[Title will be auto-generated]

Inside Talk: The Master of Rubble p. 50

Volume 13 • No. 4 July - August 13

Attachments!

Reports

Putting Trust in North and South America

pages: 35-36

Site Report

Demco’s Unicut Wire Saw On the Job

pages: 18

Servitécnica improved the Production at Brazilian Papermill pages: 56-57

Special Feature

More Dealing Than Wheelingpages: 46-48

Reports

Lehnhoff at the “Hard Work Café”pages: 54-55

pages: 26-34

Reports

Quick Couplers with Family Tradition

pages: 40-41

Site Report

Wimmer Helping in the Alps

pages: 45

Hilti Corporation I 9494 Schaan I Liechtenstein I www.hilti.com

The mobile withapps you’ll love.

Hilti. Outperform. Outlast.

Hilti DST 10-CAelectric wall saw system

DS TS 20-Eelectric wall saw

DD 350 / DD 500coring system

It’s a world’s first: CutAssist is the electronic assistant that raises your sawing productivity tremendously. Moreover, the new Hilti DST 10-CA electric wall saw system with high-frequency motor also brings you new-found freedom – thanks to wire-less remote control.

DST 10-CAelectric wall saw

DSW 3018-Ewire saw

DS WS 15wire saw

Hilti Corporation I 9494 Schaan I Liechtenstein I www.hilti.com

The mobile withapps you’ll love.

Hilti. Outperform. Outlast.

Hilti DST 10-CAelectric wall saw system

DS TS 20-Eelectric wall saw

DD 350 / DD 500coring system

It’s a world’s first: CutAssist is the electronic assistant that raises your sawing productivity tremendously. Moreover, the new Hilti DST 10-CA electric wall saw system with high-frequency motor also brings you new-found freedom – thanks to wire-less remote control.

DST 10-CAelectric wall saw

DSW 3018-Ewire saw

DS WS 15wire saw

Special Features

Professional Demolition International Magazine

Address: P.O. Box 786, SE-191 27 Sollentuna, SWEDEN

Visitors address:Sjöängsvägen 7, SE-192 72 Sollentuna, SWEDEN

Phone: +46 8 631 90 70Telefax: +46 8 585 700 47E-mail: [email protected]: www.pdworld.comISSN Registration: ISSN 1650-979X

EDITORIAL STAFFEditor-in-ChiefJan Hermansson, [email protected]

Assisting Editor-in-ChiefAnita do Rocio Hermansson, [email protected]

Editor Europe: Mikael Karlsson, [email protected]

Editor North & South AmericaJim Parsons, [email protected]

Editor Demolition: Mark Anthony, [email protected]

Editor Recycling: Heikki Harri, [email protected]

Editor Asia Pacific: Barbara Grace, [email protected]

Editor Russia & Eastern EuropeAndrei Bushmarin, [email protected]

Editor AfricaKevin Mayhew, [email protected]

SALES OFFICESInternational Sales DirectorGermany/Austria/Switzerland/Liechtenstein/BeneLux/Finland/France/Spain/PortugalAndrei BushmarinPhone: +7 921 949 27 81E-mail: [email protected]

Sweden, Norway & DenmarkContact the Editorial OfficePhone: +46 (0)8 631 90 70, Fax: +46 (0)8 585 700 47E-mail: [email protected]

ItalyMonica Colleoni & Romano Ferrario, Ediconsult Internazionale S.r.l.Via Savona 97, 20144 Milano, ItalyPhone: + 39 02 4771 0036, Fax: + 39 02 4771 1360E-mail: [email protected]

North & South America, UK & IrelandDarren DunayDunay AssociatesP.O. Box 119, Westwood, NJ 07675, USAPhone: +1 201 781 6133, Fax: +1 201 664 1829E-Mail: [email protected]

Australia/New Zealand/Asia Pacific/Korea/Japan and rest of the world:Contact PDi editorial office in Sweden.

PublisherJan HermanssonThe magazine PDI, Professional Demolition International is published five times per year with a worldwide circulation of 10000 copies. The annual airmail subscription rate is US$ 45. All subscription correspondance should be directed to: The subscription department, SCOP AB, P.O. Box 786, SE-191 27 Sollentuna, Sweden. PDI is mailed by second class postage. ©Copyright SCOP AB 2000-2013

Cover photo: © Cat Work Tools

CONTENTSPDi • issue no. 4-2013 July - August • Volume 13

REGULARS

4 PDi • Issue 4 • July - August 2013

PDi Magazine is a member of the following associations: 26-33 New demolition attachments

46-48 More dealing than wheeling

Editorials 6 Also branch magazines suffer in bad times

“Let’s create a Smorgasbord of courses to choose from”

Open house: New EDA president submits her first column

Open Columns10 Dust suppression system from Dynaset for demolition tools

12 “Looking forward”

Business8 New Volvo CE vice president, corporate communications

Metso acquires Chinese steel foundry

CDE’s global programme of open week events

Strong second quarter for Wacker Neuson

10 Chicago Pneumatic’s new website

“Best of” design award for Hilti hollow drill bit

Construction equipment industry meets in Brussels

12 Worx+ concrete solutions

Remu looks for dealers

Liebherr starts new logistics centre

14 Pullman Ermator acquires Pullman-Holt’s HEPA vacuums

Honours and gold for Keltbray

Boels progression into dust suppression

A first for a Terex Mac 25 pick and carry crane

44 South African legislation lagging behind Europe

53 US road construction to increase by 3.5% through 2013

News16 New Allied-Gator MT technology changes shearing

Rino, the fog maker of solutions

22 New Genesis XT mobile shears

Polaris has acquired HTC

39 New Pan-American demolition magazine

42 Cape Town tackles rubble dumping

Brokk establishes sales company in Switzerland

Pile driving in South Africa

Site Report18 Historic lock restored in the UK

Keltbray complete phase 1 demolition at London Bridge

Demco Technic’s Unicut wire saw on the job

21 A successful hospital co-operation

24 Gentle repair of an old Russian Bridge

45 Wimmer helping in the alps

HTC grinding technology in Swedish research project

56-57 Servitécnica improved the production

Reports35-36 Putting trust in North and South America

40-41 Quick couplers with family tradition

54-55 Lehnhoff at the “Hard Work Café”

Inside Talk50-51 The master of rubble

Associations58 CSDA’s new electric safety video

Train more and save with CSDA

NDA testifies on Philadelphia building collapse

Las Vegas for NDA convention 2014

US NDA’s new director

WHERE EXPERIENCE COUNTS

Furukawa Rock Drill Europe BV

Proostwetering 29, 3543 AB Utrecht, The Netherlands

Phone +31-(0)30-2412277, Fax +31-(0)30-2412305

www.frd.eu, [email protected]

The specialist in demolition and rock excavation.

“For every job

the right tool”

D_R_Breakers 1.1-FX Series.indd 1 19-08-13 10:04

Dear Reader

The holiday season is either over or ending for us in the Northern Hemisphere. I would

say most of us are coming back to a difficult business climate and that certainly goes

for us that produce business related magazines. Something that has always surprised

me is that when things get tough many companies dramatically cut their costs for

marketing, almost like in a panic. I understand that all variable costs are the first to

be cut before cutting salaries and personnel. But still for manufactures, distributors,

agents or contractors that offer services, exposure is an absolute necessity. Nowadays

when efficiency is vital it should be even more important. Previously when labour

costs were less expensive sales forces were much bigger and manufacturers and sales

companies could spread the message face to face by their own personnel. But today

it seems to be done very much with the help of social media, exhibitions, direct mail

and trade magazines.

But as soon as things change and there is a new recession approaching companies

put the breaks on. As we are a specialised trade magazine publisher we are a ther-

mometer for the market’s health. We always get the first signals when a recession is

approaching. I wish it was the same for upturns in the economy. But when there is

a boom manufacturers try to make up for the loss of exposure during the recession,

a loss that they have created themselves. Why not do almost the opposite. Here in

Sweden there is a saying “Gather in the barns” during good times so you do not need

to go down in standard that much during difficult times. It does not matter how

much exposure you create during good times, even if it is three times as much as

your competitors, if you are almost invisible during bad times you are forgotten. And

unfortunately the market forgets fast. So my recommendation is to provide a more

even exposure over good and bad times and try to stay visible. Try to spend more

or less the same amount of money in bad and good times. But for that to function

some planning is needed. Maybe a marketing fund or an endowment can be a good

idea where marketing money is saved for bad times.

For trade magazines like PDi that are independent, without any support from

branch associations, large fluctuations in the economy are quite difficult to manage.

It is a struggle to maintain the same quality level in terms of producing in-depth

features, surveys, site visits, company profiles and attend trade shows around the

world. But as PDi was set up in 2000 we have experienced several ups and downs

and managed to get through.

Let us hope that the rest of 2013 will

result in a slight improvement all over the

world and that it will continue to a more

stable and strong market in 2014. The last

decade has been a little bit of a rollercoaster

for everybody.

Jan HermanssonEditor-in-Chief

[email protected]

Words from the IACDS President

“Let’s create a smorgasbord of courses to choose from”


Phot

o: V

ito G

ogol

a.

Also branch magazines sufferin bad times

www.husqvarnacp.com

Copyright © 2013 Husqvarna AB (publ.) All rights reserved. Husqvarna is a registered trademark of Husqvarna AB (publ.)

husqvarna high frequency technology. light equipment for heavy jobs.

I’ve lost 88 kilos this week.The new husqvarna K 6500 electric power cutter really makes you feel the force of a new generation high frequency technology. A massive 5.5 kW (using 3-phase) output at the spindle means outstanding power/weight ratio. And you’ll easily move it around, the K 6500 and the PP 65 power pack weighs only 10 kilos each. That’s 88 kilos less than equivalent hydraulic systems! Visit our website today for more information, videos and contact details.

We have had a fantastic summer, especially in the far Northern Hemisphere where I live. Everyone I have spoken to after the holidays have been so positive. It seems as if all have found strength for the autumn and everyone is talking about the great summer we had. It seems that not only in Sweden we had good weather it has also applied across other parts of Europe. This shows to me the importance of ‘high pressure’.

If we look at our industry the situation is quite different, as we do not have high pressure. In the best case we could say that what we have right now are scattered showers. The industry mainly talks about how difficult it is to recoup the work and the problem is the cost of labour. If you have a well established company, a company with its own staff that has been working with demolition and concrete cutting for say 6-10 years you at least have notice of 4-6 months, in Sweden. Compare that with the anticipation you have when you are counting on jobs. Besides this the staff in an older company also have higher wages than a young company. We know of this and may also explain the difference for our clients. We are more expensive because we have trained and skilled workers and thus slightly higher overheads. Minimum wages in the construction industry in Sweden are today about SEK140/h (EUR16). The problem today is that we can hire staff for under SEK100/h (EUR11.5), but on the news we can see examples of how companies have found labour for about SEK50/h (EUR5.75).

Labour costs have fallen to completely un-sustainable levels, which is impossible for serious companies. How is this possible? A carpenter who currently works with new house production is of course more or less a fitter. The houses will be delivered as if they were packaged by IKEA and assembled on site. Read the manual and you have in eight steps installed a whole house, simply speaking. To become a carpenter or concrete worker and carry out this work a special training is required, of course.

The concrete cutting and demolition business is today one of the hardest and heaviest occupa-tions in the construction industry with dismantling, sorting, recycling, landfill, knowledge in statistics, hardware knowledge and personal protection. There are no manuals for this job. The list of the required knowledge of our workers to demolish a house can in principle be any length. But no-where around the world is there special training for this profession. We can possibly find shorter induction programmes, but no training that takes a comprehensive approach to concrete cutting or demolition. Here I see that we as an association need to do much more. Instead of betting on long uniform high school training for concrete cutters

and demolition contractors, compared with three years of training to become a carpenter, I see a lot of small-certified short courses. Courses that you can pick from just like a smorgasbord. For example in Sweden we have no requirement for training to handle a demolition robot. I think this is really weird as we have all the manufacturers of demolition robots in our country. I believe it requires training for the same type of work in England. How hard can it be that we are all working for the same goals and to implement the programme in all EU countries? In the same way, we could work our way through a smorgasbord.

We do not expect that anyone involved in the European demolition and concrete cutting industry should have a long and uniform, relevant educa-tion. But we require training for people working with PCBs. Compare also with asbestos work, here there is a four-day training and it is the same for all EU companies. Let it be the same thing say for silica, arsenic, creosote, soil remediation, driving compact loaders on a work site and more. What we should focus on in all branch associations is to create shorter courses for contractors in differ-ent types of disciplines and the training courses should be standard all over Europe. If a contractor is tendering for a job without having undergone a training course that is required he should not even be able to tender for the job. Each training course alone should not be long or expensive.

I will expand my proposal and in more detail in my next column. But it is my firm belief that this type of smorgasbord, with many short courses, is a perfect way for concrete cutting and demolition industries to have unified and legitimate licensing. To learn and by legislation force clients to use only licensed personnel is the best way of eliminating cheap and unskilled labour. Professional contrac-tors can never compete with extremely low labour costs, but we can always take up the game as long as we talk about skills and training.

Lars SandströmPresident of IACDS

www.husqvarnacp.com

Copyright © 2013 Husqvarna AB (publ.) All rights reserved. Husqvarna is a registered trademark of Husqvarna AB (publ.)

husqvarna high frequency technology. light equipment for heavy jobs.

I’ve lost 88 kilos this week.The new husqvarna K 6500 electric power cutter really makes you feel the force of a new generation high frequency technology. A massive 5.5 kW (using 3-phase) output at the spindle means outstanding power/weight ratio. And you’ll easily move it around, the K 6500 and the PP 65 power pack weighs only 10 kilos each. That’s 88 kilos less than equivalent hydraulic systems! Visit our website today for more information, videos and contact details.

Words from the EDA PresidentOpen house: New EDA president submits her first column

Pilar de la Cruz, EDA President, VD Voladu-ras Demoliciones y Desguaces SA, Spain

Since the last issue of PDi there has been a change of leadership at the European Demolition Association and PDi Magazine would like to take the opportunity to thank the former president Giuseppe Panseri for his contributions in the magazine. We also would like to welcome the new president Pilar de la Cruz. We are very happy to announce that Pilar is actually the first woman in this position. Below is her first column:

I am Pilar de la Cruz, a second generation demolition professional from Madrid, Spain. It is my honour and pleasure, as president of the EDA, to address you through this column, as my good friend and colleague, Giuseppe Panseri, has been doing over the last couple of years.

My duty as president started recently at the EDA Convention held in Milan, so I will be following up on the work of my prede-cessors, becoming the first EDA president from Spain. I hope that you can use the comments I am sharing in this column, as food for thought.

As the summer is getting close to its end, there is an image that comes to my mind to start this column, which is ‘open house’. In most of Spain, with the heat of the summer, the houses warm up during the day, and it is so pleasant to open the windows and doors at night to get some fresh air coming through. Everything stays the same in the house, but feels so good to have a natural breeze, which is more intense towards the end of the summer.

Over recent years I have listened to many of my colleagues at the EDA speak about the generational change, and also the changes to companies that come with the new generations. And being a second generation demolition professional myself, who had the opportunity to learn about the industry directly from my father, I do feel the change.

As it has been said before, the world has changed so much over the last few years, so our companies also have had to adapt quickly to these changes to survive. But, most importantly for me, the demolition industry has changed so much that it is also a good time to open the house.

The demolition industry is no longer just about taking down a building or structure. This industry is about handling the space change, taking care of customers’ needs to ‘leave an empty space’, as my good friend and demolition expert Beatriz Petralanda

says. To do so, we need to work together with other industries connected to demoli-tion. And I believe these industries should all be seeing it as part of what is now called deconstruction, which is hazardous waste decontamination, concrete sawing and drilling, dismantling, decommissioning, demolition, preparation for recycling and recycling. These activities are all connected.

So in order to generate this fresh breeze, the EDA is inviting all related industries to celebrate next year with an open conference to include debating sessions about our work together, called “Deconstruction forum”. It will be held on 12 to 14 June 2014, so please save these dates in your diaries and further information will be made available in the weeks ahead.

Pilar de la CruzPresident of the European Demolition Association

About EDAThe EDA was founded in 1978 and is the leading platform for national demolition associations, demolition contractors and suppliers. The EDA has a strong focus on developments in Europe, which are of interest to the demolition industry.

[email protected] www.europeandemolition.org


EDAEDA

New Volvo CE vice president, corporate communicationsAnne Bast has been appointed vice president, corporate communications of Volvo Construc-tion Equipment’s Europe, Middle East and Africa organisation. Baste will be part of the local executive management team will helping to drive internal communications and press relations for the region, as well as continuing to develop corporate communication standards and practices for com-munications across the sales and manufacturing businesses.

Bast will be based at the regional headquar-ters in Eskilstuna, Sweden, and will co-ordinate the communication of global and regional information, reporting to regional president Tomas Kuta. She has a degree in business administration and economics from Sweden’s Mälardalen University and joined Volvo CE in 2000, where she has held a number of international positions. These have included the management of global internal com-munications at Volvo CE’s Brussels headquarters and leading Volvo CE’s corporate communica-tions efforts in the Asia Pacific region, based in Singapore. “I am excited about this opportunity and look forward to working in the diverse markets that make up Volvo CE’s largest geographical sales region,” said Bast. “Encompassing everything from emerging markets in Africa, to new production investment in Russia and introducing the latest engine technology in Europe; this region has it all.”

www.volvoce.com

CDE’s global pro-gramme of open week eventsThe Northern Ireland washing equipment manufacture CDE Global will host a programme of open week events in 10 countries between August and December 2013. The events will be in Europe, Africa, Latin America, North America, the Middle East and Australasia and will begin at the end of August. “This is the most ambitious series of open week events that we have ever undertaken,” said CDE Global head of marketing and sales support Peter Craven. “Some of the countries included are the UK, France, Germany, USA, Australia, Russia and Brazil. This will allow us to demonstrate our capability across a wide range of materials to potential customers in these markets.” Visitors to the various events will have the opportunity to see CDE equipment process-ing materials from sand and gravel, heavily clay bound limestone, construction and demolition waste material and silica sands. Every piece of CDE equipment will be on show throughout the programme.

www.cdeglobal.com

Metso acquires Chinese steel foundryMetso has completed the acquisition of the steel foundry in Quzhou City, Zheijang Province, 400 km Southwest of Shanghai. The assets of Quzhou Juxin Machinery and Quzhou Chixin Machinery and approximately 220 employees have been transferred to Metso. The value of the acquisition has not been disclosed. The acquisition improves Metso’s capabilities to supply wear parts to its mining and construction industry customers in China and other markets in Asia-Pacific

“I am really pleased that we were able to close this important acquisition,” said Metso mining and construction services business line president João Ney Colagrossi. “ It gives us good starting point to

develop the Quzhou foundry as part of Metso. We already have the most extensive services centre and distribution network in our industry. With this acquisition we will strengthen our manufactur-ing presence in China and further develop our services business.”

Strong second quarter for Wacker NeusonThe light and compact equipment group Wacker Neuson has reported an upturn in business in the second quarter of 2013, compensating for the weak start to the year. Second quarter rev-enue increased by 15.8% reaching EUR329M compared to EUR284.2M in the same period last year. The onset of construction activity in April had the effect of relieving market tensions resulting from the late start in some countries. “2013 got off to a slow start due to sluggish economies in many target markets and poor weather conditions in the northern hemisphere. In Q2, however, our revenue rose 28% on the prior-year quarter to a new record high for the company. Despite a significantly more intensive competitive landscape, we were able to suc-cessfully maintain and in some cases expand our position,” said Wacker Neuson SE chief executive officer Cem Peksaglam.

www.htc-fl oorsystems.com

AGGRESSIVE TOOLSAGGRESSIVE PRICE

The new Greyline™ Superprep™ tools are aggressive in many ways. With developed matrix technology we have managed to create extremely aggressive tools to an even more aggressive price.

Contact your HTC dealer today at: www.htc-fl oorsystems.com

PRICE FROM

€32

HTC PRESENTS THE ALL NEW GREYLINE™ SUPERPREP™ SERIES

GREYLINE SUPERPREP series

Tools for various fl oor prep tasks including removal of coatings, asbestos, glue or any other residue.

PDi_3_2013.indd 1 6/5/13 3:26 PM


Chicago Pneumatic’s new websiteChicago Pneumatic has launched a new smartphone and tablet compatible version of its website to provide customers with on-the-move access to the company’s latest news and product information. Customers are also able to view the company’s website in a consistent manner regardless of the platform, be it a desktop computer, laptop, tablet or smartphone. With the latest research predicting that by 2016 two thirds of the world’s mobile workforce will own a smartphone, CP has re-developed its website to enable customers to quickly and easily research, compare and specify products from its extensive portfolio of construction tools, generators, light towers and portable compressors.

The smartphone and tablet versions of the site complement the existing CP desktop website, and have been designed to provide users with an optimum and efficient viewing experience. The CP websites will recognise the type of device the visitor is using and adapt the website format to suit the size of this device. This enables CP to meet visitors’ needs and make it easy to navigate the websites. The use of web responsive design also guarantees easy reading and navigation with a minimum of resizing and scrolling, as the layout adapts itself to the screen size of visitors’ devices. On smaller screens, like smartphones, tablets, the website will always show at its optimum, no matter which device the visitor is using.

www.cp.com/en

Dynaset has the complete solution for dust sup-

pression for demolition tools fitted to excavators.

Best place for high-pressure dust suppression

nozzles is where dust rises. Atomized high-

pressure water fog builds a sealing blanket

around the dust source. Visibility is much better

as the water fog targets the area between the tool

and demolition. This means faster work, more

productivity without wetting the material, cleaner

environment, and savings on filters.

Most demolition tools have 360° rotation

with a hydraulic swivel joint, but not all manu-

facturers have a line for dust suppression water.

High-pressure dust suppression only needs a

6mm to 10mm bore in the joint and should be

easy to add to the swivel.

Dynaset has been talking to manufacturers

of crushers, grapples and pulverisers requesting

they add a line for dust suppression water. But

so far manufacturers are not incorporating a

dust suppression line in their demolition tools as

factory optional equipment. According to Dynaset

some manufacturers have even removed the

hole in the rotation joint that could take the dust

Dust suppression system from Dynasetfor demolition tools

suppression line.

Dynaset has been pushing high-pressure

dust suppression technology for construction

machinery for over 10 years and the atomised

water fog has been proven in fire fighting for

many years. In 2013 Dynaset HPW dust

technology won an award for maintenance

work development in Finland.

Dynaset is requesting that demolition tool

manufacturers make provision for a water line

in rotation joints to make work for demolition

contractors easier and provide for a cleaner

environment.

Construction equipment industry meets in Brussels“Towards a competitive industrial production for Europe” is the title of the conference of the con-struction equipment and agricultural machinery industry to be held in the European Parliament in Brussels on 16 October 2013. President and chief executive officer of Volvo Group Olof Pers-son and Fiat Industrial chief operating officer and president of Case IH and Steyr Andreas Klauser, will outline the perspectives of the sectors. A panel discussion with politicians, legislators and industry leaders will look at the possibilities for a better set of ‘smart’ sector specific regulations of how to make relevant product legislation more realistic, coherent, internationally aligned and stimulating for innovations and competition instead of costly and burdensome. A second round will focus on conditions for keeping competitive production of construction equipment in Europe. This will be followed by the annual CECE information ses-sions where CECE will focus on the construction industry’s opportunities in the African market. The conference is open to company representatives from the European construction equipment and agricultural machinery industry and invited guests. Due to the European Parliament’s security requirements, delegates must register online at www.cece-cema-summit.eu at least 14 days prior to the event. Participation fee is EUR295 excluding VAT.

“Best of” design award for Hilti hollow drill bitHilti was successful at the “red dot: product design 2013” competition and in addition to garnering several product awards at the prize ceremony in Essen, Germany, its new hollow drill bit, earned a “Best of the Best” award.

The scoope of Hilti products taking home a red dot award was considerable and included two diamond coring systems, a cordless rotary hammer,

two dust removal systems, two chemical anchor dispensers and Hilti’s first cordless combihammer. The new hollow drill bit earned a particular distinc-tion and given the “Best of the Best” award. The drill bit allows dust to be removed from the drilled hole, during the drilling process, for the first time.

“We are very happy to have received so many awards, particularly the ‘Best of the Best’ designa-tion by the jury of experts. This is recognition for a design innovation that sets new standards regarding work safety and efficiency,” said Hilti chief designer Stephan Niehaus.

Founded in 1955, the red dot award is among the most renowned design awards in the world. A jury of independent experts evaluated products in 19 categories in terms of degree of innovation, functionality, formal quality, ergonomics, durability and ecological compatibility. This year’s competition featured more than 4,600 products submitted by over 1,850 companies from 54 countries.

www.hilti.com

With Brokk 60, we take another giant leap in safe and effi cient demolition for confi ned spaces. This little giant is stronger, offers faster movements,a new control system and an even lower profi le.The low weight makes the machine ideal for indoor jobs on weak fl oors and can even be transported in a standard passenger elevator.Brokk 60 is one size bigger in everything. Except just the size.

Brokk AB | Box 730, 931 27 Skellefteå | www.brokk.comCEMENT PROCESS NUCLEAR TUNNELING MININGCONSTRUCTION

Born:

The world’s smallest giant

BROKK 60 – A SMALL WONDER IN REMOTE CONTROLLED DEMOLITION

Heger Excellent Diamond ToolsMade in Germany

New Heger core drill


Worx+ concrete solutionsThe Austral ian company Worx+ br ings together a team with extensive knowledge of the facets of the concrete grinding and polishing industry. The Worx+ team, formerly the founders of King Concepts, has operated in the fields of manufacturing and distribu-tion of grinding equipment, global product management, global training and support, global repair and service and possess leading contractor knowledge and experience. Worx+ has a commitment to better the bottom line of their customers’ business through sharing solutions and knowledge.

The Worx+ product line focuses on the needs of concrete grinding and polishing operators, with an impressive line of diamond tools, accessories, spare parts and equip-ment service options for surface preparation and polishing applications across many different machinery brands. Solutions have been designed to save the time, increase effectiveness, remove purchase risk, grow knowledge and support daily operations. Each product is application proven ensuring that only products with tangible benefits are delivered to customers.

www.totallyworks.com

Remu looks for dealersRemu, the Finnish manufacturer of screen-ing buckets, plants, floats and amphibious excavators, is looking for dealers in various locations in Sweden. The supply chain and dealer network in Sweden will be renewed, and customers can contact Remu directly in Sweden at +46 (0) 76-9090090 or email [email protected]. Demonstrations and customer visits can be arranged.

More than 20 years of experience in processing different materials like soil, peat, class, and gypsum has provided Remu with experience in material processing. In addition to its products, Remu has the knowledge to offer its customers suggestions that are best suited to specific applications.

Remu manufactures screening buckets, plants, big floats and am-phibious excavators, in Southern Os-trobothnia, Ähtäri, Finland, where it has had premises since 1997. All Remu

Richard Vann is managing director of the RVA Group, a UK based specialist engineering consul-tancy providing management services for large scale, high hazard and complex decommission-ing, decontamination, dismantling and demolition projects. He is a past president of the Institute of Demolition Engineers and the Institute of Explosives Engineers. He has almost 30 year’s demolition and decommissioning experience, and plays a pivotal role in continuing to shape industry developments.

Of course the global economic climate of recent years has brought many negatives to the demolition sector. The pressure to undercut com-petitors’ prices to win work has become so great that unfortunately some demolition firms have not had sufficient resource to execute projects to the required standards, and many others have gone out of business all together, however there have also been a number of positive developments.

I applaud the cultural change taking place within the discipline. A shift in mindset now sees more and more demolition and decommission-ing engineers, managers and directors striving to future proof their careers and businesses by continually developing their skills and knowledge.

This has certainly been the case in the UK, helping the sector attain a greater level of credence worldwide. We are increas-ingly seeing the experience of the most technically equipped professionals be-ing sought overseas. There are some similarities across the US and Europe, but UK standards and methodolo-gies are commonly recognised as the benchmark. Further afield in the Middle East and Asia for instance, clients readily acknowledge that UK expertise can add a great deal of value to their projects, hence a number of UK organisations have a growing international client base.

Significant progress too has been made with the management of waste. Since its inception demolition has been a committed recycler, acknowledging the commod-ity value and demand for materials that can be salvaged during domestic, commercial and heavy industrial executions of work. In reality demolition was probably one of the first ‘green’ disciplines, and as global environmental

products are designed and manufactured in Finland while only some components are imported from other countries. About 90 % of the turnover comes from exports and the most important countries are France, US, UK and Sweden, but Remu products are sold to several countries in Asia and Africa, as well as Australia. Remu has 38 employees in Finland, and subsidiaries in the US, Germany and Norway.

www.remu.fi

Liebherr starts new logistics centre In July 2013, the Liebherr Group began con-struction of a new logistics centre near Kirchdorf an der Iller, Germany and will be where spare parts for Liebherr earthmoving machinery will be supplied around the world. In the long term, spare parts logistics for other construction ma-chinery divisions will also be based here.

It is anticipated that the first building exten-sion phase will be completed in the third quarter of 2014. This covers site development, erection of a logistics warehouse over an area of approxi-mately 47,000m2, as well as the construction of a separate administrative building. The site should be operational within the third quarter of 2015. The investment for the first extension phase is over EUR100M. In the final phase, Liebherr will have a warehouse area of about 170,000m2, as well as an administrative building covering an area of 4,500m2 on the 360,000m2 site.

Several factors were decisive in selecting the location, including the proximity of the A7 autobahn, as well as the area available for further expansion. Another factor was the large number of Liebherr construction machinery plants in Southern Germany, Austria and France.

For parts storage, a 38m high-bay with 60,000 spaces for pallets will be built and for logistics, there will be a 29m warehouse for 122,000 containers with a potential for handling 3,500 containers/h. In the remaining, 20m high part of the building, provision will be made for manual storage areas with 25,000 pallet spaces and a storage zone, as well as workspaces for customer specific consignment, packaging and dispatch. Using 22 transport loading bridges, the spare parts will loaded onto lorries and vans and sent to customers and dealers by the quickest route possible.

www.Liebherr.com

Looking forward

regimes have become more robust, clients have heightened their commitment to reducing, reus-ing and recycling.

We are also enjoying and encouraging the greater level of teamwork and tripartite alliances being forged between client, contractor and consultant. As project complexities and chal-lenges increase, leading demolition professionals are seeking to share knowledge and specialist insight. The industry has come a long way in its willingness to communicate and peer-interact; this momentum should not be lost.

Demolition is not a black art, and the likeli-hood is that many challenges will have been encountered in some form or other before. There is sufficient expertise and talent within demolition for us to devise safe, environmentally sound and cost-efficient solutions that demonstrate the degree of engineering aptitude within our specialist field, should we be open enough to embrace them.

Adversity is after all, the mother of progress.

By Richard Vann

Richard Vann is managing director of the RVA Group in UK.

14 PDi • Issue 4 • July - August 201336B-10L Namdong Industrial Complex, 610-9, Namchon-dong, Namdong-gu, Inchoen, 405-100, Korea

TEL. +82.32.820.3801 I FAX. +82.32.810.3456 I E-mail. [email protected]

TM

The bitterness of the copie’s low quality remains longer than the sweetness of low price.

The Original is Here

A wide range of ARIX technology products suit its perfor-mance to your desire at all times.

Products

ARIX Technology is to place diamond grits precisely in three dimensional patterns and to deliver the best performance to you in all cases.

ARIX Technology

(Control the space among diamond grits, wide (L0) or narrow (L1), as you want)

WX FX HX

GX Asphalt Blades Green Concrete & Prestressed

Ring Saw Blades Diamond WireCX

Get the Original, ARIX.Make you different !

Pullman Ermator, one of the leading manu-facturers of dust collectors, air cleaners and wet vacuums, has acquired all models of dust/wet vacuums and all HEPA vacuums from Pullman-Holt in the US. Along with the product range, Pullman Ermator has also acquired the rights to the trademark name Pullman-Holt and PHC.com.

“This will help us to expand our presence in the market, not least because the product range from Pullman-Holt is well known and popular in the industry,” said Ermator US sales director Fredrik Åkermark.

Pullman-Holt started 85 years ago and is now one of the leading manufacturers in the US of dust and vacuum cleaners with HEPA filters. The company is based in Tampa, Florida and for the last nine years has been owned and controlled by Ron Underwood, who also owns the Canadian companies Michaels Equipment and Advantage Main-tenance Products.

“We will invest in the brand Pullman-Holt with continued research and development and will also add several new products to the range,” said Pullman Ermator owner Torbjörn Bengtsson. “Ermator wil l also work with Pullman-Holt’s brand to increase visibility through the efforts of our sales representa-tives to inform and educate retailers and end users.”

In September Ermator US will expand their premises by moving into the Pullman-Holt building complex.

www.ermatorusa.com

Honours and gold for KeltbrayIn the UK Brendan Kerr, the owner and chief ex-ecutive of construction and engineering specialist Keltbray, has been invited for membership as a Fel-low of The Royal Institution of Chartered Surveyors.

“Membership of the RICS is normally via ap-proved academic achievement and assessment of professional competence,” said RICS president Alan Collett. “However, from time to time, we identify people, like Brendan, who because of their considerable knowledge and experience in the sphere of land, property or construction, are eminently suitable for membership.”

Brendan has developed a reputation for raising the standards of the demolition and deconstruction sector, and transformed the industry’s reputation from a ‘let’s knock things down’ mentality. Under Brendan’s leadership Keltbray has developed into a company that takes pride in maximising recycling opportunities and preserving heritage through complex engineering.

Gold for KeltbrayKeltbray is one of just 13 companies to have

Pullman Ermator acquires Pullman-Holt’s HEPA vacuums

achieved Gold Status in the Fleet Operators Recognition Scheme run by Transport for London. The scheme aims to encourage freight operators to raise standards within their organisa-tions. Keltbray’s progression from silver to gold membership involved implementing a robust improvement plan, meeting core objectives, as well as continued provision of benchmark data and improvement thresholds. This accolade personifies Keltbray’s commitment and dedication in delivering a lawful, environmentally efficient and safe haulage operation throughout London. “We are proud to be only the 13th company out of the more than 3,000 registered FORS companies to achieve the Gold standard,” sais Keltbray group managing director John Price. “This clearly demonstrates our commitment and determination to deliver continuous improve-ments and environmental savings.”

Keltbray recently invested more than £5.5M (EUR6.36M) in its logistics, as part of a strategy to reduce its carbon footprint, improve safety and cost efficiency. This investment included 32 new Scania tipper vehicles, which comply with Euro 5 emission standards, and an agreement with Reflex for the hire of 196 commercial vehicles, including transit

and smaller vans. The van fleet includes 78 Volkswagen Blue Motion vehicles that have a range of energy-saving technologies, from automatic start/stop to low rolling resis-tance tyres, which are helping to reduce fuel consumption, emissions and running costs.

www.keltbray.com

Boels progression into dust suppressionThe European rental company, Boels Rental, has placed an order with Italy’s DF Ecology for 20 of their DF Smart portable dust suppression units and painted in their distinctive orange livery. DF Ecology is a sister organisation to lighting set manufacturer, Tower Light, and is based alongside the Tower Light manufacturing plant in Villanova d’Ardenghi near Milan, Italy.

Boels already has an extensive fleet of Tower Light lighting products. The DF Ecology range first came to their attention at the Bauma exhibition and decided to invest in DF Ecology products principally because of demands from their clients to provide environmental beneficial products. DF Ecology manufactures an extensive range of water based dust suppression products under the Dustfighter brand. Dust suppression on construction sites is becoming an important aspect to ensure the health of site workers.

The DF Smart is designed to provide workers with safe protection from airborne contaminates. It is ideally suited for contractors working with dust producing equipment, such as disc cutters, wall chasers and similar machines. The DF Smart produces a fine mist of water through a series

of high-pressure jets. The mist is then propelled onto the site by a powerful fan, rendering the area free from unhealthy and hazardous mate-rial. DF Ecology’s research suggests that the DF Smart will become an essential health and safety component with trades, such as builders, landscapers, light demolition contractors and recycling agencies.

The DF Smart operates from ordinary mains power, 230V 50 Hz 2.2KW and weighs just 77kg with wheels for easy transportation. It consumes water from 3.6 to 5.8litre/min at 2.5bar via a quick-release standard water hose connection.

Boels Rental has more than 300 loca-tions in the Netherlands, Belgium, Luxembourg, Germany, Austria, Czech Republic, Poland, Italy and Slovakia. It is regarded as one of the leading European rental firms.

www.dfecology.com

A first for a Terex Mac 25 pick and carry crane Koodaideri Contracting Services is Western Australia’s first fully indigenous owned lifting company. The company specializes in lifting, but also carries out other contracting work within the region’s rail and construction industries. “As we were just becoming established we didn’t want to go too big, too soon so we decided on a Terex Mac 25 pick and carry crane because it was the right size for our needs,” said KCS managing director Peter Todd. “With mobility as the primary requirement, we spent some time investigating the different cranes available in the market. We work on construction sites and in mines with rough tracks and we needed a crane with the maneuverability to get to any of the lifting sites.”

The Terex pick and carry crane range includes three models with lifting capacities ranging from 15t to 25t. The new Terex MAC 25 SL superlift counterweight system is designed to provide additional lifting capacity to all cur-rent Terex MAC 25 pick and carry cranes and can easily be retrofitted onto earlier models to increase their lifting potential.

36B-10L Namdong Industrial Complex, 610-9, Namchon-dong, Namdong-gu, Inchoen, 405-100, KoreaTEL. +82.32.820.3801 I FAX. +82.32.810.3456 I E-mail. [email protected]

TM

The bitterness of the copie’s low quality remains longer than the sweetness of low price.

The Original is Here

A wide range of ARIX technology products suit its perfor-mance to your desire at all times.

Products

ARIX Technology is to place diamond grits precisely in three dimensional patterns and to deliver the best performance to you in all cases.

ARIX Technology

(Control the space among diamond grits, wide (L0) or narrow (L1), as you want)

WX FX HX

GX Asphalt Blades Green Concrete & Prestressed

Ring Saw Blades Diamond WireCX

Get the Original, ARIX.Make you different !


Allied-Gator is now offering a new blade design exclusively for the MT mobile shear with the introduction of patent-pending serrated gator blades. Results from extensive field tests have shown serrated gator blades outlast tradi-

tional

s h e a r blades up to 50% longer when process-ing general scrap, and up to 90% longer when shearing steel wire and cable.

This new technology is an option, which is available to any

New Allied-Gator MT technology changes shearing

current Allied-Gator MT customer regardless of tool size, and no product modifications are

needed to the MT.“The serrations of the MT’s new

blades are designed to progres-sively pass through material like a saw blade rather than forcing the shear to chop through a large mass of material like an axe,” said,

Allied-Gator sales and marketing manager Mike Ramun. “This new blade design does not rely solely on sharp shear blade edges to achieve the cut. Instead of

a snipping effect, these blades generate a tearing action. This allows

the MT shear to grip and tear scrap materials, which is a far more ef-

ficient cutting method than the traditional

‘scissoring ef-fect’ utilized by

all other mobile

Rino is a new misting or fog system introduced by the Idrobase Group in its catalogue Spring-Summer 2013. Idrotech’s Rino line of misting systems, made in Italy by Idrobase, has the

Rino, the fog maker of solutions

possibility of being shaped to customers’ dif-ferent needs. It can be set at high-pressure up to 70bar and the low-pressure version at up to 15bar. It also has different flow rates, according to customers’ requirements.

It has 30 nozzles on one ring, a flow range of about 30m in absence of wind and a rotation angle up to 330° and elevation range from -25° to +35°. A remote control system allows operation from a distance of up to 150m.

Rino is ideal for several applications, such as dust suppression in mines, quarries and cement works, odour control in landfills and composting areas and cooling and reduction of temperature of wide outdoor areas, such as stadiums, trade shows and concerts.

www.idrobasegroup.com

shear blades.”As the MT’s dual moving shear jaws close

on structural steel, each serration systematically yields and tears scrap material along the blades’ cutting path. “This new method of shearing greatly reduces the overall wear and tear to the tool. It’s like perforating a sheet of paper as you tear it,” said Ramun.

Traditional blades force steel wire and cable to the throat of the jaw and cause uneven wear and damage to that specific blade area. Uneven blade wear has caused most recyclers to dread cutting steel wire and cable with their mobile shears. With serrated gator blades in the MT, the serrations trap steel wire and cable along the blades as the jaws close. This allows the blades to progressively rip and tear the cable apart on its way to the throat. The new technology is also effective in processing troublesome materials, like stainless steel and thin sheeting. The patent-pending Allied-Gator serrated gator blades are available for all 11 sizes of the MT Series multi-tool line.

www.alliedgator.com

D E M O L I T I O N & R E C Y C L I N G E Q U I P M E N T

HYDRARAM b.v.Meander 7NL 9231DB SURHUISTERVEENThe Netherlands

tel. +31 512-365981fax. +31 [email protected]

D E M O L I T I O N & R E C Y C L I N G E Q U I P M E N T D E M O L I T I O N & R E C Y C L I N G E Q U I P M E N T D E M O L I T I O N & R E C Y C L I N G E Q U I P M E N T

HFP SERIESHSG-N SERIES

MK SERIES

HCB SERIES

HRP SERIESHSS SERIESWW

W.H

YD

RA

RA

M.C

OM

FX SERIESHSB SERIES

DEALERS

WANTED!

Tractive AB I Gjutargatan 54 I 78170 Borlänge I SverigeTel: +46 (0)243 221155 I Fax: +46 (0)243 221180E-mail: [email protected] I www.pentruder.com

Please visit our homepage www.pentruder.com for more information about our products and contact

details to your Pentruder Sales Distributor.

With a Pentruder you can always expect HighestQuality, Reliability and Power.

Try a Pentruder You too - A Safe Investmentin equipment which is Built To Last!

All Pentruder Equipment is Made in Sweden. We produce precision parts in our own workshop, from the best materials, in state of the art production machines. With over 35 years of experience from designing transmissions and building concrete cutting equipment, we know what works and what the contractor needs.

Tractive gearbox inside!

4-step superstrong

gearbox


In the UK concrete cutting experts from D-Drill were called in to help restore a historic lock in the county of Berkshire and had to guard against environmen-tal damage. D-Drill was contracted by construction company Galliford Try to restore the reinforced concrete embankment of the Old Windsor Lock because it was starting to move and break-up. The lock, which was built in 1822, is maintained by the Environment Agency and it embarked on the restoration work as the embankment was becoming hazardous. D-Drill used diamond sawing equipment to form movement and expansion joints

to prevent future break-up of the concrete. The job was made more complicated as no residue could be allowed to seep into the water or into the ground. Special bunds were formed to contain any waste, which was subsequently removed with an industrial wet vacuum and disposed of into a sealed container.

The work was carried out dur-ing a three-week programme and was made all the more difficult by

rising waters during bad weather. “This was a job that called upon a range of skills and expertise of our team, not only the cutting method but also making the site safe and sealed,” said D-Drill representative Johnny Barber. “It was essential to maintain a public thoroughfare and, with that, had to ensure public safety. Also, members of our team had to carry out their work wearing life-jackets, which is something they are not used to.

“We worked closely with the Environment Agency and Galliford Try to ensure no waste made its way into the canal. The bund system enabled removal of all contained waste safely and efficiently. A further consideration was that no power supply was available on site, so we arranged to use a bunded 415V, 3 phase diesel generator.

“There were regular visits from the Environ-ment Agency to check the work and both they and the client, Galliford Try, were extremely happy with

Historic lock restored in the UK

arch demolition,” said Costain project director Mark Howard. “They have demonstrated their commitment to deliver, have a ‘can do’ attitude with a positive safety culture and display the right behaviour to succeed within a collaborative environment. Keltbray is a strong supporter of our zero tolerance approach to vehicle safety compli-ance, where we only allow delivery vehicles onto site that are fitted with safety equipment which reduces the risk to London’s cyclists.”

the way we went about the task and completed the job on time and within budget.”

www.d-drill.co.uk

Keltbray complete phase 1 demolition at London Bridge In the UK Keltbray has completed the first phase of the main demolition work at London Bridge Station. The work is part of Keltbray’s £25M contract for contractor Costain and Network Rail to create an improved and more spacious sta-tion with more frequent train services by 2018.

During the first phase Keltbray had over 100 people working on the demolition of three platforms and 12 existing brick viaducts. This work was carried out whilst causing minimal disruption to neighbours, passengers and allowed the continued operation of trains.

“Our biggest technical challenge was to ensure the stability of the remaining structures during the demolition process,” said Keltbray project manager Nick Smith. “We solved this through the installation of temporary works, including a gravity concrete retaining wall to sup-port the live platforms and tracks. Four machines worked simultaneously along a 150m long face to progressively demolish the arches in 1.5m strips. Maintaining this sequence was essential to avoid an uncontrolled collapse. During the works over 25,000t of material was removed from site with wagon movements peaking at over 150 loads/day.”

At London Bridge all parties on site are working to BS 11000 Collaborative Business Relationships. “Working to BS 11000 promotes team work and enabled us to work more demo-cratically with Costain, Network Rail and other parties to ensure we focused on mutual benefit and optimise efficiency,” said Smith.

“I am pleased to say that Keltbray has suc-cessfully completed the first stage of the complex

Demco Technic’s new servo drive Unicut diamond wire-saw has been successfully used on a bridge repair project in Switzerland. Four concrete abut-ments on the Klausenstrasse bridge project had to be cut into several pieces using the Unicut diamond wire saw. There were about 16 sections that had to be cut for removal, each measuring about 2m2. The average cutting performance was 15min/m2. In addition Demco Technic has launched its latest 16kW Captor concrete cutting wall saw, which can handle blades up to 1.2m

Demco Technic’s Unicut wire saw on the job

diameter. It can be combined with the Unicut wire saw to minimise investment.www.demco.ch

Quality diamond for hollow core slabs

Meijer Diamond Tools BV Loubergweg 34 NL-6961 EK Eerbeek The Netherlands Tel: +31 313 659555 Fax: +31 313 656854 Email: [email protected] Website: www.meijertools.nl

Quality diamond drill segments

PREMIUM★★★ CORE DRILLING SYSTEMSNEW GENERATION OF DRILL MOTORS

Powerful and highly productiveRobust and reliableUser friendly

A Company of the SWAROVSKI Groupwww.tyrolit.com

Issue 4 • July - August 2013 • PDi 21

Demolishing part of a hospital while emergency treatment and operations continue as normal is only possible with the right equipment. It must be quiet and low in vibration, like the Darda CC 420 concrete crusher on a Brokk demolition robot and the CC 320 on an electric mini-excavator.

Due to a change in floor use and the neces-sary renewal of the housing technology at the BG Trauma Centre in Frankfurt/Main, a four storey building section had to be demolished. While the interior walls were made of masonry, the exterior walls and the suspender beams and joists, ceilings and pillars were made of reinforced concrete. A soft demolition method was needed to allow the operation of the hospital to continue. Dust protection walls were used to

A successful hospital co-operation

isolate the emergency ward as well as various operating rooms from the demolition work.

Compact and strongIn the outside courtyard area a Takeuchi TB16 mini-excavator equipped with a Darda CC 320 hydraulic concrete crusher was used. As the machine was powered electrically neither noise nor exhaust fumes was an issue. The CC 320 can break up to 300mm thick reinforced concrete, as well as reinforcement up to 20mm. All Darda crushes generate their crushing power with a pressure converter that is independent of the carrier machine. This makes them very effective even on small machines. Despite their compact design they have a very large jaw opening that enables them to crush thick concrete.

No risk on thin floorsInside and on the top floors of the building a Brokk 160 demolition robot performed the work equipped with a Darda CC 420 concrete crusher. Brokk demolition robots are perfect for working inside buildings. With their electric-hydraulic drive train, they are emission-free and quiet, which are necessary requirements for the hospital project. The have low load bearing pressure which is an important factor when working on floors with limited load-bearing capacity. The Brokk 160 is compact and its track width can be reduced to 780mm, so that it fits through most doors. Its digital remote control allows the demolition robot to be operated from a safe distance. With

High performance demolition without noise with the CC 320 concrete crusher and an electric mini-excavator.

a breaking capacity of up to 38t, the Darda CC 420 breaks concrete up to 400mm thick while its reinforcement cutters are able to cut through steel to 28mm. The partial demolition of the university hospital went according to the schedule of the structural engineer. The chosen demoli-tion method proved to be advantageous as the reinforcement starter bars had to be preserved in many places. This would not have been possible with concrete saws, and the demolition costs would have been much higher. Using the two Darda concrete crushers on the carrier machines, contractor Bopp Bau was able to demolish ap-proximately 1,200m3 of material in four months.

www.darda.deThe Brokk 160 and the Darda CC 420 concrete crusher

When talking about demolition, the key word is “versatility”. From the crushing of structures

built in reinforced concrete to the cutting of ferrous materials and metal profiles, from the

separation to the movement of all types of inert materials: the MK multi-function crushers

assure you of the maximum efficiency and help you to attain your performance objectives.

Trevi Benne, the ultimate expression of power. www.trevibenne.it demolition | recycling | earthmoving


In the US Genesis Attachments has introduced four new XT Mobile Shear models, increasing the line to eight. The new GXT 445 and GXT 775 straight and rotator models join the GXT 555 and GXT 665 models introduced in April 2013. Shorter in length and height and lighter in weight, the GXT features a centre of gravity that is closer to the excavator, enabling the rotating

New Genesis XT Mobile Shears

models to mount on 21t to 35t excavators that previously could only carry smaller, less

powerful shears.“Interest in our new GXT mobile shears is high,” said Genesis business develop-ment director David Palvere. “Scrap processors and de-

molition contractors appreciate that the GXT fits on smaller carriers,

reducing their initial acquisition and hourly energy consumption costs.”

The GXT also features an apex, where most cutting is done, that is closer to the back of the jaws, improving material gathering and increasing cutting performance and efficiency while reducing maintenance. Additional GXT models are planned, and the complete line will fit 9t to 113t excavators.

www.genesisattachments.com

Polaris Private Equity, a leading Danish/Swedish private equity investor, has acquired HTC Sweden, the leading global developer and manufacturer of professional floor grind-ing systems and floor solutions. Polaris has acquired the company from Håkan and Gunn Thysell, who founded HTC in 1987 and have remained majority owners with a 60% stake. 3i Group and the former management, who held 40%, have also sold their interest in the

Polaris acquires HTCcompany to Polaris.

HTC, based in Söderköping, Sweden, has grown rapidly in recent years, driven by expansion into new geograpahic markets and the launch of new products. The company has 165 employees, and subsidiaries in the US, Germany, the UK and France, with coverage of an additional 60 countries through distribution partners. In 2012, the company generated revenues of SEK 370M (EUR42.34M).

HTC creates value for its customers through new methods for floor preparation and floor solutions, which are cheaper, sturdier, more environmentally friendly and longer last-ing compared to other options available. HTC’s strong focus on innovation has resulted in global market leadership within floor grinding machines, polished concrete and diamond cleaning systems.

Polaris will now focus on supporting HTC

in a growth strategy, based on organic and acquisitive expansion. The company will seek to consolidate its position in key areas, such as Europe and the US, as well as extending its offering into emerging markets, such as China and Brazil. Polaris will also continue the focus on innovation that has created strong customer loyalty and provided the company with a competitive advantage. ?

“We are delighted to have completed the buyout of HTC Sweden,” said Polaris partner Peter Ankerst. “This is a highly scalable busi-ness led by an impressive, visionary manage-ment team, which has shown its credentials in recent years, growing both revenues and margins, despite tough economic conditions. There are now exciting opportunities to trans-form HTC into a truly global leader in its field, and we look forward to helping the company deliver on these growth plans.”

“HTC has seen a strong expansion in re-cent years, with both the Twister and Hardware divisions contributing positively to growth and earnings,” said HTC chief executive officer Lars Landin. “Having Polaris as a new owner will give us wider access to the skills and capital resources required for the company to reap the benefits from the next stage of development, which includes increased penetration and several near term growth venues.”

Landin and the rest of the management team will also invest in HTC.

About Polaris Private EquityPolaris Private Equity is a Danish/Swedish private

equity fund, based in Copenhagen, focusing on

buy-out investments in well-established small and

midcap companies in Denmark and Sweden. Polaris

has EUR635M under management in two funds.

Polaris focuses on investments in companies with

development potential and a typical turnover of

EUR25-200M.

In real life there are no shortcuts to success. Our concrete equipment will however improve your chances of long and healthy customer relations. Together we can bring today’s demanding clients what they deserve: Reliable, efficient and user-friendly equipment developed for real life.

For further information please visit www.atlascopco.com

Concrete equipment for real life

AC_RentalConcrete_v2_1202.indd 1 2012-02-03 11:25

St. Petersburg’s famous Dvortsovy Bridge is under renovation and no percussive equipment was allowed. Only the gentle touch of concrete sawing and drilling equipment.

St. Petersburg is one of the most beautiful cities in Europe. Architectural ensembles, palaces, monuments, gardens and fountains - these glorious for all around the world masterpieces became essential symbols of the city, forming it’s the one and only image. Famous drawbridges, attracting thousands of tourists during the white nights, are taking a seat of honour among these symbols. The Dvortsovy Bridge is possibly the best known among them. It was built in 1916 and connects the Dvortsovaya embankment and the Vasilievsky island.

No percussive methods allowedAlthough there is a perception, even among profession-als, that previous structures were made to last for many years, the supporting machinery in the bridge’s granite piers at a depth of 3m below water needed replacing. The work was complicated because the new equipment was larger than the original and there should be not traffic disruption on the bridge. The main issue was a problem of space for the new design, which required the removal of 1,500t of granite. Also the dismantling works should not interfere with the activities of other

Gentle Repair of an Old Russian Bridge

The Dvortsovy Bridge was built in 1916 and connects the Dvortsovaya embankment and the Vasilievsky island.

contractors. The best solution was offered by the contractor Arasar, which had prior experience on the reconstruction of the Blagoveshchensky and Anichkov bridges. The company offered the solution of using diamond cutting technology.

Any kind of percussive dismantling would be inef-fective and dangerous. Vibrations and micro cracks, which inevitably arise when operating a pneumatic tool, would cause problems, as the thickness of pier wall left is only 300mm in the upper part. There was a need to guarantee high accuracy and an absence of deformation, which could be provided by diamond cutting.

Difficult circumstancesMilling of a 10m3 granite segment weighing 27t was performed in several stages. First, two vertical holes 250mm diameter and 2m deep were drilled with diamond drilling systems. These holes were used for the roller submersible tensioners of the cable cutting system used for vertical cutting. Then with two similar vertical cuts and the final horizontal one, the granite block was lifted out by a crane.

Despite the proven technology, some adjustments of progress were made due to the capricious winter weather and a bomb that exploded near one of piers during the Great Patriotic war. Granite blocks have crumbled and cracked and even leaks have occurred. Periodically, when pumps could not cope with the icy water, the dismantling work was suspended and equipment temporarily removed. Drilling on the pier was difficult due to the crushed granite and removing sand from the holes.

Despite all the difficulties, Arasar completed the works on time and the client had the best solution for the task as diamond cutting technology proved its effectiveness on one of St. Petersburg’s most famous structures.



Gentle Repair of an Old Russian Bridge

OilQuick - for efficient demolition!

• Reduce the number of machines on the site • Reduced transport costs• Always the right attachment for the job • Eliminates oil spills• Lightning fast change of hydraulic attachments

• No staff around the machine during tool changes• Improved safety • Protected hose run• Increased productivity • Increased profitability

www.oilquick.com

oilquick-annons-eng.indd 1 2012-02-29 15:01:17


This year work tool manufac-

turers for the demolition at-

tachment industry have deliv-

ered a plethora of new shears,

crushers and pulverisers that

are stronger, more productive

and cost efficient than their

predecessors. PDi’s Andrei

Bushmarin reports.

The demolition attachment market is growing, albeit at a much slower pace than the players would wish. The annual amount of demoli-tion projects oscillates around the same figures, but the number of suppliers is steadily increasing competition in the sector. In terms of consumption, North America holds on to its leading position, closely followed by Central Europe and Scandinavia. Among emerging economies, South America and Africa posted the highest growth rates. Eastern Europe, which is currently underperforming, is expected to resume growth in the short-to-mid term. As the southern European market is virtually non-existent, Italian and Spanish manufacturers are hanging on by their fingernails, with their chances of survival depend-ing solely on international sales.

There have not been any groundbreaking in-novations, but the general trend is that attachments are getting increasingly larger and more efficient,

while generating less noise and dust. According to US based Genesis Attachments marketing manager Amy Burmeister, high performance, ease of maintenance and noise and dust suppression systems are the key requirements that professional contractors require. The sales and marketing director of Finnish company Ramtec, Benjami Pitkasalo, said that users are becoming increasingly harder to satisfy, requiring more features on their tools while trying to drive the price down. Young demolition companies tend to go for cheaper Korean or Chinese products or rent their attachments. With most respondents believing that the global demolition market is slowly gaining momentum, the outlook for late 2013 and early 2014 is cautiously positive.

Genesis extends range of GXT mobile shears

Genesis Attachments has added four new models to its existing GXT line of mobile shears, thus extending it to eight. The new GXT 445 and GXT 775 straight and rotator models join the GXT 555 and GXT 665 shears launched in April 2013. Shorter in length and height

and lighter in weight, the GXT shears have their centre of

gravity closer to the excava-

tor, en-

abling the rotating models to be mounted on

20t to 35t excavators that previously could only carry less powerful shears. The GXT range has the cutting apex moved closer to the back of the jaws, which improves material gathering and increases cutting performance while reducing maintenance. More GXT models are already in the pipeline, and the complete range will fit 10t to 110t carriers.

www.genesisattachments.com

Ramtec upgrades Robi crusher-grapple Ramtec has upgraded the Robi crusher grapple CG35R with a high-speed valve. Weighing in at 2.6t, this model

New Attachments: “Shear” Force and “Crusher” Power.

is designed to fit 20t to 40t excavators. The most im-portant feature of the CG35R is its ability to separate material after crushing. According to the company, the combination of the wide jaws and crushing force allows users to perform demolition tasks with the CG35R much faster and efficiently than with a conventional cutter crusher.

www.ramtec.fi

Demarec to adjust tools to market requirements

Demarec, a specialist manufacturer from the Netherlands, is going to overhaul its range of

pulverisers, demolition shears and Mutli-Quick processors with a view to adapting them to higher working pressure. The maximum pres-sure will be raised from 350bar to 380bar, which

will result in a 10% increase in capacity. The overhaul has been prompted by the increasing number

of excavators that have hydraulic systems operating at a pressure of 380bar. Demapower system tools and those with standard cylinders will undergo the upgrade. In line with the trend towards larger attachments, Demarec has delivered its first 9t scrap shear and is currently working on another two models, weighing 13t and 16t. These will be available with and without the 360° rotation mechanism. Also new from are two grab models, the DRG 25 and 27. They are currently only available in the Benelux market, but export versions will follow shortly. The DRG-25, weighing 1.45t is intended for 18t to 28t

OilQuick - for efficient demolition!

• Reduce the number of machines on the site • Reduced transport costs• Always the right attachment for the job • Eliminates oil spills• Lightning fast change of hydraulic attachments

• No staff around the machine during tool changes• Improved safety • Protected hose run• Increased productivity • Increased profitability

www.oilquick.com

oilquick-annons-eng.indd 1 2012-02-29 15:01:17

Get the ultimate up-close look at the future of construction.Registration is now open for the show that offers an immense unveiling of all the newest equipment, technology and product breakthroughs in construction. From earthshaking big iron to groundbreaking innovations you don’t even know exist, it’s all assembled in one place to help you work smarter.

Register now at www.conexpoconagg.com to save over 30%!

REGISTER NOW TO SEE WHAT’S NEWREGISTER NOW TO SEE WHAT’S NEWREGISTER NOW TO SEE WHAT’S NEW

March 4-8, 2014 | Las Vegas conVention center | Las Vegas, Usa Co-located with ®2014

using the same housing and a choice of six jaw sets. Depending on the task at hand, the operator can change between concrete cutter, demolition, pulveriser, shears, universal, and tank shears. The new multi-processors come complete with a 360° rotation mechanism. Due to a new jaw locking system, jaw changeover takes only about 10min instead of usual 25min. Cutting and crushing performance has been improved, thanks to a built-in hydraulic SpeedBooster, which automati-

cally kicks in whenever the tool meets any resistance. With the redesigned booster, a speed valve and new smaller cylinder, jaw closing force has been increased by 6% and the open and close cycle times have been almost halved. These innovations have boosted the new multi-processors’ steel cutting performance by 10% and concrete breaking by 50%. According to Cat, more models will be added to the multi-processor range at a later stage.

www.cat.com

machines. The larger DRG-27 fits 20t to 30t carriers. These grabs are equipped with a parallel linkage system, new oil distributor and two heavy-duty rotation motors.

www.demarec.com

Caterpillar releases new multi-processor line

Cat Work Tools has released the new multi-processor line MP300 for excavators. The MP318 and MP324 models can handle virtually any demolition job by

FRD unveils new crusher line Furukawa Rock Drill premiered at Bauma its V series of heavy-duty crushers, covering a wide range of demoli-tion and recycling applications. The new tools feature the reverse mounted hydraulic cylinder, equipped with a speed valve as standard. The series includes VX primary crusher, VS secondary crusher, VR scrap shears, VM multipurpose crusher and V multiple use crusher with exchangeable jaw sets. All models are complete with



A KINSHOFER COMPANY

Demarec • Demolition and Recycling Equipment BV

demarec.com

Den Hoek 10 • 5845 EL St. Anthonis (NL) • Tel. +31(0)485 442300Fax +31(0)485 442120 • E-mail: [email protected]

Multi-QuickProcessors

StaticPulverisers

Demolition andSorting Grabs

DedicatedDemolition Line

Polyp Grabs Rail-Cutter

Trendsetter in Demolition and Recycling Equipment!

steel blades for cutting reinforcement. The V-system is available in nine sizes, fitting 3.5t to 70t excavators. The double cylinder construction ensures a very wide jaw opening for its weight class. Thanks to the possibility to choose between six different jaw sets, the V-system is capable of solving almost any demolition or material-handling task.

www.frd.eu

Atlas Copco introduces mobile shear jaws

Atlas Copco used Bauma to show-case a new jaw version, which turns its CC 3300 Combi Cutter into mobile shears. Designed for cutting steel struc-tures such as profiles, beams,

frames and rebars, these new jaws will be handy on demoli-

tion and recycling sites as well as scrap yards. The CC

3300 is modelled on Atlas Copco hydraulic combi cutters, featuring two moveable jaws and two lifting cylinders. One of its most distinctive

features is the central pin, which holds both

cutter jaws together. This solution reduces the time needed to change the jaws by up to 75%, compared to

the concept of separately supported jaws. Thanks to the coupling and positioning system, which holds both jaws together, the jaws can be installed and removed as one unit. The cutter blades are reversible and exchange-able, which also saves time onsite. The mobile shear jaws version is the latest addition to the universal jaw version, steel-cutting jaws and box shape jaws, which are already available for the CC 3300.

www.atlascopco.com

Wimmer ex-pands Topcut

range Austria-based Wim-mer has been devel-oping and improving the Topcut line of demolition shears for about 15 years now. The universal Topcut U, designed for a wide range of applications, was the first in the line, joined later by another four jaw versions. Today “Topcut” shears are available in four weight classes, fitting 16 to 75 t excavators. Just recently, Wimmer has added another model, the 700U, to the Topcut range. The new shears come complete with two cylinders and a speed valve for high-performance demolition. It also boasts a number of features that guarantee long and reliable operation in harsh demoli-tion environment. One involves special covers protecting the cylinder surfaces. Secondly, the oil lines are routed inside the cylinders to prevent them from damage by debris. And the last but not least, the shears are designed in a way that ensures that no screws or bolts are exposed to the breaking forces. The jaw design has been optimized so that users

could easily change and replace its parts right on the site.

www.wimmer.info

Lehnhoff to launch 15 model grab line

This autumn Germany-based Lehnhoff will introduce a 15 model range of sorting grabs, fitting 1t to

100t carrier machines. The new grabs feature innovative cylinder technology, which reduces by 50% the force transmitted onto the housing. This solution enables

more compact and lightweight construction. Two hydraulic motors built into the housing provide 360° rotation. The range is primarily geared towards heavy-

duty applications, with all models boasting robust and sturdy construction. Parts subject to regular

wear and tear, such as the cutting edge made of 500 HB steel, are readily changeable. The grabs are available with either the Lehnhoff patented quick-coupling system or with a

mounting bracket for other types of quick couplers.

www.lehnhoff.de Compact crusher from Mantovanibenne

Italian company Mantovanibenne has expanded its at-tachment range with the CRH440 crusher. Weighing

DEMCO TECHNIC AGGewerbepark Oholten 23 • CH-5703 Seon, Switzerland Phone: +41 62 769 6220 • [email protected] • www.demco.ch

5:0 for ServoDrive by Demco Technic AG• light and economical • low maintenance costs • highest torque and performance• on drive for all devices• wired- & wireless control


290kg, this compact, powerful tool is designed for 3t to 6t carriers. Thanks to its weight and dimensions, the CRH440 is a good option for jobs in confined areas. Jaw closing force is controlled by a booster system, which automatically increases the power when it meets any resistance. The RCO** system protects the crusher’s hydraulics from pressure surge. Jaw opening and closing cycle is 1.1 to 2.4s, reaching 24 complete cycles/min. The crusher’s low weight and compact dimensions serve to increase the excavator’s manoeuvrability onsite. The crusher comes with different types of interchangeable

tips for the operator to choose from, depending on the job conditions.

www.mantovanibenne.com

Trevi Benne equips premium line with impact booster

Another Italian company Trevi Benne used Bauma to debut a new premium line of demolition attachments equipped with a power multiplying device called impact booster. This is an integrated hydraulic unit that sharply increases the excavator’s operating pressure, when it is no longer enough to crack the material being demolished. Thanks to the impact booster, operating pressure can be raised from the pre-set 250bar to a peak of 750bar within seconds. The advantages of this solution are reduced stress on the excavator and lower fuel consumption, since most of the time the machine operates at 250bar, instead of the conventional 350bar, and increases the pressure only when it is needed. The booster also helps increase crushing power and operating speed, which results in the reduction of the open-close cycle to just 3.5s. The premium line includes the primary demolition crusher HC Premium, the multi-kit processor MK Premium,

the rotating pulveriser FR Premium and the secondary demolition pulveriser F Premium.

www.trevibenne.it

MB extends product range This year Vicenza-based Meccanica Breganzese, one of the world’s trendsetters in screening and crushing buckets, has expanded its product portfolio with the launch of two new models. Having been designed for 4t to 8t carriers, both newcomers, the MB-S10 screen-ing bucket and MB-C50 crusher bucket, belong in the smaller end of their respective ranges. With a weight of 445kg and capacity of 0.6m3, the MB-S10 is built along the same lines as other MB screening buckets. Compact and manoeuvrable, it can even be used for gardening work. The MB-C50 is the smallest unit in the MB crusher range. Weighing 750kg, it has a loading volume of 0.25m3 and features the patented double jaw movement technology.

www.mbcrusher.com

CP expands RX line of heavy breakers Chicago Pneumatic has introduced five new models

starts only when the working tool is depressed, and is recommended when working on solid ground, large rocks, hard concrete and trenching.

The second mode is EasyPower Plus, which allows operators to switch to high impact rate with normal impact en-ergy. In this mode the breaker starts even when the working tool is not depressed, and is recommended when working in unstable ground, small rocks, and thin concrete sur-faces and when working in hori-zontal or overhead positions.

Common to all RX breakers is the power boost feature, designed to achieve greater breaking perfor-mance in tough applications with-

out requiring a d d i t i o n a l h y d r a u l i c input . The e n h a n c e d p e r c u s s i v e performance i s achieved by reu s ing the recoil en-ergy. As with all breakers

in the RX series, the new line-up features the en-ergy efficient gas/oil hybrid tech-nology and an internal control valve for increased efficiency.

www.cp.com

to its RX line of heavy break-ers, the RX26, RX30, RX38, RX46 and RX 54. Ranging in weight from 1.8t to 4.2t they fit 20t to 70t carri-ers. The standout feature of the new RX breakers is the power control plus valve. It is a combined stroke length

and start-up mode swi t ch ing va lve

tha t opera tor s can change in the field without opening the hydraulic circuit. The valve enables breaker operators to choose between two different operation modes to optimise productivity for different applications.

The first mode is PowerStop Plus, which allows operators to switch the breaker to high impact energy with nor-

mal impact rate. In this mode, the breaker

SPRAYCANN

ON

.COM

MB DUSTCONTROL B.V. Netherlands T +31 (0)71-5610096

WE BEAT THE DUST!

Outside Area: F8

Standnumber: N831/4

T +31 (0) 38 385 5471 | E-MAIL [email protected] | I WWW.ROTAR.COM

Your Attachment Supplier

Rotar Polyp Grab (RPG)

Your partner in Recycling!

Rotar Scrap Shear (RSS)

Lehnhoff Hartstahl GmbH & Co. KG 76534 Baden-Baden | Germany Telefon +49 7223-966 [email protected]

The new demolition and sorting grabs by Lehnhoff. More information at www.lehnhoff.com

A GrippinG StoryA GrippinG StoryThe new demolition and sorting grabs by Lehnhoff. More information at www.lehnhoff.com

Anz_Sortiergreifer_4c_92x128mm_Englisch.indd 1 23.08.13 15:07

DYNASET Oy | www.dynaset.com | [email protected] | Tel. +358 3 3488 200

WORKS FOR EVERY MACHINE

COMPACT | POWERFUL | RELIABLE

Hydraulic generatorsVariable hydraulic generatorsHydraulic weldersHydraulic magnet generatorsHydraulic magnets

Hydraulic high pressure water pumpsHydraulic power washersHydraulic drilling fluid pumpsStreet washing unitsPipe cleaning unitsDust suppressionSubmersible pumps

Hydraulic air compressors

Installation valvesHydraulic PTO and power unitsHydraulic winches etc.

ELECTRICITY HIGH PRESSURE WATER PUMPS

COMPRESSED AIR

HYDRAULIC KNOW-HOW

Upcoming trade fairs:

11.-12.9. Finland

18.-21.9. South Africa

1.-3.10. USA


With a very weak domestic Italian market and a scattered European market Italian at-tachment manufacturer Inde-co, based in Bari, put its trust in North and South America. About 40% of the company’s sales are shipped to North America.

Being an Italian manufacturer dependent on the Italian market is currently a very difficult task. The Italian market is experiencing one of its worst reces-

Putting trust in North and South America

sions in decades. If a manufacturer wants to see any chances of survival export is the solution. “I am seriously very worried and the bad market situation is not limited to Italy,” said Indeco managing direc-tor Michele Vitulano. “All surrounding markets like Spain, Greece and other smaller states are really bad too. Middle East countries that used to be rather good have become more difficult. One reason is the strong competition from China and Korea.”

About 40% shipped to North AmericaIndeco puts its trust in some of the more northern European markets and, in particular, North and South America. About 40% of the sales are in North America, including about10% in Mexico. Sales in South America represent10% of the company’s busi-ness, and is increasing.

Europe accounts for about 25% of Indeco’s business, while Africa, the fastest growing market, is averaging between 10% and 15%. The remaining

25% is mostly divided between the domestic market in Italy and rest of the world.

Indeco has owned a US subsidiary in Milford, Connecticut for more than a decade, and operates four service centres across the country. A new ser-vice centre recently opened in Portland, Oregon. Two years ago, Indeco established Indeco Mexico in Mexico City which also supports neighbouring countries to the south.

Vitulano believes that technicians are some-times more important to focus on then sales people. Technical advice and professional support is what the users are asking for. Not that he thinks that his products sells for itself, but the sales work is left to about 30 dealers that sell Indeco equipment in the US, Canada, and Mexico.

A complex but growing South American market

South America is a prioritized market sector for

“I am seriously very worried over the market situation in Europe. But we are doing very good in North and South America,” said Indeco Manag-ing Director Michele Vitulano.


Indeco, and the company has deal-ers in most countries. “But each country in South America is unique,” said Vitulano. “In Eu-

rope countries can be different in some ways but the basics of

doing business is the same. “In South America each

country is a unique and quite complex

project and much of the complex-

ity is related to the dif-

f i c u l t im-

port legislations.” Argentina has

become a very strong market for Indeco, with a dealer lo-cated in Buenos

Aires and enjoys and about 60%

of the market . However, companies need an import certificate for every imported product, something that can take up to two months to secure. Venezuela has a similar requirement.

Brazil is different. The import certificate is not a problem to get but the country’s import duty is still horrendous, though it has been lowered over

the last decade. However, it also takes a very long time to get products through customs.

“Even though we struggle with these practical and bureaucratic obstacles South

America is a very interesting continent right now, which in some cases is booming,” said Vitu-

lano. “We have very good sales in Argentina, Brazil, Venezuela, Colombia, and Chile at the moment.”

New productsThe focus in Indeco’s product development and product range is still hydraulic breakers. But while the company offers a wide variety of breakers, the company has devoted the past decade to widening the range with other types of demolition and recycling attachments like concrete cutters, pulverizers, sorting grabs and steel shears. In the spring Indeco launched several new products.

The new ISS 10-20, small on size, big on performance

The new ISS 10-20 is the smallest shear in Indeco’s range designed for 10t excavators. Like Indeco’s other shears, the latest addition will also have outstanding cutting force due to special design features. They include a dual-profile piercing tip system, four fully reversible and interchangeable steel blades, a dual blade guide system, and deep jaw and long blades, and a cutting register adjustment system.

The benefits of Indeco hydraulic shears include a regeneration valve that accelerates no-load move-

ment of the jaw, thus speeding up opening and closing. A heavy-duty pivot group keeps the jaws aligned and prevents buckling, while a large, hydraulic cylinder provides force to deal with any type of working conditions.

The Indeco IBS pedestal boom system

Indeco has also launched a new series of products to meet customers’ specific require-

ments and individual needs. Produced and marketed a few years ago by Indeco North America and Indeco Australia, the Indeco

IBS pedestal boom secondary breaking system looks destined to make an impact on many other markets, having already proven to save time and money in many a quarry and mine. Mounted over the mouth of a primary crusher, the systems reduce

bridged and oversized material that slows down crushing operations.

The new line of Indeco IHC Series-R rotating compactors has been created to help contractors work even under the toughest conditions. These rotating compactors have continuous 360° rotation. The hydraulic fittings are in line with the carrier boom, the hydraulic rotation motor is easy to access and the upper attachment plate is reinforced.

New line of rotating compactorsThe IHC compactors replace traditional hand-held equipment and in slope applications, eliminate self-propelled rollers. Indeco compactors, mounted onto a carrier boom, are hydraulically driven with an oil-bath bearing system. This gives a balanced design of compaction force and vibration speed, achieving the depth penetration needed to reduce air voids and move more material faster.

www.indeco.it

BrunnerLay&

“Quality First” since 1882

PAVING BREAKERS DEMOLITION TOOLS ROCK DRILLING

Whether you need to break a sidewalk or the side of a mountain, we’ve got a durable, dependable solution for you. If you need tools for construction,

Call (800) 872-6899 or visit BrunnerLay.com

Your

forcomplete source

BREAKING rock.

BAIER – the fi ne art of coring

Try for yourself ...

Maschinenfabrik OTTO BAIER GmbHD - 71679 Asperg . www.baier-tools.comMade in Germany since 1938

. NO WATER – NO MESS

. PRECISE AND DUST FREE

. SAVES TIME AND MONEY

Dry core drilling in concrete

with re-bars

... see the future of

dry drilling

www.baier-tools.com

with BAIER-TITANIUM core drills


New Pan American Demolition MagazineIn July a new demolition maga-zine Professional Demolition Americas was launched spe-cifically for the North, Central and South American markets. PDa will be produced entirely in the US.

PDa is published by Riverbends Publishing, which operates within PDi’s publishing company SCOP. PDa’s editorial staff, led by well known US industry correspondent Jim Parsons, is experienced in all facets of the demolition industry, and the issues that are of the greatest interest to contractors, equipment manufactur-ers and customers. Parsons will be supported by another established industry correspondent Luiz Carlos Beraldo, covering the South American market and will be based in Curitiba, Brazil.

“I am very exited about this new project. PDa is very similar to its well established sister magazine PDi and will cover the same industry sectors like demolition, concrete sawing and drilling, concrete floor grinding and polishing, recycling, hydrodemolition, industrial clean-ing and soil remediation,” said PDa and PDi editor-in-chief Jan Hermansson.

Two continents on the goThough not fully recovered from the recession or insu-lated from Europe’s economic difficulties, the economies of the Western Hemisphere are, on the whole, on the rise. New and postponed projects alike are moving forward. A new sector is rapidly evolving around the growing popularity of concrete flooring, and yet another product innovation seems to arrive nearly every day.

PDa will strive to provide the same degree of qual-ity and up-to-the-minute coverage, as PDi, but focused exclusively on news and trends driving this dynamic industry in North, Central and South America.

In the US several states have implemented new funding strategies to jump start their highway and bridge restoration programmes, while Brazil is bustling with a variety of projects leading up to next year’s football World Cup and the 2016 Summer Olympics.

Contractors are shifting their energies from simple survival to finding ways to improve their productivity and competitiveness, attract and retain labour, comply

with environmental and health and safety regulations, and make the wisest investment in equipment and other resources.

And, few jobs can be con-sidered routine in demolition work these days, as mega-projects, site constraints and access issues continue to challenge contractors’ pro-fessional skills and innova-tion. All of this, and more, will be coming to readers in the first and future issues of PDa. “We’re confident that our readers will like what they see, and want to learn more,” said Jim Parsons.

Multi lingual to come

PDa will have the biggest circulation in the US, Canada and Mexico. But the magazine will be sent extensively to contractors in Brazil, Argentina, Chile , Colom-bia, Bolivia and Venezuela. All together profes-sional contractors in about 35 coun-tries in North and South America will receive PDa. The magazine will be published quarterly and circulation is aimed at about 20,000 copies.

The plan is also to make PDa multi-lingual in English, Spanish and Portuguese. But it has not yet been decided if there will be summaries of selected articles in Spanish and Portuguese in the initial English issues or if there will be completely separate issues in Spanish and Portuguese. Another option under consideration is to publish Spanish and Portuguese versions on the PDa website, www.pdamericas.com for downloading or reading online.

Valuable and strong supporters“To start a new magazine demands financial endurance

over a number of years. And I speak from my own experience with PDi magazine,” said Hermansson. “To deliver a quality product that will be appreciated by readers takes a lot of hard work and energy. You

need dedicated and professional staff and you need to make sure

that each is-sue actually reaches the right audi-ence, which i s e s s en t i a l for our valu-able advertis-e r s . We a r e very fortunate to have worked with many good and loyal clients over the years. To launch and produce PDi and now PDa is a close co-operation with our advertisers and also our readers. We have much to thank them for.

“ I h a ve h i g h hopes for PDa and I have wanted to pub-lish a demolition mag-azine for the North, Centra l and South American markets for a

number of years. We hope the time is right, as we know that business is picking up in the Americas. We also launched PDi at a very difficult time and it has worked well.”

PDa will be sent to professionals in North, Central and South America offering services or selling equip-ment for demolition, concrete sawing and drilling, recycling, concrete floor grinding and polishing, hy-drodemolition, handling hazardous waste, industrial cleaning, handling dust and concrete slurry and related areas. Anyone that would like to subscribe to the new magazine please visit the website www.pdamericas.com for more information.

www.pdamericas.com

Alois Wimmer established Wimmer Hartstahl in 1984 in Thalgau, a small hamlet of Salzburg. A mechanical engineer by education, Wimmer focused on manufacturing digging tools and repairing excavator buckets.

Discovering true identity In the first year the company had just four employees, including the founder. But in 1985, Wimmer happened upon an idea that would propel the company into a new area and help to discover its true identity. The idea was to create a hydraulic quick coupler that would relieve operators of the necessity to leave the cab to change the work tools. At the time mechanical couplers designed by Toni Verachtert were common, but they still required the operator to get out of the cab and do a fair amount of manual work. Automatic devices did not exist, and that was the niche Wimmer plunged into. That was the birth of the A-Lock concept that would define Wimmer’s future for years to come. Business skyrocketed, and the company moved into new bigger premises in Thalgau and took on another 30 personnel.

Golden period The late 1980s and 1990s were a boom time for Wimmer. The A-Lock concept proved a tremendous success, on the back of which the company grew rapidly. In 1989, Wimmer branched out by registering a daughter company Wimmer Felstechnik, whose products included tunnelling equipment and demoli-tion attachments. Four years later, Wimmer had built up a new manufacturing facility in the Czech Republic. Originally called Budwqeis Felstechnik, it was later renamed Wimmer International CZ. In the mid-1980s, Wimmer set its sights on the North American market. The company opened a sales office in Montreal, Canada in 1986, which became Wimmer’s operational base on the East Coast.

The Oilmatic era As the new millennium dawned, Wimmer kept on developing at a breathtaking speed. In 2001, the manufacturer expanded its facilities in Thalgau and built a training centre for em-ployees, customers and dealers. 2004 saw another milestone for Wimmer, when it developed the A-Lock Oilmatic, a fully automatic quick-coupling system with the tool recognition option. The company also built a new hall on its premises in Thalgau for rented equipment and a service department. The following year the company expanded its manufacturing facility in Budweis, doubling the capacity of the Czech plant. In 2006 Wimmer won an award for the best family-owned employer in the Salzburg area. Although affected, just like anybody else, by the 2008-09 recession, Wimmer managed to keep all the staff and eventually finished the decade on a high note by launching the next generation of fully automatic devices Oilmaxx, and developing a range of tilt and rotating units for excavators the Tiltator.

Father and sonThe demolition industry is still relatively young, with most companies going through their first generational change. In-terestingly, if founding fathers more often than not tend to be inventors and engineers, their sons and daughters are usually trained as managers and business administrators. It is only

Quick Couplers with Family TraditionThe demolition indus-try is all about family and as a guesstimate family-owned com-panies account for at least 90% of all mar-ket players, suppliers and contractors alike. Austria-based Wimmer Hartstahl is a prime example of a family business. PDi’s Andrei Bushmarin reports.

The founder, Alois Wimmer.

Left: The Wimmer team in early days. Sitting on Alois Wimmer’s lap is his son and the other CEO in the future Andreas Wimmer.

Andreas Wimmer (left) with Austrian scientist Dr. Clemens Sedmak.


Quick Couplers with Family Tradition

partly true of his son and the other chief executive officer of the company Andreas Wimmer. Having graduated from the same High Technical College of Salzburg as his father, he does have

an engineering training. But Andreas also studied management and business administration in Salzburg and Canada, and this is what he does now for the company.

Much more than just quick couplers Although quick couplers are the product that Wimmer is most known for, its range of solutions is far from being limited by it. Wimmer is a company that can solve any of its customers’ problems, and to be able to do this, a supplier must have a full range of tools available. As far as demolition and recycling is concerned, Wimmer offers attachments for primary and sec-ondary applications, including hydraulic breakers, shears and grapples. Demolition tools are manufactured at the Thalgau fa-cility and excavator buckets and tilt and rotating units, are made in the Czech Republic. Wimmer currently has 96 employees, of which 65 are engaged in production. Since customized and tailor-made products account for a significant part of the Wimmer catalogue, the company keeps a relatively big research and development department of six engineers. A brainchild of Alois Wimmer, the department has been under the founder’s supervision since day one. The average turnover oscillates at some EUR14M/year, with export accounting for around 45%. However, in the demolition attachment business, the situation is reverse with 55% of the output going for export, while the remaining 45% is sold domestically. As Wimmer products are already well known in all German-speaking countries, France, the UK and North America, the company has now set a goal to make the Wimmer brand recognisable beyond these markets. It might prove difficult in some countries, because Wimmer products are not cheap. In line with its motto “quality without compromise”, the manufacturer uses only high-quality parts and components for its attachments, and the resulting product is a durable and high-performing tool with an accordingly high price tag. But as Andreas Wimmer explains, “You can compare our products to a Savile Row suit. It might be expensive, but it is going to suit you on any occasion.”

www.wimmer.info Below the Wimmer facilities in Thalgau with the company’s sales team in the four ground.

Oilmaxx quick coupler installed on a 26t Volvo excavator.

Oilmaxx 550 on a demolition site. Below the Wimmer tiltator.

Oilmaxx V8 in action.

Oilmaxx V8 in the Wimmer stand at Bauma 2013.


The problem of illegal dump-ing by small demolition opera-tors has resulted in Cape Town adopting a zero rate for clean builders’ rubble, which became effective on 1 July 2013. Clean builders’ rubble disposed of at council facilities is now free, subject to some individual site limitations and a general cap in vehicle carrying capacity of 1.5t. Jessica Hannah reports.

Meanwhile, there has been challenges to work out an incentive scheme for companies that recycle building rubble. “When undertaking a demolition the company makes every effort to be environment-friendly,” says

Ross Demolition owner Robert Ross. “Many building projects apply to be ‘Green’ with strict environmental rules to adhere to, including in the demolition phase.”

Generally the mainstream South African demolition industry makes every effort to recycle as much of a building or structure as possible. There are outlets where recoverable material is sold, concrete is crushed

for reuse as sub-base or aggregate. However, environ-mental efforts have also increased costs as strict controls have to be kept in place, additional staff employed and environmentalist fees are costly. Ross says that, on the other hand, it has become a way of life. He believes that there still needs to be a huge incentive programme as a company that is environmentally friendly, as far as is possible, is still paying exorbitant fees to do so.

Draco Demolition managing member, Teddy Habib, adds that the accent these days is on ‘green’ demolition. “There are no green rules or regulations regarding demolition at the moment, but this will come, and by adopting these practices on everything we do, we aim to be fully compliant before this becomes a legal requirement,” said Habib.

Rubble makes above average aggregateThe demolition of cooling towers in Cape Town has made a substantial contribution to reducing the carbon footprint of concrete masonry and paving block manu-facturer in the heart of the city. The Athlone cooling

towers yielded roughly 16,000m3 of rubble, equivalent to 20,000t of concrete, which provided Cape Brick with enough raw material to last roughly four months. South Africa’s Concrete Manufacturers Association said that considerably less embodied energy is required to produce concrete masonry units using recycled concrete than when using freshly quarried sand and stone aggregates. Embodied energy is defined as the energy consumed in the manufacture and transporta-tion of construction materials and is measured in megajoules/kg. The use of recycled material does not mean that product quality suffers as its properties are equivalent to quarried materials. It offers comparative com-pressive strengths and is a truly green material which is also fully recyclable.

Cape Brick managing director, Anthony Gracie, said that it takes approximately half a megajoule to produce a kilogram of masonry or paving block using recycled material, whereas close on a full megajoule is typically required to produce the same product using original material. “The energy saved in producing 40,000 ‘green’ bricks, would provide 90 houses with enough electricity for a month,” said Gracie.

Cape Brick began using recycled material by accident. “At our current site we had a consider-able stockpile of our own waste, which needed to be dumped. Instead of spending a vast amount to remove the material off-site we decided to invest in a small crusher and incorporate the rubble into our production run,” said Gracie. “The venture proved very successful and when the material was expended, we started sourcing rubble from local demolishers. “Before being delivered to us rubble is hydraulically hammered to about 500mm at the demolition site. After an initial crushing any steel or non-ferrous metals are separated from the rubble and sold to scrap merchants. The remaining material is then sieved, filtered and re-crushed yielding the original sand and stone that was used in the composition of the original concrete.”

Cape Town tackles rubble dumping

Illegal Dumping: Waste disposal has been increased drastically rendering many demolition projects unsustainable, and leading to a scourge of illegal dumping.

The South African demolition industry makes every effort to recycle as much of a building/s or structure as pos-sible.

Brokk establishes sales company in SwitzerlandBrokk, the world’s leading manufacturer of remote controlled demolition machines, strengthens its presence in Switzerland by establishing a new subsidiary, Brokk Switzerland. Brokk makes this long- term investment in the Swiss market after many years of partnering with a local distributor. Switzerland is a market with a long and successful Brokk history. The introduction of the Brokk remotely controlled demolition concept in Switzerland dates all the way back to the 1980s, and it has since continued to be a lead-ing edge Brokk market. The establishment of Brokk Switzerland represents the twelfth subsidiary that Brokk has established or acquired in recent years, and is yet another proof of Brokk’s long-term commitment to its customers around the world. “We are now making an important strategic investment in the Swiss market. Our Swiss customers’ high demands on both the machines and the after-market service makes for a very good fit with Brokk’s values and how we operate. Consequently, we see a great potential for long-term growth and continued successful co-operation”, said Brokk Group Chief Executive Officer Martin Krupicka.

Brokk Switzerland will focus on the sales and service of Brokk machines and equipment in the Swiss market. Operation of Brokk Switzerland started in September, when Brokk takes over the operation from its current partner in the market.

Dieter Kaupp has been appointed managing director of Brokk Switzerland. Kaupp was previously leading the Brokk business at Mertec, as head of the Machinery business unit. “Our experienced

team in Switzerland look forward to continue to provide our customers with the same high level of service they are used to”, said Kaupp.

www.brokk.com


Pile driving in South AfricaSouth Africa has a rapidly emerging solar energy industry with a number of project sites in the Northern Cape. Geopile Africa is currently installing piles at sites for solar projects in the region using the Duktus piling system in combination with Atlas Copco HB 2000 hydraulic breakers. The high power and blow frequency of the HB 2000 are major advantages for this type of pile driving. “These solar field sites are generally very large. But for us this is not a problem because our piling rigs are extremely flexible and mobile Volvo hydraulic excavators equipped with powerful Atlas Copco hydraulic breakers,” said Geopile Africa head of operations and projects Jared Prowse. The Duktus piling system concentrates

4,000J/blow of the hydraulic breaker onto the pile-driving shoe, and with the breaker delivering at a rate of 400 blows per minute this enables piles to be driven easily and rapidly through harder abrasive

layers of material in the upper soils. “So far our average pile production rate is 5min/pile and with four piling rigs on site we can install up to 400 Duktus piles/day,” said Prowse. “That is the production rate that I have been aiming for because these projects require us to install over 50,000 piles in a working period of just over six months.” The Atlas Copco HB 2000 hydraulic breaker weighs 2t. The VibroSilenced system protects operators against noise and vibrations. The AutoControl

mechanism adapts the blow frequency and impact energy to the rock hardness, and the attachment is equipped with the ContiLube II integrated automatic lubrication system. The breaker is equipped with the PowerAdapt system, which shuts down the breaker if the oil pressure is too high, and is a useful feature when the hydraulic breaker is used on different carrier units.

www.atlascopco.com

Our world of demolition - we havethe experience!

Hydraulic breakers and cutters, various

grapples, shears, pulverizers and our

full hydraulic coupler A-Lock Oilmatic

WIMMER International, Industriestraße 3, 5303 Thalgau / Austria, Phone +43 6235 6655-0, Fax +43 6235 6655-18, e-mail: [email protected] www.wimmer.info

DUTCH QUALITY TAKES YOUR PROJECTS TO THE NEXT LEVEL

Diacom Trading B.V. Bijlmermeerstraat 72 2131 HH · Hoofddorp The Netherlands

High quality diamond tools by Diacom, manufacturor of diamond-segments, -corebits, -blades, coredrilling rigs and wiresaw machines. Produced with care and made with the best materials, combined with excellent service.

wwww.diacom.nlt. +31(0)23 561 52 75 f. +31(0)23 561 52 73e. [email protected]

TAKES YOUR PROJECTS TO

High quality diamond tools by Diacom, manufacturor High quality diamond tools by Diacom, manufacturor of diamond-segments, -corebits, -blades, coredrilling of diamond-segments, -corebits, -blades, coredrilling

care and made care and made with the best materials, combined with excellent service.with the best materials, combined with excellent service.

Despite excelling in areas such as mining and construction, South Africa is not on a par with its European counterparts when it comes to demolition, which is such a key driver of the African demo-lition sector, with South Africa as the leader in the field.

World’s changing but not South Africa

Atlas Copco Construction Tools Divi-sion business line manager Neville Stewart, based in Johannesburg, believes that it lags behind international trends and legislation, choosing to continue with traditional methods of demolition while the world changes. Demolition remains an exercise of excavators with hammers, generally coupled with man-ual labour. This accounts for smaller projects, whilst larger undertakings, in the mining sector for instance, are most commonly drill and blast. “There

South African legislation lagging behind EuropePDi continues its review of the South African demolition industry. Jessica Hannah reports.

have really only been improvements in existing technology in the silent demo-lition and power demolition tools, but no new methods,” said Stewart. “De-molition will grow as buildings age in South Africa, which has relatively young structures not yet ready for demolition. As space becomes an issue, methods will most likely change, leading to demoli-tion becoming more of a requirement to make way for more residential and commercial space.”

Lack of technicians and service

Another industry challenge is to main-tain and service equipment, as well as produce skilled employees to operate and maintain new machinery to opti-mum efficiency. This skills shortage is also increasing labour costs, as good technicians become a rarity. The indus-try must also gear to provide operational

support. This is a particularly significant problem in remote areas of South Africa and in deeper parts of the continent as a whole where there are opportunities in infrastructure development. The latter is a problem to be addressed as South African companies looking across borders to ply their trade.

“South Africa needs to look at greener demolition machinery and at how the construction, mining and demolition industry is dealing with sus-tainability and the impact that industry has on the future”, said Stewart.“The carbon tax doesn’t seem to have affected the demolition industry. It is paid ac-

cording to motor size and emissions at the time of purchase. What happens when machinery ages or is not main-tained well? Efficiency of attachments can also affect fuel usage and thus emissions.”

Emission and noise levels might become the key

Stewart believes that emissions and noise levels will determine future demolition methods. These are important design considerations in major markets already and South African developed machinery will have to follow suit. However, he says that we will have to wait a few years for that to happen.


Diamond toolsMade in Germany


The Austrian village of Schladming is a ski centre, which intends to invest to secure its future interest in tourism. The aerial cable car to the top of the ‘Hochwurzen’ will be renewed. Each car will be able to carry 10 passengers and have a capacity of 2,500 people/h.

Wimmer helping in the alps

But before a start can be made on the new cable car system all the buildings and installa-tions for the old system have to be removed. For this kind of job contractors could opt for demolition attachments from Wimmer Felstechnik

in Thalgau. The Topcut demolition shears are considered to be a favourite and are available in four sizes covering carriers from 16t to 75t. During 15 years of research and development for Wimmer Topcuts many improvements have

been achieved. Five different jaws have been developed for various applications and can be exchanged by customers. A speed valve was installed to cater for an accelerated jaw closing when there is no resistance, which contributes to

a higher working speed. Topcut has a reputation for reliability and efficiency and there is the pos-sibility for contractors to rent Topcut shears from Wimmer for special jobs.

www.wimmer.info

In Sweden Mistra Innovation has awarded a grant of SEK4M (EUR406,000) to HTC for its project Via Futura with the aim of describing the environmental and financial effects of using the manufacturer’s grinding technology on asphalt roadways in Sweden. The project is being run by HTC Sweden together with the Swedish National Road and Transport Research Institute, Linköping University, the Swedish Transport Administration, Svevia and Projektengagemang. An earlier pilot project showed that grinding considerably reduces noise and rolling resistance. Uneven road surfaces generate negative effects in the form of noise inside and outside vehicles, as well as by increasing the rolling resistance of the wheels, which in turn leads to increased fuel consumption. Another undesir-able effect of worn road surfaces is the increase in breathable particles. A pilot project on one of Sweden’s busiest, the E4, showed that grinding the surface reduced noise by 2.2dB(A) and reduced

HTC grinding technology in Swedish research projectthe rolling resistance by between 4% and 7%, resulting in a reduction in fuel consumption of 2%.

“At HTC we see the application of HTC’s tried and tested grinding technology to surfaces other than stone and concrete floors as very exciting,” said HTC business area manager Per Sandström. “HTC has been developing this technology for many years and we hope this project will confirm what we believe our method increases travel comfort, as well as saving both the environment and the taxes spent on repairing the infrastructure.”

HTC estimates that the grinding method could lengthen the service life of a road surface by ap-proximately 20% to 50%, which would be a major cost saving. Grinding is a relatively fast process and it can be done either across the entire roadway or just along parts of it. Determining which of these is the optimum procedure will also be one of the aspects studied in the project, which is expected to be completed in December 2015.


Although Bauma broke visitor records, it fell short of a record for launching new products. In the wheel loader sector, most manufacturers just spruced up the machines previously shown at Intermat a year earlier. But, given the life cycle of a wheel loader, these machines may well be regarded as new. PDi’s Andrei Bushmarin reports.

Emission regulations exert a major influence on the development of off-road construction vehicles. As they get increasingly tighter, engineers are forced to find ways to achieve an optimum balance between the power of an engine and the quality of the exhaust gas it generates. Currently there are two methods commonly used to reduce exhaust emissions. These are selective catalytic reaction and diesel particulate filter. Each has its pros and cons, but both effectively serve their purpose.

SCR vs. DPF Selective catalytic reaction turns nitrogen oxides in exhaust fumes into nitrogen and water. This method is used in the engines that power the latest New Hol-land, Case and Caterpillar wheel loaders. The Cat988K is equipped with the Cat C18 ACERT engine that meets the Tier 4 Final/Stage IV standard. It features electronic fuel control, ensuring optimum performance and throttle response and delivering up to 20% greater fuel efficiency, compared with its predecessor 988H, the company claims. Additional fuel savings accrue with the Cat988K Eco mode, engine idle shutdown system, and engine idle kick down/automatic resume system.

The Case521F and Case621F wheel loaders come complete with common rail engines, which also use SCR with diesel exhaust fluid to meet the Tier4 interim standard. Operators can choose from the four working modes of maximum, economy, normal and automatic to fine tune the machine performance to a specific application.

Volvo CE prefers to install diesel particulate filters in its wheel loaders. The diesel particulate filter is a device that retains up to 90% of soot and diesel particulate matter. All Volvo small and mid-range models are fitted with turbocharged diesel engines, which feature cooled gas recirculation and a DPF with active regeneration.

Cat988K: a perfect loading tool The Cat988K is one of the few wheel loaders that were premiered at Bauma. The 50t model features redesigned

loader linkage, drive train modifications, redesigned cab and enhancements in safety and serviceability. The Z-bar linkage has replaced the mono-boom construction of the previous Cat988H to enhance the 988K’s versatil-ity in small quarries and underground applications. The new cab is equipped with Cat’s next generation vital information management system that informs the operator in real time of fuel consumption and efficiency through an interactive touch screen. In-cab sound levels are reduced to 71.1dB(A), down from 74.2dB(A) in the Cat988H, and the cab temperature control system is automatic and continuously variable. A remote panel houses a stairway light switch, engine shutdown switch, and lockouts for the transmission and engine starter. A second panel provides access to the battery disconnect switch and a jump-start receptacle. A rear view camera system provides images to the in-cab monitor. Routine maintenance points, including hydraulic pressure taps and oil sampling ports, are easily accessed. The 988K will be available from August.

www.cat.com

New compact from Wacker Neuson

Germany-based Wacker Neuson used Bauma to showcase the WL 20, the smallest wheel loader in its nine model range. With a height of 2.19m and a width of 1.08m, the new wheel loader is very handy on jobs in confined areas and inside build-ings. An articulated swivel joint allows the machine to maintain contact with the ground with all four wheels, even on uneven terrain. As the front and rear ends can oscillate independently of each other, the wheels always have maximum

traction. With an operating weight of 2t, the loader has a tipping load of 1.24t. The shovel capacity with a standard bucket is 0.2m?. The WL20 is available with a fold-down canopy roof.

www.wackerneuson.com

The Volvo 5 First presented at Intermat, the L45G, L50G, L60G, L70G and L90G, are the latest additions to Volvo CE’s small and mid-size ranges of wheel loaders. Fitting in the

9t-10t weight class, the smaller L45G and L50G boast versatility and performance of larger

machines. The machines feature Volvo’s TP Linkage, ensuring high breakout force and parallel movement throughout the

entire lifting range. This combina-tion gives high tilt-back torque

and lifting power, while the progressive lift helps retain

loose bucket material and mini-mises dis-t u r b i n g the load w h e n lifting

NEW CAT MP300 SERIES MULTI-PROCESSORSSpeed and power. The new Cat MP300 series combines innovations in hydraulics and booster technology to make cutting and crushing even faster! So efficiency and productivity go up. The MP300 series sets the performance standard for demolition work tools. Contact your Cat dealer for a great deal. Cat.com

©2013 Caterpillar Inc. All rights reserved. CAT, CATERPILLAR, their respective logos, “Caterpillar Yellow” and the POWER EDGE trade dress, as well as corporate and product identity used herein, are trademarks of Caterpillar and may not be used without permissionAEXQ1066-00

IF YOU’VE GOT A JOB TO DO, WE’VE GOT THE TOOL TO DO IT

114285_Ad_NewGenMP_(AEXQ 1066)_PDi.indd 1 23/08/13 9:33 AM


pallets. The combination of stable load and high-reach of the linkage design allows dumping into high-sided trucks.

The bigger L60G, L70G and L90G are complete with Volvo’s six-litre, six-cylinder turbocharged V-ACT diesel engine, providing high torque at low engine speeds. The new engine capabilities are matched to those of drive train, hydraulics and lifting systems. Thanks to high-capacity axial piston pumps with variable flow, the working hydraulic pressure has been increased from 260bar to 310bar, ensuring superior control of the load and attachments as well as higher breakout forces and faster lift and tilt functions. Transmissions feature Volvo’s fully automatic power shift concept, which ensures that the loader always operates in the right gear by sensing engine and travel speed, kick-down, engine braking and other factors. Offering operators a choice of four gear-shifting programs, APS results in more efficient work cycles with lower fuel consumption and wear.

www.volvoce.com

Goldhofer unveils a pioneering suspension concept

Germany-based Goldhofer, one of the world’s leading manufacturers of special transport vehicles, premiered

at Bauma a pioneering suspension concept based on the MacPherson axel system. Following the principle ‘less is more’, the new concept, named

MPA axel technology, involves just three basic elements: a wheel carrier, a strut and a

suspension arm. Previously, the MacPherson system had only

been used in the car industry,

and now Goldhofer is attempting to adapt it for heavy-duty vehicles. The MPA axel technology is being tested under various loads in different road conditions, and the results obtained so far are more than encouraging. The new semitrailers have been cleared for production, which will start in early autumn.

www.goldhofer.de

Hitachi wheels out a new mid-size model

Hitachi Construction Machinery (Eu-rope) has extended its mid-range of wheel loaders. Presented at Bauma, the new

ZW220-5 comes complete with a 7.8-litre six-cylinder water-cooled turbo engine, enabling a powerful digging performance and high travel speeds. A newly-designed clutch cut-off system allows for smooth operation when it is loading. The machine has two work modes. In the standard mode, the engine speed is controlled, which al-lows for smooth and efficient acceleration during loading, regular operations and travelling on level terrain. The P mode is useful when greater traction force is required for heavy-duty excavation and travelling uphill. The wheel loader features a new hydraulic circuit, which facilitates the combined operation of the bucket and lift arm for loading, and prioritises the use of the bucket for unload-ing. Visibility is boosted thanks to a pillar-less windshield and large sun visor. The counterweight is also visible from both sides of the machine. The shift-up delay to third gear makes it safer for the loader to operate in confined spaces, because it can perform excavating and unloading tasks more safely in first and second gear. The cab is more spacious than the previous model, because the heated air-suspension seat can slide further back, providing more legroom. The tilting telescopic pop-up steering column has also been repositioned to create additional space.

www.hcme.com

Manufacturer of the worlds largest range of Dust Suppression Systems

C O N S T R U C T I O N I D E M O L I T I O N I W A S T E D U M P S I Q U A R R I E S I R E C Y C L I N G

Learn more about the DUST FIGHTERS range and contact us on:

[email protected] or take a look online at www.dfecology.it

DF Ecology to�er l. Advert 122x190mm_PDI 2013

maximum powerRM 80GO!

MAXIMUM POWER, EASY HANDLING

www.rubblemaster.com

RUBBLE MASTER HMH GmbH Im Südpark 196, AT 4030 Linz, Austria Tel.: +43 732 73 71 17 - 360 Fax: +43 732 73 71 17 - 101 email: [email protected]

We look forward to see you at

bauma Africa / Stand (Outdoor): C20

When are you going to start?Turn your natural stone or rubble into high-value aggregate and profit from the word “GO!”. With the RM 80GO! you too can earn money from rubble recycling both easily and reliably!

It is fair to call Austria the recycling centre of Europe as it has more manufacturers of mobile recycling equipment per capita than any other country in Europe. But to be precise, it is the city of Linz and the neighbouring towns and vil-lages that constitute the real capital of mobile recycling. It was in Linz that Hanisch started his company 20 years ago.

Tough beginningHanisch, a graduate in mechanical engineering from the LiTec College Linz, initially got involved with mobile recycling when working for a company based in Linz. He did not stay long as he was never a nine-to-five man, content to just perform his duties. An entrepreneur by nature, he detected a gap in a rather tight-knit recycling market that nobody had yet filled and went for it. That gap was compact mobile recyclers for inner city jobs. He pictured machines that would be nimble, easy-to-operate and affordable. In 1991 he left his job and teamed up with a colleague to form a new company called HMH, which had a difficult start. The early 1990s were a time when the e-commerce bubble burst, and getting finance for a start-up project was a major obstacle. Eventually, a loan from the government of Linz helped overcome that. The prototype machine was unveiled in 1993, and, later in the year, the fledgling manufacturer supplied its first compact recycler RM 50 to the Austrian customer.

International ambitions from the start In the early days the company only had three employees, but it didn’t deter Hanisch from prioritising the interna-tional market. But, as a new company HMH was facing a big challenge of having to convince buyers of the advantages of its ma-chinery. Under 30t recyclers were unheard of at the time, and it took

The Master of Rubble! In this latest Inside Talk, we feature Ger-ald Hanisch, the chief executive officer of the Austria-based com-pany Rubble Master. Hanisch spoke about the nuts and bolts of the recycling indus-try with PDi’s Andrei Bushmarin.

the market a while to recognise their potential. Germany, as usual, lead the way by becoming the first country to buy an HMH machine. The UK, Denmark and a number of Eastern European states soon followed. But a truly global recognition came to HMH in the late 1990s with the development of its mobile crushers RM 60 and RM 80. The latter became a best seller, which allowed the company to considerably expand its international sales network. In the early 2000s, the Austrian manufacturer conceived and realised a concept of environmentally friendly recycling dubbed RM Enviro. It called for the use of integrated soundproofing and dust suppression systems at critical points of the recycler and a hybrid diesel-electric transmis-sion. It was also around that time that the Austrian com-pany penetrated the US market with its proven crushers and a newly designed range of screens. An office was set up in Memphis, Tennessee to run the North American operation.

Birth of the GO! concept The 2006-07 construction boom allowed HMH to reach new heights. It added South Africa to the list of conquered markets, opened up an office in the UK and began expanding its headquarters in Linz. It was then and there that the GO! concept was born. Sim-

First RM model on the market.

The entrance to the HQ in Linz, Austria.

inside talkinside talk



The Master of Rubble! plicity of operation had always been a trademark quality of every HMH machine, and the GO! range became the ultimate realisation of that principle. With a GO! crusher, all the operator has to do is push the button and start work-ing. No setting-up or extra tuning is necessary. The GO! concept was a second major break-through for HMH after the RM 80 success, which unfortunately was marred by the onset of the global recession. To weather the storm, the company, which was rebranded in 2008 as Rubble Master HMH, had to tighten its belt and even lay off some staff. Hanisch remembers that letting those employees go was one of the hardest decisions he has ever had to take as a manager. But once the worst was over most of the people that were laid-off were re-employed.

New dawn In 2010, things were on the up again. In an attempt to replicate the business model that worked so well in Austria, the manufacturer registered a sales office in Switzerland and went through yet another rebranding procedure. The reasoning behind rebranding was to show the market that the company was ready to move on and try its hand in new business areas, the extractive industry being one example. The renamed RM Compact Crushing continues to expand its range of mobile crushers and screeners, to which a model

of stacker has been recently added. The MTS 2010 stacker was first unveiled at Bauma, along

with a range of crushers, featuring the anew RM TWO-GO! hybrid

technology. These crushers come complete with both diesel engine drive and an electric motor.

Spokesman for the customer The cornerstone of Hanisch’s business philosophy is that he, as the chief executive officer, must maintain close contact with his customers, picking up their ideas and translating them into new and better solutions. He himself calls it ‘be-ing a spokesman for the customer’. Being able to think on your feet and react immediately to ever-shortening industry cycles is another important characteristic of a successful manager, believes Hanisch. He has built his business around three core principles of product development that should never pause, elaborate design of the machines and clever marketing. RM machines are now sold in over 90 countries, and the list keeps growing as the company expands its dealer network. The forth coming Bauma Africa, where Rubble Master will have a large stand in the outdoor area, will provide an ideal opportunity to do just that.

www.rubblemaster.com

Gerald Hanisch, CEO of Rubble Master.

Above the futuristic RM headoffice.

The RM 100GO in action.

The RM 80.




★

1975

1985

1995

For decades, World of Concrete has provided an education program specifically designed for the concrete and masonry professional. Now in its 40th year, World of Concrete offers more than 100 sessions across targeted tracks in 90-minute, 3- and 4-hour formats, with continuing education opportunities, as well as hands-on training and workshops. Take advantage of these world-class opportunities to elevate your career and increase your bottom line.

A selected participant in the International Buyer Program

Source Code: PDM

World-Class Educationof

A ★ ★TRADITION

Here’s to 40 years of big ideas. And 40 more of bigger possibilities.

January 21-24, 2014 ★ Seminars: January 20-24, 2014 Las Vegas Convention Center ★ Las Vegas, Nevada

www.worldofconcrete.com

PDM_190x263mm_WOC14_AD_SeminarslWOM.indd 1 8/19/2013 3:24:47 PM

During the five years to 2013, the US road construction industry grew at an average annual rate of 2.8% to $49.7bn (EUR37.4bn). In 2013, revenue is expected to increase 3.5% due to increases in government funding for highway projects. While revenue has grown, US highway contractors were not immune to the recession’s negative effects. Falling demand from the private sector and decreased state and local government funding have drastically increased competition for federally funded projects. As competition intensifies, operators are increasingly competing for projects on price, consequently profit margins are suffering.

In the short term, there will be a small market improvement due to certainty in funding because of the new federal highway bill (MAP-21) passed in July 2012. The legislation means that states are more likely to start and fund medium scale projects with funding levels assured through

US road construction to increase by 3.5%

through 2013

2014. However, long-term market prospects remain difficult as both state and federal gov-ernments refuse to increase their respective gas taxes or implement other funding schemes.

Without expanded user-based fees, states will have to use more and more of existing funding to maintain existing infrastructure, and make more use of alternative financing schemes such as public-private partnerships, state infrastructure banks and tolling to finance new construction. This will limit growth through the decade for all segments of the road construction market.

The industry is expected to return to mod-erate growth in 2013, with the new Surface Transportation Extension Act of 2012. Addition-ally the Moving Ahead for Progress in the 21st Century Act (MAP-21) into law in July 2012 will fund surface transportation programmes at more than $105bn/year (EUR79bn) for the 2013 and 2014 fiscal years.

2 0

1 4

DEMCON 20144-5 September

InfraCity, Stockholm, Sweden

www.demcon.se


Robi now provides you with competitive advantage through a complete range of hydraulic attachments for demolition, sort-ing and screening jobs. The state of the art product line includes screening buckets, hydraulic hammers, demolition grapples, sorting grapples, cutter crushers and pulverizers.

Robi’s product lines gives more to our customers, so if you too want to make Robi your right arm, please contact Ramtec Oy or your local Robi dealer.

Ramtec Oy ■ Veivikatu 4, PL76, 15101 Lahti, Finland +358 207 424 530 ■ [email protected] ■ www.ramtec.fi

In July 1960 Ernst Günter Lehnhoff founded the company Metallbearbeitung Steinbach in the spa town of Baden-Baden repairing gears. Two years later the company exhibited at Bauma for the very first time, which influenced a fundamental change to the company’s strategy.

Focus on excavator attachmentsGone were the gears and together with a change of name to Lehnhoff Hartstahl, the company refocused on manufactur-ing tooth systems for backhoe and shovel buckets. That was a groundbreaking decision, which, to a large degree, shaped Lehnhoff into the producer it is now. The late 1960s was a momentous period for the German company. In 1967 it became one of the first manufacturers in the world to make excavator attachments from armoured steel. Just one year later Lehnhoff received an order from a customer to develop what would become the world’s first tilting bucket. Lehnhoff rose to the challenge and soon delivered the model, but never bothered to patent it. When Ernst Günter Lehnhoff passed away in 1980, his son Peter Alexander picked up the reigns. During the 1980s, Lehnhoff extended and expanded its range of attachments, which resulted in it being chosen the original equipment sup-plier for Komatsu Germany in 1984. But a pivotal moment Lehnhoff ’s fortunes came in 1989, when it devised its first

tomatic devices that really make a difference for excavator operators and owners. Using such a coupler, operators can change between various attachments within seconds while staying in the cab, which increases productivity but also improves their safety. Another benefit of an automatic quick coupler is that all hydraulic lines are routed inside the system, which prevents any oil leakages.

Competition is still limited in this sector, with only a few companies dominating the global market. Lehnhoff began working on its own fully automatic coupler in 2004, and three years later unveiled the prototype at Bauma. The new device named Variolock was based on the proven Lehmatic system and boasted high rates of reliability. According to Lehnhoff, some Variolocks have racked up 2,000h without a single incident of malfunction.

Hard work ethics Putting in an honest day’s work is not difficult to the Lehnhoff staff. The company has a strong work ethic and even named its canteen ‘Hard Work Café’. With 170 em-ployees, Lehnhoff is a mid-size company and 120 work in production, 30 perform the sales and administration tasks and another 20 work on research and development. The large Research & Development department is a necessity, because

LEHNHOFF AT THE ‘HARD WORK CAFÉ’Automatic quick couplers are now an integral part of al-most every demolition contractor’s arsenal. Thanks to these simple devices, the chang-ing of work tools and attachments can be made in a matter of seconds. Currently only a few companies make them, including Lehnhoff Hartstahl in Germany. PDi’s Andrei Bushmarin reports.

Ernst Günter Lehnhoff, the founder.

Peter Alexander Lehnhoff, the current CEO of the Lehnhoff company.

quick-coupling system for mini-excavators the Lehmatic MS03.

Quick couplers - a new direction Having designed the Lehmatic system, Lehnhoff realized it had struck a very rich vein, and lost no time in developing it. By 1992, the manufacturer was able to offer an extensive range of quick couplers for carriers ranging from 1t minis to 70t hydraulic excavators. Five years later, Lehnhoff delivered a first Lehmatic HS100 quick coupler for a 100t demolition excavator. Lehmatic couplers proved very popular and by 2001 around 30,000 units had been sold worldwide. Part of the profit was reinvested in upgrading production facilities with new equip-ment, like laser cutting stations, welding robots and computer numerically controlled processing centres.

Development of Variolock There are a few types of quick couplers, but it is fully au-

To demonstrate capabilities of Lehnhoff tools to potential customers, the company is building up a demonstration area next to the main building.


LEHNHOFF AT THE ‘HARD WORK CAFÉ’

Lehnhoff designs a lot of one-off products. The Baden-Baden facility covers 20,000m2 and houses equipment for the production of all types of quick couplers and excavator attachments. To demonstrate the capabilities of Lehnhoff tools to potential customers, the company is building a demonstration area next to the main building. This will be big enough to accommodate five 3.5t to 23t excavators that will be used to demonstrate the advantages of Lehnhoff quick couplers and various attachments. The range of attachments is constantly growing and Lehnhoff has been finalising a new range of sorting grapples, which will be launched in

September. Having established a strong foothold in Europe, Lehnhoff is now looking to attack overseas markets by using its tried and tested strategy of direct sales and trade shows, which proved so effective in Europe.

www.lehnhoff.de

The “Hard Work Café”.

Lehnhoff premises in Baden-Baden.

Below Lehnhoff’s marketing manager Rainer Matz and marketing specialist Christiane Kaufmann.

Lehnhoff uses state-of-the-art laser cutting stations, welding robots and CNC processing centres to manufac-turer quick couplers and attachments.


The Brazilian specialist con-crete cutting contractor Servi-técnica, has carried out a de-manding job at the Fibria Ce-lulose paper production plant in Aracruz, once the biggest paper mill in the world.

Servitéchnica, based in Belo Horizonte in the state of Minas Gerais, visited the site and produced a cutting plan for the job. The contractor drew up a schedule of work that projected completion in just four days. This met the client’s expectations and the project was ap-proved. Servitéchnica has considerable experience of this kind of job and has worked with concrete sawing and drilling as well as demolition for more than 20 years. It is one of the bigger concrete cutting companies in Brazil and has also a subsidiary for remotely controlled demoli-tion called Demoloção Remota. Besides its head office and workshop in Belo Horizonte. Servitécnica also has branch offices in Rio de Janeiro, Salvador and Vitória.

Scheduled cleaning stopsIn the Fibria Celulose plant production has to be stopped to make scheduled shutdowns for removing solid material from the effluent mixing tank resulting from the manufacturing processes. This is a deposit on the bottom of four tanks, each divided into three levels. Maintenance access to the four tanks is gained through 600mm x 600mm openings in concrete slabs, making cleaning operations extremely slow.

Fibria Celulose, contracted Servitecnica to remove the 12 heavily reinforced concrete slabs measuring 3.4m x 2.6m, and each weighing 4.4t. At the same time the tanks would remain in operation and the company had to ensure that the process adopted would not result in any solid material falling into the tanks.

Hot and smellyDue to the irregularities in the slabs and the impossibility of gaining access to their undersides it was decided to cut them using wall saws equipped with 800mm diameter blades. Two wall saws and two electro hydraulic 20kW Tyrolit units were used simultaneously to cut and remove the slabs in daily shifts of 12 hours.

When removing the slabs, to make the interior of the tanks visible, the work was very hot due to the high temperature of the very smelly liquid in the mixing tanks. Each concrete slab was hoisted at four points and removed using a crane. The job was finished in four days, as to the schedule, without any accident or safety

Servitécnicaimproved theproduction

incident. On completion the factory staff congratulated Servitécnica for the quality and speed of their work.

Removing the effluent mixing tank covers, will allow the removal of solid residues from the interior of the tanks to be mechanised, resulting in shorter factory shutdowns and improved productivity.

www.servitecnica.com.br

Facts about Fibria CeluloseFibria Celulose is considered to be the world’s leader in the production of eucalyptus pulp. Fibria has an annual production capacity of 5.3Mt, from mills in Três Lagoas, Aracruz, Jacareí and Eunápolis. Together with Cenibra it oper-ates Portocel in Aracruz, the only Brazilian port specialising in pulp shipments.

With its operations based entirely on renewable forest plantations, Fibria

has a total forest base covering 970,000 hectares, of which 343,000 hect-ares is native forests that have been set aside for environmental conservation.

In October 2012, the company entered into an alliance with the American company Ensyn to invest in renewable fuels derived from wood and biomass.

The Norwegian ship owner Erling Lorentzen established a paper


production company in Aracruz in 1968 called Aracruz Celulose. In co-operation with the Swedish paper production company Billerud, Aracruz Celulose built a paper production plant in 1978, with eucalyptus as the raw material. The production plant in Aracruz was at that time considered the biggest in the world.



CSDA’s new electric safety videoIn the US the Concrete Sawing and Drilling As-sociation has released its new Electrical Safety video. The aim of this video is to spark interest in electrical safety in the industry and make employees aware of current safety procedures.

According to the Bureau of Labour Statis-tics, electrocutions accounted for over 170 fatal occupational injuries in 2011 across the US. In addition, the Occupational Safety and Health Administration issued almost 3,500 citations for breaches of its electrical standards between 2011 and 2012. Therefore, it should come as no shock that the CSDA has produced a video to help contractors avoid and manage electrical hazards on jobsites.

Electrical Safety is the latest in a series of training and certification resources from CSDA. Since its launch in 1995, the CSDA Training Programme has expanded to offer both hands-on and online classes totalling 34 products. More than 3,700 classes have been completed to date, and CSDA has sold over 1,500 hard copy safety videos to the industry.

This new video follows on from previous guidance on electrical safety included in the association’s 230 page Safety Manual, its Safety Handbook and several of its Toolbox Safety Tips. In addition, through its ongoing Alliance partnership with the OSHA, CSDA released an OSHA Alliance Best Practice on electrical safety in 2010. This document is available to download from the CSDA Website.

“This is an important video for contractors who operate electric powered equipment and for employees working on jobsites with electrical hazards, which is almost everyone,” says Dan Cowperthwait from Atlantic Concrete Cutting and CSDA safety committee chairman. “Following the guidance provided in Electrical Safety could be the difference between life and death.”

Electricity is widely recognised as a seri-ous workplace hazard and employees can be exposed to electric shocks, burns, fires and explosions on sites. Like most industries, the concrete demolition and renovation industry is experiencing an increase in electric powered equipment. More than ever before, it is crucial that employees be trained in hazard recognition and safety procedures related to electricity.

The 20min Electrical Safety video is avail-able online via www.csdatraining.com or in DVD format for employers to purchase and conduct electrical safety training.

www.csda.org

Train more and save with CSDAAs the US Concrete Sawing and Drilling As-sociation’s training programme approaches a milestone of 4,000 graduates, the association is now offering a range of discounts up to $1,000

(EUR750)/student. Due to an increasing interest in its range of hands-on and classroom courses, the CSDA has created a pricing structure for those who want to train two or more employees at once.

Under the new pricing structure, an em-ployer could send three employees to a two-day training or certification class and the savings would equate to almost 25% of the standard price. These savings can increase further if the employer registers more students, but the association is aware that not all companies can afford to have multiple employees off jobsites or out of the shop or office. “We had several contractors express an interest in sending two or more employees to training classes but the costs associated with registration, travel and accommodation quickly add up,” said CSDA training committee chairman Kevin Warnecke. “By offering tiered prices, we hope to present contractors with significant discounts that lower overall costs and allow more employees to at-tend and receive training. This is a great deal for both the employer and employee.”

Tiered pricing applies to all future two-day hands-on and classroom courses hosted by CSDA and its training partners. Classes held at World of Concrete are excluded from the new pricing structure, but will remain at the competi-tive price of $785 (EUR590)/student.

“Training has always been a worthwhile investment for any business and we have seen so many companies benefit from our hands-on and online classes”, said CSDA executive director Patrick O’Brien. “We want our classes to be an affordable investment for our smaller member companies and offer discounts to those larger companies who want to train several employees together.”

The association launched its training pro-gramme in 1995, which now consists of 34 hands-on classes and online sessions. More than 3,700 classes have been completed to date, and CSDA has sold over 1,500 hard copy safety and training videos to the industry.

www.csda.org

NDA testifies on Philadelphia building collapseIn testimony before the Pennsylvania House Committee on Urban Affairs concerning legisla-tion meant to change safety requirements for city demolition projects, the National Demoli-tion Association executive director supported many elements of the law, but took issue with requirements on project oversight. Specifically, the bill would require all demolition plans for commercial structures in Class One Cities in the Commonwealth to be reviewed by a licensed architect or professional engineer.

“While in no way impugning the value of these professions, they simply lack the train-

ing and education in the demolition process to oversee the work being performed by a competent demolition contractor,” said NDA executive director Michael R. Taylor. “The NDA strongly recommends the use of a professional engineer when an association member is con-fronted with a challenging structural issue on a project site. However, few, if any, architects or professional engineers, unless they have worked in the demolition industry, have the training or expertise to knowledgeably comment on the work plans of a demolition project.”

The hearing was precipitated by a demoli-tion accident in June in Philadelphia that killed six people. The NDA was invited to provide testimony because it represents more than 800 firms involved in the approximately $5bn (EUR5.8bn) demolition industry. Taylor pointed out in his testimony that according to statistics compiled by the US Bureau of Labour Statistics and Occupational Safety and Health Administra-tion, the seemingly dangerous industry is in fact overwhelmingly safe, with only one workplace fatality occurring every one million man-??hours.

“It seems a wise idea to the NDA to include a system of review of construction codes, ad-ministrators, and third party agencies charged with enforcement and administration of laws,” said Taylor. He noted that under OSHA standard 29 CFR 1926.850, a written engineering survey is prepared by a competent person to determine a structure’s condition and the possibility of un-planned collapse of any portion of the structure.

In the testimony, Taylor also addressed the proposed requirement for at least $1M (EUR755,000) in liability insurance could have an economic impact on certain smaller demolition projects. “For companies new to the demolition industry, these additional costs could have an impact on getting started in the industry,” said Taylor.

A full copy of Taylor’s testimony is avail-able at http://www.demolitionassociation.com/OURINDUSTRY/DisasterResponse/tabid/265/Default.aspx.

demolitionassociation.com

Las Vegas for NDA convention 2014In the US the National Demolition Association’s 41st annual convention will be held at the Mirage hotel in Las Vegas on 22-25 Febru-ary 2014. It will be the largest exposition of demolition products and services in the world.

Each year the NDA convention brings together a wide cross section of professionals involved in the demolition process, includ-ing those in demolition contracting, general contracting, civil engineering, recycling, scrap, salvage and other industries. The convention includes educational programmes, entertain-ment, and networking opportunities for NDA members and other visitors.

The NDA is a non-profit trade organiza-

tion representing approximately 800 US and Canadian companies and many international firms that are involved in the demolition process. Membership includes demolition contractors, general contractors, civil engineering firms, and recycling, landfill, and salvage operations. The association’s efforts help members stay abreast of environmental, regulatory and safety matters, keep regulators informed about issues facing the industry, increase public and industry awareness, and provide members with network-ing opportunities and information on the latest technical advances in equipment and services.


US NDA’s new directorIn the US the National Demolition Association, the trade organisation representing the global demolition industry, has appointed Kim Wieland director of member services, reporting directly to executive director Michael R. Taylor.

Wieland will be responsible for the develop-ment and implementation of the organisation’s new education initiative, designed to provide man-agement and safety training to the demolition in-dustry, while improving professional competency. She will also be working on expanding the NDA’s other member services, advancing the recruit-ment and retention of members, enhancing the NDA’s social media and branding programmes, and working on public relations efforts.

Wieland previously worked on association educational programmes for the American Lung Association and the National Rural Electric Cooperative Association. She also served as a teacher and has a bachelor’s degree from Washington Adventist University and a master’s degree in global public health from George Washington University.


People. Passion. Performance.www.cp.com

BUILT TO WORK. BUILT TO LAST.When you’re on the job, there’s no

time for downtime. Count on Chicago

Pneumatic RX hydraulic breakers to

power through the toughest tasks day

in and day out. The advanced design

has fewer components with only

two moving parts, which adds up to

easy maintenance and reliable, quiet

operation for years to come. For the

full selection of light-, medium- and

heavy-duty RX breakers, visit cp.com.

Chicago Pneumatic Construction [email protected] | www.cp.com

[Title will be auto-generated]

Documents

caelectric wall sawdsw

new hilti dst

eelectric wall sawdd

ca electric wall

liechtenstein i

wire sawhilti corporation

site reportdemcos unicut

ewire sawds ws