Traffic Wax Solvent-based wood floor wax. Description Solvent-based wax for the cleaning and maintenance of sealed, oiled and unsealed wood and cork floors. Key properties Well balanced cleaner/maintainer based on hard waxes and solvents Very effective on solvent based soiling Buffable protective film Benefits Protects against humidity in the grouts (especially pre-varnished parquet) and from premature wear Scuff marks, tar, oil and grease can efficiently be removed when using a spray method • Provides an attractive glossy shine Use instructions Dosage: The product is ready to use. Apply undiluted. Application: Full surface cleaning/maintenance Initial treatment: For sealed wood add the product into the spray device of a single disc machine, equipped with red pad, and spray clean the floor. For unsealed wood apply one thin coat with a polish applicator. Allow to dry, then immediately buff. Unsealed wood floors may require a second coat. Apply the second coat only when first coat is completely dry. After the floor has dried, buff the entire area with a white or red pad to densify the film. Spray cleaning: Add the product into the spray device of a single disc machine, equipped with an appropriate pad, and spray clean the floor. After a short drying time, buff the whole surface for a more uniform appearance/gloss level. Spot cleaning/maintenance Add the product into the spray device of a single disc machine, equipped with an appropriate pad, and spray clean the floor by spraying only on spots/soiled areas. After a short drying time, buff the whole surface for a more uniform appearance/gloss level. Stripping Spray clean the surface with CAREFREE Solve and a single disc machine, equipped with a blue pad. Important: Shake well before use. Do not store or use a temperatures below 5 C. Bring the product to room temperature (open container and set container in warm water) before use. Do not use on solvent sensitive floors (e.g. rubber, asphalt, asphalt tile). Cloths soiled with the product are inflammable.