick (repl. OEM 35327-73) . . . . . . . . .$2.60

56345 .030"-thick (repl. OEM 35819-72) . . . . . . . . .$2.60

56346 .035"-thick (repl. OEM 35328-73) . . . . . . . . .$2.60

56347 .040"-thick (repl. OEM 35821-72) . . . . . . . . .$2.60

56348 .045"-thick (repl. OEM 35329-73) . . . . . . . . .$2.60

56349 .050"-thick (repl. OEM 35820-52) . . . . . . . . .$2.60

56350 .055"-thick (repl. OEM 35821-52) . . . . . . . . .$2.60

56351 .060"-thick (repl. OEM 35824-52) . . . . . . . . .$2.60

56352 .065"-thick (repl. OEM 35825-52) . . . . . . . . .$2.60

56353 .070"-thick (repl. OEM 35828-52) . . . . . . . . .$2.60

56354 .075"-thick (repl. OEM 35829-52) . . . . . . . . .$2.60

56355 Retaining ring, mainshaft ball bearing, 54-E84 (repl. OEM 35112-52) pack of 10. . . . . . . . . .$1.35

Thrust Washers, Mainshaft-Right, 54-E84Sold in packs of 5.56321 .030"-thick (repl. OEM 35343-73) . . . . . . . . .$2.60

56322 .040"-thick (repl. OEM 35344-73) . . . . . . . . .$2.60

56323 .050"-thick (repl. OEM 35349-52) . . . . . . . . .$2.60

56324 .055"-thick (repl. OEM 35350-52) . . . . . . . . .$2.60

56325 .060"-thick (repl. OEM 35351-52) . . . . . . . . .$2.60

56326 .065"-thick (repl. OEM 35352-52) . . . . . . . . .$2.60

56327 .070"-thick (repl. OEM 35353-52) . . . . . . . . .$2.60

56328 .075"-thick (repl. OEM 35354-52) . . . . . . . . .$2.60

56329 .080"-thick (repl. OEM 35326-73) . . . . . . . . .$2.60

56330 .085"-thick (repl. OEM 35355-72) . . . . . . . . .$2.60

56331 .090"-thick . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$2.60

56332 .098"-thick (repl. OEM 35357-82) . . . . . . . . .$2.00

56333 .107"-thick (repl. OEM 35358-82) . . . . . . . . .$2.00

56334 .116"-thick (repl. OEM 35359-82) . . . . . . . . .$2.00

56335 .125"-thick (repl. OEM 35360-82) . . . . . . . . .$2.00

56336 Washer, mainshaft roller bearing, 54-E84 (repl. OEM 35363-52) pack of 5 . . . . . . . . . . . . . . . .$2.80

56337 Retaining ring, mainshaft roller bearings, 54-E84 (repl. OEM 35113-52) pack of 10. . .$1.20

56338 Thrust washer, second gear, 58-90 (repl. OEM 35841-58) pack of 5 . . . . . . . . . . . . . . . . . . . . .$2.60

Thrust Washers, Countershaft Low Gear-Left, 55-E84Sold in packs of 5.56339 .065"-thick (repl. OEM 35840-52) . . . . . . . . .$2.60

56340 .075"-thick (repl. OEM 35836-55) . . . . . . . . .$2.60

56341 .085"-thick (repl. OEM 35838-55) . . . . . . . . .$2.60

56342 .100"-thick (repl. OEM 35839-55) . . . . . . . . .$2.60

Thrust Washers, Mainshaft-Right, Late 84-90Sold in packs of 5.56360 .0675"-thick (repl. OEM 35385-84) . . . . . . . .$5.00

56361 .0725"-thick (repl. OEM 35384-84) . . . . . . . .$5.00

56362 .0795"-thick (repl. OEM 35383-84) . . . . . . . .$5.00

56363 .0845"-thick (repl. OEM 35382-84) . . . . . . . .$5.00

56364 .0905"-thick (repl. OEM 35381-84) . . . . . . . .$5.00

56365 .0965"-thick (repl. OEM 35380-84) . . . . . . . .$5.00

Andrews Gears for 4-Speed Sportster ModelsStock-ratio gears for Sportster and K models.24218 Low gear, countershaft, 73-E84 (repl. OEM 35760-73) 17 tooth. Will fit late

84-90 if early countershaft (OEM 35613-58) is used. . . . . . . . . . . . . . . . . . . $94.99

24217 Low gear, mainshaft, 54-90 (repl. OEM 35277-52A) 27-tooth . . . . . . . . . . $69.99

24241 Second gear, countershaft, 58-90 (repl. OEM 35750-58A) 20-tooth. . . . . $89.99

24242 Second gear, mainshaft, 56-90 (repl. OEM 35296-56A) 23-tooth . . . . . . . $90.99

24243 Third gear, countershaft, 54-90 (repl. OEM 35709-54B) 23-tooth. . . . . . . $90.99

24244 Third gear, mainshaft, 56-90 (repl. OEM 35305-56A) 20-tooth . . . . . . . . . $89.99

24245 Clutch gear, mainshaft, 71-E79 (repl. OEM 37448-71) 17-tooth . . . . . . . $206.99

24246 Clutch gear, mainshaft, late 79-E84 (repl. OEM 37448-79) 17-tooth . . . $206.99

24248 Drive gear, countershaft, 58-86 (repl. OEM 35695-58) 27-tooth . . . . . . . . $67.99

24219 Drive gear, countershaft, 87-90 (repl. OEM 35695-87) 26-tooth . . . . . . . . $68.49

Mainshafts and Countershafts for Sportster and K Models24236 Mainshaft, 56-69 kickstart (repl. OEM 35044-56) . . . . . . . . . . . . . . . . . . . . $239.99

24237 Mainshaft, 71-E84 (repl. OEM 35046-71A) . . . . . . . . . . . . . . . . . . . . . . . . . . $186.99

23950 Mainshaft, late 84-90 (repl. OEM 35036-84A) . . . . . . . . . . . . . . . . . . . . . . . $186.99

24247 Countershaft, 58-E84 (repl. OEM 35613-58). . . . . . . . . . . . . . . . . . . . . . . . . . $96.99

All parts are sold each unless otherwise indicated.

http://www.cus/


10



Andrews Gears for 5-Speed Sportster Models23969 Complete close-ratio kit. Includes 1st thru 5th gears, mainshaft

and countershaft . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $1,081.99

23960 2.61:1 ratio 1st gear set (includes main and countershaft 1st gears). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $171.99

Stock-Ratio Replacement Gears (NOT for 94- HDI)Andrews quality in precision replacement gears for all Sportster and Buell models from 91-0323961 2nd mainshaft/3rd countershaft (repl. OEM 35771-89). . . $80.99

23962 3rd mainshaft/2nd countershaft (repl. OEM 35772-89). . . $80.99

23963 4th gear, mainshaft (repl. OEM 35773-89) . . . . . . . . . . . . . . $80.99

23964 4th gear, countershaft (repl. OEM 35775-89). . . . . . . . . . . . $45.99

23965 Main drive gear (repl. OEM 35034-89) . . . . . . . . . . . . . . . . $182.99

23966 5th gear, countershaft (repl. OEM 35633-89). . . . . . . . . . . . $45.99

Transmission Shafts23968 Mainshaft (repl. OEM 35640-89). . . . . . . . . . . . . . . . . . . . . . $195.99

Andrews Gears for 4-Speed Sportster ModelsClose-Ratio Main Gear SetsTighten the gap between all four gears. Recommended for racers to minimize breakage problems. Includes countershaft drive gear and mainshaftclutch gear.24238 Late 84-86 (stock replacement on models from 87-90) . . $295.99

24239 79-early 84 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $295.99

24240 71-78 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $295.99

Individual Gears for Sportster and K ModelsStock-ratio gears for Sportster and K models.24218 Low gear, countershaft, 73-E84 (repl. OEM 35760-73) 17 tooth.

Will fit late 84-90 if early countershaft (OEM 35613-58) is used . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $94.99

24217 Low gear, mainshaft, 54-90 (repl. OEM 35277-52A) 27-tooth . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $69.99

24241 Second gear, countershaft, 58-90 (repl. OEM 35750-58A) 20-tooth . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $89.99

24242 Second gear, mainshaft, 56-90 (repl. OEM 35296-56A) 23-tooth . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $90.99

24243 Third gear, countershaft, 54-90 (repl. OEM 35709-54B) 23-tooth . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $90.99

24244 Third gear, mainshaft, 56-90 (repl. OEM 35305-56A) 20-tooth . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $89.99

24245 Clutch gear, mainshaft, 71-E79 (repl. OEM 37448-71) 17-tooth . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $206.99

24246 Clutch gear, mainshaft, late 79-E84 (repl. OEM 37448-79) 17-tooth . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $206.99

24248 Drive gear, countershaft, 58-86 (repl. OEM 35695-58) 27-tooth . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $67.99

24219 Drive gear, countershaft, 87-90 (repl. OEM 35695-87) 26-tooth . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $68.49

Mainshafts and Countershafts for Sportster and K Models24236 Mainshaft, 56-69 kickstart (repl. OEM 35044-56) . . . . . . . $239.99

24237 Mainshaft, 71-E84 (repl. OEM 35046-71A) . . . . . . . . . . . . . $186.99

23950 Mainshaft, late 84-90 (repl. OEM 35036-84A) . . . . . . . . . . $186.99

24247 Countershaft, 58-E84 (repl. OEM 35613-58). . . . . . . . . . . . . $96.99



SEATS &BAGS

FOOTCONTROLS

LIGHTING

ELECTRICAL

EXHAUST

ENGINE

GASKETS

DRIVELINE

WHEELSTIRES &BRAKES

CHASSIS

INSTRUMENTS& GAUGES

GENERAL

CROSSREFERENCE

HANDCONTROLS

SHEETMETAL


INTAKE

APPAREL

Mainshaft Drive Gear SpacersFor 4-speed Big Twin models from 38-86.25375 Fit 80-81 (repl. OEM 35070-80).

Use with OEM 37741-67 oil seal (CC #25323) and OEM 8905 needle bearing (CC #25450) . . . . . . . . $10.99

25376 Fit 38-E77 (repl. OEM 35171-37). Use with OEM 35175-38 locking key (CC #20096) . . . . . . . . . . . . . . . . .$11.99

25377 Spacer, late 77-79 models (repl. OEM 35070-77) . . . . . . . . . . . . . .$11.99

25378 Spacer, main drive gear, chain drive, 82-85 (repl. OEMs 35079-82A, 35079-84) . . . . . . . . . . . . . $14.99

25379 Spacer, main drive gear, belt drive, 82-86 (repl. OEMs 35070-82A, 35070-84) . . . . . . . . . . . . . . . . . . $14.99

Shifter Fork ShaftsAmerican-made shafts for 4-speed Big Twins from 36-86. Sold each.20017 Fits 36-E76 models (repl. OEM 34140-36) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $9.49

20067 Fits late 76-86 models (repl. OEM 34186-76) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $13.99

20017

20067

20126

2012720125

Shifter ForksFit the 4-speed transmissions in all Big Twin models from 36-86.19347 Mainshaft fork (3rd-4th) repl. OEM

34158-36T . . . . . . . . . . . . . . . . . . . .$7.99

19348 Countershaft fork (1st-2nd) repl. OEM 34159-36T. . . . . . . . . . . . . . .$7.99

19347

19348

Andrews Shifter ForksThese severe-service shifter forks are cold-forged, fully heat-treated and then given a black oxide finish. They fit all 4-speed Big Twins from 36-86. Sold each.24205 Countershaft fork (1st-2nd) repl.

OEM 34159-36. . . . . . . . . . . . . . .$12.99

24206 Mainshaft fork (3rd-4th) repl. OEM 34158-36 . . . . . . . . . . . . . . . . . . . .$12.99

2420524206

19351

Shifter Finger Parts for 4-Speed ModelsHigh-quality American-made shift fork parts meet or exceed OEM specifications.19351 Shift finger rollers for Big Twins

from 41-E79 (repl. OEM 34168-39) pack of 10. . . . . . . . . . . . . . . . . $1.20

20125 Shifter finger for all 4-speed Big Twins from 36-E76 (repl. OEM 34165-36) sold each . . . . . . . $22.99

20126 Shift fork bushing for all 4-speed Big Twins from 36-E76 (repl. OEM 34175-36) sold each . . . . . . . $14.99

20127 Shift fork nut for all 4-speed Big Twins from 36-86 (repl. OEM 34179-33) sold each . . . . . . . . $4.49

28044 Shift finger rollers for 4-speed Big Twins from late 79-86 and Sportster and K models from 54-90 and (repl. OEM 34168-52) pack of 10. . . . . . . . . . . . . . . . . $1.20

Shims and Washers56208 .007"-thick shims. Fit all 4-speed

Big Twins from 36-86 (repl. OEM 6750) pack of 10 . . . . . . . . . . . $1.00

56209 .015"-thick shims. Fit all 4-speed Big Twins from 36-86 (repl. OEM 6752) pack of 10 . . . . . . . . . . . $1.00

56210 Fork washers. Fit all 4-speed Big Twins from 36-E76 (repl. OEM 6754) pack of 10 . . . . . . . . . . . $1.20

56211 Fork washers. Fit all 4-speed Big Twins from 36-E76 (.015" thinner than OEM 6754) pack of 3 . . $1.10

http://www.cus/


10



Motor Factory Transmission Thrust WashersTransmission thrust washer sets and individually sized washers for all 4-speed Big Twins from 36-86. Machined to Original Equipment specifications in the U.S.A. The 7-piece countershaft gear end set includes washers from .074" through .100". Individually sized washers come in shop supply packs of five. Premium mainshaft and countershaft washers are made in the USA and packaged individually.56277 Set of seven different thickness

countershaft thrust washers (repl. OEM 35875-36) . . . . . . . . . . . . . .$21.99

Countershaft Thrust WashersPacks of five unless noted otherwise.56289 .044"-thick (sold each). . . . . . . .$10.99

56278 Washer .074" (repl. OEM 35876-36) pack of 5 . . . . . . . . . . . . . . . . . . . . .$4.00







Countershaft Thrust WasherSold each.56286 Washer, countershaft (repl. OEM

35811-36) . . . . . . . . . . . . . . . . . . . .$5.99

Mainshaft Thrust WashersSold each.56285 Mainshaft washer-standard (repl.

OEM 35365-36) . . . . . . . . . . . . . . .$5.99

56297 Washer, mainshaft (-.005"). . . . .$6.99

56298 Washer, mainshaft (+.005") . . . .$6.99



56285

56277

56286

Premium Needle Roller BearingsOriginal Equipment quality replacement transmission needle bearings for Sportster and Big Twin models. Made in the U.S.A. Sold each.

Closed end – fits the countershaft (cam side) on Sportster and K models from 54-90.25401 Needle bearing, closed end, 54-90

(repl. OEM 35960-54). . . . . . . . .$13.99

Open end – fits the countershaft (clutch side) and mainshaft clutch gears on Sportster and K models from 54-90, and Big Twin countershaft cluster gears from late 76-86.25402 Replaces OEM 35961-52 . . . . . .$10.49

Fits the main drive gear on 4-speed Big Twin models from late 77-81.25450 Replaces OEM 8905 . . . . . . . . . .$19.99

Fits the main drive gear on 4-speed Big Twin models from 82-86.25451 Replaces OEM 8906 . . . . . . . . . .$74.99

25401

25450

25402

Premium Transmission Thrust WashersHigh-quality American-made thrust washers fit all 4-speed Big Twins from 36-86.56270 Thrust washer. Fits low and reverse

gears from 36-86 (repl. OEM 35812-36) pack of 10 . . . . . . . . . . . . . . . .$5.60

56271 Retaining washer. Fits the counter-shaft bearing (outer) from 36-86 (repl. OEM 35915-36) pack of 10 . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$3.80

56272 Washer (repl. OEM 35917-36) pack of 10. . . . . . . . . . . . . . . . . . . . . . . . .$3.80

56273 Retaining washer. Fits the 4th gear roller bearings from 36-E77 (repl. OEM 35131-36) sold each . . . . . .$7.49

56270 5627256273 56271

Duo Seal Mainshaft NutsUnlike other mainshaft nuts on the market, CC’s Duo Seal Nut is made of a higher grade steel, uses a readily available double-lip oil seal (CC #25335) and has an O-ring installed in a recessed area on the backside of the nut. For your convenience, we’ve also included a new mainshaft sprocket lockwasher (CC #25396) in our kit. For 4-speed Big Twins including belt drives and open primaries from 36-80 (except 65-69).15070 Duo Seal Nut kit . . . . . . . . . . . . .$15.99

25335 Replacement seal (repl. OEM 83162-51) pack of 5 . . . . . . . . . . . . . . . . .$1.10

25336 Replacement O-rings (pack of 10) . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$0.50

25396 Lockwashers (repl. OEM 35216-36) pack of 10. . . . . . . . . . . . . . . . . . . .$0.45

25451

Supernut Transmission Sprocket Seal KitPrecision machined sprocket shaft Supernut with replaceable oil seal. Fits 4-speed Big Twin models 70-86. Sold as a kit.667964 Supernut Transmission sprocket seal kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$31.99

667963 Replacement Supernut oil seal, pack of 5. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$4.40



SEATS &BAGS

FOOTCONTROLS

LIGHTING

ELECTRICAL

EXHAUST

ENGINE

GASKETS

DRIVELINE

WHEELSTIRES &BRAKES

CHASSIS

INSTRUMENTS& GAUGES

GENERAL

CROSSREFERENCE

HANDCONTROLS

SHEETMETAL


INTAKE

APPAREL

2541625415

25389

25390

2539125392

25393

2539425395

25396

25397

2540525406

2540825407

Retaining Ring Kit for Big Twin TransmissionKit of commonly used retaining rings in tray with snap-lock lid. Handy reference chart inside lid showing Custom Chrome and OEM part numbers for easy reordering. Rings available in replacement shop supply 10-packs.

Replacement Transmission Retaining Rings for Big Twin and Sportster Models (packs of 10)49103 Clutch release finger shaft. For 70-86 Big Twins (repl. OEM 11000). . . .$0.30

56259 Clutch cover retaining ring. 87-13 (repl. OEM 10998) pack of 10 . . . . . .$0.85

54000 Fits miscellaneous shifter and clutch parts on models from 72-10 (repl. OEM 11002, 11143) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$0.25

49105 Clutch adjusting screw. For 71-E84 Sportster models (repl. OEM 11005) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$0.15

49108 Shifter linkage. For Big Twins from 74-99 (repl. OEM 11016) . . . . . . . . .$0.20

49109 Fits clutch release lever stud on 80-86 Big Twins and detent plate on Sportster models from 91-13 (repl. OEM 11019). . . . . . . . . . . . . . . . . . . . .$0.30

49110 Retaining ring, bearing housing (trapdoor). 80-93 (repl. OEM 11020) pack of 10. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$0.30

49112 Fits miscellaneous shift, clutch and control levers on models from 72-88 (repl. OEM 11036). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$0.20

49113 Foot clutch control rod end. Fits Big Twins from 65-78 (repl. OEM 11037). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $0.20

49114 Transmission gear. For Big Twins from 80-05 and Sportster models from 91-03 (repl. OEM 11067) pack 10. Price each. . . . . . . . . . . . . . . . . . . . . . . .$1.10

49115 Shifter cam support. For Big Twins from 80-05 (repl. OEM 11083) . . . .$0.25

49116 Clutch throwout bearing retaining clip. For Big Twin models from late 75-14 (repl. OEM 11096) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$0.25

49127 Shifter cam. For late 79-86 Big Twins and 52-90 Sportster and K models (repl. OEM 34040-52). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$0.30

56355 Transmission mainshaft ball bearing. For 52-E84 Sportster and K models (repl. OEM 35112-52). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$1.35

56265 Main drive bearing. For 5-speed Big Twins from 84-07 (repl. OEM 11161) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$11.99

56266 Clutch hub assembly for Sportster models 84-90 . . . . . . . . . . . . . . . . . . . .$1.20

56337 Transmission roller bearing. For 52-E84 Sportster and K models (repl. OEM 35113-52) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$1.20

56319 Drive gear bearing race. For 37-E77 Big Twins (repl. OEM 35129-36) . .$1.40

56301 Mainshaft 2nd/3rd gear. For 37-86 Big Twins (repl. OEM 35337-36) . . .$1.20

56320 Retaining ring, mainshaft third gear, 56-90 Sportster and K models (repl. OEM 35337-56) Pack of 10. Price each. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$1.00

56303 Low and second gear. For 40-86 Big Twins (repl. OEM 35810-36) . . . . .$0.95

56302 Countershaft bearing. For 37-E76 Big Twins (repl. OEM 35920-36) . . . .$1.40

Replacement lockwashers for Big Twin and Sportster modelsSold in packs of 1025389 Starter crank for all 4-speed Big Twins from 41-86

(repl. OEM 33082-16). . . . . . . . . . . . . . . . . . . . . . $0.40

25390 Starter clutch for 4-speed Big Twins with kickstart from 41-86 (repl. OEM 33396-39) . . . . . . . . . . . $0.30

25391 Mainshaft for all Sportster and K models from 54-85 (repl. OEM 35050-52) . . . . . . . . . . . . . . . . $0.40

25392 Starter crank gear for all Sportster and K models from 54-79 (repl. OEM 33362-52) . . . . . . . . . . . $0.50

25393 Clutch hub nut for all 4-speed Big Twins from 41-E84 (repl. OEM 37503-41) . . . . . . . . . . . . . . . $0.48

25394 Mainshaft bearing for all 4-speed Big Twins from 41-86 (repl. OEM 35050-40) . . . . . . . . . . . . . . . . $0.40

25395 Clutch hub for all Sportster and K models from 54-E84 (repl. OEM 37533-52A) . . . . . . . . . . . . . $0.45

25396 Mainshaft sprocket for 4-speed Big Twins from 41-E83 (repl. OEM 35216-36) . . . . . . . . . . . . . . . $0.45

25397 Shifter fork nut for all 4-speed Big Twins from 36-86 (repl. OEM 34180-33) . . . . . . . . . . . . . . . . $0.45

25405 Cam follower retainer for all Big Twins from 52-E79 (repl. OEM 34066-52) . . . . . . . . . . . . . . . $0.95

25406 Shifter cam retainer for all Sportster and K models from 54-85 (repl. OEM 34067-52). . . . $0.80

25407 Shifter cam bolt for all Sportster and K models from 55-90 (repl. OEM 34069-71) . . . . . . . . . . . $1.00

25408 Chain tensioner plate for all Big Twin models from 65-00 (repl. OEM 39996-65) . . . . . . . . . . . $0.75

25415 Inner primary bolt for all Evolution Big Twins from 85-05 (repl. OEM 33318-85) . . . . . . . . . . . $0.50

25416 Starter motor shaft bolt for all Big Twins from 89-90 (repl. OEM 33125-89) . . . . . . . . . . . . . . . . $0.70

Vulcan Engineering Transmission Sprocket Chain Conversion Nut.This nut is used when converting a transmission pulley to a chain sprocket. It will take up the extra spline length. Made in the USA from 4140 tool steel. Fits 5-speed & 6 speed Big Twin models 90-Up and 5-speed Sportster models 91-Up. Sold each.612395 612395. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $21.99

http://www.cus/


10



KickStart Kits for 5-Speed Big TwinsComplete heavy-duty kickstart kits for 5-speed Big Twin models 82-99. Features include:• Reinforced aluminum end cover for strength.• CNC machined billet aluminum transmission adapter plate for a precise fit.• Chrome top pivot kick arm with non-slip flat rubber pedal.• Designed with many standard kickstart components for easy maintenance.Available with chrome or polished cover, each kit includes mainshaft extension, gears and other necessary components for bolt-on installation on Big Twin 5-speed models 87-89.Note: Installation on 82-86 models with old style clutch actuator requires update to ball-and-ramp style clutch cable* and releasing kit* (CC #58591). FXR models may require FXST cable. Installation on late 1990-up models requires (CC #070009) clutch adjusting screw. These items must be purchased separately.

Note: May require modification of exhaust system to allow proper cover fit.

NOT for RevTech transmissions

050046 Kit with polished cover . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $255.99

050047 Kit with chrome cover . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $279.99

Conversion Parts for Models 84-90070009 Clutch adjuster screw for all models from late 84-90 . . . . . . . . . . . . . . . . . . $5.99

Replacement Parts for 5-Speed Kick Start Kits050063 16 tooth kicker gear with special bushing . . . . . . . . . . . . . . . . . . . . . . . . . . . $18.99

059002 Chrome kickstart end cover . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $97.99

059004 Adapter plate . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $54.99

059005 Mainshaft extension . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $23.99

059006 Spring for ratchet gear . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $2.99

059007 Clutch pushrod 3.36"-long with flat. Fits late 84-99 . . . . . . . . . . . . . . . . . . . $2.99

059008 Clutch pushrod 3.75"-long. Fits 80-E84 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $2.99

059600 Bushing crank gear stop . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $8.49

Kickstart Kit for 5-Speed TransmissionsThis kit bolts onto any RevTech or OEM style five-speed Big Twin transmission case (except five-speed in a four-speed case) and utilizes the existing gears. The result is a transformation of your modern five-speed into the classic style with a completely functional kick starter. The early style kick cover completes the look but uses late style ball and ramp clutch release and cable, maintaining smooth shifting and gear engagement.Note: Standard pipes do not clear kicker. Must use custom made exhaust.

58292 Fits all Big Twins 90-99. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $519.99

58291 Fits all Big Twins from late 87-89 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $459.99



SEATS &BAGS

FOOTCONTROLS

LIGHTING

ELECTRICAL

EXHAUST

ENGINE

GASKETS

DRIVELINE

WHEELSTIRES &BRAKES

CHASSIS

INSTRUMENTS& GAUGES

GENERAL

CROSSREFERENCE

HANDCONTROLS

SHEETMETAL


INTAKE

APPAREL12247

12242

26244

1245312448

18432

25980

15075 12249

259821907712082

19076

2594225943

25698

25981

25288

25390

25283

2528425281

25699

25291

25287

25389

25282

12082 O-ring, starter crank, 37-86 (repl. OEM 11101) pack of 10. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$0.30

12242 Black replacement rubber (repl. OEM 33182-63TA) sold each . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $4.49

12247 Kick pedal assembly, popsicle-style, with black swivel (repl. OEM 33175-16TA). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $10.99

12249 Kick pedal spring, chrome (repl. OEM 33085-36T) . . . . . . $10.99

12448 Heavy-duty kicker arm with offset, chrome. . . . . . . . . . . . $22.99

12453 Standard kicker arm with offset, chrome (repl. OEM 33057-72T) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $22.99

15075 Kicker shaft, imported (repl. OEM 33096-54TB). . . . . . . . $14.99

18432 Pedal pin bolt kit (repl. OEMs 4336W, 7038, 33213-31, 33215-30) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $2.99

19062 JIMS bushing kit, kicker shaft, +.005" oversize . . . . . . . . . $23.99

19076 Bushing kit, kicker shaft (repl. OEM 33288-37) . . . . . . . . . . $6.49

19077 Seal, starter crank, 37-86 (repl. OEM 33076-37) pack of 10 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $0.70

20019 JIMS kicker shaft, U.S. made (repl. OEM 33096-54B). . . . $76.99

20665 JIMS 3/4"-longer-than-stock kicker shaft for extra exhaust clearance or to eliminate fold-out kickarm. U.S. made. . $84.99

20668 JIMS gear bushing .907" O.D.. . . . . . . . . . . . . . . . . . . . . . . . . $19.99

20669 JIMS gear bushing .925" O.D. . . . . . . . . . . . . . . . . . . . . . . . . . $18.99

25281 Kick starter gear, for late 59-66 FL (repl. OEM 33430-59) 14 tooth . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $16.99

25282 Crank gear, 24 tooth (repl. OEM 33350-36T) . . . . . . . . . . . $17.99

25283 Starter clutch, 39-E75 (repl. OEM 33381-39T) . . . . . . . . . . . $8.49

25284 Kick starter gear, for late 50-E59 FL; 67-69 FL; 71-86 FX (repl. OEM 33430-50T) 16 tooth . . . . . . . . . . . . . . . . . . . . . . . . . . . . $17.99

25287 Nut, crank gear, 37-79 (repl. OEM 7911) . . . . . . . . . . . . . . . . $2.49

25288 Nut, starter clutch, 37-86 (repl. OEM 7977) . . . . . . . . . . . . . $2.49

25291 Spring, starter clutch (repl. OEM 33391-36) . . . . . . . . . . . . . $1.49

25389 Lockwasher, crank gear, 41-86 (repl. OEM 33082-16) pack of 10 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $0.40

25390 Lockwasher, starter clutch, 41-86 (repl. OEM 33396-39) pack of 10. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $0.30

25698 3/8" crank gear pin, 77-86; also for CC #25282 crank gear (repl. OEM 33180-77) pack of 10 . . . . . . . . . . . . . . . . . . . . . . . $0.80

25699 Bushing, mainshaft starter gear, 50-86 (repl. OEM 33438-50) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $2.99

25942 Kicker cover, polished (repl. OEM 33277-36A). . . . . . . . . . $34.99

25943 Kicker cover, chrome (repl. OEM 33277-36TA). . . . . . . . . . $39.99

25980 Stud, kicker spring (repl. OEM 33152-59) . . . . . . . . . . . . . . . $1.49

25981 Key, starter clutch gear (repl. OEM 33393-50) pack of 10. . . $0.55

25982 Washer, kicker shaft (repl. OEM 33080-36) pack of 10 . . . $1.00

26244 Black / Chrome kick pedal assembly, bicycle-style (repl. OEM 33175-16T) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $22.99

Kick Starter Parts for Big Twin ModelsAll parts are listed below in part number order and are sold each unless otherwise noted

Kick Starter Ratchet Gear KitContains the most often required items to repair a poor performing kick starter. Available for 4-speed Big Twins late 59-86 with 14 or 16 tooth starter gear.050070 14 tooth kit for Big Twins from late 59-66 . . . . . . . . . . . . . . .$26.99

050071 16 tooth kit for Big Twins from late 50-E59 and 67-86 . . . .$26.99

050071

http://www.cus/


10



Kickstart Covers for Big TwinsChrome-plated or polished kickstart covers for all 4-speed Big Twins from 36-86.25942 Kicker cover, polished (repl. OEM 33277-36A)

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $34.99

25943 Kicker cover, chrome (repl. OEM 33277-36TA) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $39.99

Note: These covers may only be used in conjunction with the late-style (wafer) throwout bearing.

25955 Replacement clutch release shaft and finger (repl. OEMs 37070-39B, 37074-38A) . . . . . . . . . . . . . $13.99

Chrome Heavy-Duty Kickstart Kit for Big TwinsA complete kit featuring an extra heavy-duty die cast, thick-wall chrome kick cover. For all Big Twin models with four-speed transmissions from 36-86. The die-cast cover has a thicker wall with recessed, counterbored mounting holes for strength. Includes all the necessary parts and hardware.25948 Complete kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $188.99Note: This kickstart kit may only be used in conjunction with the late-style (wafer) throwout bearing.

Replacement Parts25928 Heavy-duty clutch release finger (repl. OEM 37010-39B) . . . . . . . . . . . . . . . $8.99

25956 Shaft and finger for Heavy-Duty Kickstart Kit. . . . . . . . . . . . . . . . . . . . . . . . $13.99

25950 Chrome spacer and sockethead hardware kit for cover . . . . . . . . . . . . . . . $13.99

Kickstart Kits for Big TwinsDesigned to add a kickstarter to all Big Twins with four speed transmissions from 36-86. Includes a reinforced kicker cover, chrome offset kicker arm and gears, clutches, springs, pedal stop, locks and hardware to make the kick conversion complete. Available with a polished or chrome-plated die-cast kicker cover.25940 With chrome kicker cover (repl. OEM 33056-90T) . . . . . . . . . . . . . . . . . . . $167.99

25941 With polished kicker cover. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $131.99Note: These kickstart kits may only be used in conjunction with the late-style (wafer) throwout bearing.

Standard Kicker Cover Shaft and FingerWorks as a stock replacement in any Custom Chrome standard kicker kit or as a replacement for the Original Equipment part.25955 Replacement clutch release shaft and finger (repl. OEMs 37070-39B, 37074-

38A) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $13.99

Chrome Transmission End CoverReplacement end cover for 4-speed Big Twin models 70-86 with electric start only. Die-cast construction with chrome finish.050027 Replaces OEM 33276-70 . . . . . . . . . . . . . . . . . . $52.99

Finned Kicker Cover by PaughcoHere’s a bad-ass Kicker Cover that’s finned and matches the other finned items we offer such as primary & Panhead rocker covers. These heavy-duty covers are cast in 356T6 aluminum, with reinforced bushing area for extra strength… no more broken kick start covers Bro! Fits H/D OHV 74” & 61” and all Flathead 74” & 80” models. Sold raw. Also available is a chromed tranny plug cap & chromed kicker cover cap nuts. Made in USA by Ron & the gang at Paughco.632960 Finned Kicker Cover . . . . . . . . . . . . . . . . . . . . . $141.99

Optional Parts632961 Chromed tranny plug cap. . . . . . . . . . . . . . . . . $12.99

632960

632961



SEATS &BAGS

FOOTCONTROLS

LIGHTING

ELECTRICAL

EXHAUST

ENGINE

GASKETS

DRIVELINE

WHEELSTIRES &BRAKES

CHASSIS

INSTRUMENTS& GAUGES

GENERAL

CROSSREFERENCE

HANDCONTROLS

SHEETMETAL


INTAKE

APPAREL12453 12448

Chrome Kick Arm AssembliesLate-Style Kick Arm AssemblyFits all models from 77-86. Swings at the base of the arm instead of the pedal for better exhaust clearance. Includes kickarm, bracket and pedal rubber.12450 Assembly with round pedal (repl. OEMs 33061-89T, 33057-77) . . . . . . . . . . . . . . . . . . . . .$44.99

050045 Assembly with flat pedal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$47.99

Early-Style Kick Arm AssemblyBoth of these assemblies have an offset to clear most exhaust pipes. For Sportster and FX models from 54-76.050003 Heavy-duty with flat pedal. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$32.99

050017 Standard with flat pedal. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$31.99

Early-Style Kick Arms OnlyBoth of these kick arms have an offset to clear most exhaust pipes. For Sportster and FX models from 54-76.12448 Heavy-duty kicker arm with offset, chrome. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$22.99

12453 Standard kicker arm with offset, chrome (repl. OEM 33057-72T) . . . . . . . . . . . . . . . . . . .$22.99

Replacement Parts12252 Flat kick pedal with chrome swivel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$10.99

12247 Kick pedal assembly, popsicle-style, with black swivel (repl. OEM 33175-16TA) . . . . . . .$10.99

12242 Black replacement rubber (repl. OEM 33182-63TA) sold each. . . . . . . . . . . . . . . . . . . . . . . .$4.49

18432 Pedal pin bolt kit (repl. OEMs 4336W, 7038, 33213-31, 33215-30) . . . . . . . . . . . . . . . . . . . .$2.99

050003

050017

050045

12450

‘Magnum’ Chrome Kick Arm AssemblyThis heavy-duty kicker arm is 1" longer-than-stock and made from forged steel which is highly-polished and then beautifully chrome-plated. The extra-length provides greater leverage for added kicking power.31500 For Sportster models from

54-76 and FX models from 73-76 . . . . . . . . . . . . . . . . . . $27.99

Kicker Pedal KitsComplete kick arm and pedal assemblies, including the kicker spring and spring-stud.91452 Popsicle pedal style . . . . . . . $44.99

Chrome Kickstart Spring CoverFits over the kicker spring on FL models from 41-69. Includes mounting screw.12250 Replaces OEM 33150-59T . . $10.99

http://www.cus/


10



Colored Bicycle Style Kicker PedalsWe've colorized the classic! These bicycle style kicker pedals are offered with WHITE, RED, BLUE, or BLACK rubbers to match the paint job of your scoot! Look awesome on custom builds when matched with our White, Black or Red "Slim Line", "Old School" or "Spider Web" solo seats, P-Pads, colored vintage style handlebar grip sets and rubber floorboard mats. Fit OEM kickarms through 76 as well as most aftermarket kickarms. Feature top-quality colored rubbers, a chrome axle assembly and chrome end cap. Includes bushing, spring washer and bolt. Replaces OEM #33175-16.632320 White / Chrome bicycle kicker pedal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$23.99

632321 Red / Chrome bicycle kicker pedal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$23.99

632322 Blue / Chrome bicycle kicker pedal. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$23.99

26244 Black / Chrome kick pedal assembly, bicycle-style (repl. OEM 33175-16T) . . . . . . . . . . . .$22.99

Heavy-Duty Cast Kick Pedals

Kick start with heavy-duty heavy metal. Available in beautifully polished

brass or chrome. Includes a bushing and spring washer.

12245 Chrome . . . . . . . . . . . . .$34.99

12246 Polished brass . . . . . . .$32.99

Custom Chrome O-Ring PegsAvailable to match our footpegs and toe pegs.19953 Flat O-ring kicker pedal. . . . . . .$21.99

19956 Fits CC #19953 flat kick pedal, and #12931 or #12934 driver pegs, Replacement O-rings (pack of 10) . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$2.99

Paughco Round Kicker PedalA super retro kicker pedal made from solid stock, and then polished. This kicker pedal will work with most kicker arms like our CC #31500 Magnum kicker arm.632268 Round kicker pedal . . . . . . . . . .$26.99

Classic Kick Pedal Assemblies12252 Flat kick pedal with chrome swivel 12247 Kick pedal assembly, popsicle-style,

with black swivel (repl. OEM 33175-16TA) . . . . . . . . . . . . . . . . . . . . . . .$10.99

12242 Black replacement rubber (repl. OEM 33182-63TA) sold each . . .$4.49

Kickstart PedalsThese revolving mount kick pedals fit all models with top pivot kick arms.050007 Flat pedal . . . . . . . . . . . . . . . . . . .$24.99

Kick Pedal Pin Bolt Kit18432 Pedal pin bolt kit (repl. OEMs

4336W, 7038, 33213-31, 33215-30) . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$2.99



SEATS &BAGS

FOOTCONTROLS

LIGHTING

ELECTRICAL

EXHAUST

ENGINE

GASKETS

DRIVELINE

WHEELSTIRES &BRAKES

CHASSIS

INSTRUMENTS& GAUGES

GENERAL

CROSSREFERENCE

HANDCONTROLS

SHEETMETAL


INTAKE

APPAREL

Offset Transmission PlatesThese 1-inch offset mounting plates for 5-speed Softail transmissions, make assembly of Wide Drive swingarm or extra wide rigid-framed customs a snap. The hot set-up for building that extra-wide ride.17285 Chrome mounting plate . . . . . . . . . . . . . . . .$21.99

17286 Raw steel mounting plate . . . . . . . . . . . . . .$17.99

Adjustable Mounting PlatesHigh-quality American-made transmission mounting plate is CNC-machined for accuracy. The built-in dual adjusters operate from the end of the 1/2"-thick steel plate by counterbored sockethead screws. They permit accurate alignment of the mainshaft, ideal for open belt drives. Three holes at the front to fit various frames. Fits 4-speed Big Twin transmissions from 79-86 with flat bottom cases and 36-E78 if the sliders are milled off the bottom of the case.17138 Black . . . . . . . . . . . . . . . . . . . . . . .$69.99Note: Will not work with S.T.D. 4-speed cases.

4-Speed Type Billet

Transmission Mounting PlatesHere’s a great new line of transmission mounting plates! The mounting plates for 4-speed transmissions are made of billet aluminum and available in stock or offset versions for wide tire applications. These plates are made from 3/16” steel plate and are machined, not stamped. Available in stock as well as offset versions for wide tire applications. You can’t find a better selection anywhere else Bro! Made in USA by Motorway.

Tranny Plate for 4-Speed Big Twin frames632015 Stock with no offset. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $75.99

632016 1/4” offset. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $74.99

632017 1/2” offset. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $79.99

632018 1” offset . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $79.99

Steel Offset Transmission Mounting PlatesPermit you to put 5-speed transmissions for Softail models in 4-speed rigid frames. Made from 3/16" steel plate and are machined, not stamped. Offset versions are available for wide tire applications. Made in the USA by Motorway.632009 Stock with no offset. . . . . . . . . . . . . . . . . . . . . . . . . . . . .$69.99

632010 1/4" offset. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$69.99

632011 1/2" offset. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$69.99

632012 3/4" offset. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$69.99

632013 1" offset . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$69.99

632014 1 1/4" offset . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$69.99Note: This conversion will require you to update your 4-speed primary and starter to those fitted to 5-speed Softail models. Additionally, if you use a 86-89 Softail trans-mission, you will need to use a 86-89 clutch hub, and if you use a 90-99 transmission, you will need to use a matching clutch hub.

Transmission Mounting Plate for Softail ModelsLooks great, works great. Chrome-plated, black or raw steel plate will fit all Softail models from 86-99. Replaces OEM 47698-86B.17141 Chrome transmis-

sion mounting plate, Replaces OEM 47698-86B . . . . . . . . . . . . $19.99

650141 Black transmission mounting plate . $18.99

650138 Raw transmission mounting plate . $13.99

17286

17141

Transmission Mounting PlateSteel, chromed, transmission mounting plate for 4-speed Big Twin models 36-85. Drilled for both early and late frame tabs.Note: May interfere with transmission mounted oil filter bracket on late 82-85 models.

060000 Steel, chromed mounting plate . . . . . . . . .$32.99

17285

http://www.cus/


10



070039

070038

Clutch Lever Rods and EndsRods15906 For use with Mousetrap and Suicide

setup (repl. OEM 36918-52) 22 3/8"-long . . . . . . . . . . . . . . . . . . . . . . . . .$7.99

15908 Fits old-style rocker clutch from 36-51 (repl. OEM 36917-36) 18 3/8"-long . . . . . . . . . . . . . . . . . . . . . . . . .$7.99

Clutch Lever Rod EndUsed on CC #’s 15906 and 15908 clutch rods.15909 Repl. OEMs 36916-36, 36916-52

. . . . . . . . . . . . . . . . . . . . . . . . . . . $7.99

1590915908

15906

Vintage-Style Clutch Arm CoverThis chrome cover fits over the clutch release arm on 4-speed Big Twins from 36-E79. It comes complete with a chrome acorn nut and installs easily in seconds.18428 Sold each . . . . . . . . . . . . . . . . . . .$10.99

5-Speed Clutch Release Lever SetA complete chrome-plated clutch release lever set for all 5-speed models from 80-86. This single kit replaces the four separate Original Equipment clutch release arms that the factory has used since 80. Replaces the stock release arm and cable bracket with a stronger, forged release arm and die-cast transmission top cable bracket. Chrome mounting hardware and acorn nut included.18438 Replaces OEM 37063-90T . . . . .$24.99Note: The installation of this part on 80-82 FXR and FLT models will also require the installation of an OEM 38599-83A clutch cable which is routed along the left side of the engine instead of the right. See the CC cable charts in Section 4 for the different styles of cables available.

Clutch Cable BracketAttaches to the stock oil tank, and holds the clutch cable in place. Fits Big Twins from 65-E79.19080 Replaces OEM 62576-65TA. . . .$11.99

Chrome Clutch Release LeverFor all Big Twins up to early 79 with stock or custom frames, including old-style oil tanks.19078 Replaces OEMs 37052-65 (late),

37051-36 (early) and 37053-68 with mousetrap eliminator setup . .$16.99

18430

18433

Chrome Mousetrap Clutch Release LeverFits 41-79 Big Twins (68-E79 hand shift only). Also used with CC #19507 Jockey Shift Conversion Kit and Suicide Setup.19079 Replaces OEMs 37051-36, 37052-65

. . . . . . . . . . . . . . . . . . . . . . . . . . . .$21.99

Transmission Adjusting KitPermits accurate alignment and adjustment of the transmission mainshaft. The transmission is held by the four jam nuts.15999 Fits 4-speed Big Twins from 58-86

(except Softail models) . . . . . . . $28.99

1/4" Offset Driveline KitIn addition to a chrome primary spacer this kit includes a chrome transmission plate, bolts, O-rings, sprocket shaft spacer and rear pulley spacer. Permits the use of 1/2" wider tires in a stock chassis.17289 Fits Softail models from 86-99

. . . . . . . . . . . . . . . . . . . . . . . . . . $89.99

Clutch Release Finger and ShaftReplacement clutch releasing finger and shaft for 4-speed Big Twins from 41-86.070038 Shaft (repl. OEM 37074-38A) . . .$8.99

070039 Releasing finger (repl. OEM 37070-39) . . . . . . . . . . . . . . . . . . . . . . . . . .$8.99

25928 Heavy-duty clutch release finger (repl. OEM 37010-39B) . . . . . . . .$8.99

070021 “E” Clip style retaining ring for 4-speed Big Twins 70-86 (pack of 10) . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$0.50

Chrome Clutch Release LeversChrome replacement clutch release levers for 4-speed Big Twins. Both levers feature a precision-machined early-style broach for the release finger stud, permitting a wider range of applications than the stock lever.18430 Fits 4-speed FL and FX models from

late 79-86 (repl. OEM 37054-79) . . . . . . . . . . . . . . . . . . . . . . . . . . . .$21.99

18433 Fits 4-speed FL and FX models from 68-E79 (repl. OEM 37053-68). .$28.99

93894 Fits RevTech 5 into 4 speed transmissions. . . . . . . . . . . . . . . .$31.99



SEATS &BAGS

FOOTCONTROLS

LIGHTING

ELECTRICAL

EXHAUST

ENGINE

GASKETS

DRIVELINE

WHEELSTIRES &BRAKES

CHASSIS

INSTRUMENTS& GAUGES

GENERAL

CROSSREFERENCE

HANDCONTROLS

SHEETMETAL


INTAKE

APPAREL

663546

Hydraulic Clutch KitsThis hydraulic clutch kit is unique in that you use your existing transmission end cover. The kit includes a hydraulic actuator that replaces the OEM ball and ramp in the Big Twin application. For the Sportster fitment there is a small salve master cylinder with a rod connecting to the stock OEM clutch cable coupling unit. These kits make the lever pull up to 40% easier then a stock cable. Includes chrome 96-06 style handlebar master cylinder , hydraulic line and fittings.663545 Fits Big Twin models 96-06 (except 06 Dyna

Glide models) with 80” long hose . . . $279.99

663546 Fits Sportster models 96-06 with 80” long hose . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $264.99

663547 Rebuild kit for 663545 and 663546 . . . $24.99

663545

Goodridge Hydraulic Clutch AdaptersThese adapters permit the use of universal brake lines to be used to install or convert your ball and ramp style clutch cover to a hydraulic clutch cover. Sold each.614977 Straight . . . . . . . . . . . . . . . . . . $14.99

614978 Bent . . . . . . . . . . . . . . . . . . . . . $14.99

614118

614122

Goodridge Hydraulic Clutch Line KitsGoodridge is proud to introduce their All-new hydraulic clutch line kits for Touring models. Kits feature either black or clear coated stainless braided hose with steel fittings and available in over lengths. Fits all Touring models with Hydraulic clutches from 14-Up.

Clear Coated Braided Stainless Steel614118 +4 Fits all FLH / FLT models from 14-Up with hydraulic clutch, Clear coated . . . . . . . . . .$53.99

614119 +6 Fits all FLH / FLT models from 14-Up with hydraulic clutch, Clear coated . . . . . . . . . .$53.99

614120 +8 Fits all FLH / FLT models from 14-Up with hydraulic clutch, Clear coated . . . . . . . . . .$53.99

614121 +10 Fits all FLH / FLT models from 14-Up with hydraulic clutch, Clear coated. . . . . . . . .$53.99

Black Coated Braided Stainless Steel614122 +4 Fits all FLH / FLT models from 14-Up with hydraulic clutch, Black. . . . . . . . . . . . . . . . .$53.99

614123 +6 Fits all FLH / FLT models from 14-Up with hydraulic clutch, Black. . . . . . . . . . . . . . . . .$53.99

614124 +8 Fits all FLH / FLT models from 14-Up with hydraulic clutch, Black. . . . . . . . . . . . . . . . .$53.99

614125 +10 Fits all FLH / FLT models from 14-Up with hydraulic clutch, Black. . . . . . . . . . . . . . . .$53.99

http://www.cus/


10



Heavy Duty Soft Pull Clutch Kit by Custom Chrome• Reduces the effort needed to pull the clutch lever by

approximately 40%• Comes with a large diameter heavy duty throw out bearing, a big

advantage when using a performance clutch• Designed to fit all Big Twins from 87-Up• Comes complete with early and late style transmission side cover

gasket697400 Soft pull clutch kit Big Twins 87-Up . . . . . . . . . . . . . . . . . . . . .$31.99

Replacement parts697401 Clutch ramp . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$12.99

697402 Throw out bearing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$12.99

EZ-Pull Clutch Kit for Big TwinsA redesigned clutch ramp and new spring help reduce the effort required to pull the clutch on 98-Up Big Twins.688225 EZ-Pull clutch kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$39.99

Burly ‘Easyboy’ Lite ClutchBurly claims that the ‘Easyboy’ Lite Clutch reduces the manual effort required to pull the clutch lever by 40%, which lessens rider fatigue and provides smoother, easier clutch action. Ideal for women riders, or those of us who constantly find themselves caught in stop-and-go traffic. The Lite Clutch fits inside of the primary cover on Sportster models, and the transmission cover on Big Twins. It extends the clutch operating mechanism for improved leverage and still disengages the clutch completely. The Lite Clutch may be installed in under 30 minutes and comes complete with instructions.28473 Fits all Big Twins (except FXR models) from 87-99 and 4-speed

Evolution Sportster models from 86-90. . . . . . . . . . . . . . . . . .$34.99

28474 Fits all 5-speed Sportster models from 91-93 . . . . . . . . . . . .$34.99

688961 Fits all Big Twins 00-14 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$34.99

Clutch Release KitIncludes balls and ramp, coupling and gaskets. Replaces OEMs 24552-87A, 8873, 34920-86, 25453-87A and 36801-87B58591 Fits Big Twins from 87-99 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$19.99

Mousetrap Eliminator Soft-Pull Conversion KitEliminates mousetrap linkage on pre-68 models and converts to late-model (68-E79) soft-pull linkage.19942 Complete kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $49.99

Chrome Mousetrap Eliminator BracketRuns cable directly to clutch. Fits early and late models. Designed to eliminate any cable interference with oil tank or stock parts.18429 Chrome-plated . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $11.99



SEATS &BAGS

FOOTCONTROLS

LIGHTING

ELECTRICAL

EXHAUST

ENGINE

GASKETS

DRIVELINE

WHEELSTIRES &BRAKES

CHASSIS

INSTRUMENTS& GAUGES

GENERAL

CROSSREFERENCE

HANDCONTROLS

SHEETMETAL


INTAKE

APPAREL

1742517661

17421

Clutch Parts for 5-Speed Big Twin ModelsReplacement components for their Original Equipment counterparts. Sold each.17422 Clutch pressure plate for Big Twins from 90-97 (repl. OEM 37912-91A) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $11.99

17441 Clutch pressure plate for Big Twins from 98-Up (repl. OEM 37912-98) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $15.99

17423 Clutch release plate for Big Twins from 90-97 (repl. OEM 37903-90). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $7.49

17427 Clutch seat for Big Twins from 90-97 (repl. OEM 37872-90). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $6.99

17428 Clutch mainshaft nut for Big Twins from 90-97 (repl. OEM 37496-90) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $11.99

070018 Clutch bearing for Big Twins from late 84-89 (repl. OEM 37906-84) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $28.49

75579 Clutch bearing for Big Twins from 90-06 (repl. OEM 37906-90) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $19.99

Outer Clutch BasketsInclude the primary sprocket and the starter ring gear.629310 Fits all Big Twins from 07-10 (repl. OEM 37813-06A) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $259.99

17660 Fits all Big Twins from 98-06 (repl. OEM 37707-98A) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $269.99

17421 Fits Evolution Big Twins from 94-97 (repl. OEM 37707-94). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $229.99

17420 Fits Evolution Big Twins from 90-93 (repl. OEM 37707-90). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $237.99

629311 Fits all Sportster models from 91-03 (repl. OEM 36790-91) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $239.99

Replacement Starter Ring Gear KitsIncludes the ring gear and new hardware for installation.23184 102-tooth ring gear kit for CC # 17421 and OEMs 37707-98A, 37709-94 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $55.99

23185 66-tooth starter ring gear with hardware fits only CC #17420 clutch basket and OEM 37707-90 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $55.99

Inner Clutch HubsReplacement inner clutch hubs for Big Twin models from late 84-06. The early model hub (CC #17425) includes an improvement to the tapered sleeve to prevent it from splitting at the key-way as was common on the original design. Also included is a Clutch Hub Reinforcement Washer that adds greatly to the strength of the part, eliminating such breakage.17661 Fits all Big Twins from 98-06 except 06 Dyna (repl. OEM 37550-98). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $85.99

17436 Fits Evolution Big Twins from 90-97 (repl. OEM 37550-90A) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $51.99

17425 Fits Evolution Big Twins from late 84-89 (repl. OEM 37550-84A) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $127.99

Clutch Retaining Rings for Big Twin and Sportster ModelsThese often neglected service items should be replaced whenever the clutch is disassembled. Sold in packs of 10.17412 Pressure plate internal retaining ring for Big Twins from 90-97 (repl. OEM 37908-90). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $2.70

17413 Pressure plate external retaining ring for Big Twins from 90-97 (repl. OEM 37909-90) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $2.50

17426 Clutch hub external retaining ring for Big Twins from 90-97 (repl. OEM 37904-90) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $3.00

35107 Pressure plate retaining ring for Big Twins from late 84-89 (repl. OEM 37907-84) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $2.00

35108 Clutch hub bearing retaining ring for Big Twins from late 84-89 (repl. OEM 37904-84) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $1.70

56263 Clutch hub retaining ring for Sportster and Buell models from late 84-02 (repl. OEM 11046) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $0.65

1766017422

17436

http://www.cus/


10



Ball Bearing Lock Up Clutches from BDLBDL’s new patent pending Ball Bearing Lock Up clutch is now standard equipment with all SS2 2" belt drives and RevTech 3" open belt drives. This ball bearing ramp style clutch set up reduces clutch slips no matter what displacement motor you own. It’s a must for big inch motors.642641 For all BDL open belt drives (except

TF). . . . . . . . . . . . . . . . . . . . . . . . .$209.99

642642 For all Primo belt drives . . . . .$209.99

642643 For stock clutch assemblies from 98-07 . . . . . . . . . . . . . . . . . . . . . .$209.99

Compu-Fire 1084 Gear SetEngineered to increase the starter motor torque by lowering the gear ratio of the pinion gear to the clutch ring gear. When used as a replacement for the 9:66 ratio gear sets, a 15% increase in torque is obtained. Can also be used as a re-placement for the weak 10:102 ratio gear sets which are prone to breaking.610302 Fits all Big Twins from 98-06 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $163.99

Easy Starter Kits for Big Twin Models Improves starting on high-compression big inch engines through an improved starter-to-clutch basket gear ratio. Complete kits include a clutch basket for Big Twin models with a 66-tooth starter ring and a 9-tooth starter pinion gear.17664 Complete kit for Big Twin models

from 94-97 . . . . . . . . . . . . . . . . .$243.99

17665 Complete kit for Big Twin models from 98-06 (except 06 Dyna) . . . . . . . . . . . . . . . . . . . . . . . . . $243.99

Replacement Parts17448 Clutch basket with ring gear for CC

#17664. . . . . . . . . . . . . . . . . . . . .$234.99

17663 Clutch basket with ring gear for CC #17665. . . . . . . . . . . . . . . . . . . . .$249.99

23185 66-tooth starter ring gear with hardware fits only CC #17420 clutch basket and OEM 37707-90 . . .$55.99

23183 9-tooth pinion gear . . . . . . . . . .$22.99

42764Kevlar Clutch Kits by Belt Drives LimitedHigh performance clutch kits incorporate Kevlar as an asbestos replacement. Kevlar offers improved strength, thermal stability and wear resistance.42761 Includes 9 Kevlar friction discs and 8 steel drive plates for all Big Twin models from 90-97

and Sportster models from 91-03 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $146.99

42762 Includes 8 Kevlar friction discs and 6 steel drive plates for all Big Twin models from 90-97 and Sportster models from 91-03. Uses CC #17066 double riveted steel plate . . . . . . $125.99

42814 Includes 9 Kevlar friction discs and 8 steel drive plates for all Big Twin models from 98-14 (not shown) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $138.99

42763 Includes 6 Kevlar friction discs and 7 steel drive plates for all Evolution Big Twin models from 84-89 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $110.99

42764 Includes 5 Kevlar friction discs and 4 steel drive plates for all non-Evolution Big Twin models from 41-E84 (41-67 models use 4 friction discs and 3 steel drive plates) . . . . . $95.99

42761

42763

42762



SEATS &BAGS

FOOTCONTROLS

LIGHTING

ELECTRICAL

EXHAUST

ENGINE

GASKETS

DRIVELINE

WHEELSTIRES &BRAKES

CHASSIS

INSTRUMENTS& GAUGES

GENERAL

CROSSREFERENCE

HANDCONTROLS

SHEETMETAL


INTAKE

APPAREL

‘Carbo-Nite’ Clutch Kits by Alto Products• Designed for high-

performance use• Treated with Melonited nitrite

to enhance performance• 10% more surface area than stock for greater holding power• Lined with proprietary carbon-based material capable of

resisting high-temperatures and torque applications• Lifetime warranty699605 Fits all Big Twins from 98-14 . . . . . . . . . . . . . . . . . . . . . . . $149.99

09605 Fits all Big Twins from 90-97 and Sportster and Buell models from 91-14 (except XB models) . . . . . . . . . . . . . . . . . . . . . $149.99

699606 Fits all Big Twins from late 84-89 . . . . . . . . . . . . . . . . . . . $149.99

699607 Fits all Big Twins from 41-E84 . . . . . . . . . . . . . . . . . . . . . . $149.99

16211

1622516212

16210

16209

16213

Alto Products Steel Drive PlatesQuality stock replacement drive plates are manufactured to exacting tolerances to ensure smooth, progressive clutch action. Sold each unless otherwise noted.070527 Fits Big Twins from 98-Up (replaces OEM 37913-98). Sold as set

of 8 plates. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$39.9917066 Clutch spring plate (smooth) for Big Twins from 90-97 (replaces

OEM 37977-90) not shown. . . . . . . . . . . . . . . . . . . . . . . . . . . . .$46.9916211 Fits Big Twins from 90-97 and Sportster models from 91-14 (6

required) replaces OEM 37913-90 . . . . . . . . . . . . . . . . . . . . . . .$4.9916213 Fits Big Twins from late 84-89 (7 required) replaces OEM 37975-

84A. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$4.49

16212 Fits Big Twins from 41-67 (3 required), and 68-E84 (4 required) replaces OEMs 37975-41, 37975-81 . . . . . . . . . . . . . . . . . . . . . .$4.49

16210 Fits Sportster models from late 84-90 (5 required) replaces OEM 36787-84 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$4.69

16209 Fits Sportster models from 71-E84 (8 required) replaces OEM 37992-71A . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$4.49

070520 Fits Sportster models from 52-70. (7 required) replaces OEM 37992-52 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$4.69

Improved Early Big Twin Drive PlatesUniform clutch hub lug cutouts distribute drive force more evenly than traditional plates that have three large and three small cutouts. Sold each.16225 Fits Big Twins from 41-67 (3 required), and 68-E84 (4 required)

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$5.49

Custom Chrome Full Plate Clutch SetsCustom Chrome’s legendary high-performance clutch friction material formula in either 4 or 5-plate sets. These clutch sets can be used wet or dry and include a clutch hub friction disc and rivets.15052 Fits Big Twins from 36-67

(set of four full plates) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$38.99

15053 Fits Big Twins from 68-E84 (set of five plates) replaces OEM 37850-68 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$45.99

Note: While these clutch plates are designed to be run wet or dry, they may not be run in an oil bath in a sealed primary.

Custom Chrome Early Model Half Plate Clutch KitComplete early clutch kit includes three full friction plates, one half plate, and a friction disc with rivets in CC’s high-performance clutch friction material. For Big Twins from 41-67.15055 Replaces OEM 37850-41

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$48.99

Replacement Belt Drive Clutch Kits by Alto Products

Replacement clutch kits for the leading manufacturer’s of belt drive units.

Replacement Kit for BDL Belt DrivesThis kit is made from Kevlar and comes complete with friction and drive plates.699608 Complete kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $60.99

Replacement Kit for Primo Belt DrivesThis kit features Alto’s Red Eagle friction material. Complete with friction and drive plates.699609 Complete kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $75.99

699608

699609

Clutch Sets for Sportster Models15051 For 71-E84. Set of 8 plates – wet (repl. OEM 37985-71T)

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $32.99

Clutch Drive Plate for Big TwinsReplacement steel drive plate for the Big Twins from 41-E84. Sold each.15054 Replaces OEMs 37975-41, 37975-81 . . . . . . . . . . . . . . . . . . $14.99

http://www.cus/


10



Alto Products Kevlar Clutch KitsNo more overpowering your clutch with these kits that hook-up solidly even with hot rod engines or heavy touring loads. Advanced lining compound contains tough, durable Kevlar material.070516 Set of 9 friction discs for Big Twin models from 98-14 (replaces

OEM 37932-98) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $75.99

16226 Set of 8 friction discs for Evolution Big Twin models from 90-97 and Evolution Sportster models from 91-14 (replaces OEMs 37910-90, 37911-90). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $78.99

16227 Set of 6 friction discs for Big Twin models from late 84-89 (replaces OEM 37930-84) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $62.99

16207 Set of 5 friction discs for Big Twin models from 68-E84 (replaces OEM 37930-68) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $52.99

16205 Set of 4 friction discs for Big Twin models from 41-67 (replaces OEM 37850-41) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $42.99

16224 Set of 7 friction discs for Sportster models from late 84-90 (replaces OEM 36788-84) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $74.99

16201 Set of 8 friction discs for Sportster models from 71-E84 (replaces OEM 37985-71) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $62.99

070511 Set of 7 friction discs for Sportster models from 54-70 (replaces OEM 37985-52A). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $71.99

Alto Products Organic Clutch KitsWhen top-quality organic linings are preferred, there is no better choice than our clutches for a perfect Original Equipment replacement.070508 Set of 9 friction discs for Big Twin models from 98-14 (replaces

OEM 37932-98) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $63.99

16203 Set of 8 friction discs for Evolution Big Twin models from 90-97 and Evolution Sportster models from 91-14 (replaces OEMs 37910-90, 37911-90). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $35.99

16208 Set of 6 friction discs for Big Twin models from late 84-89 (replaces OEM 37930-84) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $26.99

16206 Set of 5 friction discs for Big Twin models from 68-E84 (replaces OEM 37930-68) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $27.99

16204 Set of 4 friction discs for Big Twin models from 41-67 (replaces OEM 37850-41) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $23.49

16202 Set of 7 friction discs for Sportster models from late 84-90 (replaces OEM 36788-84) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $42.99

16200 Set of 8 friction discs for Sportster models from 71-E84 (replaces OEM 37985-71) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $36.99

1622616224

16227

16201

1620516207

Heavy Duty Soft Pull Clutch Kit by Custom Chrome• Reduces the effort needed to pull the clutch lever by

approximately 40%• Comes with a large diameter heavy duty throw out bearing, a big

advantage when using a performance clutch• Designed to fit all Big Twins from 87-Up• Comes complete with early and late style transmission side

cover gasket697400 Soft pull clutch kit Big Twins 87-Up . . . . . . . . . . . . . . . . . . . . .$31.99

Replacement parts697401 Clutch ramp . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$12.99

697402 Throw out bearing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$12.99

EZ-Pull Clutch Kit for Big TwinsA redesigned clutch ramp and new spring help reduce the effort required to pull the clutch on 98-Up Big Twins.688225 EZ-Pull clutch kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$39.99



SEATS &BAGS

FOOTCONTROLS

LIGHTING

ELECTRICAL

EXHAUST

ENGINE

GASKETS

DRIVELINE

WHEELSTIRES &BRAKES

CHASSIS

INSTRUMENTS& GAUGES

GENERAL

CROSSREFERENCE

HANDCONTROLS

SHEETMETAL


INTAKE

APPAREL

Late-Style Throw-Out Bearing Kits for Big TwinsReplacement throw-out bearing kits for Big Twin models (except 5-speeds) from 41-E84. Includes the clutch pushrod, release finger, retaining ring, oil slinger, thrust washers, clutch rod bushing, and a late-style super heavy-duty, industrial grade bearing – designed for extreme service demands. With much heavier design requirements than the 75-10 Original Equipment bearing, it can be fitted as a kit to update earlier models, or the bearing can be purchased separately to replace the standard bearing.

Complete Kits25968 Fits Big Twins from 36-64 with 11.75"-long mainshaft (repl.

OEM 37305-41) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $26.99

25969 Fits Big Twins from 65-69 with 12"-long mainshaft (repl. OEM 37305-65) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $27.99

28062 Fits Big Twins from 70-E84, with 12.50"-long mainshaft (repl. OEM 37305-70) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $27.99

Replacement Parts25928 Heavy-duty clutch release finger (repl. OEM 37010-39B) . . .$8.99

28046 Throw-out bearing only. Includes everything in the complete kits except the clutch pushrod and release finger . . . . . . . $21.99

49116 Clutch throwout bearing retaining clip. For Big Twin models from late 75-14 (repl. OEM 11096) . . . . . . . . . . . . . . . . . . . . . .$0.25

15021 Clutch push rod bearing kit. Late 75-Up (repl. OEM 37312-75, 37313-80 and 11066) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$7.49

Motor Factory Early-Style Throw-Out Bearing KitsThese early-style kits are assembled by Custom Chrome using only the highest-quality components from our line of Motor Factory replacement parts. The kits listed below will fit all Big Twin models from 36-69 and come complete with a clutch pushrod, a kicker cover gasket and a Premium throw-out bearing.56274 Fits Big Twins from 36-64 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$61.99

56275 Fits Big Twins from 65-69 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$61.99

56003 Replacement Motor Factory bearing ONLY, Replaces OEM 37310-39 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$58.99

Motor Factory Early-Style Throw-Out Bearing KitA kit with the early-style bearing assembled by Custom Chrome using our top-quality line of Motor Factory replacement parts. Fit all 70-E75 Big Twins, and will also convert all late 75-E84 4-speed Big Twins from the late “wafer” bearing to the more reliable early-style bearing. Kit includes a clutch pushrod, a kicker cover gasket, a starter clutch and a Premium throw-out bearing.56276 Fits all 4-speed Big Twins from 70-E84. . . . . . . . . . . . . . . . $61.99

56003 Replacement Motor Factory bearing ONLY, Replaces OEM 37310-39 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $58.99

Motor Factory Early-Style Clutch Throw-Out BearingThis American-engineered part replaces the clutch throw-out bearing used on all Big Twin models from 36-E75. Made from all-new production tooling, this Custom Chrome exclusive is not just another troublesome copy of the original bearing. It is a true replacement part that restores the reliability and durability that made the original design famous.56003 Replacement Motor Factory bearing ONLY, Replaces OEM

37310-39 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $58.99

070024

070034

Late Style Throw-Out Bearing Kits for Big TwinsStock Style KitIncludes 2 thrust washers, bearing and retainer ring. Fits Big Twins from late 75-14 (replaces OEMs 37313-80, 37312-75).070034 Throw-out bearing kit. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $8.49

100145 Replacement bearing only. Replaces OEM 37312-75. Sold each. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $5.99

100146 Replacement thrust washer only. Replaces OEM 37313-80. Sold each. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $4.99

49116 Clutch throwout bearing retaining clip. For Big Twin models from late 75-14 (repl. OEM 11096) . . . . . . . . . . . . . . . . . . . $0.25

Heavy Duty KitUpdated kit includes our industrial grade bearing, thrust washers, bearing spacer and retaining ring. The bearing features 16 rollers compared to only 9 for the stock part. Fits 4-speed Big Twins only 75-86.070024 Throw-out bearing kit. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $15.99

49116 Clutch throwout bearing retaining clip. For Big Twin models from late 75-14 (repl. OEM 11096) . . . . . . . . . . . . . . . . . . . $0.25

http://www.cus/


10



Right(Bearing Side)

Center

56007 141/8"-long

56004 131/4"-long

56005 131/2"-long

56006 14"-long

56004 56005 56006

56007

Left(Clutch Side)

Clutch Pushrod Kits for Early Sportster ModelsThese 4-piece kits are American-made and replace the Original Equipment parts which are now obsolete from the factory.26450 Clutch pushrod kit, 4-piece for 56-66 KH and XLH models, and

58-69 XLCH models (repl. OEMs 37276-53, 37279-56, 37281-47, 37282-53) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $25.99

26451 Clutch pushrod kit, 4-piece for 67-70 XLH and 70 XLCH (repl. OEMs 37276-53, 37280-67, 37281-47, 37282-53). . . . . . . . . $30.99

26450

26451

Premium Clutch Pushrods for 4-Speed Big Twin Models56004 For 36-64 (repl. OEM 37285-36). . . . . . . . . . . . . . . . . . . . . . . . . $6.99

56005 For 65-69 (repl. OEM 37285-65). . . . . . . . . . . . . . . . . . . . . . . . . $7.49

56006 For 70-E75 (repl. OEM 37285-70) . . . . . . . . . . . . . . . . . . . . . . . $6.99

56007 For late 75-E84 (repl. OEM 37285-75A) . . . . . . . . . . . . . . . . . . $7.99

49116 Clutch throwout bearing retaining clip. For Big Twin models from late 75-14 (repl. OEM 11096) . . . . . . . . . . . . . . . . . . . . . $0.25

Pushrod Adjusting ScrewCase hardened for maximum durability. An inexpensive way to solve problems caused by a worn throwout bearing. With roller bearing. Fit Big Twin models from 41-E84.15995 Card of 12. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$2.83

Pushrod Adjusting ScrewAdjusting screw without roller bearing. Fit Big Twin models (except diaphragm clutch) from 41-E84. Sold each.20020 Replaces OEM 37357-41 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$2.99

Clutch Pushrods for Late Model Big TwinsA wide selection of American-made 3-piece clutch pushrods to fit 4-speed models (with diaphragm clutch) from late 84-86, 5-speed models and 6-speed models. Each piece is heat-treated where necessary. Sold each.

All Late 84-86 4-Speed Models15013 Right End (repl. OEM 37089-84), 2.66” . . . . . . . . . . . . . . . . . . . $5.99

15018 Center Piece (repl. OEM 37285-84), 11.06” . . . . . . . . . . . . . . . $7.99

15015 Left end (repl. OEM 37090-84) . . . . . . . . . . . . . . . . . . . . . . . . . . $6.99

All 80-E84 5-Speed Models15011 Right End (repl. OEM 37089-79) , 1.90” . . . . . . . . . . . . . . . . . . $3.99

15010 Center Piece (repl. OEM 37088-79) , 10.20” . . . . . . . . . . . . . . . $9.99

15012 Left End (repl.OEM 37090-79), 1.57” . . . . . . . . . . . . . . . . . . . . . $3.99

All Late 84 5-Speed Models15013 Right End (repl. OEM 37089-84), 2.66” . . . . . . . . . . . . . . . . . . . $5.99

15014 Center Piece (repl. OEM 37088-84), 10.4”. . . . . . . . . . . . . . . . . $9.99

15015 Left end (repl. OEM 37090-84) . . . . . . . . . . . . . . . . . . . . . . . . . . $6.99

All 85-86 5-Speed Models15013 Right End (repl. OEM 37089-84), 2.66” . . . . . . . . . . . . . . . . . . . $5.99

15016 Center Piece (repl. OEM 37088-85) , 11.18” . . . . . . . . . . . . . . . $9.99

15015 Left end (repl. OEM 37090-84) . . . . . . . . . . . . . . . . . . . . . . . . . . $6.99

All 87-89 5-Speed Models15013 Right End (repl. OEM 37089-84), 2.66” . . . . . . . . . . . . . . . . . . . $5.99

15017 Center (repl. OEM 37088-87), 11.41”. . . . . . . . . . . . . . . . . . . . . $9.99

15015 Left end (repl. OEM 37090-84) . . . . . . . . . . . . . . . . . . . . . . . . . . $6.99

All 90-98 5-Speed Models93534 Right End with Oil Slinger (repl. OEM 37069-90) . . . . . . . . . $13.99

15020 Center (repl. OEM 37088-90) . . . . . . . . . . . . . . . . . . . . . . . . . . . . $6.99

15015 Left end (repl. OEM 37090-84) . . . . . . . . . . . . . . . . . . . . . . . . . . $6.99

All 99-06 5-Speed Models93534 Right End with Oil Slinger (repl. OEM 37069-90) . . . . . . . . . $13.99

15020 Center (repl. OEM 37088-90) . . . . . . . . . . . . . . . . . . . . . . . . . . . . $6.99

All 06-Up 6-Speed Models93534 Right End with Oil Slinger (repl. OEM 37069-90) . . . . . . . . . $13.99

600374 Center (repl. OEM 37092-06) . . . . . . . . . . . . . . . . . . . . . . . . . . . . $9.99

Clutch Adjusting Screw070009 Fits Big Twins from late 84-E90 (repl. OEM 37357-84) sold each

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$5.99

Clutch Adjusting ScrewCase hardened steel for durability. Fits Big Twin models from 91-97(can also be used to upgrade the 2-piece adjuster on models from 84-90 (repl. OEM 37090-84A)15009 Sold each . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$10.99



SEATS &BAGS

FOOTCONTROLS

LIGHTING

ELECTRICAL

EXHAUST

ENGINE

GASKETS

DRIVELINE

WHEELSTIRES &BRAKES

CHASSIS

INSTRUMENTS& GAUGES

GENERAL

CROSSREFERENCE

HANDCONTROLS

SHEETMETAL


INTAKE

APPAREL

One-Piece Retainer with BearingsThis clutch hub roller retainer has a unique seamless, one-piece construction. The lack of spot welds or seams helps prevent splitting or cracking. For all Big Twins from 58E-84. Complete with rollers.18329 Replaces OEM 37566-58 . . . . . . . . . . . . . . . . . . . . . . . . . . . . $17.99

Clutch Hub Assembly with Five Adjustable StudsA complete five-finger clutch hub assembly for all Big Twins (except diaphragm clutch) from 36-E84. The five finger style uses 5 long studs, provides more even adjustment, greater support and less plate wobble than the late-style 3 short stud hub. Assembled hub is complete with studs and nuts, friction disc with rivets, bearing retainer with bearings, bearing retainer plate and special five-finger pressure plate.26500 Complete clutch hub (repl. OEM 37550-41TB). . . . . . . . . $79.99

Replacement Parts for Five Finger Hubs070071 Clutch hub only. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $61.99

19500 Pressure plate only . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $6.99

19384 Bearing plate (repl. OEM 37576-41). . . . . . . . . . . . . . . . . . . $5.99

18232 Spring for bearing plate (repl. OEM 37574-44) pack of 10 $0.75

18333 Friction disc and rivets (repl. OEM 37549-41T) . . . . . . . . . $7.99

18230 Short studs ONLY. Sold each. . . . . . . . . . . . . . . . . . . . . . . . . . $2.49

18231 Long studs ONLY. Sold each . . . . . . . . . . . . . . . . . . . . . . . . . . $3.49

20018 Nuts for studs (card of 10 packs of 3) . . . . . . . . . . . . . . . . . $0.93

Standard Clutch Hub Assembly with Three StudsFits 36-E84 Big Twins (except diaphragm clutch) and includes clutch hub with studs, friction disc with rivets, bearing retainer with bearings and bearing retainer plate.25295 Complete clutch hub (repl. OEM 37550-41B). . . . . . . . . . . . .$79.99

Replacement Parts for Three Finger Hubs17404 Clutch hub only. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$49.99

18328 Pressure plate only (repl. OEM 38010-41). . . . . . . . . . . . . . . . .$5.99

19384 Bearing plate (repl. OEM 37576-41). . . . . . . . . . . . . . . . . . . . . .$5.99

18232 Spring for bearing plate (repl. OEM 37574-44) pack of 10. .$0.75

18333 Friction disc and rivets (repl. OEM 37549-41T) . . . . . . . . . . . .$7.99

20097 Clutch hub key (repl. OEM 37523-15) pack of 10 . . . . . . . . . .$2.50

56308 Key, clutch hub for models from 85-89 (repl. OEM 37523-85) pack of 10. Price each. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$1.20

18680 Complete stud set (3 long, 7 short) . . . . . . . . . . . . . . . . . . . . .$21.99

18230 Short studs ONLY. Sold each. . . . . . . . . . . . . . . . . . . . . . . . . . . . .$2.49

18231 Long studs ONLY. Sold each . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$3.49

20018 Nuts for studs (card of 10 packs of 3) . . . . . . . . . . . . . . . . . . . .$0.93

Clutch Hub Assemblies with Long Roller BearingsComplete clutch hub assemblies feature “long style” roller bearings to eliminate the wobble common in Big Twin clutches. Originally designed for belt drives, long roller clutch hubs deliver smooth clutch action, even in big inch strokers. Available in 3 or 5 finger styles, complete with friction disc and rivets, pressure plate and nuts, 53 long roller bearings (one extra), special bearing grease and seal, bearing retainer plate and springs. These clutch hub assemblies fit all Big Twin models from 41-E84.17400 3-finger assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$81.99

17401 5-finger assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$99.99

Note: It may be necessary to hone your clutch shell to permit the installation of these kits.

17401 17400

http://www.cus/


10



Starter Ring GearReplacement ring gear for the clutch drum. Fits electric start Big Twins (except diaphragm clutch) from 65-E84.17402 Replaces OEM 33163-65B . . . . .$56.99

Clutch Shell and SprocketComplete with the starter ring gear. Fits Big Twins from 70-E84 (except diaphragm clutch) with chain primary drives.17403 Replaces OEM 37702-70A. . . .$224.99

High-Performance Clutch Drum RetainerDesigned to hold the clutch drum in place. Provides increased releasing disc movement for a more consistent clutch disengagement. Cures the problem of “grabby” clutches on Big Twin models from 36-E84. Works with chain or belt drive.070082 Complete kit . . . . . . . . . . . . . . . . .$6.49

Note: 3-stud clutch hubs only.

Long Roller Clutch Hub Bearing and Drum Retainer KitThis long roller bearing kit provides smooth clutch operation by eliminating clutch drum wobble. It features our high performance drum retainer which increases releasing disc movement for a more consistent clutch disengagement. Works with 3-stud clutch hub only.070086 Complete kit fits Big Twin models

41-E84 . . . . . . . . . . . . . . . . . . . . . .$31.99

Polished Clutch Releasing DiscProvides the strength, accuracy and heat dissipation necessary for high-performance and hard riding. Eliminates clutch slippage, and provides smoother clutch action. Fits Big Twins (except diaphragm clutch) from 41-E84.19263 Replaces OEM 37805-83T . . . . .$24.99

Clutch Releasing Disc for Big TwinsStock type steel releasing disc works with 3, 5 or 10 finger clutch hubs. Fits Big Twin models from 41-E84070049 Replaces OEM 37871-41 . . . . . .$22.99

Nylatron ‘Free Floating’ Clutch Hub LiningA rivetless, ‘free-floating’ clutch hub friction disc made from Nylatron for 4-speed Big Twins from 36-E84. This special nylon disc eliminates the riveted connection between the hub and the lining. It provides smoother engagement, eliminates ‘chatter’, and because it’s self-lubricating, is ideal for belt drives.18327 Clutch friction disc, Sold each .$14.99

High-Performance Clutch Hub Friction DiscMade from Nylatron, a space-age nylon. Improves the performance of your 41-E84 Big Twin clutch whether run wet or dry. This part is unaffected by oil, and helps reduce ‘clutch chatter’ during engagement. Works well when installed with our clutch hub bearing kit (CC #42108).42109 Friction disc and rivets . . . . . . . . .$9.79

Clutch Hub Bearing Kit for Belt DrivesReplaces the stock bearings and retainer on the clutch hub and effectively eliminates the wobble. By doing this, the clutch basket will run true, preventing premature belt wear. The kit contains 53 ‘5211’ steel bearings hardened for a lifetime of use, a tube of special grease, 3 spring retainers and a special bearing seal.42108 Complete kit . . . . . . . . . . . . . . . $26.49



SEATS &BAGS

FOOTCONTROLS

LIGHTING

ELECTRICAL

EXHAUST

ENGINE

GASKETS

DRIVELINE

WHEELSTIRES &BRAKES

CHASSIS

INSTRUMENTS& GAUGES

GENERAL

CROSSREFERENCE

HANDCONTROLS

SHEETMETAL


INTAKE

APPAREL

Heavy-Duty Clutch Springs for Sportster ModelsFit Sportster and K models from 53-70. Set of 6.12162 Clutch springs, 53-70 (repl. OEM 38076-52) set of 6. . . . . . .$12.99

Heavy-Duty Clutch SpringsLong and skinny clutch springs for all 4-speed and 5-speed Big Twin models from 68-E84. Set of 10.15914 Replaces OEM 37077-68 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$24.99

High Performance Diaphragm Clutch SpringsClutch diaphragm springs for Big Twins from 90-97 and Sportster models from 91-Up.17445 Standard duty (repl. OEM 37871-90) . . . . . . . . . . . . . . . . . . . .$22.99

17446 Heavy-duty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$22.99

17445

Clutch Hub Nuts20047 For Big Twin models from 41-E84 (repl. OEMs 37496-41,

37496-65) sold each . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $4.99

56246 For Big Twin models from late 84-89 (repl. OEM 37496-84) sold each. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $3.99

17428 For Big Twin models from 90-97 (repl. OEM 37496-90) sold each . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $11.99

25307 Clutch hub nut seal (repl. OEM 12014) pack of 10 . . . . . . $1.00

Clutch Hub Nut Kit for Big Twins060724 Nut, seal and lock tab kit for Big Twins 41-E84 (repl. OEMs

37496-65, 12014 and 37503-41 . . . . . . . . . . . . . . . . . . . . . . . $9.99

Kibblewhite Clutch SpringsHeavy-duty race-proven clutch springs.

Sold as a Set of 10.55168 Fits all Big Twin models from 66-E84 (repl. OEM 38075-68)

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$36.99

622265 Fits all Big Twin models from 41-67 (repl. OEM 38077-41) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $34.99

http://www.cus/


10



Clutch Parts for Sportster Models from 71-E84Replacement clutch parts for Sportster models 71-E84. Listed in part number order.19774 Backing plate, clutch, 71-E84, Replaces OEM 38005-74. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $25.99

26740 Clutch hub nut, 67-E84 (repl. OEM 37527-67) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $5.99

030264 Throw-out bearing. Fits XL models 71-E84. Replaces OEM 9073 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $32.99

050095 Ratchet kit, kick starter. Fits Sportster models 71-79. Replaces OEM 33460-74 (includes OEM 8216 rivets (12), 33379-71A plate, 33432-73 gear and 37755-73 spacer) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $44.99

070015 Bearing, clutch hub. Fits XL models 71-E84. Replaces OEM 37722-71 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $25.99

070041 Spring set, heavy duty. Fits XL models 71-E84. Replaces OEMs 38080-71, 38079-72. Sold in pairs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $20.99

070083 Ring gear, starter drive. Fits Sportster models 67-80. Replaces OEM 33162-67 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $35.99

070302 Spacer, clutch stud (1.530” long). Fits XL models 74-E84. Replaces OEM 5995. Sold in pack of 6. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $2.25

070303 Spacer, clutch stud (-.040”). Fits XL models 74-E84. Replaces OEM 5996. Sold in pack of 6 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $2.33

070304 Spacer, clutch stud (-.080”). Fits XL models 74-E84. Replaces OEM 5997. Sold in pack of 6 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $2.25

070307 Retaining ring, drive plate. Fits XL models 71-E84. Replaces OEM 11053. Sold in 10 pack. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $2.10

070308 Collar, thrust bearing. Fits XL models 71-E84. Replaces OEM 37879-71. Sold each . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $13.49

070309 Adjuster screw. Fits XL models 71-E84. Replaces OEM 38130-71. Sold in 5 pack. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $4.20

070310 Nut, adjuster screw. Fits XL models 71-E84. Replaces OEM 7803. Sold in 5 pack . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $3.20

070507 Clutch drive plate, outer. Fits XL models 71-E84. Replaces OEM 37987-71. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $7.29

070307070507

070310

070309

030264 26740

19774

070041

070308

050095

070083

070015

070302

070303070304



SEATS &BAGS

FOOTCONTROLS

LIGHTING

ELECTRICAL

EXHAUST

ENGINE

GASKETS

DRIVELINE

WHEELSTIRES &BRAKES

CHASSIS

INSTRUMENTS& GAUGES

GENERAL

CROSSREFERENCE

HANDCONTROLS

SHEETMETAL


INTAKE

APPAREL

Clutch and Kickstart Parts for Sportster and K ModelsListed below in part number order and sold each unless otherwise noted.12082 O-ring, kickstart shaft, 54-79 (repl. OEM 11101) pack of 10

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $0.30

12162 Clutch springs, 53-70 (repl. OEM 38076-52) set of 6. . . . $12.99

12163 Spring cups, clutch, 54-70 (repl. OEM 38101-52T) set of 6 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $14.99

12248 Spring, chrome, kickstart shaft, 52-79 (repl. OEM 33084-41) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $10.99

19077 Seal, kickstart shaft, 54-79 (repl. OEM 33076-37) pack of 10 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $0.70

20065 Bushings, kickstart shaft, 54-79 (repl. OEM 33099-52A) sold in pairs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $7.99

20081 Bushing, starter ratchet, 57-E73 (repl. OEM 33442-57A) $19.99

25000 Screw, pushrod adjusting, 54-70 (repl. OEM 38130-54) . . $5.99

25322 Oil seal, clutch shell for late 57-66 XLH, XLCH, and 67-69 XLCH (repl. OEM 37740-57) Pack of 5. Price each. . . . . . . $1.20

25323 Oil seal, clutch hub for 67-70 XLH; 70 XLCH (repl. OEM 37741-67) Pack of 5. Price each. . . . . . . . . . . . . . . . . . . . . . . $1.60

25392 Locktab, starter crank gear, 54-79 (repl. OEM 33362-52) pack of 10 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $0.50

25395 Locktab, clutch hub nut, 54-E84 (repl. OEM 37533-52A) pack of 10 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $0.45

26063 Shaft, kickstart, 57-76 (repl. OEM 33094-57TA). . . . . . . . $19.99

26450 Clutch pushrod kit, 4-piece for 56-66 KH and XLH models, and 58-69 XLCH models (repl. OEMs 37276-53, 37279-56, 37281-47, 37282-53) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $25.99

26451 Clutch pushrod kit, 4-piece for 67-70 XLH and 70 XLCH (repl. OEMs 37276-53, 37280-67, 37281-47, 37282-53) . . . . . . . $30.99

26739 Clutch hub nut, 56-66 (repl. OEM 37526-56A). . . . . . . . . $12.99

26740 Clutch hub nut, 67-E84 (repl. OEM 37527-67) . . . . . . . . . . $5.99

26741 Nut, kicker shaft, 54-79 (repl. OEM 7926) . . . . . . . . . . . . . $6.00

050097 Ratchet spring, 54-79 (repl. OEM 33391-52) . . . . . . . . . . . $2.99

2008125322 25323

25395

26740

2673912163

12162

050097

25000

26450 26451

12248

20065

26063 26064

12082 19077

25392

26741

Heavy Duty Clutch Spring SetsFits all Sportster models from 71-E84. Sold in pairs.070041 Spring set, heavy duty. Fits XL models 71-E84. Replaces OEMs

38080-71, 38079-72. Sold in pairs . . . . . . . . . . . . . . . . . . . . $20.99

Clutch Ramp Bearing for Sportster ModelsFits all Sportster models from 84-90 (repl. OEM 8885).070020 Sold each . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $4.99

Clutch Hub Bearing for Sportster ModelsReplacement bearing for clutch hubs on Sportster models from 71-E84.070015 Bearing, clutch hub. Fits XL models 71-E84. Replaces OEM

37722-71 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $25.99

http://www.cus/


10



Transmission & Clutch - Big Boar V-Twin

Documents