This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
18" x 24" Poly BasinManufactured using the highest grade of polyethyleneresin to assure years of trouble-free performance.(24 U.S. Gallon Capacity)
18" x 22" Poly BasinExceptionally high impact-resistant with a variety of cover options. (22 U.S. Gallon Capacity)
14" x 24" Poly BasinDesigned for the long-term reliability with extremeeconomy in mind. (15 U.S. Gallon Capacity)
13" x 13" Recessed Rolled Top Sink Tray SystemThe Recessed Roll Top provides a neat and clean appearance for under the bar or in the open. Includes standard 1!" vent and discharge “ringer” grommets.(7 U.S. Gallon Capacity)
13" x 13" Sink Tray SystemDesigned for laundry trays, wet bars, dehumidifiers, watersofteners, and capturing air conditioner condensation.Includes a 1!" threaded “spin-weld” vent and a 1! “spin-weld” discharge sleeve.(7 U.S. Gallon Capacity)
12" x 14" x 16" Rectangular Sump Box systemPerfect for larger capacity needs of commercial applications such as restaurants, cocktail lounges and other related areas. Includes vent and discharge “ringer”grommets. (11 U.S. Gallon Capacity)
Distributed By: Aqua Technology Group24/7 Sales and Support 800-513-8993www.aquatechnologygroup.com
18" x 30" Poly BasinDesigned for new construction and retrofit applications.(30 U.S. Gallon Capacity)
24" x 24" Poly BasinOffers years of trouble free performance.(43 U.S. Gallon Capacity)
24" x 30" Poly BasinUsing the highest grade of polyethylene for long-termreliability. (54 U.S. Gallon Capacity)
24" x 36" Poly BasinExceptionally high-impact resistant with an increasedgallon capacity. (65 U.S. Gallon Capacity)
18" x 22" Side-Vent Poly BasinSide-Vent design was developed with one issue in mind, that of ease of maintenance.(22 U.S. Gallon Capacity) 2" or 3" vent.
18" x 30" Side-Vent Poly BasinDue to the vent pipe remaining intact, gone are the days of cutting and then repairing the vent pipe for achieving regular pump maintenance. (30 U.S. Gallon Capacity) 2" or 3" vent.
23" x 31" Side-Vent Poly Basin50% more volume than the industry standard 18" x 30" basin. (65 U.S. Gallon Capacity) 2" or 3" vent.
Distributed By: Aqua Technology Group24/7 Sales and Support 800-513-8993www.aquatechnologygroup.com
! Includes hardware pack (bolts, washers & gasket tape) " Includes hardware pack, discharge, vent & ECG
18" x 22" Recessed Rolled Top BasinDesign features include encapsulated threaded coverbolt inserts and a recessed rolled top preventing debrisfrom entering basin during installation.(22 U.S. Gallon Capacity)
18" x 30" Rolled Top Poly BasinRolled top design dramatically reduces service time for pump maintenance. (30 U.S. Gallon Capacity)
30" x 36" Rolled Top Poly BasinExtra-high roll top helps prevent debris from entering basin during installation. (103 U.S. Gallon Capacity)
36" x 36" Rolled Top Poly BasinDesigned for simplex and duplex applications.(154 U.S. Gallon Capacity)
18" x 24" Recessed Rolled Top BasinThe recessed rolled top allows covers to fit flush.(24 U.S. Gallon Capacity)
18" x 30" Recessed Rolled Top BasinOur most popular recessed rolled top basin offeringyears of trouble-free performance.(30 U.S. Gallon Capacity)
Distributed By: Aqua Technology Group24/7 Sales and Support 800-513-8993www.aquatechnologygroup.com
18" x 6" Poly Extension SHDB1806E $52.0018" x 12" Poly Extension SHDB1812E $63.00
! Includes hardware pack (bolts, washers & gasket tape) " Includes hardware pack, discharge, vent & ECG
24" x 36" Recessed Rolled Top BasinExtra-high recessed rolled top helps prevent debris from entering basin during installation.(65 U.S. Gallon Capacity)
24" x 24" Recessed Rolled Top BasinRecessed rolled top flange offers extra strength and ease of installation. (43 U.S. Gallon Capacity)
24" x 30" Recessed Rolled Top BasinManufactured using the highest grade of polyethyleneto assure years of trouble-free performance.(54 U.S. Gallon Capacity)
18" x 30" Recessed Rolled Top Basin with Torque Stop
Innovative design features include a 4" molded inlet hub or standard inlet options in the same basin. Comes completewith 1/8" pump stabilizing torque stop.(30 U.S. Gallon Capacity)
Super Blue Polyethylene BasinsTwice the thickness – twice the weight
Our flagship poly basin – more durable than structural foam and easier to work with than fiberglass.
Super Blue Poly Extensions
Distributed By: Aqua Technology Group24/7 Sales and Support 800-513-8993www.aquatechnologygroup.com
! Includes hardware pack (bolts, washers & gasket tape) " Includes hardware pack, discharge, vent & ECG
18" x 22" Structural Foam BasinThe M2 structural foam basin is true to its dimensions and offers an increase of 2.75 gallons over the competition’s 18" x 22". (22 U.S. Gallon Capacity)
18" x 30" Structural Foam BasinIncreased volume capacity over our competitors, means less cycling time for your pump, increasing pump life and decreasing operating cost.(30 U.S. Gallon Capacity)
18" x 24" Corrugated Tapered Wall BasinUnique “TOPP-LOCK” cover design makes every installation a breeze. (26 U.S. Gallon Capacity)
18" x 30" Corrugated Tapered Wall BasinWall thickness is .100" (approx.) thicker than the competition,which provides long-term reliability. (34 U.S. Gallon Capacity)
Structural Foam Anti-float RingAttaches securely and easily to your Topp Structural Foam basin to help provide a stable environment in high-water situations.
Distributed By: Aqua Technology Group24/7 Sales and Support 800-513-8993www.aquatechnologygroup.com
" Includes hardware pack, discharge, vent & ECG ! Includes hardware pack (bolts, washers & gasket tape)
18" x 22" Poly Elevator BasinEconomy elevator pit basin package designed for water run-off to help keep the environment safe. Cover provided with discharge flange and ECG. (22 U.S. Gallon capacity)
24" x 36" Poly Elevator BasinIncreased volume capacity on our 24" x 36" Elevator Basin increases pump performance.(24 U.S. Gallon capacity)
18" x 30" IAPMO Listed BasinIAPMO LISTED – "" thick Wall Sewage Ejector Basin is provided with 2" Vent & Discharge Grommets, 16 S.S.bolts & washers and water & gas-tight cover gasket material to withstand a 10-foot stack test.
18" Recessed Roll Top Poly ExtensionsQuickly increase your basin height and help prevent debris from entering basin during installation.
24" Recessed Roll Top Poly ExtensionsProvide a flush surface when you assemble the cover andincrease your basin height with ease.
18" x 39" Poly Triple Garage SystemDesigned to help garage areas and other facilities handle volatile wastes that they generate. Separates volatile wastes as they pass through the system of bafflesand rise to the surface. (Meeting IL code). Includes threeblack epoxy-coated 14g Solid Steel covers, Composite inlet hub and discharge.
Ultra-Poly BasinUnique design gives added support to a shallowclearance, high capacity Poly Basin. Compatible withall our 18" covers. Heavy duty version available.
Distributed By: Aqua Technology Group24/7 Sales and Support 800-513-8993www.aquatechnologygroup.com
SumpMasterFully-automatic auxiliary power source for residential floodcontrol. Designed with the homeowner in mind. Installs inminutes with no modifications or piping changes. TheSUMPMASTER will power your existing sump pump in anoutage. Engineered to work with any new or existing 115Vsump pump up to 1/2 H.P. The SUMPMASTER takes D.C.battery power and converts it to 115 VAC power (whenstandard power fails or is not available).
High Water AlarmsThis alarm is constructed of a non-metallic enclosure andsafe 9-volt operation through use of a 120 volt-to-9 volttransformer. Quick push tab connectors allow time savingfloat switch installation. The power monitor lamp will go outif power to the system fails also sounding the 85db solidtone to alert you to the problem. Metallic enclosure isdesigned for sump & sewage basins, septic tanks, dosing, &storage tanks. Quick push tab connectors allow time saving float switch installation. Supplied with mini 15 ft. float,additional 5 ft. lengths available. UL & CUL Listed.
Solvent Weld PVC Check ValveFull flow design. No metallic parts, corrosion resistant.Angle seat and weighted flapper design for low pressureseal. Ideal for close working areas, easy pipe alignment.Designed for both horizontal and vertical usage.
Rubber Sleeve Full Flow Swing Check ValvesFull flow check valves were engineered to increase performance and for installation ease.
Compression Nut PVC Swing Check ValvesEasy installation and removal with compression seal connections.
Two-Piece Simplex Structural Foam CoverDurable, corrosion-resistant cover providing a quicker access to your pump.
Two-Piece Simplex Steel CoverProvides a quicker access to your pump, as you never cut your vent pipe with this epoxy-coated cover.
Simplex Steel Cover with Access PlateThe 4-bolt pump access plate offers ease in the basin for pump installation and removal. Blank inspection plateprovides quicker access for pump inspection.
Duplex Steel Covers with Access PlatesIncludes two pump access plates to aid pump installationand removal. Blank inspection plate provides quicker accessfor pump inspection.
" Includes hardware pack, discharge, vent & ECG
Distributed By: Aqua Technology Group24/7 Sales and Support 800-513-8993www.aquatechnologygroup.com
Generic Pump Configuration for 18" x 30" Basins TS1830 $17.25
Pipe seal for 4" piping through a 5" hole H400R $9.00Pipe Seal for 4" SRD 35 piping through a 5" hole H400R35 $12.50
Pipe seal for 4" piping H400MTH $13.75
4" Fiberglass Hub for 4" Piping H401FG $22.00Flat-back Fiberglass Hub for 4" Piping H400FGFLAT $22.00
Curved Back Cast Iron Hub for 2" Piping H200C $50.00Curved Back Cast Iron Hub for 3" Piping H300C $50.00Curved Back Cast Iron Hub for 4" Piping H400C $50.00Curved Back Cast Iron Hub for 4" Piping on 18" Basins H400C-18 $50.00Flat Back Cast Iron Hub for 4" Piping H400F $50.00For 1"" Piping (OD) Through 3" Hole G125 $4.25For 1!" Piping (OD) Through 3" Hole G150 $4.50For 2" Piping (OD) Through 3" Hole G200 $4.75For 3" Piping (OD) Through 4" Hole G300 $6.00For 4" Piping (OD) Through 5" Hole G400 $6.75For SDR35 4" Piping (OD) Through 5" Hole G400SDR35 $6.75Electric Cord Grommet, Seals up to 3 Cords
(up to 3/8" OD) Through a 2!" Hole ECG $3.50
Electric Cord Grommet, Through a 2" Hole ECG200 $3.50Blank Snap Plug for 3" Hole (for steel covers only) BSP300 $2.00
Multi-Tite HubA sure seal with Cast Iron Soil Pipe(service weight).
Composite HubsFiberglass composite bolt-on hubs.
Cast Iron Caulking Inlet HubsIndustrial enamel coated bolt-on cast iron inlet hubs.
“Ringer” Pipe GrommetsFor the quick, easy, and sure pipe seal.
Discharge PipesAdd this Sch40 or Sch80 dischargepipe to your order and provide a jobready pack.
Torque StopPrevents pump rotation and protectsthe basin bottom with this 1/8" drop-inpolyethylene torque stop.
Stop "N" Seal Inlet HubPipe seal for 4" piping. Your piping willpenetrate about 13/4" and stop. Stateof Illinois Approved.
2" Ball/Check Valve CombinationOne-piece ball/check valve combinationwith a true union design allows removalof check valve for cleaning or repairs.
Distributed By: Aqua Technology Group24/7 Sales and Support 800-513-8993www.aquatechnologygroup.com
Pipe Seal for 3/8" Piping Through 1" Hole U038 $3.50Pipe Seal for !" Piping Through 1"" Hole U050 $4.00Pipe Seal for #" Piping Through 1"" Hole U075 $4.00Pipe Seal for 1" Piping Through 1#" Hole U100 $4.50Pipe Seal for 1"" Piping Through 2" Hole U125 $4.75Pipe Seal for 1!" Piping Through 2!" Hole U150 $5.00Pipe Seal for 2" Piping Through 3" Hole U200 $6.50Pipe Seal for 2" Piping Through 3" Hole U200-35 $11.00Pipe Seal for 1"" Piping Tthrough 3" Hole U200-125 $13.50Pipe Seal for 1!" Piping Through 3" Hole U200-150 $12.50Pipe Seal for 3" Piping Through 4" Hole U300 $7.50Pipe Seal for 2" Piping Through 4" Hole U320 $29.00Pipe Seal for Piping with a 3.900" OD, Through 5" Hole U390 $19.00Pipe Seal for 4" Piping Through 5" Hole U400 $8.00Pipe Seal for 4" x SDR35 Piping Through 5" Hole U400-35 $18.00Pipe Seal for 3" Piping Through 5" Hole U430 $22.00Pipe Seal for Piping with a 4.900" OD, Through 5!" Hole U490 $18.00Pipe Seal for Piping with a 5.900" OD, Through 7" Hole U590 $33.00Pipe Seal for 6" Piping Through 7" Hole U600 $13.50Pipe Seal for 6" x SDR35 Piping Through 7" Hole U600-35 $22.00Electric Cord Grommet, Seals up to 3 Cords Through a 2" Hole UECG $4.50Plastic 2-Bolt Slip Flange, with O-Ring for 1"" Piping PF125S $11.00Plastic 2-Bolt Slip Flange, with O-Ring for 1!" Piping PF150S $11.00Blank Plastic Flange for 2" Hole PF200B $13.75Plastic 2-Bolt Slip Flange, with O-Ring for 2" Piping PF200S $13.75Plastic 2-Bolt Threaded Flange for 2" Piping PF200T $13.75Plastic 2-Bolt Slip Flange, with O-Ring for 3" Piping PF300S $15.50Plastic 2-Bolt Threaded Flange for 3" Piping PF300T $15.50
UnisealsA positive, mechanical pipe-to basinseal for flat or curved surfaces. Thetapered inner diameter forces theouter diameter to expand andsecurely seal the penetrating pipeor tubing without adhesive hard-ware, or threads. It will seal a flat orcurved surfaces even it the pene-trating pipe is at an angle as greatas 15 degrees.
Uniseals are made from Alcryn® atough, pliable thermoplastic devel-oped by DuPont. It has excellentresistance to most chemical com-pounds, petroleum products,methanol, and most soil. (Alcryn® istrademark of E.I. DuPont Co., Inc.)
Distributed By: Aqua Technology Group24/7 Sales and Support 800-513-8993www.aquatechnologygroup.com
11
Inspection Plates - !" Thick10" diameter for an 8" clear access opening.
Inspection Plates - 12 Gauge10" diameter for an 8" clear access opening.
Electric Cord GripsEasily adjust your power cord without entering the basin.
!" NPT, Seals Cords from 0.236" to 0.472" OD GRIP050 $11.00#" NPT, Seals Cords from 0.511" to 0.708" OD GRIP075 $11.001" NPT, Seals Cords from 0.236" to 1.024" OD GRIP100 $32.00
Inlet Baffle, 8" Wide x 4" Deep x 12" Long PIB12 $55.00Inlet Baffle, 8" Wide x 4" Deep x 18" Long PIB18 $66.00Inlet Baffle, 8" Wide x 4" Deep x 24" Long PIB24 $77.00Inlet Baffle, 8" Wide x 4" Deep x 36" Long PIB36 $99.00Inlet Baffle, 8" Wide x 4" Deep x 48" Long PIB48 $121.00
Foam Tape Seal - 1/8" x #" x 6' CGM06F $1.75Butyl Tape Seal - 3/8" x 15' CGM15B $20.50
for 18" Fiberglass Basins – 9 lbs. C18FSNST $75.00
"" Thick Perforated Elevator Cover – 22 lbs. C18ELE $143.00Non-Skid Solid Green Fiberglass Cover – 9 lbs. C18WFNST $60.00
Standard Round Coversfor 18" ID Basins
Manufactured to ASTM D3753,one-piece tanks as deep as 35 ft.TOPP fiberglass basins are made with thehighest quality material and testing standardscurrently in the market. Our chop-hoop filamentwound tanks are available in 18", 24", 30", 36",42", 48", 60", 72", 96" and 120". TOPP alsooffers Triple Garage Systems designed to helpgarage areas and other facilities handle thevolatile wastes they generate.
Basins, Covers & Extensions • Basins and extensions available in 18", 24", 30", 36", 42", 48", 60", 72", 96" and 120" inside diameters• Various one-piece lengths available up to 35 ft.• Consult our factory directly for depths longer than 35 ft.• Sealing kit included with covers and extensions• Extensions use the same manufacturing process as our fiberglass basins
Distributed By: Aqua Technology Group24/7 Sales and Support 800-513-8993www.aquatechnologygroup.com
13
CAPACITY FIBERGLASS WEIGHT BASIN WITH WEIGHT BASIN WITH WEIGHTIN U.S. BASIN U.S. FG ANTI-FLOAT U.S. STEEL ANTI-FLOAT U.S.
PART NO. GALLONS ONLY LBS ADD “F” TO PART NO. LBS. ADD “S” TO PART NO. LBS.
Stainless Steel Simplex Mounting Studs for a 24" ID Basin FPSS24 $263.00Stainless Steel Simplex Mounting Studs for a 30" ID Basin FPSS30 $284.00Stainless Steel Duplex Mounting Studs for a 30" ID Basin FPSD30 $338.00Stainless Steel Simplex Mounting Studs for a 36" ID Basin FPSS36 $322.00Stainless Steel Duplex Mounting Studs for a 36" ID Basin FPSD36 $375.00Stainless Steel Simplex Mounting Studs for a 42" ID Basin FPSS42 $402.00Stainless Steel Duplex Mounting Studs for a 42" ID Basin FPSD42 $482.00Stainless Steel Simplex Mounting Studs for a 48" ID Basin FPSS48 $482.00Stainless Steel Duplex Mounting Studs for a 48" ID Basin FPSD48 $509.00Stainless Steel Simplex Mounting Studs for a 60" ID Basin FPSS60 $857.00Stainless Steel Duplex Mounting Studs for a 60" ID Basin FPSD60 $910.00Stainless Steel Simplex Mounting Studs for a 72" ID Basin FPSS72 $1,445.00Stainless Steel Duplex Mounting Studs for a 72" ID Basin FPSD72 $1,499.004 x 4 x 4 Simplex Junction Box,
6 x 6 x 4 Duplex Junction Box, w/2" Hub, (4) !" and (2) #" Cord Grips JB6S $166.00
8 x 8 x 4 Duplex Junction Box, w/2" Hub, (6) !" and (2) #" Cord Grips JB8S $198.00
Mini-Bulb, Mercury, Normally Open w/20' Cable MMFLOAT-20 $59.00Mini-Bulb, Mercury, Normally Open w/30' Cable MMFLOAT-30 $70.00Mini-Bulb, Mercury, Normally Open w/40' Cable MMFLOAT-40 $81.00Mini-Bulb, Mercury, Normally Open w/50' Cable MMFLOAT-50 $91.00Mercury Bulb, Normally Open w/20' Cable MCFLOAT-20 $59.00Mercury Bulb, Normally Open w/30' Cable MCFLOAT-30 $70.00Mercury Bulb, Normally Open w/40' Cable MCFLOAT-40 $81.00Mercury Bulb, Normally Open w/50' Cable MCFLOAT-50 $91.00Mechanical Bulb, Normally Open w/20' Cable MEFLOAT-20 $59.00Mechanical Bulb, Normally Open w/30' Cable MEFLOAT-30 $70.00Mechanical Bulb, Normally Open w/40' Cable MEFLOAT-40 $81.00Mechanical Bulb, Normally Open w/50' Cable MEFLOAT-50 $91.00
$ Includes hardware pack (bolts, washers & gasket tape)
Pump Mounting StudsInstalled in your fiberglass basin, when ordered from Topp Industries, Inc.
Fiberglass Stud PlatesTo retrofit existing fiberglass orconcrete (mounted in fiberglassplate).
Junction Boxes
Mini-Bulb Mercury Floats
Mercury Floats
Mechanical Floats
Distributed By: Aqua Technology Group24/7 Sales and Support 800-513-8993www.aquatechnologygroup.com
24
PREMIUM FIBERGLASS BASINSVinyl Ester Premium Series
Topp Industries introduces Corrosion Resistant and High Temperature Fiberglass basins. Utilizing Vinyl Ester Resin, we can assist with engineering a specific tank for your chemical resistant and high temperature applications.
Topp Industries has on staff, experienced individuals to help determine your Vinyl Ester needs or help design a complete package station or custom application. Contact the Toppteam with the following information and we will be able toprovide the appropriate resin for your application.
• All chemicals to which the basin will be exposed• Normal operating concentrations of chemicals,
maximum and minimums (including trace amounts) • Operating temperature, include minimum and maximum
Call (800) 354-4534 for pricing and assistance.
Distributed By: Aqua Technology Group24/7 Sales and Support 800-513-8993www.aquatechnologygroup.com
Aluminum Inlet HubsSpecify the diameter of your basin.(Other sizes available upon request)
Distributed By: Aqua Technology Group24/7 Sales and Support 800-513-8993www.aquatechnologygroup.com
27
DESCRIPTION PART NO. PRICE
FIBERGLASS BASIN AND COVER ACCESSORIES
Flexible Boot Fitting for 1" Piping FB100 $85.00Flexible Boot Fitting for 1"" Piping FB125 $85.00Flexible Boot Fitting for 1!" Piping FB150 $85.00Flexible Boot Fitting for 2" Piping FB200 $85.00Flexible Boot Fitting for 3" Piping FB300 $95.00Flexible Boot Fitting for 4" Piping FB400 $125.00Flexible Boot Fitting for 6" Piping FB600 $215.00Flexible Coupling for 4" x 2" Piping 1056-42 $25.00Flexible Coupling for 6" x 4" Piping 1056-64 $43.00Flexible Coupling for 8" x 6" Piping 1056-86 $68.00Flexible Coupling for 10" x 8" Piping 1056-10-8 $93.00Plastic 2-Bolt Slip Flange, w/O-ring for 1"" Piping PF125S $11.00Plastic 2-Bolt Slip Flange, w/O-ring for 1!" Piping PF150S $11.00Blank Plastic Flange for 2" Hole PF200B $14.00Plastic 2-Bolt Slip Flange, w/O-ring for 2" Piping PF200S $14.00Plastic 2-Bolt Threaded Flange for 2" Piping PF200T $14.00Plastic 2-Bolt Slip Flange, w/O-ring for 3" Piping PF300S $15.50Plastic 2-Bolt Threaded Flange for 3" Piping PF300T $15.50Cast Iron 2-Bolt Slip Flange, w/O-ring for 3" Piping CF300S $44.00Cast Iron 2-Bolt Threaded Flange for 3" Piping CF300T $44.00Cast Iron 2-Bolt Slip Flange, w/O-ring for 4" Piping CF400S $47.00Cast Iron 2-Bolt Threaded Flange for 4" Piping CF400T $47.00For 1"" Piping (OD) Through 3" Hole G125 $4.25For 1!" Piping (OD) Through 3" Hole G150 $4.50For 2" Piping (OD) Through 3" Hole G200 $4.75For 3" Piping (OD) Through 4" Hole G300 $6.00For 4" Piping (OD) Through 5" Hole G400 $6.75For SDR35 4" Piping (OD) Through 5" Hole G400SDR35 $6.75Electric Cord Grommet, Seals up to 3 Cords (up to 3/8" OD)
Through a 2!" Hole ECG $3.50Electric Cord Grommet Through a 2" Hole ECG200 $3.50Blank Snap Plug for 3" Hole (for steel covers only) BSP300 $2.00Pipe Seal for 3/8" Piping Through 1" Hole U038 $3.50Pipe Seal for !" Piping Through 1"" Hole U050 $4.00Pipe Seal for #" Piping Through 1"" Hole U075 $4.00Pipe Seal for 1" Piping Through 1#" Hole U100 $4.50Pipe Seal for 1"" Piping Through 2" Hole U125 $4.75Pipe Seal for 1!" Piping Through 2!" Hole U150 $5.00Pipe Seal for 2" Piping Through 3" Hole U200 $6.50Pipe Seal for 2" Piping Through 3" Hole U200-35 $11.00Pipe Seal for 1"" Piping Through 3" Hole U200-125 $13.50Pipe Seal for 1!" Piping Through 3" Hole U200-150 $12.50Pipe Seal for 3" Piping Through 4" Hole U300 $7.50Pipe Seal for 2" Piping Through 4" Hole U320 $29.00Pipe Seal for Piping w/a 3.900" OD, Through 5" Hole U390 $19.00Pipe Seal for 4" Piping Through 5" Hole U400 $8.00Pipe Seal for 4" x SDR35 Piping Through 5" Hole U400-35 $18.00Pipe Seal for 3" Piping Through 5" Hole U430 $22.00Pipe Seal for Piping w/a 4.900" OD, through 5!" Hole U490 $18.00Pipe Seal for Piping w/a 5.900" OD, through 7" Hole U590 $33.00Pipe Seal for 6" Piping Through 7" Hole U600 $13.50Pipe Seal for 6" x SDR35 Piping Through 7" Hole U600-35 $22.00Electric Cord Grommet, Seals up to 3 Cords Through a 2" Hole UECG $4.50
Flexible Boot FittingsFor straight or angled penetrations.
Cast Iron 2-Bolt Pipe FlangeCast Iron threaded vent and slip discharge flanges.
“Ringer” Pipe GrommetsFor the quick, easy, and sure pipe seal.
FIBERGLASS BASINS, COVERS & ACCESSORIES
Flexible CouplingsLeak-proof seal for hubs and sleeves.Easy to apply in tight spaces. Othersizes available.
UnisealsA positive, mechanical pipe-tobasin seal for flat or curved sur-faces. The tapered inner diameterforces the outer diameter to expandand securely seal the penetratingpipe or tubing without adhesivehardware, or threads. It will seal aflat or curved surfaces even it thepenetrating pipe is at an angle asgreat as 15 degrees.
Uniseals are made from Alcryn® atough, pliable thermoplastic devel-oped by DuPont. It has excellentresistance to most chemical com-pounds, petroleum products,methanol, and most soil. (Alcryn®is trademark of E.I. DuPont Co.,Inc.)
Distributed By: Aqua Technology Group24/7 Sales and Support 800-513-8993www.aquatechnologygroup.com
Under Inspection Plate ! FP100E $44.00!" NPT, Seals Cords from 0.236" to 0.472" OD GRIP050 $11.00#" NPT, Seals Cords from 0.511" to 0.708" OD GRIP075 $11.001" NPT, Seals Cords from 0.236" to 1.024" OD GRIP100 $32.00Inlet Baffle, 8" Wide x 4" Deep x 12" Long PIB12 $55.00Inlet Baffle, 8" Wide x 4" Deep x 18" Long PIB18 $66.00Inlet Baffle, 8" Wide x 4" Deep x 24" Long PIB24 $77.00Inlet Baffle, 8" Wide x 4" Deep x 36" Long PIB36 $99.00Inlet Baffle, 8" Wide x 4" Deep x 48" Long PIB48 $121.00
Price Includes 2 Poly Skids for One Basin POLYSKIDS $65.00
10 Holes Randomly Placed PER105 $65.00
Foam Tape Seal - 1/8" x #" x 6' CGM06F $2.00Butyl Tape Seal - 3/8" x 15' CGM15B $20.00
""- 20 x 1"" Bolts (6), ""- 20 Washers (6) HP1420 $9.005/16"-18 x 1"" Bolts (6), 5/16"-18 Washers (6) HP516 $10.003/8"-16 x 1"" Bolts (6), 3/8"-16 Washers (6) HP38 $12.25
FIBERGLASS BASINS, COVERS & ACCESSORIES
Access Plates - 12 gaugeEpoxy coated 12-gauge steel for easier pump installation and removal.
Inspection Plates - 12 gauge10" diameter for an 8" clear access opening.
Access Plates - !" ThickEpoxy coated "" steel for easierpump installation and removal.
Inspection Plates - !" Thick10" diameter for an 8" clear access opening.
Fiberglass Basin PolyethyleneShipping Skid
Reduce the shipping damage onfiberglass basins 96" or longer.
Cover Perforation AdderPerforate any "" thick steel coverwith !" OD holes.
Gasket MaterialReplacement cover gasket materialfor gas-tight and water-tight seals.
Bolts and WashersReplacement stainless steel hardwarepacks for Topp Industries covers.
Electric Cord GripsEasily adjust your power cord without entering the basin.
Polyethylene BafflesFor directing the path of influent and effluent in a basin.
! With Hardware and Sealing Material. " With (1) ECG Grommet, (1) Discharge Flange, Hardware and Sealing Material
Distributed By: Aqua Technology Group24/7 Sales and Support 800-513-8993www.aquatechnologygroup.com
29
FIBERGLASS BASINDESCRIPTION PART NO. W/FIBERGLASS ANTI-FLOAT
Designed to help garage areas & other facilities handle the volatile wastes they generateInstallation of a TOPP triple garage basin system reduces the possibility ofvolatile wastes entering the sewer system where they could potentially explode.The volatile wastes, which are lighter than water, are separated as they passthrough the system of baffles and rise to the surface. At the surface, the volatilewastes can safely evaporate and the fumes can be vented into the atmosphere.The balance of the waste matter can then safely enter the sewer system.
Distributed By: Aqua Technology Group24/7 Sales and Support 800-513-8993www.aquatechnologygroup.com
20" Wide x 20" Long x 20" Deep FRVB20X20X20F $300.00FG Rectangular Valve Box
Aluminum Cover for FRVB20X20X20F CFM20X20X20A $220.0032" Wide x 30" Long x 25" Deep FRVB32X30X25F $300.00
FG Rectangular Valve Box
Aluminum Cover for FRVB32X30X25 CFM32X30X25A $275.0030" Wide x 40" Long x 36" Deep FRVB30X40X36F $600.00
FG Rectangular Valve Box
Aluminum Cover for FRVB30X40X36 CFM30X40X36A $520.0035" Wide x 41" Long x 35" Deep FRVB35X41X35F $1,000.00
FG Rectangular Valve Box
Aluminum Cover for FRVB35X41X35 CFM35X41X35A $900.0042" Wide x 50" Long x 8" Deep FRVB42X50X48F $1,350.00
FG Rectangular Valve Box
Aluminum Cover for FRVB42X50X48 CFM42X50X48A $1,200.00Hold Open Arm CFMSSHOA $105.00
Constructed of durable, non-corro-sive polyethylene. Offers light-weight construction for easy instal-lation and reduced freight costs.Extremely cost competitive com-pared to fiberglass or concretevalve vaults. Available with or with-out discharge piping and valves.
Optional 18" extension availablefor applications requiring a discharge depth of 36" down to centerline.
Constructed of fiberglass with anintregal fiberglass anti-flotationflange. Designed to house thevalves eliminating the need toenter the wet-well for servicework. Available with or withoutdischarge piping and valves.
12" Extension to our 1"" Rail System SGR125-12EXT $163.0012" Extension to our 2" Rail System SGR200-12EXT $163.0024" Extension to our 1"" Rail System SGR125-24EXT $172.0024" Extension to our 2" Rail System SGR200-24EXT $172.0048" Extension to our 1"" Rail System SGR125-48EXT $204.0048" Extension to our 2" Rail System SGR200-48EXT $204.00
SGR GUIDERAIL MOUNTING KIT FOR A PRE-EXISTING FIBERGLASS BASIN
Stainless Steel Simplex Mounting Studs, Mounted in a Fiberglass Plate, for a 24" ID Basin FPSS24 $263.00Stainless Steel Simplex Mounting Studs, Mounted in a Fiberglass Plate, for a 30" ID Basin FPSS30 $284.00Stainless Steel Duplex Mounting Studs, Mounted in a Fiberglass Plate, for a 30" ID Basin FPSD30 $338.00Stainless Steel Simplex Mounting Studs, Mounted in a Fiberglass Plate, for a 36" ID Basin FPSS36 $322.00Stainless Steel Duplex Mounting Studs, Mounted in a Fiberglass Plate, for a 36" ID Basin FPSD36 $375.00Stainless Steel Simplex Mounting Studs, Mounted in a Fiberglass Plate, for a 42" ID Basin FPSS42 $402.00Stainless Steel Duplex Mounting Studs, Mounted in a Fiberglass Plate, for a 42" ID Basin FPSD42 $482.00Stainless Steel Simplex Mounting Studs, Mounted in a Fiberglass Plate, for a 48" ID Basin FPSS48 $482.00Stainless Steel Duplex Mounting Studs, Mounted in a Fiberglass Plate, for a 48" ID Basin FPSD48 $509.00Stainless Steel Simplex Mounting Studs, Mounted in a Fiberglass Plate, for a 60" ID Basin FPSS60 $857.00Stainless Steel Duplex Mounting Studs, Mounted in a Fiberglass Plate, for a 60" ID Basin FPSD60 $910.00Stainless Steel Simplex Mounting Studs, Mounted in a Fiberglass Plate, for a 72" ID Basin FPSS72 $1,445.00Stainless Steel Duplex Mounting Studs, Mounted in a Fiberglass Plate, for a 72" ID Basin FPSD72 $1,499.00
Distributed By: Aqua Technology Group24/7 Sales and Support 800-513-8993www.aquatechnologygroup.com
Pipe Seal for 1"" Piping (OD) Through a 3" Hole G125 $4.25Pipe Seal for 1!" Piping (OD) Through a 3" Hole G150 $4.50Pipe Seal for 2" Piping (OD) Through a 3" Hole G200 $4.75Pipe Seal for 3" Piping (OD) Through a 4" Hole G300 $6.00Pipe Seal for 4" Piping (OD) Through a 5" Hole G400 $6.75Pipe Seal for SDR35 4" Piping (OD) Through 5" Hole G400SDR35 $6.75
UNISEALS
Pipe Seal for 3/8" Piping Through 1" Hole U038 $3.50Pipe Seal for !" Piping Through 1"" Hole U050 $4.00Pipe Seal for #" Piping Through 1"" Hole U075 $4.00Pipe Seal for 1" Piping Through 1#" Hole U100 $4.50Pipe Seal for 1"" Piping Through 2" Hole U125 $4.75Pipe Seal for 1!" Piping Through 2!" Hole U150 $5.00Pipe Seal for 2" Piping Through 3" Hole U200 $6.50Pipe Seal for 2" Piping Through 3" Hole U200-35 $11.00Pipe Seal for 1"" Ppiping Through 3" Hole U200-125 $13.50Pipe Seal for 1!" Piping Through 3" Hole U200-150 $12.50Pipe Seal for 3" Piping Through 4" Hole U300 $7.50Pipe Seal for 2" Piping Through 4" Hole U320 $29.00Pipe Seal for Piping with a 3.900" OD, Through 5" Hole U390 $19.00Pipe Seal for 4" Piping Through 5" Hole U400 $8.00Pipe Seal for 4" x SDR35 Piping Through 5" Hole U400-35 $18.00Pipe Seal for 3" Piping Through 5" Hole U430 $22.00Pipe Seal for Piping with a 4.900" OD, Through 5!" Hole U490 $18.00Pipe Seal for Piping with a 5.900" OD, Through 7" Hole U590 $33.00Pipe Seal for 6" Piping Through 7" Hole U600 $13.50Pipe Seal for 6" x SDR35 Piping Through 7" Hole U600-35 $22.00Electric Cord Grommet, Seals up to
3 cords Through a 2" Hole UECG $4.50
SGR GUIDERAIL ACCESSORIES
! Includes hardware pack (bolts, washers & gasket tape)
UnisealsA positive, mechanical pipe-to basinseal for flat or curved surfaces. Thetapered inner diameter forces theouter diameter to expand andsecurely seal the penetrating pipe ortubing without adhesive hardware, orthreads. It will seal a flat or curvedsurfaces even it the penetrating pipeis at an angle as great as 15degrees.
Uniseals are made from Alcryn® atough, pliable thermoplastic devel-oped by DuPont. It has excellentresistance to most chemical com-pounds, petroleum products,methanol, and most soil. (Alcryn® istrademark of E.I. DuPont Co., Inc.)
Distributed By: Aqua Technology Group24/7 Sales and Support 800-513-8993www.aquatechnologygroup.com
35
DESCRIPTION PART NO. PRICE
FREEFLOTM BASE ELBOWS 1!" - 3"Base Elbow, Pull-Out Flange, 1"" SS Pump Adapter BERS-0125 $476.00Base Elbow, Pull-Out Flange w/
for Vertical DischargeBase Elbow, Pull-Out Flange 2" SS Pump Adapter for
Vertical Discharge BERS-0320V $924.00Base Elbow, Pull-Out Flange for 3" Horizontal Discharge BERS-0300H $924.00Base Elbow, Bronze (NS) Pull-Out Flange 3" x 2" SS Pump BERS-0320EX $1,698.00
Adapter for Vertical DischargeBase Elbow, Pull-Out Flange for 2!" Horizontal Discharge BERS-0325H $924.00Base Elbow, Bronze (NS) Pull-Out Flange for
3" Horizontal Discharge BERS-0300HEX $1,296.003 x 2 Base Elbow, Bronze (NS) Pull-Out Flange BERS-0325HEX$1,296.00
for Horizontal DischargeSS Upper Guide Rail Bracket for Rail Sizes #", 1", 1"" UGB-STNLS $154.00Powder-coated Upper Guide Rail Bracket for Rail Sizes #", 1", 1"" UGB-PC $58.00SS Intermediate Guide Rail Bracket for #" Rail IGB-0075 $238.00SS Intermediate Guide Rail Bracket for 1" Rail IGB-0100 $238.00SS Intermediate Guide Rail Bracket for 1"" Rail IGB-0125 $238.00
FREEFLOTM BASE ELBOW RAIL SYSTEM COMPONENTS
Built to meet the engineered standardsof municipal wastewater stationsFreeflo™ Base Elbow Rail Systems are designed to config-ure with most vertical and horizontal submersible pumps inthe market today. Systems feature durable iron construction,powder coating for corrosion resistance and compact designfor easy installation.
Freeflo™ Base Elbow Rail System Accessories• Stainless steel or galvanized upper guide rail brackets.• Stainless steel intermediate guide rail brackets for #",
1", 1-1/4", 1-1/2" or 2" rails.• Replacement pull-out flanges for all base elbow rail systems.• 2-piece ring and flange assembly.• Specialty pump adapter flanges for Barnes™ SGV and
Hydromatic® HPG pumps.• Flange gasket kits for inlet or discharge of 3".• Alternate sealing rings for 4" and 6" base elbows.
Distributed By: Aqua Technology Group24/7 Sales and Support 800-513-8993www.aquatechnologygroup.com
36
DESCRIPTION PART NO. PRICE
CHAIN PACKAGES3/16" Dia x 10' 300 Series Stainless Steel Lifting Chain
with hardware CHNSS10 $102.003/16" Dia x 15' 300 Series Stainless Steel Lifting Chain
with hardware CHNSS15 $150.003/16" Dia x 20' 300 Series Stainless Steel Lifting Chain
with hardware CHNSS20 $198.003/16" Dia x 25' 300 Series Stainless Steel Lifting Chain
with hardware CHNSS25 $248.003/16" Dia x 30' 300 Series Stainless Steel Lifting Chain
with hardware CHNSS30 $296.00FREEFLOTM PUMP ADAPTERS
1"" SS Pump Adapter PAF-0125 $88.001!" SS Pump Adapter PAF-0150 $94.002" SS Pump Adapter PAF-0200 $98.00
FREEFLOTM PULL-OUT FLANGES FOR EZ-OUT RETROFIT
Replacement Pull-Out Flange for 1"" Elbow EZR-POF-0125 $332.00Replacement Pull-Out Flange for 1"" Check Valve Elbow EZR-POF-0125CV $523.00Replacement Pull-Out Flange for 2" Elbow EZR-POF-0200 $332.00Replacement Pull-Out Flange for 2" Check Valve Elbow EZR-POF-0200CV $523.00Replacement Pull-Out Flange for 2" Horizontal Elbow EZR-POF-0300H $578.00
FREEFLOTM PULL-OUT FLANGES
Pull-Out Flange for 1"" - 2" Systems POF-0200 $228.00Pull-Out Flange w/ Check Valve for 1"" - 2" Systems POF-0200CV $378.00Bronze (NS) Pull-Out Flange for 1"" - 2" Systems POF-0200EX $338.00Pull-Out Flange for 3" Vertical Discharge Systems POF-0300V $388.00Pull-Out Flange for 3" Horizontal Discharge Systems POF-0300H $418.00Pull-Out Flange for 2!" Horizontal Discharge Systems POF-0325H $418.00Bronze (NS) Pull-Out Flange
for 3" Horizontal Discharge Systems POF-0300HEX $588.00
FREEFLOTM ADAPTERS AND FITTINGS
Replacement O-Ring Kit (2 pcs.) for 1"" - 2" Systems BERS-OR0200 $14.00Optional Adapter (Spacer) for Hpg Grinder Pumps
Distributed By: Aqua Technology Group24/7 Sales and Support 800-513-8993www.aquatechnologygroup.com
37
DESCRIPTION PART NO. PRICE
FREEFLOTM 4" SYSTEMS AND REPLACEMENT PARTS
Base Elbow, Pull-Out Flange for 4" Horizontal Discharge BERS-0400 $1,282.00Base Elbow, Pull-Out Flange for 3" Horizontal Discharge BERS-0430 $1,282.00Base Elbow, Bronze (NS) Pull-Out Flange for
4" Horizontal Discharge BERS-0400HEX $1,866.00
Pull-Out Flange for 4" Horizontal Discharge Systems POF-0400 $536.00Pull-Out Flange for 3" Horizontal Discharge Systems POF-0430 $536.00Bronze (NS) Pull-Out Flange
for 4" Horizontal Discharge SystemsPOF-0400HEX $832.00
SS Upper Guide Rail Bracket for 2" Rail UGB-0200 $198.00SS Intermediate Guide Rail Bracket for 2" Rail IGB-0200 $264.00Sealing Gasket & Bolt / Nut Kit for
4" Horizontal Discharge Systems POK-0400 $118.00
Replacement SS Sealing Ring for 4" Horizontal Discharge Systems SR-0400 $42.00
Alternate Heavy Duty Rubber Ring4" Horizontal Discharge Systems FG-0400 $18.00
FREEFLOTM 6" SYSTEMS
Base Elbow, Pull-Out Flange for 6" Horizontal Discharge BERS-0600 $1,458.00Base Elbow, Pull-Out Flange for 4" Horizontal Discharge BERS-0640 $1,458.00Base Elbow, Bronze (NS) Pull-Out Flange
for 6 Horizontal Discharge BERS-0600HEX $2,384.00
Pull-Out Flange for 6" Horizontal Discharge Systems POF-0600 $658.00Pull-Out Flange for 4" Horizontal Discharge Systems POF-0640 $658.00Bronze (NS) Pull-Out Flange
for 6" Horizontal Discharge Systems POF-0600HEX $1,216.00Sealing Gasket & Bolt/Nut Kit
for 6" Horizontal Discharge Systems POK-0600 $120.00
Replacement SS Sealing Ring for 6" Horizontal Discharge Systems SR-0600 $58.00
Alternative Heavy Duty Rubber Ring for 6" Horiz. Discharge FG-0600 $28.00
FREEFLOTM 8" SYSTEMS
Base Elbow, Pull-Out Flange for 8" Horizontal Discharge BERS-0800 $2,220.00
Base Elbow, Pull-Out Flange for 6" Horizontal Discharge BERS-0860 $2,220.00
Pull-Out Flange for 8" Horizontal Discharge Systems POF-0800 $1,850.00Pull-Out Flange for 6" Horizontal Discharge Systems POF-0860 $1,850.00Bronze (NS) Pull-Out Flange
for 8" Horizontal Discharge Systems POF-0800HEX $2,876.00
SS Upper Guide Rail Bracket for 3" Rail UGB-0300 $292.00SS Intermediate Guide Rail Bracket for 3" Rail IGB-0300 $266.00Sealing Gasket & Bolt/Nut Kit for
8" Horizontal Discharge Systems POK-0800 $158.00Replacement SS Sealing Ring
for 8" Horizontal Discharge Systems SR-0800 $70.00
Alternate Heavy Duty Rubber Ring for 8" Horizontal Discharge Systems FG-0800 $28.00
FREEFLOTM BASE ELBOW RAIL SYSTEM COMPONENTS
Distributed By: Aqua Technology Group24/7 Sales and Support 800-513-8993www.aquatechnologygroup.com
38
“SGR” PACKAGED LIFT STATIONS
Topp Industries offers a complete line of packaged lift stations using theSGR Rail System
Discharge piping and valve material will vary (i.e. PVC, galvanized or stainless steel pipe), depending on which package is selected.
Items not included in package: pump(s), floats or control panel.
126" - 240" DEEP $13,798.00 $18,948.00 $12,326.00 $17,913.00 $17,853.00 $20,838.00
Distributed By: Aqua Technology Group24/7 Sales and Support 800-513-8993www.aquatechnologygroup.com
47
UNISEALS
DESCRIPTION PART NO. PRICE
UNISEALS
Pipe Seal for 3/8" Piping (.0675" OD),Through 1" Hole U038 $3.50
Pipe Seal for !" Piping (.0840" OD), Through 1"" Hole U050 $4.00
Pipe Seal for #" Piping (1.050" OD), Through 1"" Hole U075 $4.00
Pipe Seal for 1" Piping (1.315" OD), Through 1#" Hole U100 $4.50
Pipe Seal for 1"" Piping (1.660" OD), Through 2" Hole U125 $4.75
Pipe Seal for 1!" Piping (1.900" OD), Through 2!" Hole U150 $5.00
Pipe Seal for 2" Piping (2.375" OD), Through 3" Hole U200 $6.50
Pipe Seal for 2" Piping (SDR35 Pipe), Through 3" Hole U200-35 $11.00
Pipe Seal for 1"" Piping (1.660" OD), through 3" Hole U200-125 $13.50
Pipe Seal for 1!" Piping (1.900" OD), Through 3" Hole U200-150 $12.50
Pipe Seal for 3" Piping (3.500" OD), Through 4" Hole U300 $7.50
Pipe Seal for 2" Piping (2.375" OD),through 4" Hole U320 $29.00
Pipe Seal for Piping w/a 3.900" OD,Through 5" Hole U390 $19.00
Pipe Seal for 4" Piping (4.500" OD),Through 5" Hole U400 $8.00
Pipe Seal for 4" x SDR35 Piping (4.330" OD),Through 5" hole U400-35 $18.00
Pipe Seal for 3" Piping (3.500" OD), Through 5" Hole U430 $22.00
Pipe Seal for Piping w/a 4.900" OD,Through 5!" Hole U490 $18.00
Pipe Seal for Piping w/a 5.900" OD,Through 7" Hole U590 $33.00
Pipe Seal for 6" Piping (6.625" OD), Through 7" Hole U600 $13.50
Pipe Seal for 6" x SDR35 Piping (6.299" OD),Through 7" Hole U600-35 $22.00
Electric Cord Grommet, Seals up to 3 cords Through a 2" Hole UECG $4.50
A positive, mechanical pipe-to basin sealfor flat or curved surfaces.Uniseals were designed for holding tanks
but work well in any application where pipepenetrations are required. Proven applica-tions include wastewater lift stations, valveboxes, sump risers, pumping stations, dispenser pans, junction boxes, coolingsystems, and boats, to name a few.Uniseals were designed for pipes with
standard outside diameters (sch40). Thetapered inner diameter forces the outerdiameter to expand and securely seal thepenetrating pipe or tubing without adhesive,hardware, or threads. Uniseals will seal to flat or curved surfaces even if the pene-trating pipe is at an angle as great as 15 degrees.
Uniseals are made from Alcryn®, atough, pliable thermoplastic developed byDuPont. Uniseals have excellent resistanceto most chemical compounds, petroleumproducts, methanol, and most soil. (Alcryn®is trademark of E.I. DuPont Co., Inc.)
Distributed By: Aqua Technology Group24/7 Sales and Support 800-513-8993www.aquatechnologygroup.com
24" ID x 6" Poly Septic Riser, for Concrete Casting BPSR24X6C $33.0024" ID x 24" Poly Septic Riser, for Concrete Casting BPSR24X24C $75.0024" ID x 6" Poly Septic Riser, Used for Retrofit BPSR24X6R $33.0024" ID x 24" Poly Septic Riser, Used for Retrofit BPSR24X24R $75.00
Riser Kit includes:(1) Polyethylene Septic Riser, used for retrofit on concrete septic tanks; (10) Concrete Anchors, Nuts, and Washers and (1 roll) Butyl Gasket Material
24" ID Poly Septic Riser Extension BPSR24X6E $38.00
Riser Extension Kit includes:(1) 24" ID x 6" Polyethylene Septic Riser Extension, for use on part #’s BPSR24X6C, BPSR24X6R, BPSR24X24C, and BPSR24X24R;(4) ""-20 stainless steel hex head bolts, washers, nuts and (1 roll) Butyl Gasket Material
24" ID Non-Skid Fiberglass “Heavy” Septic Riser Cover* C25WFNST $77.00Designed to fit:
24" ID Topp Polyethylene Septic Riser24" ID Ultra Rib Septic Riser24" ID Spiral Septic Riser24" ID Polyethylene Corrugated Wall Septic Riser24" ID Polyethylene Corrugated Smooth Wall Septic Riser
Riser Cover includes:Stainless steel hex head bolts, washers, nuts and (1 roll) Butyl Gasket Material
Gasket Pack for retrofitting our Polyethylene Septic Riser to a concrete septic tank GPSR $22.00
Gasket Pack Kit includes:(10) Concrete Anchors, Nuts, and Washers and (1 roll) Butyl Gasket Material
Gasket Pack for attachment to our Polyethylene Septic Riser GPSRE $22.00
Gasket Pack Kit includes:(4) ""-20 stainless steel hex head bolts, washers, nuts and (1 roll) Butyl Gasket Material
Gasket Pack Kit includes:(4) 14x1" stainless steel, tamper-proof, flush-mount lag bolts, (1) 3/16" hex head driver, (1) Gasket Material installed.*With Hardware and Sealing Material
SEPTIC RISERS, COVERS & ACCESSORIES
24" PolyethyleneSeptic Riser
24" Poly Septic Riser Extension
Non-Skid Solid FiberglassSeptic Cover for ourPolyethylene Septic Risers
Polyethylene Septic RiserGasket Pack
For installation for retrofit of polyethylene riser.
Polyethylene Septic RiserExtension Gasket Packs
Gasket Pack for FiberglassSeptic Riser Cover
Designed to fit new and retrofit olderconcrete septic tanksTOPP corrosion-resistant polyethylene septic tank riserseliminate the need to cut tubing from awkward lengths.Risers are available in 24” and 6” heights for bolt-on or con-crete cast-in work. 6-inch extensions are also available.Risers and extensions are lightweight and UPS shippable.Our popular fiberglass cover securely fits TOPP poly risersand extensions. Don’t sell yourself, your workers, or yourcustomers short. Ask about our riser and extension designfeatures. Save time, money and productivity.
Distributed By: Aqua Technology Group24/7 Sales and Support 800-513-8993www.aquatechnologygroup.com
49
DESCRIPTION PART NO. PRICE
FIBERGLASS SEPTIC RISER SYSTEM
Fiberglass Septic Adapter Plate for 18" openings SAP18F Coming SoonFiberglass Septic Adapter Plate for 24" openings SAP24F Coming SoonFiberglass Septic Adapter Plate for 30" openings SAP30F Coming SoonFiberglass Septic Adapter Plate for 36" openings SAP36F Coming SoonFiberglass Septic Adapter Plate for 48" openings SAP48F Coming Soon