-1793 1 -1794 1 Toggle Clamps - Overview MISUMI toggle clamps are offered in a wide variety of shapes such as Hold Down Types (Vertical / Horizontal Handle) and Side Push Types. Suitable for inspection, welding, assembly and machining fixtures. Configurations Appearance When Clamped (Solid Line) / When Unclamped (Dotted Line) Features Mount Type * Hold Down Horizontal Handle Standard Handle · Low Profile Design · Selectable from Flange, Straight and Side Mount Types according to the installation space and the shape. Flanged Straight Side Standard Handle High Arm Type · High Arm Type · Arm positions higher than those of the conventional clamps eliminate the need for risers for taller workpieces. Flanged Long Handle · Longer handles provide more safety resulting in improved operability. Flanged Push-Pull Free Mounting Direction · Handles are mountable at any desired positions and angles. - Mounted with a bracket held by a hex nut and a threaded sleeve. Horizontal · Small clamps for light-duty operations. · Horizontally-moving handles are effective when there is an obstacle above. Flanged Hold Down Vertical Handle Standard · Most widely used in inspection and welding fixtures for automotive and aerospace industries. · 90°or more arm open-close angle* secures enough space to remove workpieces when unclamped. * Except MC04-6 series. · Selectable from Flange and Straight Types according to the installation space and the shape. Flanged Straight High Arm Type · High Arm Type · Arm positions higher than those of the conventional clamps eliminate the need for risers for taller workpieces. Flanged Two-Pronged Clamp Arms · Two clamping positions at a time enhance operability and save space. Flanged Long Arm · Long Arm · Suitable for clamping a workpiece from a distance. Flanged Straight Side Push Standard · Suitable for clamping a workpiece from the side. · Available in a wide range of clamping forces, strokes and mounting types including compact and lightweight types. Flanged Stroke Smooth · Suitable for clamping a workpiece from the side. · Built-in Oil Free Bushing requires no lubrication, and enables smooth strokes. Flanged Weld-On · Assembly-required Clamps. · Suitable for various purposes since arms and handles can be welded in desired angles. Flanged Straight Flanged Straight Side 2Selection Table For Clamping Force (Force to Hold Down), Distance to the Workpiece (Stroke, Arm Height and Length) and Material (Steel, Stainless Steel), refer to the information below and see each product page. * Mounted Views Tightening Force (N) Hold Down Side Push Material Part Number Page Arm Length Arm Height (from Mounting Surface) Stroke Shaft Height (from Mounting Surface) Main Body Steel Stainless Steel 196~5000 17.6~108.3 7.7~50 - - H H MC01-## P.1795~1797 P.1799, 1800 900~2270 56.9~71.65 41.6~54.1 - - H - MC01H-## P.1796 264~882 21~57 7.7~25 - - H - MC01L-## P.1798 900~3138 - - 20.34~66.7 - H H MC02-## P.1801 450~500 - - 16~17 10~12.7 H H MC03-## P.1801 294~4000 24~120 16~97 - - H H MC04-## P.1802, 1803 P.1804~1808 910 34.5 42.2 - - H - MC04H-2 P.1808 800~1500 150 50 - - H - MC05-1 P.1809 186~3700 51~264 16~88 - - H - MC04-#L MC04-#LS MC06-1 LN2BS P.1804, 1805, 1809 490~16000 - - 10~80 14~60 H H MC07-## P.1810~1813 1960 - - 30 20 H - MC08-1 P.1813 1960~9800 - - - - H - MC09-## P.1814
12
Embed
Toggle Clamps - Overview · 1-1793 1-1794 Toggle Clamps - Overview MISUMI toggle clamps are offered in a wide variety of shapes such as Hold Down Types (Vertical / Horizontal Handle)
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
-17931 -17941
Toggle Clamps - OverviewMISUMI toggle clamps are offered in a wide variety of shapes such as Hold Down Types (Vertical / Horizontal Handle) and Side Push Types. Suitable for inspection, welding, assembly and machining fixtures.
Configurations Appearance
When Clamped (Solid Line) / When Unclamped (Dotted
Line)
Features Mount Type *
Hold DownHorizontal
Handle
Standard Handle· Low Profile Design· Selectable from Flange, Straight and Side Mount Types according to the installation space and the shape.
FlangedStraightSide
Standard HandleHigh Arm Type
· High Arm Type· Arm positions higher than those of the conventional clamps eliminate the need for risers for taller workpieces.
Flanged
Long Handle· Longer handles provide more safety resulting in improved operability.
Flanged
Push-PullFree Mounting
Direction
· Handles are mountable at any desired positions and angles.
-Mounted with a bracket held by a hex nut and a threaded sleeve.
Horizontal· Small clamps for light-duty operations.· Horizontally-moving handles are effective when there is an obstacle above.
Flanged
Hold DownVertical Handle
Standard
· Most widely used in inspection and welding fixtures for automotive and aerospace industries.
· 90°or more arm open-close angle* secures enough space to remove workpieces when unclamped.
* Except MC04-6 series.
· Selectable from Flange and Straight Types according to the installation space and the shape.
FlangedStraight
High Arm Type
· High Arm Type· Arm positions higher than those of the conventional clamps eliminate the need for risers for taller workpieces.
Flanged
Two-Pronged Clamp Arms
· Two clamping positions at a time enhance operability and save space.
Flanged
Long Arm· Long Arm· Suitable for clamping a workpiece from a distance.
FlangedStraight
Side Push
Standard
· Suitable for clamping a workpiece from the side.· Available in a wide range of clamping forces, strokes and mounting types including compact and lightweight types.
Flanged
StrokeSmooth
· Suitable for clamping a workpiece from the side.· Built-in Oil Free Bushing requires no lubrication, and enables smooth strokes.
Flanged
Weld-On· Assembly-required Clamps.· Suitable for various purposes since arms and handles can be welded in desired angles.
FlangedStraight
Flanged Straight Side
2Selection Table
For Clamping Force (Force to Hold Down), Distance to the Workpiece (Stroke, Arm Height and Length) and Material (Steel, Stainless Steel), refer to the information below and see each product page.
* Mounted Views
Tightening Force (N)
Hold Down Side Push Material
Part Number PageArm Length
Arm Height (from Mounting
Surface)Stroke
Shaft Height (from Mounting
Surface)
Main Body
Steel Stainless Steel
196~5000 17.6~108.3 7.7~50 - - H H MC01-##P.1795~1797P.1799, 1800
900~2270 56.9~71.65 41.6~54.1 - - H - MC01H-## P.1796
264~882 21~57 7.7~25 - - H - MC01L-## P.1798
900~3138 - - 20.34~66.7 - H H MC02-## P.1801
450~500 - - 16~17 10~12.7 H H MC03-## P.1801
294~4000 24~120 16~97 - - H H MC04-##P.1802, 1803P.1804~1808
910 34.5 42.2 - - H - MC04H-2 P.1808
800~1500 150 50 - - H - MC05-1 P.1809
186~3700 51~264 16~88 - - H -
MC04-#LMC04-#LSMC06-1LN2BS
P.1804, 1805, 1809
490~16000 - - 10~80 14~60 H H MC07-## P.1810~1813
1960 - - 30 20 H - MC08-1 P.1813
1960~9800 - - - - H - MC09-## P.1814
-17951 -17961
Part Number MC01-1 MC01-S1
Body Material EN 1.0038 Equiv.EN 1.4301 Equiv.
Surface Treatment Trivalent Chromate -
Tightening Force (N) 264.6
Weight (g) 30
Arm Open-Close Angle 90°
Handle Open-Close Angle 75°
Accessory * Nylon Bolt Stainless Steel Bolt
Unit Price
Part Number MC01-2 MC01-S2
Body Material EN 1.0038 Equiv.EN 1.4301 Equiv.
Surface Treatment Trivalent Chromate -
Tightening Force (N) 264.6
Weight (g) 35
Arm Open-Close Angle 90°
Handle Open-Close Angle 75°
Accessory * Nylon Bolt Stainless Steel Bolt
Unit Price
Part Number MC01-2B
Body Material EN 1.0038 Equiv.
Surface Treatment Trivalent Chromate
Tightening Force (N) 400
Weight (g) 60
Arm Open-Close Angle 90°
Handle Open-Close Angle 75°
AccessoryBolt with Rubber
Material: NBRHardness: Shore A70
Unit Price
Part Number MC01-3 MC01-S3
Body Material EN 1.0038 Equiv.EN 1.4301 Equiv.
Surface Treatment Trivalent Chromate -
Tightening Force (N) 882
Weight (g) 130
Arm Open-Close Angle 85°
Handle Open-Close Angle 73°
AccessoryBolt with Rubber
Material: NBRHardness: Shore A70
* Stainless Steel Bolt
Unit Price
Part Number MC01-4 MC01-S4
Body Material EN 1.0038 Equiv.EN 1.4301 Equiv.
Surface Treatment Trivalent Chromate -
Tightening Force (N) 2352
Weight (g) 265
Arm Open-Close Angle 90°
Handle Open-Close Angle 65°
AccessoryBolt with Rubber
Material: NBRHardness: Shore A70
* Stainless Steel Bolt
Unit Price
Part Number MC01-10
Body Material EN 1.0038 Equiv.
Surface Treatment Trivalent Chromate
Tightening Force (N) 3400
Weight (g) 640
Arm Open-Close Angle 90°
Handle Open-Close Angle 68°
AccessoryBolt with Rubber
Material: NBRHardness: Shore A70
Unit Price
Part Number MC01H-3
Body Material EN 1.0038 Equiv.
Surface Treatment Trivalent Chromate
Tightening Force (N) 900
Weight (g) 150
Arm Open-Close Angle 85°
Handle Open-Close Angle 73°
AccessoryBolt with Rubber
Material: NBRHardness: Shore A70
Unit Price
Part Number MC01H-4
Body Material EN 1.0038 Equiv.
Surface Treatment Trivalent Chromate
Tightening Force (N) 2270
Weight (g) 290
Arm Open-Close Angle 90°
Handle Open-Close Angle 65°
AccessoryBolt with Rubber
Material: NBRHardness: Shore A70
Unit Price
Toggle ClampsHold Down, Horizontal Standard Handle (Flange Base) / High Arm Type (Flange Base)
(Clamped)
QFeatures: MC01-10 is larger than MC01-4 in size and clamping force. High Arm Type with an arm position higher than conventional products is adjustable without spacers. (MC01H-3: 16mm higher than MC01-3; MC01H-4: 19mm higher than MC01-4)
Toggle ClampsHold Down, Horizontal Standard Handle (Flange Base)
(Clamped) (Clamped)
(Clamped)(Clamped)
(Clamped)
(Clamped)(Clamped)
QFeatures: MC01-2B is the size between MC01-2 and MC01-3.
QHigh Arm Type (Flange Base) QHigh Arm Type (Flange Base)
Q��Hold Down, Horizontal Standard Handle (Flange Base)
Q��Hold Down, Horizontal Standard Handle (Flange Base)
Q��Hold Down, Horizontal Standard Handle (Flange Base)
Q��Hold Down, Horizontal Standard Handle (Flange Base)
Q��Hold Down, Horizontal Standard Handle (Flange Base)
Q��Hold Down, Horizontal Standard Handle (Flange Base)
Part Number
MC01-1
Part Number
MC01-10MC01H-3
MC01-1MC01-S1(Stainless Steel)
22
.9
18.25
11.1
2371
M4xP0.7
1.5 9.7
3
17
.3
(48
.3)
4-Oval 4.4x6.8
9.5
15
.93
.95
23
.8
23.8
3.9515.9
* Not a bolt with rubber.
1N=0.101972kgf
MC01-2MC01-S2 (Stainless Steel)
69.1
21.1
22
.9
1.5
M4xP0.7
5
15
.9
23
.8
7.95
13.5
15.9
23.8
3.953.95
3.9
5
17
.3
(48
.3)
7.7
6.8
4-Oval 4.4x6.82.42.4
* Not a bolt with rubber.
40
100.6
25
6.8
34
.6
(78
)
1.5
38
5
15
.93
.95
23
.8
32
2.4 2.4
11.1
15.9
23.8
M5xP0.8
4-Oval 4.4x6.8
23.8
MC01-2B * Please note that rubber is not attached to stainless steel bolt.MC01-3MC01-S3 (Stainless Steel)
4-Oval 5.5x6.3
M6xP1.0
2
44
(96
.8)
4
12
.7
56.9
143.5
25
.1
5 27 5
36
22
7.4
32
0.80.8
3
173
71.6
12.7
34.9
63(1
10.2
)
M8xP1.25
8.7
22.2
35
2.3 2.3
6.3 25.4 6.3
4-Oval 6.7x9
34
MC01-4MC01-S4(Stainless Steel)
* Please note that rubber is not attached to stainless steel bolt.
19
44.4
108.3
295.6
M10xP1.5
4
85
63
11
41.3
57.2
41.3
57.1
4-Ø8.3
(190.3)
MC01-10
1N=0.101972kgf
56.9
143.5
12.7
41.6
M6xP1.0
2
44
7.4
25.4
27
37
22
36
4-Oval 5.5x6.3
(113.4
)
32
MC01H-3
54.1
12.7
71.65
173
M8xP1.25
3
63
20.8
25.4
38
22.2
35
8.7
4-Oval 6.7x9.0
34
(128.6
)
MC01H-4
QHigh Arm Type Features (Comparison with Conventional Products)
Conventional Products
Raise with a spacer depending on workpiece heights.
Bolt
Spacer
Workpiece
High Arm Type
Height is adjustable by toggle clamp arms.
Bolt
Workpiece
-17971 -17981
Part Number MC01-1S
Body Material EN 1.0038 Equiv.
Surface Treatment Trivalent Chromate
Tightening Force (N) 264.6
Weight (g) 30
Arm Open-Close Angle 90°
Handle Open-Close Angle 75°
Accessory * Nylon Bolt
Unit Price
Part Number MC01-2S
Body Material EN 1.0038 Equiv.
Surface Treatment Trivalent Chromate
Tightening Force (N) 264.6
Weight (g) 35
Arm Open-Close Angle 90°
Handle Open-Close Angle 75°
Accessory * Nylon Bolt
Unit Price
Part Number MC01-3S
Body Material EN 1.0038 Equiv.
Surface Treatment Trivalent Chromate
Tightening Force (N) 882
Weight (g) 130
Arm Open-Close Angle 85°
Handle Open-Close Angle 73°
AccessoryBolt with Rubber
Material: NBRHardness: Shore A70
Unit Price
Part Number MC01-4S
Body Material EN 1.0038 Equiv.
Surface Treatment Trivalent Chromate
Tightening Force (N) 2352
Weight (g) 265
Arm Open-Close Angle 90°
Handle Open-Close Angle 65°
AccessoryBolt with Rubber
Material: NBRHardness: Shore A70
Unit Price
Part Number MC01L-1
Body Material EN 1.0038 Equiv.
Surface Treatment Trivalent Chromate
Tightening Force (N) 264.6
Weight (g) 35
Arm Open-Close Angle 90°
Handle Open-Close Angle 75°
Accessory * Nylon Bolt
Unit Price
Part Number MC01L-2
Body Material EN 1.0038 Equiv.
Surface Treatment Trivalent Chromate
Tightening Force (N) 264.6
Weight (g) 40
Arm Open-Close Angle 90°
Handle Open-Close Angle 75°
Accessory * Nylon Bolt
Unit Price
Part Number MC01L-3
Body Material EN 1.0038 Equiv.
Surface Treatment Trivalent Chromate
Tightening Force (N) 882
Weight (g) 140
Arm Open-Close Angle 85°
Handle Open-Close Angle 73°
AccessoryBolt with Rubber
Material: NBRHardness: Shore A70
Unit Price
Toggle ClampsHold Down, Horizontal Standard Handle (Straight Base)
(Clamped) (Clamped)
(Clamped) (Clamped)
Toggle ClampsHold Down, Horizontal Long Handle (Flange Base)
(Clamped) (Clamped)
(Clamped)
Q��Hold Down, Horizontal Standard Handle (Straight Base)
Q��Hold Down, Horizontal Standard Handle (Straight Base)
Q��Hold Down, Horizontal Standard Handle (Straight Base)
Q��Hold Down, Horizontal Standard Handle (Straight Base)
Q��Hold Down, Horizontal Long Handle (Flange Base)
Q��Hold Down, Horizontal Long Handle (Flange Base)
Q��Hold Down, Horizontal Long Handle (Flange Base)
Part Number
MC01L-1
Part Number
MC01-1S
* Not a bolt with rubber.MC01-1S
M4xP0.7
22
.9
11.1
23.8
71
2.42.418.25
23
4-Oval 4.4x6.8
13
.65
33
.95
9.5
1.5
3
(56
.2)
* Not a bolt with rubber.MC01-2S
22
.9
5
13.5
1.5
3
11
.75
3.9
56
.8
M4xP0.7
11.1
23.8
69.1
2.42.421.1
4-Oval 4.4x6.8
(56
.2)
MC01-3S
M6xP1.0
12
.73
7.9
7
5 2756.9 5
4-Oval 5.5x6.3
2
44
437
143.5
(10
9.7
)
7.4
(32)
MC01-4S
8.7
3
63
6
M8xP1.25
12
.74
8.3
6.4
4-Oval 6.7x9
20.8
6.3 25.471.6
173
6.3
(34)
(12
3.5
)
* Not a bolt with rubber.MC01L-1
9.7
3
4-Oval 4.4x6.8
M4xP0.7
9.5
15
.93
.95
23
.8
3.95
11.1
15.9
23.8
22
.9
1.5
83.5
18.2523
(60
.4)
* Not a bolt with rubber.MC01L-2
M4xP0.7
22
.9
7.7
6.8
81.721.1
5
15
.9
23
.8
7.95
13.5
15.9
23.8
3.953.953.9
5
2.42.44-Oval 4.4x6.8
(60
.4)
1.5
1N=0.101972kgf1N=0.101972kgf
MC01L-3
5 27 5
2
44
4
36
22
7.4
4-Oval 5.5x6.3
M6xP1.0
12
.72
5.1
163.856.9
32
(11
6.9
)
LCD
Workpiece
Inspection Fixture
Clamp for LCD Continuity Tests of Mobile Phones.
Long Handle Features (Comparison with Conventional Products)
QConventional Products QLong Handle
Pinch hazard! Long arm is safer to use, thus resulting in increased operability.
QFeatures: Welded Tip Type (MC04-10, MC04-11, MC04-12) allows a screw to be fixed at any desired position to be easily fit in fixture designs. High Arm Type (MC04H-2) is adjustable without spacers because it has an arm position 20mm higher compared to the conventional product (MC04-2).
(Clamped) (Clamped)
(Clamped) (Clamped)
Toggle ClampsHold Down, Vertical Handle, Welded Tip (Straight Base) / High Arm Type (Flange Base)
Q��Hold Down, Vertical Handle, Welded Tip (Straight Base)
Q��Hold Down, Vertical Handle, Welded Tip (Straight Base)
Q��Hold Down, Vertical Handle, Welded Tip (Straight Base)
Q��Hold Down, Vertical Handle,
High Arm Type
(Flange Base)
Q��Hold Down, Vertical Handle (Straight Base)
Q��Hold Down, Vertical Handle (Straight Base)
Q��Hold Down, Vertical Handle (Straight Base)
Q��Hold Down, Vertical Handle (Straight Base)
Part Number
MC04-7S Part Number
MC04-11MC04H-2
1N=0.101972kgf 1N=0.101972kgf
MC04-6S
5
43
.7
29
M4xP0.7
4.2
91424
2-Oval 4x6.5
4.1
6
11
.5
1.5
72
.742
(51)
MC04-7S
13
35.5
34 (67)
M6xP1.0
7
18
33
7.57.5
4-Ø6.2
125
63 3
Ø6.3
43.9
MC04-8S
16
57.5
63 (67)
86 M8xP1.25
8.5
24
439.59.54-Ø8.5
43
11
17
10.852.2
160
28
63 3
55
MC04-9S
16
49.5
72.5108.5 (132.5)
16M8xP1.25
8
1733
88
4-Ø6.2
52
915
212
6
3
153 3
MC04-10
9
248 8
40
13
16
36
50
11
5
90 (106)
10.5
4.54.5
8
35
17
6
9
16
Ø16
4-Ø 8.5
70
.3
M8xP1.25
MC04-11
48 10
3010 10
50 (174.5)
19
50
25
4.5
12.5
21.5
9
24
5
9
83 25
Ø19
4-Ø 9
M12xP1.75
MC04-12
50 (174.5)
19
25
120
97
12.5
21.5
9
294
4.5
9
83 25
M12xP1.75Ø19
MC04H-2
Ø6.4
4-Ø 5.2
9.6
42
.2
34.5
65.5 (54)
M6xP1.0
3
12
4
44
28.3
12.7
25.4
27
39
.7
-18091 -18101
Part Number MC05-1
Body Material EN 1.0038 Equiv.
Surface Treatment Trivalent Chromate
Tightening Force (N) 800~1500
Weight (g) 2000
Right and Left Travel Distance (mm) 40~80
Forward and back Travel Distance (mm) 60
Arm Open-Close Angle 140°
Handle Open-Close Angle 74°
AccessoryBolt with Rubber
Material: NBR Hardness: Shore A70
Unit Price
Part Number FTK
Body Material EN 1.0038 Equiv.
Surface Treatment Trivalent Chromate
Weight (g) 550
Toggle Clamp Arm Mounting Width
Max. 22Min. 16
Right and Left Travel Distance (mm) 40~70
Forward and back Travel Distance (mm) 17
Unit Price
Part Number MC06-1
Body Material EN 1.0038 Equiv.
Surface Treatment Trivalent Chromate
Tightening Force (N) 1000~3700
Weight (g) 1500
Arm Open-Close Angle 110°
Handle Open-Close Angle 90°
Accessory Steel Bolt
Unit Price
Part Number LN2BS
Body Material EN 1.0038 Equiv.
Surface Treatment Bright Chromate Plating
Tightening Force (N) 294~980
Weight (g) 500
Arm Open-Close Angle 140°
Handle Open-Close Angle 90°
Accessory Steel Bolt
Unit Price
Part Number MC07-1
Body Material EN 1.0038 Equiv.
Surface Treatment * Trivalent Chromate
Stroke (mm) 13.6
Tightening Force (N) 490
Handle93°
Open-Close Angle
Weight (g) 70
Accessory Steel Bolt
Unit Price* Shaft: Nickel Plating
Part Number MC07-2
Body Material EN 1.0038 Equiv.
Surface Treatment * Trivalent Chromate
Stroke (mm) 10
Tightening Force (N) 500
Handle66°
Open-Close Angle
Weight (g) 100
Accessory Steel Bolt
Unit Price
Part Number MC07-3 MC07-S3
Body MaterialEN 1.0038
Equiv.EN 1.4301
Equiv.
Surface Treatment * Trivalent Chromate -
Stroke (mm) 30
Tightening Force (N) 1960
Handle140°
Open-Close Angle
Weight (g) 370
Accessory Steel Bolt Stainless Steel Bolt
Unit Price* Shaft: Nickel Plating
Part Number MC07-4
Body Material EN 1.0038 Equiv.
Surface Treatment * Trivalent Chromate
Stroke (mm) 12
Tightening Force (N) 1568
Handle45°
Open-Close Angle
Weight (g) 460
Accessory Steel Bolt
Unit Price* Shaft: Nickel Plating
Part Number MC07-5
Body Material EN 1.0038 Equiv.
Surface Treatment * Trivalent Chromate
Stroke (mm) 12
Tightening Force (N) 1600
Handle45°
Open-Close Angle
Weight (g) 450
Accessory Steel Bolt
Unit Price* Shaft: Nickel Plating
Part Number MC07-6
Body Material EN 1.0038 Equiv.
Surface Treatment * Trivalent Chromate
Stroke (mm) 30
Tightening Force (N) 1960
Handle190°
Open-Close Angle
Weight (g) 390
Accessory Steel Bolt
Unit Price* Shaft: Nickel Plating
Toggle Clamps / Two-Pronged FittingsHold Down, Vertical Handle, Two-Pronged (Flange Base) / Long Arm (Flange Base)
Q��Hold Down, Vertical Handle, Long Arm, Small Type (Flange Base)
Q��Hold Down, Vertical Handle, Long Arm (Flange Base)
EBuilt-in Oil Free Bushing requires no lubrication.MC08-1
20
125 (136.5)
Ø12
42
Stroke 30
23
83
40 358
34
50
4-Ø6.5
3
99
.5
10
M8xP1.25
Depth 21
15
MC07-14
MC09-3MC09-2
MC09-1
R16
53
26.17
50.4
50
84
37.2
90
30.5
50.8
39.2
R25
16
3/8-24
16
47.6
164
7.1
7.1
Ø27.2
1502
8
97 28
16
28
125
75
100
55
82
4-Ø13.512
16.5
41.2
26
48
24
R13.5
30.2
29.8
20.2
30.5
R8
26.7
8
1/4-28
18
70
57 13
8
18
41
58
8.5
8.5
30
47
4-Ø8.58
30.5
8
94.9
5.4
5.4
Ø17.3
151.2
24.6
48.8
37.1
38
69
33.7
70
R12.5
40
40.3
13
3/8-24
13
41.5
132
6.7
6.7
25
100
25
77 23
13
60
80
40
60
4-Ø11.511.5
Ø21.4
150
Handle Movement Angle
Arm Movement Angle
MC09-2S
38
40
3040
4-Ø12 35
40.36
60
122452.8
35.75
21.55
2448.55
24.45
R12.5
54.5
13 66
151
3/8-24
Ø21.7
151.2
100
25
25
13
13
2377
Weld-On Clamps are composed of 4 parts shown to the left; handle, main body, base
and arm.
1Determine the mounting position of the main body.
2Determine the length of the control arm, then connect to the body arm by welding.
3Given space from the fixture for clamp mounting, determine the height of the
handle, and weld the handle and the body handle receiver.
4Determine the angle between the main body and the supporting plate, and weld
them together.
5Determine how to mount a clamp on to the fixture. If the base is used, weld the
base and the supporting plate together.
Assemble a Weld-On clamp as described above.
· Welding Clamps can be flexibly assembled depending on different working
situations, thus can be used in wide range of applications.
· Heat treatment (hardness 60HRC) ensures abrasion-resistant assembly of the pin
constituting the supporting point, and the surrounding bushing. The clamps are best
for fixtures that require frequent use or accuracy.
How to Use Welding Clamps for Various Applications
2
5
4
1
3
Base
Arm Receiver
Hold Down Arm
Pivot Plate
Handle Receptacle
Main Body Arm
Handle
Main Body
-18151 -18161
Components for Toggle ClampsTwo-Pronged Clamp Arms, Clamp Arm Extension Kits, Clamp Brackets
Q��Two-Pronged Clamp Arms
Q��Clamp Arm Extension Kits
QClamp Brackets
QTips (Standard)
QFeatures: Bolts for Toggle Clamps. In addition to the standard type, we offer a variety of types of bolts that are highly capable of resisting abrasion, or buffering impacts from a workpiece.
QTips (Universal)
QTips (Rubber Bolt with Springs)
Q� Tips (Rubber Bolt with Spring and Resin Pad)
(NBR)
QTips (Standard)
(Urethane)
Tips for Clamps
Part Number
MC4-32MCS6-37
Part Number - L - M - A
KJWCLC14KJCLA10KJCLB6
--
L60L100
--
6M6
- A6.5
M Material: EN 1.0038 Equiv.
M Material: EN 1.0038 Equiv.
M Material: EN 1.0038 Equiv. Black
TypeTip Bolt
MMaterial HHardness MMaterial SSurface Treatment
MC#-##NBR Shore A70
Steel Trivalent Chromate
MCS#-## Stainless Steel -
L
t t
d d
M
1 2
1
-
Part Number
M-L(Thread Effective Length)
L (O.A.L)
t1 t2 d d1 Unit Price
MC4-15 4-15 252 8 8 12
MC4-32 4-32 42
MC5-27 5-27 384 7 11.3 13.5
MC5-69 5-69 80
MC6-37 6-37 51
2 12 10 16MC6-62 6-62 76
MC6-87 6-87 101
MC8-45 8-44.5 63
3.5 15 12.5 19MC8-75 8-74.5 93
MC8-105 8-104.5 123
MC10-59 10-59 85 6 20 16 24
MC12-66 12-66 100 9 25 22 32
Part Number
M-L(Thread Effective Length)
L (O.A.L)
t1 t2 d d1 Unit Price
MCS4-15 4-15 25
28 8 12
MCS4-32 4-32 42
MCS6-37 6-37 51 12 10 16
MCS8-45 8-44.5 63 3.5 15 12.5 19
TypeTip Bolt
MMaterial HHardness MMaterial SSurface Treatment
TGUB Urethane* Shore A90 Steel Trivalent Chromate
* Excellent in abrasion resistance compared to NBR.* Gate marks from casting remain in urethane