6000 Jefferson Highway | Harahan, LA 70123 | PalmerSafetyUS.com Phone: (504) 733-1808 Fax: (504) 733-2996 PalmerSafetyUS.com TECHNICAL SPECIFICATIONS Tested as per ANSI Z359.1-2007 Anchorage Connector Locking Pin Griping disk. 10.43” Rubber Grips Tightening Handles 9.02” Direction of use. 22.74” 13.98” PN: A00002 Parapet Anchor Parapet Anchor. Galvanized Steel. 2.36′′ – 14.17′′ parapet range. Min breaking strength 5000 lbs. Meets or exceeds ANSI Z359.1-2007. DESIGN: • Anchor suitable to be installed on the parapet of a building such that the anchor point lies at the top on the outside facade of the building. • Suitable to be installed on varying thicknesses of a parapet. Width adjustment feature provided. • Tightening on to the parapet by use of rubber disks. MIN. WIDTH OF THE PARAPET ON WHICH INSTALLATION IS POSSIBLE: 2.36 in. MIN. WIDTH OF THE PARAPET ON WHICH INSTALLATION IS POSSIBLE: 14.17 in. MATERIAL: High strength alloy steel FINISH: Silver/yellow galvanized SYSTEM STRENGTH: Greater than 25 kN CONFORM TO NORM: Meets or exeeds ANSI Z359.1-2007 WEIGHT: 19.84 lbs. ± 0.22 lbs.