TOTAL EDEN PLUMBING CATALOGUE • Fire Protection Systems • Drainage Systems • Commercial Hot Water Systems • Acoustic Lagging • Gas Piping Systems • Stormwater Pipe and Fittings • PVC Pressure Pipe and Fittings • Industrial Piping Systems • Valves • Poly Pipe and Fittings • Electrical WWW.TOTALEDEN.COM.AU Bringing Water to Life 1300 654 040
152
Embed
TOTAL EDEN PLUMBING CATALOGUE · TOTAL EDEN PLUMBING CATALOGUE ... Cast Iron Water Fittings 74 ... BlazeMaster cPVC fire sprinkler pipe and fittings is an easy-to-use alternative
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
TOTAL EDEN PLUMBING CATALOGUE• Fire Protection Systems
• Drainage Systems
• Commercial Hot Water Systems
• Acoustic Lagging
• Gas Piping Systems
• Stormwater Pipe and Fittings
• PVC Pressure Pipe and Fittings
• Industrial Piping Systems
• Valves
• Poly Pipe and Fittings
• Electrical
WWW.TOTALEDEN.COM.AUBringing Water to Life1300 654 040
PLUMBING CATALOGUETELEPHONE 1300 65 40 40 3
DRAINAGE SYSTEMS
PLUMBING CATALOGUETELEPHONE 1300 65 40 40
CONTENTSFIRE PROTECTION 2Blazemaster cPVC Fire Sprinkler System 3
DRAINAGE SYSTEMS 6Valsir Triplus Acoustic Drainage Systems 7
Valsir HDPE Drainage Systems 13
Butt-head PVC Fittings 20
PVC DWV Pipe and Fittings 24
Clips and Saddles 29
Non Pressure Solvent Cement and Primers 30
Consumables 30
SewerPRO and SewerMAX Pipe 31
Vortex Flow - Inserts for Sewer Odour and Corrosion Control 31
HOT & COLD WATER AND GAS SYSTEMS 32Copper Pipe and Fittings 32
Copper Press-Fit Fittings 34
Commercial Hot Water Units 40
STORMWATER SYSTEMS 41Valsir Rainplus Siphonic System 42
PVC Stormwater Pipe and Fittings 44
Clips and Saddles 46
Consumables 47
BlackMAX and StormPRO Pipe and Fittings 48
Drain Pipe and Fittings 49
Pits and Drains 50
Drainage and Rain Water Outlets 51
PVC PRESSURE PIPE AND FITTINGS 64PVC Pressure Pipe 65
PVC Pressure Fittings 66
Clips and Saddles 72
Solvent Cements, Primers and Consumables 73
WATERMAIN PRESSURE PIPE AND FITTINGS 74PVC Watermain Pressure Pipe 74
Cast Iron Water Fittings 74
INDUSTRIAL PIPING SYSTEMS 77SCH 80 - Industrial Grey PVC Pipe and Fittings 78
Corzan cPVC Industrial Pipe and Fittings 82
Ipex Double Containment System 86
Clips and Saddles 87
Industrial Hose 87
Butt-Head Camlocks 88
PP Camlocks 94
PP Threaded Fittings 95
PP Barbed Fittings 97
Tank Outlets and Gaskets 98
Pressure Solvent Cement, Primers and Consumables 99
PUMPS 134Pumps - Domestic, Commercial and Industrial 134
TABLES AND CONVERSIONS 135Relevant Tables and Dimensions 135
PLUMBING CATALOGUE TOTALEDEN.COM.AU2
FIRE PROTECTION
Ease of jointing on-site provides unmatched flexibilityLight weight – effortless installation and handling on-siteEliminates scaling and corrosion for long lasting performance even in salt air environments Low flame and smoke characteristicsMinimal maintenance costsMinimal tool investment generates increased cost savingsUL/LPC fire tested and listed
FIRE SPRINKLER SYSTEMS
BLAZEMASTER® CPVC FIRE SPRINKLER SYSTEMSBlazeMaster cPVC fire sprinkler pipe and fittings is an easy-to-use alternative to traditional metal fire sprinkler systems. Utilising its cold weld joining system, there's no need for threading machines or oxy acetylene welders meaning BlazeMaster cPVC is ideal for those tough-to-get-at areas in new and retrofit applications. BlazeMaster's flexibility allows for quick, quiet and clean installation.
From a long-term reliability standpoint, BlazeMaster cPVC pipe and fittings also offers corrosion resistance (including resistance to Microbiologically Influenced Corrosion/MIC), superior hydraulics, high heat tolerances and lower flame and smoke characteristics.
Benefits of using Blazemaster cPVC:
Approved by Australian Standards: AS2118.9 - 1995 Section 7 and AS4118.2.1 - 1995 Section 5 for residential, domestic and light hazard fire sprinkler systems.
Pegasus Resort Hotel406 unit high risedevelopment.Broadbeach, Gold Coast.
Blazemaster usedthroughout.
Circle on Cavil67 and 47 storey residentialtowers - Surfers Paradise,Queensland.
Blazemaster usedthroughout.
PLUMBING CATALOGUETELEPHONE 1300 65 40 40 3
FIRE PROTECTION
CAT 10 45O ELBOWSDESCRIPTION CODE
20MM 100405659
25MM 100405660
32MM 100405661
40MM 100405662
50MM 100405663
65MM 100405664
CAT 6 END CAPSDESCRIPTION CODE
20MM 100401526
25MM 100401527
32MM 100401528
40MM 100401529
50MM 100401530
65MM 100401531
CAT 7 COUPLINGSDESCRIPTION CODE
20MM 100403686
25MM 100403687
32MM 100403688
40MM 100403689
50MM 100403690
65MM 100403691
CAT 8 REDUCING COUPLINGSDESCRIPTION CODE
25MM x 20MM 100403975
32MM x 25MM 100403976
40MM x 25MM 100403977
40MM x 32MM 100403978
50MM x 40MM 100403979
BLAZEMASTER CPVC FIRE SPRINKLER SYSTEMPIPE - 4.5M LENGTHS
DESCRIPTION BOX QTYS CODE
20MM 28 100414321
25MM 15 100414322
32MM 10 100414323
40MM 7 100414324
50MM 5 100414325
65MM 3 100414326
FI SOCKETS - NPTDESCRIPTION CODE
20MM x 3/4" 100419513
25MM x 1" 100419520
32MM x 1 1/4" 100419521
40MM x 1 1/2" 100419522
50MM x 2" 100419523
FI SOCKETS - BSPDESCRIPTION CODE
25MM x 1" 100419516
32MM x 1 1/4" 100419517
40MM x 1 1/2" 100419518
50MM x 2" 100419519
FI SPRINKLER HEAD SOCKETSDESCRIPTION CODE
20MM x 1/2" - NPT 100419514
25MM x 1/2" - NPT 100419524
25MM x 3/4" - NPT 100419515
CAT 5 REDUCING BUSHESDESCRIPTION CODE
25MM x 20MM 100400541
32MM x 20MM 100400542
32MM x 25MM 100400543
40MM x 20MM 100400544
40MM x 25MM 100400545
40MM x 32MM 100400546
50MM x 20MM 100400547
50MM x 25MM 100400548
50MM x 32MM 100400549
50MM x 40MM 100400550
65MM x 50MM 100400551
GROOVED ADAPTORSDESCRIPTION CODE
50MM 100397746
40MM 100398087
PLUMBING CATALOGUE TOTALEDEN.COM.AU4
FIRE PROTECTION
BARREL UNIONDESCRIPTION CODE
25MM 100398771
FIRE COLLARS TO SUIT BLAZEMASTERDESCRIPTION CODE
UNICOLLAR - SUITS 25MM BM 100407021
FLANGED FC40 - 32MM BM 100407025
FLANGED FC40 - 40MM BM 100407026
FLANGED FC40 - 50MM BM 100407027
FLANGED FC40 - 65MM BM 100407028
BLAZEMASTER CPVC FIRE SPRINKLER SYSTEMCAT 13 90O ELBOWS
DESCRIPTION CODE
20MM 100405879
25MM 100405880
32MM 100405881
40MM 100405882
50MM 100405883
65MM 100405884
CAT 19 TEESDESCRIPTION CODE
20MM 100422657
25MM 100422658
32MM 100422659
40MM 100422660
50MM 100422661
65MM 100422662
REDUCING TEESDESCRIPTION CODE
25MM x 20MM-C x 20MM 100423292
25MM x 25MM-C x 20MM 100423293
32MM x 25MM-C x 25MM 100423295
32MM x 32MM-C x 20MM 100423294
32MM x 32MM-C x 25MM 100423296
40MM x 40MM-C x 20MM 100423297
40MM x 40MM-C x 25MM 100423298
40MM x 40MM-C x 32MM 100423299
50MM x 50MM-C x 20MM 100423300
50MM x 50MM-C x 25MM 100423301
50MM x 50MM-C x 32MM 100423302
50MM x 50MM-C x 40MM 100423303
65MM x 65MM-C x 50MM 100423304
CROSSESDESCRIPTION CODE
20MM 100404305
25MM 100404306
32MM 100404307
40MM 100404308
50MM 100404309
CAT 16 FLANGESDESCRIPTION CODE
40MM CLASS 125/150 100407261
50MM CLASS 125/150 100407262
SPRINKLER HEAD TEESDESCRIPTION CODE
20MM x 20MM x 1/2" - NPT 100423339
25MM x 20MM x 1/2" - NPT 100423340
25MM x 25MM x 1/2" - NPT 100423341
32MM x 32MM x 1/2" - NPT 100423342
40MM x 40MM x 1/2" - NPT 100423343
50MM x 50MM x 1/2" - NPT 100423344
90O SPRINKLER HEAD ELBOWSDESCRIPTION CODE
20MM x 1/2" 100406032
25MM x 1/2" 100406034
25MM x 3/4" 100406033
32MM x 1/2" 100406035
PLUMBING CATALOGUETELEPHONE 1300 65 40 40 5
FIRE PROTECTION
ACCESSORIESDESCRIPTION CODE
DYNASET KNOCK IN x 50 100405381
KNOCK-IN ANCHORS M5 x 33 100411835
KNOCK-IN ANCHORS M5 x 25 2521995
PTFE TAPE 15MM x 6.6M BLAZEMASTER
100493842
THREAD SEALANT BLUE SEAL 473ML
100493843
SADDLES & CLIPS - GALVANISEDDESCRIPTION CODE
20MM SADDLE UL 100421400
25MM SADDLE UL 100421404
32MM SADDLE UL 100421402
40MM SADDLE UL 100421403
50MM SADDLE UL 100421404
to 20MM CLIP SIDE MOUNT UL 100421405
25MM CLIP SIDE MOUNT UL 100421406
32MM CLIP SIDE MOUNT UL 100421407
40MM CLIP SIDE MOUNT UL 100421408
50MM CLIP SIDE MOUNT UL 100421409
25MM NUT CLIP UL FOR CPVC 100421406
32MM NUT CLIP UL FOR CPVC 100498448
40MM NUT CLIP UL FOR CPVC 100498449
50MM NUT CLIP UL FOR CPVC 100498450
BLAZEMASTER CPVC FIRE SPRINKLER SYSTEMDE-BURRING TOOLS
PVC Drain Waste & Vent (DWV) non pressure pipes and fittings are available in diameters ranging from 40mm to 375mm. Total Eden stock the full range of pipes, fittings and accessories which cover most requirements and are suitable for use in residential, commercial and industrial applications.
Total Eden is the exclusive Australian distributor of Valsir Triplus, HDPE and Poly pipe fittings; which are suited to sanitary and trade waste plumbing applications. These specialised systems are at the forefront of current technology with unique properties that cover most drainage applications presented in today’s commercial buildings.
Many architects, hydraulic engineers, builders and commercial plumbers are choosing Valsir Triplus and HDPE as a way of delivering higher quality results than conventional systems can deliver.
We provide drainage solutions for a variety of applications including extreme temperatures, chemicals, laboratory, food industry, sewer waste and greasy/acid/alkali applications. So whatever your requirements, we have it covered.
PLUMBING CATALOGUETELEPHONE 1300 65 40 40 7
DRAINAGE SYSTEMS
Cert No: WMK25784AS/NZS 7671 : 2010
Cert No: WMK25784AS/NZS 7671 : 2010
Cert No: WMK25784AS/NZS 7671 : 2010
TOTALEDEN.COM.AUPLUMBING CATALOGUE
TRIPLUS - THE LATEST IN ACOUSTIC DRAINAGEThe most effective way to meet the Building Code of Australia’s strict requirements for sound insulation standards for habitable rooms.
Triplus is a triple layered polypropylene acoustic piping system for soundproofing in waste and drainage applications. It is ideally suited to high rise buildings requiring the National Construction Code’s minimum noise levels. It is lightweight and has a simple push fit rubber ring joint system that enables quick and safe installation.
The benefits of Triplus include:• Acoustically inherent sound insulating properties - no lagging required.• Suitable for hot water discharges up to 95°C.• Suitable for a range of chemicals and greasy waste - PH values between 2 and 12.• Push Fit Rubber Ring Joint - requires no solvents or welding in the joining process.• Faster installation times compared to traditional lagging methods.• Lightweight - effortless installation and handling on site.• Triplus is available in diameters ranging from 40 to 160mm with a comprehensive range
of fittings including bends, traps, junctions, vent branches and anti-vibration clips. Triplus acoustic performance will not change for the life of the building, giving engineers and devel-opers peace of mind well beyond construction.
• Triplus is manufactured from 'green friendly' polypropylene and is ideal for 'Green Star' buildings.
Valsir Triplus is exclusive to Total Eden - For enquiries contact our Customer Service on 1300 65 40 40.
TOTALEDEN.COM.AUPLUMBING CATALOGUE8
DRAINAGE SYSTEMS
87O BENDSDESCRIPTION CODE
40MM 100399946
50MM 100399947
75MM 100399948
110MM 100399943
160MM 100403344
87O SWEEP BENDSDESCRIPTION CODE
40MM 100508941
50MM 100508942
75MM 100508943
110MM 100508944
30O BENDSDESCRIPTION CODE
40MM 100399930
50MM 100399931
75MM 100399932
110MM 100399929
45O BENDSDESCRIPTION CODE
40MM 100399936
50MM 100399937
75MM 100399938
110MM 100399933
160MM 100399934
15O BENDSDESCRIPTION CODE
40MM 100399926
50MM 100399927
75MM 100399928
110MM 100399925
160MM 100403346
TRIPLUS - THE LATEST IN ACOUSTIC DRAINAGENote: Triplus sizing is the OD measurement
TRIPLUS PIPE - 3M, 1M, 0.5M, 0.25M AND 0.15M LENGTHS
DESCRIPTION CODE
40MM x 3M 100414913
50MM x 3M 100414917
75MM x 3M 100414921
110MM x 3M 100414899
160MM x 3M 100414908
40MM x 1M 100414914
50MM x 1M 100414918
75MM x 1M 100414923
110MM x 1M 100414901
160MM x 1M 100414909
40MM x 0.5M 100414911
50MM x 0.5M 100414915
75MM x 0.5M 100414919
110MM x 0.5M 100414897
160MM x 0.5M 100414906
40MM x 0.25M 100414912
50MM x 0.25M 100414916
75MM x 0.25M 100414920
110MM x 0.25M 100414898
160MM x 0.25M 100414907
75MM x 0.15M 100414922
110MM x 0.15M 100414900
PLUMBING CATALOGUETELEPHONE 1300 65 40 40 9
DRAINAGE SYSTEMS
45O JUNCTION DOUBLEDESCRIPTION CODE
110MM 100410718
TRIPLUS - THE LATEST IN ACOUSTIC DRAINAGENote: Triplus sizing is the OD measurement
87O REDUCING JUNCTIONSDESCRIPTION CODE
75MM - 50MM 100410803
110MM - 50MM 100410798
110MM - 75MM 100410799
160MM - 110MM 100410800
160MM - 125MM 100410801
87O JUNCTIONSDESCRIPTION CODE
40MM - 40MM 100410846
50MM - 50MM 100410847
75MM - 75MM 100410848
110MM - 110MM 100410844
160MM - 160MM 100410845
87O SWEEP JUNCTIONSDESCRIPTION CODE
110MM 100525475
87O SWEEP JUNCTION DOUBLEDESCRIPTION CODE
110MM 100525473
PAN COLLARDESCRIPTION CODE
100MM 10040366
FLOOR WASTE GULLYDESCRIPTION CODE
110MM x 75MM
50MM x 50MM
100407648
45O JUNCTIONSDESCRIPTION CODE
40MM - 40MM 100410841
50MM - 50MM 100410842
75MM - 75MM 100410843
110MM - 110MM 100410838
160MM - 160MM 100410839
45O REDUCING JUNCTIONSDESCRIPTION CODE
75MM - 50MM 100410797
110MM - 50MM 100410792
110MM - 75MM 100410793
160MM - 110MM 100410794
160MM - 125MM 100410795
TOTALEDEN.COM.AUPLUMBING CATALOGUE10
DRAINAGE SYSTEMS
ECCENTRIC REDUCERSDESCRIPTION CODE
50MM - 40MM 100417718
75MM - 50MM 100417719
110MM - 50MM 100417713
110MM - 75MM 100417714
160MM - 110MM 100417715
160MM - 125MM 100417716
END CAPDESCRIPTION CODE
40MM 100419618
50MM 100419619
75MM 100419620
110MM 100419616
160MM 100419617
END CAP - RETAINING CLIP TRIPLUSDESCRIPTION CODE
110MM 100406730
LEVEL INV TAPERSDESCRIPTION CODE
110MM - 75MM 100601615
75MM – 50MM 100601614
SIPHON TRAPDESCRIPTION CODE
110MM 100404773
COUPLINGSDESCRIPTION CODE
40MM 100419459
50MM 100419460
75MM 100419461
110MM 100419456
160MM 100419457
VENTILLATION BRANCH DESCRIPTION CODE
110MM - RIGHT 100400367
110MM - LEFT 100493848
110MM - CENTRE 100493849
110MM - CENTRE LEFT 100493850
110MM - CENTRE RIGHT 100393851
SLIP COUPLINGS - WITHOUT CENTRE STOPDESCRIPTION CODE
40MM 100420128
50MM 100420129
75MM 100420130
110MM 100420127
160MM 100403346
TRIPLUS - THE LATEST IN ACOUSTIC DRAINAGENote: Triplus sizing is the OD measurement
PLUMBING CATALOGUETELEPHONE 1300 65 40 40 11
DRAINAGE SYSTEMS
PVC ADAPTORSDESCRIPTION CODE
40MM x 40MM 100398195
50MM x 50MM 100398196
75MM x 65MM 100398197
TRANSITION GROMMETDESCRIPTION CODE
Triplus 50mm x OD 46/55 100409036
Triplus 50mm x OD 36/40 100409035
TRANSITION GROMMETDESCRIPTION CODE
Triplus 50mm x OD 46/55 100409036
Triplus 50mm x OD 36/40 100409035
FOUR WAY RISERDESCRIPTION CODE
110MM X 50MM 100418121
RUBBER ADAPTORSDESCRIPTION CODE
40MM 100403833
40MM x 32MM 100398198
50MM 100403834
50MM x 63MM 100398078
80MM 100403836
100MM 100403826
TRIPLUS - THE LATEST IN ACOUSTIC DRAINAGENote: Triplus sizing is the OD measurement
INSPECTION PIECESDESCRIPTION CODE
50MM 100414045
75MM 100414046
110MM 100414042
160MM 100414043
TOTALEDEN.COM.AUPLUMBING CATALOGUE12
DRAINAGE SYSTEMS
TRIPLUS - THE LATEST IN ACOUSTIC DRAINAGENote: Triplus sizing is the OD measurementNote: Triplus sizing is the OD measurement
To minimise noise levels in waste and drainage systems, not only should the system be properly designed and the waste circuit mounted correctly, but it is also important to choose a system with an elevated soundproofing performance.
Valsir’s Triplus piping systems challenge the traditional approach of acoustic lagging and allow waste systems to be installed that guarantee excellent sound proofing performance.
These systems meet the National Construction Code (NCC) 2013 (Building Code of Australia – BCA) acoustic requirements (Rw + Ctr 40) for habitable rooms – when tested without acoustic lagging and using an industry standard ceiling structure (13mm plasterboard and 75mm R1.5 insulation batt).
The Triplus piping system has recently been tested by the CSIRO (Report MA151/R1 June 2013) and appraised by Day Design – Consulting Acoustical Engineers (Report 5116-1.2L July 2013).
ACOUSTIC PERFORMANCETRIPLUS PIPE WITHOUT LAGGING
FIRE COLLARS TO SUIT TRIPLUSDESCRIPTION CODE
SNAP 40-50MM 100407012
SNAP 65-110MM 100407013
SNAP 150MM 100407011
SNAP 50MM FLOOR WASTE 100407016
SNAP 65-100MM FLOOR WASTE 100407017
PROMASTOP UNICOLLAR WALL 100407043
PROMASEAL FC150 WALL - 150MM 100407024
SPARE RUBBER RINGSDESCRIPTION CODE
40MM 100418061
50MM 100418062
75MM 100418063
110MM 100418065
160MM 100418066
ADAPTOR - TRIPLUS TO SILEREDESCRIPTION CODE
58mm Silere x Triplus 50mm 100397504
78mm Silere x Triplus 75mm 100397511
50mm Triplus x Silere 58mm 100397502
75mm + Triplus x Silere 78mm 100397510
PIPE CLIPS WITH ANITI-VIBRATION RUBBER LININGDESCRIPTION CODE
40MM M10 FIXED/SLIDING 100414161
50MM M10 FIXED/SLIDING 100414162
75MM M10 FIXED/SLIDING 100414166
110MM M10 FIXED/SLIDING 100414157
160MM M10 FIXED/SLIDING 100414160
ALL THREAD ROD AND FIXINGSDESCRIPTION CODE
10MM X 3M THREADED ROD 100418459
DYNASET / KNOCK-IN 10MM 100405381
PURLIN HANGER M-10 HD 1004171787
BEVELLING TOOL & ACCESSORIESDESCRIPTION CODE
PIPE BEVELLING TOOL 100414060
BEVELLING TOOL REPLACEMENT BLADES
100399098
BEVELLING TOOL REPLACEMENT PLATES [BOTH]
100415713
LUBRICANTDESCRIPTION CODE
250ML 100411647
1LT 100411653
PLUMBING CATALOGUETELEPHONE 1300 65 40 40 13
DRAINAGE SYSTEMSDRAINAGE SYSTEMSDRAINAGE SYSTEMS
TOTALEDEN.COM.AUPLUMBING CATALOGUE
VALSIR® HDPE DRAINAGE SYSTEMHigh Density Polyethylene waste pipe and fittings for sanitary and tradewaste applications.
Total Eden is committed to supplying the very best products to its customers and isproudly the exclusive Australian distributor for Valsir HDPE drainage pipe and fittings.
Suitable for “Butt” or “Electrofusion” welding, Valsir HDPE is available in a range of sizes from 50mm to 315mm diameter making it suitable for sanitary, trade and laboratory waste as well as stormwater discharge in domestic, commercial and industrial applications.
Able to handle hot water discharge up to 95º C, Valsir HDPE has an operating PH range of 0 to 14 making it ideal for acid and alkali chemical applications. Operating within these limits will ensure Valsir HDPE will not corrode during the lifetime of the building. All Valsir HDPE pipes are annealed to ensure stability in product dimensions.
Valsir HDPE pipe and fittings are environmentally friendly and suitable for above andbelow ground applications.
South MelbourneLifestyle Centre
Contractor:Tullamarine PlumbingValsir HDPE used throughout
DRAINAGE SYSTEMSDRAINAGE SYSTEMS
TOTALEDEN.COM.AUPLUMBING CATALOGUE14
DRAINAGE SYSTEMS
HDPE PIPE - 5M STANDARD LENGTHS 15O & 30O BENDS
ELECTROFUSION COUPLINGS
45O BENDS
90O BENDS
88.5O BENDS
HDPE DRAINAGE SYSTEM - PIPE SIZE EQUIVALENCE
CAP ADAPTORS
VALSIR HDPE DRAINAGE SYSTEMS
32MM
40MM
50MM
56MM
63MM
75MM
90MM
110MM
125MM
160MM
200MM - SDR33
250MM - SDR33
315MM - SDR33
200MM - SDR26
250MM - SDR26
315MM - SDR26
110MM - 15º
110MM - 30º
40MM
50MM
56MM
63MM
75MM
90MM
110MM
125MM
160MM
200MM
250MM
315MM
32MM
40MM
50MM
56MM
63MM
75MM
90MM
110MM
125MM
160MM
200MM
250MM*
315MM*
40MM
50MM
56MM
63MM
75MM
90MM
110MM
125MM
160MM
200MM*
250MM*
315MM*
32MM
40MM
50MM
56MM
63MM
75MM
90MM
110MM
110MM - SWEEP
125MM
160MM
56MM
75MM
100414291
100414297
100414292
100414293
100414294
100414295
100414296
100414285
100414286
100414287
100414288
100414289
100414290
100414984
100414985
100414986
100399331
100399397
100403607
100403608
100403609
100403610
100403611
100403612
100403601
100403602
100403603
100403604
100403605
100403606
100399489
100399490
100399425
100399426
100399427
100399428
100399429
100399419
100399420
100399421
100399422
100399423
100399424
100399696
100399697
100399698
100399699
100399700
100399701
100399636
100399695
100399637
100399632
100399633
100399634
100399612
4330170
100399576
100399577
100399578
100399579
100399580
100399573
100399883
100399574
100399575
100404224
100404225
DESCRIPTION DESCRIPTION
DESCRIPTION
DESCRIPTION
DESCRIPTION
DESCRIPTION
DESCRIPTION
CODE CODE
CODE
CODE
CODE
CODE
CODE
Note: Valsir HDPE sizing is the OD measurement
* Denotes wide radius segemented bend
* Denotes wide radius segemented bend
PLUMBING CATALOGUETELEPHONE 1300 65 40 40 15
DRAINAGE SYSTEMS
45O REDUCING JUNCTIONS
45O REDUCING JUNCTIONS
50MM X 40MM
56MM X 50MM
63MM X 50MM
63MM X 56MM
75MM X 40MM
75MM X 50MM
75MM X 56MM
75MM X 63MM
90MM X 40MM
90MM X 50MM
90MM X 56MM
90MM X 63MM
90MM X 75MM
110MM X 40MM
110MM X 50MM
110MM X 56MM
110MM X 63MM
110MM X 75MM
110MM X 90MM
125MM X 40MM
125MM X 50MM
125MM X 56MM
125MM X 63MM
125MM X 75MM
125MM X 90MM
125MM X 110MM
160MM X 40MM
160MM X 50MM
160MM X 56MM
160MM X 63MM
160MM X 75MM
160MM X 90MM
160MM X 110MM
160MM X 125MM
200MM X 40MM
200MM X 50MM
200MM X 56MM
200MM X 63MM
200MM X 75MM
200MM X 90MM
200MM X 110MM
200MM X 125MM
200MM X 160MM
250MM X 40MM
250MM X 50MM
250MM X 56MM
250MM X 63MM
250MM X 75MM
250MM X 90MM
250MM X 110MM
250MM X 125MM
250MM X 160MM
250MM X 200MM
315MM X 40MM
315MM X 50MM
315MM X 56MM
315MM X 63MM
315MM X 75MM
315MM X 90MM
315MM X 110MM
315MM X 125MM
315MM X 160MM
315MM X 200MM
315MM X 250MM
100410599
100410600
100410743
100410744
4330310
100410745
100410538
100410601
100410602
100410746
100410747
100410748
100410749
100410589
100410725
100410726
100410727
100410728
100410729
100410590
100410591
100410592
100410593
100410730
100410731
100410732
4330720
100410608
100410609
100410610
100410594
100410611
100410530
100410733
100410612
100410613
100410614
100410615
100410617
100410616
100410734
100410595
100410735
100410619
100410618
4330850
100410620
100410621
100410622
100410737
100410596
100410738
100410736
4330890
100410623
4330910
100410624
100410625
100410626
100410741
100410597
100410742
100410739
100410740
DESCRIPTION
DESCRIPTION
CODE
CODE
VALSIR HDPE DRAINAGE SYSTEMSNote: Valsir HDPE sizing is the OD measurement
45O EQUAL JUNCTIONS [OB]
40MM
50MM
56MM
63MM
75MM
90MM
110MM
125MM
160MM
200MM
250MM
315MM
100410598
100410534
100410535
100410536
100410537
100410539
100410527
100410528
100410529
100410531
100410532
100410533
DESCRIPTION CODE
88.5O JUNCTIONS & SWEEP JUNCTION
50MM
56MM
63MM
75MM
90MM
110MM
110MM - SWEEP
125MM
160MM
200MM
250MM
315MM
100410682
100410683
100410684
100410685
100410686
100410679
100410813
100410680
100410681
100410676
100410677
100410678
DESCRIPTION CODE
TOTALEDEN.COM.AUPLUMBING CATALOGUE16
DRAINAGE SYSTEMS
45O DOUBLE JUNCTION
ECCENTRIC REDUCERS
VALSIR HDPE DRAINAGE SYSTEMS
110MM X 110MM
50MM X 40MM
63MM X 40MM
56MM X 50MM
63MM X 50MM
63MM X 56MM
75MM X 50MM
75MM X 56MM
75MM X 63MM
90MM X 40MM
90MM X 50MM
90MM X 56MM
90MM X 63MM
90MM X 75MM
110MM X 50MM
110MM X 56MM
110MM X 63MM
110MM X 75MM
125MM X 56MM
110MM X 90MM
125MM X 50MM
125MM X 63MM
125MM X 75MM
125MM X 90MM
125MM X 110MM
160MM X 110MM
160MM X 125MM
200MM X 125MM
100410540
100417657
100417658
100417680
100417697
100417681
100417682
100417683
100417684
100417659
100417685
100417688
100417686
100417687
100417667
100417668
100417669
100417670
100417672
100417666
100417671
100417673
100417674
100417675
100417676
100417677
100417678
100417679
DESCRIPTION
DESCRIPTION
CODE
CODE
Note: Valsir HDPE sizing is the OD measurement
LONG ECCENTRIC REDUCERS - LIT IN PIPE REDUCING ADAPTORS
CONCENTRIC REDUCERS
RING SEAL SOCKETS - INC PLUG - BUTT WELD ONLY
EXPANSION SOCKETS
160MM X 110MM
200MM X 110MM
200MM X 160MM
250MM X 200MM
315MM X 200MM
315MM X 250MM
100MM X 56MM
110MM X 50MM COPPER
110MM X 50MM FLEXI FIN
56MM X 50MM
63MM X 50MM
63MM X 56MM
75MM X 63MM
90MM X 63MM
90MM X 75MM
110MM X 50MM
110MM X 56MM
110MM X 63MM
110MM X 75MM
110MM X 90MM
160MM X 110MM
50MM
56MM
63MM
75MM
90MM
110MM
160MM
40MM
50MM
56MM
63MM
75MM
90MM
110MM
125MM
160MM
200MM
250MM
315MM
100417660
100417661
100417662
100417663
100417664
100417665
100417768
100417769
100417767
100417497
100417490
100417498
100417499
100417500
100417501
100417491
100417492
100417493
100417494
100417495
100417496
100419686
100419687
100419688
100419689
100419690
100419684
100419685
100406878
100419470
100419471
100419472
100419473
100419474
100419465
100419466
100419467
100406877
100419468
100419469
DESCRIPTION DESCRIPTION
DESCRIPTION
DESCRIPTION
DESCRIPTION
CODE CODE
CODE
CODE
CODE
PLUMBING CATALOGUETELEPHONE 1300 65 40 40 17
DRAINAGE SYSTEMS
THREADED END CAPS & SLEEVES
BLANK ENDS
CAP & SEALS
ACCESS PIPE - SCREW CAP
VALSIR HDPE DRAINAGE SYSTEMS
50MM
56MM
63MM
75MM
110MM
50MM
56MM
63MM
75MM
110MM
160MM
50MM
56MM
63MM
75MM
110MM
50MM
56MM
63MM
75MM
90MM
110MM
160MM
200MM
250MM
315MM
100406757
100406758
100406759
100406760
100406756
100406660
100406661
100406662
100406663
100406658
100406659
100406752
100406753
100406754
100406755
100406751
100414037
100414038
100414039
100414040
100414041
100414032
100414033
100414034
100414035
100414036
DESCRIPTION
DESCRIPTION
DESCRIPTION
DESCRIPTION
CODE
CODE
CODE
CODE
Note: Valsir HDPE sizing is the OD measurement
FOUR WAY RISERS
PUDDLE FLANGE
FIXED PALAZZI TRAPS
FIXED TRAP
ADJUSTABLE TRAPS
WC PAN COLLAR - RRJ
90 X 75 X 75 X 75 X 75MM
110 X 56 X 50 X 56 X 50MM
110 X 56 X 56 X 56 X 56MM
110 X 63 X 63 X 63 X 63MM
110MM
90MM X 75MM
110MM X 63MM
110MM X 75MM
110MM
110MM X 110MM
50MM X 50MM
50MM X 56MM
110MM
90MM X 80MM
433 0480
100418115
100418116
100418117
100407412
100415432
100423910
100423911
100423897
100423879
100423871
100423872
100403042
100413938
DESCRIPTION
DESCRIPTION
DESCRIPTION
DESCRIPTION
DESCRIPTION
DESCRIPTION
CODE
CODE
CODE
CODE
CODE
CODE DISCONNECTOR TRAP - FIXED
110MM 100423882
DESCRIPTION CODE
TOTALEDEN.COM.AUPLUMBING CATALOGUE18
DRAINAGE SYSTEMS
DISCONNECTOR TRAP
P TRAPS - FIXED
CAP AND LININGS
RUBBER ADAPTORS PVC & COPPER
ADAPTORS PVC & COPPER
VALSIR HDPE DRAINAGE SYSTEMS
110MM - INCLUDES NUT
50MM
56MM
50MM X 1 1/2”
50MM X 1 1/2” - EXTENDED
LINING
40MM PVC X 63MM HDPE
40MM COPP X 50MM HDPE
50MM COPP X 63MM HDPE
40MM PVC X 50MM HDPE
40MM COPP X 50MM HDPE
50MM COPP X 50MM HDPE*
50MM PVC X 56MM HDPE*
50MM COPP X 56MM HDPE
50MM COPP X 63MM HDPE
65MM COPP X 75MM HDPE
100MM COPP X 110MM HDPE
WHITE
100MM PVC X 110MM HDPE*
100423881
100423903
100423904
100401775
100401771
100398080
100398078
100398079
100397628
100397627
100419686
100419687
100397629
100397630
100397631
100397632
100419684
DESCRIPTION
DESCRIPTION
DESCRIPTION
DESCRIPTION
DESCRIPTION
CODE
CODE
CODE
CODE
CODE
* Standard Ring Seal Socket
Note: Valsir HDPE sizing is the OD measurement
ADAPTORS - FI & MI
VENTILATION BRANCHES
SLAB REPAIR ADAPTORS
STUB FLANGE ADAPTORS - SDR26
50MM X 1 1/2” - FEMALE
50MM X 1 1/2” - MALE
56MM X 2” - FEMALE
56MM X 2” - MALE
63MM X 2” - FEMALE
63MM X 2” - MALE
75MM X 2 1/2” - FEMALE
75MM X 2 1/2” - MALE
110MM
160MM
56MM
110MM
75MM
110MM
160MM
100398184
100398188
100398185
100398189
100398186
100398190
100398187
100398191
100424786
100424787
100409516
433 0560
100398144
100421241
100421242
DESCRIPTION
DESCRIPTION
DESCRIPTION
DESCRIPTION
CODE
CODE
CODE
CODE
BACKING RINGS - GALVANISED
75MM TABLE E
75MM TABLE D
110MM TABLE E
110MM TABLE D
160MM TABLE E
160MM TABLE D
100398610
100398605
100398615
100398585
100398622
100398587
DESCRIPTION CODE
PLUMBING CATALOGUETELEPHONE 1300 65 40 40 19
DRAINAGE SYSTEMS
ELECTROFUSION MACHINES
LEADS
PLUGS
HAND BUTT WELDING PLATE 230V
PIPE CUTTERS AND TOOLS
LUBRICANT & WIPES
POWER SUPPLY
BUTT WELDING MACHINES
VALSIR HDPE DRAINAGE SYSTEMS
40MM - 160MM - MUSTANG
50MM - 315MM - UNVERSAL
50MM - 160MM - MUSTANG
50MM - 315MM - UNIVERSAL
50MM - 160MM - YELLOW
200MM - 315MM - BLUE
50MM - 160MM
PIPE CUTTER 50MM - 140MM
PIPE SCRAPER
SCRAPING KNIFE
PIPE BEVELLER 50MM -160MM
250ML TUBE
WIPES
CORD WITH PLUG - 240V,
15 AMP
50MM - 160MM - VALSIR
PRATICA
90MM - 315MM - VALSIR MAXI
100426594
100426595
100411321
100402012
100415644
100415487
100426598
100414262
100414958
100411206
100414060
100411647
100426660
100409518
100426592
100426590
DESCRIPTION
DESCRIPTION
DESCRIPTION
DESCRIPTION
DESCRIPTION
DESCRIPTION
DESCRIPTION
DESCRIPTION
CODE
CODE
CODE
CODE
CODE
CODE
CODE
CODE
Information provided as a guide only, please refer to manufacturers website for technical specifications & information. www.valsir.it
VIBRALAG TM | Acoustic LaggingVibralag is a time and cost e�ective solution for treating noisy waste, supply and storm water pipes. It has been designed to meet and exceed the acoustic requirements of the Building Code of Australia ( BCA) when coupled with standard riser and building systems.
The product is a composite of three layers of di�erent materials, each serving their own very speci�c purposes:• The aluminium foil on the outside provides the desired
�re and �ame resistance rating.• The heavy and �exible barium loaded rubber
composite middle core, provides the ‘limp mass’ in trapping the noise.
• The inner layer of convoluted foam is for ‘mass-decoupling’ the limp mass from the noise radiating pipe wall and also bene�ts by absorbing the noise being trapped inside the lagging.
Vibralag is available in two weights: 5 kg/m 2 and 8 kg/m 2
INSTALLATION GUIDE Vibralag is supplied in rolls. The standard length of each roll is 4m long and 1m wide. Aluminium ducting tape is recommended to be used on all laps and joints. The table below is a conservative coverage guide for commonly used pipe sizes. This calculation is based on a minimum of 25mm lapping, plus cutting wastages.
Pipe Diameter One Roll Lags (Lineal Metres)
50mm Approx. 12m
100mm Approx. 8m
150mm Approx. 6m
200mm Approx. 4 m
VIBRALAG ACOUSTIC LAGGINGDESCRIPTION CODE
40MM x 40MM 100398195
50MM x 50MM 100398196
75MM x 65MM 100398197
Quieter plumbing through waterpipe insulationVIBRALAG™
Acoustic LaggingVIBRALAG™ | ACOUSTIC LAGGINGVibralag is a time and cost effective solution for treating noisy waste, supply and storm water pipes. It has been designed to meet and exceed the acoustic requirements of the Building Code of Australia (BCA) when coupled with standard riser and building systems.
The product is a composite of three layers of different materials, each serving their own very specific purposes:
• The aluminium foil on the outside provides the desired fire and flame resistance rating.• The heavy and flexible barium loaded rubber composite middle core, provides the ‘limp mass’
in trapping the noise.• The inner layer of convoluted foam is for ‘massdecoupling’ the limp mass from the noise radiating
pipe wall and also benefits by absorbing the noise being trapped inside the lagging.
Vibralag is available in two weights: 5kg/m2 and 8kg/m2 (on request). Generally, the heavier the lagging material the better they perform. In most cases, the 5kg/m2 Vibralag is sufficient.
BENEFITS• Effective sound absorption and attenuation.• Easy to use and install.• Material easy to cut to size with basic cutting tools.• Time and cost effective solution to aid compliance with the BCA.• Versatile range of environmental applications.
INSTALLATION GUIDEVibralag is supplied in rolls. The standard length of each roll is 4m long and 1m wide. Aluminium ducting tape is recommended to be used on all laps and joints. The table to the left is a conservative coverage guide for commonly used pipe sizes. This calculation is based on a minimum of 25mm lapping, plus cutting wastages.
VIBRALAG TM | Acoustic LaggingVibralag is a time and cost e�ective solution for treating noisy waste, supply and storm water pipes. It has been designed to meet and exceed the acoustic requirements of the Building Code of Australia ( BCA) when coupled with standard riser and building systems.
The product is a composite of three layers of di�erent materials, each serving their own very speci�c purposes:• The aluminium foil on the outside provides the desired
�re and �ame resistance rating.• The heavy and �exible barium loaded rubber
composite middle core, provides the ‘limp mass’ in trapping the noise.
• The inner layer of convoluted foam is for ‘mass-decoupling’ the limp mass from the noise radiating pipe wall and also bene�ts by absorbing the noise being trapped inside the lagging.
Vibralag is available in two weights: 5 kg/m 2 and 8 kg/m 2
INSTALLATION GUIDE Vibralag is supplied in rolls. The standard length of each roll is 4m long and 1m wide. Aluminium ducting tape is recommended to be used on all laps and joints. The table below is a conservative coverage guide for commonly used pipe sizes. This calculation is based on a minimum of 25mm lapping, plus cutting wastages.
Pipe Diameter One Roll Lags (Lineal Metres)
50mm Approx. 12m
100mm Approx. 8m
150mm Approx. 6m
200mm Approx. 4 m
PIPE DIAMETER ONE ROLL LAGS (lineal metres of pipe)
50mm Approx. 12m
100mm Approx. 8m
150mm Approx. 6m
200mm Approx. 4m
TOTALEDEN.COM.AUPLUMBING CATALOGUE24
DRAINAGE SYSTEMS
PIPE - 6M LENGTHS - SWJ
SN6 PIPE - 6M LENGTHS - SWJ
SN8 PIPE - 3M LENGTHS - SWJ
SN8 PIPE - 3M LENGTHS - RRJ
PLAIN COUPLINGS
REPAIR COUPLINGS
FI COUPLINGS
MI COUPLINGS
5O BENDS
15O BENDS
PVC DWV PIPE AND FITTINGS
40MM
50MM
65MM
80MM
100MM
150MM
225MM
300MM
100MM - SLOTTED
150MM - SEH
150MM - SEH - SLOTTED
225MM - SEH
150MM - SEH
225MM - SEH
40MM
50MM
65MM
80MM
100MM
150MM
225MM
100MM - SLIP
150MM - SLIP
100MM - 2 PART
150MM - 2 PART
40MM X 1 1/2”
50MM X 2”
40MM X 1 1/2”
50MM X 2”
100MM X 4”
100MM F+F
150MM F+F
100MM M+F
100MM F+F
100MM M+F
150MM F+F
225MM F+F
150MM F+F
100403568
100403569
100403570
100403571
100403565
100403566
100403567
100404196
100403586
100403583
100403584
100403552
100403554
100403551
100403553
100403547
100399550
100399551
100399553
100399318
100399329
100399319
100399320
100399330
100414302
100414303
100414304
100414305
100414311
100414306
100414307
100414308
100415001
100414301
327 3913
100414313
100414309
100414310
DESCRIPTION
DESCRIPTION
DESCRIPTION
DESCRIPTION
DESCRIPTION
DESCRIPTION
DESCRIPTION
DESCRIPTION
DESCRIPTION
DESCRIPTION
CODE CODE
CODE
CODE
CODE
CODE
CODE
CODE
CODE
CODE
PLUMBING CATALOGUETELEPHONE 1300 65 40 40 25
DRAINAGE SYSTEMS
CODE
CODE
CODE
CODE
CODE
CODE
CODE
CODE
CODE
CODE
CODE
CODE
60O BENDS
30O BENDS
45O BENDS
85O BENDS
85O BENDS (CONTINUED)
45O JUNCTIONS “OB”
45O REDUCERS
85O REDUCERS
85O JUNCTIONS
PVC DWV PIPE AND FITTINGS
100MM M+F
100MM F+F
100MM M+F
150MM F+F
225MM F+F
40MM F+F
40MM M+F
50MM F+F
50MM M+F
65MM F+F
65MM M+F
80MM F+F
100MM F+F
100MM M+F
100MM F+F - IO
100MM F+F - ACCESS
150MM F+F
150MM M+F
225MM F+F
300MM F+F
40MM F+F
40MM F+F IO
50MM F+F
50MM M+F
50MM F+F IO
65MM F+F
65MM M+F
80MM F+F
100MM F+F
100MM M+F
100MM F+F - IO
100MM F+F - REAR ACCESS
100MM F+F - STD. ACCESS
150MM F+F
150MM M+F
225MM F+F
300MM F+F
40MM F+F
50MM F+F
100MM F+F
150MM F+F
225MM F+F
100MM F+F - RH ACCESS
100MM F+F - LH ACCESS
100MM X 50MM F+F
100MM X 65MM F+F
150MM X 100MM F+F
225MM X 100MM F+F
225MM X 150MM F+F
300MM X 150MM F+F
150MM X 100MM F+F
225MM X 100MM F+F
225MM X 150MM F+F
40MM F+F
40MM F+F - IO
50MM F+F
50MM F+F - IO
65MM F+F
80MM F+F
100MM F+F
100MM M+F
100MM F+F - IO
100MM F+F - REAR ACCESS
150MM F+F
225MM F+F
100399556
100399393
100399396
100399394
479 0035
100399464
100399478
100399465
100399479
100399466
100399480
100399467
100399459
100399475
100399468
100399474
100399460
100399476
100399461
100399462
100399593
100399598
100399594
100399607
100399599
100399595
100399330
100399596
100399589
100399603
100399597
100399667
100399668
100399590
100399604
100399665
100399666
100410556
100410557
100410548
100410550
100410553
100410569
100410568
100410825
100410826
100410827
100410828
100410829
100410831
100410833
100410834
100410835
100410816
100410689
100410817
100410821
100410818
100410819
100410814
100410823
100410820
100410822
100410815
100410824
DESCRIPTION
DESCRIPTION
DESCRIPTION
DESCRIPTION
DESCRIPTION
DESCRIPTION
DESCRIPTION
DESCRIPTION
DESCRIPTION
CODE
CODE
CODE
CODE
CODE
CODE
CODE
CODE
CODE
TOTALEDEN.COM.AUPLUMBING CATALOGUE26
DRAINAGE SYSTEMS
CODE
CODE
CODE
CODE
CODE
CODE
85O RISER JUNCTION - M+F
87O RISER JUNCTION - M+F
TEST OPENINGS
LEVEL INVERT TAPERS - LIT
ECCENTRIC SOCKET REDUCERS
ECCENTRIC PIPE REDUCERS
FI ADAPTORS
MI ADAPTORS
THREADED CAPS
DUST CAPS
PUSH ON CAPS
PVC DWV PIPE AND FITTINGS
100MM X 50MM X 50MM X
50MM X 40MM
80MM X 50MM X 40MM X 40MM X 40MM
65MM F+F
100MM F+F
100MM F+F WITH EXP COUPLING
100MM M+F
150MM F+F
50MM X 40MM65MM X 40MM65MM X 50MM80MM X 40MM80MM X 50MM80MM X 65MM100MM X 50MM100MM X 65MM100MM X 80MM150MM X 100MM225MM X 100MM225MM X 150MM300MM X 100MM300MM X 150MM300MM X 225MM
50MM X 40MM65MM X 40MM65MM X 50MM80MM X 50MM100MM X 40MM100MM X 50MM100MM X 65MM100MM X 80MM150MM X 100MM
For a full range of StormPro Fittings see page 46.
CODE CODE
REDUCED CORROSION EXTENDS SEWER LIFEHydrogen sulfide (H2S) emissions from forcemain discharges can literally eat through a concrete drop manhole. By oxidizing dissolved H2s, a Vortex Flow Insert in a municipal sewer drop can significantly reduce concrete and metal corrosion, extending sewer life and saving the municipality money.
ELIMINATES ODOUR TREATMENT COSTSBy increasing dissolved oxygen levels in wastewater and oxidizing sulfides and other odorous compounds, the use of a Vortex Flow Insert in a drop structure eliminates the need for costly chemical injection, high-maintenance biofilters and air scrubbers.
IMPROVES WASTE WATER QUALITYBecause a Vortex drop structure reduces the odorous and corrosive elements in the flow, a Vortex Flow Insert, installed upstream of a treatment plant, can actually improve wastewater quality prior to treatment, reducing treatment costs at sewage plants.
REDUCED MAINTENANCE COSTSThe use of a Vortex drop structure eliminates the corrosion ofconcrete and metal sewer components, dramatically reducingmunicipal maintenance costs of manholes and sewers.
Manholes, chambers and pumping stations are built in a variety of sizes. For that reason, Ipex custom designs and custom builds everyVortex Flow Insert.
Ipex VFIs are sized based on peak flow that the unit is required to handle. The insert can be installed in a standard manhole without restricting access for maintenance.
PLUMBING CATALOGUE TOTALEDEN.COM.AU32
HOT & COLD WATER SYSTEMS AND GAS SYSTEMSHOT & COLD WATER SYSTEMS AND GAS SYSTEMS
COPPER TUBE TYPE B - 6 METRE LENGTHS
ANNEALED COPPER TUBE - 18 METRE LENGTHS
COPPER PIPE AND FITTINGS
12.7MM X 0.91MM HHS X 6M
19.05MM X 1.02MM HHS X 6M
25.4MM X 1.22MM HDS X 6M
31.75MM X 1.22MM HDS X 6M
38.1MM X 1.22MM HDS X 6M
50.8MM X 1.22MM HDS X 6M
63.5MM X 1.22MM HDS X 6M
76.2MM X 1.63MM HDS X 6M
101.6MM X 1.63MM HDS X 6M
127.0MM x 1.63M WT DN125
152.4MM x 2.03M WT DN150
203.2MM x 2.03M WT DN200
12.7MM X 0.91MM HHS X 18M
15.88MM OD X 1.02MM WT X 18M
19.05MM OD X 1.02MM WT X 18M
100461058
100461060
100461071
100461072
100461073
100461074
100461075
100461076
100461078
100461079
100461080
100461081
100461082
100461083
100461084
DESCRIPTION CODE
DESCRIPTION CODE
45O BEND F+F
90O BEND SHORT RADIUS F+F
25MM
32MM
40MM
50MM
65MM
80MM
100MM
125MM
150MM
25MM
32MM
40MM
50MM
65MM
80MM
100MM
125MM
150MM
100399842
100399825
100399826
100399827
100399828
100399829
100399819
100399820
100399821
100399842
100399847
100399848
100399849
100399850
100399851
100399843
100399845
100399846
DESCRIPTION CODE
DESCRIPTION CODE
90O ELBOW F+F CAPILLARY
15MM
20MM
25MM
100401514
100401516
100401517
DESCRIPTION CODE
REDUCING TEE
20MM X 20MM X 15MM-C
25MM X 25MM X 15MM-C
25MM X 25MM X 20MM-C
20MM X 20MM-C X 15MM
25MM X 25MM-C X 15MM
25MM X 25MM-C X 20MM
20MM X 15MM-C X 15MM
25MM X 20MM-C X 20MM
100423160
100423164
100423165
100423159
100423162
100423163
100423158
100423161
DESCRIPTION CODETEE EQUAL F+F
15MM
20MM
25MM
32MM
40MM
50MM
65MM
80MM
100MM
100422715
100401743
100422723
100422724
100422728
100422733
100422739
100422752
100422704
DESCRIPTION CODE
PLUMBING CATALOGUETELEPHONE 1300 65 40 40 33
HOT & COLD WATER SYSTEMS AND GAS SYSTEMS
CAP
SILVER SOLDER STICKS
15MM
20MM
25MM
32MM
40MM
50MM
65MM
80MM
100MM
15% SILVER - 2.4MM X 750MM
5% SILVER - 3MM X 750MM
2% SILVER - 3MM X 750MM
100401557
100401559
100401561
100401562
100401563
100401564
100401565
100401566
100401554
100420240
100420245
100420243
DESCRIPTION CODE
DESCRIPTION CODE
REDUCER M+F
JOINER F+F
COPPER PIPE AND FITTINGS
20MM X 15MM
25MM X 20MM
32MM X 20MM
32MM X 25MM
40MM X 20MM
40MM X 25MM
40MM X 32MM
50MM X 20MM
50MM X 25MM
50MM X 32MM
50MM X 40MM
65MM X 40MM
65MM X 50MM
80MM X 40MM
80MM X 50MM
80MM X 65MM
100MM X 50MM
100MM X 65MM
100MM X 80MM
15MM
20MM
25MM
32MM
40MM
50MM
65MM
80MM
100MM
100417746
100417749
100417751
100401704
100417753
100417754
100417755
100417756
100417757
100417758
100417759
100417761
100417762
100417763
100417764
100417765
100417735
100417736
100417737
100410905
100410907
100410909
100410910
100410911
100410912
100410913
100410914
100410902
DESCRIPTION CODE
DESCRIPTION CODE
PLUMBING CATALOGUE TOTALEDEN.COM.AU34
HOT & COLD WATER SYSTEMS AND GAS SYSTEMS
Please refer to pages 148 and 149 for the Tool Compatibility Chart
COUPLING CRIMP - WATER & GAS
DESCRIPTION - WATER CODE DESCRIPTION - GAS CODE
15MM 100481056 DN15 100498688
20MM 100481057 DN20 100498689
25MM 100481058 DN25 100498690
32MM 100481059 DN32 100498691
40MM 100481060 DN40 100498692
50MM 100481171 DN50 100498693
65MM 100481172
80MM 100481173
100MM 100481174
SLIP COUPLING CRIMP - WATER & GAS
DESCRIPTION - WATER CODE DESCRIPTION - GAS CODE
15MM 100481175 DN15 100498694
20MM 100481176 DN20 100498695
25MM 100481177 DN25 100498696
32MM 100481178 DN32 100498697
40MM 100481179 DN40 100498698
50MM 100481180 DN50 100498699
65MM 100481181
80MM 100481182
100MM 100481183
SPIGOT REDUCER - WATER & GAS
DESCRIPTION - WATER CODE DESCRIPTION - GAS CODE
20 X 15MM 100481258 DN20 X DN15 100498700
25 X 15MM 100481259 DN25 X DN15 100498701
25 X 20MM 100481260 DN25 X DN20 100498702
32 X 20MM 100481261 DN32 X DN20 100498703
32 X 25MM 100481262 DN32 X DN25 100498704
40 X 25MM 100481263 DN40 X DN25 100498705
40 X 32MM 100481264 DN40 X DN32 100498706
50 X 32MM 100481265 DN50 X DN32 100498707
50 X 40MM 100481266 DN50 X DN40 100498708
65 X 50MM 100481267
80 X 50MM 100481268
80 X 65MM 100481269
100 X 50MM 100481270
100 X 65MM 100481271
100 X 80MM 100481272
COPPER PRESS-FIT FITTINGSCOPPER
PLUMBING CATALOGUETELEPHONE 1300 65 40 40 35
HOT & COLD WATER SYSTEMS AND GAS SYSTEMSHOT & COLD WATER SYSTEMS AND GAS SYSTEMS
Please refer to pages 148 and 149 for the Tool Compatibility Chart
END CAP COPPER CRIMP - WATER & GAS
DESCRIPTION - WATER CODE DESCRIPTION - GAS CODE
15MM 100481227 DN15 100498709
20MM 100481228 DN20 100498710
25MM 100481229 DN25 100498711
32MM 100481230 DN32 100498712
40MM 100481231 DN40 100498713
50MM 100481232 DN50 100498714
65MM 100481233
80MM 100481234
100MM 100481235
45 DEGREE ELBOW BEND F/F - WATER & GAS
DESCRIPTION - WATER CODE DESCRIPTION - GAS CODE
20MM 100481219 DN20 100498727
25MM 100481220 DN25 100498728
32MM 100481221 DN32 100498729
40MM 100481222 DN40 100498730
50MM 100481223 DN50 100498731
65MM 100481224
80MM 100481225
100MM 100481226
SOCKET REDUCER - WATER & GAS
DESCRIPTION - WATER CODE DESCRIPTION - GAS CODE
20 X 15MM 100481236 DN20 X DN15 100498715
25 X 15MM 100481237 DN25 X DN15 100498716
25 X 20MM 100481238 DN25 X DN20 100498717
32 X 20MM 100481239 DN32 X DN20 100498718
32 X 25MM 100481240 DN32 X DN25 100498719
40 X 20MM 100481241 DN40 X DN20 100498720
40 X 25MM 100481242 DN40 X DN25 100498721
40 X 32MM 100481243 DN40 X DN32 100498722
50 X 20MM 100481244 DN50 X DN20 100498723
50 X 25MM 100481245 DN50 X DN25 100498724
50 X 32MM 100481246 DN50 X DN32 100498725
50 X 40MM 100481247 DN50 X DN40 100498726
65 X 25MM 100481248
65 X 32MM 100481249
65 X 40MM 100481250
65 X 50MM 100481251
80 X 40MM 100481252
80 X 50MM 100481253
80 X 65MM 100481254
100 X 50MM 100481255
100 X 65MM 100481256
100 X 80MM 100481257
COPPER PRESS-FIT FITTINGSCOPPER
PLUMBING CATALOGUE TOTALEDEN.COM.AU36
HOT & COLD WATER SYSTEMS AND GAS SYSTEMS
Please refer to pages 148 and 149 for the Tool Compatibility Chart
F1 90 DEGREE BEND WALL FIX - WATER & GAS
DESCRIPTION - WATER CODE DESCRIPTION - GAS CODE
15 X 15MM FI BSP 100481275 DN15 X BSP 1/2IN 100498751
20 X 20MM FI BSP 100481276 DN20 X BSP 3/4IN 100498752
90 DEGREE ELBOW BEND F/F - WATER & GAS
DESCRIPTION - WATER CODE DESCRIPTION - GAS CODE
15MM 100481204 DN15 100498732
20MM 100481205 DN20 100498733
25MM 100481206 DN25 100498734
32MM 100481207 DN32 100498735
40MM 100481208 DN40 100498736
50MM 100481209 DN50 100498737
65MM 100481210
80MM 100481211
100MM 100481212
90 DEGREE BEND M/F - WATER & GAS
DESCRIPTION - WATER CODE DESCRIPTION - GAS CODE
15MM 100481213 DN15 100498738
20MM 100481214 DN20 100498739
25MM 100481215 DN25 100498740
32MM 100481216 DN32 100498741
40MM 100481217 DN40 100498742
50MM 100481218 DN50 100498743
COPPER PRESS-FIT FITTINGSCOPPER
F1 ADAPTOR - WATER & GAS
DESCRIPTION - WATER CODE DESCRIPTION - GAS CODE
15 X 15MM FI BSP 100481290 DN15 X BSP 1/2IN 100498777
20 X 20MM FI BSP 100481291 DN20 S BSP 3/4IN 100498778
PLUMBING CATALOGUETELEPHONE 1300 65 40 40 37
HOT & COLD WATER SYSTEMS AND GAS SYSTEMSHOT & COLD WATER SYSTEMS AND GAS SYSTEMS
Please refer to pages 148 and 149 for the Tool Compatibility Chart
TEE REDUCED - WATER & GAS
DESCRIPTION - WATER CODE DESCRIPTION - GAS CODE
20 X 15 X 15MM 100481194 DN20 X 15BR X DN15 100498762
20 X 15 X 20MM 100481193 DN20 X 15BR X DN20 100498763
20 X 20 X 15MM 100481195 DN20 X 20BR X DN15 100498764
25 X 15 X 25MM 100481196 DN25 X 15BR X DN25 100498765
25 X 20 X 25MM 100481197 DN25 X 20BR X DN25 100498766
32 X 25 X 32MM 100481198 DN32 X 25BR X DN32 100498767
40 X 32 X 40MM 100481199 DN40 X 32BR X DN40 100498768
50 X 40 X 50MM 100481200 DN50 X 40BR X DN50 100498769
65 X 50 X 65MM 100481201
80 X 65 X 80MM 100481202
100 X 80 X 100MM 100481203
ADAPTOR PEX PRESSED - WATER & GAS
DESCRIPTION - WATER CODE DESCRIPTION - GAS CODE
15 X 15MM 100481286 DN15 X PEX DN16 100498774
20 X 20MM 100481287 DN20 X PEX DN20 100498775
DN25 X PEX DN25 100498776
COPPER PRESS-FIT FITTINGSCOPPER
TEE EQUAL - WATER & GAS
DESCRIPTION - WATER CODE DESCRIPTION - GAS CODE
15MM 100481184 DN15 100498756
20MM 100481185 DN20 100498757
25MM 100481186 DN25 100498758
32MM 100481187 DN32 100498759
40MM 100481188 DN40 100498760
50MM 100481189 DN50 100498761
65MM 100481190
80MM 100481191
100MM 100481192
M1 90 DEGREE BEND - WATER & GAS
DESCRIPTION - WATER CODE DESCRIPTION - GAS CODE
20 X 20MM MI BSP 100481274 DN20 X BSP 3/4IN 100498749
*BR = Branch
PLUMBING CATALOGUE TOTALEDEN.COM.AU38
HOT & COLD WATER SYSTEMS AND GAS SYSTEMS
Please refer to pages 148 and 149 for the Tool Compatibility Chart
M1 90 DEGREE BEND WALL FIX – WATER & GAS – 85MM THREAD
DESCRIPTION - WATER CODE DESCRIPTION - GAS CODE
15 X 15MM MI BSP 100481277 DN15 X BSP 1/2IN 100498753
COPPER PRESS-FIT FITTINGSM1 UNION - WATER & GAS
DESCRIPTION - WATER CODE DESCRIPTION - GAS CODE
15 X 15MM MI BSP 100481278 DN15 X BSP 1/2IN 100498790
20 X 20MM MI BSP 100481279 DN20 X BSP 3/4IN 100498791
25 X 25MM MI BSP 100481280 DN25 X BSP 1IN 100498792
32 X 32MM MI BSP 100481281 DN32 X BSP 1 1/4IN 100498793
40 X 40MM MI BSP 100481282 DN40 X BSP 1 1/2IN 100498794
50 X 50MM MI BSP 100481283 DN50 X BSP 2IN 100498795
COPPER
FLARED UNION - WATER
DESCRIPTION - WATER CODE
15 X 15MM FI BSP 100481284
20 X 20MM FI BSP 100481285
F1 90 DEGREE BEND - WATER
DESCRIPTION - WATER CODE
20 X 20MM FI BSP 100481273
ADAPTOR PEX AXIAL - WATER
DESCRIPTION - WATER CODE
15 X 15MM 100481288
20 X 20MM 100481289
PLUMBING CATALOGUETELEPHONE 1300 65 40 40 39
HOT & COLD WATER SYSTEMS AND GAS SYSTEMS
Please refer to pages 148 and 149 for the Tool Compatibility Chart
COPPER PRESS-FIT FITTINGSCOPPERM1 ADAPTOR -WATER & GAS
DESCRIPTION - WATER CODE DESCRIPTION - GAS CODE
15 X 15MM MI BSP 100481292 DN15 X BSP 1/2IN 100498782
20 X 15MM MI BSP 100481293 DN20 X BSP 1/2IN 100498783
20 X 20MM MI BSP 100481294 DN20 X BSP 3/4IN 100498784
25 X 25MM MI BSP 100481295 DN25 X BSP 3/4IN 100498785
32 X 32MM MI BSP 100481296 DN25 X BSP 1IN 100498786
40 X 40MM MI BSP 100481297 DN32 X BSP 1 1/4IN 100498787
50 X 50MM MI BSP 100481298 DN40 X BSP 1 1/2IN 100498788
DN50 X BSP 2IN 100498789
PLUMBING CATALOGUE TOTALEDEN.COM.AU40
HOT & COLD WATER SYSTEMS AND GAS SYSTEMSHOT & COLD WATER SYSTEMS AND GAS SYSTEMS
COMMERCIAL HOT WATER UNITS
Are you looking for a continuous flow hot water system for your next commercialproject?We have dealer access to Australia's leading manufacturers' and we offer competitive pricing and dependable customer service.
• Heavy duty continuous flow units.
• Minimum 5 star energy rating - meaning reduced gas consumption.
• Manifold packs that allow for multiple units to be plumbed together.
• Indoor and outdoor models available.
Commercial continuous flow water heaters provide a consistent outlet temperature atall times, giving users peace of mind that hot water is available when they need it.
For the range of models available or to discuss your commercial hot water systemrequirements contact Total Eden today - no job is too big or too small.
• Pits, Drains, Rainwater Outlets, Grates and Cleanouts
Valsir Rainplus is a syphonic rainwater drainage system designed to guaranteemaximum drainage performance with the lowest levels of water accumulation onthe roof of medium to large size buildings. Using the building height as the drivingforce combined with the negative pressure generated inside the pipes, Rainplusmaximises water drainage speed and therefore drainage efficiency.
PVC stormwater pipes and fittings are available in sizes ranging from 75mm to375mm diameter. Total Eden stocks a full range of pipes and fittings including 200mmOD pipe that provides the installer with another option when 160mm diameter pipedoes not meet the hydraulic flow requirements of the project. Butt-head is Total Eden'sown quality brand of moulded and fabricated PVC stormwater fittings.
StormPRO and BlackMAX are twin walled corrugated polypropylene pipe andfittings for large bore stormwater applications. Both products are a cost effectivenon corroding alternative to traditional metal and concrete rigid pipe materials.These pipes have a wall profile structure which provides high ring stiffness (SN8)ensuring these products can readily withstand both installation and service loads.
Premium Commercial Pits, Drains, Grates and Cleanouts by leading manufacturersalso make up part of Total Eden’s stormwater and drainage product range.The range includes floor drains, wastes, cleanouts and rainwater outlets all of whichare ideal for commercial and municipal environments.
PLUMBING CATALOGUE TOTALEDEN.COM.AU42
STORMWATER SYSTEMS
TOTALEDEN.COM.AUPLUMBING CATALOGUE
STORMWATER SYSTEMS
VALSIR® RAINPLUS® Siphonic roof drainage systemValsir Rainplus features the most up to date technology in rainwater drainage for roofs of medium to large buildings. The system uses the building height as the driving force to generate high speed flow rates thus maximising drainage efficiency. Rainplus allows the entire flow of water to be directed to any part of the building, enabling the most modern rainwater harvesting systems to be installed.
Rainplus advantages:• Economical - compared to conventional downpipe systems, Rainplus allows for a
reduction in pipe diameter and the number of downpipes needed, reducing installation costs by up to 30%.
• Space saving - no fall needed on collector pipes.• High performance - increased velocity and drainage over conventional systems.• Time and labour saving - less pipes means shorter install times.• Increased design flexibility - complete control over downpipe location.
The Rainplus siphonic system is made up of special roof outlets that are designed and tested according to ASME A112.6.9 and EN1253. These outlets are connected to Valsir HDPE pipe and fittings which are sized in order to work under negative pressures, at high flow rates and with a full bore. This is possible thanks to the special configuration of the Rainplus roof outlets which prevent air from entering the pipe when the design rainfall intensity value is reached.
For further information or to request a brochure please contact your Total Eden representative.
PLUMBING CATALOGUETELEPHONE 1300 65 40 40 43
STORMWATER SYSTEMSSTORMWATER SYSTEMS
SIPHONIC OUTLET - COMPLETE SCREWS
PLATES
SEALS
OVERFLOW KITS
RAINPLUS OUTLETS - STRAIGHT SPIGOT
RAINPLUS OUTLETS - 90O CURVED SPIGOT
ANTI-LEAF GRATING
ADAPTOR
VALSIR RAINPLUS SIPHONIC SYSTEM
40MM - 110MM
1 - 65LT PER SECOND
40MM - 110MM
SUIT RAIN PLUS OUTLETS
320MM X 320MM - FOR
INSTALLATION IN GUTTERS
520MM X 520MM - GAL - FOR
WATERPROOF COVERINGS
FOR METAL PLATES
FOR 56MM OUTLET
FOR 110MM OUTLET
56MM - 180MM - ROUND
S/S FLANGE
56MM - 420MM - SQUARE
S/S FLANGE
56MM - 180MM - ROUND
S/S FLANGE
56MM - 420MM - SQUARE
S/S FLANGE
40MM - 110MM - SUITS 110MM
RAIN PLUS OUTLET
40MM - 110MM - SUITS 110MM
RAINPLUS OUTLET
100413814
100418890
100411938
100411939
100420104
100413384
100413383
100407475
100407477
100407474
100407478
100398349
100397743
DESCRIPTION DESCRIPTION
DESCRIPTION
DESCRIPTION
DESCRIPTION
DESCRIPTION
DESCRIPTION
DESCRIPTION
DESCRIPTION
CODE CODE
CODE
CODE
CODE
CODE
CODE
CODE
CODE For a full range of pipe and fittings to suit Rainplus outlets see Valsir HDPE section - pages 13.
Refer to manufacturers’ website for technical specifications and infromation. www.valsir.it
Other fittings are available on request. Contact your TOTAL EDEN sales representative for further information.
PLUMBING CATALOGUETELEPHONE 1300 65 40 40 49
STORMWATER SYSTEMS
SLOTTED CORRUGATED DRAIN PIPE - CLS400
SLOTTED CORRUGATED DRAIN PIPE - CLS200
SLOTTED CORRUGATED DRAIN PIPE - CLS1000
UNSLOTTED CORRUGATED DRAIN PIPE - CLS400
45O Y JUNCTION
ADAPTOR
90O T JUNCTION
CROSSNYLON FILTER SOCKS
COUPLINGS
CAP
50MM X 10M
50MM X 20M
50MM X 20M + NYLON SOCK
50MM X 200M
65MM X 10M
65MM X 20M
65MM X 20M + NYLON SOCK
65MM X 200M
65MM X 200M + NYLON SOCK
100MM X 10M
100MM X 20M
100MM X 20M + NYLON SOCK
100MM X 100M
100MM X 100M + NYLON SOCK
160MM X 20M
160MM X 60M
160MM X 60M - WITH NYLON
SOCK
100MM X 100M
100MM X 100M - WITH NYLON
SOCK
50MM X 20M
50MM X 200M
65MM X 20M
100MM X 20M
100MM X 100M
100MM
100MM X 90MM - F+M
100MM
100MM100MM X 20M
160MM X 60M - RTA
100MM - TO SUIT CLS400
100MM - TO SUIT CLS1000
100MM
4523250
100405227
100405235
100405226
4524795
100405229
100405236
100405228
3274015
4613585
100405223
100405232
100405224
100405233
4804540
2530020
9223913
100405230
100405237
100405240
4554745
100405241
100405239
4554770
100427015
100398150
100422569
4607400 4613195
4804560
100403538
100403539
100406675
DESCRIPTION
DESCRIPTION
DESCRIPTION
DESCRIPTION
DESCRIPTION
DESCRIPTION
DESCRIPTION
DESCRIPTIONDESCRIPTION
DESCRIPTION
DESCRIPTION
CODE
CODE
CODE
CODE
CODE
CODE
CODE
CODE CODE
CODE
CODE
DRAIN PIPE AND FITTINGS
PLUMBING CATALOGUE TOTALEDEN.COM.AU50
STORMWATER SYSTEMS
PITS AND DRAINSEVERDRAIN PITS - POLY
EVERDRAIN PIT EXTENSIONS - POLY
PRECAST CONCRETE ELECTRICAL PIT
ALL STORM PITS AND GRATES
POLYCRETE PIT - P90
GRATE AND FRAMES
EVERDRAIN GRATES TO SUIT PITS
200MM X 200MM - WITH
ALUMINIUM GRATE
200MM X 200MM
300MM X 300MM
450MM X 450MM
600MM X 600MM
300MM X 300MM X 450MM
450MM X 450MM
600MM X 600MM
900MM X 900MM
X 900MM DEEP
225MM
300MM
900MM X 900MM
X 600MM DEEP
450MM X 450MM - LIGHT DUTY
450MM X 450MM - HEAVY DUTY
600MM X 600MM - LIGHT DUTY
600MM X 600MM - HEAVY DUTY
600MM X 600MM - EXTRA HEAVY
600MM X 900MM - LIGHT DUTY
600MM X 900MM - HEAVY DUTY
600MM X 900MM - EXTRA HEAVY
200MM - POLY
200MM X 200MM - ALUMINIUM
300MM - ALUMINIUM
300MM - GALVANISED
450MM - GALVANISED
600MM - GALVANISED
4805070
100415349
100415350
100415351
100415352
4805080
100415341
100415342
256 0200
100415356
100415357
256 0210
256 0080
256 0090
256 0100
256 0110
256 0120
256 0130
256 0140
256 0150
100409066
9062015
100409083
4805055
100409063
100409062
DESCRIPTION
DESCRIPTION
DESCRIPTION
DESCRIPTION
DESCRIPTION
DESCRIPTION
DESCRIPTION
CODE
CODE
CODE
CODE
CODE
CODE
CODE
CONCEALED INFILL COVERS
DUCTILE COVERS
CONCRETE FLUSH OUT RISER
SUBSOIL BATTER OUTLETS
SUBSOIL DRAINAGE PIT & COVER - CONCRETE S1
900MM X 900MM - LIGHT DUTY
- CLASS B
900MM X 900MM - HEAVY DUTY
- CLASS D
900MM X 900MM - ELECTRICAL
- CLASS B
900MM X 900MM - COMMS -
CLASS B
CONCRETE FLUSH OUT
RISER
100MM
SINGLE - VIC ROADS
APPROVED
DOUBLE - VIC ROADS
APPROVED
600MM - PIT - S1 TYPE
COVER - S1 TYPE
PIT & COVER - S1 TYPE
2560160
2560170
2560180
2560190
100418158
2560240
2560000
2560010
3322456
3322458
100415355
DESCRIPTION
DESCRIPTION
DESCRIPTION
DESCRIPTION
DESCRIPTION
CODE
CODE
CODE
CODE
CODE
Other sizes are available on request.
Other sizes are available on request.
Other sizes are available on request.
STORMWATER SYSTEMS
PLUMBING CATALOGUETELEPHONE 1300 65 40 40 51
STORMWATER SYSTEMSSTORMWATER SYSTEMS
TOTALEDEN.COM.AUPLUMBING CATALOGUE
DRAINAGE AND RAINWATER OUTLETS Premium commercial drains, grates and cleanouts.
with the lowest levels of water accumulation on Galvin Engineering floor drains, wastes, cleanouts and rainwater outlets are ideal for commercial and municipal environments. Manufactured from heavy duty materials including grade 316 stainless steel, they are hard-wearing, reliable and have been designed with end-user flexibility in mind.
The new Slip-Safe® and Safe-Cell® ranges are designed to maximise safety in areas such as commercial bathrooms, public swimming pools and correctional centres where there is a higher risk of injury.
Galvin Engineering products have a strong reputation for quality and reliability and have been used in some of Australia’s most recognised buildings and organisations including the Sydney Opera House, Hungry Jacks Restaurants and Coles Supermarkets.
Manufactured to exacting AS1589 standards, Galvin Engineering products are approved for floor drain grates and bolted cleanouts. Total Eden stock a comprehensive range of commercial drainage, rainwater outlets and associated products. We are also leaders in providing product solutions across a range of plumbing and drainage applications.
For further information on Total Edens commercial grade drainage products please contact your representative.
PVC Connector 50FI BSP X 50PVCPVC Connector 80FI BSP X 80PVCPVC Connector 100FI BSP X 100PVC PVC Connector 150FI BSP X 150PVC
PVC Connector 50 MI BSP X 50PVCPVC Connector 80 MI BSP X 80PVCPVC Connector 100 MI BSP X 100PVCPVC Connector 150 MI BSP X 150PVC
100405177 100405178 100405175 100405176
100403369 100403370 100403368 100397915
DESCRIPTIONDESCRIPTION CODE CODE
PLUMBING CATALOGUE TOTALEDEN.COM.AU60
STORMWATER SYSTEMS
MULTI-PURPOSE VERTICAL RAIN WATER OUTLETS
All dimensional measurements are in millimetres
All dimensional measurements are in millimetres
FLAT VERTICAL ROOF OUTLET - WITHOUT MEMBRANE DOMED VERTICAL ROOF OUTLET - WITH MEMBRANEAND CLAMP RING
FLAT VERTICAL ROOF OUTLET - WITH MEMBRANE AND CLAMP RING
CLAMP RING STYLE - FLAT OR DOMED GRATE PUDDLE FLANGE STYLE - FLAT OR DOMED GRATE
CODE GRATEMATERIAL
BODYMATERIAL A B C D CONNECT.
TYPE285007 DI DI 245 100 260 100 PVC/HDPE
285021 DI DI 245 150 270 98 PVC/HDPE
CODE GRATEMATERIAL
BODYMATERIAL A B C D CONNECTION
TYPEFLAT GRATE
282608 AL CI 50 250 105 Thread
282616 AL CI 80 250 135 Thread
DOMED GRATE
282483 AL CI 50 250 105 65 Thread
282491 AL CI 80 250 135 65 Thread
CODE GRATEMATERIAL
BODYMATERIAL A B C D E F CONNECT.
TYPE285205 DI DI 223 100 260 100 240 75 PVC/HDPE
285219 DI DI 223 150 270 98 240 75 PVC/HDPE
CODE GRATEMATERIAL
BODYMATERIAL A B C D E F CONNECT.
TYPEFLAT GRATE
282889 AL CI 50 250 105 58 215 Thread
282897 AL CI 80 250 135 58 215 Thread
DOMED GRATE
282764 AL CI 50 250 105 65 58 215 Thread
282772 AL CI 80 250 135 65 58 215 Thread
CODE GRATEMATERIAL
BODYMATERIAL A B C D E CONNECT.
TYPE285101 DI DI 224 100 260 100 240 PVC/HDPE
285115 DI DI 224 150 270 98 240 PVC/HDPE
90o RAIN WATER OUTLET COMBINATIONS
PLUMBING CATALOGUETELEPHONE 1300 65 40 40 61
STORMWATER SYSTEMS
STANDARD VERTICAL RAIN WATER OUTLETS
All dimensional measurements are in millimetresAll dimensional measurements are in millimetres
All dimensional measurements are in millimetres
CLAMP RING STYLE - FLAT OR DOMED GRATE
INTEGRAL MEMBRANE STYLE - FLAT OR DOMED GRATE
PUDDLE FLANGE STYLE - FLAT OR DOMED GRATE
CODE SIZE GRATEMATERIAL
BODYMATERIAL
A(NOM) B C D CONNECTION
TYPEFLAT GRATE
279976 50 AL CI 50 245 95 PVC/HDPE
280107 80 AL CI 80 245 90 PVC
DOMED GRATE
279950 50 AL CI 50 245 95 65 PVC/HDPE
280081 80 AL CI 80 245 90 65 PVC
CODE SIZE GRATEMATERIAL
BODYMATERIAL
A(NOM) B C D E F CONNECTION
TYPEFLAT GRATE
280016 50 AL CI 50 245 95 55 215 PVC/HDPE
280149 80 AL CI 80 245 90 55 215 PVC
DOMED GRATE
279992 50 AL CI 50 245 95 65 55 215 PVC/HDPE
280123 80 AL CI 80 245 90 65 55 215 PVC
CODE SIZE GRATEMATERIAL
BODYMATERIAL
A(NOM) B C D E F CONNECTION
TYPEFLAT GRATE
280057 50 AL CI 50 245 95 68 215 PVC/HDPE
280180 80 AL CI 80 245 90 68 215 PVC
DOMED GRATE
280032 50 AL CI 50 245 95 65 68 215 PVC/HDPE
280164 80 AL CI 80 245 90 65 68 215 PVC
PLUMBING CATALOGUE TOTALEDEN.COM.AU62
STORMWATER SYSTEMS
SIDE VIEW TOPVIEW
CODE GRATEMATERIAL
BODYMATERIAL A B C D E
(NOM) F CONNECTION TYPE
100405212 304 St St CI 50 150 69 104 58.5 10 Thread
100405210 304 St St CI 80 205 120 145 120 10 Thread
100405211 304 St St CI 100 280 162 190 120 10 Thread
283031 304 St St CI 150 277 162 190 112 10 Thread
PARAPET STYLE RAIN WATER OUTLET
SAFE-CELL PRISON FLOOR WASTES
All dimensional measurements are in millimetres
CODE GRATE STYLE MATERIAL TOP(A)
OUTLET(B)
DEPTH(C)
HEIGHT(D)
CONNECTION TYPE
303077 CRR - VINYL NI BZ 100 80 40 63 THREAD
303070X CRR - STANDARD 55304 100 80 40 40 THREAD
303077X CRR - VINYL 55304 100 80 40 61 THREAD
303079X CRR - VINYL 55304 150 100 40 73 THREAD
All dimensional measurements are in millimetres
CRR - VINYL STYLE GRATE CRR - STANDARD STYLE GRATE
PLUMBING CATALOGUETELEPHONE 1300 65 40 40 63
STORMWATER SYSTEMS
STAINLESS STEEL DRAINAGE (ALDI SPEC)
TUNDISH COVER (ALDI SPEC)
CLEANOUT (ALDI SPEC)
FLOOR WASTE (ALDI SPEC)
CLEANER SINK (ALDI SPEC)
FLOOR SUMP (ALDI SPEC)
150MM - STAINLESS STEEL
150MM - STAINLESS STEEL
150MM - STAINLESS STEEL
600MM X 600MM- S/S
300MM STAINLESS STEEL
100402235
100402238
100402236
100419377
100402237
DESCRIPTION
DESCRIPTION
DESCRIPTION
DESCRIPTION
DESCRIPTION
CODE
CODE
CODE
CODE
CODE
PLUMBING CATALOGUE TOTALEDEN.COM.AU64
PVC PRESSURE PIPE AND FITTINGS
PVC PRESSURE PIPE AND FITTINGS
PVC Pressure Pipe SWJ: 15mm - 300mm
PVC Pressure Pipe RRJ: 50mm - 375mm
PVC Moulded Pressure Fittings: 15mm - 375mm
Clips and Saddles
Pressure Solvent Cements & Primers
Total Eden supply PVC S1 Solvent Weld Joint (SWJ) pressure pipe and fittings from 15mm to 375mm and are available in PN ratings 6, 9, 12 and 18. PVC SWJ pressure pipe is light weight with excellent hydraulic flow.
PVC S1 Rubber Ring Joint (RRJ) pipes are available from 50mm to 375mm with PN ratings of 6, 9 and 12. PVC RRJ pressure pipe is suitable for industrial process pipelines, potable water, pool and spa, air conditioning and waste water treatment plants.
Total Eden's own range of BUTT-HEAD pressure fittings are a cost-effective alternative without sacrificing quality. Butt-head fittings offer a full range of bushes, couplings, elbows, sockets, tees and unions from 15mm to 150mm enabling complete installation for most applications. All Butt-head pressure fittings 100mm and smaller are rated to PN18 while 150mm fittings are rated PN12.
TOTALEDEN.COM.AUPLUMBING CATALOGUE
PLUMBING CATALOGUETELEPHONE 1300 65 40 40 65
PVC PRESSURE PIPE AND FITTINGS
Slotted and Threaded PVC Pressure Pipe are available on request.
PVC PRESSURE PIPEPN6 uPVC PIPE - 6M LENGTHS - SWJ
PN9 uPVC PIPE - 6M LENGTHS - SWJ
PN12 uPVC PIPE - 6M LENGTHS - SWJ
PN18 uPVC PIPE - 6M LENGTHS - SWJ
PN6 PVC PIPE - 6M LENGTHS - RRJ
PN9 PVC PIPE - 6M LENGTHS - RRJ
PN12 PVC PIPE - 6M LENGTHS - RRJ
40MM
50MM
80MM
100MM
150MM
200MM
25MM
32MM
40MM
50MM
80MM
100MM
125MM
150MM
200MM
20MM
25MM
32MM
40MM
50MM
65MM
80MM
100MM
125MM
150MM
155MM
200MM
225MM
250MM
300MM
15MM
20MM
25MM
32MM
40MM
50MM
65MM
80MM
100MM
125MM
150MM
200MM
80MM
100MM
150MM
200MM
250MM
300MM
375MM
80MM
100MM
150MM
200MM
250MM
300MM
50MM
80MM
100MM
150MM
200MM
225MM
250MM
300MM
100415077
100415078
100415079
100415075
100415076
100414865
100415087
100415088
100415089
100415090
100415091
100415081
100415082
100415083
100415085
100415054
100414856
100414857
100414858
100415058
100414860
100415059
100415048
100415049
100415050
100414057
100415052
100415055
100415056
100415057
100415060
100415061
100415062
100415063
100415064
100415065
100415066
100415067
100414863
100415092
100414864
100415093
100415074
100415068
100415069
100415070
100415072
100415073
4554805
100415080
100414650
100414866
100414867
100414651
100414652
100414089
100414855
100414851
100414646
100414647
100458193
100414648
100414854
DESCRIPTION
DESCRIPTION
DESCRIPTION
DESCRIPTION
DESCRIPTION
DESCRIPTION
DESCRIPTION
CODE
CODE
CODE
CODE
CODE
CODE
CODE
PVC PRESSURE PIPE AND FITTINGS
PLUMBING CATALOGUE TOTALEDEN.COM.AU66
PVC PRESSURE PIPE AND FITTINGS
PVC PRESSURE FITTINGSCAT 2 MI ADAPTORS - PN18
CAT 3 FI ADAPTORS
CAT 5 REDUCING BUSHES
CAT 6 CAPS
15MM X 1/2” 20MM X 1/2” 20MM X 3/4” 25MM X 3/4” 25MM X 1” 32MM X 1 1/4” 40MM X 3/4” 40MM X 1” 40MM X 1 1/2” 50MM X 1 1/2” 50MM X 2” 80MM X 3” - PN15
15MM X 1/4” - NPT - SCH4015MM X 3/8” - NPT - SCH4015MM X 1/2” - PN1820MM X 1/2”- PN1820MM X 3/4” - PN1825MM X 1/2”- NPT - SCH4025MM X 3/4” - NPT - SCH4025MM X 1” - PN1832MM X 1/2” - PN1832MM X 1” - NPT - SCH4032MM X 1 1/4” - PN1840MM X 1/2” - NPT - SCH4040MM X 3/4” - PN1840MM X 1” - PN1840MM X 1 1/4” - PN1840MM X 1 1/2” - PN1850MM X 1/2” - NPT - SCH4050MM X 3/4” - NPT - SCH4050MM X 1” - PN1850MM X 2” - PN1880MM X 3” - PN15100MM X 4” - PN15
15MM X 1/2” - PN1820MM X 1/2” - NPT - SCH4020MM X 3/4” - PN1825MM X 1/2” - PN1825MM X 3/4” - NPT - SCH4025MM X 1” - PN1832MM X 1 1/4” - PN1840MM X 1 1/2” - PN1850MM X 2” - PN1880MM X 3” - PN15100MM X 4” - PN15
15MM X 1/2” - PN1815MM X 3/4” - NPT - SCH4020MM X 1/2” - NPT - SCH4020MM X 3/4” - PN1820MM X 1”- NPT - SCH4025MM X 3/4” - NPT - SCH4025MM X 1” - PN1832MM X 1 1/4” - PN1840MM X 1 1/2” - PN1850MM X 2” - PN1865MM X 2 1/2” - PN1880MM X 3” - PN15100MM X 4” - PN15
20MM X 15MM - PN1825MM X 15MM - PN1825MM X 20MM - PN1832MM X 15MM - PN1832MM X 20MM - PN1832MM X 25MM - PN1840MM X 15MM - PN1840MM X 20MM - PN1840MM X 25MM - PN1840MM X 32MM - PN1850MM X 15MM - PN1850MM X 20MM - PN1850MM X 25MM - PN1850MM X 32MM - PN1850MM X 40MM - PN18
* Denotes gap filling solvent cement must be used.
NOTE: Fittings 155mm and above are grey in colour.
CAT 21 FI TEES - PN18
CAT 22 BARREL UNIONS - SWJ
CAT 23 SCREWED PLUGS - PN18
CAT 24 SCREWED BUSHES
90O SIDE OUTLET ELBOWS - THREADED
BULLHEAD TEE
CAT 19 REDUCING TEES (CONTINUED)
15MM X 1/2” 20MM X 1/2” 20MM X 3/4” 25MM X 1/2” 25MM X 3/4” 25MM X 1” 32MM X 1/2” 32MM X 3/4” 32MM X 1” 40MM X 1/2” 40MM X 3/4” 40MM X 1” 50MM X 1/2” - NPT - SCH4050MM X 3/4” 50MM X 1”
40MM X 3/4”40MM X 1”50MM X 3/4”50MM X 1”80MM X 3/4”80MM X 1”80MM X 1 1/2”80MM X 2” 100MM X 3/4” 100MM X 1” 100MM X 1 1/2” 100MM X 2” 150MM X 3/4” 150MM X 1” 150MM X 1 1/2” 150MM X 2” 155MM X 1” 155MM X 2” 195MM X 2” 200MM X 2”
20MM 25MM 32MM 40MM 50MM 80MM 100MM
80MM - SUITS OD 88.1MM - 102.4MM100MM - SUITS OD 110MM - 127MM150MM - SUITS OD 159MM - 181MM200MM - SUITS OD 218MM - 235MM225MM - SUITS OD 242MM - 262MM250MM - SUITS OD 272MM - 289MM300MM - SUITS OD 315MM - 349MM
WATERMAIN PRESSURE PIPE AND FITTINGSWATERMAIN PRESSURE PIPE AND FITTINGS
PVC BLUE WATERMAIN PRESSURE PIPE - RRJ - 6M
90O BEND - FLANGE X FLANGE
90O BEND - SOCKET X FLANGE
TEES - SOCKET X SOCKET
11.25O BEND - SOCKET X SOCKET
22.5O BEND - SOCKET X SOCKET
45O BEND - SOCKET X SOCKET
90O BEND - SOCKET X SOCKET
PVC PRESSURE PIPE
CAST IRON WATER FITTINGS
100MM - PN16
100MM - PN18
100MM - PN20
150MM - PN16
150MM - PN18
150MM - PN20
200MM - PN12
200MM - PN16
200MM - PN18
200MM - PN20
100MM
150MM
200MM
100MM X 80MM + HYDRANT
100MM + WASHOUT
150MM
100MM
150MM
200MM
250MM
100MM
150MM
200MM
250MM
100MM
150MM
200MM
250MM
100MM
150MM
200MM
250MM
100MM X 100MM
150MM X 100MM
150MM X 150MM
200MM X 100MM
200MM X 150MM
200MM X 200MM
250MM X 100MM
250MM X 150MM
250MM X 200MM
250MM X 250MM
100414070
100414073
100414076
100414071
100414074
100414077
3273450
100414072
100414075
5300010
100399739
100399684
100399642
100407434
100399956
100399955
100399312
100399309
100399300
100399301
100399380
100399376
100399353
100399378
100399450
100399451
100399452
100399438
100399658
100399659
100399647
100399762
100423356
100422496
100423357
100422487
100423329
100423328
100423331
100423332
100423330
100423327
DESCRIPTION
DESCRIPTION
DESCRIPTION
DESCRIPTION
DESCRIPTION
DESCRIPTION
DESCRIPTION
DESCRIPTION
CODE
CODE
CODE
CODE
CODE
CODE
CODE
CODE
75
WATERMAIN PRESSURE PIPE AND FITTINGS
TEES - FLANGE X FLANGE
HYDRANT TEES - SOCKET X FLANGE
CONNECTORS - SOCKET X FLANGE
SPRING HYDRANTS
SWASH HYDRANTS
BLANK FLANGES
READYTAP 4 WAY CONNECTORS
CAPS - SOCKET
TAPERS - SOCKET X SOCKET
HYDRANT RISERS - FLANGE X FLANGETEES - SOCKET X FLANGE
100MM X 100MM
150MM X 100MM
150MM X 150MM
100MM X 80MM
150MM X 80MM
200MM X 80MM
250MM X 80MM
100MM
150MM
200MM
250MM
80MM
100MM
80MM
100MM
80MM
100MM
150MM
100MM X 50MM - TAPPED
80MM X 50MM - TAPPED
100M X 20MM
150M X 20MM
100MM
150MM
200MM
250MM
150MM X 100MM
200MM X 100MM
200MM X 150MM
250MM X 100MM
250MM X 150MM
250MM X 200MM
80MM X 100MM
80MM X 150MM
80MM X 225MM
80MM X 300MM
80MM X 375MM
80MM X 450MM
100MM X 100MM
100MM X 150MM
100MM X 225MM
100MM X 300MM
100MM X 450MM
100MM X 600MM
100MM X 100MM
150MM X 100MM
200MM X 100MM
200MM X 150MM
250MM X 100MM
250MM X 150MM
250MM X 250MM
100422444
100422664
100422663
100422563
100422769
100422770
100422771
100403190
100403191
100403192
100403352
100420630
100420629
100421591
100421590
100407163
100407159
100407160
100407169
100407167
100403329
100403330
100401714
100401492
100401476
100401477
100422261
100417872
100417873
100423679
100417875
100417874
100418243
100418244
100418239
100418238
100418240
100418241
100418236
100418237
100407383
100407382
100418235
100418233
100423334
100423336
100423323
100423324
100423325
100422483
100422470
DESCRIPTION
DESCRIPTION
DESCRIPTION
DESCRIPTION
DESCRIPTION
DESCRIPTION
DESCRIPTION
DESCRIPTION
DESCRIPTION
DESCRIPTIONDESCRIPTION
CODE
CODE
CODE
CODE
CODE
CODE
CODE
CODE
CODE
CODE CODE
CAST IRON WATER FITTINGS
76
WATERMAIN PRESSURE PIPE AND FITTINGS
MULTIFIT GIBAULTS - SS BOLTS
TAPPING SADDLES
109MM - 127MM
159MM - 182MM
100MM X 25MM
100MM X 32MM
100MM X 40MM
100MM X 50MM
150MM X 25MM
150MM X 32MM
150MM X 40MM
150MM X 50MM
100404239
9172415
100422028
100422029
100421985
100422030
100422034
100422035
100422036
100422032
DESCRIPTION
DESCRIPTION
CODE
CODE
CAST IRON WATER FITTINGS
Please Note: 225mm, 300mm and 375mm diameter fittings are also available. Please contact your sales representative for pricing and availability.
R/S SLUICE VALVES - ANTI CLOCKWISE VALVES
100MM - SOCKETED
150MM - SOCKETED
100MM - FLANGED - TABLE D
150MM - FLANGED - TABLE D
100426327
100426328
100426310
100426312
DESCRIPTION CODE
PLUMBING CATALOGUETELEPHONE 1300 65 40 40 77
INDUSTRIAL PIPING SYSTEMSINDUSTRIAL PIPING SYSTEMS
Schedule 80 grey PVC pipe and fittings have high impact strength and moderate heat tolerance making it suitable for a variety of applications including water treatment, manufacturing, food processing and commercial pool construction.
Corzan cPVC industrial piping systems offer superior resistance to corrosive chemicals, high temperatures and harsh application conditions making it the perfect choice for the process industry where highly corrosive chemicals are routinely used.
Corzan systems consistently achieve a higher level of performance than other metallic and non-metallic materials by providing a longer service life, lower maintenance costs and improved process utilisation.
Total Eden also offer offer a range of double containment systems for use where safety and environmental issues are a concern. The Ipex® Guardian™ system and Ipex® Clear Guard™ fail safe system are pre-tested and considered unmatched in the industry.
Where visual monitoring of fluid flow is required, clear rigid PVC pressure pipe provides a versatile option because it is non-contaminating, resists corrosion as well as bacterial and biological activity.
Total Eden is also a supplier of refrigeration pipe, industrial hose, camlocks and polypropylene fittings.
Note: See flange tables on page 140 for technical specifications.
WELD-ON PRIMING FLUID FOR CPVC & PVC
473ML - P70
976ML - P70
100416984
100416985
DESCRIPTION CODE
WELD-ON CEMENT FOR PVC - SCH80
473ML - 711 GREY
976ML - 711 GREY
100420269
100420270
DESCRIPTION CODE
VAN STONE FLANGES - PVC - ANSI 150
BLIND FLANGES - PVC - ANSI
1/2”
3/4”
1”
1 1/4
1 1/2”
2”
2 1/2”
3”
4”
5”
6”
8”
8” SPIGOT
10”
12”
1/2”
3/4”
1”
1 1/4”
1 1/2”
2”
2 1/2”
3”
4”
6”
8”
100407555
100407560
100407558
100407557
100407556
100407559
100407544
100407545
100407546
100407547
100407548
100407539
100407554
100407542
100407543
100407198
100407204
100407201
100407200
100407199
100407203
100407202
100407205
100407206
100407183
100407184
DESCRIPTION
DESCRIPTION
CODE
CODE
PLUMBING CATALOGUE TOTALEDEN.COM.AU82
INDUSTRIAL PIPING SYSTEMSINDUSTRIAL PIPING SYSTEMS
CORZAN® CPVC INDUSTRIAL PIPING SYSTEMSCorzan cPVC industrial systems offer superior resistance to corrosive chemicals, high temperatures and abbrasive application conditions – a necessity in industries where harsh, highly corrosive chemicals are routinely used.
It's Corzan cPVC's perfect balance of qualities including excellent hydraulic capability, good abrasion resistance and lower thermal conductivity along with its chemical resistance that produce longer service life, lower maintenance costs and reduced downtime.
Ideal applications include:• Metal finishing• Pulp and paper• Water and waste treatment • Chemical processing • Semi-conductors • Chlorine / alkali industries
Corzan industrial systems have set new standards for performance in both pipe and fittings meeting a new cell classification (24448) as defined by ASTM D1784 standards. Proving it to have the highest impact resistance and heat distortion temperature (HDT) of any cPVC compound available. What's more, recent performance testing of Corzan cPVC fittings demonstrated a greater resistance to creep at elevated temperatures when compared to those manufactured from generic cPVC compounds.
No industrial system, metallic or non-metallic, performs better than one made from Corzan cPVC pipe and fittings. That's why Corzan cPVC is the system of choice for today's most discerning process engineers. To find out more please contact your Total Eden representative.
PLUMBING CATALOGUETELEPHONE 1300 65 40 40 83
INDUSTRIAL PIPING SYSTEMSINDUSTRIAL PIPING SYSTEMS
3/4” X 1/2”1” X 3/4”1” X 1/2”1 1/4” X 1/2”1 1/4” X 3/4”1 1/4” X 1”1 1/2” X 1/2” 1/2”1 1/2” X 3/41 1/2” X 1”1 1/2” X 1 1/4”2” X 1/2”2” X 3/4”2” X 1”2” X 1 1/4”2” X 1 1/2”2 1/2” X 1”2 1/2” X 1 1/2”2 1/2” X 2”3” 1 1/2”3” X 2”3” X 2 1/2”4” X 2”4” X 3”6” X 4”8” X 6”10” X 6”10” X 8”12” X 8”12” X 10”
CORZAN CPVC PIPE AND FITTINGS - SCH 80BLIND FLANGES VAN STONE FLANGES
WEBB BLIND FLANGES
BARREL UNIONS - FKM
FULL FACED FLANGES
1/2”
3/4”
1”
1 1/4”
1 1/2”
2”
2 1/2”
3”
4”
6”
8”
1/2”
3/4”
1”
1 1/4”
1 1/2”
2”
2 1/2”
3”
4”
6”
8”
2”
3”
4”
6”
1/2” - FKM
3/4” - FKM
1” - FKM
1 1/4” - FKM
1 1/2” - FKM
2” - FKM
2 1/2” - FKM
3” - FKM
4” - FKM
1/2”
3/4”
1”
1 1/4”
1 1/2”
2”
2 1/2”
3”
4”
6”
8”
100407176
100407181
100407179
100407178
100407177
1101620
100407180
1101640
1101650
1101660
100407182
100407517
100407524
100407521
100407520
100407519
100407523
100407522
100407525
100407526
100407527
100407528
100407220
100407221
100407222
100407223
100398760
100398766
100398763
100398762
100398761
100398765
100398764
100398767
100398768
100407265
100407271
100407268
100407267
100407266
100407270
100407269
100407272
100407273
100407274
100407275
DESCRIPTION DESCRIPTION
DESCRIPTION
DESCRIPTION
DESCRIPTION
CODE CODE
CODE
CODE
CODE
WELD-ON CEMENT FOR CPVC - SCH80
WELD-ON PRIMING FLUID FOR CPVC & PVC
473ML - 724 - GREY -
CHEMICAL APPLICATION
976ML - 724 - GREY -
CHEMICAL APPLICATION
473ML - P70
976ML - P70
100420275
100420276
100416984
100416985
DESCRIPTION
DESCRIPTION
CODE
CODE
PLUMBING CATALOGUE TOTALEDEN.COM.AU86
INDUSTRIAL PIPING SYSTEMS
TOTALEDEN.COM.AUPLUMBING CATALOGUE
IPEX® DOUBLE CONTAINMENT SYSTEMSSafety and environmental issues such as groundwater contamination have long been serious concerns for industry. With the enormous cost of litigation and contaminant clean up, increasingly stringent corporate guidelines and legal regulations, the importance of fail-safe double containment systems becomes abundantly clear.
Total Eden offer a large range of double containment systems from Ipex, a leading North American supplier of thermoplastic piping systems. Ipex have been designing and fabricating double containment systems for over 25 years including;
• Guardian™ system. Made from PVC and Corzan® CPVC, these systems offer a complete selection of pre-tested modular components that are considered unmatched in the industry. Installed using its patented Centra-Lok™ design, Guardian reduces the number of joints in a system by as much as 60%.
• Clear Guard™ is a fail-safe, pressure rated clear containment system which allows for easy detection of leaks eliminating the risk associated with piping aggressive chemicals overhead. Clear-Guard utilises Guardian’s patented Centra lock fitting design.
Ipex double containment fittings are available in clear or “cost-saving” opaque.
These and many more configurations of double containment are available from Total Eden,for further information please contact your local Total Eden representative.
PLUMBING CATALOGUETELEPHONE 1300 65 40 40 87
INDUSTRIAL PIPING SYSTEMS
CLIPS AND SADDLES
REINFORCED SUCTION HOSE - PVC - GREY - PER M
COMMERCIAL WASHDOWN HOSE
CLEAR VINYL TUBE - PER M
INDUSTRIAL HOSE
25MM32MM40MM50MM65MM75MM100MM150MM
12.5MM X 20M12.5MM X 100M20MM X 20M20MM X 100M25MM X 20M25MM X 100M
* Bundles of 20 Lengths. Bundles are plastic wrapped to keep pipe clean.
For compatible fittings with refrigeration pipe see the AS1477 BUTT-HEAD range on pages 66.
* Suits AS1477 BUTT-HEAD PVC fittings - See pages 66.
^ Suits US standard PVC imperial fittings - See Sch80 fittings on on pages 68.
INDUSTRIAL PIPING SYSTEMS
PLUMBING CATALOGUETELEPHONE 1300 65 40 40 99
INDUSTRIAL PIPING SYSTEMSINDUSTRIAL PIPING SYSTEMS
PRESSURE SOLVENT CEMENTS AND PRIMERSWELD-ON CEMENT FOR PVC - SCH80
WELD-ON CEMENT FOR CPVC - SCH80
WELD-ON PRIMING FLUID FOR CPVC & PVC
SOLVENT CEMENTS - TYPE P
PRIMING FLUIDS
LARGE BORE GAP FILLING SOLVENT CEMENTS
LARGE BORE PRIMING FLUID
CONSUMABLES
473ML - 711 GREY
976ML - 711 GREY
473ML - 724 - GREY -
CHEMICAL APPLICATION
976ML - 724 - GREY -
CHEMICAL APPLICATION
473ML - P70
976ML - P70
125ML - GREEN
250ML - GREEN
500ML - GREEN
500ML - CLEAR
1LT - GREEN
4LT - GREEN
4LT - CLEAR
250ML - RED
250ML - CLEAR
500ML - RED
500ML - CLEAR
1LT - RED
4LT - RED
4LT - CLEAR
1LT - CLEAR*
4LT - CLEAR*
1LT - PURPLE*
DUCT TAPE
10M X 12MM - TEFLON TAPE
10M X 12MM - TEFLON TAPE,
PINK
300G SILICONE SEALANT -
CLEAR NEUTRAL CURE
370G HIGH JOINT MOVEMENT
SILICONE - CHARCOAL
1LT 2 PART FERROPREE EPOXY
JOINING COMPOUND
500ML RRJ LUBRICANT
1LT RRJ LUBRICANT
100420269
100420270
100420275
100420276
100416984
100416985
100420291
100420293
100420295
100420290
100420292
100420294
100420280
100416981
100416976
100416983
100416978
100416980
100416982
100416977
100402018
100402019
100416975
100422272
3081640
4805665
4805680
4805695
100406847
3300884
100411653
DESCRIPTION
DESCRIPTION
DESCRIPTION
DESCRIPTION
DESCRIPTION
DESCRIPTION
DESCRIPTION
DESCRIPTION
CODE
CODE
CODE
CODE
CODE
CODE
CODE
CODE
* Must be used on fittings 200mm or larger.
* Must be used on fittings 200mm or larger.
PLUMBING CATALOGUE TOTALEDEN.COM.AU100
VALVESVALVES
3PLUMBING CATALOGUETELEPHONE 1300 65 40 40
VALVES
• Compact Ball Valves
• Union Ball Valves
• Butterfly Valves
• Sliding Gate Valves
• Ball Check Valves
• Swing Check Valves
• Rotary Valves
• FIP Valves
Total Eden has considerable expertise in the supply of water management solutions for our customers, and valves play an important part in the management and control of water flow, water pressure and water quality in piping systems. We supply specialised commercial and industrial strength plastic and metal valves for a variety of applications. Whether it's commercial or domestic pool construction, water treatment plants, irrigation or a range of applications within the chemical industry, we have a valve to suit the application.
Our extensive valve range comes from some of the leading domestic and international valve manufacturers ensuring peace of mind well beyond installation.
Compact Ball Valves: For pool, spa, irrigation, commercial and industrial applications.Available in diameters from 15mm to 50mm in SWJ and ½” to 4” in FI thread.
Union Ball Valves: PVC and polypropylene valves for commercial and industrial applications. Available in diameters ranging from ½” to 6”. EPDM or viton seals.
Butterfly Valves: PVC and cast iron valves for commercial and industrial applications.Available in diameters ranging from 50mm to 300mm. Gear operated or lever type.
Sliding Gate Valves: PVC valves for both non-pressure or pressure applications. Available in diameters ranging from 40mm to 150mm. PVC valve body, santoprene seals and corrosion resistant shaft.
Ball Check Valves: Suitable for commercial and industrial applications. PVC or polypropylene body in diameters from ½” to 6”. EPDM or viton seat.
Swing Check Valves: Suitable for commercial and industrial applications. PVC body in diameters ranging from 25mm to 100mm.
Rotary Valves: 2-way and 3-way full bore rotary valves, ideal for pool and spa applications.
PLUMBING CATALOGUETELEPHONE 1300 65 40 40 101
VALVES
PLASTIC VALVESSH COMPACT BALL VALVES - PVC - SWJ SH KTN BALL VALVES - PVC - FI THREAD
SH BUTTERFLY VALVE - PVC - LEVER TYPESH COMPACT BALL VALVES - PVC - FI THREAD
SAFTEY BLOCK TRUE UNION BALL VALVES - PVC - FI THD
SH SAFTEY BLOCK TRUE UNION BALL VALVES - PVC - SWJ
15MM
20MM
25MM
32MM
40MM
50MM
1/2”
3/4”
1”
1 1/4”
1 1/2”
2”
50MM - TABLE D
80MM - TABLE D
100MM - TABLE D
150MM - TABLE D
200MM - TABLE D
1/2”
3/4”
1”
1 1/4”
1 1/2”
2”
3”
4”
1/2”
3/4”
1”
1 1/4”
1 1/2”
2”
3”
4”
1/2”
3/4”
1”
1 1/4”
1 1/2”
2”
3”
4”
100425445
100425446
100425447
100425448
100425450
100425449
100425435
100425436
100425437
100425438
100425439
100425440
100424907
100424908
100424905
100424906
100424910
100425427
100425428
100425429
100425430
100425431
100425432
100425271
100425270
100426291
100426292
100426293
100426294
100426295
100426296
100426297
100426306
100426299
100426300
100426301
100426302
100426303
100426304
100426305
100426298
DESCRIPTION DESCRIPTION
DESCRIPTIONDESCRIPTION
DESCRIPTION
DESCRIPTION
CODE CODE
CODE CODE
CODE
CODE
Construction: Body - uPVC, Seat - Teflon, Seal - EPDM.
Construction: Body - uPVC, Seat - Teflon, Seal - EPDM.
Construction: Stem - uPVC, Ball - uPVC, Body - uPVC, Seat - EPDM, Stem “O” Ring - EPDM, Cap - ABS, Handle - ABS.
Construction: Body - uPVC, Seat - EPDM, Stem “O” Ring - EPDM, Cap - ABS, Handle - ABS.
Construction: Body - uPVC, Seat - EPDM, Stem “O” Ring - EPDM, Cap - ABS, Handle - ABS.
Construction: Stem - uPVC, Ball - uPVC, Body - uPVC, Seat - EPDM, Stem “O” Ring - EPDM, Cap - ABS, Handle - ABS. SH BUTTERFLY VALVE - PVC - GEARED
WAFER CHECK VALVES - PVC
200MM - TABLE E
250MM - TABLE E
300MM - TABLE E
50MM
80MM
100MM
150MM
200MM
250MM
315MM
100425016
100425017
100425018
5250070
100426477
4811115
100426478
5250120
100425699
5250170
DESCRIPTION
DESCRIPTION
CODE
CODE
Construction: Body - uPVC, Disc - PP, Seat - EPDM.
Construction: Body - uPVC, Seat - EPDM.
SH BALL CHECK VALVES - PP
3” - FLANGED - TABLE D
4” - FLANGED - TABLE D
4811180
4811185
DESCRIPTION CODE
Construction: Body - PP, Seat - Viton.
PLUMBING CATALOGUE TOTALEDEN.COM.AU102
VALVES
SLIDING GATE VALVES - SWJ - SANTOPRENE SEAL
40MM - PVC - MAX 45 PSI40MM - ABS - 3 PIECE50MM - PVC - MAX 40 PSI50MM - PVC - 3 PIECE80MM - PVC - MAX 30 PSI80MM - ABS - SPIGOT X SPIGOT - BLACK90MM - PVC - MAX 20 PSI - SUITS 90MM SW90MM - PNEUMATIC - PLASTIC PADDLE90MM - PNEUMATIC - S/S PADDLE100MM - PVC - MAX 20 PSI100MM - PNEUMATIC - DWV110MM - PVC - MAX 15 PSI - SUITS 100MM DWV150MM - PVC - MAX 15 PSI160MM - PNEUMATIC - S/S PADDLEPVC HANDLE TO SUIT 40MM - 50MMØMETAL HANDLE TO SUIT 40MM - 110MMØ90MM SEAL4” SEAL SUITS 100MM & 110MM6” & 8” SEAL
Established in 1954 FIP is Europe’s largest manufacturer of thermoplastic valves for pressure application pipelines. With over 50 years of design and manufacturing experience FIP manufactures lightweight, long life, low maintenance valves that will save you time and money. FIP compounds, most of which are engineered and developed within the FIP factory, are reliable, durable and resistant to corrosion. Utilising materials such as; UPVC, Corzan® C-PVC, PP, PVDF, ABS, FIP have a valve to suit various chemical resistance and temperature resistance requirements.
®FIP VALVES
FIP Valves are ideal for the following applications;
• Pulp and paper manufacturing
• Water and waste treatment
• De-ionised water lines
• Chemical processing
• Industrial processing
• Chlorine / alkali industries
• Hot corrosive fluids
• Swimming pools
Total Eden supplies a full range of FIP valves in both manual and actuated options.
For further information please contact your Total Eden representative.
POLY PRESSURE PIPE AND FITTINGSPOLY PRESSURE PIPE AND FITTINGS
Polyethylene pipe for pressure applications is available in diameters from 16mm to 2000mm with a range of identification colours (yellow, blue and lilac) co-extruded as stripes to allow the service application to be readily identified. Polyethylene pipe is an extremely flexible material that features high impact strength, chemical and corrosion resistance and provides many installation advantages over other materials.
Available in straight lengths and coils polyethylene pipe is complemented by Plasson and Fusion electrofusion and Plasson compression fittings.
Electrofusion fittings use heat welding provided by an electrical current, the material melts progressively and causes the pipe surface to melt and fuse with the fitting. Once cooled, a perfect cohesion of the fitting and pipe joint is achieved. A major advantage of electrofusion fittings is ability to carry a full axil load without the need for external clamping or anchoring.
Polyethylene piping systems using electrofusion fittings are the ideal solution for general water supply, sewerage, wastewater, gas distribution, slurry lines and submerged pipelines in industrial, chemical or mining applications.
PE100 buttweld pressure fittings produce a solid joint with the pipe giving end users confidence in the longevity of the piping system because joints will not decay over time. Total Eden can supply buttweld fittings from 25mm to 1200mm in diameter.
Compression fittings are an easy connection system for water supply and compressed air applications; tapping saddles are also available to suit metric polyethylene pipe.
POLY PRESSURE PIPE AND FITTINGS
• Polyethylene Pressure Pipe
• Polyethylene Gas Pipe
• Plasson® Polyethylene Electrofusion Fittings
• Plasson® Metric Compression Fittings
• Tapping Saddles - Mechanical
• Imperial/Rural Polyethylene Pipe and Fittings
• Polyethylene Buttweld Fittings
• Pipe Clips
PLUMBING CATALOGUE TOTALEDEN.COM.AU110
POLY PRESSURE PIPE AND FITTINGS
POLYETHYLENE PIPE - 25 METRE COILS
POLYETHYLENE PIPE - 50 METRE COILS
POLYETHYLENE PIPE - 100 METRE COILS
POLYETHYLENE PIPE - 150 METRE COILS
POLYETHYLENE PIPE - 300 METRE COILS
POLYETHYLENE PIPE - 200 METRE COILS
POLYETHYLENE PRESSURE PIPE - COILS
20MM - PN12.5
25MM - PN12.5
32MM - PN12.5
16MM - PN12.5
20MM - PN12.5
20MM - PN16
25MM - PN12.5
25MM - PN12.5 - LILAC
25MM - PN16
32MM - PN12.5
32MM - PN12.5 - LILAC
32MM - PN16
40MM - PN12.5
40MM - PN16
40MM - PN16 - LILAC
50MM - PN12.5
50MM - PN12.5 - LILAC
50MM - PN16
50MM - PN16 - LILAC
63MM - PN12.5
63MM - PN16
25MM - PN16
32MM - PN12.5
32MM - PN16
40MM - PN16
50MM - PN16
63MM - PN8
63MM - PN12.5
63MM - PN16
63MM - PN12.5 - LILAC
75MM - PN10
75MM - PN12.5
75MM - PN16
90MM - PN8
90MM - PN10
90MM - PN12.5
90MM - PN12.5 - LILAC
110MM - PN10
110MM - PN12.5
110MM - PN16
40MM - PN12.5 - LILAC
40MM - PN8
40MM - PN10
40MM - PN12.5
40MM - PN16
50MM - PN8
50MM - PN12.5
50MM - PN12.5 - LILAC
50MM - PN16
16MM - PN12.5
16MM - PN16
20MM - PN12.5
20MM - PN16
25MM - PN12.5
25MM - PN16
25MM - PN16 - LILAC
32MM - PN8
32MM - PN10
25MM - PN12.5 - LILAC
32MM - PN12.5
32MM - PN12.5 - LILAC
32MM - PN16
32MM - PN16 - LILAC
100208458
100414501
100414509
100414494
100414496
100414568
100414502
100414481
100414575
100414511
100414512
100414578
100414514
100414582
4000130
100414520
100414521
100414587
4000180
100414526
4000230
3283260
4806153
100414579
100414583
4000190
100414625
100414527
100414590
100414528
100414472
3283579
4554480
4626382
100414474
100414532
100414533
100414453
100414486
4000370
100414518
100414618
100414465
100414516
100414584
100414621
100414523
100414524
100414588
100414493
100414560
100414495
4000030
100414500
100414572
100414573
100414606
100414464
100414574
100414506
100414507
100414577
4515110
DESCRIPTION
DESCRIPTION
DESCRIPTION
DESCRIPTION
DESCRIPTION
DESCRIPTION
CODE
CODE
CODE
CODE
CODE
CODE
Note: Pipe coils are black with blue line unless otherwise indicated.
PLUMBING CATALOGUETELEPHONE 1300 65 40 40 111
POLY PRESSURE PIPE AND FITTINGS
POLYETHYLENE PIPE - 6 METRE STRAIGHT POLYETHYLENE PIPE - 12 METRE STRAIGHT
16MM X 100M20MM X 100M20MM X 200M32MM X 50M32MM X 100M40MM X 50M40MM X 100M40MM X 150M50MM X 7M50MM X 100M63MM X 100M90MM X 7M110MM X 6M110MM X 12M125MM X 12M160MM X 12M180MM X 12M
POLY PRESSURE PIPE AND FITTINGSPOLY PRESSURE PIPE AND FITTINGS
TOTALEDEN.COM.AUPLUMBING CATALOGUE
PLASSON® ELECTROFUSION FITTINGSPolyethylene electrofusion system for pressure and waste applications
Electrofusion is where a fitting with built in metal winding is heated by an electric current. The material melts progressively and causes the pipe surface to melt and fuse with the fitting. After cooling, a perfect cohesion of the fitting and pipe joint is obtained.
Total Eden supply a wide range of Plasson electrofusion fittings which are designed with utomatic weld time recognition, one weld voltage and do not require temperature compensation across their operating range. Once the welding machine is operating the weld is performed automatically, welding terminals include identification devices to monitor weld time and all aspects of the weld are controlled over all climatic conditions and voltages.
In conjunction with electrofusion we also supply a full range of buttweld fittings for large diameter applications.
Total Eden can supply the right tools for successful electrofusion installation including control boxes, scrapers, clamps and cleaning products. A full range of polyethylene pipe to suit Plasson electrofusion fittings is also available.
PLUMBING CATALOGUETELEPHONE 1300 65 40 40 113
POLY PRESSURE PIPE AND FITTINGSPOLY PRESSURE PIPE AND FITTINGS
32MM X 20MM32MM X 25MM40MM X 20MM40MM X 25MM40MM X 32MM50MM X 20MM50MM X 25MM50MM X 32MM50MM X 40MM63MM X 32MM63MM X 40MM63MM X 50MM90MM X 63MM110MM X 63MM110MM X 90MM125MM X 63MM125MM X 90MM125MM X 110MM160MM X 110MM180MM X 90MM180MM X 125MM200MM X 90MM
20MM X 1/2”20MM X 3/4”25MM X 1/2”25MM X 3/4”25MM X 1”32MM X 1”32MM X 1 1/4”40MM X 1”40MM X 1 1/2”50MM X 1”50MM X 1 1/4” 50MM X 1 1/2”63MM X 2”75MM X 2 1/2”75MM X 3”90MM X 3”110MM X 4”
16MM X 1/2”20MM X 1/2”20MM X 3/4”25MM X 3/4”25MM X 1”32MM X 3/4”32MM X 1”32MM X 1 1/4”40MM X 1”40MM X 1 1/4” 40MM X 1 1/2”40MM X 2”50MM X 1”50MM X 1 1/4”50MM X 1 1/2”50MM X 2”63MM X 1 1/4”63MM X 1 1/2”63MM X 2”75MM X 2”75MM X 2 1/2”75MM X 3”
16MM X 1/2”16MM X 3/4”20MM X 16MM X 3/4”20MM X 1/2”20MM X 3/4”25MM X 20MM X 3/4”25MM X 1/2”25MM X 3/4”25MM X 1”25MM X 1 1/4”32MM X 25MM X 1”32MM X 3/4”32MM X 1”32MM X 1 1/4” 32MM X 1 1/2” 40MM X 1”40MM X 1 1/4”40MM X 1 1/2”40MM X 2”50MM X 1 1/2”50MM X 2”63MM X 1 1/4”63MM X 1 1/2”63MM X 2”75MM X 2”75MM X 2 1/2”75MM X 3”90MM X 3”
TAPPING SADDLES WITH REINFORCED RING TAPPINGS SADDLES WITH REINFORCED RING - CONT.
POLY TO COPPER CONNECTORS
POLY TO COPPER ELBOWS
POLY TO COPPER KITS
TAPPING SADDLES - SUIT METRIC PE PIPE
25MM POLY X 15MM COPPER
25MM POLY X 20MM COPPER
32MM25MM40MM50MM63MM75MM90MM110MM
25MM X 1/2”32MM X 1/2” 32MM X 3/4” 40MM X 3/4” 40MM X 1” 50MM X 1/2” 50MM X 3/4” 50MM X 1” 50MM X 1 1/4” 63MM X 3/4” 63MM X 1” 63MM X 1 1/4” 63MM X 1 1/2” 75MM X 3/4”
75MM X 1” 75MM X 1 1/2” 75MM X 2” 90MM X 3/4” 90MM X 1 1/2” 140MM X 2” 140MM X 3” 160MM X 1 1/2”250MM X 2” 250MM X 3” 250MM X 4” 315MM X 3”
3/4” X 3/4”1” X 1”1 1/4” X 1 1/4”1 1/2” X 1 1/2”2” X 2”
3/4” X 1/2”3/4” X 3/4”3/4” X 1”1” X 3/4”1” X 1”1 1/4” X 3/4”1 1/4” X 1”1 1/4” X 1 1/4”1 1/2” X 1”1 1/2” X 1 1/4”1 1/2” X 1 1/2”2” X 1 1/4”2” X 1 1/2”2” X 2”
3/4” X 1/2”3/4” X 3/4”3/4” X 1”1” X 1/2”1” X 3/4”1” X 1”1 1/4” X 3/4”1 1/4” X 1”1 1/4” X 1 1/4”1 1/4” X 1 1/2”1 1/2” X 1”1 1/2” X 1 1/4”1 1/2” X 1 1/2”1 1/2” X 2”2” X 1”2” X 1 1/4”2” X 1 1/2”2” X 2”
3/4” X 1/2” 3/4” X 3/4” 1” X 3/4” 1” X 1” 1 1/4” X 3/4” 1 1/4” X 1” 1 1/4” X 1 1/4” 1 1/2” X 1” 1 1/2” X 1 1/4” 1 1/2” X 1 1/2” 1 1/2” X 2” 2” X 1” 2” X 1 1/4” 2” X 1 1/2” 2” X 2”
3/4” X 1/2”3/4” X 3/4”1” X 1/2”1” X 3/4”1” X 1”1 1/4” X 1”1 1/4” X 1 1/4”1 1/2” X 1”1 1/2” X 1 1/4”1 1/2” X 1 1/2”2” X 1”2” X 1 1/4”2” X 1 1/2”
3/4” X 16MM1” X 16MM1” X 3/4”1 1/4” X 3/4”1 1/4” X 1”1 1/2” X 1”1 1/2” X 1 1/4”2” X 1”2” X 1 1/4” 2” X 1 1/2”
3/4” X 1/2”3/4” X 3/4”1” X 3/4” X 3/4”1” X 1/2”1” X 3/4”1” X 1”1” X 1 1/4” 1 1/4” X 1” X 1”1 1/4” X 3/4”1 1/4” X 1”1 1/4” X 1 1/4”1 1/4” X 1 1/2”1 1/2” X 1”1 1/2” X 1 1/4”1 1/2” X 1 1/2”1 1/2” X 2”2” X 1 1/2”2” X 2”
3/4” X 1/2”3/4” X 3/4”1” X 1/2”1” X 3/4”1 1/4” X 1”1 1/2” X 1 1/4”1 1/2” X 1 1/2”2” X 1 1/2”
1”1 1/4”1 1/2”2”
3/4”1”1 1/4”1 1/2”2”
1” X 3/4”1 1/4” X 1” 1 1/2” X 1 1/4”2” X 1”2” X 1 1/4”2” X 1 1/2”
ELECTRICAL PRODUCTSPVC electrical conduits are designed to protect cables in a range of buried and above ground installations.
Total Eden distributes PVC conduit along with a range of PVC fittings to complement the full range of conduit direct to plumbing, civil, road making and commercial electrical contractors. In addition heavy duty cable cover is available for the protection of high voltage conduits.
PVC conduits for electrical cables are manufactured to AS2053 and available in sizes from 16mm though to 150mm.
DRADER® INJECTIWELDRepair, fabricate and prototype with Drader's high quality plastic welds.
Drader's unique Injectiweld system is known around the world for its high quality welds and ease of use. The patented Injectiweld process injects high pressure molten weld rod below the surface of the plastic creating a very strong bond. The Drader Injectiweld is capable of producing strong inconspicuous welds as small as 1.5mm.
The Injectiweld is ideal for bonding thermoplastics such as polyethylene, polypropylene,polycarbonate, polyamides, ABS and polystyrene.
Drader Injectiweld at a glance:• Strong welds - over 95% bond strength, very close to virgin material• Portable - ideal for onsite repairs• Compact - one handed use allows you to reach confined space easily• No oxidation - does not use hot air• Interchangeable welding tips - to best suit your needs• Custom welding rods - get an exact colour and material match
Total Eden is proudly the Australasian distributor and service agent for the Drader Injectiweld. For Drader sales and service please call us on 1300 65 40 40.
WATER TANKSTotal Eden has been providing rainwater harvesting solutions for over 20 years and has access to all the major brands of metal and polyethylene tanks across Australia.
We boast the personnel with the skills and experience to design a complete water tank system tailored to your budget and specific needs:
Drader Injectiweld at a glance:• Tanks for water reclamation and re-use for industrial and warehouse developments• Comprehensive systems for fire protection purposes• Large scale rural and commercial water storage tanks• Complete range of slim-line tanks for domestic and commercial use• Pumps, hose kits, pipe, rainwater harvesting controllers and accessories
Plastic rainwater tanks range from 330 litres 45,000 litres. Metal corrugated water tanks range in size up to 250,000 litres and come in zincalume or the full range of Colorbond® colours. Flat panel metal tanks for large scale applications range from 10 - 1,000 kilolitres.Whatever your water collection needs, contact us for the best service, advice and supply - nationwide.
PLUMBING CATALOGUE TOTALEDEN.COM.AU134
TABLES AND CONVERSIONSPUMPS
PLUMBING CATALOGUETELEPHONE 1300 65 40 40
15
20
25
32
40
50
65
80
100
125
150
155
175
195
200
225
250
300
375
48.25
60.35
75.35
88.90
114.30
140.20
160.25
168.25
200.25
219.10
225.30
250.35
280.40
315.45
400.50
45.2
56.8
71.0
83.7
107.8
132.2
151.3
158.7
190.1
206.7
213.8
237.7
266.2
299.5
380.3
1.53
1.78
2.18
2.60
3.25
4.00
4.47
4.78
5.08
6.20
5.75
6.33
7.10
7.97
10.10
1.9
2.8
4.3
6.1
10.0
15.1
20.0
22.0
29.0
38.0
35.0
44.0
55.0
69.0
113.0
33.55
42.25
48.25
60.35
75.35
88.90
114.30
140.20
160.25
168.25
200.25
219.10
225.30
250.35
280.40
315.45
400.50
30.5
38.5
44.1
55.2
68.9
81.3
104.6
128.4
146.9
154.2
185.2
200.8
208.5
231.7
259.4
292.0
370.7
1.53
1.88
2.08
2.58
3.22
3.80
4.85
5.90
6.68
7.03
7.53
9.15
8.40
9.33
10.50
11.73
14.90
1.3
2.0
2.6
4.2
6.4
8.8
14.7
22.3
29.0
31.0
42.0
56.0
51.0
63.0
80.0
101.0
166.0
26.75
33.55
42.25
48.25
60.35
75.35
88.90
114.30
140.20
160.25
168.25
200.25
219.10
225.30
250.35
280.40
315.45
400.50
23.7
29.8
37.5
42.8
53.7
67.0
79.0
101.7
124.9
142.7
149.9
180.6
195.2
203.1
225.8
252.9
284.5
361.2
1.53
1.88
2.38
2.73
3.33
4.18
4.95
6.30
7.65
8.78
9.18
9.83
11.95
11.10
12.28
13.75
15.48
19.65
1.0
1.6
2.6
3.4
5.3
8.2
11.5
20.0
28.5
38.0
40.0
55.0
72.0
67.0
82.0
104.0
133.0
216.0
21.35
26.75
33.55
42.25
48.25
60.35
75.35
88.90
114.30
140.20
160.25
168.25
200.25
219.10
225.30
250.35
280.40
315.45
400.50
17.8
22.4
28.1
35.4
40.5
50.5
63.2
74.6
96.0
117.7
134.7
141.4
171.5
184.2
192.9
214.4
240.1
270.2
343.0
1.78
2.18
2.73
3.43
3.88
4.93
6.08
7.15
9.15
11.25
12.78
13.43
14.38
17.45
16.20
17.98
20.15
22.63
28.75
0.9
1.5
2.3
3.7
4.8
7.6
12.8
16.2
27.0
44.6
58.0
60.0
78.0
112.0
95.0
118.0
149.0
190.0
310.0
½”
”
”
”
”
”
”
”
”
”
”
”
1”
1 ”
1 ½”
2”
2 ½”
3”
4”
5
6
6
7
8
8
9
10
12
15
UPVC PRESSURE PIPE DIMENSIONS AS/NZS 1477 SERIES 1 - 6 METRE LENGTHS
AS/NZS 1477 - PVC Pipe and Fittings for pressure applications
PUMPSTotal Eden is ideally positioned to deliver quality pumps and pump sets to suit applications large and small. With over 20 years advising customers across Australia of the right solution for their pumping needs.
Whether it is in the commercial building services area, commercial swimming pools and resorts, water supply and waste water services, rainwater harvesting or industrial pumping applications, the Trade Direct Team at Total Eden are your ideal partner.
We understand the diversity of applications and work with all the major manufacturers to ensure the best possible solution for you and your clients. We invest in our people so you can be assured they have the expertise and skills to ensure we provide the right solution every time. Together with our ability to supply a wide range
of pipes and fittings, water treatment and filtration you have the ideal supplier for fully integrated and innovative water management systems.
• Jet Pumps• Horizontal Multi Stage Pumps• Vertical Multi Stage Pumps• ISO Spec Pumps• Submersible Pumps• Submersible Grinders & Cutters• Submersible Slurry Pumps• Circulation Pumps - Hot water
• Borehole Pumps• Solar Pumping Systems• Dosing Pumps• Pump Control Systems• Pump Sets• Sanitary Pumps• Transfer Pumps• In-line booster Pumps
For further information on our complete range of pumps, contact your Total Eden sales representative.
PLUMBING CATALOGUETELEPHONE 1300 65 40 40 135
TABLES AND CONVERSIONSTABLES AND CONVERSIONSPUMPS
15
20
25
32
40
50
65
80
100
125
150
155
175
195
200
225
250
300
375
48.25
60.35
75.35
88.90
114.30
140.20
160.25
168.25
200.25
219.10
225.30
250.35
280.40
315.45
400.50
45.2
56.8
71.0
83.7
107.8
132.2
151.3
158.7
190.1
206.7
213.8
237.7
266.2
299.5
380.3
1.53
1.78
2.18
2.60
3.25
4.00
4.47
4.78
5.08
6.20
5.75
6.33
7.10
7.97
10.10
1.9
2.8
4.3
6.1
10.0
15.1
20.0
22.0
29.0
38.0
35.0
44.0
55.0
69.0
113.0
33.55
42.25
48.25
60.35
75.35
88.90
114.30
140.20
160.25
168.25
200.25
219.10
225.30
250.35
280.40
315.45
400.50
30.5
38.5
44.1
55.2
68.9
81.3
104.6
128.4
146.9
154.2
185.2
200.8
208.5
231.7
259.4
292.0
370.7
1.53
1.88
2.08
2.58
3.22
3.80
4.85
5.90
6.68
7.03
7.53
9.15
8.40
9.33
10.50
11.73
14.90
1.3
2.0
2.6
4.2
6.4
8.8
14.7
22.3
29.0
31.0
42.0
56.0
51.0
63.0
80.0
101.0
166.0
26.75
33.55
42.25
48.25
60.35
75.35
88.90
114.30
140.20
160.25
168.25
200.25
219.10
225.30
250.35
280.40
315.45
400.50
23.7
29.8
37.5
42.8
53.7
67.0
79.0
101.7
124.9
142.7
149.9
180.6
195.2
203.1
225.8
252.9
284.5
361.2
1.53
1.88
2.38
2.73
3.33
4.18
4.95
6.30
7.65
8.78
9.18
9.83
11.95
11.10
12.28
13.75
15.48
19.65
1.0
1.6
2.6
3.4
5.3
8.2
11.5
20.0
28.5
38.0
40.0
55.0
72.0
67.0
82.0
104.0
133.0
216.0
21.35
26.75
33.55
42.25
48.25
60.35
75.35
88.90
114.30
140.20
160.25
168.25
200.25
219.10
225.30
250.35
280.40
315.45
400.50
17.8
22.4
28.1
35.4
40.5
50.5
63.2
74.6
96.0
117.7
134.7
141.4
171.5
184.2
192.9
214.4
240.1
270.2
343.0
1.78
2.18
2.73
3.43
3.88
4.93
6.08
7.15
9.15
11.25
12.78
13.43
14.38
17.45
16.20
17.98
20.15
22.63
28.75
0.9
1.5
2.3
3.7
4.8
7.6
12.8
16.2
27.0
44.6
58.0
60.0
78.0
112.0
95.0
118.0
149.0
190.0
310.0
½”
”
”
”
”
”
”
”
”
”
”
”
1”
1 ”
1 ½”
2”
2 ½”
3”
4”
5
6
6
7
8
8
9
10
12
15
UPVC PRESSURE PIPE DIMENSIONS AS/NZS 1477 SERIES 1 - 6 METRE LENGTHS
Note: Gallons are imperial gallons unless otherwise stated
PLUMBING CATALOGUETELEPHONE 1300 65 40 40
Disclaimer: Product dimensions, weights and conversion tables are to
be used as a guide only.
Total Eden does not accept responsibility for any errors or omissions.
PLUMBING CATALOGUETELEPHONE 1300 65 40 40 141
TABLES AND CONVERSIONSTABLES AND CONVERSIONS
FLANGE TABLES
STANDARDDIAMETER
OF FLANGEINCH : MM
BCD/PCDINCH : MM
NO. OF BOLTS DI. OF BOLTSINCH : MM
DI. OF HOLESINCH : MM
DI. OFRAISED FACEINCH : MM
HEIGHT OFRAISED FLANGE
MM
GREY CASTIRON
INCH : MM
COPPERALLOY
INCH : MM
CAST &FORGED STEEL
INCH : MM
NOMINAL BORE 3/4” : 20MM
NOMINAL BORE 1/2” : 15MM
NOMINAL BORE 1” : 25MM
NOMINAL BORE 1 1/4” : 32MM
NOMINAL BORE 1 1/2” : 40MM
NOMINAL BORE 2” : 50MM
NOMINAL BORE 2 1/2” : 65MM
NOMINAL BORE 3” : 80MM
NOMINAL BORE 4” : 100MM
NOMINAL BORE 5” : 125MM
NOMINAL BORE 6” : 150MM
NOMINAL BORE 8” : 200MM
NOMINAL BORE 10” : 250MM
NOMINAL BORE 12” : 300MM
THICKNESS OF FLANGE
THICKNESS OF FLANGE
THICKNESS OF FLANGE
THICKNESS OF FLANGE
THICKNESS OF FLANGE
THICKNESS OF FLANGE
THICKNESS OF FLANGE
THICKNESS OF FLANGE
THICKNESS OF FLANGE
THICKNESS OF FLANGE
THICKNESS OF FLANGE
THICKNESS OF FLANGE
THICKNESS OF FLANGE
THICKNESS OF FLANGE
3 3/4 : 95
3 3/4 : 95
3 1/2 : 89
95
4 : 102
4 : 102
3 7/8 : 98
105
4 1/2 : 114
4 1/2 : 114
4 1/4 : 108
115
4 3/4 : 121
4 3/4 : 121
4 5/8 : 118
140
5 1/4 : 133
5 1/4 : 133
5 : 127
150
6 : 152
6 : 152
6 : 152
165
6 1/2 : 165
6 1/2 : 165
7 : 178
185
7 1/4 : 184
7 1/4 : 184
7 1/2 : 191
200
8 1/2 : 216
8 1/2 : 216
9 : 229
220
10 : 254
10 : 254
10 : 254
250
11 : 279
11 : 279
11 : 279
285
13 1/4 : 337
13 1/4 : 337
13 1/2 : 343
340
16 : 406
16 : 406
16 : 406
395
18 : 457
18 : 457
19 : 483
445
2 5/8 : 67
2 5/8 : 67
2 3/8 : 60
65
2 7/8 : 73
2 7/8 : 73
2 3/4 : 70
75
3 1/4 : 83
3 1/4 : 83
3 1/8 : 79
85
3 7/16 : 87
3 7/16 : 87
3 1/2 : 89
100
3 7/8 : 98
3 7/8 : 98
3 7/8 : 98
110
4 1/2 : 114
4 1/2 : 114
4 3/4 : 121
125
5 : 127
5 : 127
5 1/2 : 140
145
5 3/4 : 146
5 3/4 : 146
6 : 152
160
7 : 178
7 : 178
7 1/2 : 191
180
8 1/4 : 210
8 1/4 : 210
8 1/2 : 216
210
9 1/4 : 235
9 1/4 : 235
9 1/2 : 241
240
11 1/2 : 292
11 1/2 : 292
11 3/4 : 299
295
14 : 356
14 : 356
14 1/4 : 362
350
16 : 406
16 : 406
17 : 432
400
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
8
4
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
12
12
12
12
12
12
12
1/2 : 13
1/2 : 13
1/2 : 13
M12
1/2 : 13
1/2 : 13
1/2 : 13
M12
1/2 : 13
1/2 : 13
1/2 : 13
M12
1/2 : 13
1/2 : 13
1/2 : 13
M16
1/2 : 13
1/2 : 13
1/2 : 13
M16
5/8 : 16
5/8 : 16
5/8 : 16
M16
5/8 : 16
5/8 : 16
5/8 : 16
M16
5/8 : 16
5/8 : 16
5/8 : 16
M16
5/8 : 16
5/8 : 16
5/8 : 16
M16
5/8 : 16
5/8 : 16
3/4 : 19
M16
5/8 : 16
3/4 : 19
3/4 : 19
M20
5/8 : 16
3/4 : 19
3/4 : 19
M20
3/4 : 19
3/4 : 19
7/8 : 22
M20
3/4 : 19
7/8 : 22
7/8 : 22
M20
9/16 : 14
9/16 : 14
5/8 : 16
14
9/16 : 14
9/16 : 14
5/8 : 16
14
9/16 : 14
9/16 : 14
5/8 : 16
14
9/16 : 14
9/16 : 14
5/8 : 16
18
9/16 : 14
9/16 : 14
5/8 : 16
18
11/16 : 17.5
11/16 : 17.5
3/4 : 19
18
11/16 : 17.5
11/16 : 17.5
3/4 : 19
18
11/16 : 17.5
11/16 : 17.5
3/4: 19
18
11/16 : 17.5
11/16 : 17.5
3/4 : 19
18
11/16 : 17.5
11/16 : 17.5
7/8 : 22
18
11/16 : 17.5
7/8 : 22
7/8 : 22
22
11/16 : 17.5
7/8 : 22
7/8 : 22
22
7/8 : 22
7/8 : 22
1 : 25
22
7/8 : 22
1 : 25
1 : 25
22
-
-
1 3/8 : 35
45
-
-
1 11/16 : 43
58
-
-
2 : 51
68
-
-
2 1/2 : 63.5
78
-
-
2 7/8 : 73
88
-
-
3 5/8 : 92
102
-
-
4 1/8 : 105
122
-
-
5 : 127
138
-
-
6 3/16 : 157
158
-
-
7 5/16 : 186
188
-
-
8 1/2 : 216
212
-
-
10 5/8 : 270
268
-
-
12 3/4 : 324
320
-
-
15 : 381
370
-
-
-
2
-
-
-
2
-
-
-
2
-
-
-
2
-
-
-
3
-
-
-
3
-
-
-
3
-
-
-
3
-
-
-
3
-
-
-
3
-
-
-
3
-
-
-
3
-
-
-
3
-
-
-
4
1/2 : 13
1/2 : 13
-
14
1/2 : 13
1/2 : 13
-
16
1/2 : 13
1/2 : 13
7/16 : 11
16
5/8 : 16
5/8 : 16
1/2 : 13
18
5/8 : 16
5/8 : 16
9/16 : 14
18
11/16 : 17.5
3/4 : 19
5/8 : 16
20
11/16 : 17.5
3/4 : 19
11/16 : 17.5
20
3/4 : 19
3/4 : 19
3/4 : 19
22
3/4 : 19
7/8 : 22
15/16 : 24
24
13/16 : 21
7/8 : 22
15/16 : 24
26
13/16 : 21
7/8 : 22
1 : 25
26
7/8 : 22
1 : 25
1 1/8 : 29
26
1 : 25
1 : 25
1 3/16 : 30
28
1 : 25
1 1/8 : 29
1 1/4 : 32
28
1/4 : 6
1/4 : 6
5/16 : 8
-
1/4 : 6
1/4 : 6
11/32 : 9
-
5/16 : 8
5/16 : 8
3/8 : 9.5
-
5/16 : 8
5/16 : 8
13/32 : 10
-
3/8 : 9.5
3/8 : 9.5
7/16 : 11
-
3/8 : 9.5
3/8 : 9.5
1/2 : 13
-
7/16 : 11
7/16 : 11
9/16 : 14
-
1/2 : 13
1/2 : 13
5/8 : 16
-
5/8 : 16
5/8 : 16
11/16 : 17.5
-
11/16 : 17.5
11/16 : 17.5
3/4 : 19
-
11/16 : 17.5
11/16 : 17.5
13/16 : 21
-
3/4 : 19
3/4 : 19
15/16 : 24
-
3/4 : 19
7/8 : 22
1 : 25
-
7/8 : 22
1 : 25
1 1/16 : 27
-
3/8 : 9.5
3/8 : 9.5
7/16 : 11
-
3/8 : 9.5
3/8 : 9.5
9/16 : 14
-
3/8 : 9.5
3/8 : 9.5
7/16 : 11
-
1/2 : 13
1/2 : 13
1/2 : 13
-
1/2 : 13
1/2 : 13
9/16 : 14
-
9/16 : 14
9/16 : 14
5/8 : 16
-
9/16 : 14
9/16 : 14
11/16 : 17.5
-
9/16 : 14
9/16 : 14
3/4 : 19
-
11/16 : 17.5
11/16 : 17.5
15/16 : 24
-
11/16 : 17.5
11/16 : 17.5
15/16 : 24
-
11/16 : 17.5
11/16 : 17.5
1 : 25
-
3/4 : 19
3/4 : 19
1 1/8 : 29
-
3/4 : 19
7/8 : 22
1 3/16 : 30
-
7/8 : 22
1 : 25
1 1/4 : 32
-
TABLE D
TABLE E
ANSI 125/50
DIN 10
TABLE D
TABLE E
ANSI 125/50
DIN 10
TABLE D
TABLE E
ANSI 125/50
DIN 10
TABLE D
TABLE E
ANSI 125/50
DIN 10
TABLE D
TABLE E
ANSI 125/50
DIN 10
TABLE D
TABLE E
ANSI 125/50
DIN 10
TABLE D
TABLE E
ANSI 125/50
DIN 10
TABLE D
TABLE E
ANSI 125/50
DIN 10
TABLE D
TABLE E
ANSI 125/50
DIN 10
TABLE D
TABLE E
ANSI 125/50
DIN 10
TABLE D
TABLE E
ANSI 125/50
DIN 10
TABLE D
TABLE E
ANSI 125/50
DIN 10
TABLE D
TABLE E
ANSI 125/50
DIN 10
TABLE D
TABLE E
ANSI 125/50
DIN 10
PLUMBING CATALOGUETELEPHONE 1300 65 40 40
CONVERSION FACTORS TABLE
FROM TO MULTIPLY BY
VOLUME
FLOW
FLOW
FLOW
FLOW
FLOW
US gallon
imperial gallon
litres
imperial gallon
cubic metres
litres
cubic metres/sec
cubic metres/hr
gallons/min
cubic metres/hr
cubic metres/hr
metres/sec
metres/sec
metres/sec
horsepower
kilowatts
pound/sq. inch
Pascals
pounds/cu. foot
kilograms/cu. m
kilograms/sq. m
Pascals
Pascals
kilopascals
feet head
feet head
metres head
kilopascals
pound/sq. inch
metres head
pound/sq. inch
kilopascals
hectares
square metres
hectares
acres
FLOW
FLOW
FLOW
FLOW
FLOW
FLOW
1.2
0.83
4.55
0.22
0.001
28.32
0.0000523
0.272
3.67
3.6
0.06
0.00508
0.3048
0.2778
0.746
1.34
14.223
9.807
0.06243
16.019
4.8824
47.88
6.894
3.35
0.2984
2.31
0.102
9.83
1.422
0.703
0.145
6.895
0.0001
10
0.405
2.469
VOLUME
imperial gallon
US gallon
imperial gallon
litres
litres
cubic feet
FLOW
gallons/min
gallons/min
cubic metres/hr
litres/sec
litres/min
VELOCITY
feet/min
feet/sec
kilometres/hour
POWER
kilowatts
horsepower
PRESSURE
kilograms/sq. cm
kilograms/sq. m
kilograms/cu. m
pounds/cu. foot
pounds/sq. foot
pounds/sq. foot
pounds/sq. inch
feet head
kilopascals
pounds/sq. inch
kilopascals
metres head
metres head
pounds/sq. inch
kilopascals
pounds/sq. inch
AREA
square metres
hectares
acres
hectares
IMPERIAL THREAD SIZES
IMPERIAL SIZE METRIC EQUIVALENT (NOMINAL)
1/16"
1/8”
3/16”
1/4”
3/8”
1/2”
3/4”
1”
1 1/4”
1 1/2”
2”
2 1/2”
3”
4”
1.6 mm
3.2 mm
5 mm
6 mm
10 mm
13 mm or 15 mm
19 mm or 20 mm
25 mm
32 mm
40 mm
50 mm
65 mm
80 mm
100 mm
Note: Gallons are imperial gallons unless otherwise stated
PLUMBING CATALOGUETELEPHONE 1300 65 40 40
Disclaimer: Product dimensions, weights and conversion tables are to
be used as a guide only.
Total Eden does not accept responsibility for any errors or omissions.
PLUMBING CATALOGUE TOTALEDEN.COM.AU142
TABLES AND CONVERSIONS
NOTES
PLUMBING CATALOGUETELEPHONE 1300 65 40 40 143
TABLES AND CONVERSIONSTABLES AND CONVERSIONS
NOTES
PLUMBING CATALOGUE TOTALEDEN.COM.AU144
TABLES AND CONVERSIONS
NOTES
PLUMBING CATALOGUETELEPHONE 1300 65 40 40 145
TABLES AND CONVERSIONSTABLES AND CONVERSIONS
NOTES
PLUMBING CATALOGUE TOTALEDEN.COM.AU146
TABLES AND CONVERSIONS
NOTES
PLUMBING CATALOGUETELEPHONE 1300 65 40 40 147
TABLES AND CONVERSIONSTABLES AND CONVERSIONS
OUR TRADING TERMSTerms and Conditions of Supply 1. Unless otherwise agreed in writing by Total Eden Pty Ltd (the Seller), the Buyer agrees that it will be bound by these terms and conditions if the Buyer places an order with the Seller and it is accepted by the Seller. The Seller is not bound by any terms and conditions contained in any document issued by the Buyer.
Orders, Quotations and Price2. Once an order has been accepted by the Seller, it cannot be cancelled by the Buyer. The supply of goods or services is subject to availability. The Seller reserves the right to suspend or discontinue the supply of goods or services to the Buyer. If the Seller is unable to supply all of the Buyer’s order, these terms and conditions continue to apply to any part of the order supplied.
3. Where a written quotation has been given by the Seller, the selling price is the price specified in the quotation. In any other case, the Seller’s selling price is the price specified in the price list as at the date of despatch. Unless otherwise stated, the selling price does not include GST. The Seller may at any time change its price list to reflect, among other things, changes in exchange rates or the imposition of any duties, levies or other taxes and the Buyer is bound by those changes.
Delivery 4. Unless otherwise agreed in writing by the Seller, delivery is at the Seller’s premises. All freight from the Seller’s premises to the Buyer is at the Buyer’s expense. If the Seller arranges the carriage of the goods for delivery to the Buyer, the Seller will be deemed to contract as agent for the Buyer, and the Buyer will bear all risks with respect to the goods during carriage and will likewise be responsible for effecting any insurance of the goods during carriage. The Seller may charge a reasonable handling fee for all orders delivered to the Buyer. The Buyer indemnifies the Seller for the cost of all transport arranged by the Seller on the Buyer’s behalf.
5. If a delivery date is specified, that date is an estimate only and the Seller is not liable for any delay in delivery. Time is not of the essence in relation to delivery and the Buyer must accept delivery and pay for the goods delivered, including transport costs if applicable, even if they are delivered after any specified delivery date.
Inspection, Acceptance and Returns6. The Buyer must inspect the goods or services immediately following delivery or completion of the services (as the case may be). The Buyer may only return goods with the prior approval of the Seller and within 30 days of the date of delivery in re-saleable condition and, where appropriate, in the original packaging. A reasonable handling fee for any returned goods will be charged to the Buyer.
Any claim that the goods or services are not in accordance with these terms and conditions (including if they are defective, damaged during delivery, are short delivered or services not as per contract) must be made at the time of delivery/services provided or in writing to the Seller within 48 hours after delivery of the goods/completion of the services to the Buyer. If the Buyer fails to make a claim then, to the extent permitted by law, the goods or services are deemed to have been accepted by the Buyer and the Buyer must pay for the goods or services in accordance with these terms and conditions.
Payment7. Unless otherwise agreed, if the Buyer has an approved credit account with the Seller, the Buyer must pay for goods or services ordered by the Buyer within 30 days from the end of the month of invoicing, or earlier if the approved credit limit is exceeded. Where the Buyer does not have a credit account with the Seller, all goods and services are to be paid for at the time of delivery. The Seller may charge an administration fee for any payments by credit card. Time is of the essence in respect of the Buyer’s obligation to make payment for goods or services supplied by the Seller to the Buyer.
8. If the Buyer does not make any payment by the due date, exceeds its credit limit at any time, commits any other material breach of these terms and conditions, or an insolvency event in respect of the Buyer arises or is reasonably suspected by the Seller, the Seller may (without limiting any other right or claim it may have against the Buyer) do any or all of the following:a) charge the Buyer interest calculated on a daily basis on any portion of the Buyer’s account that is overdue at the Australian & New Zealand Banking Group’s reference rate for business loans, available to prime commercial customers, plus 5% calculated from the date the payment was due until the date payment is made (both dates inclusive);b) vary or withdraw any approved credit limit and/or terms of trade;c) cancel or suspend any unfilled orders or cease providing the services;d) terminate any contracts between the Seller and the Buyer and demand immediate payment of any moneys due and outstanding under those contracts;e) cancel any rebate, discount or allowance due or payable by the Seller as at the date of the event;f ) enter (at any time) any premises in which the Seller’s goods (including any merchandising materials) are stored, to enable the Seller to inspect the goods and to reclaim possession of the goods without liability for the tort of trespass, negligence or payment of any compensation to the Buyer whatsoever; org) institute any recovery process as the Seller in its discretion decides at the Buyer’s cost and expense.
9. If any part of an invoice is in dispute, the balance will remain payable and must be paid when due. The Buyer has no right to set-off any claim against the Seller from moneys owing to the Seller.
Risk and Title10. Goods supplied by the Seller to the Buyer are at the Buyer’s risk immediately on the earlier of delivery to the Buyer or into the Buyer’s custody, including its carrier or forwarder. The Buyer must insure the goods at its cost from delivery of the goods until they are paid for in full against such risks as are usual or common to insure against in a business of a similar nature to the Buyer.
11. Property in the goods supplied by the Seller to the Buyer does not pass to the Buyer until all goods have been paid for in full. In the meantime, the Buyer takes custody of the goods and retains them only as fiduciary agent and bailee of the Seller. Until all goods have been paid for in full:a) to the extent possible, the Buyer must store the goods in a manner that shows clearly they are the property of the Seller, maintain records relating to the goods, secure the goods from risk, damage and theft and ensure that the goods are kept in good and serviceable condition;b) the Buyer may sell the goods, in the ordinary course of its business, but only as fiduciary agent of the Seller. The Buyer must not represent to any third party that the Buyer is acting in any capacity for or on behalf of the Seller and the Buyer has no authority to bind the Seller to any contract or otherwise assume any liability for or on behalf of the Seller. The Buyer receives all proceeds (including any proceeds from insurance claims) in trust for the Seller and must keep the proceeds in a separate bank account until all liability to the Seller is discharged; c) if the Buyer uses the goods in some manufacturing or construction process of its own or of a third party, the Buyer must hold in trust for the Seller that part of the proceeds of the manufacturing or construction process as is equal to the amount owing by the Buyer to the Seller at the time of receipt of the proceeds.
Designs, Drawings and Instructions12. The Seller will retain ownership and all copyright in relation to all designs and drawings prepared for or on behalf of the Buyer, despite any payment made in accordance with these terms of sale.
13. Where the Supplier has followed a design or instruction furnished by or on behalf of the Buyer, the Buyer indemnifies and will keep the Seller indemnified against all claims, damages, losses, penalties, costs and expenses to which the Seller may become liable by reason of any work required to be done in accordance with those instructions or design including any infringement of any patent, registered design, copyright or any other right of a third party including moral rights.
Limitation of Liability14. Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. The Buyer is entitled to a replacement of refund for a major failure and for compensation for any other reasonably foreseeable loss or damage. The Buyer is also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure.
Subject to the above, the Seller is not liable to the Buyer (whether in contract, tort including negligence, pursuant to statute or otherwise) for any loss of production, loss of business, loss of contract, loss of profit, goodwill or increased cost of workings or any other special, indirect, incidental or consequential damages, whether or not the possibility of such damages could have been reasonably foreseen.
Product Warranty15. All products advertised or displayed on the Seller’s website at www.totaleden.com.au are subject to a manufacturer’s warranty. The term of this warranty is subject to the individual manufacturer. The Seller is a reseller of products on behalf of manufacturers and the Seller does not take responsibility for the performance of these products.
For a copy of our full warranty policy please download the Total Eden Warranty Terms and Conditions.
Other Terms 16. This agreement contains the entire understanding of the parties as to its subject matter. There is no other understanding agreement, warranty or representation whether express or implied in any way defining or extending or otherwise relating to these provisions or binding on the parties with respect to the goods of their operation.
17. The application of the United Nations Convention on Contracts for the International Sale of Goods (known as the Vienna Sales Convention 1980) is excluded.
18. If any provision of these terms or conditions is unenforceable, illegal or void, that provision is severed and the other provisions remain in force.
19. The Seller may amend or vary these terms and conditions by notifying the Buyer in writing of the amendment or variation.