TIPS TM Toolkit for integration of Petrophysics and Seismic
TIPSTM
Toolkit for integration of Petrophysics and Seismic
Just as the synthetic seismogram allows the interpreter to match the borehole properties to seismic, TIPS Multiple Modeler software provides the interpreter with similar tools when severe internal multiples are present. TIPS Multiple Modeler quickly quantifies the severity of the internal multiples by measuring as a function of time the properties of the short-period multiples: dispersion time delay, high-frequency loss, and attenuation. These parameters are highly desirable before data processing. In addition, the properties and time occurrence of long-period multiples are quantified for the interpreter.
The TIPS Well Log Modeler can produce high quality AVO synthetics with a few simple data preparation steps. TIPS will read your LAS file and lead you through the process to edit the data, create shale volume curves, estimated missing data and identify hydrocarbon zones. Within minutes of installing the software, you will be ready to produce models and iterate on numerous parameters to better understand your prospect.
TIPS Well Log Modeler
TIPS Multiple Modeler
What class of AVO response might you expect from a particular thin bed environment? How would the response differ if the sand bed were gas vs. water vs. oil? What impact does porosity have on a given bed? These questions, and many more, are quickly and easily answered using the TIPS Thin Bed Modeler.
TIPS software by HSB Geophysical
TIPS Thin Bed Modeler
TIPS software by HSB Geophysical is under the management of Chief Scientist Dr. Fred J. Hilterman.
15995 N Barkers Landing, Ste. 110Houston, Texas 77079 USA
Tel: 281-597-1429Fax: 281-597-1201
www.geotomo.com
VECONTM
TomoPlusTM
MiVuTM
GeoTomoTMGeoThrustTM