www.toolmex.com TMX NEW Annular Cutters Reduced Breakage... Improved Operator Safety...Less Time in the Cut Feature Benefits Fully Ground Flutes Better Chip ejection ID Taper Clearance for improved slug ejection Alternating end tooth geometry on even flute cutters More aggressive in the cut, can operate up to 15% faster Thinner wall construction Reduces the amount of material being removed which decreases the thrust of the cutter resulting in closer to size hole with less horsepower CNC manufacturing technology Consistent cutter geometry – cutter to cutter Metallurgical testing Ensures reliability of our proprietary Molybdenum M-2 steel Margin on cutting diameter Reduced rubbing in the cut results in less heat, better hole size and surface finish
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
www.toolmex.com
TMX NEW Annular Cutters Reduced Breakage...Improved Operator Safety...Less Timein the Cut
Feature Benefits
Fully Ground Flutes Better Chip ejection
ID Taper Clearance for improved slug ejection
Alternating end tooth geometry on even flute cutters
More aggressive in the cut, can operate up to 15% faster
Thinner wall constructionReduces the amount of material being removed which decreases the thrust of the cutter resulting in closer to size hole with less horsepower
CNC manufacturing technology Consistent cutter geometry – cutter to cutter
Metallurgical testingEnsures reliability of our proprietary Molybdenum M-2 steel
Margin on cutting diameterReduced rubbing in the cut results in less heat, better hole size and surface finish
NEW TMX Annular Cutters: • 3/4" shank with two flats to fit Weldon Style Shank Magnetic Drill presses • Cutters are interchangeable with other standard hole cutting systems
5-530-903 Ejector- Pilot, Short for 7/16" diameter cutter x 1" cutter depths 5.095-530-905 Ejector- Pilot, Short for all 1" cutter depths except 7/16" dia. 5.095-530-913 Ejector- Pilot, Long for 7/16" diameter cutter x 2" cutter depths 5.455-530-915 Ejector- Pilot, Long for all 2" cutter depths except 7/16" dia. 5.455-530-925 Ejector- Pilot, Extra-Long for all 3" cutter depths 12.73
Ejector Pilots
Annular Cutter Holders• For 1" depth of cutter
Annular Cutters• Straight, R8 or MT Shank• Holder shank allows different
machines to drive cutter• Easily reaches out of the