Page 1
Dịch vụ Cung cấp Thông tin Trọn gói Tháng 12/2017 1/50
TRƯỜNG ĐH CÔNG NGHIỆP TP. HỒ CHÍ MINH
TRUNG TÂM THÔNG TIN – THƯ VIỆN
TIÊU CHUẨN MỚI THÁNG 12/2017
TIÊU CHUẨN - QUY CHUẨN - VĂN BẢN KỸ THUẬT ĐO LƯỜNG VIỆT
NAM ................................................................................................................................. 3
Công nghệ thực phẩm (Sản phẩm dinh dưỡng công thức) ....................................... 3
Kỹ thuật điện ............................................................................................................ 3
Công nghệ thông tin ................................................................................................. 3
Gốm sứ ..................................................................................................................... 3
Vật liệu xây dựng..................................................................................................... 4
Đóng tàu và kết cấu tàu thủy ................................................................................... 5
Viễn thông ............................................................................................................... 5
Quân sự .................................................................................................................... 6
Công nghệ dệt may .................................................................................................. 6
Ecgônômi (Công thái học) ....................................................................................... 6
Quản lý môi trường .................................................................................................. 6
Phương tiện đo - Quy trình kiểm định .................................................................... 7
TIÊU CHUẨN NƯỚC NGOÀI .................................................................................... 8
Vi sinh vật thực phẩm, nước .................................................................................... 8
Phương pháp thử và phân tích đối với thực phẩm; Ngũ cốc .................................... 8
Sữa và các sản phẩm sữa .......................................................................................... 8
Đường. Sản phẩm đường ......................................................................................... 8
Nhà máy và thiết bị trong công nghiệp thực phẩm ................................................... 9
Nông nghiệp (Máy móc, dụng cụ và thiết bị nông nghiệp; Phân bón) ..................... 9
Phân bón .................................................................................................................. 9
Thức ăn gia súc ........................................................................................................ 9
Công nghệ hóa chất .................................................................................................. 9
Dầu mỏ và các công nghệ liên quan ....................................................................... 10
Công nghệ nano ..................................................................................................... 11
Cao su và Chất dẻo ................................................................................................ 11
Phụ tùng đường ống và đường ống (Ống nhựa; Ống bằng gang thép; Quy định
chung; Mặt bích, mối ghép; Vòi hút)……………………………………………..11
Hệ thống và kết cấu chất lỏng (Ống dẫn và khớp nối; Van) .................................. 13
Hệ thống và kết cấu chất lỏng (Thiết bị chứa chất lỏng; Hệ thống truyền dẫn chất
lỏng; Công nghệ chân không)…………………………………………………….13
Năng lượng và truyền nhiệt (Năng lượng hạt nhân; Tuabin khí; Tuabin gió) ........ 14
Page 2
Dịch vụ Cung cấp Thông tin Trọn gói Tháng 12/2017 2/50
Khai thác mỏ và khoáng sản (Khoáng sản kim loại và phi kim loại) ..................... 15
Phương tiên giao thông đường bộ - Vận tải ........................................................... 16
Đường sắt ............................................................................................................... 16
Đóng tàu và Kết cấu tàu thủy ................................................................................. 17
Kỹ thuật máy bay và tàu vũ trụ .............................................................................. 17
Chế tạo (Hệ thống tự động hóa công nghiệp) ........................................................ 20
Chế tạo (Hàn đồng và hàn thiếc) ............................................................................ 20
Chế tạo (Dụng cụ cầm tay) .................................................................................... 21
Chế tạo (Xử lý bề mặt) ........................................................................................... 21
Hệ thống và kết cấu cơ khí (Ổ đỡ; Chi tiết lắp xiết; Bánh răng) ............................ 24
Thiết bị xếp dỡ vật liệu(Xe tải công nghiệp; Máy làm đất; Phụ kiện băng tải; Cần
trục) ........................................................................................................................ 24
Luyện kim (Luyện kim bột, kim loại màu) ............................................................ 24
Luyện kim (Kim loại đen; Sản phẩm sắt và thép) .................................................. 25
Luyện kim (Thử nghiệm kim loại) ......................................................................... 25
Điện tử ................................................................................................................... 26
Kỹ thuật điện .......................................................................................................... 26
Thiết bị điện gia dụng............................................................................................. 27
Thiết bị Quang học ................................................................................................. 28
Công nghệ thông tin và ứng dụng .......................................................................... 28
Viễn thông. Kỹ thuật âm thanh và hình ảnh ........................................................... 34
Vật liệu xây dựng và Xây dựng nhà ....................................................................... 35
Xây dựng nhà (Âm học trong xây dựng) ............................................................... 36
Xây dựng dân dụng ( Kỹ thuật làm đường; Hệ thống nước cống bên ngoài) ......... 37
Công nghệ chế biến gỗ ........................................................................................... 37
Sơn và chất màu (Sơn và vecni; Thành phần sơn) ................................................. 37
Công nghệ da ......................................................................................................... 38
Công nghệ dệt may ................................................................................................ 38
May mặc................................................................................................................. 39
Thủy tinh và gốm (Gốm cao cấp- Thủy tinh – Vật liệu chịu lửa) ......................... 39
Công nghệ chăm sóc sức khỏe (Thiết bị y tế) ........................................................ 40
Công nghệ chăm sóc sức khỏe (Thiết bị nha khoa)................................................ 41
Công nghệ chăm sóc sức khỏe (Tiệt khuẩn và khử trùng; Y học thí nghiệm) ........ 41
Thiết bị gia dụng – Giải trí ..................................................................................... 42
An toàn (Phòng cháy; Phòng nổ; Thiết bị bảo vệ) ................................................. 44
Ecgônômi (Công thái học) ..................................................................................... 44
Môi trường (Ô nhiễm, kiểm soát ô nhiễm và bảo tồn) .......................................... 44
Môi trường (Chất lượng không khí; Phát thải của phương tiện giao thông do vận
chuyển) .................................................................................................................. 45
Môi trường (Chất thải) ........................................................................................... 45
Page 3
Dịch vụ Cung cấp Thông tin Trọn gói Tháng 12/2017 3/50
Môi trường (Chất lượng đất) .................................................................................. 46
Môi trường (Chất lượng nước) ............................................................................... 46
Đo lường và phép đo (Phép đo bức xạ, đại lượng điện và từ) ................................ 47
Đo lường và phép đo (Đo khối lượng, thể tích, tỷ trọng, độ nhớt; Đo lưu lượng
chất ......................................................................................................................... 47
Thử nghiệm (Thử nghiệm điện và điện từ; Thử nghiệm không phá hủy) .............. 48
Thử nghiệm (Thử nghiệm môi trường) .................................................................. 48
Dịch vụ. Tổ chức, quản lý và chất lượng công ty................................................... 48
Bao gói và phân phối hàng hóa (Phụ kiện và vật liệu bao gói) .............................. 49
Khoa học thông tin ................................................................................................. 49
Lĩnh vực khác (Dụng cụ vẽ) .................................................................................. 49
TT Số hiệu tiêu chuẩn Tên tiêu chuẩn A4
TIÊU CHUẨN - QUY CHUẨN - VĂN BẢN KỸ THUẬT ĐO LƯỜNG VIỆT NAM
Công nghệ thực phẩm (Sản phẩm dinh dưỡng công thức) Trở về đầu trang
1 QCVN 11-1:2012/BYT Quy chuẩn kỹ thuật quốc gia đối với sản phẩm dinh
dưỡng công thức cho trẻ đến 12 tháng tuổi
19
2 QCVN 11-2:2012/BYT Quy chuẩn kỹ thuật quốc gia đối với sản phẩm dinh
dưỡng công thức với mục đích y tế đắc biệt cho trẻ
đến 12 tháng tuổi
19
3 QCVN 11-3:2012/BYT Quy chuẩn kỹ thuật quốc gia đối với sản phẩm dinh
dưỡng công thức với mục đích ăn bổ sung cho trẻ từ
6 đến 36 tháng tuổi
16
Kỹ thuật điện Trở về đầu trang
4 TCVN 8782:2017 Thay
thế:TCVN 8782:2011
Bóng đèn LED có balát lắp liền dùng cho chiếu
sáng thông dụng làm việc ở điện áp lớn hơn 50 V.
Quy định về an toàn
23
5 TCVN 11846:2017 Bóng đèn LED hai đầu đuợc thiết kế để thay thế
bóng đèn huỳnh quang ống thẳng. Quy định về an
toàn
31
6 TCVN 11858:2017 Máy lọc không khí. Yêu cầu về tính năng và
phương pháp thử
17
Công nghệ thông tin Trở về đầu trang
7 TCVN 11847:2017 Máy tính để bàn và máy tính xách tay. Đo điện
năng tiêu thụ
51
8 TCVN 11848:2017 Máy tính xách tay. Hiệu suất năng lượng 11
Gốm sứ Trở về đầu trang
9 TCVN 6415-1:2016 Thay
thế:TCVN 6415-1:2005
Gạch gốm ốp, lát. Phương pháp thử. Phần 1: Lấy
mẫu và nghiệm thu sản phẩm
9
Page 4
Dịch vụ Cung cấp Thông tin Trọn gói Tháng 12/2017 4/50
10 TCVN 6415-2:2016 Thay
thế:TCVN 6415-2:2005
Gạch gốm ốp, lát. Phương pháp thử. Phần 2: Xác
định kích thước và chất lượng bề mặt
15
11 TCVN 6415-3:2016 Thay
thế:TCVN 6415-3:2005
Gạch gốm ốp, lát. Phương pháp thử. Phần 3: Xác
định độ hút nước, độ xốp biểu kiến, khối lượng
riêng tương đối và khối lượng thể tích
9
12 TCVN 6415-4:2016 Thay
thế:TCVN 6415-4:2005
Gạch gốm ốp lát. Phương pháp thử. Phần 4: Xác
định độ bền uốn và lực uốn gãy
9
13 TCVN 6415-5:2016 Thay
thế:TCVN 6415-5:2005
Gạch gốm ốp lát. Phương pháp thử. Phần 5: Xác
định độ bền va đập bằng cách đo hệ số phản hồi
11
14 TCVN 6415-6:2016 Thay
thế:TCVN 6415-6:2005
Gạch gốm ốp, lát. Phương pháp thử. Phần 6: Xác
định độ bền mài mòn sâu đối với gạch không phủ
men
9
15 TCVN 6415-7:2016 Thay
thế:TCVN 6415-7:2005
Gạch gốm ốp, lát. Phương pháp thử. Phần 7: Xác
định độ bền mài mòn bề mặt đối với gạch phủ men
12
16 TCVN 6415-8:2016 Thay
thế:TCVN 6415-8:2005
Gạch gốm ốp, lát. Phương pháp thử. Phần 8: Xác
định hệ số giãn nở
6
17 TCVN 6415-9:2016 Thay
thế:TCVN 6415-9:2005
Gạch gốm ốp, lát. Phương pháp thử. Phần 9: Xác
định hệ độ bền sốc nhiệt
7
18 TCVN 6415-10:2016 Thay
thế:TCVN 6415-10:2005
Gạch gốm ốp, lát. Phương pháp thử. Phần 10: Xác
định hệ số giãn nở ẩm
8
19 TCVN 6415-11:2016 Thay
thế:TCVN 6415-11:2005
Gạch gốm ốp, lát. Phương pháp thử. Phần 11: Xác
định độ bền rạn men đối với gạch men
7
20 TCVN 6415-12:2016 Thay
thế:TCVN 6415-12:2005
Gạch gốm ốp, lát. Phương pháp thử. Phần 12: Xác
định độ bền băng giá
7
21 TCVN 6415-13:2016 Thay
thế:TCVN 6415-13:2005
Gạch gốm ốp, lát. Phương pháp thử. Phần 13: Xác
định độ bền hoá học
11
22 TCVN 6415-14:2016 Thay
thế:TCVN 6415-14:2005
Gạch gốm ốp, lát. Phương pháp thử. Phần 14: Xác
định độ bền chống bám bẩn
12
23 TCVN 6415-15:2016 Thay
thế:TCVN 6415-15:2005
Gạch gốm ốp, lát. Phương pháp thử. Phần 15: Xác
định độ thôi chì và cadimi của gạch phủ men
8
24 TCVN 6415-16:2016 Thay
thế:TCVN 6415-16:2005
Gạch gốm ốp, lát. Phương pháp thử. Phần 16: Xác
định sự khác biệt nhỏ về màu
8
25 TCVN 6415-17:2016 Thay
thế:TCVN 6415-17:2005
Gạch gốm ốp, lát. Phương pháp thử. Phần 17: Xác
định hệ số ma sát
18
26 TCVN 6415-18:2016 Thay
thế:TCVN 6415-18:2005
Gạch gốm ốp, lát. Phương pháp thử. Phần 18: Xác
định độ cứng bề mặt theo thang mohs
6
Vật liệu xây dựng Trở về đầu trang
Page 5
Dịch vụ Cung cấp Thông tin Trọn gói Tháng 12/2017 5/50
27 TCVN 11808:2017 Nhựa đường. Xác định các đặc tính lưu biến bằng
lưu biến kế cắt động
44
28 TCVN 11833:2017 Thạch cao phospho dùng để sản xuất xi măng 26
29 TCVN 11893:2017 Vật liệu bentonite. Phương pháp thử 19
Đóng tàu và kết cấu tàu thủy Trở về đầu trang
30 QCVN 03:2009/BGTVT Quy chuẩn kỹ thuật quốc gia về giám sát kỹ thuật
và đóng tàu biển cỡ nhỏ
84
31 QCVN 03:2016/BGTVT Quy chuẩn kỹ thuật quốc gia về kiểm tra và đóng
tàu biển cỡ nhỏ
160
32 QCVN 21:2015/BGTVT
Thay thế: QCVN
21:2010/BGTVT
Quy chuẩn kỹ thuật Quốc gia về quy phạm phân
cấp và đóng tàu biển vỏ thép
242
33 QCVN 23:2016/BGTVT Quy chuẩn Quốc gia về thiết bị nâng trên tàu biển 67
34 QCVN 26:2016/BGTVT
Thay thế:QCVN
26:2014/BGTVT
Quy chuẩn kỹ thuật quốc gia về các hệ thống ngăn
ngừa ô nhiễm biển của tàu
174
35 QCVN 42:2015/BGTVT
Thay thế:QCVN
42:2012/BGTVT
Quy chuẩn kỹ thuật quốc gia về trang bị an toàn tàu
biển
363
36 QCVN 54:2015/BGTVT
Thay thế:QCVN
54:2013/BGTVT
Quy chuẩn kỹ thuật quốc gia về phân cấp và đóng
tàu thủy cao tốc
297
37 QCVN 57:2015/BGTVT Quy chuẩn kỹ thuật quốc gia về phân cấp và đóng
sản nâng tàu
48
38 QCVN 64:2015/BGTVT
Thay thế:QCVN
64:2013/BGTVT
Quy chuẩn kỹ thuật quốc gia về kiểm tra sản phẩm
công nghiệp dùng cho tàu biển
68
39 QCVN 65:2015/BGTVT
Thay thế:QCVN
65:2013/BGTVT
Quy chuẩn kỹ thuật quốc gia về đánh giá năng lực
cơ sở chế tạo và cung cấp dịch vụ tàu biển
105
40 QCVN 81:2014/BGTVT Quy chuẩn kỹ thuật quốc gia về phân cấp và đóng
du thuyền
617
41 QCVN 92:2015/BGTVT Quy chuẩn kỹ thuật quốc gia về kiểm tra và đóng
tàu biển vỏ gỗ
46
42 QCVN 94:2016/BGTVT Quy chuẩn kỹ thuật quốc gia về báo động và chỉ
báo trên tàu biển
83
43 Sửa đổi 1 :2016 QCVN
21:2015/BGTVT
Quy chuẩn kỹ thuật Quốc gia về quy phạm phân
cấp và đóng tàu biển vỏ thép
273
Viễn thông Trở về đầu trang
Page 6
Dịch vụ Cung cấp Thông tin Trọn gói Tháng 12/2017 6/50
44 QCVN 110:2017/BTTTT Quy chuẩn kỹ thuật quốc gia về thiết bị trạm gốc
thông tin di động E-UTRA- phần truy cập vô tuyến
66
45 QCVN 111:2017/BTTTT Quy chuẩn kỹ thuật quốc gia về thiết bị trạm lập
thông tin di động E-UTRA FDD phần truy cập nhập
vô tuyến
42
46 QCVN 113:2017/BTTTT Quy chuẩn kỹ thuật quốc gia về tương thích điện từ
đối với thiết bị DECT
14
47 QCVN 114:2017/BTTTT Quy chuẩn kỹ thuật quốc gia về tương thích điện từ
đối với thiết bị truyền dẫn vô tuyến cố định và thiết
bị phụ trợ
17
48 QCVN 115:2017/BTTTT Quy chuẩn kỹ thuật quốc gia về mức âm lượng và
mứac đỉnh thực cực đại của tín hiệu âm thanh trong
các chương trình truyền hình
33
49 QCVN 116:2017/BTTTT Quy chuẩn kỹ thuật quốc gia về thiết bị trạm mặt
đất di động hoạt động trong băng tần Ku
40
Quân sự Trở về đầu trang
50 QCVN 03:2017/BQP Quy chuẩn kỹ thuật quốc gia về hủy đốt đạn súng,
ngòi đạn và hóa cụ
17
Công nghệ dệt may Trở về đầu trang
51 QCVN 01:2017/BCT Quy chuẩn kỹ thuật quốc gia về mức hạn hàm
lượng formaidehyt và các amin thơm chuyển hóa từ
thuốc nhuộm azo trong sản phẩm dệt may
24
Ecgônômi (Công thái học) Trở về đầu trang
52 TCVN 7318-1:2013 Thay
thế:TCVN 7213-1:2002
Ecgônômi. Yêu cầu ecgônômi đối với công việc
văn phòng có sử dụng thiết bị hiển thị đầu cuối
(VDT). Phần 1: Giới thiệu chung
27
53 TCVN 7318-2:2013 Ecgônômi. Yêu cầu ecgônômi đối với công việc
văn phòng có sử dụng thiết bị hiển thị đầu cuối
(VDT). Phần 2: Hướng dẫn các yêu cầu nhiệm vụ
9
54 TCVN 7318-4:2013 Thay
thế:TCVN 7318-4:2003
Ecgônômi. Yêu cầu ecgônômi đối với công việc
văn phòng có sử dụng thiết bị hiển thị đầu cuối
(VDT). Phần 4: Yêu cầu về bàn phím
32
55 TCVN 7318-5:2013 Ecgônômi. Yêu cầu ecgônômi đối với công việc
văn phòng có sử dụng thiết bị hiển thị đầu cuối
(VDT). Phần 5: Yêu cầu về bố trí vị trí và tư thế
làm việc
35
56 TCVN 7318-6:2013 Ecgônômi. Yêu cầu ecgônômi đối với công việc
văn phòng có sử dụng thiết bị hiển thị đầu cuối
(VDT). Phần 6: Hướng dẫn về môi truờnglàm việc
43
Quản lý môi trường Trở về đầu trang
Page 7
Dịch vụ Cung cấp Thông tin Trọn gói Tháng 12/2017 7/50
57 QCVN 64:2017/BTNMT Quy chuẩn kỹ thuật quốc gia về mã luật khí tượng
trên cao và ra đa thời tiết
52
Phương tiện đo - Quy trình kiểm định Trở về đầu trang
58 ĐLVN 05:2017 Thay
thế:ĐLVN 05:2011
Xi téc ô tô. Quy trình kiểm định 21
59 ĐLVN 157 : 2017 Phương tiện đo kiểm tra tốc độ phương tiện giao
thông. Quy trình kiểm định
21
60 ĐLVN 158:2017 Thay thế:
ĐLVN 158:2005
Nhiệt kế thủy tinh. Rượu có cơ cấu cực tiểu. Quy
trình kiểm định
10
61 ĐLVN 159:2017 Thay thế:
ĐLVN 159:2005
Nhiệt kế thủy tinh. Thủy ngân có cơ cấu cực đại.
Quy trình kiểm định
9
62 ĐLVN 17:2017 Thay thế:
ĐLVN 17:2009
Đồng hồ đo nước. Quy trình kiểm định 20
63 ĐLVN 20:2017 Thay thế:
ĐLVN 20:2009
Nhiệt kế thủy tinh. Chất lỏng. Quy trình kiểm định 14
64 ĐLVN 21:2017 Thay thế:
ĐLVN 21:1998
Nhiệt kế y học thủy tinh. Thủy ngân có cơ cấu cực
đại. Quy trình kiểm định
8
65 ĐLVN 220:2017 Thay
thế:ĐLVN 220:2010
Phương tiện đo để kiểm tra tốc độ phương tiện giao
thông. Quy trình thử nghiệm
13
66 ĐLVN 23:2017 Thay thế:
ĐLVN 23:1998
Nhiệt kế y học điện tử tiếp xúc có cơ cấu cực đại.
Quy trình kiểm định
7
67 ĐLVN 26:2017 Thay thế:
ĐLVN 26 : 2012
Cân kiểm tra tải trọng xe cơ giới xách tay. Quy
trình kiểm định
9
68 ĐLVN 31:2017 Thay thế:
ĐLVN 31:2001
Phương tiện đo pH. Quy trình kiểm định 8
69 ĐLVN 331:2017 Máy thở dùng trong y tế. Quy trình kiểm định 16
70 ĐLVN 332:2017 Máy theo dõi bệnh nhân. Quy trình kiểm định 17
71 ĐLVN 43:2017 Thay thế:
ĐLVN 43:2009
Phương tiện đo điện tim. Quy trình kiểm định 28
72 ĐLVN 44:2017 Thay thế:
ĐLVN 44:2009
Phương tiện đo điện não. Quy trình kiểm định 27
73 ĐLVN 70:2017 Thay thế:
ĐLVN 70:2001
Tỷ trọng kế. Quy trình kiểm định 13
74 ĐLVN 80:2017 Thay thế:
ĐLVN 80:2002
Phương tiện đo tổng chất rắn hòa tan trong nước.
Quy trình kiểm định
8
75 ĐLVN 90:2017 Thay thế:
ĐLVN 90:2001
Phương tịên đo hàm lượng bụi tổng trong không
khí. Quy trình kiểm định
9
76 ĐLVN 96:2017 Thay thế:
ĐLVN 96:2002
Đồng hồ đo nước. Quy trình thử nghiệm 46
Page 8
Dịch vụ Cung cấp Thông tin Trọn gói Tháng 12/2017 8/50
TT Số hiệu tiêu chuẩn Tên tiêu chuẩn A4
TIÊU CHUẨN NƯỚC NGOÀI
Vi sinh vật thực phẩm, nước Trở về đầu trang
77 17/30342994 DC BS ISO 17410. Microbiology of the food chain.
Horizontal method for the enumeration of
psychrotrophic microorganisms
16
78 DIN 10164-1 Microbiological examination of meat and meat
products - Determination of Enterobacteriaceae -
Part 1: Spatula method (reference method)
11
79 DIN 10164-2 Microbiological examination of meat and meat
products - Determination of Enterobacteriaceae -
Part 2: Drop plating method
11
80 ISO 11133 FDAM 1 Microbiology of food, animal feed and water -
Preparation, production, storage and performance
testing of culture media; Amendment 1
7
Phương pháp thử và phân tích đối với thực phẩm; Ngũ cốc Trở về đầu trang
81 DIN EN 17203 Foodstuffs - Determination of citrinin in food by
liquid chromatography tandem mass spectrometry
(LC-MS/MS); German and English version prEN
17203:2017
53
82 ISO 11746 AMD 1 Rice - Determination of biometric characteristics of
kernels; Amendment 1
1
Sữa và các sản phẩm sữa Trở về đầu trang
83 17/30366628 DC BS ISO 21422. Milk, milk products, infant formula
and adult nutritionals. Determination of chloride.
Potentiometric titration method
23
84 17/30366631 DC BS ISO 15151. Milk, milk products, infant formula
and adult nutritionals. Determination of minerals
and trace elements. Inductively coupled plasma
atomic emission spectrometry (ICP-AES) method
38
85 17/30366634 DC BS ISO 21424. Milk, milk products, infant formula
and adult nutritionals. Determination of minerals
and trace elements. Inductively coupled plasma
mass spectrometry (ICP-MS) method
41
86 DIN 10486 Milk and milk products - Determination of lactose
content of lactose-reduced milk and milk products
in the presence of glucose - Enzymatic method
13
Đường. Sản phẩm đường Trở về đầu trang
87 DIN 10750-1 Analysis of honey - Determination of diastase
activity - Part 1: Schade method
10
88 DIN 10751-3 Analysis of honey - Determination of content of 12
Page 9
Dịch vụ Cung cấp Thông tin Trọn gói Tháng 12/2017 9/50
TT Số hiệu tiêu chuẩn Tên tiêu chuẩn A4
hydroxymethylfurfural - Part 3: High performance
liquid chromatographic method
89 DIN 10752-1 Analysis of honey - Determination of water content
- Part 1: Analogue refractometric method
8
Nhà máy và thiết bị trong công nghiệp thực phẩm Trở về đầu trang
90 DIN 10507 Food hygiene - Production and dispense of cream
with cream whipping machines - Hygiene
requirements, testing
11
91 DIN 6650-10 Dispense systems for draught beverages - Part 10:
Qualitative requirements for dispense of beer
10
Nông nghiệp (Máy móc, dụng cụ và thiết bị nông nghiệp) Trở về đầu trang
92 17/30323593 DC BS ISO 20112-1. Tractors and machinery for
agriculture and forestry. Camera interface between
tractor and implement. Part 1. Analogue camera
interface
13
Nông nghiệp (Phân bón) Trở về đầu trang
93 17/30333965 DC BS ISO 20977. Liming materials. Determination of
size distribution by dry and wet sieving
20
Thức ăn gia súc Trở về đầu trang
94 DIN EN 17194 Animal feeding stuffs - Methods of sampling and
analysis - Determination of Deoxynivalenol,
Aflatoxin B1, Fumonisin B1&B2, T-2 & HT-2
toxins, Zearalenone and Ochratoxin A in feed
materials and compound feed by LC-MS/MS;
German and English version prEN 17194:2017
70
Công nghệ hóa chất Trở về đầu trang
95 DIN 28125-1 Round hinged closures - Part 1: Nominal diameter
DN 150 to DN 800
43
96 DIN EN 14175-3 Fume cupboards - Part 3: Type test methods;
German and English version prEN 14175-3:2017
48
97 DIN EN 16956 Cosmetics - Analytical methods - HPLC/UV
method for the identification and assay of
hydroquinone, ethers of hydroquinone and
corticosteroids in skin whitening cosmetic products;
German version EN 16956:2017
42
98 JIS K 4822:2017/AMD1 Reagents for stability tests of explosives
(Amendment 1)
4
99 KS E 3012 Method for determination of combined water in iron
ores
15
100 KS E 3014 Methods for determination of sulfur in iron ores 19
Page 10
Dịch vụ Cung cấp Thông tin Trọn gói Tháng 12/2017 10/50
TT Số hiệu tiêu chuẩn Tên tiêu chuẩn A4
101 KS E 3044 Methods for determination of bismuth in iron ores 12
102 KS E 3046 Methods for determination of phosphorus in
manganese ores
10
103 KS E 3062 Methods for determination of antimony in ores 45
104 KS E 3070 Methods for determination of bismuth in ores 24
105 KS E 3074 Method for determination of silicon dioxide in
chrome ores
10
106 KS E 3075 Method for X-ray fluorescence spectrometric
analysis of limestone and dolomite
9
107 KS E 3076 Methods for X-ray fluorescence spectrometric
analysis of silica stone and silica sand
9
108 KS E 3088 Titanium ores-Methods for determination of iron 19
109 KS E 3089 Methods for determination of silicon dioxide in
titanium ores
11
110 KS E 3090 Methods for determination of vanadium in titanium
ores
13
Dầu mỏ và các công nghệ liên quan Trở về đầu trang
111 17/30313373 DC BS ISO 21809-11. Petroleum and natural gas
industries. External coatings for buried or
submerged pipelines used in pipeline transportation
systems. Part 11. Coating repairs on rehabilitation
55
112 17/30340314 DC BS EN ISO 3405. Petroleum and related products
from natural or synthetic sources. Determination of
distillation characteristics at atmospheric pressure
43
113 17/30365049 DC BS EN 17181. Lubricants. Determination of aerobic
biological degradation of fully formulated
lubricants in an aqueous solution. Test method
based on CO2-production
26
114 17/30366325 DC BS EN ISO 3104. Petroleum products. Transparent
and opaque liquids. Determination of kinematic
viscosity and calculation of dynamic viscosity
30
115 BS ISO 20729:2017 Natural gas. Determination of sulfur compounds.
Determination of total sulfur content by ultraviolet
fluorescence method
18
116 DIN EN 13303 Bitumen and bituminous binders - Determination of
the loss in mass after heating of industrial bitumen;
German version EN 13303:2017
13
117 JIS K 2228:2017
Replaces:JIS K 2228:2009
Rubber lubricant of non-petroleum base for motor
vehicle brake systems
16
Page 11
Dịch vụ Cung cấp Thông tin Trọn gói Tháng 12/2017 11/50
TT Số hiệu tiêu chuẩn Tên tiêu chuẩn A4
118 JIS K 2233:2017
Replaces:JIS K 2233:2006
Non-petroleum base motor vehicle brake fluids 58
Công nghệ nano Trở về đầu trang
119 PD ISO/TR 19057:2017 Nanotechnologies. Use and application of acellular
in vitro tests and methodologies to assess
nanomaterial biodurability
56
Cao su và Chất dẻo Trở về đầu trang
120 ASTM G137-97(2017)
Replaces: ASTM G137-
97(2009)
Standard Test Method for Ranking Resistance of
Plastic Materials to Sliding Wear Using a Block-
On-Ring Configuration
7
121 ASTM G176-03(2017)
Replaces: ASTM G176-
03(2009)
Standard Test Method for Ranking Resistance of
Plastics to Sliding Wear Using Block-on-Ring Wear
Test#x2014;Cumulative Wear Method
9
122 BS ISO 7743:2017 Rubber, vulcanized or thermoplastic. Determination
of compression stress-strain properties
30
123 DIN 53474 Testing of plastics, rubber and elastomers -
Determination of the chlorine content (Wickbold-
Combustion)
12
124 DIN EN 513 Plastics - Poly(vinyl chloride) (PVC) based profiles
- Determination of the resistance to artificial
weathering; German and English version prEN
513:2017
29
125 JIS A 9511:2017
Replaces:JIS A 9511:2009
Preformed cellular plastics thermal insulation
materials
35
126 JIS K 6251:2017
Replaces:JIS K 6251:2010
Rubber, vulcanized or thermoplastics.
Determination of tensile stress-strain properties
32
127 KS M 3862 Polyethylene foam for thermal insulation 11
Phụ tùng đường ống và đường ống (Ống nhựa; Ống bằng gang thép; Quy định chung;
Mặt bích, mối ghép; Vòi hút) Trở về đầu trang
128 17/30362692 DC BS EN 598. Coated and lined ductile iron pipes,
fittings and their joints for sewerage and drainage
applications. Products characteristics and test and
assessment methods
77
129 17/30363921 DC BS EN 17176-2. Plastics piping systems for water
supply and for buried and above ground drainage,
sewerage and irrigation under pressure. Oriented
unplasticized poly(vinyl chloride) (PVC-O). Part 2.
Pipes
31
130 17/30363924 DC BS EN 17176-1. Plastics piping systems for water
supply and for buried and above ground drainage,
16
Page 12
Dịch vụ Cung cấp Thông tin Trọn gói Tháng 12/2017 12/50
TT Số hiệu tiêu chuẩn Tên tiêu chuẩn A4
sewerage and irrigation under pressure. Oriented
unplasticized poly(vinyl chloride) (PVC-O). Part 1.
General
131 17/30363927 DC BS EN 17176-3. Plastic piping systems for water
supply and for buried and above ground drainage,
sewerage and irrigation under pressure. Oriented
unplasticized poly(vinyl chloride) (PVC-O). Part 3.
Fittings
22
132 17/30363930 DC BS EN 17176-5. Plastic piping systems for water
supply and for buried and above ground drainage,
sewerage and irrigation under pressure. Oriented
unplasticized poly(vinyl chloride) (PVC-O). Part 5.
Fitness for purpose of the system
15
133 17/30364341 DC BS EN 1519-1. Plastics piping systems for soil and
waste discharge (low and high temperature) within
the building structure. Polyethylene (PE). Part 1.
Requirements for pipes, fittings and the system
38
134 BS ISO 10639:2017 Plastics piping systems for pressure and non-
pressure water supply. Glass-reinforced
thermosetting plastics (GRP) systems based on
unsaturated polyester (UP) resin
66
135 DIN 4815-6 Rubber and plastics hoses for liquefied petroleum
gas - Part 6: Double-walled hose assemblies for
connection to anti-leakage devices in line with DIN
4811
15
136 DIN 86037-1 Loose flanges and welding necks for pipes of
copper-nickel-alloys - Part 1: Assembly
8
137 DIN 86037-2 Loose flanges and welding necks for pipes of
copper-nickel-alloys - Part 2: Welding necks
8
138 DIN 86037-3 Loose flanges and welding necks for pipes of
copper-nickel-alloys - Part 3: Loose flanges
8
139 DIN EN 13480-1 Metallic industrial piping - Part 1: General; German
version EN 13480-1:2017
20
140 DIN EN 13480-1/A1 Metallic industrial piping - Part 1: General; German
and English version EN 13480-1:2017/prA1:2017
10
141 DIN EN 13480-2 Metallic industrial piping - Part 2: Materials;
German version EN 13480-2:2017
83
142 DIN EN 13480-3 Metallic industrial piping - Part 3: Design and
calculation; German version EN 13480-3:2017
367
143 DIN EN 13480-4 Metallic industrial piping - Part 4: Fabrication and 51
Page 13
Dịch vụ Cung cấp Thông tin Trọn gói Tháng 12/2017 13/50
TT Số hiệu tiêu chuẩn Tên tiêu chuẩn A4
installation; German version EN 13480-4:2017
144 DIN EN 13480-5 Metallic industrial piping - Part 5: Inspection and
testing; German version EN 13480-5:2017
38
145 DIN EN 13480-6 Metallic industrial piping - Part 6: Additional
requirements for buried piping; German version EN
13480-6:2017
39
146 DIN EN 13480-8 Metallic industrial piping - Part 8: Additional
requirements for aluminium and aluminium alloy
piping; German version EN 13480-8:2017
49
147 ISO/FDIS 11296-4 Plastics piping systems for renovation of
underground non-pressure drainage and sewerage
networks - Part 4: Lining with cured-in-place pipes
39
148 ISO/FDIS 11297-4 Plastics piping systems for renovation of
underground drainage and sewerage networks under
pressure - Part 4: Lining with cured-in-place pipes
12
149 JIS G 3446:2017 Stainless steel tubes for machine and structural
purposes
17
150 JIS G 3454:2017
Replaces:JIS G 3454:2012
Carbon steel pipes for pressure service 18
Hệ thống và kết cấu chất lỏng (Ống dẫn và khớp nối; Van) Trở về đầu trang
151 17/30364363 DC BS EN 14071 AMD1. LPG equipment and
accessories. Pressure relief valves for LPG pressure
vessels. Ancillary equipment
8
152 BS ISO 5782-1:2017 Pneumatic fluid power. Compressed air filters.
Main characteristics to be included in supplier's
literature and product-marking requirements
18
153 DIN 4811 Pressure regulators for LPG and safety devices -
Requirements
39
154 ISO/TS 11686 Connectors for fluid power and general use -
Assembly instructions for connectors with
adjustable stud ends and O-ring sealing
11
Hệ thống và kết cấu chất lỏng (Thiết bị chứa chất lỏng; Hệ thống truyền dẫn chất lỏng;
Công nghệ chân không Trở về đầu trang
155 17/30331894 DC BS ISO 21360-4. Vacuum technology. Standard
methods for measuring vacuum-pump performance.
Part 4. Turbomolecular vacuum pumps
18
156 17/30349154 DC BS ISO 20146. Vacuum technology. Vacuum
gauges. Specifications, calibration and
measurement uncertainties for capacitance
diaphragm gauge
24
Page 14
Dịch vụ Cung cấp Thông tin Trọn gói Tháng 12/2017 14/50
TT Số hiệu tiêu chuẩn Tên tiêu chuẩn A4
157 17/30362702 DC BS EN 1440 AMD1. LPG equipment and
accessories. Transportable refillable traditional
welded and brazed steel Liquefied Petroleum Gas
(LPG) cylinders. Periodic inspection
7
158 DIN EN 13445-1 Unfired pressure vessels - Part 1: General; German
version EN 13445-1:2014
46
159 DIN EN 13445-2 Unfired pressure vessels - Part 2: Materials;
German version EN 13445-2:2014
86
160 DIN EN 13445-3 Unfired pressure vessels - Part 3: Design; German
version EN 13445-3:2014, only on CD-ROM
869
161 DIN EN 13445-3/A8 Unfired pressure vessels - Part 3: Design; German
and English version EN 13445-3:2014/prA8:2017
101
162 DIN EN 13445-4 Unfired pressure vessels - Part 4: Fabrication;
German version EN 13445-4:2014
73
163 DIN EN 13445-5 Unfired pressure vessels - Part 5: Inspection and
testing; German version EN 13445-5:2014
81
164 DIN EN 13445-6 Unfired pressure vessels - Part 6: Requirements for
the design and fabrication of pressure vessels and
pressure parts constructed from spheroidal graphite
cast iron; German version EN 13445-6:2014
63
165 DIN EN 13445-8 Unfired pressure vessels - Part 8: Additional
requirements for pressure vessels of aluminium and
aluminium alloys; German version EN 13445-
8:2014
41
166 DIN EN 14015 Specification for the design and manufacture of site
built, vertical, cylindrical, flat-bottomed, above
ground, welded, steel tanks for the storage of
liquids at ambient temperature and above; German
and English version prEN 14015:2017
690
167 ISO 18237 Hydraulic fluid power - Method for evaluating
water separation performance of dehydrators
17
168 ISO/DIS 16964 Gas cylinders - Flexible hoses assemblies -
Specification and testing
15
Năng lượng và truyền nhiệt (Năng lượng hạt nhân; Tuabin khí; Tuabin gió)
Trở về đầu trang
169 17/30331603 DC BS ISO 9161. Uranium dioxide powder.
Determination of apparent density and tap density
15
170 17/30347657 DC BS ISO 18256-1. Nuclear fuel technology.
Dissolution of plutonium dioxide-containing
13
Page 15
Dịch vụ Cung cấp Thông tin Trọn gói Tháng 12/2017 15/50
TT Số hiệu tiêu chuẩn Tên tiêu chuẩn A4
materials. Part 1. Dissolution of plutonium dioxide
powders
171 17/30347660 DC BS ISO 18256-2. Nuclear fuel technology.
Dissolution of plutonium dioxide-containing
materials. Part 2. Dissolution of MOX pellets and
powders
13
172 17/30357475 DC BS IEC/IEEE 63113. Nuclear facilities.
Instrumentation important to safety. Spent fuel pool
instrumentation
26
173 BS ISO 18888:2017 Gas turbine combined cycle power plants. Thermal
performance tests
82
174 DIN 18088-1 Structures for wind turbines and platforms - Part 1:
Basic principles and actions
59
175 DIN 18088-2 Structures for wind turbines and platforms - Part 2:
Concrete structures
18
176 DIN 18088-3 Structures for wind turbines and platforms - Part 3:
Steel structures
40
177 DIN 18088-4 Structures for wind turbines and platforms - Part 4:
Soil and foundation elements
33
178 DIN 18088-5 Structures for wind turbines and platforms - Part 5:
Joints between steel structures and concrete
structures
33
179 PD CLC/TS 61400-26-
1:2017
Wind turbines. Time-based availability for wind
turbine generating systems
58
Khai thác mỏ và khoáng sản (Khoáng sản kim loại và phi kim loại ) Trở về đầu trang
180 17/30364325 DC BS EN 1009-4. Machines for mechanical
processing of minerals and similar solid materials.
Safety. Part 4. Specific requirements for screening
machinery
32
181 17/30364328 DC BS EN 1009-5. Machines for mechanical
processing of minerals and similar solid materials.
Safety. Part 5. Specific requirements for cleaning,
recycling, sorting and mud treatment machinery
39
182 17/30364332 DC BS EN 1009-2. Machines for mechanical
processing of minerals and similar solid materials.
Safety. Part 2. Specific requirements for feeding
machinery and continuous handling equipment
24
183 17/30364335 DC BS EN 1009-3. Machines for mechanical
processing of minerals and similar solid materials.
Safety. Part 3. Specific requirements for crushing
30
Page 16
Dịch vụ Cung cấp Thông tin Trọn gói Tháng 12/2017 16/50
TT Số hiệu tiêu chuẩn Tên tiêu chuẩn A4
and milling machinery
184 17/30364338 DC BS EN 1009-1. Machines for mechanical
processing of minerals and similar solid materials.
Safety. Part 1. Common requirements for partly
completed machinery and processing plants
74
185 ASTM E1070-17a Replaces:
ASTM E1070-11
Standard Test Method for Determination of
Phosphorus in Iron Ores by Phospho-Molybdenum-
Blue Spectrophotometry
4
186 ASTM E815-17b Replaces:
ASTM E815-17
Standard Test Method for Determination of
Calcium Fluoride in Fluorspar by EDTA
Complexometric Titrimetry
4
187 BS ISO 19434:2017 Mining. Classification of mine accidents 34
188 DIN EN 14157 Natural stone test methods - Determination of the
abrasion resistance; German version EN
14157:2017
18
Phương tiên giao thông đường bộ - Vận tải Trở về đầu trang
189 17/30346258 DC BS ISO 8820-6. Road vehicles. Fuse-links. Part 6.
Single-bolt fuse-links
16
190 17/30366307 DC BS ISO 6742-2 AMD1. Cycles. Lighting and retro-
reflective devices. Part 2. Retro-reflective devices
7
191 DIN EN 15194 Cycles - Electrically power assisted cycles - EPAC
Bicycles; German version EN 15194:2017
141
192 ISO/DIS 17840-2 Road vehicles - Information for first and second
responders - Part 2: Rescue sheet for buses, coaches
and heavy commercial vehicles
18
193 ISO/DIS 17840-3 Road vehicles - Information for first and second
responders - Part 3: Emergency response guide
template
43
194 ISO/TS 17536-2 Road vehicles - Aerosol separator performance test
for internal combustion engines - Part 2: Laboratory
test method
24
195 JIS D 9111:2016
Replaces:JIS D 9111:2010
Cycles -- Classification and essential characteristics 36
196 KS R 4100 Electric mopeds and Motorcycles ? Methods
measuring the performance of regenerative braking
system
14
Đường sắt Trở về đầu trang
197 17/30354169 DC BS EN 14067-4 AMD1. Railway applications. 8
Page 17
Dịch vụ Cung cấp Thông tin Trọn gói Tháng 12/2017 17/50
TT Số hiệu tiêu chuẩn Tên tiêu chuẩn A4
Aerodynamics. Part 4. Requirements and test
procedures for aerodynamics on open track
198 BS EN 15273-
1:2013+A1:2016
Railway applications. Gauges. General. Common
rules for infrastructure and rolling stock
246
199 DIN 27201-6 State of railway vehicles - Basic principles and
production technology - Part 6: Welding
25
200 DIN EN 12082 Railway applications - Axleboxes - Performance
testing; German version EN 12082:2017
54
201 DIN EN 14033-4 Railway applications - Track - Railbound
construction and maintenance machines - Part 4:
Technical requirements for running, travelling and
working on urban rail; German and English version
prEN 14033-4:2017
44
202 DIN EN 16186-2 Railway applications - Driver's cab - Part 2:
Integration of displays, controls and indicators;
German version EN 16186-2:2017, with CD-ROM
77
203 DIN EN 16922 Railway applications - Ground based services -
Vehicle waste water discharge equipment; German
version EN 16922:2017
28
Đóng tàu và Kết cấu tàu thủy Trở về đầu trang
204 BS ISO 21070:2017 Ships and marine technology. Marine environment
protection. Management and handling of shipboard
garbage
28
205 DIN 83329 Ships and marine technology - Polypropylene fibre
ropes made of yarns produced on bast fibre
spinning systems
8
206 DIN EN 28846/A100 Small craft - Electrical devices - Protection against
ignition of surrounding flammable gases (ISO
8846:1990); German version EN ISO 8846:2017;
Amendment A100
7
207 DIN EN 28848/A100 Small craft - Remote steering systems (ISO
8848:1990); German version EN ISO 8848:2017;
Amendment A100
7
208 DIN EN 29775/A100 Small craft - Remote steering systems for single
outboard motors of 15 kW to 40 kW power (ISO
9775:1990); German version EN ISO 9775:2017;
Amendment A100
7
Kỹ thuật máy bay và tàu vũ trụ Trở về đầu trang
209 17/30355218 DC BS ISO 16091. Space systems. Integrated logistic
support
30
Page 18
Dịch vụ Cung cấp Thông tin Trọn gói Tháng 12/2017 18/50
TT Số hiệu tiêu chuẩn Tên tiêu chuẩn A4
210 17/30369678 DC BS EN 7010. Aerospace series. User guide for
creation and designation of bolts
36
211 BS EN 2037:2017 Aerospace series. Hexagonal steel bars drawn.
Dimensions. Tolerances h 11 and h 12
10
212 BS EN 2850:2017 Aerospace series. Carbon fibre thermosetting resin -
Unidirectional laminates. Compression test parallel
to fibre direction
18
213 BS EN 3094:2017 Aerospace series. Sealants. Test method.
determination of the application time
8
214 BS EN 4652-421:2017 Aerospace series. Connectors, coaxial, radio
frequency. Type 4, C interface. Crimp assembly
version. Right angle plug. Product standard
14
215 BS ISO 18322:2017 Space systems. General management requirements
for space test centres
32
216 DIN 65046-6 Aerospace series - Methods of test for surface
protective coatings; Paints and varnishes - Part 6:
Chemical and electroplated coatings
8
217 DIN EN 16603-70-41 Space engineering - Telemetry and telecommand
packet utilization; English version EN 16603-70-
41:2017, only on CD-ROM
649
218 DIN EN 2279 Aerospace series - Steel FE-PM37 - 900 MPa <=
Rm <= 1100 MPa - Forgings - De <= 150 mm;
German and English version FprEN 2279:2017
18
219 DIN EN 2280 Aerospace series - Steel FE-PM37 - 900 MPa <=
Rm <= 1100 MPa - Sheet - a <= 6 mm; German and
English version FprEN 2280:2017
18
220 DIN EN 2287 Aerospace series - Bush, plain, in corrosion
resisting steel with self-lubricating liner -
Dimensions and loads; German and English version
EN 2287:2017
21
221 DIN EN 2591-100 Aerospace series - Elements of electrical and optical
connection - Test methods - Part 100: General;
German and English version FprEN 2591-100:2017
53
222 DIN EN 3264 Aerospace series - Pipe coupling 8°30' in titanium
alloy - Thrust wire nuts; German and English
version FprEN 3264:2017
15
223 DIN EN 3646-003 Aerospace series - Connectors, electrical, circular,
bayonet coupling, operating temperature 175 °C or
200 °C continuous - Part 003: Receptacle, square
flange mounting - Product standard; German and
18
Page 19
Dịch vụ Cung cấp Thông tin Trọn gói Tháng 12/2017 19/50
TT Số hiệu tiêu chuẩn Tên tiêu chuẩn A4
English version FprEN 3646-003:2017
224 DIN EN 3719 Aerospace series - Aluminium or aluminium alloy
conductors for electrical cables - Product standard;
German and English version FprEN 3719:2017
18
225 DIN EN 3820 Aerospace series - Metric bolts, normal hexagon
head, coarse tolerance normal shank, short thread,
in titanium alloy, anodized, MoS2 lubricated -
Classification: 1100 MPa (at ambient
temperature)/315 °C; German and English version
EN 3820:2017
23
226 DIN EN 4008-004 Aerospace series - Elements of electrical and optical
connection - Crimping tools and associated
accessories - Part 004: Die for crimping tool
M22520/5-01 - Product standard; German and
English version EN 4008-004:2017
17
227 DIN EN 4165-022 Aerospace series - Connectors, electrical,
rectangular, modular - Operating temperature 175
°C continuous - Part 022: Insertion/extraction tool
for removal of modules - Product standard; German
and English version FprEN 4165-022:2017
17
228 DIN EN 4604-010 Aerospace series - Cable, electrical, for signal
transmission - Part 010: Cable, coaxial, light
weight, 50 Ohms, 200 °C, type KX (light WD) -
Product standard; German and English version
FprEN 4604-010:2017
25
229 DIN EN 4702-02 Aerospace series - Quick release fastening systems
for non-structural and lining applications - Part 02:
Spring clamp stud combination; German and
English version EN 4702-02:2017
14
230 DIN EN 4702-03 Aerospace series - Quick release fastening systems
for non-structural and lining applications - Part 03:
Stud - quick-release and locking; German and
English version EN 4702-03:2017
29
231 DIN EN 4702-04 Aerospace series - Quick release fastening systems
for non-structural and lining applications - Part 04:
Spring clamp; German and English version EN
4702-04:2017
18
232 DIN EN 4702-05 Aerospace series - Quick release fastening systems
for non-structural and lining applications - Part 05:
Retaining washer; German and English version EN
4702-05:2017
23
Page 20
Dịch vụ Cung cấp Thông tin Trọn gói Tháng 12/2017 20/50
TT Số hiệu tiêu chuẩn Tên tiêu chuẩn A4
233 DIN EN 4838-005 Aerospace series - Arc fault circuit breakers, single-
pole, temperature compensated, rated current 3 A to
25 A - 115 V a.c. 400 Hz Constant Frequency - Part
005: With polarized signal contact - Product
standard; German and English version FprEN 4838-
005:2017
26
234 DIN EN 9117 Aerospace series - Delegated Product Release
Verification; German and English version EN
9117:2017
26
235 DIN EN 9300-005 Aerospace series - LOTAR - LOng Term Archiving
and Retrieval of digital technical product
documentation such as 3D, CAD and PDM data -
Part 005: Authentication and Verification; German
and English version EN 9300-005:2017
38
236 DIN EN 9300-007 Aerospace series - LOTAR -LOng Term Archiving
and Retrieval of digital technical product
documentation such as 3D, CAD and PDM data -
Part 007: Terms and References; German and
English version EN 9300-007:2017
49
237 ISO 18322 Space systems - General management requirements
for space test centres
23
Chế tạo (Hệ thống tự động hóa công nghiệp) Trở về đầu trang
238 BS ISO 15746-2:2017 Automation systems and integration. Integration of
advanced process control and optimization
capabilities for manufacturing systems. Activity
models and information exchange
52
Chế tạo (Hàn đồng và hàn thiếc) Trở về đầu trang
239 BS EN ISO 22829:2017 Resistance welding equipment. Transformers.
Integrated transformer-rectifier units for welding
guns operating at 1 000 Hz
22
240 DIN EN 14728 Imperfections in thermoplastic welds -
Classification; German and English version prEN
14728:2017
61
241 ISO 17640 Non-destructive testing of welds - Ultrasonic testing
- Techniques, testing levels, and assessment
29
242 ISO/FDIS 11666 Non-destructive testing of welds - Ultrasonic testing
- Acceptance levels
17
243 JIS Z 3119:2017
Replaces:JIS Z 3119:2006
Methods of measurement for ferrite content in
austenitic and austenitic - ferritic stainless steel
deposited metals
18
Page 21
Dịch vụ Cung cấp Thông tin Trọn gói Tháng 12/2017 21/50
TT Số hiệu tiêu chuẩn Tên tiêu chuẩn A4
244 JIS Z 3128:2017
Replaces:JIS Z 3128:1996
Sampling method of impact test specimen from
welded joint
7
245 JIS Z 3129:2017
Replaces:JIS Z 3129:2005
Preparation of test specimens taken from butt
welded test pieces for one-run and two-run
technique in steel
9
246 JIS Z 3140:2017
Replaces:JIS Z 3140:1989
Method of inspection and acceptance levels for
resistance spot welds
9
247 JIS Z 3282:2017
Replaces:JIS Z 3282:2006
Soft solders. Chemical compositions and forms 17
248 JIS Z 3283:2017
Replaces:JIS Z 3283:2006
Resin flux cored solders 12
249 JIS Z 3316:2017
Replaces:JIS Z 3316:2011
Solid wires and rods for TIG welding of mild steel,
high strength steel and low temperature service steel
27
250 JIS Z 3334:2017
Replaces:JIS Z 3334:2011
Rods, solid wires and strip electrodes for welding of
nickel and nickel-alloy
14
251 JIS Z 3910:2017
Replaces:JIS Z 3910:2008
Methods for chemical analysis of solder 38
Chế tạo (Dụng cụ cầm tay) Trở về đầu trang
252 17/30354011 DC BS EN 63103. Apparatus for lighting purposes.
Non-active mode power measurement
39
253 IEC 62841-3-14*CEI
62841-3-14
Electric motor-operated hand-held tools,
transportable tools and lawn and garden machinery
- Safety - Part 3-14: Particular requirements for
transportable drain cleaners
45
254 IEC 62841-4-1*CEI 62841-
4-1
Electric motor-operated hand-held tools,
transportable tools and lawn and garden machinery
- Safety - Part 4-1: Particular requirements for chain
saws
111
Chế tạo (Xử lý bề mặt) Trở về đầu trang
255 17/30347966 DC BS EN ISO 2085. Anodizing of aluminium and its
alloys. Check for continuity of thin anodic
oxidation coatings. Copper sulfate test
9
256 17/30347969 DC BS EN ISO 2376. Anodizing of aluminium and its
alloys. Determination of electric breakdown
potential
10
257 17/30347972 DC BS EN ISO 3211. Anodizing of aluminium and its
alloys. Assessment of resistance of anodic oxidation
coatings to cracking by deformation
11
Page 22
Dịch vụ Cung cấp Thông tin Trọn gói Tháng 12/2017 22/50
TT Số hiệu tiêu chuẩn Tên tiêu chuẩn A4
258 17/30347975 DC BS EN ISO 6581. Anodizing of aluminium and its
alloys. Determination of the comparative fastness to
ultraviolet light and heat of coloured anodic
oxidation coatings
12
259 17/30347978 DC BS EN ISO 8993. Anodizing of aluminium and its
alloys. Rating system for the evaluation of pitting
corrosion. Chart method
18
260 ASTM D4370-01(2017)
Replaces: ASTM D4370-
01(2006)
Standard Test Methods for Acid and Base
Milliequivalent Content of Electrocoat Bath
3
261 BS EN ISO 9717:2017 Metallic and other inorganic coatings. Phosphate
conversion coating of metals
22
262 ISO/DIS 11124-1 Preparation of steel substrates before application of
paints and related products - Specifications for
metallic blast-cleaning abrasives - Part 1: General
introduction and classification
8
263 ISO/DIS 11124-2 Preparation of steel substrates before application of
paints and related products - Specifications for
metallic blast-cleaning abrasives - Part 2: Chilled-
iron grit
7
264 ISO/DIS 11124-3 Preparation of steel substrates before application of
paints and related products - Specifications for
metallic blast-cleaning abrasives - Part 3: High-
carbon cast-steel shot and grit
8
265 ISO/DIS 11124-4 Preparation of steel substrates before application of
paints and related products - Specifications for
metallic blast-cleaning abrasives - Part 4: Low-
carbon cast-steel shot
7
266 ISO/DIS 11125-1 Preparation of steel substrates before application of
paints and related products - Test methods for
metallic blast-cleaning abrasives - Part 1: Sampling
7
267 ISO/DIS 11125-2 Preparation of steel substrates before application of
paints and related products - Test methods for
metallic blast-cleaning abrasives - Part 2:
Determination of particle size distribution
5
268 ISO/DIS 11125-3 Preparation of steel substrates before application of
paints and related products - Test methods for
metallic blast-cleaning abrasives - Part 3:
Determination of hardness
4
269 ISO/DIS 11125-4 Preparation of steel substrates before application of
paints and related products - Test methods for
4
Page 23
Dịch vụ Cung cấp Thông tin Trọn gói Tháng 12/2017 23/50
TT Số hiệu tiêu chuẩn Tên tiêu chuẩn A4
metallic blast-cleaning abrasives - Part 4:
Determination of apparent density
270 ISO/DIS 11125-5 Preparation of steel substrates before application of
paints and related products - Test methods for
metallic blast-cleaning abrasives - Part 5:
Determination of percentage defective particles and
of microstructure
4
271 ISO/DIS 11125-6 Preparation of steel substrates before application of
paints and related products - Test methods for
metallic blast-cleaning abrasives - Part 6:
Determination of foreign matter
4
272 ISO/DIS 11125-7 Preparation of steel substrates before application of
paints and related products - Test methods for
metallic blast-cleaning abrasives - Part 7:
Determination of moisture
5
273 ISO/DIS 11126-1 Preparation of steel substrates before application of
paints and related products - Specifications for non-
metallic blast-cleaning abrasives - Part 1: General
introduction and classification
6
274 ISO/DIS 11126-3 Preparation of steel substrates before application of
paints and related products - Specifications for non-
metallic blast-cleaning abrasives - Part 3: Copper
refinery slag
5
275 ISO/DIS 11126-4 Preparation of steel substrates before application of
paints and related products - Specifications for non-
metallic blast-cleaning abrasives - Part 4: Coal
furnace slag
4
276 ISO/DIS 11126-5 Preparation of steel substrates before application of
paints and related products - Specifications for non-
metallic blast-cleaning abrasives - Part 5: Nickel
refinery slag
5
277 ISO/DIS 11126-6 Preparation of steel substrates before application of
paints and related products - Specifications for non-
metallic blast-cleaning abrasives - Part 6: Iron
furnace slag
5
278 ISO/DIS 11126-7 Preparation of steel substrates before application of
paints and related products - Specifications for non-
metallic blast-cleaning abrasives - Part 7: Fused
aluminium oxide
6
279 ISO/DIS 11126-8 Preparation of steel substrates before application of
paints and related products - Specifications for non-
metallic blast-cleaning abrasives - Part 8: Olivine
5
Page 24
Dịch vụ Cung cấp Thông tin Trọn gói Tháng 12/2017 24/50
TT Số hiệu tiêu chuẩn Tên tiêu chuẩn A4
Hệ thống và kết cấu cơ khí (Ổ đỡ; Chi tiết lắp xiết; Bánh răng) Trở về đầu trang
280 BS ISO 6526:2017 Plain bearings. Pressed bimetallic half thrust
washers. Features and tolerances
14
281 DIN 3016-1 Fastening clamps - Part 1: With tongue 22
282 ISO/TS 6336-20 Calculation of load capacity of spur and helical
gears - Part 20: Calculation of scuffing load
capacity (also applicable to bevel and hypoid gears)
- Flash temperature method
41
Thiết bị xếp dỡ vật liệu(Xe tải công nghiệp; Máy làm đất; Phụ kiện băng tải; Cần trục)
Trở về đầu trang
283 17/30338554 DC BS EN 1175. Safety of industrial trucks.
Electrical/electronic requirements
96
284 17/30342997 DC BS ISO 20474-15. Earth-moving machinery.
Safety. Part 15. Requirements for compact tool
carriers
19
285 17/30364318 DC BS EN 16307-3. Industrial trucks. Safety
requirements and verification. Part 3.
Supplementary requirements for trucks with
elevating operator position and trucks specifically
designed to travel with elevated loads (additional
requirements to EN 16307-1)
12
286 17/30364322 DC BS EN 16307-2. Industrial trucks. Safety
requirements and verification. Part 2.
Supplementary requirements for self-propelled
variable-reach trucks
16
287 BS ISO 433:2017 Conveyor belts. Marking 12
288 DIN EN 13001-3-5/A1 Cranes - General design - Part 3-5: Limit states and
proof of competence of forged hooks; German and
English version EN 13001-3-5:2016/prA1:2017
34
Luyện kim (Luyện kim bột, kim loại màu) Trở về đầu trang
289 ASTM G188-05(2017)
Replaces: ASTM G188-
05(2011)
Standard Specification for Leak Detector Solutions
Intended for Use on Brasses and Other Copper
Alloys
2
290 DIN EN 485-2/A1 Aluminium and aluminium alloys - Sheet, strip and
plate - Part 2: Mechanical properties; German and
English version EN 485-2:2016/prA1:2017
17
291 JIS G 1323-1:2017
Replaces:JIS G 1323:1989
Method for chemical analysis of chromium metal --
Part 1: Determination of carbon content
3
292 JIS G 1323-3:2017 Method for chemical analysis of chromium metal -- 7
Page 25
Dịch vụ Cung cấp Thông tin Trọn gói Tháng 12/2017 25/50
TT Số hiệu tiêu chuẩn Tên tiêu chuẩn A4
Replaces:JIS G 1323:1989 Part 3: Determination of phosphorus content
293 JIS G 1323-7:2017
Replaces:JIS G 1323:1989
Method for chemical analysis of chromium metal --
Part 7: Determination of various elements -- ICP
atomic emission spectrometric method
7
294 JIS H 1322:2017 Magnesium and magnesium alloys -- Method for
spark discharge atomic emission spectrometric
analysis
15
Luyện kim (Kim loại đen; Sản phẩm sắt và thép) Trở về đầu trang
295 ASTM A1105-17 Standard Specification for Corrugated Steel
Manhole Assemblies
8
296 BS ISO 3108:2017 Steel wire ropes. Test method. Determination of
measured breaking force
12
297 DIN EN 10225-4 Weldable structural steels for fixed offshore
structures - Technical delivery conditions - Part 4:
Cold formed welded hollow sections; German and
English version prEN 10225-4:2017
140
298 DIN EN 14195/A1 Metal framing components for gypsum board
systems - Definitions, requirements and test
methods; German and English version EN
14195:2014/prA1:2017
36
299 JIS G 1258-8:2017 Iron and steel-ICP atomic emission spectrometric
method --- Part 8: Determination of tungsten
content -- Decompostion with phosphoric ang
sulffuric acids
8
300 JIS G 3350:2017
Replaces:JIS G 3350:2009
Light gauge steel sections for general structure 23
Luyện kim (Thử nghiệm kim loại) Trở về đầu trang
301 ASTM A833-17 Replaces:
ASTM A833-08a
Standard Test Method for Indentation Hardness of
Metallic Materials by Comparison Hardness Testers
5
302 ASTM E581-17a Replaces:
ASTM E581-10
Standard Test Methods for Chemical Analysis of
Manganese-Copper Alloys
6
303 JIS B 7724:2017
Replaces:JIS B 7724:1999
Brinell hardness test -- Verification and calibration
of testing machines
20
304 JIS B 7726:2017
Replaces:JIS B 7726:2010
Rockwell hardness test -- Verification and
calibration of testing machines and indenters
29
305 JIS B 7730:2017
Replaces:JIS B 7730:2010
Rockwell hardness test -- Calibration of reference
blocks
21
306 JIS B 7736:2017
Replaces:JIS B 7736:1999
Brinell hardness test -- Calibration of reference
blocks
13
Page 26
Dịch vụ Cung cấp Thông tin Trọn gói Tháng 12/2017 26/50
TT Số hiệu tiêu chuẩn Tên tiêu chuẩn A4
Điện tử Trở về đầu trang
307 IEC 62629-13-1*CEI
62629-13-1
3D display devices - Part 13-1: Visual inspection
methods for stereoscopic displays using glasses -
Ghost image
19
308 IEC/TR 63133*CEI/TR
63133
Semiconductor devices - Scan based ageing level
estimation for semiconductor devices
17
309 KS C IEC TS 60110-2 Power capacitors for induction heating installations
- Part 2: Ageing test, destruction test and
requirements for disconnecting internal fuses
14
Kỹ thuật điện Trở về đầu trang
310 17/30347395 DC BS EN 60034-2-3. Rotating electrical machines.
Part 2-3. Specific test methods for determining
losses and efficiency of converter-fed AC motor
23
311 17/30352657 DC BS IEC 60034-34. Rotating electrical machines.
Part 34. AC adjustable speed rolling mill motors
68
312 17/30358139 DC BS EN 63118. Secondary cells and batteries
containing alkaline or other non-acid electrolytes.
Performance of Secondary lithium batteries for use
in road vehicles not for the propulsion
12
313 BS EN 60034-18-42:2017 Rotating electrical machines. Partial discharge
resistant electrical insulation systems (Type II) used
in rotating electrical machines fed from voltage
converters - Qualification tests
48
314 BS EN 60400:2017 Lampholders for tubular fluorescent lamps and
starterholders
98
315 BS EN 60404-8-6:2017 Magnetic materials. Specifications for individual
materials. Soft magnetic metallic materials
28
316 BS EN 61951-1:2017 Secondary cells and batteries containing alkaline or
other non-acid electrolytes. Secondary sealed cells
and batteries for portable applications. Nickel-
Cadmium
44
317 DIN 89280-1 Glands for electrical cables and wires - Part 1:
Assembly
11
318 DIN 89280-2 Glands for electrical cables and wires - Part 2:
Component parts
8
319 EN ISO/IEC 80079-20-2/AC Explosive atmospheres - Part 20-2: Material
characteristics - Combustible dusts test methods -
Technical Corrigendum 1 (ISO/IEC 80079-20-
2:2016/Cor 1:2017)
5
320 IEC 60730-2-13*CEI Automatic electrical controls - Part 2-13: Particular 20
Page 27
Dịch vụ Cung cấp Thông tin Trọn gói Tháng 12/2017 27/50
TT Số hiệu tiêu chuẩn Tên tiêu chuẩn A4
60730-2-13 requirements for humidity sensing controls
321 IEC 60755*CEI 60755 General safety requirements for residual current
operated protective devices
65
322 IEC 61347-2-7 AMD 1*CEI
61347-2-7 AMD 1
Lamp controlgear - Part 2-7: Particular
requirements for battery supplied electronic
controlgear for emergency lighting (self-contained);
Amendment 1
24
323 IEC 61347-2-7 Edition
3.1*CEI 61347-2-7 Edition
3.1
Lamp controlgear - Part 2-7: Particular
requirements for battery supplied electronic
controlgear for emergency lighting (self-contained)
157
324 IEC 62271-110*CEI 62271-
110
High-voltage switchgear and controlgear - Part 110:
Inductive load switching
60
325 IEC 62554 AMD 1*CEI
62554 AMD 1
Sample preparation for measurement of mercury
level in fluorescent lamps; Amendment 1
5
326 IEC 62554 Edition 1.1*CEI
62554 Edition 1.1
Sample preparation for measurement of mercury
level in fluorescent lamps
86
327 IEC 62677-1*CEI 62677-1 Heat shrinkable low and medium voltage moulded
shapes - Part 1: General requirements
20
328 IEC 62677-2*CEI 62677-2 Heat shrinkable low and medium voltage moulded
shapes - Part 2: Methods of test
54
329 IEC 62838 Corrigendum
1*CEI 62838 Corrigendum 1
LEDsi lamps for general lighting services with
supply voltages not exceeding 50 V a.c. r.m.s. or
120 V ripple free d.c. - Safety specifications;
Corrigendum 1
1
330 IEC/TR 61547-1*CEI/TR
61547-1
Equipment for general lighting purposes - EMC
immunity requirements- Part 1: An objective light
flickermeter and voltage fluctuation immunity test
method
39
331 IEC/TS 60479-2*CEI/TS
60479-2
Effects of current on human beings and livestock -
Part 2: Special aspects
52
332 PD IEC/PAS 63095-1:2017 The Qi wireless power transfer system power class
0 specification. Interface Definitions
162
Thiết bị điện gia dụng Trở về đầu trang
333 IEC/TS 62950*CEI/TS
62950
Household and similar electrical appliances -
Specifying smart capabilities, of appliances and
devices - General aspects
35
334 IEC 60335-2-43*CEI
60335-2-43
Household and similar electrical appliances - Safety
- Part 2-43: Particular requirements for clothes
dryers and towel rails
Page 28
Dịch vụ Cung cấp Thông tin Trọn gói Tháng 12/2017 28/50
TT Số hiệu tiêu chuẩn Tên tiêu chuẩn A4
335 IEC 60335-2-81 AMD
1*CEI 60335-2-81 AMD 1
Household and similar electrical appliances - Safety
- Part 2-81: Particular requirements for foot
warmers and heating mats; Amendment 1
2
336 IEC 60335-2-82*CEI
60335-2-82
Household and similar electrical appliances - Safety
- Part 2-82: Particular requirements for amusement
machines and personal service machines
20
337 IEC 60335-2-95 AMD
2*CEI 60335-2-95 AMD 2
Household and similar electrical appliances - Safety
- Part 2-95: Particular requirements for drives for
vertically moving garage doors for residential use;
Amendment 2
2
338 IEC 60335-2-12 AMD
2*CEI 60335-2-12 AMD 2
Household and similar electrical appliances - Safety
- Part 2-12: Particular requirements for warming
plates and similar appliances; Amendment 2
5
339 IEC 60335-2-81 Edition
3.1*CEI 60335-2-81 Edition
3.1
Household and similar electrical appliances - Safety
- Part 2-81: Particular requirements for foot
warmers and heating mats
48
340 IEC 60335-2-95 Edition
3.2*CEI 60335-2-95 Edition
3.2
Household and similar electrical appliances - Safety
- Part 2-95: Particular requirements for drives for
vertically moving garage doors for residential use
52
341 IEC 60335-2-12 Edition
5.2*CEI 60335-2-12 Edition
5.2
Household and similar electrical appliances - Safety
- Part 2-12: Particular requirements for warming
plates and similar appliances
31
Thiết bị Quang học Trở về đầu trang
342 17/30333665 DC BS ISO 9211-8. Optics and photonics. Optical
coatings. Part 8. Coatings used for laser optics
12
Công nghệ thông tin và ứng dụng Trở về đầu trang
343 17/30338469 DC BS ISO/IEC 20027. Information technology. Best
practices for slap ten print fingerprint capture
24
344 17/30340293 DC BS ISO/IEC 23005-3. Information technology.
Media context and control. Part 3. Sensory
information. Part 3: Sensory information
118
345 17/30346460 DC BS ISO/IEC 23008-9. Information technology.
High efficiency coding and media delivery in
heterogeneous environments. Part 9. 3D Audio
conformance testing
106
346 17/30346469 DC BS ISO/IEC 23003-4 AMD3. Information
technology. MPEG audio technologies. Part 4.
Dynamic Range Control
43
347 17/30347952 DC BS ISO/IEC 29138-1. Information technology. User
interface accessibility. Part 1. User accessibility
126
Page 29
Dịch vụ Cung cấp Thông tin Trọn gói Tháng 12/2017 29/50
TT Số hiệu tiêu chuẩn Tên tiêu chuẩn A4
needs
348 17/30351036 DC BS ISO/IEC 26553. Information technology.
Software and systems engineering. Tools and
methods for product line realization
74
349 17/30351039 DC BS ISO/IEC 26556. Information technology.
Software and systems engineering. Tools and
methods for product line organizational
management
74
350 17/30351404 DC BS ISO/IEC 26554. Information technology.
Software and systems engineering. Tools and
methods for product line testing
66
351 17/30357626 DC BS ISO/IEC 23001-11 AMD3. Information
technology. MPEG systems technologies. Part 11.
Energy-efficient media consumption (green
metadata)
25
352 17/30357635 DC BS ISO/IEC 23001-13. Information technology.
MPEG systems technologies. Part 13. Media
orchestration
82
353 17/30359748 DC BS ISO/IEC 23005-4. Information technology.
Media context and control. Part 4. Virtual world
object characteristics
282
354 17/30359751 DC BS ISO/IEC 23005-2. Information technology.
Media context and control. Part 2. Control
information
306
355 17/30361104 DC BS ISO/IEC 23009-4. Information technology.
Dynamic adaptive streaming over HTTP (DASH).
Part 4. Segment encryption and authentication
37
356 17/30366292 DC BS ISO/IEC 21000-8 AMD4. Information
technology. Multimedia framework (MPEG 21).
Part 8. Reference software
8
357 17/30366594 DC BS ISO/IEC 13251. Information technology.
Collection of graphical symbols for office
equipment
113
358 BS ISO/IEC 27050-3:2017 Information technology. Security techniques.
Electronic discovery. Code of practice for electronic
discovery
36
359 BS ISO/IEC 30140-2:2017 Information technology. Underwater acoustic
sensor network (UWASN). Reference architecture
40
360 ISO 11615 Health informatics - Identification of medicinal
products - Data elements and structures for the
79
Page 30
Dịch vụ Cung cấp Thông tin Trọn gói Tháng 12/2017 30/50
TT Số hiệu tiêu chuẩn Tên tiêu chuẩn A4
unique identification and exchange of regulated
medicinal product information
361 ISO 11616 Health informatics - Identification of medicinal
products - Data elements and structures for unique
identification and exchange of regulated
pharmaceutical product information
33
362 ISO 25110 Electronic fee collection - Interface definition for
on-board account using integrated circuit card
(ICC)
34
363 ISO/IEC 14492 DAM 4 Information technology - Lossy/lossless coding of
bi-level images; Amendment 4
6
364 ISO/IEC 18047-6 Information technology - Radio frequency
identification device conformance test methods -
Part 6: Test methods for air interface
communications at 860 MHz to 960 MHz
82
365 ISO/IEC 18477-4 Information technology - Scalable compression and
coding of continuous-tone still images - Part 4:
Conformance testing
31
366 ISO/IEC 19592-2 Information technology - Security techniques -
Secret sharing - Part 2: Fundamental mechanisms
22
367 ISO/IEC 19987 Information technology - EPC Information Services
(EPCIS) Standard
131
368 ISO/IEC 19988 Information technology - Core Business Vocabulary
Standard
59
369 ISO/IEC 20382-1 Information technology - User interfaces - Face-to-
face speech translation - Part 1: User interface
15
370 ISO/IEC 20382-2 Information technology - User interface - Face-to-
face speech translation - Part 2: System architecture
and functional components
19
371 ISO/IEC 21000-8 DAM 4 Information technology - Multimedia framework
(MPEG-21) - Part 8: Reference software -
Amendment 4: Media value chain ontology
extensions on time-segments and multi-track audio
3
372 ISO/IEC 23001-11 DAM 3 Information technology - MPEG systems
technologies - Part 11: Energy-efficient media
consumption (green metadata); Amendment 3
18
373 ISO/IEC 23001-11 FDAM 2 Information technology - MPEG systems
technologies - Part 11: Energy-efficient media
consumption (green metadata) - Amendment 2:
Conformance and reference software
4
Page 31
Dịch vụ Cung cấp Thông tin Trọn gói Tháng 12/2017 31/50
TT Số hiệu tiêu chuẩn Tên tiêu chuẩn A4
374 ISO/IEC 23003-4 AMD 2 Information technology - MPEG audio technologies
- Part 4: Dynamic Range Control - Amendment 2:
Reference software
3
375 ISO/IEC 23003-4 DAM 3 Information technology - MPEG audio technologies
- Part 4: Dynamic Range Control - Amendment 3:
Conformance
35
376 ISO/IEC 23009-2 Information technology - Dynamic adaptive
streaming over HTTP (DASH) - Part 2:
Conformance and reference software
70
377 ISO/IEC 27007 Information technology - Security techniques -
Guidelines for information security management
systems auditing
41
378 ISO/IEC 27034-5 Information technology - Security techniques -
Application security - Part 5: Protocols and
application security controls data structure
33
379 ISO/IEC 30134-4 Information technology - Data centres - Key
performance indicators - Part 4: IT Equipment
Energy Efficiency for servers (ITEEsv)
12
380 ISO/IEC 30134-5 Information technology - Data centres - Key
performance indicators - Part 5: IT Equipment
Utilization for servers (ITEUsv)
7
381 ISO/IEC 40180 Information technology - Quality for learning,
education and training - Fundamentals and
reference framework
67
382 ISO/IEC 7816-4 DAM 1 Identification cards - Integrated circuit cards - Part
4: Organization, security and commands for
interchange - Amendment 1: Record handling
10
383 ISO/IEC 7816-4 DAM 2 Identification cards - Integrated circuit cards - Part
4: Organization, security and commands for
interchange - Amendment 2: Waiting time
management
5
384 ISO/IEC DIS 15963-1 Information technology - Radio frequency
identification for item management - Unique
identification for RF tags - Part 1: Unique
identification for RF tags numbering systems
19
385 ISO/IEC DIS 18328-4 Identification cards - ICC-managed devices - Part 4:
Test methods for logical characteristics
29
386 ISO/IEC DIS 20027 Information technology - Best practices for slap ten
print fingerprint capture
17
387 ISO/IEC DIS 23001-13 Information technology - MPEG systems 74
Page 32
Dịch vụ Cung cấp Thông tin Trọn gói Tháng 12/2017 32/50
TT Số hiệu tiêu chuẩn Tên tiêu chuẩn A4
technologies - Part 13: Media orchestration
388 ISO/IEC DIS 23005-2 Information technology - Media context and control
- Part 2: Control information
294
389 ISO/IEC DIS 23005-3 Information technology - Media context and control
- Part 3: Sensory information
110
390 ISO/IEC DIS 23005-4 Information technology - Media context and control
- Part 4: Virtual world object characteristics
270
391 ISO/IEC DIS 23005-5 Information technology - Media context and control
- Part 5: Data formats for interaction devices
328
392 ISO/IEC DIS 23005-6 Information technology - Media context and control
- Part 6: Common types and tools
118
393 ISO/IEC DIS 23008-9 Information technology - High efficiency coding
and media delivery in heterogeneous environments
- Part 9: 3D Audio conformance testing
94
394 ISO/IEC DIS 26553 Information technology - Software and systems
engineering - Tools and methods for product line
realization
66
395 ISO/IEC DIS 26554 Information technology - Software and systems
engineering - Tools and methods for product line
testing
67
396 ISO/IEC DIS 26556 Information technology - Software and systems
engineering - Tools and methods for product line
organizational management
66
397 ISO/IEC DIS 29167-21 Information technology - Automatic identification
and data capture techniques - Part 21: Crypto suite
SIMON security services for air interface
communications
58
398 ISO/IEC DIS 29167-22 Information technology - Automatic identification
and data capture techniques - Part 22: Crypto suite
SPECK security services for air interface
communications
48
399 ISO/IEC DIS 9798-3 Information technology - Security techniques -
Entity authentication - Part 3: Mechanisms using
digital signature techniques
24
400 ISO/IEC FDIS 13818-1 Information technology - Generic coding of moving
pictures and associated audio information - Part 1:
Systems
274
401 ISO/IEC FDIS 15938-14 Information technology - Multimedia content
description interface - Part 14: Reference software,
conformance and usage guidelines for compact
14
Page 33
Dịch vụ Cung cấp Thông tin Trọn gói Tháng 12/2017 33/50
TT Số hiệu tiêu chuẩn Tên tiêu chuẩn A4
descriptors for visual search
402 ISO/IEC FDIS 19286 Identification cards - Integrated circuit cards -
Privacy-enhancing protocols and services
76
403 ISO/IEC FDIS 23000-16 Information technology - Multimedia application
format (MPEG-A) - Part 16: Publish/Subscribe
Application Format
27
404 ISO/IEC FDIS 23000-19 Information technology - Multimedia application
format (MPEG-A) - Part 19: Common media
application format (CMAF) for segmented media
106
405 ISO/IEC TR 15446 Information technology - Security techniques -
Guidance for the production of protection profiles
and security targets
79
406 ISO/IEC TR 22560 Information technology - Sensor networks -
Guidelines for design in the aeronautics industry:
Active Air-flow Control
45
407 ISO/IEC TR 23002-6 Information technology - MPEG video technologies
- Part 6: Tools for reconfigurable media coding
implementations
66
408 ISO/IEC TR 29170-1 Information technology - Advanced image coding
and evaluation - Part 1: Guidelines for image
coding system evaluation
35
409 ISO/IEC TS 19249 Information technology - Security techniques -
Catalogue of architectural and design principles for
secure products, systems and applications
26
410 ISO/IEC/IEEE 8802-22
AMD 1
Information technology - Telecommunications and
information exchange between systems - Local and
metropolitan area networks - Specific requirements
- Part 22: Cognitive Wireless RAN Medium Access
Control (MAC) and Physical Layer (PHY)
specifications: Policies and procedures for operation
in the TV Band - Amendment 1: Management and
control plane interfaces and procedures and
enhancement to the management information base
(MIB)
507
411 ISO/IEC/IEEE 8802-A
FDAM 1
Information technology - Telecommunications and
information exchange between systems - Local and
metropolitan area networks - Overview and
Architecture - Amendment 1: Allocation of
Uniform Resource Name (URN) values in IEEE
802® standards
15
412 ISO/IEC/IEEE FDIS 8802- Information technology - Telecommunications and 50
Page 34
Dịch vụ Cung cấp Thông tin Trọn gói Tháng 12/2017 34/50
TT Số hiệu tiêu chuẩn Tên tiêu chuẩn A4
1AC information exchange between systems - Local and
metropolitan area networks - Part 1AC: Media
access control (MAC) service definition
413 ISO/IEC/IEEE FDIS 8802-
21
Information technology - Telecommunications and
information exchange between systems - Local and
metropolitan area networks - Specific requirements
- Part 21: Media independent services framework
312
414 ISO/IEC/IEEE FDIS 8802-
21-1
Information technology - Telecommunications and
information exchange between systems - Local and
metropolitan area networks - Part 21-1: Media
independent services
209
415 PD CEN/TR 16931-6:2017 Electronic invoicing. Result of the test of EN
16931-1 with respect to its practical application for
an end user
88
416 PD CEN/TS 16931-3-2:2017 Electronic invoicing. Syntax binding for ISO/IEC
19845 (UBL 2.1) invoice and credit note
242
417 PD CEN/TS 16931-3-4:2017 Electronic invoicing. Syntax binding for
UN/EDIFACT INVOIC D16B
224
Viễn thông. Kỹ thuật âm thanh và hình ảnh Trở về đầu trang
418 BS EN 62056-7-3:2017 Electricity metering data exchange. The
DLMS/COSEM suite. Wired and wireless M-Bus
communication profiles for local and
neighbourhood networks
42
419 DIN EN 16931-1 Electronic invoicing - Part 1: Semantic data model
of the core elements of an electronic invoice;
German version EN 16931-1:2017
159
420 IEC 60793-1-47*CEI
60793-1-47
Optical fibres - Part 1-47: Measurement methods
and test procedures - Macrobending loss
71
421 IEC 60794-1-22*CEI
60794-1-22
Optical fibre cables - Part 1-22: Generic
specification - Basic optical cable test procedures -
Environmental test methods
37
422 IEC 61097-3*CEI 61097-3 Global maritime distress and safety system
(GMDSS) - Part 3: Digital selective calling (DSC)
equipment - Operational and performance
requirements, methods of testing and required
testing results
261
423 IEC/IEEE 62704-
1*CEI/IEEE 62704-1
Determining the peak spatial-average specific
absorption rate (SAR) in the human body from
wireless communications devices, 30 MHz to 6
GHz - Part 1: General requirements for using the
finite-difference time-domain (FDTD) method for
81
Page 35
Dịch vụ Cung cấp Thông tin Trọn gói Tháng 12/2017 35/50
TT Số hiệu tiêu chuẩn Tên tiêu chuẩn A4
SAR calculations
424 IEC/IEEE 62704-
3*CEI/IEEE 62704-3
Determining the peak spatial-average specific
absorption rate (SAR) in the human body from
wireless communications devices, 30 MHz to 6
GHz - Part 3: Specific requirements for using the
finite difference time domain (FDTD) method for
SAR calculations of mobile phones
72
425 IEC/TR 61850-90-
10*CEI/TR 61850-90-10
Communication networks and systems for power
utility automation - Part 90-10: Models for
scheduling
42
Vật liệu xây dựng và Xây dựng nhà Trở về đầu trang
426 17/30354435 DC BS 8415. Monuments within burial grounds and
memorial sites. Specification
40
427 17/30363984 DC BS EN 16140. Natural stone test methods.
Determination of sensitivity to changes in
appearance produced by thermal cycles
16
428 17/30364303 DC BS EN 16758 AMD1. Curtain walling.
Determination of the strength of sheared
connections. Test method and requirements
7
429 DIN EN 1527 Building hardware - Hardware for sliding doors and
folding doors - Requirements and test methods;
German and English version prEN 1527:2017
44
430 DIN EN 16475-3/A1 Chimneys - Accessories - Part 3: Draught
regulators, standstill opening devices and combined
secondary air devices - Requirements and test
methods; German and English version EN 16475-
3:2016/prA1:2017
431 JIS A 4009:2017 Components of air duct 46
432 PD CEN/TR 17113:2017 Construction products. Assessment of release of
dangerous substances. Radiation from construction
products. Dose assessment of emitted gamma
radiation
50
433 DIN EN 13639 Determination of total organic carbon in limestone;
German version EN 13639:2017
27
434 DIN EN 15232-1 Energy Performance of Buildings - Part 1: Impact
of Building Automation, Controls and Building
Management - Modules M10-4, 5, 6, 7, 8, 9, 10;
German version EN 15232-1:2017
109
435 DIN EN 14695 Flexible sheets for waterproofing - Reinforced
bitumen sheets for waterproofing of concrete bridge
decks and other trafficked areas of concrete -
63
Page 36
Dịch vụ Cung cấp Thông tin Trọn gói Tháng 12/2017 36/50
TT Số hiệu tiêu chuẩn Tên tiêu chuẩn A4
Definitions and characteristics; German and English
version prEN 14695:2017
436 DIN EN 17190 Flexible sheets for waterproofing - Solar
Reflectance Index; German and English version
prEN 17190:2017
17
437 DIN EN 12405-1 Gas meters - Conversion devices - Part 1: Volume
conversion; German and English version prEN
12405-1:2017
238
438 IEC 60335-2-103 AMD
1*CEI 60335-2-103 AMD 1
Household and similar electrical appliances - Safety
- Part 2-103: Particular requirements for drives for
gates, doors and windows; Amendment 1
3
439 DIN EN 12604 Industrial, commercial and garage doors and gates -
Mechanical aspects - Requirements and test
methods; German version EN 12604:2017
19
440 JIS A 1146:2017 Method of test for alkali-silica reactivity of
aggregates by motar-bar method
8
441 DIN EN 772-22 Methods of test for masonry units - Part 22:
Determination of freeze/thaw resistance of clay
masonry units; German and English version prEN
772-22:2017
37
442 DIN 43863-8 Smart Meter Gateway - Class definition for TR
03109 according to COSEM, with CD-ROM
125
443 DIN EN 13495 Thermal insulation products for building
applications - Determination of the pull-off
resistance of external thermal insulation composite
systems (ETICS)(foam block test); German and
English version prEN 13495:2017
38
444 DIN EN 1504-10 Products and systems for the protection and repair
of concrete structures - Definitions, requirements,
quality control and evaluation of conformity - Part
10: Site application of products and systems and
quality control of the works; German version EN
1504-10:2017
89
445 IEC 60335-2-103 Edition
3.1*CEI 60335-2-103
Edition 3.1
Household and similar electrical appliances - Safety
- Part 2-103: Particular requirements for drives for
gates, doors and windows
135
446 ASTM E2128-17 Replaces:
ASTM E2128-12
Standard Guide for Evaluating Water Leakage of
Building Walls
38
Xây dựng nhà (Âm học trong xây dựng) Trở về đầu trang
447 ISO/DIS 11654 Acoustics - Sound absorbers - Rating of sound
absorption coefficients
8
Page 37
Dịch vụ Cung cấp Thông tin Trọn gói Tháng 12/2017 37/50
TT Số hiệu tiêu chuẩn Tên tiêu chuẩn A4
Xây dựng dân dụng ( Kỹ thuật làm đường; Hệ thống nước cống bên ngoài)
Trở về đầu trang
448 17/30363981 DC BS EN 12697-2 AMD1. Bituminous mixtures. Test
methods. Part 2. Determination of particle size
distribution
6
449 ASTM A1107/A1107M-17 Standard Specification for Resilient Connectors
Between Reinforced Concrete Manhole Structures
and Corrugated Steel Drainage Pipes
3
450 ASTM D713-12(2017)
Replaces: ASTM D713-
90(2010)
Standard Practice for Conducting Road Service
Tests on Fluid Traffic Marking Materials
4
451 DIN EN 12697-2/A1 Bituminous mixtures - Test methods - Part 2:
Determination of particle size distribution; German
and English version EN 12697-2:2015/prA1:2017
10
452 DIN EN 12697-31 Bituminous mixtures - Test methods - Part 31:
Specimen preparation by gyratory compactor;
German and English version prEN 12697-31:2017
69
453 DIN EN 12697-32 Bituminous mixtures - Test methods - Part 32:
Laboratory compaction of bituminous mixtures by
vibratory compactor; German and English version
prEN 12697-32:2017
26
454 DIN EN 12767 Passive safety of support structures for road
equipment - Requirements and test methods;
German and English version prEN 12767:2017
141
455 DIN EN 16933-2 Drain and sewer systems outside buildings - Design
- Part 2: Hydraulic design; German version EN
16933-2:2017
41
Công nghệ chế biến gỗ Trở về đầu trang
456 DIN EN 13227 Wood flooring - Solid lamparquet products;
German version EN 13227:2017
31
457 DIN EN 13489 Wood-flooring and parquet - Multi-layer parquet
elements; German version EN 13489:2017
29
Sơn và chất màu (Sơn và vecni; Thành phần sơn) Trở về đầu trang
458 17/30364312 DC BS EN 927-10. Paints and varnishes. Coating
materials and coating systems for exterior wood.
Part 10. Resistance to blocking of paints and
varnishes on wood
24
459 ASTM D3274 -09(2017)
Replaces: ASTM D3274-
09e1
Standard Test Method for Evaluating Degree of
Surface Disfigurement of Paint Films by Fungal or
Algal Growth, or Soil and Dirt Accumulation
8
Page 38
Dịch vụ Cung cấp Thông tin Trọn gói Tháng 12/2017 38/50
TT Số hiệu tiêu chuẩn Tên tiêu chuẩn A4
460 ASTM D3723-05(2017)
Replaces: ASTM D3723-
05e1
Standard Test Method for Pigment Content of
Water-Emulsion Paints by Low-Temperature
Ashing
2
461 ASTM D4138-07a(2017)
Replaces: ASTM D4138-07a
Standard Practices for Measurement of Dry Film
Thickness of Protective Coating Systems by
Destructive, Cross-Sectioning Means
5
462 ASTM D4610-98(2017)
Replaces: ASTM D4610-
98(2013)
Standard Guide for Determining the Presence of
and Removing Microbial (Fungal or Algal) Growth
on Paint and Related Coatings
2
463 ASTM D714-02(2017)
Replaces: ASTM D714-02e1
Standard Test Method for Evaluating Degree of
Blistering of Paints
6
464 DIN 55912-2 Pigments - Titanium dioxide pigments - Part 2:
Analytical methods
24
465 JIS K 5601-4-1:2012
Replaces:JIS K 5601-4-
1:2003
Testing methods for paint components - Part 4:
Analysis for components emitted from film -
Section 1: Determination of Formaldehyde emission
15
Công nghệ da Trở về đầu trang
466 17/30360626 DC BS EN ISO 17226-1. Leather. Chemical
determination of formaldehyde content. Part 1.
Method using high performance liquid
chromatography
13
467 17/30360629 DC BS EN ISO 17226-2. Leather. Chemical
determination of formaldehyde content. Part 2.
Method using colorimetric analysis
14
468 ISO/FDIS 17551 Leather - Pickled sheep pelts - Guidelines for
grading on the basis of defect and size
3
Công nghệ dệt may Trở về đầu trang
469 17/30333776 DC BS ISO 20615. Fibre ropes. Electrostatic surface
potential measuring method
23
470 17/30334458 DC BS ISO 20920. Textiles. Man-made fibres.
Determination of dye-uptake of cationic dyeable
modified polyester fibres
13
471 DIN 53894-2 Testing of textiles - Determination of dimensional
change of textile fabrics - Part 2: Steaming on
ironing machines
12
472 DIN 54015 Testing of colour fastness of textiles -
Determination of colour fastness of dyeings and
prints to washing in presence of peroxide
7
473 DIN 54016 Testing of colour fastness of textiles - 7
Page 39
Dịch vụ Cung cấp Thông tin Trọn gói Tháng 12/2017 39/50
TT Số hiệu tiêu chuẩn Tên tiêu chuẩn A4
Determination of colour fastness of dyeings and
prints to washing in presence of hypochlorite
474 DIN 60009 Geosynthetics - Determination and testing of the
interaction coefficient to the soil using pullout test
15
475 KS K 0010 Glossary of terms used in spinning machinery 23
476 KS K 0013 Glossary of terms used in spinning 12
477 KS K 0014 Nomenclature of knitting machine 11
May mặc Trở về đầu trang
478 DIN EN 13402-3 Size designation of clothes - Part 3: Size labelling
based on body measurements and intervals; German
version EN 13402-3:2017
42
Thủy tinh và gốm (Gốm cao cấp- Thủy tinh – Vật liệu chịu lửa) Trở về đầu trang
479 17/30301540 DC BS ISO 19629. Fine Ceramics (advanced ceramics,
advanced technical ceramics). Thermophysical
properties of ceramic composites. Determination of
unidimensional thermal diffusivity by flash method
17
480 17/30336176 DC BS ISO 21066. Fine ceramics (advanced ceramics,
advanced technical ceramics). Qualitative and
semiquantitative assessment of the photocatalytic
activities of surfaces by the reduction of resazurin
in a deposited ink film
24
481 17/30365055 DC BS EN 12150-2. Glass in building. Thermally
toughened soda lime silicate safety glass. Part 2.
Product standard
42
482 17/30365059 DC BS EN 14449. Glass in building. Laminated glass
and laminated safety glass. Product standard
58
483 17/30365062 DC BS EN 14179-2. Glass in building. Heat soaked
thermally toughened soda lime silicate safety glass.
Part 2. Product standard
42
484 ASTM C16-03(2012)e2
Replaces: ASTM C16-
03(2008)e1
Standard Test Method for Load Testing Refractory
Shapes at High Temperatures
5
485 ASTM C1720 -17 Replaces:
ASTM C1720-11
Standard Test Method for Determining Liquidus
Temperature of Waste Glasses and Simulated
Waste Glasses
20
486 BS ISO 18543:2017 Glass in building. Electrochromic glazings.
Accelerated ageing test and requirements
22
487 DIN 54387-4 Testing of ceramic raw and basic materials -
Chemical analysis of boron carbide, boron nitride,
28
Page 40
Dịch vụ Cung cấp Thông tin Trọn gói Tháng 12/2017 40/50
TT Số hiệu tiêu chuẩn Tên tiêu chuẩn A4
metal borides and elemental boron - Part 4:
Determination of metallic main components and
trace impurities
488 DIN EN 12150-2 Glass in building - Thermally toughened soda lime
silicate safety glass - Part 2: Product standard;
German and English version prEN 12150-2:2017
84
489 DIN EN 14179-2 Glass in building - Heat soaked thermally
toughened soda lime silicate safety glass - Part 2:
Product standard; German and English version
prEN 14179-2:2017
86
490 DIN EN 14449 Glass in building - Laminated glass and laminated
safety glass - Product standard; German and English
version prEN 14449:2017
112
491 DIN EN 16612 Glass in building - Determination of the lateral load
resistance of glass panes by calculation; German
and English version prEN 16612:2017
113
492 ISO 26602 Fine ceramics (advanced ceramics, advanced
technical ceramics) - Silicon nitride materials for
rolling bearing balls and rollers
7
493 JIS R 3223:2017 Tempered Fire Resistance Glass 15
Công nghệ chăm sóc sức khỏe (Thiết bị y tế) Trở về đầu trang
494 17/30350521 DC BS EN ISO 7886-4. Sterile hypodermic syringes for
single use. Part 4. Syringes with re-use prevention
feature
20
495 BS ISO 7176-2:2017 Wheelchairs. Determination of dynamic stability of
electrically powered wheelchairs
32
496 DIN EN 81-40 Safety rules for the construction and installation of
lifts - Special lifts for the transport of persons and
goods - Part 40: Stairlifts and inclined lifting
platforms intended for persons with impaired
mobility; German and English version prEN 81-
40:2017
161
497 IEC/DIS 80601-2-77 Medical electrical equipment - Part 2-77: Particular
requirements for the basic safety and essential
performance of medical robots for surgery
34
498 IEC/DIS 80601-2-78 Medical electrical equipment - Part 2-78: Particular
requirements for the basic safety and essential
performance of medical robots for rehabilitation,
compensation or alleviation of disease, injury or
disability
34
Page 41
Dịch vụ Cung cấp Thông tin Trọn gói Tháng 12/2017 41/50
TT Số hiệu tiêu chuẩn Tên tiêu chuẩn A4
499 ISO/FDIS 11195 Gas mixers for medical use - Stand-alone gas
mixers
19
500 ISO/FDIS 11249 Copper-bearing intrauterine contraceptive devices -
Guidance on the design, execution, analysis and
interpretation of clinical studies
23
501 KS C IEC 60601-2-47 Medical electrical equipment-Part 2-
47:Particular requirements for the safety,
including essential performance, of ambulatory
electrocardiographic systems
65
502 KS C IEC 60601-2-6 Medical electrical epuipment-Part 2:Particular
requirements for the safety of microwave therapy
equipment
19
503 KS C IEC 61223-3-2 Evaluation and routine testing in medical imaging
departments-Part 3-2:Acceptance tests-
Imaging performance of mammographic X-ray
equipment
56
504 KS P 1907-1 Determination method of drug adsorption in
infusion tube ─ Part1: Nitroglycerin, Cyclosporin
A, Tacrolimus
8
505 KS P 1927 Herbal decoction apparatus 12
506 KS P 1928 Korean Medicine ─ General requirements of
moxibustion devices
11
Công nghệ chăm sóc sức khỏe (Thiết bị nha khoa) Trở về đầu trang
507 KS P ISO 13116 Dentistry ─ Test Method for Determining Radio-
Opacity of Materials
8
508 KS P ISO 14457 Dentistry ─ Handpieces and motors 26
509 KS P ISO 16443 Dentistry ─ Vocabulary for dental implants systems
and related procedure
17
510 KS P ISO 16635-2 Dentistry ─ Dental rubber dam instruments ─ Part
2: Clamp forceps
8
511 KS P ISO 16954 Dentistry ─ Test methods for dental unit waterline
biofilm treatment
18
512 KS P ISO 17304 Dentistry ─ Polymerization shrinkage: Method for
determination of polymerization shrinkage of
polymer-based restorative materials
15
513 KS P ISO 17730 Dentistry ─ Fluoride varnishes 10
514 KS P ISO 9173-3 Dentistry ─ Extraction forceps - Part 3: Design 12
Công nghệ chăm sóc sức khỏe (Tiệt khuẩn và khử trùng; Y học thí nghiệm)
Page 42
Dịch vụ Cung cấp Thông tin Trọn gói Tháng 12/2017 42/50
TT Số hiệu tiêu chuẩn Tên tiêu chuẩn A4
Trở về đầu trang
515 DIN EN 17180 Sterilizers for medical purposes - Low temperature
vaporized hydrogen peroxide sterilizers -
Requirements and testing; German and English
version prEN 17180:2017
178
516 ISO 17664 Processing of health care products - Information to
be provided by the medical device manufacturer for
the processing of medical devices
24
Thiết bị gia dụng – Giải trí Trở về đầu trang
517 17/30363953 DC BS EN 416. Gas-fired overhead radiant tube heaters
and radiant tube heater systems for non-domestic
use. Safety and energy efficiency
172
518 DIN EN 17072 Child care articles - Bath tubs, stands and non-
standalone bathing aids - Safety requirements and
test methods; German and English version prEN
17072:2017
95
519 DIN EN 1130 Children's Furniture - Cribs and cradles - Safety
requirements and test methods; German and English
version prEN 1130:2017
87
520 DIN EN 17191 Children's Furniture - Seating for children - Safety
requirements and test methods; German and English
version prEN 17191:2017
73
521 DIN EN 16282-1 Equipment for commercial kitchens - Components
for ventilation in commercial kitchens - Part 1:
General requirements including calculation method;
German version EN 16282-1:2017
36
522 DIN EN 16282-5 Equipment for commercial kitchens - Components
for ventilation in commercial kitchens - Part 5: Air
duct; Design and dimensioning; German version
EN 16282-5:2017
17
523 DIN EN 16282-7 Equipment for commercial kitchens - Components
for ventilation in commercial kitchens - Part 7:
Installation and use of fixed fire suppression
systems; German version EN 16282-7:2017
12
524 DIN EN 16282-8 Equipment for commercial kitchens - Components
for ventilation in commercial kitchens - Part 8:
Installations for treatment of aerosol; Requirements
and testing; German version EN 16282-8:2017
28
525 DIN EN 17175 Gas-fired overhead radiant strip heaters and multi-
burner continuous radiant tube heater systems for
non-domestic use - Safety and energy efficiency;
346
Page 43
Dịch vụ Cung cấp Thông tin Trọn gói Tháng 12/2017 43/50
TT Số hiệu tiêu chuẩn Tên tiêu chuẩn A4
German and English version prEN 17175:2017
526 DIN EN 416 Gas-fired overhead radiant tube heaters and radiant
tube heater systems for non-domestic use - Safety
and energy efficiency; German and English version
prEN 416:2017
346
527 DIN EN 13329 Laminate floor coverings - Elements with a surface
layer based on aminoplastic thermosetting resins -
Specifications, requirements and test methods;
German version EN 13329:2016+A1:2017
48
528 DIN EN 16121 Non-domestic storage furniture - Requirements for
safety, strength, durability and stability; German
version EN 16121:2013+A1:2017
25
529 DIN EN 13845 Resilient floor coverings - Polyvinyl chloride floor
coverings with particle based enhanced slip
resistance - Specification; German version EN
13845:2017
21
530 17/30363915 DC BS EN 131-6. Ladders. Part 6. Telescopic ladders 23
531 IEC 60335-2-52 AMD
2*CEI 60335-2-52 AMD 2
Household and similar electrical appliances - Safety
- Part 2-52: Particular requirements for oral hygiene
appliances; Amendment 2
4
532 DIN EN 131-4 Ladders - Part 4: Single or multiple hinge-joint
ladders; German and English version prEN 131-
4:2017
38
533 DIN EN 1176-1 Playground equipment and surfacing - Part 1:
General safety requirements and test methods;
German version EN 1176-1:2017
119
534 DIN EN 1176-2 Playground equipment and surfacing - Part 2:
Additional specific safety requirements and test
methods for swings; German version EN 1176-
2:2017
27
535 BS EN 1176-3:2017 Playground equipment and surfacing. Additional
specific safety requirements and test methods for
slides
22
536 DIN EN 1176-3 Playground equipment and surfacing - Part 3:
Additional specific safety requirements and test
methods for slides; German version EN 1176-
3:2017
24
537 BS EN 1176-4:2017 Playground equipment and surfacing. Additional
specific safety requirements and test methods for
cableways
14
538 DIN EN 1176-4 Playground equipment and surfacing - Part 4: 18
Page 44
Dịch vụ Cung cấp Thông tin Trọn gói Tháng 12/2017 44/50
TT Số hiệu tiêu chuẩn Tên tiêu chuẩn A4
Additional specific safety requirements and test
methods for cableways; German version EN 1176-
4:2017
539 DIN EN 1176-6 Playground equipment and surfacing - Part 6:
Additional specific safety requirements and test
methods for rocking equipment; German version
EN 1176-6:2017
22
540 DIN EN 71-7 Safety of toys - Part 7: Finger paints - Requirements
and test methods; German version EN 71-
7:2014+A1:2017
69
541 IEC 60335-2-52 Edition
3.2*CEI 60335-2-52 Edition
3.2
Household and similar electrical appliances - Safety
- Part 2-52: Particular requirements for oral hygiene
appliances
25
An toàn (Phòng cháy; Phòng nổ; Thiết bị bảo vệ) Trở về đầu trang
542 17/30366740 DC BS EN ISO 374-1 AMD1. Protective gloves against
dangerous chemicals and micro-organisms. Part 1.
Terminology and performance requirements for
chemical risks
9
543 DIN 4102-17 Fire behaviour of building materials and building
components - Part 17: Melting point of mineral
wool insulating materials - Terms and definitions,
requirements and test
8
544 DIN EN 1047-2 Secure storage units - Classification and methods of
test for resistance to fire - Part 2: Data rooms and
data container; German and English version prEN
1047-2:2017
75
545 DIN EN 1127-1 Explosive atmospheres - Explosion prevention and
protection - Part 1: Basic concepts and
methodology; German and English version prEN
1127-1:2017
99
546 DIN EN 16755 Durability of reaction to fire performance - Classes
of fire-retardant treated wood products in interior
and exterior end use applications; German version
EN 16755:2017
32
547 ISO/FDIS 11613 Protective clothing for firefighter's who are engaged
in support activities associated with structural fire
fighting - Laboratory test methods and performance
30
Ecgônômi (Công thái học) Trở về đầu trang
548 BS EN ISO 9241-125:2017 Ergonomics of human-system interaction. Guidance
on visual presentation of information
50
Môi trường (Ô nhiễm, kiểm soát ô nhiễm và bảo tồn) Trở về đầu trang
Page 45
Dịch vụ Cung cấp Thông tin Trọn gói Tháng 12/2017 45/50
TT Số hiệu tiêu chuẩn Tên tiêu chuẩn A4
549 ISO/DIS 27916 Carbon dioxide capture, transportation and
geological storage - Carbon dioxide storage using
enhanced oil recovery (CO2-EOR)
55
550 ISO 27914 Carbon dioxide capture, transportation and
geological storage - Geological storage
59
Môi trường (Chất lượng không khí; Phát thải của phương tiện giao thông do vận
chuyển) Trở về đầu trang
551 DIN EN 1459-7 Rough-terrain trucks - Safety requirements and
verification - Part 7: Test method and determination
of noise emission; German and English version
prEN 1459-7:2017
49
552 DIN EN 17199-1 Workplace exposure - Measurement of dustiness of
bulk materials that contain or release nano-objects
or submicrometer particles - Part 1: Requirements
and choice of test methods; German and English
version prEN 17199-1:2018
69
553 DIN EN 17199-2 Workplace exposure - Measurement of dustiness of
bulk materials that contain or release nano-objects
or submicrometer particles - Part 2: Rotating drum
method; German and English version prEN 17199-
2:2018
42
554 DIN EN 17199-3 Workplace exposure - Measurement of dustiness of
bulk materials that contain or release nano-objects
or submicrometer particles - Part 3: Continuous
drop method; German and English version prEN
17199-3:2018
45
555 DIN EN 17199-4 Workplace exposure - Measurement of dustiness of
bulk materials that contain or release nano-objects
or submicrometer particles - Part 4: Small rotating
drum method; German and English version prEN
17199-4:2018
51
556 DIN EN 17199-5 Workplace exposure - Measurement of dustiness of
bulk materials that contain or release nano-objects
or submicrometer particles - Part 5: Vortex shaker
method; German and English version prEN 17199-
5:2018
61
557 ISO/TS 11665-13 Measurement of radioactivity in the environment -
Air: radon 222 - Part 13: Determination of the
diffusion coefficient in waterproof materials:
membrane two-side activity concentration test
method
37
Môi trường (Chất thải) Trở về đầu trang
Page 46
Dịch vụ Cung cấp Thông tin Trọn gói Tháng 12/2017 46/50
TT Số hiệu tiêu chuẩn Tên tiêu chuẩn A4
558 ASTM D5975-17 Replaces:
ASTM D5975-96(2004)
Standard Test Method for Determining the Stability
of Compost by Measuring Oxygen Consumption
7
559 DIN EN 14702-3 Characterization and management of sludge -
Determination of settling properties - Part 3:
Determination of zone settling velocity (ZSV);
German and English version prEN 14702-3:2017
45
560 DIN EN 17183 Evaluation of sludge density; German and English
version prEN 17183:2017
34
Môi trường (Chất lượng đất) Trở về đầu trang
561 17/30362321 DC BS EN ISO 23161. Soil quality. Determination of
selected organotin compounds. Gas-
chromatographic method
46
562 17/30363999 DC BS EN 16190. Soil, treated biowaste and sludge.
Determination of dioxins and furans and dioxin-like
polychlorinated biphenyls by gas chromatography
with high resolution mass selective detection (HR
GC-MS)
47
563 17/30364002 DC BS EN 16167. Soil, treated biowaste and sludge.
Determination of polychlorinated biphenyls (PCB)
by gas chromatography with mass selective
detection (GC-MS) and gas chromatography with
electron-capture detection (GC-ECD)
41
564 17/30364005 DC BS EN 16181. Soil, treated biowaste and sludge.
Determination of polycyclic aromatic hydrocarbons
(PAH) by gas chromatography (GC) and high
performance liquid chromatography (HPLC)
49
565 DIN 4220 Pedologic site assessment - Designation,
classification and deduction of soil parameters
(normative and nominal scaling)
73
566 ISO/FDIS 17892-8 Geotechnical investigation and testing - Laboratory
testing of soil - Part 8: Unconsolidated undrained
triaxial test
14
Môi trường (Chất lượng nước) Trở về đầu trang
567 17/30321739 DC BS ISO 20468-1. Guidelines for performance
evaluation of treatment technologies for water reuse
systems. Part 1. General
31
568 17/30321742 DC BS ISO 20469. Guidelines for water quality grade
classification for water reuse
15
569 DIN 38414-15 German standard methods for the examination of
water, waste water and sludge - Sludge and
15
Page 47
Dịch vụ Cung cấp Thông tin Trọn gói Tháng 12/2017 47/50
TT Số hiệu tiêu chuẩn Tên tiêu chuẩn A4
sediments (group S) - Part 15: Determination of the
specific residual beta activity aRβin sludge,
sediment and suspended matter (S 15)
570 DIN 38414-18 German standard methods for the examination of
water, waste water and sludge - Sludge and
sediments (group S) - Part 18: Determination of
adsorbed organically bound halogens (AOX) (S 18)
12
571 DIN 38414-22 German standard methods for the examination of
water, waste water and sludge - Sludge and
sediments (group S) - Part 22: Determination of dry
residue by freezing and preparation of the freeze
dried mass of sludge (S 22)
13
572 DIN EN 17211 Water quality - Guidance on mapping of seagrasses
and macroalgae in the eulittoral zone; German and
English version prEN 17211:2017
64
Đo lường và phép đo (Phép đo bức xạ, đại lượng điện và từ) Trở về đầu trang
573 17/30347905 DC BS ISO 11929-1. Determination of the
characteristic limits (decision threshold, detection
limit and limits of the coverage interval) for
measurements of ionizing radiation. Fundamentals
and application. Part 1. Elementary applications
54
574 17/30347908 DC BS ISO 11929-2. Determination of the
characteristic limits (decision threshold, detection
limit and limits of the coverage interval) for
measurements of ionizing radiation. Part 2.
Advanced applications
51
575 17/30347911 DC BS ISO 11929-3. Determination of the
characteristic limits (decision threshold, detection
limit and limits of the coverage interval) for
measurements of ionizing radiation. Fundamentals
and application. Part 3. Applications to unfolding
methods
51
576 BS EN 50401:2017 Product standard to demonstrate the compliance of
base station equipment with radiofrequency
electromagnetic field exposure limits (110 MHz -
100 GHz), when put into service
12
577 BS EN 62056-7-3:2017 Electricity metering data exchange. The
DLMS/COSEM suite. Wired and wireless M-Bus
communication profiles for local and
neighbourhood networks
42
Đo lường và phép đo (Đo khối lượng, thể tích, tỷ trọng, độ nhớt; Đo lưu lượng chất lỏng)
Trở về đầu trang
Page 48
Dịch vụ Cung cấp Thông tin Trọn gói Tháng 12/2017 48/50
TT Số hiệu tiêu chuẩn Tên tiêu chuẩn A4
578 ASTM D1545 -13(2017)
Replaces: ASTM D1545-
07(2012)
Standard Test Method for Viscosity of Transparent
Liquids by Bubble Time Method
3
579 BS ISO 9123:2017 Hydrometry. Stage-fall-discharge relationships 38
Thử nghiệm (Thử nghiệm điện và điện từ; Thử nghiệm không phá hủy)
Trở về đầu trang
580 17/30347740 DC BS EN 63075. Superconducting AC power cables
and their accessories for rated voltages from 6 kV to
500 kV. Test methods and requirements
52
581 ISO/TS 16829 Non-destructive testing - Automated ultrasonic
testing - Selection and application of systems
28
582 JIS Z 2320-1:2017
Replaces:JIS Z 2320-1:2007
Non-destructive testing -- Magnetic particle testing
-- Part 1: General principles
33
583 JIS Z 2320-2:2017
Replaces:JIS Z 2320-2:2007
Non-destructive testing -- Magnetic particle testing
-- Part 2: Detection media
30
584 JIS Z 2320-3:2017
Replaces:JIS Z 2321:1993
Non-destructive testing -- Magnetic particle testing
-- Part 3: Equipment
15
Thử nghiệm (Thử nghiệm môi trường) Trở về đầu trang
585 KS C IEC 60721-3-7 Classification of environmental conditions-Part 3 :
Classification of groups of environmental
parameters and their severities. Section 7 : Portable
and non-stationary use
33
Dịch vụ. Tổ chức, quản lý và chất lượng công ty Trở về đầu trang
586 BS ISO 20410:2017 Tourism and related services. Bareboat charter.
Minimum service and equipment requirements
24
587 BS ISO 28590:2017*BS
6001-0:2017
Sampling procedures for inspection by attributes.
Introduction to the ISO 2859 series of standards for
sampling for inspection by attributes
20
588 BS ISO 28593:2017 Acceptance sampling procedures by attributes.
Accept-zero sampling system based on credit
principle for controlling outgoing quality
18
589 BS ISO 28594:2017 Combined accept-zero sampling systems and
process control procedures for product acceptance
50
590 BS ISO 28597:2017 Acceptance sampling procedures by attributes.
Specified quality levels in nonconforming items per
million
28
591 DIN EN 17007 Maintenance process and associated indicators;
German version EN 17007:2017
92
592 IEC/DIS 31010 Risk management - Risk assessment techniques 100
Page 49
Dịch vụ Cung cấp Thông tin Trọn gói Tháng 12/2017 49/50
TT Số hiệu tiêu chuẩn Tên tiêu chuẩn A4
593 ISO 28590 Sampling procedures for inspection by attributes -
Introduction to the ISO 2859 series of standards for
sampling for inspection by attributes
11
594 ISO 28591 Sequential sampling plans for inspection by
attributes
39
595 ISO 28592 Double sampling plans by attributes with minimal
sample sizes, indexed by producer's risk quality
(PRQ) and consumer's risk quality (CRQ)
79
596 ISO 28593 Acceptance sampling procedures by attributes -
Accept-zero sampling system based on credit
principle for controlling outgoing quality
9
597 ISO 28594 Combined accept-zero sampling systems and
process control procedures for product acceptance
41
598 ISO 28597 Acceptance sampling procedures by attributes -
Specified quality levels in nonconforming items per
million
19
599 ISO 28598-1 Acceptance sampling procedures based on the
allocation of priorities principle (APP) - Part 1:
Guidelines for the APP approach
26
600 ISO 28598-2 Acceptance sampling procedures based on the
allocation of priorities principle (APP) - Part 2:
Coordinated single sampling plans for acceptance
sampling by attributes
51
601 KS S 2001 Educational travel services 25
Bao gói và phân phối hàng hóa (Phụ kiện và vật liệu bao gói) Trở về đầu trang
602 DIN 55545-1 Packagings - Packagings with insulating properties
- Part 1: Determination of thermal performance
11
Khoa học thông tin Trở về đầu trang
603 BS ISO 3297:2017 Information and documentation. International
standard serial number (ISSN)
30
604 BS ISO 23081-1:2017 Information and documentation. Records
management processes. Metadata for records.
Principles
30
605 BS ISO 17068:2017 Information and documentation. Trusted third party
repository for digital records
42
Lĩnh vực khác (Dụng cụ vẽ) Trở về đầu trang
606 KS G ISO 9177-3 Mechanical pencils ? Part 3: Black leads ? Bending
strengths of HB leads
6
607 KS G ISO 9177-1 Mechanical pencils-Part 1:Classification, 10
Page 50
Dịch vụ Cung cấp Thông tin Trọn gói Tháng 12/2017 50/50
TT Số hiệu tiêu chuẩn Tên tiêu chuẩn A4
dimensions, performance requirements and testing
608 KS G ISO 9177-2 Mechanical pencils-Part 2:Black
leads-Classification and dimensions
6
Để có toàn văn các tiêu chuẩn trên hoặc các tiêu chuẩn khác, vui lòng liên hệ:
Quầy dịch vụ tham khảo – Thư viện Trường ĐH Công nghiệp TP. HCM
12 Nguyễn Văn Bảo, Phường 4, Quận Gò Vấp, TP. HCM
Email: [email protected]
Điện thoại: 083.8940 390 – 131.