This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
Trade Show
Automechanika Messe Frankfurt 2012
Sep. 11 - Sep 16, 2012
Messe Frankfurt GmbH Fair Ground, Germany
Hall 9.2 Booth No. G19
AAPEX 2012
October 30 - November 1, 2012
Sands EXPO Center, Las Vegas, NV, USA
Tool and Equipment Section, Booth No. 668 We look forward to greeting you there!
Latest Versions (September, 2012)
Software Version Language Release date
BMW CODING 2012.07 USEN/TWCH/JPJP 2012/8/1
BMW DIAG E SERIES 2012.06 USEN/TWCH/JPJP/KRKR 2012/7/13
BMW DIAG F SERIES 2012.06 USEN/TWCH/JPJP/KRKR 2012/7/13
Next, a series of adaptation will be performed to finish service reset, please following the procedure to modify each adaptation value. For any adaptation you don't want to modify, press EXIT to jump to next adaptation.
18
Oil quality - 17
old value::::00002 new value::::00002
Value range::::1-2
ENTER: Confirm input
19
Oil quality - 17
old value::::00002 new value::::00002
Value range::::1-2
ENTER: Confirm Adaptation
20
Minimum value mileage - 17
old value::::0001500km new value::::0001500km
21
Minimum value mileage - 17
old value::::0001500km new value::::0001500km
10.Select Maximum value mileage, press EXIT for no change.
(This step is same as channel (43) Maximum value mileage.)
11.Select Maximum time interval, press EXIT for no change.
(This step is same as channel (44) Maximum time interval.)
12.Select Minimum time interval, press EXIT for no change.
(This step is same as channel (49) Minimum time interval.)
ENTER: Confirm input
ENTER: Confirm Adaptation
22
Maximum value mileage - 17
old value::::0003000km new value::::0003000km
ENTER: Confirm input
23
Maximum value mileage - 17
old value::::0003000km new value::::0003000km
ENTER: Confirm Adaptation
24
Maximum time interval - 17
old value::::00756 days new value::::00756 days
ENTER: Confirm input
25
Maximum time interval - 17
old value::::00756 days new value::::00756 days
ENTER: Confirm Adaptation
26
Minimum time interval - 17
old value::::00372 days new value::::00372 days
27
Minimum time interval - 17
old value::::00372 days new value::::00372 days
13.Both Distance from inspection and Time from inspection show 00000 for
service reset completed, press EXIT to next step. (This step is same as
channel (40) Distance from inspection and channel (41) Time from inspection.)
14.Service reset completed
3. AUDI 2008~Service Reset for following vehicles Audi A3, S3, RS3 (from MY08)
Audi A4, S4, RS4 (from MY08)
Audi A5, S5, RS5 (from MY08)
Audi TT, TTS, TTRS (from MY08)
Audi Q5 (from MY08)
Audi A6, S6, RS6 (from MY09)
Audi Q7 (from MY09)
Audi R8 (from MY09)
ENTER: Confirm input
ENTER: Confirm Adaptation
28
Distance from inspection–
17
old value::::0000000km new value::::……………………. 00km
29
Time from inspection - 17
old value::::00000 days new value::::………days
30
Service reset entry - 17
Service reset completel Press EXIT back to menu
On Audi 2008 and newer model, the service reset indicator will display on instrument
panel and audio panel. And, you can see next service interval and mileage on audio panel.
The difference between old model and these newer models is mileage counting.
There are 2 ways of mileage count: one is oil mileage, and the other is maximum value
mileage. Please do oil reset for both mileage count separately.
1. To reset oil time and mileage, please enter channel number 02, no matter the old value
is
00001 or 00000, please input new value 00000 to reset oil service.
2. To reset maximum value mileage, please enter channel number 53
(distance from inspection) and 55 (time from inspection), then input new value 00000
to reset time and distance from inspection.
Example 1: Year 2011 AUDI A4 Procedure of service reset on iSCAN-IIwt: 1.Select Vehicle Diagnostic -> EUROPEAN
2.Select VW AUDI SEAT SKODA
1
Main Menu ����
2 Component Test System (External Modules) 3 IMS2 (Interface Module Simulation System) 80 OBD- II Standard Compliant Diagnostics 82 DOL Mode (Diagnostic On-Line)
1 Vehicle Diagnostic
2
Vehicle Diagnostic
1 AMERICAN
3 ASIAN
2 EUROPEAN
3.Select AUDI -> Audi A4, S4, RS4
4.Please select quick service and follow the instruction step by step.
Do not need to select channel number, just input new value for change or press
EXIT for no change.
3
EUROPEAN �
1 MERCEDES-BENZ 2 FIAT LANCIA ALDA 3 OPEL VAUXHALL
5 BMW PKG 6 LANDROVER 2012.01 USEN 7 RENAULT 2011.12 USEN 8 PORSCHE 2012.05 USEN
4 VW AUDI SEAT SKODA
4
VW AUDI SEAT SKODA
1 VASS
2012.05 USEN
5
VASS
1 VOLKSWAGEN
3 SEAT
4 SKODA
5 Bentley
2 Audi
6
Type selection
1 Audi A1
2 Audi A2
3 Audi A3.S3.RS3
5 Audi A5.S5.RS5
6 Audi Cabriolet
7 Audi A6.S6.RS6
8 Audi A7.S7
9 Audi A8.S8
10 Audi Q5
11 Audi Q7
12 Audi R8
4 Audi A4.S4.RS4
7
Function Select
1 Whole System Search 2 Individual System Search
3 Quick Service
8
Quick Service
2 Particle filter emergency
regeneration
3 Elec. Parking brake pads change
4 Throttle Body Alignment
1 Service reset
5.Select Oil quality, press EXIT for no change.
(This step is same as channel (45) oil quality.)
6.Maximum value mileage , press EXIT for no change.
(This step is same as channel (43) Maximum value mileage.)
7.Maximum time interval, press EXIT for no change.
(This step is same as channel (44) Maximum time interval.)
8.Input new value 00000 to reset next inspection distance.
9
Adaptation - 17
2 Others
1 Service reset for following
vehicles:
Audi A3, S3, RS3 (from MY08)
A4, S4, RS4 (from MY08)
A5, S5, RS5 (from MY08)
TT, TTS, TTRS (from MY08)
Q5 (from MY08)
A6, S6, RS6 (from MY09)
Q7 (from MY09)
R8 (from MY09))
10
Adaptation - 17
Current oil quality Long life Please choose one mode between fixed interval and flexible interval (Longlife)
1 Fixed interval
2 Long life
11
Maximum value mileage - 17
old value::::0015000 km new value::::………….. 000 km
12
Maximum value mileage - 17
old value::::0015000 km
new value::::0015000 km
ENTER: confirm input
13
Maximum time interval - 17
old value: : : : 00365 new value: : : : …….
Increments: 1 = 1 day(s)
14
Maximum time interval - 17
old value: : : : 00365
new value: : : : 00365
Increments: 1 = 1 day(s)
ENTER: confirm input
(This step is same as Channel number (53) distance from inspection.)
9.To reset next inspection mileage, press EXIT for no change.
(This step is same as Channel number (52) Serv. int. - fixed mileage.)
10.Input new value 00000 to reset next inspection time.
(This step is same as Channel number (55) time from inspection.)
11.To reset next inspection time, press EXIT for no change.
(This step is same as Channel number (54) Fixed time interval.)
15
Distance from inspection -
17
old value::::0015200 km new value::::………… ………… ………… ………… km
ENTER: confirm input
16
Distance from inspection -
17
old value::::0015200 km new value::::0000000 km
ENTER: confirm input
17
Serv. int. - fixed mileage–17
old value::::0030000 km new value::::………… km
18
Serv. int. - fixed mileage–17
old value::::0030000 km
new value::::0030000 km
ENTER: confirm input
19
Time from inspection– 17
old value::::00378 new value::::……………………
Increments: 1 = 1 day(s)
20
Time from inspection– 17
old value::::00378 new value::::00000
Increments: 1 = 1 day(s)
ENTER: confirm input
● To change some setting or check service mileage or time from the CAR buttom
of audio operation panel.
21
Fixed time interval– 17
old value::::00730 new value::::……
Increments: 1 = 1 day(s)
22
Fixed time interval– 17
old value::::00730
new value::::00730
Increments: 1 = 1 day(s)
ENTER: confirm input
23
Service reset entry - 17
DONE
● There is a hole of Oil Level Gauge that only stopper on it without gauge in the
engine room.
Please check oil level from vehicle information of audio operation panel
after replace oil.
4. VASS/AUDI new model service reset (UDS Service reset) There are two modes for modify service intervals: ESI and SID
(1) ESI Mode : there are two ways for service reset.
1. Select WIV: Resetting ESI
2. Select 17 SIE: distance driven from inspection and
18 SIE: time from inspection to reset distance and time.
(2) SID Mode: there is only one way for service reset.
1. Select 17 SIE: distance driven from inspection and
18 SIE: time from inspection to reset distance and time.
Remark: please do input date when adapting service interval.
Do not need to input second time if only the scanner not shut down.
Example 1: Year 2011 VOLKSWAGEN GOLF 6 GENERATION
Procedure of Adapting Service Interval on iSCAN-IIwt:
1.Select Vehicle Diagnostic -> EUROPEAN
2.Select VW AUDI SEAT SKODA
1
Main Menu ����
2 Component Test System (External Modules) 3 IMS2 (Interface Module Simulation System) 80 OBD- II Standard Compliant Diagnostics 82 DOL Mode (Diagnostic On-Line)
1 Vehicle Diagnostic
2
Vehicle Diagnostic
1 AMERICAN
3 ASIAN
2 EUROPEAN
3
EUROPEAN �
1 MERCEDES-BENZ 2 FIAT LANCIA ALDA 3 OPEL VAUXHALL
WIV: Coding of Service Interval Extension (SIE) -> Selection of ESI or SID
Current Extended Service Intervals (ESI)
1 Service interval display (SID) 2 Extended Service Intervals (ESI)
13
Adaptation - 17
1 Production mode
2 Service-key settings
3 Acoustics for timeout signaling
4 Display depiction
5 Service Key All Conuters
6 Twindrive
7 Distance
8 WIV: Coding of Service Interval
Extension (SIE)
10 Language version
11 Display correction of
consumptions and operating
range
12 Seat belt warning
9 WIV: Resetting ESI
14
Adaptation - 17
15
Adaptation - 17
9.Current setting: Reset -> Service reset completed.
10. ESI mode 2
Service reset on 17 SIE: distance driven from inspection and 18 SIE: time from
inspection
SID mode as above
Select 17 SIE: distance driven from inspection -> input date
ESI::::Resetting ESI
Current Warning active Select new setting
2 Warning active
1 Reset
Please wait …
Enter current date::::………………………………
16
Adaptation - 17
Please wait…
Enter current date::::2011.08.30
ENTER: Confirm input
17
Adaptation - 17
Old setting Warning active Set value Reset Current setting Reset
Adaptation Succeeded
EXIT: Confirm input
18 19
11.Select 18 SIE: time from inspection -> input date
Adaptation - 17
13 Hour 14 Minute 15 Display correction of fuel gauge 16 Speed threshold of dynamic oil pressure warning
18 SIE: time from inspection 19 SIE: minimum value km-driving distance/inspection 20 SIE: maximum value km-driving distance/inspection 21 SIE: maximum value of time between inspections 22 SIE: oil quality量量量量
17 SIE: distance driven from
inspection
Adaptation - 17
SIE: distance driven from
inspection
Current 15500 km
Enter new setting:……
20
Adaptation - 17
SIE: distance driven from inspection Current 15500 km
Enter current dat::::2012.02.21
ENTER: Confirm input
21
Adaptation - 17
13 Hour 14 Minute 15 Display correction of fuel gauge 16 Speed threshold of dynamic oil pressure warning 17 SIE: distance driven from inspection
19 SIE: minimum value km-driving distance/inspection 20 SIE: maximum value km-driving distance/inspection 21 SIE: maximum value of time between inspections 22 SIE: oil quality
18 SIE: time from inspection
22
Adaptation - 17
SIE: time from inspection Current 342 days
Enter new setting::::……
23
Adaptation - 17
SIE: time from inspection
Current 342 days
Enter current date::::2011.08.30
12.Select SIA: maximum value of distance to service to change service
distance interval
13.Select SIA: maximum value of time to service to change service time interval
24
Adaptation - 17
23 SIE: soot entry 24 SIE: thermal load 25 Trip recorder 26 Additional coding 27 Cruise control display 28 Volume to be replenished 29 WIV: minimum value of time between inspections
31 SIA: maximum value of time to service 32 Staging 33 Indicator light for start-stop operation 34 Instantaneous Consumption Display
30 SIA: maximum value of
distance to service
25
Adaptation - 17
SIA: maximum value of time to
service
Current 15000 km
Enter new setting::::……
26
Adaptation - 17
SIA: maximum value of time to service Current 15000 km
Enter new setting::::10000
27
Adaptation - 17
Old setting 15000 km
Set value 10000 km
Current setting 10000 km
Adaptation Succeeded
EXIT: Confirm input
28
Adaptation - 17
23 SIE: soot entry 24 SIE: thermal load 25 Trip recorder 26 Additional coding 27 Cruise control display 28 Volume to be replenished 29 WIV: minimum value of time
29
Adaptation - 17
SIA: maximum value of time
to service
Current 372 d
14.Select 10 Language version to change language on instrument panel
15.Select 13 Hour to change time on instrument panel
between inspections 30 SIA: maximum value of distance to service
SIA: maximum value of time to service Current 372 d
Enter new setting::::365
31
Adaptation - 17
Old setting 372 d
Set value 365 d
Current setting 365 d
Adaptation Succeeded
EXIT: Confirm input
32
Adaptation - 17
1 Production mode 2 Service-key settings 3 Acoustics for timeout signaling 4 Display depiction 5 Service Key All Conuters 6 Twindrive 7 Distance 8 WIV: Coding of Service Interval Extension (SIE) 9 WIV: Resetting ESI
11 Display correction of consumptions and operating range 12 Seat belt warning
10 Language version
33
Adaptation - 17
Language version
Current US English
Select new setting
1 Chinese
2 German
3 English
4 French
5 Italian
6 no language
7 without text
8 Portuguese
9 Russian
10 Spanish
11 Czech
12 US English
34
Adaptation - 17
14 Minute 15 Display correction of fuel gauge 16 Speed threshold of dynamic oil pressure warning 17 SIE: distance driven from inspection 18 SIE: time from inspection 19 SIE: minimum value km-driving distance/inspection 20 SIE: maximum value km-driving distance/inspection 21 SIE: maximum value of time between inspections 22 SIE: oil quality