Did You Know You Can Go... From this... For About Half The Cost? To this...
www.meyerproducts.com© 2010 Meyer Products LLC. Form #3-545 081010M
Meyer Products, LLC / 18513 Euclid Ave. / Cleveland, Ohio 44112 / 216-486-1313 / Fax 216-486-1321
Meyer Products LLC reserves the right under its continuing product improvement program to change construction or design details and specifications without incurring any obligation.
Meyer® Face-Lift Program. The Meyer Face-Lift Program is available for the models listed below:
Did You Know You Can Go...
From this...
EZ-Mount Plus Mounted Plows
Classic Plow System to be
Replaced
Upgrade Classic Series to Pro Series (includes plow, pivot and A-frame)
Description NEW Package #
ST 7.0 / ST 7.5 /STL 7.5* Drive Pro - DP 7.5 09390
STP 7.5* Drive Pro Poly - DPP 7.5 09391
C 7.5 Lot Pro - LP 7.5 09392
C 8.0 Lot Pro - LP 8.0 09393
C 8.5 Lot Pro - LP 8.5 09394
C 9.0 Lot Pro - LP 9.0 09395
CP 7.5 Lot Pro Poly - LPP 7.5 09396
CP 8.0 Lot Pro Poly - LPP 8.0 09397
CP 8.5 Lot Pro Poly - LPP 8.5 09398
CP 9.0 Lot Pro Poly - LPP 9.0 09399
D 7.5 Diamond Edge - DE 7.5 09370
D 8.0 Diamond Edge - DE 8.0 09371
D 8.5 Diamond Edge - DE 8.5 09372
D 9.0 Diamond Edge - DE 9.0 09373
For About Half The Cost?
To this...
EZ-Mount Classic Mounted Plows
Classic Plow System to be
Replaced
Upgrade Classic Series to Pro Series (includes plow, pivot and A-frame)
Description NEW Package #
TM 5.0 Drive Pro - DP 5.0 09374
TM 6.0 Drive Pro - DP 6.0 09375
TM 6.5 / TML 6.5 /TMP 6.5/TMP 7.0
Drive Pro - DP 6.8 (Steel Only) 09376
ST 7.0 / ST 7.5 /STL 7.5*
Drive Pro - DP 7.5 09380
STP 7.5* Drive Pro Poly - DPP 7.5 09381
C 7.5 Lot Pro - LP 7.5 09382
C 8.0 Lot Pro - LP 8.0 09383
C 8.5 Lot Pro - LP 8.5 09384
C 9.0 Lot Pro - LP 9.0 09385
CP 7.5 Lot Pro Poly - LPP 7.5 09386
CP 8.0 Lot Pro Poly - LPP 8.0 09387
CP 8.5 Lot Pro Poly - LPP 8.5 09388
CP 9.0 Lot Pro Poly - LPP 9.0 09389
NoTe: If new angling rams are required use Part #07620 two (2) required. If new couplers are required - contact Meyer Products
* Select Face-Lift kit by vehicle size. Drive Pro and Drive Pro Poly 7.5 moldboard should be used only for 1/2 ton and smaller vehicles. Do not use DP 7.5 plows on vehicles 3/4 ton and larger. Replaces original equipment utilizing a 23.5” A-frame only. For ST Series plow systems using a 17.5” A-frame, please contact Meyer Products.
Optional UpdatesEZ-Mount Plus or Classic Mounted Plows Optional Equipment
Hydraulic Unit to be replaced New Hydraulic Unit Number Description Angling Rams if Required
1-1/2 X 10”Angling Rams if Required
1-1/2 x 12” Hoses (full set)
E47, E47H, E57, E57H, E60, E61H 15995* Meyer E58H Unit Only 07968 (2 required) 05437SP (2 required) 22461 (2 required)
* Assumes end-user will use existing harness and controller Controllers
Existing Change toRequired Parts, Classic Mounting Systems Required Parts, PLUS Mounting Systems
Controller Harness Controller Harness
Toggle Switches
Slick Stick 22092C 15680 N/A N/A
Touch Pad 22154 15764 N/A N/A
Pistol Grip 22690X 15764 N/A N/A
Joystick 22790X 15764 N/A N/A
Slick Stick
Touch Pad 22154 15764 22154 22610
Pistol Grip 22690X 15764 22690X 22610
Joystick 22790X 15764 22790X 22610
Touch PadPistol Grip 22690X Use existing 22690X Use existing
Joystick 22790X Use Existing 22790X Use Existing
LightsExisting Change to Required Parts Comments
Generic After Market Nite Saber I or II 07234/07550 Need unique truck light adapter
Truck Lights Nite Saber I or II 07234/07550 Need unique truck light adapter
Nite Saber 1 Nite Saber II 07549 Use existing truck light adapter
The Industry's Best Warranty Protection.
3 YEARS Standard*
5 YEARS On all structural steel*
www.meyerproducts.com
Upgrade now to a Pro Series and get your warranty extended.
Lot Pro shown with optional wings and deflector.
Upgrade to the best performing plows in the business for about half price.
22.5"
70° Attack Angle
(6'8" Length)
32"
75° Attack Angle
TM
31.5"
70° Attack Angle
Over the past few years, Meyer® started with a clean sheet of paper and completely redesigned their entire line of plows.
The result was a simplified design that creates a stronger, more durable plow. All components are joined
together using slot and tab construction – a sturdy and more precise way to fit steel together. Attack angles
and A-frames have been redesigned to increase strength, especially at key pressure
zones. Three reinforced points-of-contact and a tubular bar along
the entire back of the moldboard increase
torsional strength.
The pivot bar is constructed using heavy walled tubular steel for added strength and rigidity.
Pro Series plows utilize a larger king bolt that is 41% stronger and can withstand a load 2.4 times greater. Features easy-to-reach grease fitting for longer service life.
All Pro Series moldboards feature increased height and aggressive attack angles for excellent plowing performance.
* Register new plow online at
www.meyerproducts.com
to activate years 3 through 5.
Drive Pro moldboard
Diamond Edge bottom-trip moldboard
Upgrade to one of these Pro Series plows:
Meyer® knows our owners take pride in the appearance of their snowplowing vehicles, but we also know
times are tough and purchasing a new plow might be a strain on your budget. Thanks to Meyer’s innovative new
plow designs, it is now easy and affordable to upgrade from a Classic Meyer Plow to an all-new Meyer Pro Series
moldboard for about HALf tHE PRiCE of a NeW complete plow system.
Introducing the Meyer® Face-Lift Program:
Your Wallet Won’t Suffer. Your Appearance and Productivity Will Improve.
Here’s how the Face-Lift Program works:➜ Keep your current mount, hydraulic unit, controller and lights
➜ Purchase a new Meyer Pro Series moldboard and PAF which provide better performance with improved snow rolling action and aggressive attack angles
➜ Select the accessories you may want to add to your new plow including wings, curb guards or deflectors
➜ Receive the benefit of Meyer’s exclusive 3/5-year ROC warranty, the best in the business
The Industry's Best Warranty Protection.
3 YEARS Standard*
5 YEARS On all structural steel*
www.meyerproducts.com
Upgrade now to a Pro Series and get your warranty extended.
Lot Pro shown with optional wings and deflector.
Upgrade to the best performing plows in the business for about half price.
22.5"
70° Attack Angle
(6'8" Length)
32"
75° Attack Angle
TM
31.5"
70° Attack Angle
Over the past few years, Meyer® started with a clean sheet of paper and completely redesigned their entire line of plows.
The result was a simplified design that creates a stronger, more durable plow. All components are joined
together using slot and tab construction – a sturdy and more precise way to fit steel together. Attack angles
and A-frames have been redesigned to increase strength, especially at key pressure
zones. Three reinforced points-of-contact and a tubular bar along
the entire back of the moldboard increase
torsional strength.
The pivot bar is constructed using heavy walled tubular steel for added strength and rigidity.
Pro Series plows utilize a larger king bolt that is 41% stronger and can withstand a load 2.4 times greater. Features easy-to-reach grease fitting for longer service life.
All Pro Series moldboards feature increased height and aggressive attack angles for excellent plowing performance.
* Register new plow online at
www.meyerproducts.com
to activate years 3 through 5.
Drive Pro moldboard
Diamond Edge bottom-trip moldboard
Upgrade to one of these Pro Series plows:
Meyer® knows our owners take pride in the appearance of their snowplowing vehicles, but we also know
times are tough and purchasing a new plow might be a strain on your budget. Thanks to Meyer’s innovative new
plow designs, it is now easy and affordable to upgrade from a Classic Meyer Plow to an all-new Meyer Pro Series
moldboard for about HALf tHE PRiCE of a NeW complete plow system.
Introducing the Meyer® Face-Lift Program:
Your Wallet Won’t Suffer. Your Appearance and Productivity Will Improve.
Here’s how the Face-Lift Program works:➜ Keep your current mount, hydraulic unit, controller and lights
➜ Purchase a new Meyer Pro Series moldboard and PAF which provide better performance with improved snow rolling action and aggressive attack angles
➜ Select the accessories you may want to add to your new plow including wings, curb guards or deflectors
➜ Receive the benefit of Meyer’s exclusive 3/5-year ROC warranty, the best in the business
www.meyerproducts.com© 2010 Meyer Products LLC. Form #3-545 081010M
Meyer Products, LLC / 18513 Euclid Ave. / Cleveland, Ohio 44112 / 216-486-1313 / Fax 216-486-1321
Meyer Products LLC reserves the right under its continuing product improvement program to change construction or design details and specifications without incurring any obligation.
Meyer® Face-Lift Program. The Meyer Face-Lift Program is available for the models listed below:
Did You Know You Can Go...
From this...
EZ-Mount Plus Mounted Plows
Classic Plow System to be
Replaced
Upgrade Classic Series to Pro Series (includes plow, pivot and A-frame)
Description NEW Package #
ST 7.0 / ST 7.5 /STL 7.5* Drive Pro - DP 7.5 09390
STP 7.5* Drive Pro Poly - DPP 7.5 09391
C 7.5 Lot Pro - LP 7.5 09392
C 8.0 Lot Pro - LP 8.0 09393
C 8.5 Lot Pro - LP 8.5 09394
C 9.0 Lot Pro - LP 9.0 09395
CP 7.5 Lot Pro Poly - LPP 7.5 09396
CP 8.0 Lot Pro Poly - LPP 8.0 09397
CP 8.5 Lot Pro Poly - LPP 8.5 09398
CP 9.0 Lot Pro Poly - LPP 9.0 09399
D 7.5 Diamond Edge - DE 7.5 09370
D 8.0 Diamond Edge - DE 8.0 09371
D 8.5 Diamond Edge - DE 8.5 09372
D 9.0 Diamond Edge - DE 9.0 09373
For About Half The Cost?
To this...
EZ-Mount Classic Mounted Plows
Classic Plow System to be
Replaced
Upgrade Classic Series to Pro Series (includes plow, pivot and A-frame)
Description NEW Package #
TM 5.0 Drive Pro - DP 5.0 09374
TM 6.0 Drive Pro - DP 6.0 09375
TM 6.5 / TML 6.5 /TMP 6.5/TMP 7.0
Drive Pro - DP 6.8 (Steel Only) 09376
ST 7.0 / ST 7.5 /STL 7.5*
Drive Pro - DP 7.5 09380
STP 7.5* Drive Pro Poly - DPP 7.5 09381
C 7.5 Lot Pro - LP 7.5 09382
C 8.0 Lot Pro - LP 8.0 09383
C 8.5 Lot Pro - LP 8.5 09384
C 9.0 Lot Pro - LP 9.0 09385
CP 7.5 Lot Pro Poly - LPP 7.5 09386
CP 8.0 Lot Pro Poly - LPP 8.0 09387
CP 8.5 Lot Pro Poly - LPP 8.5 09388
CP 9.0 Lot Pro Poly - LPP 9.0 09389
NoTe: If new angling rams are required use Part #07620 two (2) required. If new couplers are required - contact Meyer Products
* Select Face-Lift kit by vehicle size. Drive Pro and Drive Pro Poly 7.5 moldboard should be used only for 1/2 ton and smaller vehicles. Do not use DP 7.5 plows on vehicles 3/4 ton and larger. Replaces original equipment utilizing a 23.5” A-frame only. For ST Series plow systems using a 17.5” A-frame, please contact Meyer Products.
Optional UpdatesEZ-Mount Plus or Classic Mounted Plows Optional Equipment
Hydraulic Unit to be replaced New Hydraulic Unit Number Description Angling Rams if Required
1-1/2 X 10”Angling Rams if Required
1-1/2 x 12” Hoses (full set)
E47, E47H, E57, E57H, E60, E61H 15995* Meyer E58H Unit Only 07968 (2 required) 05437SP (2 required) 22461 (2 required)
* Assumes end-user will use existing harness and controller Controllers
Existing Change toRequired Parts, Classic Mounting Systems Required Parts, PLUS Mounting Systems
Controller Harness Controller Harness
Toggle Switches
Slick Stick 22092C 15680 N/A N/A
Touch Pad 22154 15764 N/A N/A
Pistol Grip 22690X 15764 N/A N/A
Joystick 22790X 15764 N/A N/A
Slick Stick
Touch Pad 22154 15764 22154 22610
Pistol Grip 22690X 15764 22690X 22610
Joystick 22790X 15764 22790X 22610
Touch PadPistol Grip 22690X Use existing 22690X Use existing
Joystick 22790X Use Existing 22790X Use Existing
LightsExisting Change to Required Parts Comments
Generic After Market Nite Saber I or II 07234/07550 Need unique truck light adapter
Truck Lights Nite Saber I or II 07234/07550 Need unique truck light adapter
Nite Saber 1 Nite Saber II 07549 Use existing truck light adapter