Cover
Telenor Vega Project
TECHNICAL SITE SURVEY REPORT(V2.2)
Site ID:QABW01Site Name:QABW01Site
TypeGFCity/town:Goth-Abdul-Wahid-SurkiDistrict:Goth-Abdul-Wahid-SurkiSite
Address:Tappoo Garhi Hassan Sarki, Deh. Hanbhi,Taluka Thul District
Jaccobabad.
Surveyor:Irfan AliTel:0344-4447691Survey Date: 07-Mar-13
ZTE SubmitterTelenor ReceiverTelenor Approver
Name:Name:Name:Date:Date:Date:
Existing InfoTechnical Site Survey Report Telenor Vega
ProjectQtySurvey ItemExisting InformationTipsSite Basic
Information1Site ID:QABW012Site Name:QABW013RF Configuration for
900Mhz-ExistingS3/2/2/Automatically generated 4RF Configuration for
1800Mhz-ExistingS2/2//Automatically generated
5City/town:Goth-Abdul-Wahid-Surki6District:Goth-Abdul-Wahid-Surki7Survey
Date: 7/Mar/138Longitude(E):68.73699Latitude(N):28.326410Site
LocationCity11Elevation (m):6512Site Type:GFGreenfield Site or
Rooftop Site13Hub/Normal/BSC/CoreNormal14Site type (equipment
location):Outdoor Pad15Building Height(m):16Site
Category:MacroMacro, Micro or TXN Repeater17Tower propertyTP
BulidTP Build, TP Guest or Authority18Host OperatorTP19Number of
sharing parties020Tower Type:3-legs Tower21Tower/Pole MaterialTube
Tower22Tower Height(m):4523Tower PaintNO24Tower grounding
providedYES25Fall Arrest System (Cage / Anti Glide lock
System)YES26Air Craft Warning Light installedYES27Fire Panel
InstallationYES28Boundary/Wall Fence TypeBoundary29Site
SecuritySecurity Guard/Remotely Monitored30Site Address:Tappoo
Garhi Hassan Sarki, Deh. Hanbhi,Taluka Thul District
Jaccobabad.Site Access Information1Site Access24hrs2Night access
possibleYes3Land Owner IssueNo4Land Owner Name5Contact Number for
Site Access6Special Access PermissionsNo7Society issueNo8Special
Key needed?No9Crane needed10Width of stairsonly for rooftop
sites11RemarkExisting AC Informaiton1Independent
TransformerNO2Sanctioned Load (KW)Allowed maximum power could be
used for site3Existing IPS TypeN/AIf no IPS, please choose
N/A4Existing ATS TypeN/AIf no ATS, please choose N/A5Existing ACDB
TypeN/AIf no ACDB, please choose N/A6AC PowerThree phase7Surge
Arrestor Installed YES8Surge Arrestor Rating(kA)409Main Breaker
Capacity63A10Total service breakers111Rating of
transformer(KVA)12AC cable size 16mmFrom MCB to ACDB/IPS/ATS13AC
cable Length(m)1314Spare socket Qty.015Spare service
breakers016Current Load(A)4.2A17Current Load(B)6.1A18Current
Load(C)5.4A19Rating of ATS/IPS KVA20RemarkExisting Grounding
Information1Numbers of earthing Pit2Grounding Resistance Pit1
(ohm)3.93Grounding Resistance Pit2 (ohm)If there are more separated
Pit. 4RemarkAnything else to recordExisting Genset
Information1Existing GensetAvailableonly for TP Genset2Genset
ModelSiemensonly for TP Genset3Genset Qty1only for TP Genset4Genset
Capacity(KVA)11only for TP fuel tank5Existing fuel
tankAvailableonly for TP fuel tank6Fuel tank Capacity(L)600only for
TP fuel tankExiting Rec.Rec. Type 11DC System ManufacturerELTEK
Rectifier installed(OD)2Rec. Model.Eltek FP2 2000[New
Rectifier]3Service Rectifier Module44Spare Module Slots45Each
Module Capacity2000W6Total DC Breakers147Spare DC Breakers38Output
Voltage51V9DC Total Capacity8000W10Spare socket Qty.211Current
Loadind26.3A12Spare Space Inside of Rec.(U)2URec. Type 21DC System
Manufacturer2Rec. Model.3Service Rectifier Module4Spare Module
Slots5Each Module Capacity6Total DC Breakers7Spare DC
Breakers8Output Voltage9DC Total Capacity10Spare socket
Qty.11Current Loadind12Spare Space Inside of
Rec.(U)13RemarkExisting Battery Information Battery Type 11Battery
ModelZTE BatteryIf the Cabinet not open, no need fill in this
information2Battery Group Quantity(0,1,2,3)1If the Cabinet not
open, no need fill in this information3Battery Type(2v,12v)2vIf the
Cabinet not open, no need fill in this information4Battery Capacity
of Each GroupIf the Cabinet not open, no need fill in this
information5Battery InstallationOutdoor Battery CabinetBattery Type
21Battery ModelIf the Cabinet not open, no need fill in this
information2Battery Group Quantity(0,1,2,3)If the Cabinet not open,
no need fill in this information3Battery Type(2v,12v)If the Cabinet
not open, no need fill in this information4Battery Capacity of Each
GroupIf the Cabinet not open, no need fill in this
information5Battery InstallationExisting Equipments Information1Qty
of Existing BTS Cabinet1Only for TP Equipments2Type of Existing BTS
CabinetSiemensOnly for TP Equipments3Dimensions of Existing BTS
Cabinet770x770x2100Only for TP Equipments4Qty of Existing Rec.
Cabinet1Only for TP Equipments5Dimensions of Existing Rec.
Cabinet800x830x2100Only for TP Equipments6Qty of Existing Outdoor
Battery Cabinet1Only for TP Equipments7Dimensions of Existing
Outdoor Battery Cabinet700x700Only for TP EquipmentsExisting
Pad/Shelter Information1Number of shelters/rooms2Dimension of
shelter/room13Dimension of shelter/room24Dimension of
shelter/room35Dimension of shelter/room4 6Number of
air-conditioners7Capacity of Air Conditioner [Tones]No need to fill
if there is no label on the air conditioner8Dimension of existing
Pad 4500x15009SunshadeAvailableIf not available, please propose new
sunshade10Qty of Existing Cabinet on the Existing BTS Pad3choose 0
for indoor site, only for TP BTS pad11Spare Space on the Existing
Pad for New Rec or SDR1 CabinetOnly for TP pad12Existing Base Frame
TypeNo existing base frame,Short channel (need to be removed),Width
less than 660mm,Width more than 660mm.13RemarkAnything else to
recordBTS External Alarms1Alarm typeELTEK Rectifier
installed(OD)2Existing total alarm points qty 93High Voltage Alarm
Status4Door Open Alarm StatusAvailable5AC Main Fail Alarm
Status6Low Voltage Alarm Status7Distribution Fuse Alarm
Status8Temperature Alarm Status9Generator Running Alarm Status10OB
Light Alarm Status11Low Fuel Alarm Status12GEM Active Alarm
Status13Spare alarm points(NIL) qty14Rectifier Fail Alarm
Status15HEX/LOAD Alarm Status16Spare alarm points(NIL) Status17Hi
Temp Alarm Status18Air Conditioner Alarm Status19Smoke Detector
Alarm Status20AVR Alarm Status21High Load Alarm Status22GEM Fail
Alarm StatusExisting 2G-900Mhz Antenna System
InformationItemSector-1Sector-2Sector-3Sector-41Band of
AntennaG900G900G9002Antenna
TypeKathrein739686Kathrein739686Kathrein7396863BandSingleSingleSingle4Qty
of Ports2225Qty of Antennas1116TMA Type Used7Qty of TRX3228Height
(AGL) 4343439Azimuth34015027010Mechanical00011Electrical
Tilt53312Pole Length3m3m3m13Ant Jumper TypeLCF D-D 1/2"LCF D-D
1/2"LCF D-D 1/2"14Main Feeder TypeLCF 7/8"LCF 7/8"LCF 7/8"15Main
Feeder Qty22216Main Feeder Length50505017Combiner Model
Used18Combiner Type Used19BTS Jumper TypeSCF D-D 1/2"SCF D-D
1/2"SCF D-D 1/2"Existing 2G-1800Mhz Antenna System
InformationItemSector-1Sector-2Sector-3Sector-41Band of
Antenna1800A1800A2Antenna
TypeKathrein742215Kathrein7422153BandSingleSingle4Qty of
Ports225Qty of Antennas116Qty of TRX227TMA Type Used8Height (AGL)
43439Azimuth34015010Mechanical0011Electrical Tilt1112Pole
Length3m3m13Ant Jumper TypeLCF D-D 1/2"LCF D-D 1/2"14Main Feeder
TypeLCF 7/8"LCF 7/8"15Main Feeder Qty2216Main Feeder
Length505017Combiner Model Used18Combiner Type Used19BTS Jumper
TypeSCF D-D 1/2"SCF D-D 1/2"SCF D-D 1/2"
&FPage &P
Tower loadingExisting RF Antenna Information(including other
operator's ANT)Site ID:QABW01No.Tower Leg No.Antenna
Height(m)Antenna AzmuthAntenna Length(mm)Antenna Width(mm)Antenna
Thickness(mm)BandVendorAntenna
OwnerRemarkLoading(m2)1L1433402580262116G900KathreinTP0.682L1433401314155701800AKathreinTP0.203L2431502580262116G900KathreinTP0.684L2431501314155701800AKathreinTP0.205L3432702580262116G900KathreinTP0.68678910111213141516171819202122232425Current
RF Antennas Loading 2.44
Existing MW equipment Information(including other operator's
ANT)No.Tower Leg No.Antenna Height(m)Remote SiteAntenna
SizeEquipment Type(IDU)Antenna OwnerAntenna
AzmuthLoading(m2)1L1311.2TP6012L1221.8TP1033L2331.2TP1551456789101112131415161718Current
MW Dishes Loading 4.80
Proposed LoadingNo.ItemsQuantityLoading(m2)12G RRU23G RRU3G
RRU30.3m MW dish40.6m MW dish50.9m MW dish61.2m MW dish71.8m MW
dish82.0m MW dishTotal Loading 7.2493G AntennaTower Design
LoadingProposed Loading 0.00Tower strengthen requiredYES
&FPage &P
Proposed InfoTechnical Site Survey Report Telenor Vega
ProjectSite ID: QABW01QtyProposed ItemProposed
InformationTipsProposed SWAP Information1RF Configuration for
900MhzS3/2/2/Automatically generated 2RF Configuration for
1800MhzS2/1//Automatically generated 3Swap ModelOD to OD With New
PadBS8700W301BS8700BS8800BS8900BS89084SDR TypeBS8700BS8700BS8700 is
distributed and RRU installed on the tower/pole, BS8900 is ourdoor
macro, BS8800 is indoor marco, BS8908 is metroBS8800Wall
Mounted5BBU Installation TypeBS8900BC8910only for distributed, if
BBU installed inside of SDR cabinet, no need fill in this
informationBS890019''TXN Rack6Qty. of Proposed Macro SDR Cabinet
1BS8908Existing Rec.7Qty. of BS8908BC89108Proposed SDR Cabinet
Installed on theIndoorNew PadIf no new SDR cabinet, no need fill in
information9Base Frame for New SDR Cabinet (BS8900ABC8910)base
frame for existing steel beam(950mm length)For TP Outdoor Site10BBU
DC Cable Length(m)2m BBU DC power cableonly for distributed,if BBU
installed inside of BS8800,BS8900,BS8908,BC8910 cabinet, please
choose N/AN/A11Power Cable length for SDR Cabinet7if BBU installed
inside of BS8800, BS8900, BS8908 and BC8910Short ChannelLong
Channelbase frame for exisitng channel site(700mm
length)12Grounding Cable for BBU Installed Inside of W301(m)if BBU
installed in the W301,existing Rec., TRX rack, wall
mountedOthersSteel Beam with short channelbase frame for existing
steel beam(950mm length)13Grounding Cable for SDR Cabinet(m)5if BBU
installed inside of BS8800, BS8900, BS8908 and BC891014Tower
Strengthing for 3G Single Band Antenna, RRUs and New MW dishYESOD
to ODRRU on the towerBS8700W30115RemarkID to
ODMacroBS8800T601Proposed AC Power informationID to
IDBS89001Proposed ACDBBS89082Proposed IPS3Required 10 Amp Circuit
Breaker 1 Phase AC breakersif no need new breaker, no need fill in
this information4Required 16 Amp Circuit Breaker 1 Phase AC
breakersif no need new breaker, no need fill in this
information5Required 20 Amp Circuit Breaker 1 Phase AC breakersif
no need new breaker, no need fill in this information6Required 16
Amp Circuit Breaker 3 Phase AC breakersif no need new breaker, no
need fill in this information7Required 32 Amp Circuit Breaker 3
Phase AC breakersif no need new breaker, no need fill in this
information8Required 63 Amp Circuit Breaker 3 Phase AC breakersif
no need new breaker, no need fill in this information92 Core
(16mm2) AC power cable (Between ACDB/IPS/ATS and MCB)if no need new
breaker, no need fill in this information104 Core (16mm2) AC power
cable (Between ACDB/IPS/ATS and MCB)if no need new breaker, no need
fill in this information112 Core (25mm2) AC power cable (Between
ACDB/IPS/ATS and MCB)if no need new breaker, no need fill in this
information124 Core (25mm2) AC power cable (Between ACDB/IPS/ATS
and MCB)if no need new breaker, no need fill in this
information13Grounding cable for new pad grounding barUnit:Meter;
from new pad grounding bar to existing grounding system.14Grounding
cable 16mm2Unit:MeterProposed Rec. Information1Proposed
RectifierReuseW301 is outdoor Rec, T601 is indoor Rec, If no need
Rec., choose N/A2Proposed New Rec. installed on theif existing Rec.
reused, choose N/A3Base Frame for New Rec.only for TP outdoor
site42 Core (16mm2) AC power cable (Between ACDB/IPS/ATS and
Rec.)Unit:Meter54 Core (16mm2) AC power cable(Between ACDB/IPS/ATS
and Rec.)Unit:Meter62 Core (25mm2) AC power cable(Between
ACDB/IPS/ATS and Rec.)Unit:Meter74 Core (25mm2) AC power
cable(Between ACDB/IPS/ATS and Rec.)Unit:Meter8New DC Power Cable
Length(between Rec. and Battery)Unit:Meter9Grounding Cable Length
Unit:MeterProposed Battery Information1Proposed New Battery Cabinet
TypeN/Aif battery installed outdoor battery cabinet, please choic
N/A2Battery Cabinet Installed on theIf no need new battery, no need
fill in information3Base Frame for New Battery Cabinetonly for
battery cabinet installed on the existing padProposed Outdoor Pad
and Sunshade1Swap ModelOD to OD With New Pad2Outdoor Pad for 1
Cabinet With SunshadeRefer to Generic Design3Outdoor Pad for 2
Cabinets With SunshadeRefer to Generic Design4Outdoor Pad for 3
Cabinets With SunshadeRefer to Generic DesignOutdoor
fiber(2m)5Outdoor Pad for 4 Cabinets With SunshadeRefer to Generic
DesignOutdoor fiber(3m)6Frame and sunshade for additonal BTS or
Rectifier (partial; either for BTS or rectifier)Unit:EachOutdoor
fiber(5m)7Frame and sunshade for additonal BTS or Rectifier
(complete; for one BTS and one rectifier)Unit:EachOutdoor
fiber(10m)8BTS and Power cabinets mounting frame with
sunshadeUnit:EachOutdoor fiber(20m)9Existing Shelter
ModificationUnit:EachOutdoor fiber(25m)10Special Outdoor
Pad1Unit:EachOutdoor fiber(30m)11Sunshade Typespecial ODU
sunshadeUnit:EachOutdoor fiber(35m)Proposed Cable TrayOutdoor
fiber(40m)1300mm Width Horizontal Cable
Tray(Indoor)Unit:MeterOutdoor fiber(45m)2300mm Width Vertical Cable
Tray(Indoor)Unit:MeterOutdoor fiber(50m)3300mm Width Horizontal
Cable Tray(outdoor)3Unit:MeterOutdoor fiber(60m)4300mm Width
Vertical Cable Tray(outdoor)Unit:MeterOutdoor fiber(70m)5400mm
Width Horizontal Cable Tray(outdoor)Unit:MeterOutdoor
fiber(80m)6400mm Width Vertical Cable
Tray(outdoor)3Unit:MeterOutdoor fiber(90m)Proposed PipeOutdoor
fiber(100m)1Soft PipeFor indoor fiber protection. Unit:MeterOutdoor
fiber(115m)2PVC Pipe (Diameter-25mm)For outdoor underground cabling
protection. Unit:MeterOutdoor fiber(145m)3PVC DuckFor indoor
cabling protection(out of cable bridge part). Unit:MeterOutdoor
fiber(160m)4Steel Pipe (Diameter-25mm )For special situation
requirments. Unit:MeterOutdoor fiber(175m)5Metal flexible
piple10For outdoor on ground cabiling protection. Unit:MeterOutdoor
fiber(190m)Proposed 900Mhz Antenna System and RRUs
InformationOutdoor
fiber(205m)ItemSector-1Sector-2Sector-3Sector-4Outdoor
fiber(220m)1Existing Antenna Reused/New
AntennaReusedReusedReusedOutdoor fiber(235m)2Antenna
BandG900G900G900Outdoor fiber(250m)3Antenna
TypeKathrein739686Kathrein739686Kathrein739686Outdoor
fiber(280m)4Qty of Antennas111Outdoor fiber(310m)5Port of
Antenna222Outdoor fiber(350m)6Height (AGL)
4343437Azimuth3401502708Machanical Tilt0009Electrical Tilt53310Ant.
Jumper TypeSCF D-D 1/2"SCF D-D 1/2"SCF D-D 1/2"11Antenna Jumper
Length(m)55312BTS Jumper Type13BTS Jumper Length(m)14Qty of TRX
(Very Important)32215RRU TypeR8882(MBR)R8882(MBR)R8882(MBR)16Qty.
of RRU Type11117RRU Mounting SolutionRRU Mount for Tube Tower for 3
RRUsRRU Mount for Tube Tower for 3 RRUsRRU Mount for Tube Tower for
3 RRUsN/A18Fibre LengthOutdoor fiber(60m)Outdoor fiber(60m)Outdoor
fiber(60m)19DC Power Cable Lenth555555Angle TowerRRU Mount for
Angle Tower for 3 RRUsProposed 1800Mhz Antenna System and RRUs
InsormationMonopoleRRU Mount for Monopole Tower for 3
RRUsItemSector-1Sector-2Sector-3Sector-4Guy MastRRU Mount for Guy
Mast Tower for 3 RRUs1Existing Antenna Reused/New
AntennaReusedReusedTube TowerRRU Mount for Tube Tower for 3
RRUs2Antenna Band1800A1800ACudee TowerRRU Mount for Cudee Tower for
3 RRUs3Antenna TypeKathrein742215Kathrein742215Rooftop PoleRRU
Mount on the Roof Top for 3 RRUs4Qty of
Antennas11=IF(C110>0,IF(($D$7"BS8700"),1,IF((C111&C115="R8860E-1800MhzR8860E-1800Mhz")+(C111="R8882(MBR_SHARE
WITH 900M)"),1,C112+C116)),0)RRU Mount for Angle Tower for single
RRU5Remove Qty of Existing AntennasRRU Mount for Monopole Tower for
single RRU6Port of Antenna22RRU Mount for Guy Mast Tower for single
RRU7Height (AGL) 4343RRU Mount for Tube Tower for single
RRU8Azimuth340150RRU Mount for Cudee Tower for single
RRU9Machanical Tilt00Shared With 900Mhz RRU Mount10Electrical
Tilt11Wall Mount PoleWall Mount11Ant. Jumper TypeSCF D-D 1/2"SCF
D-D 1/2"12Antenna Jumper Length(m)5513BTS Jumper Type14BTS Jumper
Length(m)15Qty of TRX (Very Important)21Jumper Temp16RRU Type
1R8882(MBR_SHARE WITH 900M)R8882(MBR_SHARE WITH
900M)DualDualSingleSingle17Qty. of RRU Type 1MBRMBRNN18Fibre Length
for Type1111019DC Power Cable Lenth for Type1442020RRU Type 2SCF
D-D 1/2"5SCF D-D 1/2"5SCF D-D 1/2"390021Qty. of RRU Type 2SCF D-D
1/2"5SCF D-D 1/2"5180022Fibre Length for Type2442090023DC Power
Cable Lenth for Type20000180024RRU Mounting
SolutionN/AN/AN/AN/AProposed 3G Antenna System and RRUs
InformationItemSector-1Sector-2Sector-3Sector-41Existing Antenna
Reused/New AntennaAnt Mount for Angle Tower with 2m Pole 23G
BandAnt Mount for Angle Tower with 3m Pole 3Antenna TypeAnt Mount
for Monopole with 2m Pole 4Qty of AntennasAnt Mount for Monopole
with 3m Pole 5Port of AntennaAnt Mount for GuyMast with 2m Pole
6Ant Mount TypeAnt Mount for GuyMast with 3m Pole 7Height (AGL) Ant
Mount for Tube Tower with 2m Pole 8AzimuthAnt Mount for Tube Tower
with 3m Pole 9Machanical TiltAnt Mount for Cudee Tower with 2m Pole
10Electrical TiltAnt Mount for Cudee Tower with 2m Pole 11Ant.
Jumper TypeDiversity Frame 2.5m Galvanised Iron (GI)12Antenna
Jumper Length(m)Diversity Frame 4m Galvanised Iron (GI)13Feeder
Type3m rooftop pole14Feeder Length6m rooftop pole15BTS Jumper
Type16BTS Jumper Length(m)17RRU Type18Qty. of RRU TypeRRU Mount for
Angle Tower for 3 RRUs19RRU Mounting SolutionRRU Mount for Monopole
Tower for 3 RRUs20Fibre LengthRRU Mount for Guy Mast Tower for 3
RRUs21DC Power Cable LenthRRU Mount for Tube Tower for 3 RRUsRRU
Mount for Cudee Tower for 3 RRUsRRU Mount on the Roof Top for 3
RRUsRRU Mount for Angle Tower for single RRURRU Mount for Monopole
Tower for single RRURRU Mount for Guy Mast Tower for single RRURRU
Mount for Tube Tower for single RRURRU Mount for Cudee Tower for
single RRUWall Mount
&FPage &P
Photos3. Site PhotosSite ID:QABW013.1 Site Basic PhotosPlease
refer to Site photo folder
Access RoadSite Overview
Transformer(If have) SharedExisting Battery
Existing ACDB 01(door closed) Existing ACDB 02(door open)
Antenna nameplateGPS record 1
GPS record 2GPS record 3
MCCB Rating Existing MCDB 03(zoom door open)
Existing Rectifier(door closed)Existing Rectifier(door open)
Existing Rectifer Brand& Module TypeExisting Rectifer(zoom
door open)
Existing Transmission Rack Exisiting Generator
Existing Transmission Rack(Zoom)Genset Rating
Physical Condition ATS(door closed)ATS(door open)
Existing Vertical Cable LadderExisting Horizontal Cable
Ladder
Alarm moduleExisiting Antenna (RF&MW) position on
Tower/Pole
Existing BTS RackExisting BTS Rack(door open)
3.2 Site Details View Photo
Tower/Pole StructureExisting Shelter/Room/Outdoor Pad
Existing Sunshade (Outdoor)Existing equipment base frame
Route of Cable LadderExisting Feeder Portholes
Existing Grounding Bar on Tower/poleExisting Outdoor/Indoor
Grounding Bar
Lightening ArrestorEarth Pit
Earth Resistance Value (AC)Earth Resistance Value (DC)
Earth Resistance Value (Tower)Existing Sector-1
Existing Sector-2Existing Sector-3
Existing Sector-4Existing Pole 01
Existing Pole 02Existing Pole 03
Existing Pole 04Existing Separate Battery Cabinet
3.3 Proposed New Equipment & Antenna
Proposed New SDR LocationReused Existing DDF
Proposed New Rec. LocationProposed RRU Location-1
Proposed RRU Location-2Proposed RRU Location-3N/A
Proposed RRU Location-4Proposed New Pad Location
New Antenna01 on Tower/pole( Section1)New Antenna02 on
Tower/pole( Section2)
New Antenna03 on Tower/pole( Section3)New Antenna 04 on
Tower/pole( Section4)
&FPage &P
MaterialItemType of MaterialMaterial
CodeUnitLength(m)QtyMaterial DetailAC PowerSite ID:QABW01New
outdoor ACDBPowerset01IPSPowerset012 Core (16mm2) AC power cable
(Between ACDB/IPS/ATS and MCB)Powerm012 core AC Cable4 Core (16mm2)
AC power cable (Between ACDB/IPS/ATS and MCB)Powerm014 core 16mm2
AC Cable2 Core (25mm2) AC power cable (Between ACDB/IPS/ATS and
MCB)Powerm012 core AC Cable4 Core (25mm2) AC power cable (Between
ACDB/IPS/ATS and MCB)Powerm014 core 25mm2 AC CableRequired 10 Amp
Circuit Breaker 1Phase AC breakerspcs01Required 16 Amp Circuit
Breaker 1Phase AC breakerspcs01Required 20 Amp Circuit Breaker
1Phase AC breakerspcs01Required 16 Amp Circuit Breaker 3 Phase AC
breakerspcs01Required 32 Amp Circuit Breaker 3 Phase AC
breakerspcs01Required 63 Amp Circuit Breaker 3 Phase AC
breakersPowerpcs01Grounding cable for new pad grounding
barPowerm01Copper Thumber Powerpcs10grounding cable
16mm2Powerm01Copper Thumber 0-16 mm2Powerpcs10W301
Installation800mm Base FrameCWset10base frame950mm Base
FrameCWset10base frame2 Core (16mm2) AC power cable (Between
ACDB/IPS/ATS and Rec.)Powerm012 core AC Cable4 Core (16mm2) AC
power cable(Between ACDB/IPS/ATS and Rec.)Powerm014 core 16mm2 AC
Cable2 Core (25mm2) AC power cable(Between ACDB/IPS/ATS and
Rec.)Powerm012 core AC Cable4 Core (25mm2) AC power cable(Between
ACDB/IPS/ATS and Rec.)Powerm014 core 25mm2 AC CableDC (25mm2) power
cable (Between Rec. and Battery)Powerm01Battery CableGrounging
cable for W301(16mm2)Powerm01Copper Thumber 0-16 mm2Powerpcs10T601
installation2 Core (16mm2) AC power cable (Between ACDB/IPS/ATS and
Rec.)Powerm012 core AC Cable4 Core (16mm2) AC power cable(Between
ACDB/IPS/ATS and Rec.)Powerm014 core 16mm2 AC Cable2 Core (25mm2)
AC power cable(Between ACDB/IPS/ATS and Rec.)Powerm012 core AC
Cable4 Core (25mm2) AC power cable(Between ACDB/IPS/ATS and
Rec.)Powerm014 core 25mm2 AC CableDC (25mm2) power cable (Between
Rec. and Battery)Powerm01Battery CableGrounging cable for new
Rec.(16mm2)Powerm01Copper Thumber 0-16 mm2Powerpcs10Battery 12V
Battery cabinetPowercabinet10DC (2 core 1.5mm2) power cable
(Between Rec. and Battery for battery cabinet AC)Powerm01DC
cable800mm Base FrameCWset10base frame950mm Base FrameCW10base
frameGrounding cable for new battery cabinet(16mm2)Powerm50Copper
Thumber o-16Powerpcs10BS8800 InstallationDC Blue Power Cable(from
rec.25mm2)Powerm01DC cableDC Black GND Cable(from
rec.25mm2)Powerm01DC cableGrounding cable(16mm2)Earthingm01Copper
Thumber 0-16 mm2Earthingpcs10BS8900 Installation800mm Base
FrameCWset10base frame950mm Base FrameCWset10base frameDC Blue
Power Cable(from Rec.25mm2)Powerm01DC cableDC Black GND Cable(from
Rec.25mm2)Powerm01DC cableGrounding cable(16mm2)Earthingm01Copper
Thumber 0-16 mm2Earthingpcs10BS8908 InstallationBS8908
CabinetSDRcabinet10BS8908 Base Frame (Installed on the
floor)CWset10BS8908 Wall-mount (Installed to wall)CWset101-TO-1
BS8908 Bracket (A BS8908 installed to pole) SDRset101-TO-2 BS8908
Bracket (Back-to-back installation for 2 BS8908 )SDRset101-TO-3
BS8908 bracket (Combined installation of 3 BS8908)SDRset102 core
shielded DC power cable(4mm2, length