Dịch vụ Cung cấp Thông tin Trọn gói Tháng 9/2018 1/25 TRƯỜNG ĐH CÔNG NGHIỆP TP. HỒ CHÍ MINH TRUNG TÂM THÔNG TIN – THƯ VIỆN TIÊU CHUẨN MỚI THÁNG 9/2018 Tiêu chuẩn nước ngoài ........................................................................................................................................... 2 Bao gói và phân phối hàng hóa ............................................................................................................................ 2 Cao su và chất dẻo ................................................................................................................................................ 2 Chế tạo – Dao cắt ................................................................................................................................................. 5 Chế tạo – Hàn, hàn đồng và hàn thiết .................................................................................................................. 5 Chế tạo – Hệ thống máy công cụ ......................................................................................................................... 5 Chế tạo – Hệ thống tự động hóa công nghiệp ..................................................................................................... 5 Chế tạo – Xử lý bề mặt và mạ .............................................................................................................................. 6 Cơ khí chính xác. Kim hoàn ................................................................................................................................ 6 Công nghệ ảnh ...................................................................................................................................................... 6 Công nghệ chăm sóc sức khỏe - Dược phẩm ...................................................................................................... 6 Công nghệ chăm sóc sức khỏe - Thiết bị y tế...................................................................................................... 6 Công nghệ chế biến gỗ ......................................................................................................................................... 7 Công nghệ dệt may và da ..................................................................................................................................... 7 Công nghệ hóa chất .............................................................................................................................................. 8 Công nghệ thông tin ............................................................................................................................................. 8 Công nghệ thực phẩm ........................................................................................................................................ 10 Dầu mỏ................................................................................................................................................................ 10 Dịch vụ. Tổ chức, quản lý và chất lượng công ty.............................................................................................. 11 Điện tử ................................................................................................................................................................ 12 Đo lường và phép đo .......................................................................................................................................... 12 Đóng tàu và kết cấu tàu thủy .............................................................................................................................. 12 Đường sắt ............................................................................................................................................................ 13 Hệ thống và kết cấu chất lỏng công dụng chung ............................................................................................... 13 Hệ thống và kết cấu chất lỏng - Phụ tùng đường ống và đường ống, Thiết bị chứa chất lỏng ........................ 13 Hệ thống và kết cấu cơ khí - Chi tiết lắp xiết .................................................................................................... 13 Hệ thống và kết cấu cơ khí - Ổ đỡ, Ren vít ....................................................................................................... 13 Kỹ thuật điện - Đèn và thiết bị liên quan ........................................................................................................... 13 Kỹ thuật điện - Máy biến áp............................................................................................................................... 14 Kỹ thuật điện - Phụ kiện điện............................................................................................................................. 14 Kỹ thuật điện - Thiết bị điện làm việc trong điều kiện đặc biệt - Vật liệu từ ................................................... 14 Kỹ thuật máy bay và tàu vũ trụ .......................................................................................................................... 14 Luyện kim........................................................................................................................................................... 15
25
Embed
TIÊU CHUẨN MỚI THÁNG 9/2018lib.iuh.edu.vn/wp-content/uploads/2018/12/Bantin_Tieu...Dịch vụ Cung cấp Thông tin Trọn gói Tháng 9/2018 3/25 97a(2013) Wood Products for
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
Dịch vụ Cung cấp Thông tin Trọn gói Tháng 9/2018 1/25
TRƯỜNG ĐH CÔNG NGHIỆP TP. HỒ CHÍ MINH
TRUNG TÂM THÔNG TIN – THƯ VIỆN
TIÊU CHUẨN MỚI THÁNG 9/2018
Tiêu chuẩn nước ngoài ........................................................................................................................................... 2
Bao gói và phân phối hàng hóa ............................................................................................................................ 2
Cao su và chất dẻo ................................................................................................................................................ 2
Chế tạo – Dao cắt ................................................................................................................................................. 5
Chế tạo – Hàn, hàn đồng và hàn thiết .................................................................................................................. 5
Chế tạo – Hệ thống máy công cụ ......................................................................................................................... 5
Chế tạo – Hệ thống tự động hóa công nghiệp ..................................................................................................... 5
Chế tạo – Xử lý bề mặt và mạ .............................................................................................................................. 6
Cơ khí chính xác. Kim hoàn ................................................................................................................................ 6
Công nghệ ảnh ...................................................................................................................................................... 6
Công nghệ chăm sóc sức khỏe - Thiết bị y tế ...................................................................................................... 6
Công nghệ chế biến gỗ ......................................................................................................................................... 7
Công nghệ dệt may và da ..................................................................................................................................... 7
Công nghệ hóa chất .............................................................................................................................................. 8
Công nghệ thông tin ............................................................................................................................................. 8
Công nghệ thực phẩm ........................................................................................................................................ 10
Dịch vụ. Tổ chức, quản lý và chất lượng công ty.............................................................................................. 11
Điện tử ................................................................................................................................................................ 12
Đo lường và phép đo .......................................................................................................................................... 12
Đóng tàu và kết cấu tàu thủy .............................................................................................................................. 12
Đường sắt ............................................................................................................................................................ 13
Hệ thống và kết cấu chất lỏng công dụng chung ............................................................................................... 13
Hệ thống và kết cấu chất lỏng - Phụ tùng đường ống và đường ống, Thiết bị chứa chất lỏng ........................ 13
Hệ thống và kết cấu cơ khí - Chi tiết lắp xiết .................................................................................................... 13
Hệ thống và kết cấu cơ khí - Ổ đỡ, Ren vít ....................................................................................................... 13
Kỹ thuật điện - Đèn và thiết bị liên quan ........................................................................................................... 13
Kỹ thuật điện - Máy biến áp ............................................................................................................................... 14
Kỹ thuật điện - Phụ kiện điện ............................................................................................................................. 14
Kỹ thuật điện - Thiết bị điện làm việc trong điều kiện đặc biệt - Vật liệu từ ................................................... 14
Kỹ thuật máy bay và tàu vũ trụ .......................................................................................................................... 14
Luyện kim ........................................................................................................................................................... 15
Dịch vụ Cung cấp Thông tin Trọn gói Tháng 9/2018 2/25
Môi trường - An toàn máy móc ......................................................................................................................... 16
Môi trường - Bảo vệ môi trường ........................................................................................................................ 16
Môi trường - Chất lượng đất .............................................................................................................................. 17
Môi trường - Chất lượng không khí ................................................................................................................... 17
Môi trường - Chất lượng nước ........................................................................................................................... 17
Môi trường - Ecgônômi ...................................................................................................................................... 18
Môi trường - Phòng cháy ................................................................................................................................... 18
Môi trường - Rung và xóc đối với con người .................................................................................................... 18
Môi trường - Thiết bị bảo vệ .............................................................................................................................. 18
Năng lượng và truyền nhiệt - Năng lượng hạt nhân .......................................................................................... 18
Năng lượng và truyền nhiệt - Năng lượng mặt trời ........................................................................................... 19
Phương tiện giao thông đường bộ ...................................................................................................................... 19
Sơn và chất màu ................................................................................................................................................. 20
Thiết bị gia dụng và thương mại giải trí. Thể thao ............................................................................................ 20
Toán học. Khoa học tự nhiên ............................................................................................................................. 22
Sinh học. Thực vật học ....................................................................................................................................... 22
Vấn đề chung. Thuật ngữ ................................................................................................................................... 22
Vật liệu xây dựng và xây dựng nhà ................................................................................................................... 23
Viễn thông. Kỹ thuật âm thanh và hình ảnh ...................................................................................................... 24
Xây dựng dân dụng ............................................................................................................................................ 25
TT Số hiệu tiêu chuẩn Tên tiêu chuẩn A4
Tiêu chuẩn nước ngoài
Bao gói và phân phối hàng hóa Trở về đầu trang
1
ISO 28862:2018 Packaging -- Child-resistant packaging --
Requirements and testing procedures for
non-reclosable packages for non-
pharmaceutical products
13
Cao su và chất dẻo Trở về đầu trang
2
ASTM C272/C272M-18 Replaces:
ASTM C272/C272M-16
Standard Test Method for Water Absorption
of Core Materials for Sandwich
Constructions
4
3 ASTM D1101-97a(2018)
Replaces: ASTM D1101-
Standard Test Methods for Integrity of
Adhesive Joints in Structural Laminated
3
Dịch vụ Cung cấp Thông tin Trọn gói Tháng 9/2018 3/25
97a(2013) Wood Products for Exterior Use
4 ASTM D1488-00(2018) Replaces:
ASTM D 1488-00(2013)
Standard Test Method for Amylaceous
Matter in Adhesives
2
5
ASTM D1490 -01(2018)
Replaces: ASTM D1490-01
(2013)
Standard Test Method for Nonvolatile
Content of Urea-Formaldehyde Resin
Solutions
2
6
ASTM D1579 -01(2018)
Replaces: ASTM D1579-01(2013)
Standard Test Method for Filler Content of
Phenol, Resorcinol, and Melamine
Adhesives
2
7 ASTM D1583-01(2018) Replaces:
ASTM D1583-01(2013)
Standard Test Method for Hydrogen Ion
Concentration of Dry Adhesive Films
2
8 ASTM D3045-18 Replaces:
ASTM D3045-92(2010)
Standard Practice for Heat Aging of Plastics
Without Load
6
9
ASTM D3222-18a Replaces:
ASTM D3222-18
Standard Specification for Unmodified
Poly(Vinylidene Fluoride) (PVDF) Molding
Extrusion and Coating Materials
5
10
ASTM D3434 -00(2018)
Replaces: ASTM D3434-00(2013)
Standard Test Method for Multiple-Cycle
Accelerated Aging Test (Automatic Boil
Test) for Exterior Wet Use Wood Adhesives
5
11
ASTM D3493 -18 Replaces:
ASTM D3493-16
Standard Test Method for Carbon Black—
Oil Absorption Number of Compressed
Sample (COAN)
4
12 ASTM D4689-12(2018) Replaces:
ASTM D4689-12
Standard Specification for Adhesive, Casein-
Type
5
13 ASTM D4690-12(2018) Replaces:
ASTM D4690-12
Standard Specification for Urea-
Formaldehyde Resin Adhesives
5
14
ASTM D4890-18 Replaces:
ASTM D4890-13
Standard Test Methods for Polyurethane
Raw Materials: Determination of Gardner
and APHA Color of Polyols
5
15
ASTM D5575-18 Replaces:
ASTM D5575-07(2013)
Standard Classification System for
Copolymers of Vinylidene Fluoride (VDF)
with Other Fluorinated Monomers
12
16 ASTM D570-98(2018) Replaces:
ASTM D570-98(2010)e1
Standard Test Method for Water Absorption
of Plastics
4
17 ASTM D5947-18 Replaces:
ASTM D5947-11
Standard Test Methods for Physical
Dimensions of Solid Plastics Specimens
10
18 ASTM D6456-10(2018) Replaces:
ASTM D6456-10
Standard Specification for Finished Parts
Made from Polyimide Resin
3
19
ASTM D6979-18 Replaces:
ASTM D6979-13
Standard Test Method for Polyurethane Raw
Materials: Determination of Basicity in
Polyols, Expressed as Percent Nitrogen
3
20 ASTM D7444-18 Replaces:
ASTM D7444-11
Standard Practice for Heat and Humidity
Aging of Oxidatively Degradable Plastics
6
21 ASTM D7487-18 Replaces:
ASTM D7487-13e1
Standard Practice for Polyurethane Raw
Materials: Polyurethane Foam Cup Test
5
22
ASTM D865-11(2018) Replaces:
ASTM D865-11
Standard Test Method for Rubber—
Deterioration by Heating in Air (Test Tube
Enclosure)
5
23 ASTM D882 -18 Replaces: ASTM
D882-12
Standard Test Method for Tensile Properties
of Thin Plastic Sheeting
12
Dịch vụ Cung cấp Thông tin Trọn gói Tháng 9/2018 4/25
24
ASTM E2203-14(2018) Replaces:
ASTM E2203-14
Standard Specification for Dense
Thermoplastic Elastomers Used for
Compression Seals, Gaskets, Setting Blocks,
Spacers and Accessories
7
25
BS EN 15860:2018 Replaces: BS
EN 15860:2010
Plastics. Thermoplastic semi-finished
products for machining. Requirements and
test methods
46
26
BS EN ISO 20557-2:2018
Replaces: BS EN ISO 15103-
2:2007
Plastics. Poly(phenylene ether) (PPE)
moulding and extrusion materials.
Preparation of test specimen and
determination of properties
12
27 BS ISO 15314:2018 Replaces: BS
ISO 15314:2004
Plastics. Methods for marine exposure 20
28
BS ISO 17281:2018 Replaces: BS
ISO 17281:2002
Plastics. Determination of fracture toughness
(GIC and KIC) at moderately high loading
rates (1 m/s)
38
29
BS ISO 19927:2018 Fibre-reinforced plastic composites.
Determination of interlaminar strength and
modulus by double beam shear test
30
30
BS ISO 6238:2018 Adhesives. Wood-to-wood adhesive bonds.
Determination of shear strength by
compressive loading
16
31
ISO 13586:2018 Replaces: ISO
13586:2000; ISO
13586:2000/Amd 1:2003
Plastics -- Determination of fracture
toughness (GIC and KIC) -- Linear elastic
fracture mechanics (LEFM) approach
22
32 ISO 15314:2018 Replaces: ISO
15314:2004
Plastics -- Methods for marine exposure 12
33
ISO 17281:2018 Replaces: ISO
17281:2002
Plastics -- Determination of fracture
toughness (GIC and KIC) at moderately high
loading rates (1 m/s)
29
34
ISO 17281:2018 Replaces: ISO
17281:2002
Plastics -- Determination of fracture
toughness (GIC and KIC) at moderately high
loading rates (1 m/s)
29
35
ISO 19927:2018 Fibre-reinforced plastic composites —
Determination of interlaminar strength and
modulus by double beam shear test
21
36 ISO 247-1:2018 Replaces: ISO
247-1:2006
Rubber -- Determination of ash -- Part 1:
Combustion method
7
37 ISO 247-2:2018 Rubber -- Determination of ash -- Part 2:
Thermogravimetric analysis (TGA)
7
38
ISO 6101-5:2018 Replaces: ISO
6101-5:2006
Rubber -- Determination of metal content by
atomic absorption spectrometry -- Part 5:
Determination of iron content
11
39
ISO 6238:2018 Replaces: ISO
6238:2001
Adhesives — Wood-to-wood adhesive
bonds — Determination of shear strength by
compressive loading
10
40
ISO 6502-2:2018 Replaces: ISO
ISO 3417:2008
Rubber -- Measurement of vulcanization
characteristics using curemeters -- Part 2:
Oscillating disc curemeter
13
41 ISO 8307:2018 Replaces: ISO Flexible cellular polymeric materials -- 7
Dịch vụ Cung cấp Thông tin Trọn gói Tháng 9/2018 5/25
8307:2007 Determination of resilience by ball rebound
42
ISO/TS 22687:2018 Rubber -- Framework for assessing the
environmental fate of tyre and road wear
particles (TRWP)
13
43
JIS K 6400-9:2018 Flexible cellular polymeric materials -- Part
9: Determination of antibacterial
effectiveness
14
Chế tạo – Dao cắt Trở về đầu trang
44 JIS B 4304:2018 Centre drills for centre holes 18
Chế tạo – Hàn, hàn đồng và hàn thiết Trở về đầu trang
45
ISO 2401:2018 Replaces: ISO
2401:1972
Welding consumables -- Covered electrodes
-- Determination of the efficiency, metal
recovery and deposition coefficient
5
46
ISO 24373:2018 Replaces: ISO
24373:2008
Welding consumables — Solid wires and
rods for fusion welding of copper and copper
alloys — Classification
8
47
ISO 3690:2018 Replaces: ISO
3690:2012
Welding and allied processes --
Determination of hydrogen content in arc
weld metal
23
48
ISO 8249:2018 Replaces: ISO
8249:2000
Welding -- Determination of Ferrite Number
(FN) in austenitic and duplex ferritic-
austenitic Cr-Ni stainless steel weld metals
27
Chế tạo – Hệ thống máy công cụ Trở về đầu trang
49 JIS B 1192-2:2018 Ball screws -- Part 2: Nominal diameters and
nominal leads
16
50 JIS B 1192-3:2018 Ball screws -- Part 3: Acceptance conditions
and test method
26
51 JIS B 1192-4:2018 Ball screws -- Part 4: Static axial rigidity 16
52 JIS B 1192-5:2018 Ball screws -- Part 5: Static and dynamic
axial load ratings and operational life
18
Chế tạo – Hệ thống tự động hóa công nghiệp Trở về đầu trang
53
BS ISO 20140-2:2018 Automation systems and integration.
Evaluating energy efficiency and other
factors of manufacturing systems that
influence the environment. Environmental
performance evaluation process
20
54
ISO 15926-13:2018 Industrial automation systems and
integration. Integration of life-cycle data for
process plants including oil and gas
production facilities. Integrated asset
planning life-cycle
104
55
ISO 20140-2:2018 Automation systems and integration --
Evaluating energy efficiency and other
factors of manufacturing systems that
influence the environment -- Part 2:
Environmental performance evaluation
process
12
56 JIS B 6336-1:2018 Test conditions for machining centres -- Part
1: Geometric tests for machines with
96
Dịch vụ Cung cấp Thông tin Trọn gói Tháng 9/2018 6/25
horizontal spindle (horizontal Z-axis)
57 JIS B 6336-6:2018 Machining centres -- Test conditions -- Part
6: Accuracy of speeds and interpolations
42
58 JIS B 6336-7:2018 Test conditions for machining centres -- Part
7: Accuracy of finished test pieces
26
Chế tạo – Xử lý bề mặt và mạ Trở về đầu trang
59 ASTM B689 -97(2018)e1
Replaces: ASTM B689-97(2018)
Standard Specification for Electroplated
Engineering Nickel Coatings
7
60 ASTM F1137/F1137M-18
Replaces: ASTM F1137-11e1
Standard Specification for Phosphate/Oil
Corrosion Protective Coatings for Fasteners
3
61
BS EN 13507:2018 Replaces: BS
EN 13507:2010
Thermal spraying. Pre-treatment of surfaces
of metallic parts and components for thermal
spraying
12
62
ISO 21164:2018 Metallic and other inorganic coatings -- DC
magnetron sputtered silver coatings for
engineering purposes -- Measurement of
coating adhesion
4
63
ISO 8251:2018 Replaces: ISO
8251:2011
Anodizing of aluminium and its alloys --
Measurement of abrasion resistance of
anodic oxidation coatings
29
Cơ khí chính xác. Kim hoàn Trở về đầu trang
64 JIS B 7001:2018 Watches and clocks -- Test methods 34
65 JIS B 7027:2018 Shock-resistant wrist watches -- Impact
performance and test methods
24
Công nghệ ảnh Trở về đầu trang
66
ISO 11699-2:2018 Replaces: ISO
11699-2:1998
Non-destructive testing -- Industrial
radiographic films -- Part 2: Control of film
processing by means of reference values
10
Công nghệ chăm sóc sức khỏe - Dược phẩm Trở về đầu trang
67 ISO/TR 23021:2018 Traditional Chinese medicine -- Controlled
vocabulary on Japanese Kampo crude drugs
57
Công nghệ chăm sóc sức khỏe - Thiết bị y tế Trở về đầu trang
68 BS ISO 20493:2018 Traditional Chinese medicine. Infrared
moxibustion-like instrument
16
69
BS ISO 7206-10:2018 Replaces:
BS ISO 7206-10:2003
Implants for surgery. Partial and total hip-
joint prostheses. Determination of resistance
to static load of modular femoral heads
20
70
BS ISO 80601-2-79:2018 Medical electrical equipment. Particular
requirements for basic safety and essential
performance of ventilatory support
equipment for ventilatory impairment
86
71
BS ISO 80601-2-80:2018 Medical electrical equipment. Particular
requirements for basic safety and essential
performance of ventilatory support
equipment for ventilatory insufficiency
98
72
ISO 14242-1:2014/Amd 1:2018 Implants for surgery -- Wear of total hip-
joint prostheses -- Part 1: Loading and
displacement parameters for wear-testing
machines and corresponding environmental
3
Dịch vụ Cung cấp Thông tin Trọn gói Tháng 9/2018 7/25
conditions for test AMENDMENT 1
73 ISO 20493:2018 Traditional Chinese medicine -- Infrared
moxibustion-like instrument
8
74
ISO 20698:2018 Catheter systems for neuraxial application --
Sterile and single-use catheters and
accessories
20
75
ISO 7206-10:2018 Replaces: ISO
7206-10:2003
Implants for surgery -- Partial and total hip-
joint prostheses -- Part 10: Determination of
resistance to static load of modular femoral
heads
11
76 ISO 8362-1:2018 Replaces: ISO
8362-1:2009
Injection containers and accessories -- Part
1: Injection vials made of glass tubing
7
Công nghệ chế biến gỗ Trở về đầu trang
77
ASTM D2559 -12a(2018)
Replaces: ASTM D2559-12ae1
Standard Specification for Adhesives for
Bonded Structural Wood Products for Use
Under Exterior Exposure Conditions
14
Công nghệ dệt may và da Trở về đầu trang
78 ASTM D8137-18 Practice for Accelerated Aging of Leather 7
79 ASTM D4391-18a Replaces:
ASTM D4391-18
Standard Terminology Relating to The
Burning Behavior of Textiles
3
80 ASTM D8198-18 Standard Specification for Hydraulically
Applied 100 % Wood Fiber Mulches
3
81 ASTM D578/D578M-18 Replaces:
ASTMD578/D578M-05(2011)e1
Standard Specification for Glass Fiber
Strands
20
82
ASTM D1282-18 Replaces:
ASTM D 1282-05(2009)
Standard Test Method for Resistance to
Airflow as an Indication of Average Fiber
Diameter of Wool Top, Card Sliver, and
Scoured Wool
9
83 ASTM D1334-18 Replaces:
ASTM D 1334-05(2009)
Standard Test Method for Wool Content of
Raw Wool—Commercial Scale
3
84
ASTM D2118-18 Replaces:
ASTM D2118-05(2009)
Standard Practice for Assigning a Standard
Commercial Moisture Content for Wool and
its Products
2
85 ASTM D2252 -18 Replaces:
ASTM D2252-05(2009)
Standard Specification for Fineness of Types
of Alpaca
3
86 ASTM D2816-18 Replaces:
ASTM D2816-05(2009)
Standard Test Method for Cashmere Coarse-
Hair Content in Cashmere
3
87 ASTM D2817-18 Replaces:
ASTM D2817-05(2009)
Standard Specification for Maximum
Cashmere Coarse-Hair Content in Cashmere
2
88 ASTM D4845-10(2018) Replaces:
ASTM D4845-10e2
Standard Terminology Relating to Wool 6
89 ASTM D7879-13(2018) Replaces:
ASTM D7879-13
Standard Test Method for Determining Flax
Fiber Widths Using Image Analysis
3
90 BS ISO 11567:2018 Replaces: BS
ISO 11567:1995
Carbon fibre. Determination of filament
diameter and cross-sectional area
18
91 ISO 11640:2018 Replaces: ISO
11640:2012
Leather -- Tests for colour fastness -- Colour
fastness to cycles of to-and-fro rubbing
6
92 ISO 9902-6:2018 Replaces: ISO
9902-6:2001; ISO 9902-
Textile machinery -- Noise test code -- Part
6: Fabric manufacturing machinery
16
Dịch vụ Cung cấp Thông tin Trọn gói Tháng 9/2018 8/25
6:2001/Amd 1:2009; ISO 9902-
6:2001/Amd 2:2014
93 ISO 1419:2018 Replaces: ISO
1419:1995
Rubber - or plasties-coated fabrics —
Accelerated - ageing tests
6
94 ISO 11567:2018 Replaces: ISO
11567:1995
Carbon fibre -- Determination of filament
diameter and cross-sectional area
11
Công nghệ hóa chất Trở về đầu trang
95 ASTM D5273-18 Replaces:
ASTM D5273-92(2012)
Standard Guide for Analysis of Propylene
Concentrates
4
96
ASTM D7794-18 Replaces:
ASTM D7794-14
Standard Practice for Blending Mid-Level
Ethanol Fuel Blends for Flexible-Fuel
Vehicles with Automotive Spark-Ignition
Engines
6
97 ASTM D2414-18 Replaces:
ASTM D2414-17
Standard Test Method for Carbon Black—
Oil Absorption Number (OAN)
9
98
ASTM D7169-18 Replaces:
ASTM D7169-16
Standard Test Method for Boiling Point
Distribution of Samples with Residues Such
as Crude Oils and Atmospheric and Vacuum
Residues by High Temperature Gas
Chromatography
20
99
JIS K 0156:2018 Surface chemical analysis -- Secondary-ion
mass spectrometry -- Method for depth
calibration for silicon using multiple delta-
layer reference materials
22
Công nghệ thông tin Trở về đầu trang
100
ASTM E2443-05(2018)e1
Replaces: ASTM E2443-
05(2010)e1
Standard Guide for Verifying Computer-
Generated Test Results Through The Use Of
Standard Data Sets
5
101
ASTM E3149-18 Standard Guide for Facial Image
Comparison Feature List for Morphological
Analysis
19
102
BS ISO/IEC 7811-1:2018
Replaces: BS ISO/IEC 7811-
1:2014
Identification cards. Recording technique.
Embossing
28
103
BS ISO/IEC 7811-2:2018
Replaces: BS ISO/IEC 7811-
2:2014
Identification cards. Recording technique.
Magnetic stripe: Low coercivity
28
104
BS ISO/IEC 7811-6:2018
Replaces: BS ISO/IEC 7811-
6:2014
Identification cards. Recording technique.
Magnetic stripe: High coercivity
30
105
BS ISO/IEC 7811-7:2018
Replaces: BS ISO/IEC 7811-
7:2014
Identification cards. Recording technique.
Magnetic stripe: High coercivity, high
density
30
106
BS ISO/IEC 18000-4:2018
Replaces: BS ISO/IEC 18000-
4:2015
Information technology. Radio frequency
identification for item management.
Parameters for air interface communications
at 2,45 GHz
212
107
BS ISO/IEC 30140-3:2018 Information technology. Underwater
acoustic sensor network (UWASN). Entities
and interface
24
Dịch vụ Cung cấp Thông tin Trọn gói Tháng 9/2018 9/25
108
ISO/IEC 18000-4:2018 Replaces;
ISO/1EC 18000-4:2015
Information technology -- Radio frequency
identification for item management -- Part 4:
Parameters for air interface communications
at 2,45 GHz
200
109
ISO/IEC 21000-
22:2016/AMD1:2018
Amendment 1 - Information technology -
Multimedia framework (MPEG-21) - Part
22: User Description - Reference software
for MPEG-21 user description
20
110
ISO/IEC 23008-6:2018 Information technology - High efficiency
coding and media delivery in heterogeneous
environments - Part 6: 3D audio reference
software
5
111
ISO/IEC 23008-8:2018 Replaces:
ISO/IEC 23008-8:2015
Information technology -- High efficiency
coding and media delivery in heterogeneous
environments -- Part 8: Conformance
specification for HEVC
126
112
ISO/IEC TR 23008-14:2018 Information technology -- High efficiency
coding and media delivery in heterogeneous
environments -- Part 14: Conversion and
coding practices for HDR/WCG Y'CbCr
4:2:0 video with PQ transfer characteristics
36
113
ISO/IEC TR 23008-15:2018 Information technology -- High efficiency
coding and media delivery in heterogeneous
environments -- Part 15: Signalling,
backward compatibility and display
adaptation for HDR/WCG video
44
114
ISO/IEC 21964-1:2018 Information technology — Destruction of
data carriers — Part 1: Principles and
definitions
6
115 ISO/IEC 21964-1:2018 Information technology - Destruction of data
carriers - Part 1: Principles and definitions
6
116
ISO/IEC 21964-2:2018 Information technology — Destruction of
data carriers - Part 2: Requirements for
equipment for destruction of data carriers
9
117
ISO/IEC 21964-3:2018 Information technology -- Destruction of
data carriers -- Part 3: Process of destruction
of data carriers
8
118
ISO/IEC 30140-3:2018 Information technology -- Underwater
acoustic sensor network (UWASN) -- Part 3:
Entities and interface
21
119
ISO/IEC 30140-4:2018 Information technology -- Underwater
acoustic sensor network (UWASN) -- Part 4:
Interoperability
16
120
ISO 16461:2018 Intelligent transport systems -- Criteria for
privacy and integrity protection in probe
vehicle information systems
16
121
ISO/IEC 10373-3:2018 Identification cards - Test methods - Part 3:
Integrated circuit cards with contacts and
related interface devices
50
122 ISO/IEC 18013-1:2018 Replaces: Information technology -- Personal 81
Dịch vụ Cung cấp Thông tin Trọn gói Tháng 9/2018 10/25