This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Doming Set:999 755 Large doming block + set of 31 punches on a stand 230.43
999 CI4 Steel doming cube + set of 21 punches on a stand 254.94
Doming Punches:999 764 Set of 15 Steel Doming Punches 38.85
hole width 5.0 to 19.0mm
999 765 Set of 3 doming punches. Diam. 25, 31.1, 37.6 mm 41.37
999 0971 Set of 18 steel doming punches 2.5mm - 14mm 33.75
999 766 Set of 31 steel doming punches 2mm - 32mm 140.08
999 767 Set of 12 boxwood doming punches 40.75
Disc Cutting Set:999 772 Disc Cutting Set (small). 40.43
To cut a maximum of 1.0mm sheet.
To cut discs from approximately 5mm - 16mm diameter.
999 758
999 0969
999 755
999 764
999 765
999 772
999 766
999 767
Doming Blocks & PunchesThe metal thicknessdetermines the size of thepunch used with the requireddie. A similar diameter ofpunch and die should be usedfor thin gauge of metals andthicker gauges require a largerdie and smaller punch.
999 CI4
13.04 Tools Metal Forming new 19/12/07 16:14 Page 539
999 796 Flat Stake - extra large 13cm x 13cm 31.49
Flat stakes
These Flat Stakes or Bench Blocks are useful for flattening objects,laying out work or chasing. They are made of tool steel ground flat,polished and case-hardened.
13.04 Tools Metal Forming new 19/12/07 16:15 Page 540
541order online: cooksongold.com
toolstriblets - steel
tools
999 843
999 837
999 836
999 831
999 829
Triblet Profile Code Measurement (mm) Price/£
A B C
Square - sq. edge 999 829 4 x 4 10 x 10 270 26.23
Square - cushion (rounded edge) 999 831 10 x 10 25 x 25 350 37.20
Oval 999 836 4 x 6.5 15 x 20 230 28.68
999 837 8 x 12 26 x 34 320 36.22
Pear (drop) 999 842 6 x 4 18 x 14 280 43.72
999 843 13 x 8 34 x 24 350 49.97
A = TipB = TopC = Length inc handle
AB
C
13.04 Tools Metal Forming new 19/12/07 16:15 Page 541
Anticlastic raising is atechnique of metalworkwhereby sheet metal isformed to develop two curvesat right angles to each other. In particular the Cows Tongue& Jug stakes can be used toform anticlastic shapes withsilver sheet.
13.04 Tools Metal Forming new 19/12/07 16:15 Page 543
544 orderline: 0845 100 1122
toolsmandrelsround & oval bangle mandrels
tool
s
Code Description Price/£
Round Bangle Mandrels:999 802 Round Cast Iron Mandrel 25-50mm 28.30
999 803 Round Cast Iron Mandrel 40-70mm 35.12
999 804 Round Cast Iron Mandrel 50-90mm 41.58
999 805 Round Wooden Bangle Mandrel 40-75mm 420mm Long 20.79
Oval Bangle Mandrel:999 811 Oval Cast Iron Mandrel - small 57.18
Approximate size:
Top - 35mm x 25mm
Base - 55mm x 45mm
999 812 Oval Cast Iron Mandrel - medium 66.71
Approximate size:
Top - 55mm x 45mm
Base - 75mm x 65mm
999 813 Oval Cast Iron Mandrel - large 81.43
Approximate size:
Top - 75mm x 65mm
Base - 95mm x 85mm
999 814 Oval Wooden Bangle Mandrel large 420mm long 20.79
Cast Iron Bust:999 1017 Cast Iron Bust for shaping neck collars
& assembling necklets & chain. Weight 8kg 136.29
Bangle Stretcher:999 804A A quick way to enlarge round bangles up to
3" in diameter. Not to be used on stone set items.
This is an upright mandrel on a cast iron base,
with lever handle. 396.55
999 813
999 805
999 804
999 1017
999 804A
...silver bangles?
see page 46
13.04 Tools Metal Forming new 19/12/07 16:15 Page 544
Claw Making Jig:999 278 Claw Making Jig - for making wire collets 44.97
999 252
999 256
999 264999 262
999 278
999 250
Collet Plate & PunchesThese plates and matching punches are ideal forproducing a variety of bezel shapes for bothrubover settings and the base for claw settings.
4,3,2 & 1.5mmTotal size of mill (without handle) 375 x 220 x 370mmNett Weight 44.5Kg
999 HAC 1Roller Size 150 x 60mmSheet Thickness 7mmSheet Width 100mmWire Capacity 9 - 1mmNo of wire grooves 11Gear Ratios 5 - 1Extention Rollers 4 ’D’ Grooves
4,3,2 & 1.5mmTotal size of mill (without handle) 400 x 220 x 370mmNett Weight 48Kg
All machines have calibrated discs fitted to the topand are marked in 0.001” and 0.025mmincrementsand give the roll gap. These discs are useful forrepetition work and will assist inproviding a constantproduct size.
13.04 Tools Metal Forming new 19/12/07 16:16 Page 551
552 orderline: 0845 100 1122
toolsdurston rolling mills - rolling mills & stands
tool
s
Code Description Price/£
Rolling Mills:999 AXY Rolling Mill - D2 130 1070.70
The D2 'Stacked Mill' is the first choice for busy workshops, schools and
colleges needing maximum sheet rolling width and a full range of wire
reducing grooves (with groove indicator) from as much as 15mm initial
material size down to 1mm square. The machine has two sets of rolls,
one for sheet (extended for D shapes) and the other grooved for square
wire. These are set in high quality maintenance free bearings and are
guaranteed for life.
The rollers are 130mm wide and 60mm diameter.
Maximum thickness for sheet: 7mm
Wire capacity: 10 - 1mm
Dimensions:380 x 200 x 580mm
Weight: 70kg
This mill will be supplied directly from supplier.
4,3,2 & 1.5mmTotal size of mill (without handle) 380 x 200 x 580mmNett Weight 70Kg
rolling mills
The rolling mill is a machine designed toproduce thinner gauges of sheet metaland wire. Most studio jewellers use ahand cranked mill (although automatedmills are used as well). Each mill consistsof two smooth, highly polished, hardenedsteel rolls, mounted in the housingparallel to each other. The rolling mill isused for reducing the thickness of sheetmetal. The rolls for wire are cut with 'V'shaped grooves arranged in decreasingsizes, allowing for gradual reduction ofwire diameter and producing a squarecross section of wire. Most studiojewellers choose a “combination” mill -half of the roll is smooth (for sheet metal)and half is grooved (for wire). This limitsthe width of metal to be rolled (averagingabout 2"- 2.5"). Basic use and care of therolling mill is covered in most jewelleryand metalworking books
All mills held in stock are combination mills.
13.04 Tools Metal Forming new 19/12/07 16:16 Page 552
553order online: cooksongold.com
toolsring stretchers & sizing equipment
gem ring stretchers, wedding ring stretchers
tools
999 AHX
999 AHV
999 AHW
999 AHX2
Code Description Price/£
Gem Ring Stretchers:999 AHV Medium Duty Gem Ring Stretcher 83.28
999 AHW Heavy Duty Gem Ring Stretcher 118.55
This enlarger enables stone set rings to be sized.
It rolls out the shank without stressing the setting.
The set of rollers accommodate most ring widths.
Upright Wedding Ring Stretcher & Reducer:999 AHX Upright Wedding Ring Stretcher and reducer 176.72
This ring sizer enlarges & reduces wedding ring bands.
Bands up to 12mm wide can be reduced by
compression in one of the 16 countersunk dies.
Please Note: Size marked on machine are approximate only.
The machine may sometimes be supplied without size markings.
999 AHX2 Unmarked spare mandrel for upright ring stretcher 42.45
We can also obtain spare mandrels with US and continental markings.
999 AHX3 Wedding Ring Stretcher 327.16
This machine comes with 14 parallel dies in place of
the conventional tapered spindle. This method ensures
parallel sizing without the need to invert the ring.
Each die has six segments to minimise the risk of marking.
It is also fitted with revolving base for reducing plain wedding rings.
Ring Size Cutter999 ST04 Supplied with 7 cutters for removing the following;
1/2, 3/4, 1, 1 1/4, 1 1/2, 1 3/4, and 2 full sizes. 192.32
Choose the cutter that equals the amount you want to remove. Adjust the cutter bars and
insert the ring, pull the handle to remove the exact amount of shank. The cut is always
parallel, which makes soldering fast and neat. The piece of shank removed can be reused to
enlarge another appropiate width shank.
999 AHX3
999 STO4
999 ST04
13.04 Tools Metal Forming new 19/12/07 16:16 Page 553