www.arkitech.com.tr Total Solution for Light Steel Framing Industry • Framers • Design Software • Engineering Analysis Software • Manufacturing Software • Comprehensive Materials
www.arkitech.com.tr
Total Solution for Light Steel Framing Industry• Framers• Design Software• Engineering Analysis Software• Manufacturing Software• Comprehensive Materials
About usArkitech Advanced Construction Technologies is the technology leading Light Gauge Steel (LGS) technology provider for construction
and manufacturer companies intending to construct and manufacture with LGS structure. Arkitech Technology Package includes framers,
design software, manufacturing software, commissioning, and training on-site and engineering solutions.
Arkitech focuses particularly on result-oriented professional innovative solutions paying most attention on high quality, low costs, and
minimum time expenditure for the benefits of the user of this technology. To achieve these objectives, since establishment in the year
2012 in Ankara, Arkitech with their experienced and highly qualified in-house engineers has always been developing own products
responding the demanding requirements of LGS market for high quality and for high performance level.
Based on the over 15 years of experience of Arkitech employees in LGS Technology we have developed a very sophisticated solution
to ensure fully accurate and reliable manufacturing processes. The Arkitech LGS System guarantees cost benefits over conventional
construction methods due to high design capability, comprehensive reporting for material assessment and minimal material wastage
during production. The quick high-volume manufacturing of LGS frames accelerates the building construction timescale resulting in
greater profitability. Arkitech’s technology is used worldwide for manufacturing a wide range of applications for residential, commercial,
modular and multi-story buildings, as well as for bathroom pods, site offices, worker accommodation units, prefabricated modules,
temporary units, warehouses, etc.
We have invested significant capital in high industrial grade CNC machines to ensure we have a total quality management of all our
critical components. We develop, design, engineer and manufacture our entire roll forming assemblies and components in our factory.
Arkitech install in all their Framers a Motion Controller, Servo Drive and a Servo Motor supplied by SEW Eurodrive & Hydraulics Pump
supplied by Bucher, the leading German Manufacturers, ensuring precision control & high accuracy.
Our Graduate Structural Engineers provide training and consulting services for our 3D Design and Frame Engineering Analysis
Software.
Training Subjects
• Light Steel Building Technology
• Arkitech Design and Detailing Software
• Arkitech Framer Software
• Machine Control and Frame Manufacturing
• Mechanical Maintenance
Our Quality Management Factory and Design methods are
audited by International Certification Authorities, therefore
our processes, products and manufacturing meet very high
International Standards.
Arkitech Light Steel Framing Machines manufacture a high
quality precisely well-formed profile with well-documented
steel properties performance tables for optimum structural
load applications, both for external and internal wall frames. In-addition Arkitech Framers are all fitted with a special 45deg
end chamfer station to produce a web member that is always correctly connected for all acute angles encountered with roof
trusses, beams, and K Brace applications.
Arkitech Light Steel Framing System
Applications of Arkitech Light Gauge Steel Construction System
Residential Low-rise
Mid-rise
Social Housing
Mass Housing
Modular Housing
CommercialCompany Headquarters
Site Offices
Worker Accommodation
Retail Outlets
ATM Centers
Kiosks
Warehouses
Hotel-Resort-Bungalow
Institutional UsageSchools,
Health Centers,
Army Barracks & Utility Areas
Customized ProjectsIntegrated Buildings
which are designed based
upon specific customer
requirements
Arkitech Design Software is a powerful, flexible and user friendly
tool specially made for light steel framing. All design work can be
done in Arkitech Design, from low level villas to multi-level or split
level complex structures.
Arkitech Design Software Properties
• User friendly 3D visual interface
• Helpful geometric tools
• Viewing production processes, sheeting and perspective of 3D structure
• Importing DXF formatted files
• Automatically creating all structural members with “Auto Create” function
• Easily creating the 3D structure from 2D architectural drawings or axle lines
• Automatic clash check between profiles or between frames, frame geometry and minimum length check functions
• Bill of material reports for steel, rivet/screw usage, cladding areas etc.
• DXF Exports for 3D and plan view, and assembly drawings
• Defining the material properties, point loads, distributed loads and load combinations within software and preparing
the SAP2000 export file.
• Calculates support reactions, deflections profile capacities and force diagrams for structural analysis
• Exports manufacturing file
• Exports Arkitech Mobile Viewer file
Arkitech Structure Engineering Analysis Software
Fully AISI and Eurocode Compliant Frame Engineering Analysis Software Module available.
Arkitech 3D Design Software
After the design of structure in Arkitech Design Software, a manufacturing file is exported. The production file is loaded via a USB
drive to the Framer on board PC providing all the information for the machine operator to control production.
Arkitech Framer Manufacturing software is Windows based and user friendly. Real time graphics show; parts manufactured (blue), part
under manufacture (red) and parts to be manufactured (grey) with intelligent color coding.
Also, the production speed can be adjusted on the Arkitech Framer Software. With this feature, operator can speed up or slow down
the machine according to speed of the combining process.
Arkitech Framer Manufacturing Software Properties
• Hydraulic station operation times, license and language settings can be changed in the user settings.
• New stations can be added and there are digital gauges for oil pressure and oil temperature.
• From the Real Time Manufacturing section; user can adjust the production speed, and start, stop and pause the manufacturing
process. The amount of steel usage, number of rivets / screws, production time, remaining time, and real time hydraulic heat –
pressure values can be seen in this section.
• The machine operator can very easily calibrate all of the Framer operations including length check in a matter of minutes.
• Production reports, error reports and material usage reports can be taken from the reporting section.
• In simulation mode, all processes made on the profile and the results of them can be seen without actual manufacturing.
Arkitech Framer Manufacturing Software
Arkitech - AF1200P FRAMER
Arkitech - DC2500 DE-COILERThe AF1200P Technology Package includes the DC2500
Automatic Feed 2.5 TON (5500lb) De-Coiler controlled by a
Laser Sensor. The De-Coiler with Electronic Variable Speed
Soft / Stop Operation in both directions and a Hand held
Remote Control at the AF1200P Framer.
AF1200P FRAMER“The LGS Industry’s most cost effective solution for Single Profile Manufacturing”
EXPANDABLE FEATURE – Optional Tool OperationsThe AF1200P Framer is fitted as Standard with an additional Spare (2) Hydraulic Tool Station Bay.
Our AF1200P Framer is a fully featured cost effective machine with all the tool stations you need to make this a very
versatile manufacturing system.
The AF1200P is a heavy duty framing machine of robust construction, proven reliability, efficiency & performance.
VARIABLE FLANGE HEIGHT
The AF1200P FRAMER Profile Flange heights are variable from 41 mm (1⅝”) to 50 mm (2”) with a simple adjustment.
Your Technology Package is Inclusive of:Arkitech Design and Detailing Software License
Arkitech Manufacturing Software – Installed into the On-board PC/Monitor
Spare Parts Kits (1) Pack Consumables Parts and (1) Pack Adjustment Tools
Commissioning and Training for the AF1200P Framer
Training Session at your Premises/Factory for our Arkitech Design and Detailing Software
Software and Framer Technical Support
PROFILE OPTIONS AVALIABLE63mm (2½”) | 75mm (3”) | 90mm (3½”) | 100mm (4”) | 140mm (5½”) | 150mm (6”)
“We can manufacture to a Custom Width”
PROFILE GAUGE RANGEThe AF1200P Framer will manufacture the profile in a thickness from 0.55mm to (25ga) to 1.2mm (18ga)
Arkitech have a wide range of Optional Profile Operations
TOOL STATION OPERATION EXAMPLES
Lip Flatten | Elliptical Hole | 50mm Service Hole | Flange Multi Connection“Or Request a Custom Tool Station Operation”
Manufacturing Solution up to 1.2mm (18ga) Gauge
Suitable for a Factory based Operation or On-Site Mobile Facility for precision
fast reliable Cold Rolled Steel manufacturing
A wide range of LGS Construction Solutions
Wall Frames | Joists | Trusses | Roof | Ceiling | Header
Typical ApplicationsThe AF1200P Framer is suitable for LGS Residential Structures ranging from Single to 3 levels
to prefabricated buildings such as Office / Accommodation and Bathroom Pod Modules.
• Residential & Affordable Housing Projects• Prefabricated Offices• Bathroom Pod Modular Constructions• Roof Trusses • Floor Joists and Beams• Medium Roof/Truss Span Storage Units
Arkitech Precision Design & LGS Construction Technology
Cut Notch Dimpled Screw/Rivet Chamfer Service Hole Web Bolt + Index Holes (2) Lip Cut Swage
AF1600P FRAMER“The LGS Industry’s most cost effective solution for Single Profile Manufacturing”
Arkitech - AF1600P FRAMER
Arkitech - DC2500 DE-COILERThe AF1600P Technology Package includes the DC2500
Automatic Feed 2.5 TON (5500lbDe-Coiler controlled by a
Laser Sensor. The De-Coiler with Electronic Variable Speed
Soft / Stop Operation in both directions and a Hand held
Remote Control at the AF1600P Framer.
EXPANDABLE FEATURE – Optional Tool OperationsThe AF1600P Framer is fitted as Standard with an additional Spare (2) Hydraulic Tool Station Bays.
Our AF1600P Framer is a fully featured cost effective machine with all the tool stations you need to make this a very
versatile manufacturing system.
The AF1600P is a heavy duty framing machine of robust construction, proven reliability, efficiency & performance.
VARIABLE FLANGE HEIGHT
The AF1600P FRAMER Profile Flange heights are variable from 41 mm (1⅝”) to 50 mm (2”) with a simple adjustment.
Your Technology Package is Inclusive of:Arkitech Design and Detailing Software License
Arkitech Manufacturing Software – Installed into the On-board PC/Monitor
Spare Parts Kits (1) Pack Consumables Parts and (1) Pack Adjustment Tools
Commissioning and Training for the AF1600P Framer
Training Session at your Premises/Factory for our Arkitech Design and Detailing Software
Software and Framer Technical Support
Manufacturing Solution up to 1.6mm (16ga) Gauge
PROFILE OPTIONS AVALIABLE63mm (2½”) | 75mm (3”) | 90mm (3½”) | 100mm (4”) | 140mm (5½”) | 150mm (6”)
“We can manufacture to a Custom Width”
PROFILE GAUGE RANGEThe AF1600P Framer will manufacture the profile in a thickness from 0.75mm (22ga) to 1.6mm (16ga)
Arkitech have a wide range of Optional Profile Operations
TOOL STATION OPERATION EXAMPLES
Lip Flatten | Elliptical Hole | 50mm Service Hole | Flange Multi Connection“Request a Custom Tool Station Operation”
Suitable for a Factory based Operation or On-Site Mobile Facility for precision
fast reliable Cold Rolled Steel manufacturing
A wide range of LGS Construction Solutions
Wall Frames | Joists | Trusses | Roof | Ceiling | Header
Typical ApplicationsThe AF1600P Framer will manufacture LGS Frame Profiles up to 1.6mm (16ga) Gauge for construction projects ranging from Single
Level Residential Housing up to 5 level Multi-Storey Apartment Structures.
• Residential & Affordable Housing Projects
• Multi-Storey Apartment Buildings
• Prefabricated Offices
• Bathroom Pod Modular Constructions
• Industrial Storage Units
Arkitech Precision Design & LGS Construction Technology
Cut Notch Dimpled Screw/Rivet Chamfer Service Hole Web Bolt + Index Holes (2) Lip Cut Swage
AF2000P FRAMER“The LGS Industry’s most cost-effective solution for Single Profile Manufacturing for Higher Thicknesses”
Arkitech - AF2000P FRAMER
Arkitech - DC2500 DE-COILERThe AF2500P Technology Package includes the DC2500
Automatic Feed 2.5 TON De-Coiler controlled by a Laser
Sensor. The De-Coiler with Electronic Variable Speed Soft /
Stop Operation in both directions and a Hand-held Remote
Control at the AF2000P Framer.
EXPANDABLE FEATURE – Optional Tool OperationsThe AF2000P Framer is fitted as Standard with an additional Spare (2) Hydraulic Tool Station Bays.
Our AF2000P Framer is a fully featured cost-effective machine with all the tool stations you need to make this a very versatile manufacturing system.
The AF2000P is a heavy-duty framing machine of robust construction, proven reliability, efficiency & performance.
VARIABLE FLANGE HEIGHT
The AF2000P FRAMER Profile Flange heights are variable from 45 (1¾”) mm to 55 mm (2⅛”) with a simple adjustment.
Your Technology Package is Inclusive of:Arkitech Design and Detailing Software License
Arkitech Manufacturing Software – Installed into the On-board PC/Monitor
Spare Parts Kits (1) Pack Consumables Parts and (1) Pack Adjustment Tools
Commissioning and Training for the AF2000P Framer
Training Session at your Premises/Factory for our Arkitech Design and Detailing Software
Software and Framer Technical Support
Manufacturing Solution up to 2.0mm (14ga) Gauge
PROFILE OPTIONS AVALIABLE63mm (2½”) | 75mm (3”) | 90mm (3½”) | 100mm (4”) | 140mm (5½”) | 150mm (6”)
“We can manufacture to a Custom Width”
PROFILE GAUGE RANGEThe AF2000P Framer will manufacture the profile in a thickness from 0.75mm (22ga) to 2.0mm (14ga)
Arkitech have a wide range of Optional Profile Operations
TOOL STATION OPERATION EXAMPLES
Lip Flatten | Elliptical Hole | 50mm Service Hole | Flange Multi Connection“Request a Custom Tool Station Operation”
Suitable for a Factory based Operation or On-Site Mobile Facility for precision
fast reliable Cold Rolled Steel manufacturing
A wide range of LGS Construction Solutions
Wall Frames | Joists | Trusses | Roof | Ceiling | Header
Typical ApplicationsThe AF2000P Framer will manufacture LGS Frame Profiles up to 2.0mm (14ga) Gauge for construction projects ranging from Single
Level Residential Housing up to 5 level Multi-Storey Apartment Structures.
• Residential & Affordable Housing Projects
• Multi-Storey Apartment Buildings Prefabricated Offices
• Bathroom Pod Modular Constructions
• Industrial Storage Units
• Solar Panel Profiles
Arkitech Precision Design & LGS Construction Technology
Cut Notch Dimpled Screw/Rivet Chamfer Service Hole Web Bolt + Index Holes (2) Lip Cut Swage
AF2500P FRAMER‘’The LGS’s Industry’s most cost-effective solution for Single Profile Manufacturing Floor Joist/Portal Frame/Modular Construction”
Arkitech - AF2500P FRAMER
Arkitech - DC4000 DE-COILERThe AF2500P Technology Package includes the DC4000
Automatic Feed 4 TON (8800lb) De-Coiler controlled by a
Laser Sensor. The De-Coiler with Electronic Variable Speed
Soft / Stop Operation in both directions and a Hand held
Remote Control at the AF2500P Framer.
EXPANDABLE FEATURE – Optional Tool OperationsThe AF2500P Framer is fitted as Standard with an additional Spare (1) Hydraulic Tool Station Bay.
Our AF2500P Framer is a fully featured cost effective machine with all the tool stations you need to make this a very
versatile manufacturing system.
AF2500P has all necessary connection tools for manufacturing Floor Joists, Portal Frames and Modular Constructions.
VARIABLE FLANGE HEIGHT
The AF2500P FRAMER Profile Flange heights are variable from 55 mm (2⅛”) to 70 mm (2¾”) with a simple adjustment.
Your Technology Package is Inclusive of:Arkitech Design and Detailing Software License
Arkitech Manufacturing Software – Installed into the On-board PC/Monitor
Spare Parts Kits (1) Pack Consumables Parts and (1) Pack Adjustment Tools
Commissioning and Training for the AF2500P Framer
Training Session at your Premises/Factory for our Arkitech Design and Detailing Software
Software and Framer Technical Support
Manufacturing Solution up to 2.5mm (12ga) Gauge
PROFILE OPTIONS AVALIABLE200mm (8”) | 225mm (9”) | 250mm (10”) | 275mm (11”) | 300mm
(12”)“We can manufacture to a Custom Width”
PROFILE GAUGE RANGEThe AF2500P Framer will manufacture the profile in a thickness from 1.0mm (20ga) to 2.5mm (12ga)
Arkitech has Optional Profile Operation
TOOL STATION OPERATION
34mm Service Hole | Web Ø34mm+2x1 Ø13mm Hole“Request a Custom Tool Station Operation”
Suitable for a Factory based Operation or On-Site Mobile Facility for precision
fast reliable Cold Rolled Steel manufacturing
A wide range of LGS Construction Solutions
Floor Joists | Portal Frames | Modular Constructions
Typical Applications
The AF2500P Framer will manufacture LGS Frame Profiles up to 2.5mm (12ga) Gauge for various construction projects.
• Floor Joists of Buildings
• Portal Frames for Warehouse and Factory Projects
• Modular Constructions
Arkitech Precision Design & LGS Construction Technology
Cut Double Tab Swage Dimpled Flange Bolt Lip Cut Swaged Service Hole Web Multi Bolt Hole Pre Cut
Arkitech - DC2500 DE-COILERThe RS1200P Technology Package includes the DC2500
Automatic Feed 2.5 TON (5500lb) De-Coiler controlled by
a Laser Sensor. The De-Coiler with Electronic Variable Speed
Soft / Stop Operation in both directions and a Hand held
Remote Control at the RS1200P Framer.
RS1200P FRAMER“The LGS Industry’s most cost effective Multi-Profile Machine for a Total Roofing Solution”
Your Technology Package is Inclusive of:Arkitech Design and Detailing Software License
Arkitech Manufacturing Software – Installed into the On-board PC/Monitor
Spare Parts Kits (1) Pack Consumables Parts and (1) Pack Adjustment Tools
Commissioning and Training for the RS1200P Framer
Training Session at your Premises/Factory for our Arkitech Design and Detailing Software
Software and Framer Technical Support
Arkitech - RS1200P FRAMER
RS1200P FRAMER
The RS1200P Framer is a fully featured cost effective machine with all the tool stations you need to make this a very
versatile manufacturing system. The RS1200P is a heavy duty truss & beam framing machine of robust construction,
proven reliability, efficiency & performance.
Roof Truss Manufacturing Solution
Factory based Operation for precision fast Cold Rolled Steel Roof Trusses Roof Purlins & Ceiling Batten manufacturing
Complete LGS Roofing System Solutions
Roof Trusses | Roof Purlins | Ceiling Battens
CEILING BATTEN PROFILEDimensions
5/8” LIP | 1⅝” WEB | 7/8” FLANGE
PROFILE GAUGE
Profile Material 0.55mm
(25ga) to 1.0mm (20ga)
ROOF PURLIN PROFILEDimensions
5/8” LIP | 1⅝” WEB | 1⅝” FLANGE
PROFILE GAUGE
Profile Material 0.75mm (22ga) to
1.2mm (18ga)
ROOF TRUSS PROFILEDimensions
5/8” LIP | 1⅝” WEB | 2⅛” FLANGE
PROFILE GAUGE
Profile Material 0.75mm (22ga) to
1.2mm (18ga)
Arkitech ROOF TRUSS | PURLINS | BATTENS
Cut Flange Connection 1 Flange Connection 2 Web Bolt Hole Lip Cut Swage Notch
MF 2000P FRAMER“The LGS Industry’s most cost-effective solution for Multi Profile Manufacturing”
Arkitech - MF 2000P FRAMER
Arkitech - DC4000 DE-COILERThe MF2000P Technology Package includes the DC4000
Automatic Feed 4 TON (8800lb) De-Coiler controlled by a
Laser Sensor. The De-Coiler with Electronic Variable Speed
Soft / Stop Operation in both directions and a Hand held
Remote Control at the MF2000P Framer.
EXPANDABLE FEATURE – Optional Tool OperationsThe MF2000P Framer is fitted as Standard with (16) Hydraulic Tool Station Bays(16) Hydraulic Tool Station installed on the Framer and there are (2) Additional Hydraulic Tool Station Bays which are pre-configured for additional Hydraulic Tool Station Installation.Our MF2000P Framer is a fully featured cost-effective machine with all the tool stations you need to make this a very versatile manufacturing system. The MF2000P is a heavy-duty framing machine of robust construction, proven reliability, efficiency & performance.
AUTO ADJUST WEB
The MF2000P FRAMER Profile Web sizes are automatically adjusted by Servo Motor.
VARIABLE FLANGE HEIGHTThe MF2000P FRAMER Profile Flange heights are variable from 41 mm to 70 mm with a simple adjustment.
Your Technology Package is Inclusive of:Arkitech Design and Detailing Software License
Arkitech Manufacturing Software – Installed into the On-board PC/Monitor
Spare Parts Kits (1) Pack Consumables Parts and (1)
Pack Adjustment Tools Commissioning and Training for the MF2000P Framer
Training Session at your Premises/Factory for our Arkitech Design and Detailing Software
Software and Framer Technical Support.
Manufacturing Solution up to 2.0mm (14ga) Gauge
PROFILE WEB RANGESelection of Eight (8) Profile Webs between 63mm (2½”) to 250mm (10”)
“We can add more profile web sizes upon customer’s request”
Arkitech have a wide range of Optional Profile Operations
We can manufacture a Custom Tool Station Operation
Suitable for a Factory based Operation for precisionfast reliable Cold Rolled Steel manufacturing
A wide range of LGS Construction Solutions
Wall Frames | Joists | Trusses | Roof | Ceiling | Header
Typical Applications
The MF2000P Framer will manufacture LGS Frame Profiles up to 2.0mm (14ga) Gauge for construction projects ranging from
Single Level Residential Housing up to 5 level Multi-Storey Apartment Structures.
• Residential & Affordable Housing Projects• Multi-Storey Apartment Buildings Prefabricated Offices• Bathroom Pod • Modular Constructions• Industrial Storage Units• Solar Panel Profiles
Arkitech Precision CADesign & LGS Construction Technology
PROFILE GAUGE RANGEThe MF2000P Framer will manufacture the profile in a thickness from 0.75mm (22ga) to 2.0mm (14ga)
Cut
Pre Cut
Notch
Dimpled Flange Bolt Flange Bolt Flange Multi Con.
Dimpled Screw / Rivet Chamfer Service Hole
Slot Hole
Web Bolt + Index Hole (2)
Double Tab
Lip Cut
Web Multi Bolt Hole
Swage
Swage Service Hole
ARKITECH FRAMER RANGEFramer AF1200P AF1600P AF2000P AF2500P RS1200P RS1600P MF1200P MF1600P MF2000P MF2500P MF3000P MF4000P
Profile Single Profile Single Profile Single Profile Single Profile Multi Profile Multi Profile Multi Profile Multi Profile Multi Profile Multi Profile Multi Profile Multi Profile
Profile Shapes C & U C & U C & U C & U Truss l Ceiling l Roof Truss l Ceiling l Roof C & U C & U C & U C & U C & U, Sigma C & U, Sigma, Z
Hydraulic Stations 8 8 8 8 7 7 9 9 16 18 18 18
Punching Tools 9 Standard 9 Standard 9 Standard 8 Standard 7 Standard 7 Standard 10 Standard 10 Standard 17 Standard 19 Standard 19 Standard 19 Standard
1 Cut Cut Cut Cut Cut Cut Cut Cut Cut Cut Cut Cut
2 Notch Notch Notch Double Tab Flange Connection 1 Flange Connection 1 Notch Notch Notch Notch Notch Notch
3 Swage Swage Swage Swage Flange Connection 2 Flange Connection 2 Swage Swage Swage Swage Swage Swage
4 Lip Cut Lip Cut Lip Cut Lip Cut Web Bolt Hole Web Bolt Hole Lip Cut Lip Cut Lip Cut Lip Cut Lip Cut Lip Cut
5 Service Hole Service Hole Service Hole Dimpled Flange Bolt Lip Cut Lip Cut Service Hole Service Hole Service Hole Service Hole Service Hole Service Hole
6 Web Bolt + Index Holes (2) Web Bolt + Index Holes (2) Web Bolt + Index Holes (2) Swaged Service Hole Swage Swage Web Bolt + Index Holes (2) Web Bolt + Index Holes (2) Web Bolt + Index Holes (2) Web Bolt + Index Holes (2) Web Bolt + Index Holes (2) Web Bolt + Index Holes (2)
7 Dimpled Screw/Rivet Dimpled Screw/Rivet Dimpled Screw/Rivet Web Multi Bolt Hole (x5) Notch Notch Pre Cut Pre Cut Pre Cut Pre Cut Pre Cut Pre Cut
8 Chamfer Chamfer Chamfer Pre Cut - - Dimpled Screw/Rivet Dimpled Screw/Rivet Dimpled Screw/Rivet Dimpled Screw/Rivet Dimpled Screw/Rivet Dimpled Screw/Rivet
9 - - - - - - Chamfer Chamfer Chamfer Chamfer Chamfer Chamfer
10 - - - - - - - - Double Tab Double Tab Double Tab Double Tab
11 - - - - - - - - Flange Bolt Flange Bolt Flange Bolt Flange Bolt
12 - - - - - - - - Swaged Service Hole Swaged Service Hole Swaged Service Hole Swaged Service Hole
13 - - - - - - - - Web Multi Bolt Hole (x5) Web Multi Bolt Hole (x5) Web Multi Bolt Hole (x5) Web Multi Bolt Hole (x5)
14 - - - - - - - - Dimpled Flange Bolt Dimpled Flange Bolt Dimpled Flange Bolt Dimpled Flange Bolt
15 - - - - - - - - Slot Hole Slot Hole Slot Hole Slot Hole
16 - - - - - - - Flange Multi Connection Flange Multi Connection Flange Multi Connection Flange Multi Connection
Optional Punching Tools 2 2 2 1 1 1 2 2 2 2 2 2
Steel Thickness0.55mm to 1.2mm 0.75mm to 1.6mm 0.75mm to 2.0mm 1.0mm to 2.5mm 0.55mm to 1.2mm 0.75mm to 1.6mm 0.55mm to 1.2mm 0.75mm to 1.6mm 0.75mm to 2.0mm 0.75mm to 2.5mm 1.0mm to 3.0mm 1.0mm to 4.0mm
25ga to 18ga 22ga to 16ga 22ga to 14ga 20ga to 12ga 25ga to 18ga 22ga to 16ga 25ga to 18ga 22ga to 16ga 22ga to 14ga 22ga to 12ga 20ga to 11ga 20ga to 9ga
Steel Grade S270 to S550 S270 to S550 S270 to S550 S270 to S550 S270 to S550 S270 to S550 S270 to S550 S270 to S550 S270 to S550 S270 to S550 S270 to S550 S270 to S550
Profile Width
63mm l 75mm l 90mm 63mm l 75mm l 90mm 63mm l 75mm l 90mm 200mm l 225mm l 250mm 15mm l 42mm l 55mm 15mm l 42mm l 55mm63mm to 150mm 63mm to 200mm 63mm to 250mm 75mm to 300mm 75mm to 350mm 75mm to 400mm
100mm l 140mm l 150mm 100mm l 140mm l 150mm 100mm l 140mm l 150mm 275mm l 300mm 15mm l 42mm l 40mm 15mm l 42mm l 40mm
2½” | 3” | 3½” 2½” | 3” | 3½” 2½” | 3” | 3½” 8” | 9” | 10” 15mm l 42mm l 22mm 15mm l 42mm l 22mm2½” to 6” 2½” to 8” 2½” to 10” 3” to 12” 3” to 14” 3” to 16”
4” | 5½” | 6” 4” | 5½” | 6” 4” | 5½” | 6” 11” | 12” 5/8” l 1” l 2” & 1” & 7/8” 5/8” l 1” l 2” & 1” & 7/8”
Profile Flange41mm to 51mm 41mm to 51mm 45mm to 55mm 55mm to 70mm 22mm to 55mm 22mm to 55mm 41mm to 51mm 41mm to 55mm 41mm to 70mm 41mm to 75mm 45mm to 75mm 45mm to 75mm
1” to 2” 1” to 2” 1¾” to 2⅛ 2” to 2¾” 7/8” to 2” 7/8” to 2” 1” to 2” 1” to 2” 1⅛” to 2¾” 1⅛” to 3” 1¾” to 3” 1¾” to 3”
Boxable Section Optional Optional Optional Optional No No Yes Yes Yes Yes Yes Yes
Decoiler2500 Kg 2500 Kg 2500 Kg 4000 Kg 2500 Kg 2500 Kg 2500 Kg 2500 Kg 4000 Kg 4000 Kg 8000 Kg 8000 Kg
5500 lb 5500 lb 5500 lb 8800 lb 5500 lb 5500 lb 5500 lb 5500 lb 8800 lb 8800 lb 17600 lb 17600 lb
Printer Dual Head Dual Head Dual Head Dual Head Single Head Single Head Dual Head Dual Head Dual Head Dual Head Dual Head Dual Head
Design Software
Arkitech Designer Arkitech Designer Arkitech Designer Arkitech Designer Arkitech Designer Arkitech Designer Arkitech Designer Arkitech Designer Arkitech Designer Arkitech Designer Arkitech Designer Arkitech Designer
Strucsoft MWF Strucsoft MWF Strucsoft MWF Strucsoft MWF Strucsoft MWF Strucsoft MWF Strucsoft MWF Strucsoft MWF Strucsoft MWF Strucsoft MWF Strucsoft MWF Strucsoft MWF
Vertex BD Vertex BD Vertex BD Vertex BD Vertex BD Vertex BD Vertex BD Vertex BD Vertex BD Vertex BD Vertex BD Vertex BD
Tekla Structures Tekla Structures Tekla Structures Tekla Structures Tekla Structures Tekla Structures Tekla Structures Tekla Structures Tekla Structures Tekla Structures Tekla Structures Tekla Structures
Onboard Monitor 19” Touch Screen 19” Touch Screen 19” Touch Screen 19” Touch Screen 19” Touch Screen 19” Touch Screen 19” Touch Screen 19” Touch Screen 19” Touch Screen 19” Touch Screen 19” Touch Screen 19” Touch Screen
Framer AF1200P AF1600P AF2000P AF2500P RS1200P RS1600P MF1200P MF1600P MF2000P MF2500P MF3000P MF4000P
Profile Single Profile Single Profile Single Profile Single Profile Multi Profile Multi Profile Multi Profile Multi Profile Multi Profile Multi Profile Multi Profile Multi Profile
Profile Shapes C & U C & U C & U C & U Truss l Ceiling l Roof Truss l Ceiling l Roof C & U C & U C & U C & U C & U, Sigma C & U, Sigma, Z
Hydraulic Stations 8 8 8 8 7 7 9 9 16 18 18 18
Punching Tools 9 Standard 9 Standard 9 Standard 8 Standard 7 Standard 7 Standard 10 Standard 10 Standard 17 Standard 19 Standard 19 Standard 19 Standard
1 Cut Cut Cut Cut Cut Cut Cut Cut Cut Cut Cut Cut
2 Notch Notch Notch Double Tab Flange Connection 1 Flange Connection 1 Notch Notch Notch Notch Notch Notch
3 Swage Swage Swage Swage Flange Connection 2 Flange Connection 2 Swage Swage Swage Swage Swage Swage
4 Lip Cut Lip Cut Lip Cut Lip Cut Web Bolt Hole Web Bolt Hole Lip Cut Lip Cut Lip Cut Lip Cut Lip Cut Lip Cut
5 Service Hole Service Hole Service Hole Dimpled Flange Bolt Lip Cut Lip Cut Service Hole Service Hole Service Hole Service Hole Service Hole Service Hole
6 Web Bolt + Index Holes (2) Web Bolt + Index Holes (2) Web Bolt + Index Holes (2) Swaged Service Hole Swage Swage Web Bolt + Index Holes (2) Web Bolt + Index Holes (2) Web Bolt + Index Holes (2) Web Bolt + Index Holes (2) Web Bolt + Index Holes (2) Web Bolt + Index Holes (2)
7 Dimpled Screw/Rivet Dimpled Screw/Rivet Dimpled Screw/Rivet Web Multi Bolt Hole (x5) Notch Notch Pre Cut Pre Cut Pre Cut Pre Cut Pre Cut Pre Cut
8 Chamfer Chamfer Chamfer Pre Cut - - Dimpled Screw/Rivet Dimpled Screw/Rivet Dimpled Screw/Rivet Dimpled Screw/Rivet Dimpled Screw/Rivet Dimpled Screw/Rivet
9 - - - - - - Chamfer Chamfer Chamfer Chamfer Chamfer Chamfer
10 - - - - - - - - Double Tab Double Tab Double Tab Double Tab
11 - - - - - - - - Flange Bolt Flange Bolt Flange Bolt Flange Bolt
12 - - - - - - - - Swaged Service Hole Swaged Service Hole Swaged Service Hole Swaged Service Hole
13 - - - - - - - - Web Multi Bolt Hole (x5) Web Multi Bolt Hole (x5) Web Multi Bolt Hole (x5) Web Multi Bolt Hole (x5)
14 - - - - - - - - Dimpled Flange Bolt Dimpled Flange Bolt Dimpled Flange Bolt Dimpled Flange Bolt
15 - - - - - - - - Slot Hole Slot Hole Slot Hole Slot Hole
16 - - - - - - - Flange Multi Connection Flange Multi Connection Flange Multi Connection Flange Multi Connection
Optional Punching Tools 2 2 2 1 1 1 2 2 2 2 2 2
Steel Thickness0.55mm to 1.2mm 0.75mm to 1.6mm 0.75mm to 2.0mm 1.0mm to 2.5mm 0.55mm to 1.2mm 0.75mm to 1.6mm 0.55mm to 1.2mm 0.75mm to 1.6mm 0.75mm to 2.0mm 0.75mm to 2.5mm 1.0mm to 3.0mm 1.0mm to 4.0mm
25ga to 18ga 22ga to 16ga 22ga to 14ga 20ga to 12ga 25ga to 18ga 22ga to 16ga 25ga to 18ga 22ga to 16ga 22ga to 14ga 22ga to 12ga 20ga to 11ga 20ga to 9ga
Steel Grade S270 to S550 S270 to S550 S270 to S550 S270 to S550 S270 to S550 S270 to S550 S270 to S550 S270 to S550 S270 to S550 S270 to S550 S270 to S550 S270 to S550
Profile Width
63mm l 75mm l 90mm 63mm l 75mm l 90mm 63mm l 75mm l 90mm 200mm l 225mm l 250mm 15mm l 42mm l 55mm 15mm l 42mm l 55mm63mm to 150mm 63mm to 200mm 63mm to 250mm 75mm to 300mm 75mm to 350mm 75mm to 400mm
100mm l 140mm l 150mm 100mm l 140mm l 150mm 100mm l 140mm l 150mm 275mm l 300mm 15mm l 42mm l 40mm 15mm l 42mm l 40mm
2½” | 3” | 3½” 2½” | 3” | 3½” 2½” | 3” | 3½” 8” | 9” | 10” 15mm l 42mm l 22mm 15mm l 42mm l 22mm2½” to 6” 2½” to 8” 2½” to 10” 3” to 12” 3” to 14” 3” to 16”
4” | 5½” | 6” 4” | 5½” | 6” 4” | 5½” | 6” 11” | 12” 5/8” l 1” l 2” & 1” & 7/8” 5/8” l 1” l 2” & 1” & 7/8”
Profile Flange41mm to 51mm 41mm to 51mm 45mm to 55mm 55mm to 70mm 22mm to 55mm 22mm to 55mm 41mm to 51mm 41mm to 55mm 41mm to 70mm 41mm to 75mm 45mm to 75mm 45mm to 75mm
1” to 2” 1” to 2” 1¾” to 2⅛ 2” to 2¾” 7/8” to 2” 7/8” to 2” 1” to 2” 1” to 2” 1⅛” to 2¾” 1⅛” to 3” 1¾” to 3” 1¾” to 3”
Boxable Section Optional Optional Optional Optional No No Yes Yes Yes Yes Yes Yes
Decoiler2500 Kg 2500 Kg 2500 Kg 4000 Kg 2500 Kg 2500 Kg 2500 Kg 2500 Kg 4000 Kg 4000 Kg 8000 Kg 8000 Kg
5500 lb 5500 lb 5500 lb 8800 lb 5500 lb 5500 lb 5500 lb 5500 lb 8800 lb 8800 lb 17600 lb 17600 lb
Printer Dual Head Dual Head Dual Head Dual Head Single Head Single Head Dual Head Dual Head Dual Head Dual Head Dual Head Dual Head
Design Software
Arkitech Designer Arkitech Designer Arkitech Designer Arkitech Designer Arkitech Designer Arkitech Designer Arkitech Designer Arkitech Designer Arkitech Designer Arkitech Designer Arkitech Designer Arkitech Designer
Strucsoft MWF Strucsoft MWF Strucsoft MWF Strucsoft MWF Strucsoft MWF Strucsoft MWF Strucsoft MWF Strucsoft MWF Strucsoft MWF Strucsoft MWF Strucsoft MWF Strucsoft MWF
Vertex BD Vertex BD Vertex BD Vertex BD Vertex BD Vertex BD Vertex BD Vertex BD Vertex BD Vertex BD Vertex BD Vertex BD
Tekla Structures Tekla Structures Tekla Structures Tekla Structures Tekla Structures Tekla Structures Tekla Structures Tekla Structures Tekla Structures Tekla Structures Tekla Structures Tekla Structures
Onboard Monitor 19” Touch Screen 19” Touch Screen 19” Touch Screen 19” Touch Screen 19” Touch Screen 19” Touch Screen 19” Touch Screen 19” Touch Screen 19” Touch Screen 19” Touch Screen 19” Touch Screen 19” Touch Screen
Arkitech Mobile Viewer
Arkitech Mobile Factory
Models created from Arkitech 3D design software can be viewed with the Arkitech Mobile Viewer application on mobile devices those
support IOS or Android system. Users can choose walls, floor joists, trusses, ceiling and roof frames separately on the model during
the assembly at the site or factory. Frames or profiles can be viewed with ID numbers as individual or multiple on the viewer screen.
Helps correct assembly positioning of frames in the construction field.
-Electrical installations (wiring and lighting) in a 40ft container with double door openings at each end
-Tools required for Arkitech Mobile Factory setup
-Arkitech Framer and Decoiler – connected and ready for use
-Rotary Crane to load the Steel Coils onto the De-Coiler
-Wall mounted cabinet
-Operator’s table and chair
-Manufacturing tray
Available on the
Arkitech Advanced Construction TechnologiesMalıköy Başkent OSB Mahallesi Atatürk Blv. No: 23 Sincan / Ankara / TURKEY
T: +90 312 496 55 77 • F: +90 312 496 55 70
www.arkitech.com.tr • [email protected]