GRUNDFOS DATA BOOKLET TP 100-60/4-A-F-A-BUBE 400Y 50HZ Grundfos Pump 96402628 Thank you for your interest in our products Please contact us for more information, or visit our website https://www.lenntech.com/grundfos/TP000/96402628/TP-100-60-4-A-F-A-BUBE.html [email protected]tel. +31-15-261.09.00 fax. +31-15-261.62.89 BE > THINK > INNOVATE
11
Embed
TP 100-60/4-A-F-A-BUBE 400Y 50HZ · Printed from Grundfos Product Centre [2018.02.043] Position Qty. Description 1 TP 100-60/4 A-F-A-BUBE Product No.: 96402628 Single-stage, close-coupled,
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Thank you for your interest in our productsPlease contact us for more information, or visit our websitehttps://www.lenntech.com/grundfos/TP000/96402628/TP-100-60-4-A-F-A-BUBE.html
Printed from Grundfos Product Centre [2018.02.043]
Position Qty. Description1 TP 100-60/4 A-F-A-BUBE
Product No.: 96402628
Single-stage, close-coupled, volute pump with in-line suction and discharge ports of identical diameter.The pump is of the top-pull-out design, i.e. the power head (motor, pump head and impeller) can beremoved for maintenance or service while the pump housing remains in the pipework.The pump is fitted with an unbalanced rubber bellows seal. The shaft seal is according to EN 12756.Pipework connection is via PN 10 DIN flanges (EN 1092-2 and ISO 7005-2).The pump is fitted with a fan-cooled asynchronous motor.
Further product detailsThe product's minimum efficiency index (MEI) is greater or equal to 0.70. This is by the CommissionRegulation (EU) considered as an indicative benchmark for best-performing water pump available onthe market as from 1 January 2013.
PumpPump housing and pump head are electrocoated to improve the corrosion resistance.Electrocoating includes:1) Alkaline-based cleaning.2) Pretreatment with zinc phosphate coating.3) Cathodic electrocoating (epoxy).4) Curing of paint film at 200-250 °C.
1: Pump housing2: Impeller3: Shaft4: Coupling5: Pump head
The pump housing is provided with a replaceable stainles steel/PTFE neck ring to reduce the amount ofliquid running from the discharge side of the impeller to the suction side. The impeller is secured with asplit cone with nut.
The pump is fitted with an unbalanced rubber bellows seal with torque transmission across the springand around the bellows. Due to the bellows, the seal does not wear the shaft, and the axial movementis not prevented by deposits on the shaft.Primary seal:
- Rotating seal ring material: Tungsten carbide (WC)- Stationary seat material: Carbon graphite, resin-impregnated
This is a widely used material pairing. If the pumped liquid contains particles, wear on the seal facesmust be expected. Due to the favourable lubricating properties of carbon graphite, the seal is suitablefor use even under poor lubricating conditions, such as hot water. However, under such conditions,wear on the carbon graphite face reduces seal life.Secondary seal material: EPDM (ethylene-propylene rubber)EPDM has excellent resistance to hot water. EPDM is not suitable for mineral oils.
Printed from Grundfos Product Centre [2018.02.043]
Position Qty. DescriptionA circulation of liquid through the duct of the air vent screw ensures lubrication and cooling of the shaftseal.The flanges have tappings for mounting of pressure gauges.
The motor stool forms connection between the pump housing and the motor, and is equipped with amanual air vent screw for venting of the pump housing and the shaft seal chamber. The sealingbetween motor stool and pump housing is an O-ring.The central part of the motor stool is provided with guards for protection against the shaft and coupling.Motor and pump shaft are connected via a rigid two-part coupling.
MotorThe motor is a totally enclosed, fan-cooled motor with principal dimensions to IEC and DIN standards.Electrical tolerances comply with IEC 60034.
The motor is flange-mounted with tapped-hole flange (FT).Motor mounting designation in accordance with IEC 60034-7: IM B 14, IM V 18 (Code I) / IM 3601, IM3611 (Code II).
The motor efficiency is classified as IE3 in accordance with IEC 60034-30.The motor can be connected to a variable speed drive for adjustment of pump performance to any dutypoint. Grundfos CUE offers a range of variable speed drives. Please find more information in GrundfosProduct Center.
Technical data
Liquid:Pumped liquid: WaterLiquid temperature range: 0 .. 140 °CLiquid temperature during operation: 20 °CDensity: 998.2 kg/m³
Electrical data:Motor type: 90SBIE Efficiency class: IE3Rated power - P2: 1.1 kWPower (P2) required by pump: 1.1 kWMains frequency: 50 HzRated voltage: 3 x 220-240D/380-415Y V
Printed from Grundfos Product Centre [2018.02.043]
Position Qty. DescriptionRated current: 4,85/2,80 AStarting current: 820-900 %Cos phi - power factor: 0,71-0,64Rated speed: 1450-1460 rpmEfficiency: IE3 84,1%Motor efficiency at full load: 84.1 %Motor efficiency at 3/4 load: 84.6 %Motor efficiency at 1/2 load: 82.9 %Number of poles: 4Enclosure class (IEC 34-5): 55 Dust/JettingInsulation class (IEC 85): F
Printed from Grundfos Product Centre [2018.02.043]
96402628 TP 100-60/4 50 Hz
Note! All units are in [mm] unless others are stated.Disclaimer: This simplified dimensional drawing does not show all details.
122
182
625
450
200
225
100
173 121
110 178173173
M16
RP 1/4
Printed from Grundfos Product Centre [2018.02.043]
96402628 TP 100-60/4 50 Hz
Note! All units are in [mm] unless others are stated.
L1 L2 L3
L3L2L1
LOW VOLTAGEDIRECTION OF ROTATION
HIGH VOLTAGEDIRECTION OF ROTATION
Disclaimer: The information about the Grundfos pump in this document may be outdated.Data may be subject to alterations without further notice.Please contact us to verify the data above is still accurate/up-to-date.