Top Banner
Topography The Art of Reading & Using Contour Maps
16
Welcome message from author
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
Page 1: Topography The Art of Reading & Using Contour Maps.

Topography

The Art of Reading &

Using Contour Maps

Page 2: Topography The Art of Reading & Using Contour Maps.

What is a Topographic Map?

Earth's surface shape shown by contour linesContour lines - lines connecting points of equal elevationmeasure mountain height, ocean depths, slope steepnessAllows planning for –

parkshiking/ridingbuilding/constructiondrainage

Page 3: Topography The Art of Reading & Using Contour Maps.

Reading Topographic Maps

Contours – lines of different widths

Contours never cross

Used to determine elevations – index contours are wider

Elevations printed along index contours

Narrower contours found between index contours – help show more details of land surface

Page 4: Topography The Art of Reading & Using Contour Maps.

Contours close together = steep slopes

Widely spaced contours = fairly level/flat ground slope relatively level

contour interval = elevation difference between adjacent contour lines

Reading Topographic Maps (continued)

Page 5: Topography The Art of Reading & Using Contour Maps.
Page 6: Topography The Art of Reading & Using Contour Maps.

Index Contour (Elevation = 100’)Index Contour (Elevation = 200’)

Every 5 lines: (200-100)/5 = 20’

Therefore, contour interval = 20’

Page 7: Topography The Art of Reading & Using Contour Maps.

What Does It All Mean?The more contour lines packed closely together represent steep, cliff-like areas

Page 8: Topography The Art of Reading & Using Contour Maps.

What Does It All Mean?The more two contour lines are spread apart, the flatter the area

Page 9: Topography The Art of Reading & Using Contour Maps.

What Does It All Mean?Contour lines that form a mountain-like shape show where water has cut a path (valley)

Page 10: Topography The Art of Reading & Using Contour Maps.

• What is the contour interval?

• What is the elevation of Mt. Rainer?

• Describe the circled area.

• Describe this circled area.

14,000

13,800

14,000 – 13,800 = 200200 / 5 lines = 40’

X

Page 11: Topography The Art of Reading & Using Contour Maps.

What is the average elevations for houses 3, 4, and 5 to the nearest tenth of a meter?

Contour Interval

= 3 m

Contour Interval

= 3 m

112

.

9 7 3

82

..

....

Page 12: Topography The Art of Reading & Using Contour Maps.

PredictionsHow might this area’s landform change over time?

Page 13: Topography The Art of Reading & Using Contour Maps.

Remember…Topographic maps can help you find elevations, Trails, and Places to climb

Topographic maps show you the “lay of the land” (landforms) by connecting points of equal elevation

Index contour lines are darker and have an elevation associated with it

The ‘Contour Interval’ is the elevation distance between two adjacent lines

Scales are usually shown in inches or feet

Page 14: Topography The Art of Reading & Using Contour Maps.

Mt. Capulin Capulin Volcano National Monument, located in northeastern New Mexico, was designated a U.S. National Monument on August 9, 1916.

It is a well-preserved, relatively young (58,000 to 62,000 years old), symmetrical cinder cone. It rises steeply from the surrounding grassland plains to an elevation of 8,182 feet above sea level. The irregular rim of the crater is about a mile in circumference and the crater about 400 feet deep.

Page 15: Topography The Art of Reading & Using Contour Maps.
Page 16: Topography The Art of Reading & Using Contour Maps.