11/9/13 Traffic Spikes | One Way Traffic Spikes | Tiger Teeth Traffic Controllers www.barriergatearm.com/Traffic-Spikes.html 1/5 (520)780-9751 barriergatearm.com Home About Us Contact Us Barrier Gates Manual Rising Barrier Gate Arm Traffic Spikes Automatic Spike Systems Vehicle Detection Loops Photo Eye Beam Speed Bumps | Humps We also sell replacement barrier gate arms, and replacement parts for barrier gate arm operators. [email protected]Barrier Gate Arm Operators Traffic Spikes Traffic spikes are ideal for controlling traffic direction and speed through a controlled entry/exit location or parking lot. Traffic spikes prevent vehicles from proceeding through a traffic lane in the wrong direction by enforcing one-way traffic lane direction. Often referred to as Tiger Teeth Traffic Controllers. Every Traffic Spike Product on this page is Made in the USA! Model RB-36 Latch Down Mechanism Included Surface Mount Application The directional spike system is used to control traffic in one direction. Vehicle may enter, but not exit without severe tire damage. Spring loaded spikes remain up and easily go down when vehicles pass over the system in the correct direction; however, if passing over it in the opposite (incorrect) direction, all tires will be sliced. • Surface mounted spike system also serves as a speed bump to slow down the flow of traffic. • Easily installed to the existing roadway. • No excavating or asphalt cutting is required. • Low profile for smooth passage. • Fabricated in 3 Ft.sections to customize lane width. • All welded construction. • 1/4" thick hot rolled steel for "lasting durability". • Color: Traffic safety red for easy visibility. Road Blade™ Tiger Teeth Directional Traffic Control Spikes Replacement Torsion Springs for Spikes Warning signs must be used with traffic spikes to warn drivers that a one-way traffic lane condition exists. Speed bumps should always be used with traffic spikes. Speeds in excess of 5-MPH over the spikes can cause tire damage or damage to spike systems. Don't forget to call for your discount for quantity, contractors, military, church, school and other discounts you may qualify for. No obligation cost estimate can be emailed to you today! (520)780-9751 or [email protected]Affordable Price! Durable Coating with non slip traction grit The Winter Season is coming soon! Be sure to ask about a stainless steel snow and ice melt cable system for your spikes. Works with any of our spikes and is 22" X 28" High Preformance Epoxy Coating in Safety Red or Safety Yellow →Maximum corrosion protection →Superior long-term solvent, chemical, and abrasion resistance →Outstanding impact resistance Call to confirm which brand/model of spikes you need springs for. Phone (520)780-9751 Road Blade Surface Mount / Tiger Teeth Directional Traffic Control Spikes
5
Embed
Traffic spikes one way traffic spikes tiger teeth traffic controllers
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
11/9/13 Traffic Spikes | One Way Traffic Spikes | Tiger Teeth Traffic Controllers
www.barriergatearm.com/Traffic-Spikes.html 1/5
(520)780-9751barriergatearm.com
Home
About Us
Contact Us
Barrier Gates
Manual Rising Barrier Gate Arm
Traffic Spikes
Automatic Spike Systems
Vehicle Detection Loops
Photo Eye Beam
Speed Bumps | Humps
We also sellreplacementbarrier gatearms, andreplacementparts forbarrier gatearm operators.
Traffic SpikesTraffic spikes are ideal for controlling traffic direction and speedthrough a controlled entry/exit location or parking lot. Traffic spikesprevent vehicles from proceeding through a traffic lane in thewrong direction by enforcing one-way traffic lane direction.Often referred to as Tiger Teeth Traffic Controllers.
Every Traffic SpikeProduct on this pageis Made in the USA!
Model RB-36 Latch Down Mechanism IncludedSurface Mount ApplicationThe directional spike system is used to control traffic inone direction. Vehicle may enter, but not exit withoutsevere tire damage. Spring loaded spikes remain up andeasily go down when vehicles pass over the system inthe correct direction; however, if passing over it in theopposite (incorrect) direction, all tires will be sliced.
• Surface mounted spike system also serves as aspeed bump to slow down the flow of traffic.• Easily installed to the existing roadway.• No excavating or asphalt cutting is required.• Low profile for smooth passage.• Fabricated in 3 Ft.sections to customize lane width.• All welded construction.• 1/4" thick hot rolled steel for "lasting durability".• Color: Traffic safety red for easy visibility.
Road Blade™ Tiger Teeth Directional Traffic Control Spikes
ReplacementTorsion Springsfor Spikes
Warning signs must be used with traffic spikes to warndrivers that a one-way traffic lane condition exists. Speed bumps should always be used with traffic spikes.Speeds in excess of 5-MPH over the spikes can cause tiredamage or damage to spike systems.
Don't forget to call for your discount for quantity, contractors, military, church,school and other discounts you may qualify for. No obligation cost estimate canbe emailed to you today! (520)780-9751 or [email protected]
Affordable Price!
Durable Coatingwith non sliptraction grit
The Winter Season iscoming soon!Be sure to ask about astainless steel snow andice melt cable system foryour spikes. Works withany of our spikes and is
22" X 28"
High Preformance Epoxy Coating in Safety Red or Safety Yellow
11/9/13 Traffic Spikes | One Way Traffic Spikes | Tiger Teeth Traffic Controllers
www.barriergatearm.com/Traffic-Spikes.html 2/5
COBRA™ Surface Mount TrafficSpike System
3’(914.4 mm) Section¼” Hot Rolled Steel Top Plate
KING COBRA™ Surface MountedHeavy DutyTraffic Spike System
COBRA™ & KING COBRA ™Replacement Parts
COBRA™ In Ground/Flush MountTraffic Spike System
COBRA™ & COBRA HD™Replacement Parts
3’ (914.4 mm) Section3/8” Hot Rolled Steel Top Plate
Stainless Steel Springs, Teeth, &Latch Down Assemblies, End BevelCap Set and much more
3’ (914.4 mm) OR 6’ (1828.8 mm)1/4" Top Plate
Teeth, Torsion Springs, BearingBlocks & Latch Down Assemblies
COBRA HD™ Heavy Duty InGround/Flush Mount Traffic SpikeSystem
3’ (914.4 mm) Section3/8″ Top Plate
RB-72 or 72LD(Latching) Directional traffic controllerFlush Mount ApplicationThe flush mount directional spike system offers thesame features as the surface mount; however, it isdesigned to sit flush with the road surface. Thissystem is ideal for permanent installations.
• System is installed flush with the road surfacefor a low profile, allowing smooth passage.• Easily installed to the existing or newly constructedroadway.• Minimal excavating or asphalt cutting is required.• Low profile for smooth passage.• Fabricated in 3 Ft.sections to customize lane width.• All welded construction.• 1/4" thick hot rolled steel for "lasting durability".• Color: Traffic safety red for easy visibility.
COBRA Traffic Spikes
1610 Series Directional Traffic Control Spikes
Flush Mount Traffic Spikes
This is one design that has been popular foryears in the traffic spike industry. It is oftenrenamed and copied by others. Some of thenames are Tiger Teeth, TT36, TT72, etc. TheRB-36 & RB-72 traffic spike is made in theUSA.
HEAVY AXLE LOAD RATED
HEAVY AXLE LOAD RATED
controlled by a digitalthermostat.
Road Blade In Ground / Tiger TeethDirectional Traffic Control Spikes
11/9/13 Traffic Spikes | One Way Traffic Spikes | Tiger Teeth Traffic Controllers
www.barriergatearm.com/Traffic-Spikes.html 3/5
Traffic control spikes are ideal for controlling traffic direction and speed through a controlled entrylocation or parking lot.
Traffic spikes prevent vehicles from proceeding through a traffic lane in the wrong direction byenforcing one-way traffic lanes.
Flush mount spikes and surface mounted spikes are available with Spring Retraction or WeightedRetraction. Counter Balance or Counter Balance with a Spring Assist
Individual spring loaded spikes.
Stainless steel springs.
Weight spikes (no springs) version available.
Lock-down version available.
Flush in-ground unit.
Painted bright red for easy visibility.
Ideal to enforce one-way traffic.
Dimensions: 6.5"H x 12.5"W x 72"L.
Warning signs must be used with traffic spikesto warn drivers that a one-way traffic lanecondition exist. Speed bumps should always be used with
traffic spikes. Speeds in excess of 5-MPHover the spikes can cause tire damage.
Surface Mount Traffic Spikes
Spikes sections available in 3-foot sections.
End caps provide a smooth end to the spike section.
Torsion springs.
Lock-down standard.
Surface mount unit.
1/4-inch diamond plate painted bright yellow for easy visibility.
3-inch rise provides a built-in speed bump.
Dimensions: 3"H x 31"W x 36"L.
Warning signs must be used with trafficspikes to warn drivers that a one-waytraffic lane condition exist.
Speed bumps should always be usedwith traffic spikes. Speeds in excess of 5-MPH over the spikes can cause tiredamage.
Minnesota · Mississippi · Missouri · Montana · Nebraska · Nevada · New Hampshire · New Jersey · New Mexico ·New York · North Carolina · North Dakota · Ohio · Oklahoma · Oregon · Pennsylvania · Rhode Island · South Carolina ·
South Dakota · Tennessee · Texas · Utah · Vermont · Virginia · Washington · West Virginia · Wisconsin · Wyoming
Surface Mounted Traffic Spikescan be glued to the road surfacewith a construction grade epoxyor they can be anchored withbolts to the road surface
It is the end users responsibility to check with local authorities forpermission to use traffic spikes for their intended use.
Are you in Tucson, Arizona? Need installation? We offer installation of ourproducts by a licensed, bonded and insured contractor.
Not in Tucson? No problem, we know an installer in your area that can help.