toshiba lcd tv service manual

7/21/2019 toshiba lcd tv service manual

1/32

SERVICE MANUAL

LCD Color Television

42HL67 Rev.1

This model is classified as a green product (*1), as indicated by the underlined serial number.

This Service Manual describes replacement parts for the green product. When repairing thisgreen product, use the part(s) described in this manual and lead-free solder(*2).

For (*1) and (*2), refer to GREEN PRODUCT PROCUREMENTand LEAD-FREE

SOLDER.

TOSHIBA CORPORATION 2009

For Technical Bulletins, Technical Tips, or other information regarding the

service of this model, visit the Toshiba America Consumer Products National

Service Division website at:

www7.toshiba.com

loaded from www.Manualslib.commanuals search engine
http://www.manualslib.com/http://www.manualslib.com/


2/32

IMPORTANT NOTICE

WARNING: Do not modify or alter the information or data provided herein without prior written consent by Toshiba.Toshiba shall not be liable to anybody for any damages, losses, expenses or costs, if any, incurred in connection with oras a result of such modification or alteration.

THE INFORMATION OR DATA HEREIN SHALL BE PROVIDED "AS IS" WITHOUT ANY WARRANTY OF ANY KIND, EITHEREXPRESS OR IMPLIED WARRANTY OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.

Toshiba shall not be liable for any damages, losses, expenses or costs, if any, incurred in connection with or as a result ofuse of any information or data provided herein.

GREEN PRODUCT PROCUREMENT

The EC is actively promoting the WEEE & RoHS Directives that define standards for recycling and reuse of Waste Electrical andElectronic Equipment and for the Restriction of the use of certain Hazardous Substances. From July 1, 2006, the RoHS Directive willprohibit any marketing of new products containing the restricted substances.

Increasing attention is given to issues related to the global environmental. Toshiba Corporation recognizes environmental protectionas a key management tasks, and is doing its utmost to enhance and improve the quality and scope of its environmental activities. Inline with this, Toshiba proactively promotes Green Procurement, and seeks to purchase and use products, parts and materials thathave low environmental impacts.

Green procurement of parts is not only confined to manufacture. The same green parts used in manufacture must also be used asreplacement parts.

LEAD-FREE SOLDER

WARNING: This product is manufactured using lead-free solder as a part of a movement within the consumer products industry atlarge to be environmentally responsible. Lead-free solder must be used in the servicing and repair of this product.

The melting temperature of lead-free solder is higher than that of leaded solder by 86F to 104F (30C to 40C). Use of a solderingiron designed for lead-based solders to repair product made with lead-free solder may result in damage to the component and orPCB being soldered. Great care should be made to ensure high-quality soldering when servicing this product especially whensoldering large components, through-hole pins, and on PCBs as the level of heat required to melt lead-free solder is high.

SAFETY INSTRUCTION

WARNING: Before servicing this chassis, read the "Safety Precaution"and "Product Safety Notice"instructions below.

Safety Precaution

WARNING: Servicing should not be attempted by anyone unfamiliar with the necessary precautions on this receiver. The followingare the necessary precautions to be observed before servicing this chassis.

1. An isolation transformer should be connected in the power line between the receiver and the AC line before any service isperformed on the receiver.

2. Always disconnect the power plug before any disassembling of the product. It may result in electrical shock.

3. When replacing a chassis in the cabinet, always be certain that all the protective devices are put back in place, such as

nonmetallic control knobs, insulating covers, shields, isolation resistor-capacitor network, etc.

4. Always keep tools, product components, etc. away from children as these items may cause injury.

5. Depending on the model, use an isolation transformer or wear suitable gloves when servicing with the power on.Disconnect the power plug to avoid electrical shock when replacing parts. In some cases, alternating current is alsoimpressed in the chassis, so electrical shock is possible if the chassis is contacted with the power on.

6. Always use the replacement parts specified for the particular model when making repairs. The parts used in productsrequire special safety characteristics such as inflammability; voltage resistance, etc. therefore, use only replacement parts

11



3/32

that have these same characteristics. Use only the specified parts when the mark is indicated in the circuit diagram orparts list.

7. Part mounting and wire routing should be the same as that used originally. For safety purposes, insulating materials such asisolation tubes or tape are sometimes used and printed circuit boards are sometimes mounted floating. Also make sure thatwiring is routed and clamped to avoid parts that generate heat or use high voltage. Always follow the manufactures wiringroutes / dressings.

8. Always ensure that all internal wirings are in accordance before re-assembling the external casing after a repair iscompleted. Do not allow internal wiring to be pinched by cabinets, panels, etc. Any error in reassembly or wiring can resultin electrical leakage, flame, etc., and may be hazardous.

9. NEVER remodel the product in any way. Remodeling can result in improper operation, malfunction, electrical leakage, orflame, which may be hazardous.

10. Always perform an AC leakage current check on the exposed metallic parts of the cabinet such as antennas, terminals,screw heads, metal overlays, control shafts, etc. to be sure that the set is safe to operate without any danger of electricalshock before returning the set to the customer.

11. To check leakage current: (After completing the work, measure the leakage current to prevent an electrical shock.)

Plug the AC line cord directly into a 120V AC outlet. Do not use an isolation transformer for this check.

Use an AC voltmeter having 5000 ohms per volt or more sensitivity in the following manner.

Connect a 1500 ohm 10 watt resistor, paralleled by a 0.15 F, AC type capacitor, between a known good earth ground (water pipe,conduit, etc.) and the exposed metallic parts, one at a time. Measure the AC voltage across the combination of 1500 ohm resistorand 0.15 F capacitor. Reverse the AC plug at the AC outlet and repeat AC voltage measurements for each exposed metallic part.Voltage measured must not exceed 0.3 volts rms. This corresponds to 0.2 milliamps AC. Any value exceeding this limit constitutes apotential shock hazard and must be corrected immediately.

Product Safety Notice

Many electrical and mechanical parts in this chassis have special safety-related characteristics. These characteristics are often

overlooked in a visual inspection. The protection afforded by them cannot necessarily be obtained by using replacement

components rated for higher voltage, wattage, etc. Replacement parts which have these special safety characteristics are identified

in this manual and its supplements. Electrical components having such features are identified by the international hazard symbols

on the schematic diagram and the parts list. Before replacing any of these components, read the parts list in this manual carefully.

The use of substitute replacement parts which do not have the same safety as specified in the parts list may create electrical shock,

fire, or other hazards.

SAFETY INSTRUCTION

WARNING: The metal edges of the LCD module are sharp,handle it with care.

The LCD module can easily be damaged during disassembly or reassembly; therefore, always observe the following precautionswhen handling the module.

1. In the event that the screen is damaged or the liquid crystal (fluid) leaks, do not breathe in, drink, or touch this fluid. Suchactions could cause toxicity or skin irritation. If this fluid should enter the mouth, rinse the mouth thoroughly with water. If the

22



4/32

fluid should contact the skin or clothing, wipe off with alcohol, etc., and rinse thoroughly with water. If the fluid should enterthe eyes, immediately rinse the eyes thoroughly with running water.

2. When attaching the LCD module to the LCD cover, position it appropriately and fasten at the position where the display canbe viewed most conveniently.

3. Carefully align the holes at all four corners of the LCD module with the corresponding holes in the LCD cover and fastenwith screws. Do not strongly push on the module because any impact can adversely affect the performance. Also usecaution when handling the polarized screen because it can easily be damaged.

4. If the panel surface becomes soiled, wipe with cotton or a soft cloth. If this does not remove the soiling, breathe on thesurface and then wipe again. If the panel surface is extremely soiled, wipe the panel surface with CRT cleaner sprayedonto the cloth. Do not spray the cleaner on the panel. Pay attention not to scratch the panel surface.

5. Leaving water or other fluids on the panel for an extended period of time can result in discoloration or stripes. Immediatelyremove any type of fluid from the screen.

6. Glass is used in the panel construction. Damage can occur if dropped or struck with hard objects.

33



5/32

7. CMOS-LSI circuitry is used in the LCD module, so avoid damage due to static electricity. When handling the module, use awrist ground or anchor ground.

8. Do not expose the LCD module to direct sunlight or strong ultraviolet rays for extended periods.

9. Do not store the LCD module below the temperature conditions described in the specifications. Doing so could result infreezing of the liquid crystal, loss of resilience, or other damage.

10. Do not disassemble the LCD module. Such actions could result in improper operation.

11. When transporting the LCD module, do not use packing containing epoxy resin (amine) or silicon resin (alcohol or oxim).The gas generated by these materials can cause loss of polarity.

44



6/32

Entering Service Mode

1. Set VOLUME to minimum and press MUTE button twice on the remotecontrol.

2. Press MUTE button again and hold button down.

Service Mode display

3. While holding the MUTE button, press MENU button on TV set.

Selecting the Adjusting Item

Every pressing of CH or button in the service mode changes the adjustment items.

Adjusting the Data

Pressing of VOLUME or button will change the value of data in the range from 00H to FFH. The variable range depends onthe adjusting item.

Exiting Service Mode

Press the POWER button once to turn off the TV.

55



7/32

LV67

YELLOW GREEN

MODE LED LED

POWER OFF

POWER OFF (Standby

POWER ONDisk in the disk slot

Fan Stop Detection Blinking

IIC BUS Error Slow Blinking

Power Protection Detection Fast Blinking

Booting 3 Blinks

Upgrade in progress

Upgrade successful

Upgrade failed

LED Indication

The yellow, blue and red/green LED lights on the TV (at the bottom center of the TV)

indicate the TV's status, as described below:

Note:If the TV loses A/C power (e.g., a power outage occurs or the power cord is

unplugged), when power is restored, the yellow LED will blink while the TV is booting

until the remote control is usable. This is normal and is not a sign of malfunction.

66



8/32

A

Sound

Is

Sound Missing or

Distorted?

MissingDistorted

Is Missing

Sound Analog

or Digital?

Is

Distorted Sound

Analog or Digital?

Analog DigitalDigital

Replace AnalogSignal Processing

Section.

Replace Digital Signal

Processing Section, then

suspect Analog.

Questions or Statements in flow chart

pertain to only the defined areas. It is

assumed that all other inputs and

functions operate correctly.

Reconfirm

proper

operation of all

analog audiosources.

Cable Card is a function of Digital

Signal Processing Area

Analog Processing includes:

Composite Video/Audio

S-Video/AudioNTSC Tuner Video/Audio

Digital Audio after Digital Processing

Color stream Video/Audio

DVI/Computer Audio In

Digital Processing includes:

RGB Computer Video

HDMI

ATSC (8Vsb) HD

Tuner Signals

Ethernet

77



9/32

B

Picture

Is

the PictureMissing or

Distorted?

MissingDistorted

Is the

Missing

Picture Analog or

Digital?

Is Distorted

Picture Analog or

Digital?

Analog DigitalDigital

Replace Analog Signal

Processing Section, thensuspect Digital.

Replace DigitalSignal Processing

Section.

Replace DigitalSignal

Processing

Section.










RGB Computer Video

HDMI

ATSC (8Vsb) HD

Tuner Signals

Ethernet





88



10/32

Dead

C

Are

any LEDs

Blinking on the

front of the

unit?

No Yes

Suspect Power Supply,

Low B Supply Then

Suspect system Control(SYSCON).

Use Blink Codesto

help determine

problem area.










RGB Computer Video

HDMI

ATSC (8Vsb) HD

Tuner Signals

Ethernet





99



11/32

Are

any problem

LED indications

exhibited after the

power button is

pressed?

No Yes

Does

3VDC appear at pin 3of P806A when on-off is

pressed?

No

YesIs

5VDC present at pin 1

of P806A when the unit

is plugged in?

No

Is

18 VDC present at pin 7

of P806A when the unit

is plugged in?

NoYes

Suspect the

Low B supply

circuit.

Is


of P811A with the unit

plugged in?

NoYes

Suspect the Low B

supply, then the main

power supply circuit.

Suspect the

system

control

(SYSCON)

circuit.

Yes

Use

the LED bl

chart to he

locate th

problem

Suspect the

main power

supply circuit.

Dead set No

sound or picture

1010



12/32

Is the problem

associated with an

analog or digital

input?

Analog Digital

Is the on screen display

normal?

NOYES

Using the

power distribution

diagram, are the

voltages normal at

CN90B and

CN91B?

NO

Suspect th

Low B

module.

YES

Suspect the

Seine (Digital)

module.Using

the power

distribution diagram,

are the voltages normal

at P811A and

P811B?

Suspect the AV tuning module.

This can be confirmed by using the

wiring interconnect diagram and

checking the Y, Pb, Pr signals at

plug CN72A.

YES

Suspect the

Low B

module.

NO

No or distorted

video

Does

the back light function

normally when the unit

is turned on?

YESNO

Is

the screen discolored

or does it have streaks

or dark areas with nosignal input?

NO

Replace the

LCD display

panel.

YES

Examples

1111



13/32

Does the back light

function and then turn

off?

YESNO

Replace the

LCD display.

Is

24 VDC present

at pins 1 and 5 of P804

when the unit is

turned

on?

YESNO

Replace the

Main Power

supply.Is


of CN91A when the unit

is turned on?

NO

YES

Replace the

Low B power

supply.

Is

3.3 VDC present at

pin 7 of P812A shortly

after the unit is turned

on?

YES

Replace the

SYSCON

section.

NO

1212



14/32

Is

problem associated

with analog or digital

inputs?

NO YES

AnalogDigital

Suspect the

Tuner

module.

Using the power

distribution diagram,

are the voltages normal

at P812A and

P812B?

Suspect the

Low B

module.

Using

the power

distribution diagram, are

the voltages normal at

CN90A and

CN91B?

NOYES

Suspect the digital module. This

can be confirmed by using the wiring

interconnect diagram and an oscilloscope

and checking the right and left audio

signals at CN71.

No or distorted

Audio

1313



15/32

Does the back light

function and then turn

off?

YESNO

Is

the back light

supply source present

shortly after the power

switch is pressed?

(24V-Pins 1-5

CN804)

YESNO

Suspect the

back light

supply source.

Is the back

light switching

signal (3VDC Pin 1-

CN61) present shortly

after the power switch

is pressed?

YES

Suspect

System

Control or

Low-B supplyproblems.

NO

If it is available , try the

CCFL inverter. If this does

not help, replace the LCD

display. ***

*** Warranty Concession

required for LCD panel

replacement. Digital photo

may be requested.

Contact Technical

Support.

Does

the screen light

unevenly? (Normal

screen with a shaded

area)

NO

This

normally

indicates a

defective CCFL

(Lamp). The

display should

be replaced.

***

Using

a scope or frequencycounter, is the CCFL

inverter operating?

Suspect the

CCFL inverter.

NO YES

Operation of the inverter can

be determined by placing a

scope probe or frequency

counter test leadNEAR the

inverter. If the inverter is

operating, the operating

frequency (40 to 70 Khz) or

waveform pictured below will

be displayed.

Do not connect the

test leads directly to

the inverter!

YES

1414



16/32

LOW-B

U02A

AV-TERM

U03A

SIGNAL

U04A

POWER

U01A

LED

U03C

KEY

U03D

Front-AV

U03B

1515



17/32

1616



18/32

1717



19/32

1818



20/32

1919



21/32

2020



22/32

Stand Exploded View

A425 A426 A427 A428 A429

2121



23/32

ReplacementPartsList

Location Part No. Descript ion

A201 75006119 CESE/COVER/LIDFRONTBEZELASSY,FRONTBEZELASSY

A320 75005734 PIECE,CTRLSASSY

A401 75006120 CESE/COVER/LIDBACKCOVERASSY,BACKCOVERASSY

A420 75006553 LEGSTANDKITFIX

A425 75007239 LEGFIXBKTASSYFIX

A426 75007238 LEGBASEASSYFIXBB

A429 75007210 LEGSTANDWRENCH

B001 75006117 DISPLAY,LC420WX5

SLC1

C801 76503510 CAPACITOR,PLASTICFILM,LE224C

C802 76503510 CAPACITOR,PLASTICFILM,LE224C

C803 76092567 CAPACITOR,CERAMICDISC,AC250VE1000PFM




C810 76125037 CAPACITOR,ELECTROLYTIC,200V1200UFM



C812 76092281 CAPACITOR,CERAMICDISC,AC250VE4700PF


C814 76092281 CAPACITOR,CERAMIC

DISC,

AC250V

E4700PF



C8402 76109103 CAPACITOR,CERAMICCHIP,50VB0.01UFK

C8403 76109471 CAPACITOR,CERAMICCHIP,50VB470PFK

C8404 75004442 CAPACITOR,CERAMICCHIP,50VB1UFK


C860 76214103 CAPACITOR,CERAMICDISC,500VB0.01UFK

C8601 75004442 CAPACITOR,CERAMICCHIP,50VB1UFK

C8602 75005709 CAPACITOR,CHIPCERA,50VB0.47UFK,GRM21BB31H474KA87L



C8605 76105101 CAPACITOR,CERAMICCHIP,50VCH100PFJ


C861 76678229 CAPACITOR,ELECTROLYTIC,200V2.2UFM

C863 76092349 CAPACITOR,CERAMICDISC,2KVR2200PFK

C864 76503439 CAPACITOR,PLASTICFILMCQ92T630V180000PFJ

C8640 76435221 CAPACITOR,CERAMICDISC,500VSL220PFJ

C866 76435221 CAPACITOR,CERAMICDISC,500VSL220PFJ





C8702 76287224 CAPACITOR,CERAMICCHIP,50VF0.22UFZ,GRM319F11H224ZA01D


C872 76073189 CAPACITOR,ELECTROLYTIC,

35V

1000UF

M


C880 76503253 CAPACITOR,PLASTICFILM,1250VH0.01UFH

C8802 75005709 CAPACITOR,CHIPCERA,50VB0.47UFK,GRM21BB31H474KA87L





C881 76092337 CAPACITOR,CERAMICDISC,2KV220PFK

C882 76092339 CAPACITOR,CERAMICDISC,2KV330PFK

22



24/32










CE01 76092179 CAPACITOR,CERAMICCHIP,25VB0.22UFK


CE10 75005708 CAPACITOR,CHIPCERA,50VB0.33UFK,C2012JB1H334KT


CE12 76794101 CAPACITOR,ELECTROLYTIC,16V100UFM


CE17 76664101 CAPACITOR,ELECTROLYTIC,6.3V100UFM



CE50 76109102 CAPACITOR,CERAMICCHIP,50VB1000PFK

CE51 76092538 CAPACITOR,CERAMICCHIP,10VF1UFZ


CE70 76073186 CAPACITOR,ELECTROLYTIC,

35V

470UF

M


CE72 76567474 CAPACITOR,PLASTICFILM,50V0.47UFJ








CE930 75005709 CAPACITOR,CHIPCERA,50VB0.47UFK,GRM21BB31H474KA87L





CN90A 23713756 PLUG,5P2.5MMG,B5BEHF1TV4

CN90B 23713760 PLUG,NP2.5MMG,B9BEHF1A

D801 76019489 VARISTOR,V1=470V2750A/2

D810 23362200 DIODE,D5SB60,7009F07

D811 23362204 DIODE,D3SB60,7109F08

D812 23357511 DIODE,AG01A

D813 23357511 DIODE,AG01A

D831 23357697 DIODE,1SS133

D840 75005719 DIODE,D1NS45060

D860 23357850 DIODE,ZENER,MTZJ9.1A

D861 23357893 DIODE,ZENER,

MTZJ27C

D8610 23357854 DIODE,ZENER,MTZJ10B

D862 23357893 DIODE,ZENER,MTZJ27C


D864 23357513 DIODE,EU2A

D865 23357853 DIODE,ZENER,MTZJ10A

D866 23357512 DIODE,AL01Z

D867 23357512 DIODE,AL01Z

D870 75002164 DIODE,FMEN220A(LF023108)

D871 75002164 DIODE,FMEN220A(LF023108)

23



25/32



D872 75002164 DIODE,FMEN220A(LF023108)

D873 23357512 DIODE,AL01Z

D874 23357512 DIODE,AL01Z

D880 23357709 DIODE,RU1P


D882 23357512 DIODE,AL01Z



D885 23357842 DIODE,ZENER,MTZJ6.8B

D886 23357512 DIODE,AL01Z

D888 23357512 DIODE,AL01Z

D889 23357512 DIODE,AL01Z


D891 23357104 DIODE,1SS244

D892 23357366 DIODE,FR105B5

D893 23357366 DIODE,FR105B5

D894 23357408 DIODE,FMX12S(023108)

D895 23362197 DIODE,SCHOTTKY,RB085T60

D896 23357408 DIODE,FMX12S(023108)

DE01 23357800 DIODE,ZENER,

MA8300

H

DE02 23357703 DIODE,1SS355

DE10 23357866 DIODE,ZENER,MTZJ12C

DE31 23357862 DIODE,ZENER,MTZJ11B





DE42 23357703 DIODE,1SS355

DE43 23357515 DIODE,RK34

DE60 23357842 DIODE,ZENER,MTZJ6.8B

DE70 23357810 DIODE,FMBG14L

DE90 23357515 DIODE,RK34


F801 23144319 FUSE,CARTRIDGE5.2X20,125V8A

F801A 23165433 FUSEHOLDER,5.2

F801B 23165433 FUSEHOLDER,5.2

F860 23144381 FUSE,RADIALLEADSUBMINIATUR250V4A



F882 75005714 FUSE,AXIAL,CCV125V1A(EM)FC1506

F883 75005791 FUSE,RADIAL,5RT5A



GR70 76000576 CHIPJUMPER,3216TYPE

K902 75005729 REMOCONHAND

UNIT,

CT

90275

L801 75006115 TRANSFORMERCHOKE2.4MHK5.0A,STH0130

L802 75006115 TRANSFORMERCHOKE2.4MHK5.0A,STH0130

L841 23289040 COIL,PEAKING,TRF4229AU

L842 23289983 COIL,PEAKING,TRF4101AZ

L843 23289049 COIL,PEAKING,TRF4330AU

L860 23103320 COIL,CHOKE,TEM2011


L870 23248489 COIL,CHOKE,TLN3639AH


24



26/32




L874 23103304 FERRITECHOKE,TEM2011AA




L880 23103330 FERRITECHOKE,3.5X5X2,TEM2014AH


LE70 23289979 COIL,PEAKING,TRF4100AZ

LE71 75004061 COIL,CHOKE,EI2456MMHK4.8A,EI2456001

LE72 23248417 COIL,CHOKE,TLN3481AH


LE90 75006065 COILCHOKE47MMHM1.8A,RCR1010NP470M

LE91 23289980 COIL,PEAKING,TRF4220AZ



MZ01 75006118 WIREHARNESSLVDS,V90A00029800

P800 23713702 PLUG,2P11.88MMWVT

P801 75002678 POWERCORD,INQ2682(1)

P803A 23713757 PLUG,6P2.5MMG,B6BEHF1TV4

P803B 23713757 PLUG,6P

2.5MM

G,

B6B

EH

F1

TV4

P804 23713942 CONNECTOR,10P,B10BPHKS(LF)

P805 23713942 CONNECTOR,10P,B10BPHKS(LF)

P806A 23713759 PLUG,8P2.5MMG,B8BEHF1TV4

P806B 23713759 PLUG,8P2.5MMG,B8BEHF1TV4

P811A 23713816 SOCKET,127301113K2

P812A 23713817 SOCKET,127301115K2

PG02 23165495 EARTHTERMINAL,MET310332



Q831 23205463 TRANSISTOR,2SC2712Y(TE85L,F)

Q832 23205463 TRANSISTOR,2SC2712Y(TE85L,F)

Q840 75005723 IC,MP1591DSLFZ

Q860 75001883 IC,STRZ4569

Q861 23000823 IC,PHOTOCOUPLER,TLP421F(GR)

Q870 23085587 IC,TA76431S

Q880 23135089 IC,STRW6756

Q881 23000823 IC,PHOTOCOUPLER,TLP421F(GR)

Q882 23085587 IC,TA76431S

QE01 23085415 IC,BD4746G

QE02 23085415 IC,BD4746G

QE03 23205327 TRANSISTOR,RN1406(F)

QE10 23085423 IC,KIA7809APIU/P

QE15 75005726 IC,PQ070XF01SZH

QE30 23205568 TRANSISTOR,2SA1163GR(TE85L,F

QE31 23205569 TRANSISTOR,2SC2713

GR(TE85L,

F

QE40 23205292 TRANSISTOR,2SD2396


QE51 23205463 TRANSISTOR,2SC2712Y(TE85L,F)

QE52 23205463 TRANSISTOR,2SC2712Y(TE85L,F)

QE53 23205443 TRANSISTOR,2SA1162Y(F)

QE54 23205567 TRANSISTOR,RN2403(TE85L,F)


QE70 75004079 IC,SI8008HFE


25



27/32




QE90 75006069 IC,SI8001FFE

QE91 23205313 TRANSISTOR,2SC1815Y(F)

QE92 23205339 TRANSISTOR,2SC2655Y(F)


QE94 75001876 TRANSISTOR,TPC8111(TE12L,Q)


QE96 75001876 TRANSISTOR,TPC8111(TE12L,Q)


R801 76043006 RESISTOR,CARBONFILM,1/2W2.2MOHMJ

R802 76004718 RESISTOR,METALGLAZE,1/2W8.2MOHMJ

R810 76554103 RESISTOR,OXIDEMETALFILM,2W10KOHMJ


R831 76011103 RESISTOR,CHIP,1/20W10KOHMJ

R832 76011471 RESISTOR,CHIP,1/20W470OHMJ

R833 76011472 RESISTOR,CHIP,1/20W4.7KOHMJ


R8402 76000595 RESISTOR,CHIP,1/16W15KOHMF

R8403 76000445 CHIPJUMPER,1608TYPE

R8404 76000598 RESISTOR,CHIP,

1/16W

47K

OHM

F



R860 76000250 RESISTOR,METALFILM,1/4W56KOHMF

R861 76000529 RESIST0R,METALFILM,1/4W6.8KOHMF



R863 76552100 RESISTOR,OXIDEMETALFILM,1/2W10OHMJ







R869 76553470 RESISTOR,OXIDEMETALFILM,1W47OHMJ





R875 75006062 RESISTOR,CR1/16153DV

R876 75004055 RESISTOR,CR1/16152DV





R8802 76011102 RESISTOR,CHIP,

1/20W

1K

OHM

J




R8807 75006056 RESISTOR,CR1/16821DV

R8808 75006060 RESISTOR,CR1/16103DV

R8809 75006059 RESISTOR,CR1/16682DV

R882 76366102 RESISTOR,CARBONFILM,1/6W1KOHMJ

R883 76366363 RESISTOR,CARBONFILM,1/6W36KOHMJ

R884 76552152 RESISTOR,OXIDEMETALFILM,1/2W1.5KOHMJ

26



28/32



R885 75005706 RESISTOR,RGC20.22OHMJ


RE01 76190013 RESISTOR,CHIP,1/16W22KOHMF

RE02 76011221 RESISTOR,CHIP,1/20W220OHMJ

RE03 76019386 RESISTOR,CHIP,1/16W5.6KOHMF

RE04 76011223 RESISTOR,CHIP,1/20W22KOHMJ





RE15 75004056 RESISTOR,CR1/16222DV





RE32 76553122 RESISTOR,OXIDEMETALFILM,1W1.2KOHMJ



RE40 76552391 RESISTOR,OXIDEMETALFILM,1/2W390OHMJ

RE41 76553152 RESISTOR,OXIDE

METAL

FILM,

1W

1.5K

OHM

J






RE541 76000445 CHIPJUMPER,1608TYPE






RE70 76366470 RESISTOR,CARBONFILM,1/6W47OHMJ

RE71 76000151 RESISTOR,METALFILM,1/4W750OHMF


RE73 76000368 RESISTOR,METALFILM,1/4W2.7KOHMF

RE90 76000530 RESISTOR,METALFILM1/4W7.5KF

RE91 76000147 RESISTOR,METALFILM,1/4W470OHMF


RE94 76553680 RESISTOR,OXIDEMETALFILM,1W68OHMJ




RE96 76366473 RESISTOR,CARBONFILM,1/6W47KOHMJ

RE960 76011222 RESISTOR,CHIP,1/20W2.2KOHMJ

RE961 76011562 RESISTOR,CHIP,

1/20W

5.6K

OHM

J

RE97 76366472 RESISTOR,CARBONFILM,1/6W4.7KOHMJ

RE98 76366473 RESISTOR,CARBONFILM,1/6W47KOHMJ


SR80 23146597 RELAY,DC5V0.25W,DG5D1O(M)2

T801 75006116 FILTERL/F9MH5.0A,TF3022HA902Y5R002

T802 75006116 FILTERL/F9MH5.0A,TF3022HA902Y5R002

T860 75006066 TRANSFORMER,ST3496

T861 75006066 TRANSFORMER,ST3496

T880 23217840 TRANSFORMER,CONVERTER,TPW3585AD

27



29/32



U01A 75006107 PWU,POWER,PE0306D1

U02A 75006108 PWU,LOWB,PE0307D1

U03A 75006083 PWU,TN_AV,PE0248C1

U03B 75006110 PWU,FAV,PE0248C2

U03C 75006111 PWU,LED/IR_PASS,PE0248C3

U03D 75006112 PWU,KEY,PE0248C4

U04AS 75006509 PCBOARDASSY,PE0249A1,SEINE

W661 75005717 SPEAKERASSY,SPK1493AO,60X1208OHM10W

28



30/32


29



31/32


30



32/32

TOSHIBA CORPORATION1-1, SHIBAURA 1-CHOME, MINATO-KU, TOKYO 105-8001, JAPAN

toshiba lcd tv service manual

Documents