This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
CLYMER SPORT VEHICLE BLUE BOOK• Blue Book/trade-in guide
for motorcycles, snowmobiles, personal watercraft and ATVs
• Complete references of dealer prices, loan values, comparable specifications and wholesale prices
70-0700 $53.95
ALL-TERRAIN VEHICLEMAINTENANCE MANUAL VOLUME II• Complete specifications and service data for all-terrain vehicles• Maintenance intervals, adjustments and tune-up procedures
are clearly outlined• Hundreds of exploded views and illustrations• Easy-to-follow instructions• 4-wheel models produced from 1988-9270-0900 Volume II $32.95• The following models are covered:HONDATRX125, 200, 200SX, 250R (86-89); TRX250X, 300, 300FW, 350 (86-87); TRX350D (87-89)KAWASAKIKLF110, 185, 220; KSF250; KXF250; KLF300, 300 4x4POLARISBig Boss; Trail Blazer; Trail Boss; Trail Boss 350LSUZUKILT80, 160E, 230E, 250S, 250R, 300E; LT-F300; LT500R; LT-4WD; LT-F4WD; LT-F4WDX; LT-F250YAMAHAYFM80, 100; YFA1; YFM200DX; YFM225, 250; YFU1; YFU1TYFS200; YFB250; YFM350ER; YFM350FW; YFM350X; YFZ350
ALL-TERRAIN VEHICLE MAINTENANCE MANUAL VOLUME I• Guides you through the complete maintenance of
3- and 4-wheel ATVs• Maintenance intervals, adjustments and tune-up procedures
are clearly outlined• Hundreds of exploded views and illustrations,
step-by-step instructions• 4-wheel models produced from 1974-8770-0800 Volume I $32.95• The following models are covered: HONDAATC70; TRX80; ATC90; ATC110; ATC125M, TRX125; ATC185; ATC200; ATC200X;TRX200SX; ATC250ES; ATC250SX; TRX250; TRX250XKAWASAKIKLT110; KLF110; KLT160; KLT185; KLF185; KLT200; KLT250; KXT250; KSF250; KLF300POLARISScrambler; Trail Boss; Cyclone; Trail Boss 4x4SUZUKIALT50; LT50; LT80; ALT125; LT125; ALT185; LT185; LT230E; LT230S; LT230GE; LT-F230;LT250E; LT250EF; LT250R; LT300E; LT500R; LT4WDYAMAHAYFM80; YT125; YT175; YTM200; YTM225; YFM200; YFM225; YTZ250; YFM350XT
CLYMER TECHNICAL DATA CD• Contains all technical specifications and
labor times for motorcycles and ATVs• CD is updated twice per year at a cost
of $122.00 each and includes both editions
• Dealer registers with Auto Data toreceive password
• 2nd edition of CD will ship to dealerdirectly from Auto Data
70-0904 $123.00
MANUALS
ATV • TUCKER ROCKY DISTRIBUTINGNEW PART NUMBERS ARE RED • ALSO SEE OUR 2007 APPAREL CATALOGTOOLS & SUPPLIES
Ultima-Tool™ Multi-Tool• Adjustable wrench• Needle nose pliers
(spring loaded)• Large knife blade• Wood saw• Flat screwdriver• File • Wire cutter/stripper• Bit driver with adapter
Essenti-Tool™ Multi-Tool• Needle nose pliers• Small knife blade• Flat screwdriver• File• Wire-cutter/stripper• Hole punch• 10mm wrench• Scissors
MOTION PRO®
T-6 TOOL PACK• Constructed from heavy-duty 1680D nylon with
3000cc capacity• Main fold-out compartment with additional outer
storage pocket• 2” belt with full-length padding and quick-release
buckle adjusts to fit 28” to 48” waist• Removable multi-purpose work mat/map pouch• Hide-away heavy-duty rain cover• Adjustable compression straps and zippered side pockets• Rescue whistle and Carabiner compass• Non-slip textured backing• Specifically designed to hold Motion Pro® lightweight trail tools• Tools sold separately31-1501 $49.99
MECHANIX WEAR®
TOOL BAG• Tools not included55-6668 $49.95
BLINGSTARHOLESHOT BROOM• The re-designed 2-piece Holeshot Broom is now available• Dial in those concrete starts• Broom unscrews in middle for storage• Comes with a gripped handle and built-in scraper to remove
unwanted dirt at the starting gate• It’s a must if you want to pull holeshot in your next moto• Also great to sweep out trailer floor• 10.25”W x 3.5”T x 4.6”D
(handle 57.6”)37-8262 $30.10
TOOLS BAGS & ACCESSORIES
ATV • TUCKER ROCKY DISTRIBUTINGNEW PART NUMBERS ARE RED • ALSO SEE OUR 2007 APPAREL CATALOGTOOLS & SUPPLIES
TOOLS & SUPPLIES
878
SPORT BODY
UTILITY BODY
SEATS &GRAPHICS
CONTROL
FUEL & AIR
ELECTRICAL
TIRES
TIRE/WHEELKITS
WHEELS
BRAKE
DRIVE
SUSPENSION
BEARINGS
EXHAUST
HARD & SOFTLUGGAGE
DUCKSUNLIMITED®
HUNTING
AG &FARMING
PLOW
WINCH
UTV
ENGINE
GENERALACCESSORIES
RAMPS &TIEDOWNS
CHEMICAL
TOOLS &SUPPLIES
DISPLAY &PROMO
CROSSREFERENCE
WARN WORKS®
PULLZALL™
• 110V AC corded• Lightweight utilitarian device designed
to assist the tradesman in lifting or moving heavy objects
• 1,000 pound working load for lifting or pulling• Variable speed trigger with integrated directional switch• Electronic load limiter with L.E.D. indicator protects the unit
from overload and maintains structural safety factor• 15’ of 7/32” wire rope with tension plate• Self locking gear train holds rate capacity• Breaker with reset button• 12” long, 8” wide, 8” tall• Integrated swiveling anchor hook37-4105 $327.15
WARN WORKS®
H1000 AC HOIST• AC powered hoist is specifically
designed for lifting applications at your shop• 1,000 lb. capacity, enough for the biggest ATVs• Safety features like a load limiter and emergency stop button• Quick and easy to use right out of the box37-4059 $843.09
QUADBOSS ATV DISPLAY/WORK STAND• Great for displaying or working on any ATV• 2,000 lb. total capacity• Adjustable height (max 24” deck) and width (54” to 60”)• Ships UPS• Plastic tips protect floor• Loading ramps not included, may be ordered separately• See our ramps in Ramps & Tiedowns Section56-0061 $448.99
SUPER DUCT TAPE• Comes in a 2” wide, 60 ft. roll• Perfect size for gear bagDescription P/N RetailSilver 10-0271 $6.15Red 10-0273 6.15Blue 10-0274 6.15Black 10-0275 6.15
MSR® SILENCER PLUG• Protects silencer packing during washing • Turning the handle expands the plugApplication P/N Retail2-Stroke 34-0276 $7.954-Stroke 34-0599 9.99
34-0276
34-0599
SILENCER PLUGS & SHOP APRONS
TOOLS & SUPPLIES
TOOLS & SUPPLIES
879
SEE CATALOG UPDATES AT
SPORT BODY
UTILITY BODY
SEATS &GRAPHICS
CONTROL
FUEL & AIR
ELECTRICAL
TIRES
TIRE/WHEELKITS
WHEELS
BRAKE
DRIVE
SUSPENSION
BEARINGS
EXHAUST
HARD & SOFTLUGGAGE
DUCKSUNLIMITED®
HUNTING
AG &FARMING
PLOW
WINCH
UTV
ENGINE
GENERALACCESSORIES
RAMPS &TIEDOWNS
CHEMICAL
TOOLS &SUPPLIES
DISPLAY &PROMO
CROSSREFERENCE
PROGRIP®
SILENCER PLUG• Silencer plugs are made of soft rubber• Display contains 6 2-stroke and
ATV • TUCKER ROCKY DISTRIBUTINGNEW PART NUMBERS ARE RED • ALSO SEE OUR 2007 APPAREL CATALOGTOOLS & SUPPLIES
TOOLS & SUPPLIES
880
SPORT BODY
UTILITY BODY
SEATS &GRAPHICS
CONTROL
FUEL & AIR
ELECTRICAL
TIRES
TIRE/WHEELKITS
WHEELS
BRAKE
DRIVE
SUSPENSION
BEARINGS
EXHAUST
HARD & SOFTLUGGAGE
DUCKSUNLIMITED®
HUNTING
AG &FARMING
PLOW
WINCH
UTV
ENGINE
GENERALACCESSORIES
RAMPS &TIEDOWNS
CHEMICAL
TOOLS &SUPPLIES
DISPLAY &PROMO
CROSSREFERENCE
TOOLS
TOOLS & SUPPLIES
TOOLS & SUPPLIES
881
SEE CATALOG UPDATES AT
SPORT BODY
UTILITY BODY
SEATS &GRAPHICS
CONTROL
FUEL & AIR
ELECTRICAL
TIRES
TIRE/WHEELKITS
WHEELS
BRAKE
DRIVE
SUSPENSION
BEARINGS
EXHAUST
HARD & SOFTLUGGAGE
DUCKSUNLIMITED®
HUNTING
AG &FARMING
PLOW
WINCH
UTV
ENGINE
GENERALACCESSORIES
RAMPS &TIEDOWNS
CHEMICAL
TOOLS &SUPPLIES
DISPLAY &PROMO
CROSSREFERENCE
MSR® REMOVABLE SOCKET T-HANDLE• Perfect fanny pack tool• Features removable socket• Comes with 8, 10, 12, and 13mm sockets• Can be used with other socket sizes you
have in your tool box34-0478 $18.99
MSR®
T-HANDLE TOOL SET• Includes 6, 8, 10, 12, 13, 14 and
17mm sizes• Includes #3 phillips• Heavy-duty vinyl carrying case77-2704 $41.95
MSR®
T-HANDLE 3-WAY SOCKET • Compact sizing for easy fit in many
fanny packs• Solidly built from chrome vanadium tool
steel for corrosion resistance and durability• 8, 10 and 12mm sockets are welded in
place on tri-socket34-2102 $16.95
MSR® T-HANDLE 3-WAY ALLEN WRENCH • Comes complete with 4, 5 and 6mm
allen heads swaged on ends of tri-allen34-2101 $16.95
MOTION PRO®
DUAL DRIVE BALL-ENDALLEN T-HANDLE SET• Use T-handle hex to tighten/loosen
fasteners and ball-end hex on shaft forquick installation/removal of fasteners
• Ball-end allows for better access to hard-to-reach allen-head bolts (up to25-degree working angle)
• Compact 6-3/4” shaft lengths for tightspaces and easy transport
• Chrome-vanadium tool steel shaft and T-Handle
• Durable hard nickel-pewter finish• Lifetime replacement manufacturer’s
MOTION PRO® RACERMINI T-HANDLE 6MM• Compact size for easy transport• European fasteners• OEM hose clamps15-8401 $11.99
TOOLS
ATV • TUCKER ROCKY DISTRIBUTINGNEW PART NUMBERS ARE RED • ALSO SEE OUR 2007 APPAREL CATALOGTOOLS & SUPPLIES
TOOLS & SUPPLIES
882
SPORT BODY
UTILITY BODY
SEATS &GRAPHICS
CONTROL
FUEL & AIR
ELECTRICAL
TIRES
TIRE/WHEELKITS
WHEELS
BRAKE
DRIVE
SUSPENSION
BEARINGS
EXHAUST
HARD & SOFTLUGGAGE
DUCKSUNLIMITED®
HUNTING
AG &FARMING
PLOW
WINCH
UTV
ENGINE
GENERALACCESSORIES
RAMPS &TIEDOWNS
CHEMICAL
TOOLS &SUPPLIES
DISPLAY &PROMO
CROSSREFERENCE
KASTAR LATCH-ON™
5-PIECE RATCHETING BOXWRENCH SET• Built-in non-slip retaining ring in each
ratchet wheel to create the ultimate inspeed and safety when turning fasteners
• A nut can be tightened or loosened up to 5 times faster than with a conventionalwrench or ratcheting wrench
• 7/8, 9/10, 11/12, 13/14 and15mm/17mm
• Exceeds GSA torque specificationGGG-W-001405 for torque capacity
15-1244 $79.95
MOTION PRO®
WING NUT SOCKET SET• Set includes large and small 3/8”
drive wing nut sockets• Designed to remove over-tightened
or stuck wing nuts• Ideal for use on brake cables and rods• Can be used with air tools15-8224 $35.99
MSR®
STEERING STEM & FORK CAP WRENCH• 12-point style wrench for easy
nut access• Longer handle for greater leverage• 30 and 32mm steering stem and fork
cap wrench34-2104 $17.95
MOTION PRO®
BALL END ALLEN SET • Made of chrome-vanadium tool steel• Includes 1.5, 2, 2.5, 3, 4, 5, 6, 8 & 10mm• Ball end allows for better access to
allen-head bolts (up to 25° working angle)• Convenient holder included15-8185 $18.99
MOTION PRO®
ALLEN EXTENSION• 5mm allen on 3/8” extension
for hard-to-reach case bolts• Designed for use with air tools• Great for splitting engine cases15-8184 $8.99
BIKEMASTER®
10-PIECE 3/8” DRIVEMETRIC FLARE CROW FOOTWRENCH SET ON RAIL• Contents: 10, 11, 12, 13, 14, 15, 16,
17, 18, 19mm• For use in confined areas• Carbon steel hardened and heated with
black finish15-1530 $39.95
15-1529
15-1528
BIKEMASTER®
SQUARE DRIVEMICROMETER ADJUSTABLETORQUE WRENCHES• 3/8” Sq. Dr. marked range (5-80 Ft.Lbs)• 1/2” Sq. Dr. marked range (10-150 Ft.Lbs)• Reversible ratchet head• Micrometer-type sleeve allows accurate
pre-set torque values to be setDescription P/N Retail3/8” Sq. Dr. 15-1528 $59.951/2” Sq. Dr. 15-1529 64.95
• 6-point sockets• Manufactured from chrome vanadium steel• Chrome-plated and fully polished15-1539 $13.95
15-1536
15-1535
BIKEMASTER®
WOBBLE EXTENSION BARS• Allows sockets to be driven at up to 15˚
off vertical• Chrome steel hardened, heated and
polished Description P/N Retail1/4” Sq. Dr. Bar Set• Contents: 50, 100, 150, and 250mm longBar Set 15-1535 $17.953/8” Sq. Dr. Bar Set• Contents: 45, 75, 150, 250 mmBar Set 15-1536 $24.95
MOTION PRO®
ADJUSTABLE TORQUEWRENCH ADAPTER • Torque any fastener with a combination
wrench or allen wrench• Will work with 6mm (1/4”) through
19mm (3/4”) combination wrenches• Will work with 6mm through 8mm allen
wrenches• Heat-treated steel with a black oxide finish• 3/8” square drive is rated for a
maximum torque of 90 ft-lbs15-8380 $53.99
BIKEMASTER®
1/4” DRIVE T-HANDLE SET• Made of heat-treated vanadium steel• Comes with 6, 8, 10, 12, 14mm and
#2 phillips socket15-1546 $11.95
BIKEMASTER®
3/8” DRIVE T-HANDLE SET • Made of heat-treated vanadium steel• Comes with 8, 10, 12, 13, 14, 17mm
and #2 phillips socket15-1547 $14.95
TOOLS
TOOLS & SUPPLIES
TOOLS & SUPPLIES
883
SEE CATALOG UPDATES AT
SPORT BODY
UTILITY BODY
SEATS &GRAPHICS
CONTROL
FUEL & AIR
ELECTRICAL
TIRES
TIRE/WHEELKITS
WHEELS
BRAKE
DRIVE
SUSPENSION
BEARINGS
EXHAUST
HARD & SOFTLUGGAGE
DUCKSUNLIMITED®
HUNTING
AG &FARMING
PLOW
WINCH
UTV
ENGINE
GENERALACCESSORIES
RAMPS &TIEDOWNS
CHEMICAL
TOOLS &SUPPLIES
DISPLAY &PROMO
CROSSREFERENCE
MOTION PRO®
GRIP CUTTERS• Steel construction with E-coating• Knurled handle for sure grip• Heat treated cutting shoes with beveled
edges insure a clean cut and longservice life
• Individual sizes for throttle tubes andhandlebar ends
• Perfect for installation of hand guardson offroad bikes
• Packaging includes tube for convenienttool storage
15-8335 $25.99
BIKEMASTER®
3/8” DRIVE IMPACT DRIVER• Removable 3/8” head • Can be used with standard or deep
3/8” drive sockets or extensions• 2 flat and 2 phillips bits included15-0625 $18.95
RASHANDLEBAR GRIP TOOL™
• The fast and easy way to install or remove handlebar grips
• No cutting and no mess• Works with any compressed air source• Sold as a pack of 4, retail priced
individually15-1202 $28.95
BIKEMASTER®
HEAVY DUTY FLEX MAGNETPICK-UP TOOL• Flexible shaft holds shape • Retrieve at hard-to-reach angles and
around obstructions • Will lift over 3 lbs15-1537 $14.95
MOTION PRO®
MAGNETIC FINGER GLOVE• Holds small metal objects• Great for starting or removing fasteners
in hard to reach places• 2-way stretch spandex• Leatherette bottom and fingertip• Stretch finger panels• Card of 6, priced individually15-0491 $10.99 ea.
MSR®
6-IN-1 SCREWDRIVER• Fits conveniently into fanny packs• 2 phillips and 2 flat blade screwdriver
SPOON-TYPE TIRE IRON• Featuring a 10.5” long handle with
curved end to fit hand better• Silver zinc finish• Sold individuallyDescription P/N RetailSingle 15-8115 $13.99Set of Two 15-8409 27.99
ULTIMATE MIGHTY TIRE IRON• The wide “spoon” area is carefully
radiused to ensure smoothness and prevent accidental tube nicks
• Measures 15” in length33-0001 $29.95
MOTION PRO®
T-6 COMBO LEVER32MM ADAPTER• Allows your T-6 Combo Lever to be
used as your primary 3/8” driver• 3/8” drive male with 1/4” drive female• For use with sockets for smaller front axles• Lightweight billet 7075 T-6 aluminum
with chrome vanadium steel insert• Features lightening holes• Coin knurled to facilitate turning sockets
by hand• Blue anodized finish15-8370 $17.99
15-8284
MOTION PRO®
T6 TIRE LEVERS• Lightweight forged 7075 T-6
aluminum construction• Hard anodized finish• Tire spoon on one end and
hex wrench on the other• Perfect size for any fanny packDescription P/N RetailT6 Tire Iron Combo Wrench
to 0.660mm/0.026”• 95mm long taper blades, hardened
and polished 15-1525 $5.95
BIKEMASTER®
20-BLADE METRIC FEELERGAUGE SET• Contents: 0.05-1.0mm• 100mm long blades, hardened
and polished 15-1526 $6.95
BIKEMASTER®
32-BLADE DUAL READINGCOMBINATION FEELERGAUGE SET• Dual marked 0.03mm/0.001” to
1mm/0.040”• 95mm long taper blades, hardened
and polished 15-1527 $8.95
MOTION PRO®
TAPPET FEELER GAUGES• Angled blade for easy access to tappets• Sold by card (6 pcs)P/N Size Retail15-8052 .002”/.003” $27.6915-8053 .004”/.005” 27.9915-8054 .006”/.008” 27.99Assorted15-0826 Set $27.99(2 Each of Above Sizes)
MOTION PRO®
TIMING PLUG WRENCH • For straight-slot timing plugs• Designed for hard-to-get timing plugs• 16mm, 22mm, and 38mm blade sizes 15-8087 $22.99
MOTION PRO®
TAPPET ADJUSTMENTWRENCH SET• Chrome-plated, heat-treated steel• Fits any screw-type tappet adjuster with
8mm, 9mm or 10mm adjusting nutcombined with either a 3mm, 4mm,square or straight screwdriver typeadjusting screw
• Interchangeable parts allows for 9 different combinations
15-0460 $43.99
MOTION PRO®
DEGREE WHEEL• Manufactured from .052” thick
aluminum with a 6-3/4” diameter and a 6mm center hole
• Used for checking ignition and camshaft timing
15-8092 $20.99
34-2110
34-2111
TOOLS
TOOLS & SUPPLIES
TOOLS & SUPPLIES
889
SEE CATALOG UPDATES AT
SPORT BODY
UTILITY BODY
SEATS &GRAPHICS
CONTROL
FUEL & AIR
ELECTRICAL
TIRES
TIRE/WHEELKITS
WHEELS
BRAKE
DRIVE
SUSPENSION
BEARINGS
EXHAUST
HARD & SOFTLUGGAGE
DUCKSUNLIMITED®
HUNTING
AG &FARMING
PLOW
WINCH
UTV
ENGINE
GENERALACCESSORIES
RAMPS &TIEDOWNS
CHEMICAL
TOOLS &SUPPLIES
DISPLAY &PROMO
CROSSREFERENCE
VECTOR OPEN BARREL TERMINAL TOOL• A 5-station crimper for most open
barrel terminals found on motorcyclesand ATVs
15-1303 $23.99
VECTOR WIRE TOOL• Crimps spark plug distributor and
coil terminals• Strips 7mm and 8mm ignition wire plus
10-18 AWG15-1304 $28.99
NGK CABLE SPLICER• Splices NGK cables to sealed CDI systems• Saves the expense of replacing the
entire ignition system38-1024 $6.95
BIKEMASTER3-WAY PLUG WRENCH• Fits all 10, 12, and 14mm spark plugs • Sold individually; for box order 1015-0335 $6.95
MOTION PRO®
SPARK PLUG SOCKET• The socket is designed to fit into the
plug cavity and allow the user to choosebetween the Motion Pro spark plugratchet wrench, a 3/8” ratchet or13/16” wrench as well as a tool kit baror phillips screwdriver through a8.5mm hole for removal and installation
• Will work on bikes and ATVs with18mm spark plugs
15-8175 $22.99
MOTION PRO® RATCHET SPARK PLUG WRENCH• Made specifically for water-cooled
2-stroke motorcycles and ATVs• Easier installation and removal of
the spark plugs• Use 1 side for installation• Flip it over for removal15-8147 $18.99
MOTION PRO® 4-STROKESPARK PLUG TOOL• Specially designed for water-cooled
4-strokes with 5/8” plugs• 2-step extension, swivel or fixed• Socket can be used with a screwdriver
to hold the front 19mm hex axles of latemodel 4-strokes
15-8239 $22.99
KASTAR EZ GRIPPLUG GAP GAUGE • Pocket clip feature keeps ramp gauge
at fingertips• Ramp gauge covers all spark plug
gapping requirements from .020” to .080”
• Metric gapping scale shown on reverse side
• Specially designed recess to adjustground electrodes
15-1210 $5.95
MOTION PRO®
IGNITION SYSTEM TESTER• Tests the integrity and strength of
ignition system• Spark gap is adjustable from 0 to 10mm• The larger the gap your ignition will
jump, the stronger your system is15-8122 $11.99
MSR®
WATER-COOLED PLUGWRENCH• Low-profile design for easier access34-2110 $7.95
MSR®
STANDARD SPARK PLUGWRENCH • Standard design for open areas 34-2111 $5.95
BIKEMASTER®
WIRE STRIPPERS• Strips 4 insulation or wire diameter:
1.0, 1.6, 2.0 and 2.6mm• Fast and clean removal of insulation• Automatic clamping and length gauge
hand grips• Adjustable ratchet mechanism• Comes with 3 removable
stripping/crimping die type jaws• 1 for 7-9mm spark plug wires and
2 styles for primary wire terminals21-0782 $75.95
TOOLS
ATV • TUCKER ROCKY DISTRIBUTINGNEW PART NUMBERS ARE RED • ALSO SEE OUR 2007 APPAREL CATALOGTOOLS & SUPPLIES
TOOLS & SUPPLIES
890
SPORT BODY
UTILITY BODY
SEATS &GRAPHICS
CONTROL
FUEL & AIR
ELECTRICAL
TIRES
TIRE/WHEELKITS
WHEELS
BRAKE
DRIVE
SUSPENSION
BEARINGS
EXHAUST
HARD & SOFTLUGGAGE
DUCKSUNLIMITED®
HUNTING
AG &FARMING
PLOW
WINCH
UTV
ENGINE
GENERALACCESSORIES
RAMPS &TIEDOWNS
CHEMICAL
TOOLS &SUPPLIES
DISPLAY &PROMO
CROSSREFERENCE
MOTION PRO®
SPRING HOOK• Will remove exhaust pipe springs, tank
or seat hold-in springs, cotter pins andmany other hard-to-access parts
06-8065 $9.99
MOTION PRO®
HEAVY DUTY SPRING HOOK• Specifically designed to handle large
diameter side-stand springs 15-8127 $16.99
MSR® QUIKSTEEL &QUIKALUMINUM• Steel hard in 20 minutes (15 minutes for
QuikAluminum)• No waste. Break off only what is needed• Self-contained hardener• Break off, knead and applyDescription P/N RetailQuiksteel 34-0339 $4.95QuikAluminum 34-0333 5.95
PRE-LOAD SPANNER WRENCH• 3/8” drive designed to easily adjust
shock pre-load rings• Ratchet not included07-0636 $7.95
NOLEEN FORK TRAVEL GAUGE• Easily measures the amount of fork travel19-6254 For case order 12 $6.95
NOLEEN PRO FORK OIL GAUGE• Aluminum constructed gauge which offers a unique measuring
scale on the siphon tube that adjusts from 0 to 200mm in oil level height
• The scale makes it easy to set quick, accurate adjustments on oil levels without the use of additional measuring tools
19-6250 $99.95
NOLEEN PRO FORK OIL SYRINGE• Give the user the opportunity to raise oil levels in forks without
having to disassemble them• Easily adds up to 20cc of oil in the fork19-6251 For case order 12 $6.95
NOLEEN RIDE HEIGHT TOOL• Can be used on big bore to mini bikes with its special
adjustability• Red anodized with a scale that is etched into the tool• Measures from 0 to 130mm19-6253 For case order 24 $29.95
NOLEEN SHORTY FORK ADJUSTER DRIVER• Fits easily underneath the handlebars to adjust KYB rebound
or Showa compression19-6252 For case order 12 $14.95
NOLEEN J6 SF3 GREASE• All purpose seal grease designed to provide lubrication and
anti-stiction to water pump, fork seals, and shock seals• Prolongs the life of seals and will withstand temperatures
up to 300˚19-6255 For case order 6 $4.95
PARK TOOL USASTEERING RACE REMOVER• This tool makes head tube bearing race removal easy• Tool is pulled through the steering tube until the flared ends snap in
behind the race• A blow from a hammer on the tool head removes the race• Fits most brands with 35-55mm bearing races15-1250 $32.99
NOLEEN SHOCK PUNCH• The shock punch has a long, thick shaft so you can easily reach
into the lock ring on your shock• The punch handle is constructed of stainless steel and the shaft
is heat-treated for long life19-6257 $29.95
NOLEEN ATV RIDE HEIGHT TOOL• The ride height tool is uniquely
designed to fit under your quad tomake an easy ride height measurement
• This is critical for properly setting upyour quad for motocross, TT or desert
19-6258 $99.95
GAUGES
ATV • TUCKER ROCKY DISTRIBUTINGNEW PART NUMBERS ARE RED • ALSO SEE OUR 2007 APPAREL CATALOGTOOLS & SUPPLIES
TOOLS & SUPPLIES
892
SPORT BODY
UTILITY BODY
SEATS &GRAPHICS
CONTROL
FUEL & AIR
ELECTRICAL
TIRES
TIRE/WHEELKITS
WHEELS
BRAKE
DRIVE
SUSPENSION
BEARINGS
EXHAUST
HARD & SOFTLUGGAGE
DUCKSUNLIMITED®
HUNTING
AG &FARMING
PLOW
WINCH
UTV
ENGINE
GENERALACCESSORIES
RAMPS &TIEDOWNS
CHEMICAL
TOOLS &SUPPLIES
DISPLAY &PROMO
CROSSREFERENCE
CAMEL LOW PRESSURETIRE GAUGE• Calibrated to 20 lbs. in 1/2 lb. units15-1403 $9.95
BIKEMASTER®
PEN TYPE TIRE GAUGE• Graduated 0-20 psi in 1/2 lb. increments• Chrome-painted brass body• Easy to read• Sold as a 3-pack15-1501 $7.99
BIKEMASTER®
DIGITAL TIRE GAUGE• Range from 0-100 psi• One button operation• Easy to read• Digital accuracy• Automatic shut-off after 15 seconds• Includes battery15-1502 $16.99
BIKEMASTER®
DIAL GAUGE• Swivel angle chuck with air release valveDescription P/N Retail0-15 psi in 1/4 lb. Increments 15-1505 $13.990-60 psi in 1 lb. Increments 15-1506 11.99
BIKEMASTER®
DIAL GAUGE WITH HOSES• Swivel angle chuck with air release valve• Braided hose & extension bar angle chuckDescription P/N Retail0-15 psi in 1/4 lb. Increments 15-1503 $22.990-60 psi in 1 lb. Increments 15-1504 20.99
AUTOMETER®
TIRE GAUGE• 0-60 psi with peak hold42-1034 $33.95
STANDARD ACCU-GAGE• Precision tire gauge with swivel chuckDescription P/N Retail0-15 psi in 1/4 lb. incr. 15-0253 $14.990-60 psi in 1 lb. incr. 15-0252 11.99
ACCU-GAGE WITH HOSE• Accurate stop, hand pressure reading• Push-button valve bleeds off
and glue for over 100 repairs• Not to be used on 2-wheel vehicles15-0265 $45.99
HELIX®
BRAKE/CLUTCH TUBING• Corrosion resistant reservoir tubingDescription P/N Retail.125 I.D. x 10 ft. 53-0792 $36.95.188 I.D. x 10 ft. 53-0793 38.95.250 I.D. x 10 ft. 53-0781 45.95
Transfer Hose
QUADBOSS TIRE SEALANT• Seals up to 1/2” puncture
in the tread and 1/4” puncture in the sidewall
• Stops bead leak and pinhole leaks in rims
• Will not solidify or freeze (above -33˚F)
• Will not rust steel, corrode aluminum wheels or clog valve core
• Completely biodegradable and water-soluble
• Works for the life of the tire• For use in offroad motorcycles and ATVsDescription P/N Retail8 oz. Bottle 53-0847 $5.9916 oz. Bottle 53-0848 8.9532 oz. Bottle 53-0850 13.951 Gal. 53-0849 49.955 Gal. Pail 53-0855 299.99Pump - 5 Gal. 53-0860 129.9955 Gal. Drum 53-0856 3299.99Pump - 55 Gal. 53-0861 209.99
BIKEMASTER®
INFLATE-IT“AIR COMPRESSOR IN A CAN”• Small compact can is easy to carry
and store• Use what you need and save the rest
until you need it• Fills virtually anything containing air• Non-explosive, non-flammable• Contains no CFCs, environmentally
friendly• Contains no messy sealant• 2.75 oz. air can15-0271 $5.39
BATTERY VENT TUBING• Vent tube for all batteries• Cut tube to proper length• Length 29-1/2”• Sold individually15-0504 $1.27
MOTION PRO®
BATTERY OVERFLOW CATCH TANK• Protect paint and chrome from
over-flow battery acid• Catch tank insures against acid
overflow damage while still properlyventing the battery
• Includes tank, cable ties and tubing06-1007 $7.99
PULLERS
ATV • TUCKER ROCKY DISTRIBUTINGNEW PART NUMBERS ARE RED • ALSO SEE OUR 2007 APPAREL CATALOGTOOLS & SUPPLIES
TOOLS & SUPPLIES
894
SPORT BODY
UTILITY BODY
SEATS &GRAPHICS
CONTROL
FUEL & AIR
ELECTRICAL
TIRES
TIRE/WHEELKITS
WHEELS
BRAKE
DRIVE
SUSPENSION
BEARINGS
EXHAUST
HARD & SOFTLUGGAGE
DUCKSUNLIMITED®
HUNTING
AG &FARMING
PLOW
WINCH
UTV
ENGINE
GENERALACCESSORIES
RAMPS &TIEDOWNS
CHEMICAL
TOOLS &SUPPLIES
DISPLAY &PROMO
CROSSREFERENCE
15-0620
15-0621
15-0640
15-0612
15-0601
15-0641
MOTION PRO®
ATV BALL-JOINT SEPARATOR• Designed to separate the
knuckle-ball joints withoutdamage to the A-arm, balljoint stud or rubber boots
Thread Specifications P/N Retail and Type Thread Size15-0601 $10.95 Left Hand 27mm x 1.0mm Internal1
15-0640 35.95 Right Hand 35mm x 1.5mm External2
15-0620 27.95 Right Hand 30mm x 1.5mm External2
15-0612 9.95 Right Hand 16mm x 1.5mm Internal1
15-0630 27.95 Right Hand 30mm x 1.5mm External2
15-0606 8.95 Right Hand 14mm x 1.5mm Internal1
15-0621 10.95 Right Hand 20mm x 1.5mm Internal1
15-0628 37.95 Multi Pattern 6 Hole Disc 8mm Bolts15-0641 49.95 Right Hand 35mm x 1.5mm External2
1 INTERNAL= Threads size inside of the engine part (Outside male threads on tool)2 EXTERNAL= Threads size outside of the engine part (Inside female threads on tool)
CLUTCH PULLERS & CHAIN TOOLS
TOOLS & SUPPLIES
TOOLS & SUPPLIES
895
SEE CATALOG UPDATES AT
SPORT BODY
UTILITY BODY
SEATS &GRAPHICS
CONTROL
FUEL & AIR
ELECTRICAL
TIRES
TIRE/WHEELKITS
WHEELS
BRAKE
DRIVE
SUSPENSION
BEARINGS
EXHAUST
HARD & SOFTLUGGAGE
DUCKSUNLIMITED®
HUNTING
AG &FARMING
PLOW
WINCH
UTV
ENGINE
GENERALACCESSORIES
RAMPS &TIEDOWNS
CHEMICAL
TOOLS &SUPPLIES
DISPLAY &PROMO
CROSSREFERENCE
D.I.D CHAIN CUT& RIVET TOOL• Combination chain cutter and riveting
tool built into one• Eliminates the problems of over
riveting or riveting pinheads off center• The body strength is over 10 times
stronger than the previous model• One third the size and about half the
weight of the previous modelDescription P/N RetailChain Cut/Rivet Tool 12-1292 $210.56Replacement Pin 12-1293 25.62
EPI ATV CLUTCH TOOLS• Fits all Polaris ATVs• Fits P85 and P90 primary clutches• Meets or exceeds OEM quality• Fits Kawasaki 300 & 400 Prairie 2x4 and 4x4,
RK CHAIN CUTTER AND PRESS FITRIVET TOOL• Cuts chain to length• Press fits side plates to proper depth• Either clip or rivet type• Flares holes in pins on rivet linksDescription P/N RetailCutter Rivet Tool 60-1216 $134.99Flare Pin 60-1217 9.99
BIKEMASTER®
CHAIN BREAKER• Heat treated• For #25 to #60 chains• Replacement tip includedDescription P/N RetailChain Breaker 15-1523 $19.95Replacement Tip 15-1524 2.95
EPI PREMIUM PRIMARY & SECONDARYCLUTCH PULLERS• The highest quality puller on the market• Precise machining on every model puller for accuracy• Manufactured from the highest quality steel and heat-treated
for superior strength• Tool used to pull drive clutch off machine• Individually packaged with instructions included• All pullers are 1-piece style
ARCTIC CAT Year P/N Retail650 4x4 V2 04-06 98-0393 $34.95
KAWASAKIPrairie All 98-0393 $34.95650/750 Brute Force All 98-0393 34.95700 V-Force All 98-0393 34.95Mule 3000 Series All 98-0393 34.95
ATV • TUCKER ROCKY DISTRIBUTINGNEW PART NUMBERS ARE RED • ALSO SEE OUR 2007 APPAREL CATALOGTOOLS & SUPPLIES
TOOLS & SUPPLIES
896
SPORT BODY
UTILITY BODY
SEATS &GRAPHICS
CONTROL
FUEL & AIR
ELECTRICAL
TIRES
TIRE/WHEELKITS
WHEELS
BRAKE
DRIVE
SUSPENSION
BEARINGS
EXHAUST
HARD & SOFTLUGGAGE
DUCKSUNLIMITED®
HUNTING
AG &FARMING
PLOW
WINCH
UTV
ENGINE
GENERALACCESSORIES
RAMPS &TIEDOWNS
CHEMICAL
TOOLS &SUPPLIES
DISPLAY &PROMO
CROSSREFERENCE
MOTION PRO®
QUAD STAKE CHAIN RIVET KIT• Use in conjunction with 15-8135 Jumbo
Chain Tool• Sold separately from 15-813515-8142 $19.99
MOTION PRO®
MASTERLINK PLIERS• Simplify installation and removal
of clip-type masterlinks• 1 tip is shorter and notched to be
placed on the pin while the other islonger to easily push the clip
15-8230 $28.99
MOTION PRO®
CHAIN BREAKER & RIVETING TOOL• Versatile enough to be used on cam
chains or drive chains• Will break chains from #35 to #630 • For chain 520 and up, it is
recommended to grind the rivet head• Each kit includes 3 pin sizes to fit most chains• Features new and improved
investment-cast, hardened body andredesigned body bolt
• Includes press plates (15-0123)• Recommended for light to medium-duty useDescription P/N RetailChain Riveting Tool 15-0122 $99.992mm Repl. Pin 15-8059 6.993mm Repl. Pin 15-8060 6.994mm Repl. Pin 15-8061 6.99Repl. Press Plates 15-0123 20.99Repl. Rivet Tip 15-8062 6.99
MOTION PRO®
CHAIN PRESS TOOL • Press-fit side plates on all 520-530 chain• Works on O-ring chain• Designed to install press-fit connecting links15-8066 $56.99Press Plates Only15-0123 $20.99Conversion Kit• Converts 15-8066 press tool kit into a
chainbreaker and riveting tool for 520,525 and 530 chains
15-8403 $32.99
MOTION PRO®
MINI CHAIN PRESS TOOL• Tool box size for pressing on press-fit
side plates • Fits all 520-530 chain• Includes hex key wrench06-8070 $13.99
MOTION PRO® CHAINALIGNMENT TOOL• Allows visual alignment of
sprocket for accurate alignment of drive chain and rear wheel
15-0125 $27.99
MOTION PRO®
CHAIN BREAKER• Heat-treated chrome
moly body• 4” long with folding handle • Fits chain sizes 420, 428, 520, 530,
and some 630• Replaceable pin is heat-treated and
hardened for long lifeDescription P/N RetailChain Breaker 15-0420 $31.99Replacement Tip 15-0421 3.99
THE GRUNGE BRUSH• The Grunge Brush enables you to clean
your chain with ease• The 3 side bristles allow you to clean all 4 sides
of your chain and the long bristle side lets you clean other parts of your bike likesprockets and wheels
• Regular component cleaning prevents premature wear and tear on chain andsprockets and assures smooth operation of the drive train
• The bristle blocks are adjustable to accommodate all sizes of chain• Brush available individually or with a mild degreaserDescription P/N RetailThe Grunge Brush 31-7121 $12.95The Grunge Brush w/cleaner 31-7120 14.95Replacement Block Set 31-7122 4.95
MOTION PRO®
T-6 CHAIN TOOL• For breaking 520-530 chain and
pressing on and off 520 and some 525 master-link side-plates
• Lightweight, 6 oz. including press platesand handle (8 oz. with pouch)
• Handle detaches for easy storage• To reduce weight further, an MP Tool,
8mm combination wrench or 8mm socketwith extension can be used as a handle
• Custom pouch with individual storagelocations including a pocket for extrachain/master links and a large accessory pocket
• This tool does not rivet master-link15-8358 $68.99
MOTION PRO®
JUMBO CHAIN TOOL KIT• Ultra heavy-duty tool for breaking and
riveting roller chain• Fits all 520, 525, 530, 630 standard
or O-ring type chain• Pushes the pin completely through the
chain link and rivets the same size chainwith the included rivet adapter
• Made from heat-treated, chrome molysteel and the extractor pin is firmly guided by a removable guide fitting for long pin life
• When bolted to a solid surface, air or electric wrench may be used to break chain
15-8135 $146.99Replacement Pin15-8235 $10.99
15-806615-0123
15-8403
SAFETY WIRE & CABLE TIES
TOOLS & SUPPLIES
TOOLS & SUPPLIES
897
SEE CATALOG UPDATES AT
SPORT BODY
UTILITY BODY
SEATS &GRAPHICS
CONTROL
FUEL & AIR
ELECTRICAL
TIRES
TIRE/WHEELKITS
WHEELS
BRAKE
DRIVE
SUSPENSION
BEARINGS
EXHAUST
HARD & SOFTLUGGAGE
DUCKSUNLIMITED®
HUNTING
AG &FARMING
PLOW
WINCH
UTV
ENGINE
GENERALACCESSORIES
RAMPS &TIEDOWNS
CHEMICAL
TOOLS &SUPPLIES
DISPLAY &PROMO
CROSSREFERENCE
HELIX®
STAINLESS STEEL CABLE TIES• Sold in packages of 5Size P/N Retail8” 53-0776 $9.9514” 53-0775 11.95
UNIFILTER CABLE TIES• Brightly colored 4, 8 and 11”
Pkg. of 50 Pkg. of 50 Pkg. of 50Color 11" 8" 4"Bright Blue 14-5323 14-5313 14-5303Bright Red 14-5322 14-5312 14-5302Hot White 14-5324 14-5314 14-5304Gloss Black 14-5321 14-5311 14-5301
20” SUPER DUTY CABLE TIES• Pack of 6• Releasable, reusable• Handles loads to 250 lbs.• Extra wide for added support53-0469 $10.95
MSR® CABLE TIES• Light weight with very high tensilestrength• Black only• Sold in packages of 100 piecesSize P/N Retail4” 34-2120 $3.955.5” 34-2121 5.957.5” 34-2122 8.9511” 34-2123 16.95
HELIX® RACING CABLE TIES• Bag of assorted sizes • 10 each of 4”, 6”, and 8” ties
FUEL LINE & FUSE KITS
ATV • TUCKER ROCKY DISTRIBUTINGNEW PART NUMBERS ARE RED • ALSO SEE OUR 2007 APPAREL CATALOGTOOLS & SUPPLIES
TOOLS & SUPPLIES
898
SPORT BODY
UTILITY BODY
SEATS &GRAPHICS
CONTROL
FUEL & AIR
ELECTRICAL
TIRES
TIRE/WHEELKITS
WHEELS
BRAKE
DRIVE
SUSPENSION
BEARINGS
EXHAUST
HARD & SOFTLUGGAGE
DUCKSUNLIMITED®
HUNTING
AG &FARMING
PLOW
WINCH
UTV
ENGINE
GENERALACCESSORIES
RAMPS &TIEDOWNS
CHEMICAL
TOOLS &SUPPLIES
DISPLAY &PROMO
CROSSREFERENCE
HELIX® RACING COLORED FUEL LINE• High quality transparent and solid fuel line• Resists weathering, kinking, tearing, abrasion and impact• Contains no plasticizers that cause hardening• Pre-packaged in 3 and 25 ft.• Measures 3/16” I.D. x 5/16” O.D. and 1/4” I.D. x 3/8” O.D.
and 5/16” I.D. x 7/16” O.D. and 1/2” I.D. x 3/8” O.D.
WIRE HARNESS, HOSE ANDCABLE CONDUIT• Made from the finest high temperature material• Highly flexible and pre-split for easy installation• 4 ft. long• Chrome• Sold individuallySize P/N Retail1/4” I.D. 45-9002 $15.993/8” I.D. 45-9003 15.991/2” I.D. 45-9004 15.99
BLACK WIRE LOOM CONDUIT• 4 ft. long• 1/2” I.D.45-9014 $1.99
MOTION PRO® METRICOFFROAD HARDWARE KIT• Kit contains a selection of grade 5, zinc-finished
nuts, bolts and washers most commonly neededfor trail or offroad repair
• Covers body pieces to kick starter bolts• Compact kit (11” x 6”) can be easily stowed in
your car, truck, trailer or toolbox15-1100 $65.99
PAN HEAD SCREWS• Order by pack (10/Pk)ISO/metric, phillips headSize Pitch P/N Retail5 x 10mm .8 73-3510 $5.995 x 12mm .8 73-3512 5.995 x 16mm .8 73-3516 6.995 x 20mm .8 73-3520 6.995 x 25mm .8 73-3525 6.995 x 30mm .8 73-3530 6.996 x 8mm 1.0 73-3608 5.996 x 12mm 1.0 73-3612 5.996 x 16mm 1.0 73-3616 5.996 x 18mm 1.0 73-3618 6.996 x 20mm 1.0 73-3620 6.996 x 25mm 1.0 73-3625 6.996 x 30mm 1.0 73-3630 6.996 x 35mm 1.0 73-3635 7.996 x 40mm 1.0 73-3640 7.996 x 45mm 1.0 73-3645 8.996 x 50mm 1.0 73-3650 9.996 x 60mm 1.0 73-3655 9.99
METRIC COTTER PIN ASSORTMENT • 880 piece assortment• 11 sizes for a complete assortment05-5006 $39.95
QUADBOSS ACCESSORYVINYL TIPS • Fits all QuadBoss ramps• Adds tailgate protection• Order individually, 4 are required
per ramp56-0048 $1.49
FLAT WASHERS• Order by pack (10/Pk)Size P/N Retail4mm 73-1004 $1.995mm 73-1005 1.996mm 73-1006 2.998mm 73-1008 2.9910mm 73-1010 2.9912mm 73-1012 3.99
K&N® REINFORCED RUBBER WASHERS• 2-ply 1/8” rubber washers are fiber
reinforced• Order by the cardSize P/N Retail1/4” x 1” (10/Pk) 40-2050 $68.955/16” x 1-1/4” (8/Pk) 40-2051 68.95
6MMX25MM FENDER WASHERS• Pack includes ten 1” (25mm)
steel washers • For use with 6mm bolts (not included)73-2625 $2.99
8MMX35MM FENDER WASHERS• Pack includes ten 1-3/8”, (35mm)
steel washers• For use with 8mm bolts (not included)73-2825 $3.99
CHRIS PRODUCTS SAFETY REFLECTORS• Adhesive or screw-on• 2” round• Made in the USA• Sold individuallyDescription Style P/N RetailAmber Screw-on 22-3801 $4.95Red Screw-on 22-3802 4.95Amber Adhesive 22-3803 4.95Red Adhesive 22-3804 4.95
LOCK WASHERS• Order by pack (10/Pk)Size P/N Retail4mm 73-2004 $2.995mm 73-2005 2.996mm 73-2006 2.998mm 73-2008 3.9910mm 73-2010 3.9912mm 73-2012 5.99
6” MAGNETICTRAY• Stainless steel• Keeps small parts
STAINLESS STEEL MINI-CLAMPSDescription P/N RetailFits 7/32” to 5/8” 60-3518 $4.25Qty. 10 per pack
FUEL & UTILITY JUGS
TOOLS & SUPPLIES
TOOLS & SUPPLIES
901
SEE CATALOG UPDATES AT
SPORT BODY
UTILITY BODY
SEATS &GRAPHICS
CONTROL
FUEL & AIR
ELECTRICAL
TIRES
TIRE/WHEELKITS
WHEELS
BRAKE
DRIVE
SUSPENSION
BEARINGS
EXHAUST
HARD & SOFTLUGGAGE
DUCKSUNLIMITED®
HUNTING
AG &FARMING
PLOW
WINCH
UTV
ENGINE
GENERALACCESSORIES
RAMPS &TIEDOWNS
CHEMICAL
TOOLS &SUPPLIES
DISPLAY &PROMO
CROSSREFERENCE
5 Gallon
2.5 Gallon Quick FillHose 24”15-0180
OMEGA UTILITY JUGS D.O.T. APPROVED• Square design eliminates unusable space around jug• White nylon cap uses rubber O-ring for a better seal• Outside of jug has a guide to determine contents remaining• Optional quick fill hose comes with a sediment screen• 1-year manufacturer’s warranty• Quick fill hose must be ordered separately
FILL HOSE VALVE ASSEMBLY• On/Off valve allows you to control the flow• Braided nylon hose prevents kinks• Fits spacesaver jug caps15-0063 $20.95
SPACESAVER UTILITY JUGS • Larger and wider gasket seat• New reinforced neck• Heavier wall thickness• New reinforced bottom• Glossy finish• CNC machined threads in lidsColor P/N RetailWhite - 5 Gallon 15-2000 $36.95Red - 5 Gallon 15-2001 36.95Blue - 5 Gallon 15-2002 36.95Yellow - 5 Gallon 15-2003 36.95Orange - 5 Gallon 15-2004 36.95Purple - 5 Gallon 15-2005 36.95Black - 5 Gallon 15-2006 36.95Dark Blue - 5 Gallon 15-2009 36.95Fill hose 18” 15-0025 7.95Lid Gasket Replacement 15-0027 3.99Poly Vent Replacement 15-0028 1.39Lid 3/4” Pipe Plug 15-0029 2.39Replacement Lid 15-0026 13.95Note: Fill hose and lid not compatible with other brands.
Color P/N RetailWhite 15-0085 $34.95Red 15-0086 34.95Blue 15-0087 34.95Purple 15-0088 34.95Teal 15-0089 34.95Yellow 15-0090 34.95Orange 15-0091 34.95Green 15-0092 34.95Black 15-0093 34.95Red 2.5 Gallon 15-0097 25.95White 2.5 Gallon 15-0098 25.95Quick Fill Hose 12” 15-0094 5.95Quick Fill Hose 24” 15-0180 9.95Quick Fill Hose 2.5 Gallon 15-0099 5.95Replacement Cap 15-0095 8.95Plug for Fill Hose 15-0096 1.29Fill hose & cap not compatible with other brands
Quick FillHose 12”15-0094
FUEL BIB• Complies with the Federal Clean Water
Act – no fuel spillage• 17”x 19” synthetic cloth absorbs gas and
oil but not water• Reusable• Convenient storage bag21-2016 $6.95
VP RACING CARB-COMPLIANT SPILL-PROOF PORTABLE GASOLINE CONTAINER• These containers are made to exceed
ASTM specifications and can be used to store or transport (with spout removed) gasoline or racing fuel that could be considered gasoline
• This container should not be used for nitro-methane, methanol, engine oil, traction compound or water
• Adheres to California Air Resources Board (CARB) standards• Currently, all states that require low permeation rates and
spill-proof systems will find this container acceptable• Note: These containers are intended for fueling offroad vehicles
only; as such, the spill-proof spout will not fit conventionalopenings for unleaded fuels in street vehicles
15-2020 $44.95Replacement Parts P/N RetailVP Replacement Cap 15-2021 $6.95Carb Compliant
Replacement Spout 15-2022 19.95
TUFF JUG• Grooved bottom helps prevent slipping in
your vehicle• Just push and pull. Fuel flows and shuts off
when removed• Pours 5-gallons in 68 seconds• Fuel shuts off when it reaches the end of the
spout• 1-gallon increments to determine fuel amount• Legal in all 50 states15-2025 $44.95
SHOP ACCESSORIES
ATV • TUCKER ROCKY DISTRIBUTINGNEW PART NUMBERS ARE RED • ALSO SEE OUR 2007 APPAREL CATALOGTOOLS & SUPPLIES
TOOLS & SUPPLIES
902
SPORT BODY
UTILITY BODY
SEATS &GRAPHICS
CONTROL
FUEL & AIR
ELECTRICAL
TIRES
TIRE/WHEELKITS
WHEELS
BRAKE
DRIVE
SUSPENSION
BEARINGS
EXHAUST
HARD & SOFTLUGGAGE
DUCKSUNLIMITED®
HUNTING
AG &FARMING
PLOW
WINCH
UTV
ENGINE
GENERALACCESSORIES
RAMPS &TIEDOWNS
CHEMICAL
TOOLS &SUPPLIES
DISPLAY &PROMO
CROSSREFERENCE
TORIN ROLLING WORKSTATIONS• Heavy gauge tubular construction• 2” ball bearing casters• Table dividers to separate nuts, screws and tools• Adjustable table height: 33” to 45”Description P/N RetailRolling Workstation 59-9356 $68.50Rolling Workstation w/cabinet 59-9355 146.95
59-9355
TORIN 3.5 GALLONPARTS WASHER• 3.5 gallon capacity• UL listed59-9354 $87.95
MSR®
CLEAN FUNNELS• Patented design featuring screw-on caps at both ends keeps
the inside clean and avoids oil spillage• Standard household-sized caps are easily replaced if lost or damaged• Larger funnels feature flexible tubes for easier pouringDescription Size P/N Retail#115 Blue, 1.0 Pt. 8.5” long, 15mm Standard Spout 34-0290 $5.99#320 Blue, 1.25 Qt. 10.5” long, 20mm Standard Spout 34-0291 6.99#420 Blue, 1.5 Qt. 14.25” long, 20mm Flexible Spout 34-0292 7.99#338 Blue, 1.3 Qt. 10.5” long, 38mm Standard Spout 34-0293 6.99#438 Blue, 1.6 Qt. 14.25” Long, 38mm Flexible Spout 34-0294 7.99
RATIO-RITE CUP• Fill measuring cup with oil to the
calibrated ratio mark• Ratios from 16:1 to 70:1 for 1.0, 2.0
and 2.5 gallons• Tough, polypropylene plastic• Perfect mixture every time15-0108 $4.95
RATIO-RITE LID• Custom fit lid• Fits the Ratio Rite cup• Keeps out contaminants15-0110 $2.95
MAXIMA QUICK-2 MIX BOTTLE• Tough clear polypropylene bottle• With graduations in oz. and cc’s
for precise measurements53-0906 $4.35
MAXIMA QUICK SPOUT• Flexible pouring spout that will screw on to the
Maxima 1/2 gallon and the 1 gallon bottles,(or any bottle with a 38mm neck)
• Comes with a cap on the small end so theQuick Spout can be left on the bottle duringstorage