Titolo presentazione sottotitolo ChemicalEngineering ... · Master of Science degree course and enrolled, after having satisfied these conditions, by demonstrating his/her proficiency

Titolo presentazionesottotitolo

Milano, XX mese 20XXChemicalEngineering@POLIMI

Chemical Engineering

Why Politecnico di Milano

International ranking - QS ranking 2019

POLIMI: an Italian, European and World excellence!


Architecture & Built Environment 11 6 1Art & Design 6 3 1Computer Science & Information Systems 37 9 1

Chemical Engineering 44 12 1

Civil & Structural Engineering 7 4 1

Electrical & Electronic Engineering 23 8 1

Mechanical, Aeronautical & Manufacturing Engineering 7 3 1

Materials Science 54 14 1

Mathematics 64 17 1Business & Management Studies 67 21 2Physics & Astronomy 109 44 5

Broad subject area World EU Italy

Engineering & Technology 16 6 1

Why Chemical Engineering @ Politecnico di Milano

International ranking - QS ranking 2019

POLIMI: an Italian, European and World excellence!


The Chemical Engineer = the Universal Engineer

Chemical engineering is the process engineering: you learn methodologies of

chemical-physical transformation of matter, aimed at the production of

material goods, supply of services, risk prevention, reduction of environmental

impact, ….

Industria Alimentare

Industria Tessile

Industria Farmaceutica Industria Cosmetica

Industria Energetica Industria Petrolifera

Industria Chimica

Industria Metalmeccanica

Industria dei Trasporti

ServicesMaterials Safety Environment

Industria Petrolchimica


Employability

http://www.careerservice.polimi.it


Employability

http://www.careerservice.polimi.it


Just some stakeholders….

Employability


Laurea/BachelorChemical Engineer (3 years)

Laurea Magistrale/MasterChemical Engineer (2 years)

Doctor of Philosophy Program (PhD)

Industrial Chemistry & Chemical Engineer (3 years)

• One track• 180 CFU (15 to be freely chosen)• Possible stage (intern or external)

• In English since 2014 • 3 tracks:

Process EngineerProduct EngineerDesign Engineer

• 120 CFU (50 to be freely chosen) • Master Thesis 20 CFU

Master Degree Thesis: central moment of

training, exciting research experience within

internationally recognized research groups

Chemical Engineering @ Politecnico di Milano


50 credits for compulsory courses (mathematics, mechanical, civilengineering and chemical engineering) 50 credits for elegible courses20 credits for the thesis

3 pre-approved plans of study (PAPS):• process engineer• design engineer• product engineer

Master Degree Program - Educational curriculum

Within each PAPS, 15 credits might be chosen freely, whereas the remaining 35 credits should be selected within the groups AMB (Environment), BIO (Biology), DI (Innovative Teaching), PROC (Process), PROD (Product), SIC (Safety) e UO (Unit Operation) according to the rules detailed below.5 CFU must be selected from the courses defined as Innovative Teaching


Process engineer

Code

Educational activit

ies

SSD Course Title Language Sem CFU CFU

Group

096118 B ING-IND/24 CHEMICAL REACTION ENGINEERING AND APPLIED CHEMICAL KINETICS 1 10.0 10.0

096119 C MAT/05 ADVANCED MATHEMATICAL ANALYSIS 1 5.0 5.0

096121 C ICAR/08 MECHANICS OF SOLIDS AND STRUCTURES II 2 5.0 5.0

096122 C ING-IND/13 APPLIED MECHANICS 2 10.0 10.0

-- -- -- Courses to be chosen from Group AMB -- -- -- 10.0

-- -- -- Courses to be chosen from Group PROC -- -- -- 10.0

-- -- -- Courses to be chosen from Group UO -- -- -- 10.0

1° year


Design engineer

1° yearCode

Educational activit

ies


Group





-- -- -- Courses to be chosen from Group SIC -- -- -- 10.0




Product engineer

1° yearCode

Educational activit

ies


Group





-- -- -- Courses to be chosen from Group PROD -- -- -- 10.0




Process engineer

2° yearCode

Educational activit

ies

SSD Course Title Language Sem CFU

Group

097538 B ING-IND/27 INDUSTRIAL ORGANIC CHEMISTRY 1 10.0

097540 B ING-IND/25 CHEMICAL PLANTS II 1 10.0

-- -- -- Courses to be chosen from Group AMB -- --

20.0

-- -- -- Courses to be chosen from Group BIO -- --

-- -- -- Courses to be chosen from Group PROC -- --

-- -- -- Courses to be chosen from Group PROD -- --

-- -- -- Courses to be chosen from Group SIC -- --

-- -- -- Courses to be chosen from Group UO -- --

-- -- -- Courses to be chosen from Group DI (a) -- --

Choices in table AMB 10.0 CFUChoices in table PROC 15.0 CFUChoices in table UO 10.0 CFUChoices in tables AMB, BIO, DI, UO, PROC, PROD, SIC 15.0 CFU


Design engineer

2° yearCode

Educational activit

ies


Group




20.0







Choices in table SIC 10.0 CFUChoices in table PROC 10.0 CFUChoices in table UO 15.0 CFUChoices in tables AMB, BIO, DI, UO, PROC, PROD, SIC 15.0 CFU


Product engineer

2° yearCode

Educational activit

ies


Group




20.0







Choices in table PROD 15.0 CFUChoices in table PROC 10.0 CFUChoices in table UO 10.0 CFUChoices in tables AMB, BIO, DI, UO, PROC, PROD, SIC 15.0 CFU


How to enroll? Evaluation process (A.Y. 2019/20)

Access Requirements (D.M. 22/10/2004 n. 270, D.M. 16/3/2007)

Bachelor of Science (BSc, Laurea) or higher degree (MSc, Laurea Magistrale). Note: the evaluation process can be carried out also for students enrolled in BSc, if they are candidates in the next graduation session.

The admission to the Master of Science degree in Chemical Engineeringat Politecnico di Milano undergoes an evaluation process aimed todetermine the eligibility of the applicant. The final decision about theadmission to the Master of Science degree shall be taken by an EvaluationCommission (contact: prof. Carlo Giorgio Visconti, [email protected])set up by the Board of Studies.

mailto:[email protected]


How to enroll? Access requirements (A.Y. 2019/20)

Additional requirements:

a) Graduation at the BSc no later than 31 October of the 6th year (12 semesters) after the first enrolment. Such requirement does not apply for candidates having a MSc.e.g. first enrolment in 09/2013: BSc should be obtained before 31/10/2019Note: the number of years for achieving the Bachelor of Science (“N”), is the half of the number of semesters occurring from the year of first enrolment in any University to the achievement of the BSc Graduation (semesters end at March 31st or October 31st).

b) weighted average (WA) or average graduation mark (AGM, expressed in 110) not below the “adjusted” admission SCore.WA > SC where SC = 22 + 1*(min(6,N) - 3) for students from PoliMiAGM > SC where SC = 90 + 5*(min(6,N) - 3) for students from other Univ.

c) certification of the English language proficiency.The level of English language knowledge should be certified according to the standard fixed by the Politecnico’s Academic Policies (see Politecnico website)


How to enroll? Access requirements (A.Y. 2019/20)

Additional requirements:

d) further subjects and knowledge not required.Applicants can be admitted to the MSc in Chemical Engineering when their BScdegree programme is evaluated as being “consistent” with the studyprogramme of the MSc degree course. The Evaluation Commission verifiesthese requirements, also ascertaining the need of imposing any prerequisite(i.e. additional compulsory modules) to fill possible gaps.

An applicant who has been assigned any prerequisites may attend “IndividualCourses” in the period before the enrolment to the MSc (max 80 credits). Thefollowing opportunities exist:

• earn credits related to the additional compulsory modules. These credits shall benot accounted within the 120 credits required for the MSc degree;

• earn credits by passing courses at the Master of Science level. These credits (max32), will be accepted to part of the 120 credits necessary for the Master of Sciencedegree. Credits in excess of 32 could be only accepted as ‘over-limit exams’.

If an applicant does not pass the exams assigned as compulsory prerequisiteswithin 18 months, he or she forfeits his/her right to admission totally andcompletely.


How to enroll? Evaluation process

• Candidates with a BSc in Chemical Engineering issued by any Italianuniversities, who meet the requirements stated above, are automaticallyadmitted to the Master of Science degree course.

• If the requirements stated at either point a) [TIMING] or b) [AVERAGE] of theabove list are not satisfied, the Commission will not admit the applicant tothe Master of Science degree course, unless documentation testifying aproven exceptional case can be presented.The Commission may take into account a valid documentation showing clearexceptional conditions, justifying the non-compliance of the mentionedcriteria and showing that the student has an adequate background. Such adocumentation shall be attached to the admission application.

• For candidates with other BSc (not in Chemical Engineering), in addition tomeeting the above requirements, admission is subject to examination byEvaluation Commission.


How to enroll? Evaluation process

• If the requirements stated at either point c) [ENGLISH] or d) [CONSISTENCY]of the above list are not satisfied, the applicant will be accepted to theMaster of Science degree course and enrolled, after having satisfied theseconditions, by demonstrating his/her proficiency in English and/or obtainingthe necessary prerequisites identified and communicated by the Commission.

Note: if the applicant is admitted, compulsory additional subjects shall becommunicated together with the admission and before enrolment, in order toprovide students with the necessary information for a transparent and rationalchoice.


Chemical Engineering @ Politecnico di Milano

International programsWhy an experience abroad?• To learn a new language• To learn about different

cultures• To become citizens of the

world• To deepen some topics• To share your knowledge

Incoming students Outcoming students

Exhange programs Erasmus Bilaterla agreement

(UE e Extra-UE) Double degree

(UE e Extra-UE)Fonte: Ufficio Mobilità Internazionale POLIMI


Politecnico di Milano

Raffaello, The school of Athens, 1509

Apostolic Palace, Roma

Titolo presentazione sottotitolo ChemicalEngineering ... · Master of Science degree course and enrolled, after having satisfied these conditions, by demonstrating his/her proficiency

Documents