T T O O R R R R S S E E R R I I E E S S PRESSURE REGULATOR FOR H SINGLESTAGE SERIES LINEUSE ・ ・ Features ・The regulators are 100% assembled in the clean r μm class 1000. ・Helium leakage testin g is carried out on 100% of regulators ・For standard flow rate. ・Nominal flow: 300L/min(nor) at P1=1.5MPa and P2= ・ ・ Specifications ・ Operating Parameters Maximum Inlet Pressure 5.0MPa Maximum Outlet Pressure 0.99MPa Flow Coefficient Cv=0.24 Te mperature -5~40 ℃ ・ Other Parameters Threaded 3ports Type : TORR -30 -3S -A010 -4SH4SH ・ Materials Welded 2ports Type : TORR -30 -2W -A015 -4VF4VF Inlet & Outlet Body Port Threaded Type : Female NPT1/4 Type Welded Type : Face seal connector Threaded Type : Swagelok Inlet & Outlet Connector Size 1/4 ” or 3/8 ” Surface Finished BA : Ra ≦ 0.8 μm EP : Ra ≦ 0.25 μm Leak rate Threaded Type : less than 1.3 ×10 -9 Pa.m 3 /sec Welded Type : less than1.3 ×10 -10 Pa.m 3 /sec Weight Welded Type : 3port/1.3 kg,2port/1.1kg Body SUS316L Other Wetted Parts SUS316, SUS316L, PTFE, PCTFE Bonnet C3604 Adjusting handle ABS resin, C3604
2
Embed
TORR SERIES PRESSURE REGULATOR FOR HIGH … · torr series pressure regulator for high purity gas ...
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
TTOORRRR SSEERRIIEESS PRESSURE REGULATOR FOR HIGH PURITY GAS
SSIINNGGLLEE SSTTAAGGEE
SSEERRIIEESS LLIINNEE UUSSEE
・・・ Features ・The regulators are 100% assembled in the clean rooms of 0.3μm class 1000. ・Helium leakage testing is carried out on 100% of regulators. ・For standard flow rate. ・Nominal flow: 300L/min(nor) at P1=1.5MPa and P2=0.6MPa.
・・・ Specifications
・・ Operating Parameters
Maximum Inlet Pressure 5.0MPa
Maximum Outlet Pressure 0.99MPa
Flow Coefficient Cv=0.24
Temperature -5~40℃
・・ Other Parameters
Threaded 3ports Type : TORR-30-3S-A010-4SH4SH
・・ Materials
Welded 2ports Type : TORR-30-2W-A015-4VF4VF
Inlet & Outlet Body Port Threaded Type : Female NPT1/4
Type Welded Type : Face seal connector Threaded Type : Swagelok
Inlet & Outlet
Connector Size 1/4” or 3/8”
Surface Finished BA : Ra ≦ 0.8 μm EP : Ra ≦ 0.25μm
Leak rate
Threaded Type : less than 1.3×10-9Pa.m3/sec
Welded Type : less than1.3×10-10Pa.m3/sec
Weight Welded Type : 3port/1.3 kg,2port/1.1kg
Body SUS316L
Other Wetted Parts SUS316, SUS316L, PTFE, PCTFE
Bonnet C3604
Adjusting handle ABS resin, C3604
SD0127rev3 2004.1
・・・ Products
・・・ Flow rate
・ Refer to flow characteristic curve. → ・ We recommend to use left area of standard- flow line.
・・・ Dimensions
For welded 1/4”
face seal type mm For threaded 1/4”Swagelock type (112) mm For other type, please refer to us.
CAUTION : Before using, please read instruction manual.