CAROLINA TRAILERS & EQUIPMENT 10 Ton Gooseneck Standard Specifications Framework Mainframe: 10” @15 High Tensile Wide Flange I-Beam Crossmembers: 3” Channel Structural Steel on 16” Centers Flooring: Oak Stake PocketsRub Rails: (Optional D-Rings ) Ramps: 5’ Heavy Duty Tapered, Bar-Up, Fold Over Spring Loaded, Adjustable DoveTail: 5’ Self-Cleaning Angle Undercarriage Axles: 10,000# Dexter Tires: LT 235-85R 16 LRE 10-Ply Coupler: Adjustable Gooseneck 2 5/16” Jack: Dual Jacks Wheels: 16” 8 o Dimensions Deck: 20’ Flat Deck Width: 102” Over the Wheels More Specs Lighting & Wiring: Sealed Beam; DOT Approved Protected Wiring Breakaway Kit Optional Tool Box
49
Embed
Trailer: 12 Ton Gooseneck - Carolina Trailerscarolinatrailers.com/catalog/carolina_trailers_catalog.pdf · Trailer: 12 Ton Gooseneck 10 Ton Gooseneck Standard Specifications Framework
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
CAROLINA TRAILERS & EQUIPMENT
Trailer: 12 Ton Gooseneck
10 Ton Gooseneck
Standard SpecificationsFrameworkMainframe: 10” @15 High Tensile Wide Flange I-BeamCrossmembers: 3” Channel Structural Steel on 16” CentersFlooring: OakStake PocketsRub Rails: (Optional D-Rings )Ramps: 5’ Heavy Duty Tapered, Bar-Up, Fold Over Spring Loaded,
More SpecsLighting & Wiring: Sealed Beam; DOT Approved, Recessed and Rubber-MountedBreakaway KitOptional Tool BoxAdjustable Spring Perches (for Axle Adjustment)Optional LengthOptional Air BrakesChoice of Standard Colors
CAROLINA TRAILERS & EQUIPMENT
Dimensions:*Overall Length: 45’*Overall Width: 8' 6"*Load well Length: 24'*Load well Height: 24"Frame:*Main Beam: 16" at 67.*Cross Members: 8 " x 10 lbs. Per ft.*Side Rails: 12" Channel side rails.Rear Axle:2-25,000 lbs capacity axles.King Pin:3 1/2" heavy duty.Tires:8 each 255/70R x 22.5 "H" load range, steel belted radials.Wheels:8 each 8.25" x 22.5", 10 hole hub piloted steel disc wheels.Brakes:16.5" x 7" air brakes with spring parking brakes, automatic slack adjusters & ABS system.Suspension:Hutch 9700 4-Spring EqualizingFront Ramps:Front loading flip ramps with grousers.Rear Tail Section:Covered—TreadplateElectrical:12-Volt electrical system with standard 7 way SAE connector all lighting LEDsealed in rubber grommet mounting to DOT specifications.Hydraulics:Honda Self-Contained w/Switch over for Wet line hook-up.Decking:1 3/4" Rumber flooring, secured to frame with 5/16" self-taping torque screws.Tie Downs:12 Each 50 degree angled "D" ring tie downs 6 each side.Out Riggers:20 Each cast steel, lock-in-lock-out 10 each side with 2 extra planks.Finish:Sandblasted to near white, primed with 2 top coats, and choice of colors red, yellow, black, and white.
Dimensions:Overall Length: 49' 9 "Overall Width: 8' 6"Load well Length: 24'Load well Height: 20"Frame:Main Beam: 12" Fabricated, T-1 I-Beam with 3" camberCross Members: 8" & 4" on 12" centersSide Rails: 12" Fabricated, T-1 I-Beam with 3" camber.Rear Axles:3-25,000 lbs capacity axles (3rd axle lift)King Pin:2" heavy duty.Tires:12 each 255/70R x 22.5 "H" load range, PSI 120 KPA 830 steelbelted radials.Wheels:12 each 8.25" x 22.5", 10 hole hub piloted steel disc wheels.Brakes:16.5" x 7" air brakes with spring parking brakes, automatic slackadjusters andABS system.Suspension:Ridewell air ride suspension with height control valve.Front Ramps:Front loading ramps with grousers.Electrical:12-Volt electrical system with standard 7 way SAE connector all lighting LEDsealed in rubber grommet mounting to DOT specifications.Hydraulics:Wet line hook-up for tractor PTO operation.Decking:1 3/4" Rumber flooring, secured to frame with 5/16" self-taping torque screws.Outriggers:20 each cast steel lock-in-lock out 10 each side.Tie Downs:3/4" "D" ring tie downs.Finish:Sandblasted to near white, primed with 2 top coats, and choice of colors.
50 Ton, 3 Axle Detachable Gooseneck, Non-Ground Bearing Lowboy(Maximum Capacity 100,000#. Shipping Weight of 20,700 lbs. +/- 3%)
Available Options for 50-Ton Detach
• Available in Ground-Bearing.• Additional Lengths/Widths.• Gooseneck: Additional Swing Clearance.• Power Pack Hydraulics: 11hp-16hp
Honda, Combo Power Pack/Wet Line Kit.• Lockable Toolbox & Chain Storage.• Spare Tire & Wheel: 255/70 x 22.5 “H”.• Rear Deck: Steel Wheel Covers
or Rumber Covered.• Decking: Apitong, Oak & Pine.• Ramps: Hydraulic w/3’ Beaver Tail.• 4th Axle Flip, Air & Electrical.
CAROLINA TRAILERS & EQUIPMENT
Dimensions:Overall Length: 48' 6 "Overall Width: 8' 6"Load well Length: 24'Load well Height: 20"Frame:Main Beam: 12" Fabricated, T-1 I-Beam with 3" camber.Cross Members: 8" & 4" on 12" centersSide Rails: 12" Fabricated, T-1 I-Beam with 3" camber.Rear Axle:3-25,000 lbs capacity axles (3rd axle lift)King Pin:2" heavy duty.Tires:12 each 255/70R x 22.5 "H" load range,PSI 120 KPA 830 steel belted radials.Wheels:12 each 8.25" x 22.5", 10 hole hub piloted steel disc wheels.Brakes:16.5" x 7" air brakes with spring parking brakes,automatic slack adjusters and all wheel ABS system.Suspension:Air ride suspension with height control valve.Front Ramps:Front loading flip ramps with grousers.Electrical:12-Volt electrical system with standard 7 way SAE connector.all LED lighting sealed in rubber grommet mounting to DOT specifications.Hydraulics:Wet line hook-up for tractor PTO operation.Decking:1 3/4" Rumber flooring, secured to frame with 5/16" self-taping torque screws.Tie Downs:19 Each "D" ring tie downs 8 each side.and 3 on rear deck of trailer.Out Riggers:20 Each cast steel, lock-in-lock-out 10 each side.Finish:Sandblasted to near white, primed with 2 top coats, and choice of colors.
50 Ton, Flip Axle Detachable Gooseneck,Non-Ground Bearing Lowboy Trailer.
Length5,200# (or) 6,000# Capacity AxlesChoice of Standard Colors
CAROLINA TRAILERS & EQUIPMENT
6 TON EQUIPMENT TRAILER2 AXLE
FRAME WORKMain Frame 6” Channel 8.2# per FtCrossmembers (Main Frame) Bottom 5” Channel 5.4# per FtTilt Frame 6” Channel 8.2# per FtCrossmembers (Tilt Frame) 3” Channel 4.1# per Ft on 16” CentersDeck 2” x 8” OakFenders 10” Wide 1/8” Treadplate
UNDERCARRIAGE2 Axles 6000# 6 Lug EZ Lube TorflexBrakes 12” x 2” Electric, All WheelsTires 235 85R16 LR EWheels 6 Lug White Spoke Modular
DIMENSIONSLength 17’ StandardWidth 80 ½” Between FendersBed Height 26” from GroundHitch Adj Pintle or 2 5/16” Ball (or) 2” BulldogTongue Length 5’Trailer Weight 3500#Capacity 12000# GVWR at 50 mph w/ Even LoadHauling Capacity 8,000#
MISCELLANEOUSEight (8) 4” D-Rings 3/8” High Test Safety Chains10,000# Drop Leg Jack Breakaway System w/ BatteryDOT Approved Lighting Wiring in ConduitCompletely Primed and Painted w/ 2 Coats of Industrial Paint
FrameworkMainframe: 14” WF @ 26# per footCrossmembers: Pierced Through Frame, 4” WF 13 # per foot on 24” CenterSide Rails: 8” ChannelFlooring: 2” Treated OakRamps: 8” Channel, 5’ Fold-Over w/ Spring Assist
UndercarriageBrakes: Air w/ ABS and ParkTires: (8) 235-75 R 17.5 SBR 18 PR on (8) 17.5 Steel Disc WheelsAxles: (2) 22,500#; Oil BathSuspension: 9700 Hutch 4-Spring; Equalizing w/Adjustable Torque Arms
DimensionsLoad Deck Length: 22’Upper Deck: 9’ FlatSlope: 4’ with Traction CleatsDoveTail: 5’ Treated OakWidth x O/A Length: 102” W x 40’ LD-Rings: (6) per Side Heavy Duty Cupped Type More Specs
Electrical/Wiring: DOT Approved; All Sealed Wiring Harness; Mid-Span Turn Signals;Sealed Beam & Recessed & Rubber-Mounted LED Lighting
Jack: Dual 2-Speed Landing Gear: 160,000# Vertical Cap., 29,000# Side LoadDOT Conspicuity Tape: Full Length of TrailerFlag Holders: (4)Wide Load Flag HoldersTool Tray: In Upper DeckStep: (1) Driver’s Side StepFinish: Sandblasted, Primed and Painted Customer Choice of Standard Colors
AVAILABLE OPTIONS FOR THE 25 TON LOWBOY (Partial Listing)*Locking Under Body Toolbox(es) *Winch & Cable *Additional D-Rings*Tire/Wheel Combinations *Ratchet Track w/Sliding Winches *Recessed D-Rings in Floor*Alcoa Aluminum Wheels:(Inside Polished w/Nut Covers)
*Photos are representational only and may show available options.
10’
25’ 5’
9’ 4’ 22’ 5’
CAROLINA TRAILERS & EQUIPMENT
Dimensions:*Overall Length: 45’*Overall Width: 8' 6"*Load well Length: 24'*Load well Height: 24"Frame:*Main Beam: 16" at 67.*Cross Members: 8 " x 10 lbs. Per ft.*Side Rails: 12" Channel side rails.Rear Axle:2-25,000 lbs capacity axles.King Pin:3 1/2" heavy duty.Tires:8 each 255/70R x 22.5 "H" load range, steel belted radials.Wheels:8 each 8.25" x 22.5", 10 hole hub piloted steel disc wheels.Brakes:16.5" x 7" air brakes with spring parking brakes, automatic slack adjusters & ABS system.Suspension:Hutch 9700 4-Spring EqualizingFront Ramps:Front loading flip ramps with grousers.Rear Tail Section:Covered—TreadplateElectrical:12-Volt electrical system with standard 7 way SAE connector all lighting LEDsealed in rubber grommet mounting to DOT specifications.Hydraulics:Honda Self-Contained w/Switch over for Wet line hook-up.Decking:1 3/4" Rumber flooring, secured to frame with 5/16" self-taping torque screws.Tie Downs:12 Each 50 degree angled "D" ring tie downs 6 each side.Out Riggers:20 Each cast steel, lock-in-lock-out 10 each side with 2 extra planks.Finish:Sandblasted to near white, primed with 2 top coats, and choice of colors red, yellow, black, and white.
Standard SpecificationsFrameworkFlooring: 2” OakRear Deck: CoveredKingpin Setting: 18”
UndercarriageSuspension Hutch 9700Axles/Axle Track: 25,500# Tandem with Auto Slack Adjusters/ 77.5”Jack: 2-Spd Landing Gear, 50,000#Brakes: 16.5” x 7”Drums: OutboardTires: 255/70 R Low Profile RadialWheels: 10-Hole Budd
DimensionsLoad Deck Length: 24’ FlatDeck Height: 24”Overall Length 46 ft.Detach Neck 11’ Standard Non-Ground BearingWidth: 102”Outriggers: On 2’ CentersD-Rings: (10) per Side
More SpecsFinish: Sandblasted, Primed & Painted ThroughoutPower Unit Self-Contained Hydraulic
35 Ton Detach Lowboy
CAROLINA TRAILERS & EQUIPMENT
Standard SpecificationsFrameworkFlooring: 2” OakRear Deck: CoveredKingpin Setting: 18”
UndercarriageSuspension Hutch 9700Axles/Axle Track: 25,500# Tandem with Auto Slack Adjusters/ 77.5”Jack: 2-Spd Landing Gear, 50,000#Brakes: 16.5” x 7”Drums: OutboardTires: 255/70 R Low Profile RadialWheels: 10-Hole Budd
DimensionsLoad Deck Length: 24’ FlatDeck Height: 24”Overall Length 46 ft.Detach Neck 11’ Standard Non-Ground BearingWidth: 102”Outriggers: On 2’ CentersD-Rings: (10) per Side
More SpecsFinish: Sandblasted, Primed & Painted ThroughoutPower Unit Self-Contained Hydraulic
35 Ton Detach Lowboy
CAROLINA TRAILERS & EQUIPMENT
Standard SpecificationsFrameworkMainframe: 16 WF BeamCrossmembers: 6” I Beam on 24” CentersFlooring: 2” Nominal OakRamps: 5’ Fold-Over, Spring Assist,Bar-UpCoupler: KingpinDoveTail: 5’ Wood or Traction Cleat
UndercarriageAxles: (2) 25,000# Auto Slack AdjustersJack: 2-Spd Landing Gear, 50,000#Brakes: Air w/ABS & Park Brake on (1) AxleTires: (8) 255/70 R on 22.5
DimensionsLoad Deck Length: 28’ FlatUpper Deck: 10’ Standard WoodSlope: 5’ Wood (or) Traction CleatWidth: 102”Side Rails: 12” ChannelD-Rings: HD Cupped Type
More SpecsFinish: Sandblasted, Primed & Painted ThroughoutToolbox on Upper Deck
40 Ton Double-Drop LowboyAvailable in 25-50 Ton Models
with Optional Dimensions(length, width, neck design)
CAROLINA TRAILERS & EQUIPMENT
Dimensions:Overall Length: 49' 9 "Overall Width: 8' 6"Load well Length: 24'Load well Height: 20"Frame:Main Beam: 12" Fabricated, T-1 I-Beam with 3" camberCross Members: 8" & 4" on 12" centersSide Rails: 12" Fabricated, T-1 I-Beam with 3" camber.Rear Axles:3-25,000 lbs capacity axles (3rd axle lift)King Pin:2" heavy duty.Tires:12 each 255/70R x 22.5 "H" load range, PSI 120 KPA 830 steelbelted radials.Wheels:12 each 8.25" x 22.5", 10 hole hub piloted steel disc wheels.Brakes:16.5" x 7" air brakes with spring parking brakes, automatic slackadjusters andABS system.Suspension:Ridewell air ride suspension with height control valve.Front Ramps:Front loading ramps with grousers.Electrical:12-Volt electrical system with standard 7 way SAE connector all lighting LEDsealed in rubber grommet mounting to DOT specifications.Hydraulics:Wet line hook-up for tractor PTO operation.Decking:1 3/4" Rumber flooring, secured to frame with 5/16" self-taping torque screws.Outriggers:20 each cast steel lock-in-lock out 10 each side.Tie Downs:3/4" "D" ring tie downs.Finish:Sandblasted to near white, primed with 2 top coats, and choice of colors.
50 Ton, 3 Axle Detachable Gooseneck, Non-Ground Bearing Lowboy(Maximum Capacity 100,000#. Shipping Weight of 20,700 lbs. +/- 3%)
Available Options for 50-Ton Detach
• Available in Ground-Bearing.• Additional Lengths/Widths.• Gooseneck: Additional Swing Clearance.• Power Pack Hydraulics: 11hp-16hp
Honda, Combo Power Pack/Wet Line Kit.• Lockable Toolbox & Chain Storage.• Spare Tire & Wheel: 255/70 x 22.5 “H”.• Rear Deck: Steel Wheel Covers
or Rumber Covered.• Decking: Apitong, Oak & Pine.• Ramps: Hydraulic w/3’ Beaver Tail.• 4th Axle Flip, Air & Electrical.
CAROLINA TRAILERS & EQUIPMENT
Dimensions:Overall Length: 48' 6 "Overall Width: 8' 6"Load well Length: 24'Load well Height: 20"Frame:Main Beam: 12" Fabricated, T-1 I-Beam with 3" camber.Cross Members: 8" & 4" on 12" centersSide Rails: 12" Fabricated, T-1 I-Beam with 3" camber.Rear Axle:3-25,000 lbs capacity axles (3rd axle lift)King Pin:2" heavy duty.Tires:12 each 255/70R x 22.5 "H" load range,PSI 120 KPA 830 steel belted radials.Wheels:12 each 8.25" x 22.5", 10 hole hub piloted steel disc wheels.Brakes:16.5" x 7" air brakes with spring parking brakes,automatic slack adjusters and all wheel ABS system.Suspension:Air ride suspension with height control valve.Front Ramps:Front loading flip ramps with grousers.Electrical:12-Volt electrical system with standard 7 way SAE connector.all LED lighting sealed in rubber grommet mounting to DOT specifications.Hydraulics:Wet line hook-up for tractor PTO operation.Decking:1 3/4" Rumber flooring, secured to frame with 5/16" self-taping torque screws.Tie Downs:19 Each "D" ring tie downs 8 each side.and 3 on rear deck of trailer.Out Riggers:20 Each cast steel, lock-in-lock-out 10 each side.Finish:Sandblasted to near white, primed with 2 top coats, and choice of colors.
50 Ton, Flip Axle Detachable Gooseneck,Non-Ground Bearing Lowboy Trailer.
Standard SpecificationsFrameworkMainframe: 18” WF Beam @ 50# per footCrossmembers: 6” WF @ 12# per foot on 24” CentersFlooring: 2” Nominal OakRamps: 5’ Fold-Over, Spring Assist, Bar-UpCoupler: KingpinDoveTail: 5’ Wood or Traction Cleat
UndercarriageAxles: (3) 25,000# Dana Wide Track w/Auto Slack AdjustersJack: 2-Spd Landing Gear; Dual Jacks; 50,000 lb. CapacityBrakes: ABS & Park BrakeTires: (12) 255/70 R 22.5 Low ProfileWheels: 10-Hole Budd
DimensionsLoad Deck Length: 28 ‘ FlatUpper Deck: 10’ Standard WoodSlope: 5’ Wood or Traction CleatWidth: 102”Side Rails: 12” Channel @ 20# per footD-Rings: Heavy Duty Cupped Type
More SpecsElectrical: All Sealed Wiring Harness; All Rubber-Mounted LightsFinish: Sandblasted, Primed & Painted ThroughoutToolbox on Upper Deck, additional Tool Box, Driver’s Side
Available in 25-50 Ton Models with Optional Dimensions(length, width, neck design)
CAROLINA TRAILERS & EQUIPMENT
Trailer: 12 Ton Tag Paver
Standard SpecificationsFrameworkMainframe: 12” WF w/pierced crossmembersCrossmembers: 3” Channel on 16” CentersFlooring: 2” OakPintle Ring: AdjustableDoveTail: 6’ Wood
UndercarriageAxles: Tandem 10,000# Heavy Duty Dexter Oil BathRub Rails: With Stake Pockets or D-RingsBrakes: Electric (Air Brakes Optional)Tires: LT245-75R 16LR-EWheels: Budd 16” 80
DimensionsDeck Length: OptionalWidth: 102”Ramps 7’ x 36” Tapered Hydraulic (Up to 42” Wide)Jack: 12,000 lb. Drop Leg
More SpecsLighting: DOT Approved RecessedLocking Tool Box in Tongue(1) Driver’s Side StepHeavy-Duty Safety ChainPaint: Choice of Standard Colors
*Pictures shown are of a 24-Ton Tag Paver andare meant for representation purposes only.
CAROLINA TRAILERS & EQUIPMENT
Trailer: 15 Ton Tag Paver
Standard SpecificationsFrameworkMainframe: 12” I-Beam with Pierced CrossmembersCrossmembers: 4” ChannelFlooring: 2” OakRamps: 7’ x 36” Wide Hydraulic Tapered (optional 42” Wide)DoveTail: 6’ Wood
UndercarriageAxles: 12,000# Oil Bath Dual Tandem w/Springs & AdjustersBrakes: Electric (Air Brakes optional)Tires: LT 23585R16E RadialWheels: 8-Lugg Budd Style
DimensionsDeck Length: 24’Width: 102”RubRails: W/Stake PocketsHitch: Pintle Ring, AdjustableJack: 12,000 # Drop Leg
More SpecsLighting: DOT ApprovedLocking ToolTray in Tongue(1) Driver’s Side StepHeavy-Duty Safety Chain
Standard SpecificationsFrameworkMainframe: 14” @ 26# per footCrossmembers: 4” ChannelFlooring: 2” OakRamps: 7’ x 42” Hydraulic; Tapered with 2” Oak FlooringDoveTail: 2” Oak Flooring
UndercarriageAxles: (2) 25,000# Extra-Wide Oil BathBrakes: Air w/ABS and Park BrakeTires: 235-75R 17.5 18-PlyWheels: 17.5 10-Hole Steel Disc (Budd Style)
DimensionsDeck Length: 24’Width: 102”D-Rings: 8 per Side; Heavy-Duty CuppedJack: 2-Speed Drop Leg, 25,000# Capacity
More SpecsDOT Approved Lighting; Sealed Beam Recessed & Rubber MountedIn Conduit Wiring(1) Driver’s Side StepLocking Tool Box in TongueHeavy-Duty Safety Chain
Available OptionsLength Other Specs AvailableWidth Bi-Fold RampsWeight Twin Landing Gear
24 Ton Tag Paver
CAROLINA TRAILERS & EQUIPMENT
Trailer: 22.5 Ton Tag Paver
Standard SpecificationsFrameworkMainframe: 14” @ 26# per footCrossmembers: 4” ChannelFlooring: 2” OakRamps: 6’ x 42” Hydraulic; TaperedDoveTail: 6’ Wood
DimensionsDeck Length: 24’Width: 102”D-Rings: 8 per SideJack: 2-Speed
More SpecsLighting: DOT Approved; Sealed Beam Recessed & Rubber MountedWiring: In ConduitLocking Tool Box inTongue(1) Driver’s Side StepHeavy-Duty Safety Chain
CAROLINA TRAILERS & EQUIPMENT
Standard SpecificationsFrameworkMainframe: 14” @ 26# per footCrossmembers: 4” ChannelFlooring: 2” OakRamps: 7’ x 42” Hydraulic; Tapered with 2” Oak FlooringDoveTail: 6’ long with 2” Oak Flooring
UndercarriageAxles: (2) 25,000# Extra-Wide Oil BathBrakes: Air w/ABS and Park BrakeTires: 235-75R 17.5 18 PRWheels: 17.5 10-Hole Steel Disc (Budd Style)
DimensionsDeck Length: 24’Width: 102”D-Rings: 8 per Side; Heavy-Duty Cupped TypeJack: 2-Speed Drop Leg, 25,000# Capacity
More SpecsLighting: DOT Approved; Sealed Beam Recessed & Rubber MountedWiring: In Conduit(1) Driver’s Side Step Locking Tool Box in TongueHeavy-Duty Safety Chain Color: Customers Choice of Standard Colors
24 Ton Tag Paver
CAROLINA TRAILERS & EQUIPMENT
Trailer: 25 Ton Lowboy Paver
Standard SpecificationsFrameworkMainframe: 14” WF @ 26# per footCrossmembers: Pierced-Through Frame, 4” WF @ 13 # on 24” Center w/gussetsFlooring: 2” OakRamps: 8’ x 36” Hydraulic (optional 42” wide)DoveTail: 6’ Oak Floored
UndercarriageAxles: (2) 25,000 lb. Dana Wide TrackBrakes: Air w/ABS, Spring ParkTires: (8) 235-75R 17.5 SBR 18-PlyWheels: 17.5 10o
DimensionsLoad Deck Length: OptionalUpper Deck: 9’ (Standard) 2” Oak FlooredFront Slope: 5’ Wood or Optional Traction CleatWidth: 102”Side Rails: 8” ChannelD-Rings: (6) per SideJack: 2-Speed Landing Gear @ 50,000#
More SpecsDOT Approved; Sealed Beam & Rubber MountedLocking Tool Tray in Upper Deck(1) Driver’s Side StepHeavy-Duty Safety Chain
Picture goes here
9’
5’
CAROLINA TRAILERS & EQUIPMENT
FrameworkMainframe: 16” @ 40# per ft. WF Beam, Pierced; Arched; BridgedCrossmembers: 6” @ 12# per foot WF Beam, Full-Formed Gussets @ Inside Frame CrossmenbersSideRails: 12” ChannelFlooring: 2” Treated Oak, Secured with 3/8” Bolts, Floor Clips
Upper Deck: 9’ w/Treated 2” Oak FloorFront Slope: 5’ Wood (or) Steel w/Traction BarsDoveTail: 6’ Wood (or) Steel w/Traction BarsRamps: 11’ x 42” Bifold, w/ Tapered Ends; Hydraulic/Electric Power
Additional SpecsLighting: All DOT Approved; Sealed Wiring Harness w/Modular Connections;
Recessed & Rubber Mounted LED Lights; Mid-Span Turn SignalsLanding Gear: Dual 2-speed; 29,000# Side Load/160,000# Vertical LoadAccess Step: (1) Located on Driver SidePaint: Sandblasted, Cleaned, Primed & Painted w/Choice of Standard ColorsTool Tray: In Upper DeckD-Rings: Min. (8) per Side; Heavy Duty Cupped Type (or) Rub Rails w/Stake Pockets;
Wide Load Flag HoldersDOT ConspicuityTape:
Full Length of Trailer
AVAILABLE OPTIONS FOR THE 30 TON TRIAXLE PINTLE HITCH PAVER (Partial Listing)*Locking Under Body Toolbox(es) *Winch & Cable *Additional D-Rings*Tire/Wheel Combinations *Ratchet Track w/Sliding Winches *Recessed D-Rings in Floor*Alcoa Aluminum Wheels: Inside Polished w/Nut Covers
Pictures are for representational purposes only & may show optional equipment
CAROLINA TRAILERS & EQUIPMENT
Trailer: 50 Ton Paver
Standard SpecificationsFrameworkMainframe: 18” WF @ 50# per footCrossmembers: Pierced-Through Frame; 6” WF @12# per foot on 24” CentersFlooring: 2” Nominal OakRamps: 11’ x 42” Hydraulic BifoldDoveTail: 6’ Oak Floor
UndercarriageAxles: (3) 25,000 lbs DanaBrakes: Air w/ABS & Spring Park on (1) AxleTires: (8) 255/70R 22.5 Low ProfileWheels: 22.5 10-Hole Steel Disc
DimensionsLoad Deck Length: 28’Upper Deck: 10’ Standard WoodSlope: 5’ Wood or Optional Traction CleatWidth: 102”Side Rails: 12” @ 20# per footD-Rings: (10) per SideJack: 2-Speed Landing Gear; Dual Jacks; 50,000 lb. Capacity
More SpecsLighting: DOT Approved; Sealed Beam & Rubber MountedTool Tray in Upper Deck(1) Driver’s Side Step
CAROLINA TRAILERS & EQUIPMENT
10 Ton Tag
Standard SpecificationsFrameworkMainframe: 10” WF I-Beam @15#/ftCrossmembers: 3” Channel on 16” CentersFlooring: 2” OakRamps: 5’ Fold-Over, Spring Assisted, Bar-UpDoveTail: 5’ Self-Cleaning Angle or Wood (optional hinge-up)
DimensionsLength: 25’ OverallBed: 20’ (optional footage available)Height: 35” (unloaded)RubRails: W/Stake PocketsJack: (1) 12,000 # Drop Leg
More SpecsLighting: DOT Approved; Recessed & Rubber-Mounted(1) Driver’s Side StepOpen Tool Tray in TongueHeavy-Duty Safety ChainSandblasted, primed, painted your choice standard colors
CAROLINA TRAILERS & EQUIPMENT
12 Ton Paver(Shown w/Pierced Frame)
STANDARD SPECIFICATIONSFrameworkMainframe: 10” WF @ 17#Crossmembers: 3” Channel on 16” CentersFlooring: 2” Treated OakPintle Ring: Adjustable HeightRub Rails: With Stake Pockets (or) D-Rings
UndercarriageAxles: Tandem 10,000# Heavy Duty Dexter Oil BathBrakes: Electric—All WheelsTires: (8) ST235/851/R16E 10PRWheels: (8) Steel Disc (Budd Style)
DimensionsDeck Length: 20’Width: 102”Ramps: 7’ x 36” Tapered Hydraulic (Up to 42” Wide—Up to 8’ in Length);
12VDC Electric/Hydraulic Power SourceDoveTail: 6’ Wood
More SpecsLighting: LED w/Midspan Turn SignalsWiring: Sealed Wiring Harness w/Modular ConnectionsJack: Single 2 Speed; Semi-Type (No Drop Leg)Locking Tool Box in Tongue(1) Driver’s Side StepHeavy-Duty Safety ChainPaint: Choice of Standard Colors
Pictures are for representational purposes only and may show additional options.
CAROLINA TRAILERS & EQUIPMENT
12 Ton Tag
Standard SpecificationsFrameworkMainframe: 10” WF High Tensile I-Beam @15#/ft
(Optional 12” @ 16#/ft w/Pierced Crossmembers)Crossmembers: 3” Channel on 16” CentersFlooring: 2” OakRamps: 5’ Fold-Over, Spring Assisted, Bar-Up, w/ Tapered EndsDoveTail: 5’ Self-Cleaning Angle or Wood (optional hinge-up)
UndercarriageHitch: Pintle Ring, AdjustableBrakes: Electric all Wheels (Air Brakes optional)Tires: LT 24585R 16LR-EWheels: 8 Hole HD Steel DiscAxles (2) 10,000# Oil Bath
More SpecsLighting: DOT Approved; Recessed & Rubber-Mounted(1) Driver’s Side StepLocking Tool Tray in TongueHeavy-Duty Safety ChainSandblasted, primed, painted your choice standard colors
CAROLINA TRAILERS & EQUIPMENT
Trailer: 15 Ton Tag
Standard SpecificationsFrameworkMainframe: 14” I-Beam with Pierced CrossmembersCrossmembers: 4” Channel on 16” CentersFlooring: 2” OakRamps: 5’ Spring Assist Bar-Up Fold-OverDoveTail: 5’ Self-Cleaning Angle Iron [For 5’ Wood, deduct $100.00]
Recessed & Rubber Mounted LED Lights; Mid-Span Turn SignalsLanding Gear: 2-Spd. Dual Landing Gear: 29,000# Side Load/160,000# Vertical CapacityD-Rings H. D. Cupped Type; Min. (8) each SideAccess Step: (1) Located on Driver SideSafety Chains (2) Heavy DutyTool Box Locking Tool Box in TongueColor Sandblasted, Cleaned, Primed, Painted Choice of Standard Colors
AVAILABLE OPTIONS FOR THE 24/25 TON PINTLE HITCH PAVER*Locking Under Body Toolbox(es) *Winch & Cable *Additional D-Rings*Tire/Wheel Combinations *Ratchet Track w/Sliding Winches *Recessed D-Rings in Floor*Alcoa Aluminum Wheels: Inside Polished w/Nut Covers
Recessed & Rubber Mounted LED Lights; Mid-Span Turn SignalsLanding Gear: 2 Speed Dual Landing Gear: 29,000# Side Load/160,000# Vertical CapacityD-Rings: H. D. Cupped Type; Min. (5) each Side (or) Stake Pockets on 24” CentersAccess Step: (1) Located on Driver SideSafety Chains (2) Heavy DutyTool Box Locking Tool Box in TongueColor Sandblasted, Primed, Painted Customer Choice of Standard Colors
AVAILABLE OPTIONS FOR THE 24/25 TON PINTLE HITCH (PARTIAL LISTING)*Locking Under Body Toolbox(es) *Winch & Cable *Recessed D-Rings in Floor*Tire/Wheel Combinations *Ratchet Track w/Sliding Winches *Air Ride Suspension*Alcoa Aluminum Wheels: Inside Polished w/Nut Covers
MISCELLANEOUS• (14) Bent D-Rings ½” High Test Safety Chains• DOT Approved Lighting, Wiring in Sealed Wiring Harness• Completely Primed and Painted Choice of Standard Colors• Heavy Duty Fold Over Ramps/Spring Assist• Stone Guards on Lights, Sealed Beam Lights, Mud Flaps
PLEASE CONTACT US FOR OPTIONS AND PRICING
CAROLINA TRAILERS & EQUIPMENT
Trailer: 7 Ton Tag Between The Wheels
Standard SpecificationsFramework
Mainframe: 6”Crossmembers: 3” Channel on 16” CentersRamps: 3” Channel, 5’ Pin-Up TaperedFlooring: 11-Gauge Tread PlateDeck Length Flat: 18’ (16’Flat With 2’ Slope)Fenders: Heavy Duty Tread Plate
Brakes: ElectricTires: 16” 1- Ply RadialsWheels: White WheelsJack: 10,000# Drop Leg
Dimensions
Width: 102” (81” Between The Wheels)Lights and Wiring: DOT ApprovedBed Height: 22”Hitch: Adjustable Pintle Hitch
CAROLINA TRAILERS & EQUIPMENT
Trailer: 7 Ton Over The Wheel
Standard SpecificationsFramework
Mainframe: 10” @ 12 # per ft WF BeamCrossmembers: 3” Channel on 16” CentersFlooring: Pressure Treated Pine (or) 2” OakSiderails: 6” Channel w/Stake Pockets every 2’Ramps: 3” Channel; 5’ Long Bar-Up, Fold overDovetail: 5’ Self-Cleaning Angle or Wood
Undercarriage
Axles: (2) 7,000# DexterBrakes: (2) ElectricTires: (4) 235-85R 16 10plyWheels: 16” 8 LugJack: 12,000# Drop Leg
Dimensions
Deck Length: 20’ FlatWidth: 102” Over The WheelHitch: Adjustable Pintle RingLighting & Wiring: DOT ApprovedBreakaway Kit : W/Out Charger
Trailer shown may have available options.
CAROLINA TRAILERS & EQUIPMENT
Trailer: 6-Ton (Skidsteer)
Standard SpecificationsFramework
Mainframe: 6 x 4 x 3/8” AngleCrossmembers: 3” Channel on 24” CentersRamps: 3” Channel, 5’ Long Pin-Up w/Tapered Ends; Adjustable WidthFlooring: 11-Gauge Tread PlateDeck Length Flat: 16’ (14’ + 2’ Slope)Width: 82” Inside Fenders: 102” Overall
Undercarriage
Coupler: Adjustable Height Pintle Ring (or) 2 5/16” BallFenders: 10 ½ x 72 Tread Plate (or) 2” OakTires: (4) 235/R16E 10-Ply SBRWheels: (4) 16” 6o Drop or StraightBrakes: (1) ElectricJack: 7K# Drop LegAxles: (2) 6K 6o Drop or StraightWiring: DOT Approved; Breakaway Kit w/7-Way PlugLights: All Rubber-Mounted
Options
LengthUpgrade to 7K AxlesElectric Brakes (2) AxlesChoice of Standard Paint Colors
CAROLINA TRAILERS & EQUIPMENT
Trailer: 12 Ton Tilt
Standard SpecificationsFramework
Mainframe: 10” I Beam @ 15# per FootTilt Bed: 10” Channel; Hydraulic TiltCrossmembers: 3” on 16” CentersFlooring: 2” OakCylinders: (2)Side Rails: 6” Channel
Undercarriage
Axles: (2) 10,000 #Brakes: Electric ( Air Optional)Tires: 235/85R16EWheels: 16” Steel Disc, 8o
Dimensions
Length: 24’ (4’ stationary + 20’ flat)Width: 102”Bed Height: 36”Hitch: Adjustable PintleTongue Length: 6’Jack: (2) Single SpeedRub Rails: With Stake PocketsTool Tray: In Tongue w/ Lid
CAROLINA TRAILERS & EQUIPMENT
Standard Specifications
FrameworkMainframe: 12” @ 30# per ft WF BeamCrossmembers: 4” Channel on 16” CentersBed: 12” @ 30# WF (Tilt Frame)Bed Crossmembers (Tilt): 4” Channel on 16” CentersFlooring: 2” Oak
UndercarriageJack: 25,000# Drop Leg, 2-SpeedAxles: (2) 22.5 K Air with ABS & Spring Lock on (1) AxleD-Rings: 5 per side—Heavy Duty CuppedTires: (8) 235 x 75R 17.5 18-Ply (or) 255/70R 22.5Wheels: 17.5 (or) 22.5 Steel Disc
Other SpecsTool Tray in Tongue with LidLighting: DOT Approved, Sealed System
Trailer: 22.5 Ton TiltPicture shown may show additional options.
Picture shown is 24 ton tilt.
CAROLINA TRAILERS & EQUIPMENT
25 Ton Tilt
Standard SpecificationsFrameworkTrailer Mainframe: 10” @ 30# per ft WF BeamTilt Deck Frame: 12” @ 30# per ft WF BeamCrossmembers(Stationary Deck)
4” Channel on 16” Centers
Crossmembers(Tilt Deck)
3 x 3 x ¼” Square Tube w/Gussets
Flooring: 2” Treated Oak w/Treadplate over AxlesUndercarriageLanding Gear: Dual 2-Speed —160,000# Vertical Capacity; 29,000# Side CapacityAxles: (2) 25,000#, Wide Track,,with ABS & Park BrakeD-Rings: Min. 6 per Side, H.D. Cupped TypeTires: (8) 235 x 75R 17.5 18-PRWheels: (8) 17.5 Steel DiscDimensionsLength: 24’ Tilt DeckWidth: 102”Hitch: Adjustable – 4 Bolt, 3” Pintle Ring, 100K Cap.Tongue Length: 5’Other SpecsLocking Tool Tray in TongueDriver’s Side StepWide Load Flag HoldersLighting: DOT Approved, All Rubber-Mounted, Recessed, w/ LED Lighting, Mid-Span Turn SignalsElectrical: All Sealed Wiring Harness w/Modular ConnectionsPaint: Sandblasted, Primed, and Painted Customer’s Choice of our Standard Colors
AVAILABLE OPTIONS FOR THE 25 TON TILT*Locking Under Body Toolbox(es) *Winch & Cable *Additional D-Rings*Tire/Wheel Combinations *Ratchet Track w/Sliding Winches *Recessed D-Rings in Floor*Alcoa Aluminum Wheels: Inside Polished w/Nut Covers
Standard SpecificationsFrameworkMainframe: 10” I Beam @ 15# per FootCrossmembers: 3” on 16” CentersBed: 10” ChannelBed Crossmembers: 3” Channel on 16” CentersDeck: OakCylinders: (2) 2 ½” x 16” HydraulicSide Rails: 6” Channel @ 8.1# per Foot
UndercarriageAxles: (2) 7,000# EZ LubeSuspension: 4-Spring, Heavy-Duty Slipper Type SpringsBrakes: ElectricTires: 245 75R 16 Radial 10 PlyWheels: 16” 8o
DimensionsOverall Length: 25’Bed Length: 20’ Bed, Full Length TiltWidth: 102”Bed Height: 36” UnloadedHitch: Adjustable PintleTongue Length: 5’Jack: (2) Single SpeedRub Rails: With Stake PocketsStorage Tray: In Tongue w/ Lid
Photo is for illustration purposes only. Trailer pictured may show optional equipment.