This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Max Stockpile Capacity – 135⁰ Kidney Bean: 10040m3
Capacity: up to 600TPH Based on 100mm Lump size at 18⁰ working angle. Max belt speed.Hydraulic feed in height adjustmentHydraulic fold over for transportSpring mounted poly blade head drum scraper
UNDERCARRIAGE Crawler tracks with pendant control system (NOT radio controlled)Speed: single speed tracking,Single radial wheel driveTracks 1800mm centers, 400mm shoe.
ELECTRICALHand held track control set with connection leadEmergency stops x 2Engine prestart delay & sirenRadio remote control system for crawler tracks
SPECIFICATION
Feedboot Extensions
Hydraulic Feed Adjust
Under Conveyor Guards
Twin Conveyor Motors
TR-75GENERALDischarge head drum bearing automatic greasing cartridge
Low level greasing
Orange-RAL2002. Special paint colour (if different from above). RAL must be specified on order
PACKAGINGRoll on Roll off transport (RoRo)Containerisation, packed into 1 x 40ft high cube container
OPTIONSCanvas dust covers on discharge conveyor
Canvas dust covers complete with dust hood on discharge conveyor
Twin drive discharge conveyor Full length side skirting along discharge conveyorHigh spec discharge conveyor head drum scraperAnti-roll back flaps Discharge belt upgraded to 3ply heavy duty beltDischarge conveyor underguard option length of mid sectionDust suppression at discharge conveyor head drumBelt weigher optionRadio remote, raise / lower discharge conveyor Pull Cord E-stop running length of discharge Conveyor Radio remote to Track machineTelemetryFeedboot lined 6mm wearplateExtended feet boot lined 6mm wearplateHopper flares lined 6mm wearplateTwin radial wheel drive
TRANSPORT DIMENSIONS
WORKING DIMENSIONS
15.6m (51’ 3”) 2.25m (7’ 5”)
3.m
(10’
)
5.29m (17’ 4”)22.7m (73’)
11.6
5m (3
8’ 3
”)
Effective June 2018. Product specifications and prices are subject to change without notice or obligation. The photographs and/or drawings in this document are for illustrative purposes only. Refer to the appropriate Operator’s Manual for instructions on the proper use of this equipment. Failure to follow the appropriate Operator’s Manual when using our equipment or to otherwise act irresponsibly may result in serious injury or death. The only warranty applicable to our equipment is the standard written warranty applicable to the particular product and sale and Terex USA LTD. makes no other warranty, express or implied. Products and services listed may be trademarks, service marks or trade-names of Terex Corporation and/or its subsidiaries in the USA and other countries. All rights are reserved. Terex® is a registered trademark of Terex Corporation in the USA and many other countries. Copyright 2010 Terex USA Ltd.
Follow Us:
TM
R
www.terexfinlay.com
FEED BOOTu Capacity: 0.6m3 u Feed height: 2750mmu Feed in width: 1850mm
DISCHARGE CONVEYOR:u Conveyor length: 22.9mu Belt width: 1050mmu Optimum working angle: 18⁰u Optimum discharge height: 9mu Stockpile capacity at optimum working angle based on 37⁰ angle of repose: Conical: 1344m3
u Max. working angle: 23⁰u Max. discharge height: 10.9mu Max. stockpile capacity based on 37⁰ angle of repose: Conical: 2388m3
u Capacity: up to 500tph. Based on 100mm Lump size at 18⁰ work angle. Max belt speed.
UNDERCARRIAGE:u Crawler tracks with pendant control systemu Speed: single speed trackingu Single radial wheel driveu Tracks 1800mm centers, 400mm shoe