Topic 8.3 Stoichiometry: Limiting and Excess Reagent Calculations By Kirsten Page 320- 327
Jan 21, 2016
Topic 8.3 Stoichiometry: Limiting and Excess
Reagent Calculations
By Kirsten
Page 320-327
What is Stoichiometry?Lets take a closer look.
A method of predicting or analyzing the quantities of the reactants and products participating in a chemical process
Three forms including gas stoichiometry, solution stoichiometry, and gravimetric stoichiometry.
Example of Stoichiometry
In a precipitation reaction, KOH(aq) reacts with excess Sn(NO3)2(aq) to produce a precipitate. If the mass of precipitate is 2.57 g, what mass of KOH(s) was present in the original solution?
First Step:
Balance Equation:
2KOH(aq) + Sn(NO3) 2(aq) Sn(OH)2(s) + 2KNO3(aq)
Moles n2 n1
Mass ? 2.57g
Molar Mass 56.11 g/mol 152.71 g/mol
Second Step:n1= 2.57 g x (1 mol/ 152.71 g)
= 0.0168 mol
n2= 0.0168 mol x (2/1)
= 0.0337 mol
m= 0.0337 mol x (56.11 mol/g)
= 1.89g
Understanding Chemical Principles
Conservation of Mass in a Chemical Reaction In chemical reactions the mass is conserved,
meaning that the mass of the products equals the mass of the reactants. Mass Products = Mass Reactants
There will always be an equal number of moles of each element before and after a reaction takes place
Identifying Reagents
Limiting Reagents Completely consumed in a chemical reaction
Excess Reagents More is present than is necessary to react with
the limiting reagent The limited reagent is the reagent that is
being analyzed in a quantitative analysis where limiting and excess reagents are present.
How to find Limiting Regent:
Ensure that all masses given are in moles. Take the molar amounts from each
substance and divide by the coefficient of that substance in the balanced equation.
The smaller number will be the limiting reagent.
Example 1:
300 mL of 0.100 mol/L of BaCl2(aq) and 200 mL of 0.110 mol/L of Na2CO3(aq) are mixed. What is the limiting reagent in the reaction?
Answer: Na2CO3
Why?
BaCl2(aq) + Na2CO3(aq) BaCO3(s) + 2NaCl(aq)
With a 1:1 mole ratio of reactants he species present in least amount is the limiting reagent.
nBaCl2= 300mL x (0.100mol/L)
=30.0 mmol
nNa2CO3= 200 mL x (0.110mol/L)
= 22.0 mmol
Therefore Na2CO3(aq) is the limiting reagent
Example 2:
100.0 g of iron (III) chloride and 50.00g of hydrogen sulfide react. What is the limiting reagent?
2FeCl3 + 3H2S Fe2S3 + 6HCl
Answer: Iron(III) chloride
100g/ 162.204 g/mol
=0.6165 mol Hydrogen Sulfide
50.00g/ 34.081 g/mol
=1.467 mol
1.467 mol/ 3
=0.489 Iron (III) chloride is the limiting reagent
Example 3:
In an experiment, 26.8 g of iron(III) chloride in solution is combined with 21.5 g of sodium hydroxide in solution. Which reactant is in excess, and by how much? What mass of each product will be obtained?
Answer:
FeCl3(aq) + 3NaOH(aq) Fe(OH)3(s) + 3NaCl(aq)
26.8 g 21.5g m m
162.20g/mol 40.00 g/mol 106.88 g/mol 58.44 g/mol
nFeCl3 = 26.8 g x (1mol/ 162.20g0
=0.165 mol
nNaOH = 21.5 g x (1 mol / 40.00g)
= 0.538 mol
Answer:
nNaOH=0.165 mol x (3/1)
=0.496
nNaOH= 0.538 mol - 0.496 mol
= 0.042 mol
mNaOH = 0.042 mol x (40.00g/1 mol)
= 1.7g
Answer:mFe(OH)3= 0.165 molFeCl3 x (1 mol Fe(OH)3/1 molFeCl3) x
(106.88 gFe(OH)3/ 1 mol Fe(OH)3)
= 17.7 g Fe(OH)3
m NaCl = 0.165 molFeCl3 x (3 mol NaCl/ 1 mol FeCl3) x (58.44 g NaCl / 1 mol NaCl)
= 29.0 NaCl
Therefore sodium hydroxide is in excess by 1.7 g, the mass of iron (III) hydroxide produced is 17.7 g and the mass of sodium chloride produced is 29.0g.
Theoretical yields Vs.
Actual yields The theoretical yield of a chemical reaction is
the amount of product formed if all of the limiting reagent reacts. Calculated using stoichiometry.
The actual yield is the actual quantity of products formed after a chemical reaction.
Usually the theoretical yield will be greater than the actual yield that is produced.
Reasons for Discrepancy
The actual yield of a chemical reaction is usually less than the theoretical yield for these reasons Purity of chemicals being used Errors in measurements Experimental factors that may have lead to loss of
reactants
% Error Calculations:
A reasonable quantity of reasonable excess reagent is 10%
Example 4:
You decide to test the method of stoichiometry using the reaction of 2.00 g of copper(II) sulfate in solution with an excess of sodium hydroxide in solution. What would be a reasonable mass of sodium hydroxide to use?
CuSO4(aq) + 2NaOH(aq) Cu(OH)2(aq) + Na2SO4(aq)
2.00 g m
159.62 g/mol 40.00 g/mol
Answer:nCuSO4 = 2.00g x (1 mol/159.62 g)
=0.0125 molnNaOH =0.0125 mol x (2/1)
=0.0251 molmNaOH = 0.0251 mol x (40g/1mol)
= 1.00 gNow add 10% to this amount to determine the
reasonable mass of sodium hydroxide to use.1.00 g + 0.10g=1.10g
For More Information:
Nelson Chemistry Text Pages 320-327
The Key- Chemistry 20 D2L Web Lessons