Titan Supply Rigging Products Catalogue

SUPERIOR PRODUCTS, EXCEPTIONAL SERVICESUPERIOR PRODUCTS, EXCEPTIONAL SERVICE

ITANIGGING

RODUCTST

PR

C A T A L O G U ERigging Products

Wire Rope Slings Tuff-Lift® Wire Rope Slings ..................................................................................................... Standard Options .................................................................................................................... Two Three & Four Leg Bridle .................................................................................................. Gator-Flex®, Gator-Flex® Grommets ..................................................................................... Tri-Flex®, T&D Ultra-Flex ..................................................................................................... Gator-Laid®, Gator-Max® ....................................................................................................... Web Slings Tuff-Lift® Web Slings ............................................................................................................... Tuff-Lift® Diamond Edge Slings .............................................................................................. Round Slings Tuff-Lift® Round Slings ............................................................................................................ Twin-Path® Slings .................................................................................................................... Check-Fast® Inspection System ..............................................................................................Sling Protection Synthetic Sling Protection ........................................................................................................ Abrasion Protection ..................................................................................................................Chain Slings Tuff-Lift® Chain Slings .............................................................................................................. GrabIQ Chain Slings .................................................................................................................Shackles Screw Pin, Alloy Screw Pin ....................................................................................................... Bolt Type Anchor ....................................................................................................................... Wide Body .................................................................................................................................Hardware ..............................................................................................................................................Hoisting Equipment Lever Hoists ............................................................................................................................... Chain Hoists ............................................................................................................................... Beam Clamps ............................................................................................................................. Crosby IP Beam Clamps .......................................................................................................... Plate Clamps .............................................................................................................................. Horizontal Lifting Clamps ........................................................................................................... Beam Trolleys ............................................................................................................................ Spreader & Lifting Beams .......................................................................................................... Tirfors & Schaefer Comealongs .................................................................................................Blocks & Sheaves .................................................................................................................................Permanent Lift Magnets .......................................................................................................................Winches ...............................................................................................................................................Technical Data Sling Information ........................................................................................................................ Removal Criteria ........................................................................................................................Rigging Services Mobile Test Bed, Inspection Service, RFID ............................................................................... Training & Seminars, Resource Materials .................................................................................

112345

66

788

99

1011

12131415

161718192021222324252525

2627

2829

TM

Rigging Products

SUPERIOR PRODUCTS, EXCEPTIONAL SERVICE

5:1 Design Factor Working Load Limit in Pounds

WIRE ROPE

SIZE (in.)

STD. EYE SIZE(in.)

XIP APPROX.WEIGHT(lbs./ft.)VERTICAL CHOKER BASKETVERTICAL CHOKER BASKETVERTICAL CHOKER BASKET

1/4 4 13001/4 4 13001/4 4 1300 2600 0.12600 0.15/16 6 20005/16 6 20005/16 6 2000 4000 0.24000 0.23/8 6 28003/8 6 28003/8 6 2800 5600 0.35600 0.3

7/16 8 38007/16 8 38007/16 8 3800 7600 0.47600 0.41/2 8 50001/2 8 50001/2 8 5000 10000 0.510000 0.5

9/16 10 64009/16 10 64009/16 10 6400 12800 0.612800 0.65/8 10 78005/8 10 78005/8 10 7800 15600 0.815600 0.83/4 12 112003/4 12 112003/4 12 11200 22400 1.122400 1.17/8 14 152007/8 14 152007/8 14 15200 30400 1.530400 1.5

1 16 196001 16 196001 16 19600 39200 1.939200 1.91 1/8 18 240001 1/8 18 240001 1/8 18 24000 48000 2.548000 2.51 1/4 20 300001 1/4 20 300001 1/4 20 30000 60000 3.060000 3.01 3/8 22 360001 3/8 22 360001 3/8 22 36000 72000 3.772000 3.71 1/2 24 420001 1/2 24 420001 1/2 24 42000 84000 4.484000 4.41 5/8 26 480001 5/8 26 480001 5/8 26 48000 96000 5.096000 5.01 3/4 28 560001 3/4 28 560001 3/4 28 56000

9751500210028503750480058508400

1140014700180002250027000315003600042000 112000 5.742000 112000 5.742000 112000 5.7

WIRE ROPE

SIZE (in.)

STD. EYE SIZE(in.)

XIP APPROX.WEIGHT(lbs./ft.)VERTICAL CHOKER BASKETVERTICAL CHOKER BASKETVERTICAL CHOKER BASKET

2 32 74000 55500 148000 7.42 32 74000 55500 148000 7.42 32 74000 55500 148000 7.42 32 74000 55500 148000 7.42 32 74000 55500 148000 7.42 32 74000 55500 148000 7.42 32 74000 55500 148000 7.42 1/8 36 80000 60000 160000 8.42 1/8 36 80000 60000 160000 8.42 1/8 36 80000 60000 160000 8.42 1/8 36 80000 60000 160000 8.42 1/8 36 80000 60000 160000 8.42 1/8 36 80000 60000 160000 8.42 1/8 36 80000 60000 160000 8.42 1/4 36 88000 66000 176000 9.42 1/4 36 88000 66000 176000 9.42 1/4 36 88000 66000 176000 9.42 1/4 36 88000 66000 176000 9.42 1/4 36 88000 66000 176000 9.42 1/4 36 88000 66000 176000 9.42 1/4 36 88000 66000 176000 9.42 3/8 40 98000 73500 196000 11.62 3/8 40 98000 73500 196000 11.62 3/8 40 98000 73500 196000 11.62 3/8 40 98000 73500 196000 11.62 3/8 40 98000 73500 196000 11.62 3/8 40 98000 73500 196000 11.62 3/8 40 98000 73500 196000 11.62 1/2 40 108000 81000 216000 14.02 1/2 40 108000 81000 216000 14.02 1/2 40 108000 81000 216000 14.02 1/2 40 108000 81000 216000 14.02 1/2 40 108000 81000 216000 14.02 1/2 40 108000 81000 216000 14.02 1/2 40 108000 81000 216000 14.02 5/8 44 120000 90000 240000 14.62 5/8 44 120000 90000 240000 14.62 5/8 44 120000 90000 240000 14.62 5/8 44 120000 90000 240000 14.62 5/8 44 120000 90000 240000 14.62 5/8 44 120000 90000 240000 14.62 5/8 44 120000 90000 240000 14.62 3/4 44 130000 97500 260000 15.32 3/4 44 130000 97500 260000 15.32 3/4 44 130000 97500 260000 15.32 3/4 44 130000 97500 260000 15.32 3/4 44 130000 97500 260000 15.32 3/4 44 130000 97500 260000 15.32 3/4 44 130000 97500 260000 15.32 7/8 48 142000 106500 284000 15.92 7/8 48 142000 106500 284000 15.92 7/8 48 142000 106500 284000 15.92 7/8 48 142000 106500 284000 15.92 7/8 48 142000 106500 284000 15.92 7/8 48 142000 106500 284000 15.92 7/8 48 142000 106500 284000 15.9

3 48 154000 115500 308000 16.63 48 154000 115500 308000 16.63 48 154000 115500 308000 16.63 48 154000 115500 308000 16.63 48 154000 115500 308000 16.63 48 154000 115500 308000 16.63 1/8 64 164000 123000 328000 18.13 1/8 64 164000 123000 328000 18.13 1/8 64 164000 123000 328000 18.13 1/8 64 164000 123000 328000 18.13 1/8 64 164000 123000 328000 18.13 1/8 64 164000 123000 328000 18.13 1/4 64 178000 133500 356000 19.53 1/4 64 178000 133500 356000 19.53 1/4 64 178000 133500 356000 19.53 1/4 64 178000 133500 356000 19.53 1/4 64 178000 133500 356000 19.53 1/4 64 178000 133500 356000 19.53 3/8 72 190000 142500 380000 21.13 3/8 72 190000 142500 380000 21.13 3/8 72 190000 142500 380000 21.13 3/8 72 190000 142500 380000 21.13 3/8 72 190000 142500 380000 21.13 3/8 72 190000 142500 380000 21.13 1/2 72 204000 153000 480000 22.73 1/2 72 204000 153000 480000 22.73 1/2 72 204000 153000 480000 22.73 1/2 72 204000 153000 480000 22.73 1/2 72 204000 153000 480000 22.73 1/2 72 204000 153000 480000 22.73 3/4 80 230000 172500 460000 25.23 3/4 80 230000 172500 460000 25.23 3/4 80 230000 172500 460000 25.23 3/4 80 230000 172500 460000 25.23 3/4 80 230000 172500 460000 25.23 3/4 80 230000 172500 460000 25.2

4 90 260000 195000 520000 28.94 90 260000 195000 520000 28.94 90 260000 195000 520000 28.94 90 260000 195000 520000 28.94 90 260000 195000 520000 28.94 90 260000 195000 520000 28.94 90 260000 195000 520000 28.9

All wire rope used meets API specificationsFlemish splice high efficiency eyesXIP strength increases capacityCustomized to specificationsManufactured in accordance withASME B30.9 standardsAll Titan Supply slings are manufactured using Crosby sleeves

See wire rope technical data pagefor inspection & removal criteria

! WARNING

Wire Rope Slings

Standard Options

Sta

ndar

d E

ye

Thim

ble

Eye

Thim

ble

Eye

Rin

g

Thim

ble

Eye

S

afet

y H

ook

Han

d S

plic

e

Thim

ble

Eye

S

ling

Hoo

k

Saf

ety

Spl

ice

Rigging Products

WWW.TITANSUPPLY.CA 1

Tuff-Lift®

Rigging Products

SUPERIOR PRODUCTS, EXCEPTIONAL SERVICE2

Rated capacities for 3& 4 leg bridles assume a balanced load with weight equally distributed amongeach of the legs. In practice, this may not occur and one or more legs may carry a disproportionate share of the load. If this condition is likely to occur, a larger sling diameter may be required. ! WARNING

Wire Rope Slings

3 Leg Bridle Wire Rope Sling

Alloy Oblong Master Link

60° 45° 30° Dia.

1.1 0.92 0.65 1/2 3/4-A 1'3"

2.5 2 1.4 1/2 1-1/2-A 1'8"

1/2 4.4 3.6 2.5 3/4 3-A 2'

5/8 6.8 5.5 3.9 1 5-A 2'4"

3/4 9.7 7.9 5.6 1 7-A 2'9"

7/8 13 11 7.6 1-1/4 11-A 3'3"

1 17 14 9.8 1-1/2 11-A 3'6"

1-1/8 21 17 12 1-1/2 15-A 4'

1-1/4 26 21 15 1-3/4 15-A 4'6"

1-3/8 31 25 18 1-3/4 22-A 5'

1-1/2 37 30 21 2 22-A 5'6"

1-3/4 49 40 28 2-1/4 30-A 6'6"

2 63 52 37 2-1/2 37-A 8'

2-1/4 77 63 44 2-3/4 45-A 8'9"

Rope Dia.

Capacities (tons) (Angle to Horizontal)

Eye Hook

(tons)

Minimum Sling

Length

*Constructed of 6x19 or 6x36 XIP IWRC Wire Rope

1/4

3/8

1/2

5/8

3/4

7/8

1

1-1/8

1-1/4

1-3/8

1-1/2

1-3/4

2

2-1/4


60° 45° 30° Dia.

1/4 1.7 1.4 0.97 1/2 3/4-A 1'3"

3/8 3.7 3 2.2 3/4 1-1/2-A 1'8"

1/2 6.6 5.4 3.8 1 3-A 2'

5/8 10 8.3 5.9 1-1/4 5-A 2'4"

3/4 15 12 8.4 1-1/4 7-A 2'9"

7/8 20 16 11 1-1/2 11-A 3'3"

1 26 21 15 1-3/4 11-A 3'6"

1-1/8 31 26 18 1-3/4 15-A 4'

1-1/4 38 31 22 2 15-A 4'6"

1-3/8 46 38 27 2 22-A 5'

1-1/2 55 45 32 2-1/4 22-A 5'6"

1-3/4 74 60 42 2-3/4 30-A 6'6"

2 95 78 55 3-1/4 37-A 8'

2-1/4 116 94 67 3-3/4 45-A 8'9"

Rope Dia.Rope Dia.

1/4

3/8

1/2

5/8

3/4

7/8

1

1-1/8

1-1/4

1-3/8

1-1/2

1-3/4

2

2-1/4

Capacities in (tons) (Angle to Horizontal)

Eye Hook

(tons)

Minimum Sling

Length


Rope Dia.

1/4

3/8

1/2

5/8

3/4

7/8

1

1-1/8

1-1/4

1-3/8

1-1/2

1-3/4

2

2-1/4


60° 45° 30° Dia.

1/4 2.2 1.8 1.3 3/4 3/4A 1'3"

3/8 5 4.1 2.9 3/4 1-1/2A 1'8"

1/2 8.8 7.1 5.1 1 3-A 2'

5/8 14 11 7.8 1-1/4 5-A 2'4"

3/4 19 16 11 1-1/2 7-A 2'9"

7/8 26 21 15 1-3/4 11-A 3'3"

1 34 28 20 2 11-A 3'6"

1-1/8 42 34 24 2 15-A 4'

1-1/4 51 42 30 2-1/4 15-A 4'6"

1-3/8 62 50 36 (Pear Link) 2-3/4 22-A 5'

1-1/2 73 60 42 (Pear Link) 2-3/4 22-A 5'6"

1-3/4 98 80 57 (Pear Link) 2-3/4 30-A 6'6"

2 127 104 73 (Pear Link) 3-1/4 37-A 8'

Rope Dia.

Capacities (tons) (Angle to Horizontal)

Eye Hook

(tons)

Minimum Sling

Length


1/4

3/8

1/2

5/8

3/4

7/8

1

1-1/8

1-1/4

1-3/8

1-1/2

1-3/4

2



Rigging Products


Gator-Flex Slings®

Gator-Flex Grommets®

This sling has a nine-part body style with wires in the eyes that are crossed or interwoven so no wrapping is necessary. The sling was developed in conjunction with offshore oil company riggers who preferred a sling for heavy lifts that could be visually inspected and have the highest flexibility possible in a multi-part wire rope sling. The eyes are terminated in a hand-tucked-type of construction.

Gator-Flex GrommetsThese slings are endless for that short heavy lift connection. These slings can be made shorter than multi-part slings, but maintain all of the advantages. They are the most flexible grommets in the world.

GATOR-FLEX® GROMMETS (D/d = 5:1)Rated Capacity at 5:1 DF

Rigging Products


These slings provide the best combination of strength and flexibility. Because of the patented TRI-FLEX® SLING construction, there is a large savings in materialand machine costs in the larger sizes; this, combined with ease of use make TRI-FLEX® SLINGS the slings forsmart buyers.

This wire rope sling is an extremely flexible product with great applications for general rigging purposes in the transportation and distribution industry. It makes a fantastic choker sling especially when setting or removing utility poles. Development was through committee composed of utility company workers and members of the SLINGMAX design team. Actual field testing was used to determine merits of the final product.

Tri-Flex Slings®

T&D Ultra-Flex Wire Rope Slings™

T&D ULTRA-FLEX SLINGS TECHNICAL CHARTTM

NOTE: Vertical rated capacity is based on 5:1 Design Factor, EIP, IWRC or GAC.Bending radius of the sling body is 5:1 where D is the Pin or Load and d is the sling body.

D/d of loops: 1:1 where D is the pin and d is the sling body diameter.

PIN SIZE EQUALSD/d OF 1.5:1IN THE EYE

BASKET HITCH EQUALSD/d OF 5:1 USING

FINISHED DIAMETER

Rigging Products


Gator-Laid Slings®

Gator-Max Slings®

For heavy lifting work this is the most efficient wire rope sling that meets all industrial and regulatory standards. In this sling, eyes have the wires (6 ropes = 12 parts) laid in parallel. The eyes are terminated in a hand-tuck-type of construction, and then they are wrapped with heavy duty material to keep them in position. This sling was developed to meet conditions specified by the US Navy and the Wire Rope Technical Board Sling Manual. Testing has proven it to be the strongest multi-part wire rope sling when attached to small pins. The eye is terminated in a hand-tuck-type of construction. Another extremely flexible sling.

For heavy lifting work this is the most efficient wire rope sling that meets all industrial and regulatory standards.This sling and the Gator-Max® sling are identical except the Gator-Laid® sling has metal sleeves for the splice connection. This is the product when a big lift but shorter sling is required. It has twelve parts of wire rope in the loop. The Gator-Laid® products were developed in conjunction with the offshore oil industry to provide the world’s best heavy lift wire rope slings. This sling has great flexibility.

Gator-Laid Slings For heavy lifting work this is the most efficient Gator-Laid Slings For heavy lifting work this is the most efficient Gator-Laid Slingswire rope sling that meets all industrial and regulatory standards.This sling and the Gator-Max® sling are identical except

Gator-Max Slings

GATOR-LAID® SLINGS TECHNICAL CHART

NOTE: Rated capacity is based on 5:1 Design Factor.

NOTE: Rated capacity is based on 5:1 Design Factor.

GATOR-MAX® SLINGS TECHNICAL CHART



Type 3 & 4 (Eye & Eye) WIDTH

(in.) VERTICAL CHOKER BASKETVERTICAL CHOKER BASKETVERTICAL CHOKER BASKET APPROX. WT. (lbs./ft.)

Sin

gle

Ply

1 1600 1280 3200 0.061 1600 1280 3200 0.061 1600 1280 3200 0.061 1600 1280 3200 0.061 1600 1280 3200 0.062 3100 2480 6200 0.112 3100 2480 6200 0.112 3100 2480 6200 0.112 3100 2480 6200 0.112 3100 2480 6200 0.112 3100 2480 6200 0.113 4700 3760 9400 0.173 4700 3760 9400 0.173 4700 3760 9400 0.173 4700 3760 9400 0.173 4700 3760 9400 0.174 6200 4960 12400 0.234 6200 4960 12400 0.234 6200 4960 12400 0.234 6200 4960 12400 0.234 6200 4960 12400 0.234 6200 4960 12400 0.235 7800 6240 15600 0.275 7800 6240 15600 0.275 7800 6240 15600 0.275 7800 6240 15600 0.275 7800 6240 15600 0.276 9300 7440 18600 0.356 9300 7440 18600 0.356 9300 7440 18600 0.356 9300 7440 18600 0.356 9300 7440 18600 0.356 9300 7440 18600 0.358 11750 9400 23500 0.468 11750 9400 23500 0.468 11750 9400 23500 0.468 11750 9400 23500 0.468 11750 9400 23500 0.46

10 14700 11760 29400 0.5710 14700 11760 29400 0.5710 14700 11760 29400 0.5710 14700 11760 29400 0.5710 14700 11760 29400 0.5710 14700 11760 29400 0.5712 17600 14080 35200 0.7112 17600 14080 35200 0.7112 17600 14080 35200 0.7112 17600 14080 35200 0.7112 17600 14080 35200 0.71

Dou

ble

Ply

1 3100 2480 6200 0.111 3100 2480 6200 0.111 3100 2480 6200 0.111 3100 2480 6200 0.111 3100 2480 6200 0.111 3100 2480 6200 0.112 6200 4960 12400 0.212 6200 4960 12400 0.212 6200 4960 12400 0.212 6200 4960 12400 0.212 6200 4960 12400 0.213 8800 7040 17600 0.333 8800 7040 17600 0.333 8800 7040 17600 0.333 8800 7040 17600 0.333 8800 7040 17600 0.333 8800 7040 17600 0.334 11000 8800 22000 0.464 11000 8800 22000 0.464 11000 8800 22000 0.464 11000 8800 22000 0.464 11000 8800 22000 0.465 13700 10960 27400 0.535 13700 10960 27400 0.535 13700 10960 27400 0.535 13700 10960 27400 0.535 13700 10960 27400 0.535 13700 10960 27400 0.536 16500 13200 33000 0.696 16500 13200 33000 0.696 16500 13200 33000 0.696 16500 13200 33000 0.696 16500 13200 33000 0.698 22750 18200 45500 0.928 22750 18200 45500 0.928 22750 18200 45500 0.928 22750 18200 45500 0.928 22750 18200 45500 0.928 22750 18200 45500 0.92

10 28400 22720 56800 1.1310 28400 22720 56800 1.1310 28400 22720 56800 1.1310 28400 22720 56800 1.1310 28400 22720 56800 1.1312 34100 27280 68200 1.4212 34100 27280 68200 1.4212 34100 27280 68200 1.4212 34100 27280 68200 1.4212 34100 27280 68200 1.4212 34100 27280 68200 1.42

Type 5 (Endless) WIDTH

(in.) VERTICAL CHOKER BASKETVERTICAL CHOKER BASKETVERTICAL CHOKER BASKET APPROX. WT. (lbs./ft.)

Sin

gle

Ply

1 3200 2560 6400 0.113200 2560 6400 0.113200 2560 6400 0.113200 2560 6400 0.112 6200 4960 12400 0.216200 4960 12400 0.216200 4960 12400 0.216200 4960 12400 0.213 9400 7520 18800 0.339400 7520 18800 0.339400 7520 18800 0.339400 7520 18800 0.334 12400 9920 24800 0.4612400 9920 24800 0.4612400 9920 24800 0.4612400 9920 24800 0.465 15600 12480 31200 0.5315600 12480 31200 0.5315600 12480 31200 0.5315600 12480 31200 0.536 18600 14880 37200 0.6918600 14880 37200 0.6918600 14880 37200 0.6918600 14880 37200 0.698 21150 16920 42300 0.9221150 16920 42300 0.9221150 16920 42300 0.9221150 16920 42300 0.92

10 26450 21160 52900 1.1326450 21160 52900 1.1326450 21160 52900 1.1326450 21160 52900 1.1312 31750 25400 63500 1.4231750 25400 63500 1.4231750 25400 63500 1.4231750 25400 63500 1.42

Dou

ble

Ply

1 6200 4960 12400 0.226200 4960 12400 0.226200 4960 12400 0.226200 4960 12400 0.222 12400 9920 24800 0.4212400 9920 24800 0.4212400 9920 24800 0.4212400 9920 24800 0.423 17600 14080 35200 0.6617600 14080 35200 0.6617600 14080 35200 0.6617600 14080 35200 0.664 22000 17600 44000 0.9222000 17600 44000 0.9222000 17600 44000 0.9222000 17600 44000 0.925 27400 21920 54800 1.0627400 21920 54800 1.0627400 21920 54800 1.0627400 21920 54800 1.066 33000 26400 66000 1.3833000 26400 66000 1.3833000 26400 66000 1.3833000 26400 66000 1.388 42350 33880 84700 1.8442350 33880 84700 1.8442350 33880 84700 1.8442350 33880 84700 1.84

10 52900 42320 105800 2.2652900 42320 105800 2.2652900 42320 105800 2.2652900 42320 105800 2.2612 63500 50800 127000 2.8463500 50800 127000 2.8463500 50800 127000 2.8463500 50800 127000 2.84


Lightweight, pliable, and easy to handleOptional eye or endless configurations for various lifting equipmentNon-sparking feature allows for use in explosive atmospheresReinforced eyes for added durabilityHighly visible poly tag stands up to all working conditionsStocked in Polyester, available in nylon

All Tuff-Lift® Slings meet or exceed ASME B30.9 and WSTDA standards and regulations. Every sling is shipped with a Sling Safety Bulletin containing important information about the use of synthetic web slings.

Typically damage to a web sling starts along the edge and progresses across the webbing material. Specially coated threads are used on the edges of Diamond Edge Slings which can provide superior edge cut resistance, increasing sling life. Same features and benefits as standard web slings. Simply add a DE order code suffix to the Tuff-Lift® regular stock number to have your sling made with Polyester Diamond Edge webbing. Available in 1,2,3,4 and 6 inch widths.

Diamond Edge

Web SlingsTuff-Lift®

Tuff-Lift®

Tuff-Lift®


Tuff-Lift®

Superior flexibility and a low stretch construction ensures load gripNon-sparking feature allows for use in explosive atmospheresA durable polyester double cover protects loads and improves inspectabilityExclusive vertical weight load tagging system removes guess work from sling applicationsStrong, lightweight, and easy to handleWear point distribution extends sling life


CODE FLAG COLOR

JACKET COLOR VERTICAL CHOKER BASKETVERTICAL CHOKER BASKETVERTICAL CHOKER BASKET APPROX. WT.

(lbs./ft.)WIDTH

(in.)A3 PURPLE RED 3000 24003000 2400 6000 0.20 20.20 2A6 GREEN REDA6 GREEN REDA6 GREEN REDA6 GREEN REDA6 GREEN REDA6 GREEN RED 6000 4800 120006000 4800 120006000 4800 12000 0.45 20.45 2A9 YELLOW REDA9 YELLOW REDA9 YELLOW REDA9 YELLOW REDA9 YELLOW REDA9 YELLOW RED 9000 7200 180009000 7200 180009000 7200 18000 0.65 30.65 3A12 TAN RED 12000 9600 24000A12 TAN RED 12000 9600 24000A12 TAN RED 12000 9600 24000A12 TAN RED 12000 9600 24000A12 TAN RED 12000 9600 24000A12 TAN RED 12000 9600 24000A12 TAN RED 12000 9600 24000A12 TAN RED 12000 9600 24000A12 TAN RED 12000 9600 24000 0.75 30.75 3A14 RED RED 14000 11200 28000A14 RED RED 14000 11200 28000A14 RED RED 14000 11200 28000A14 RED RED 14000 11200 28000A14 RED RED 14000 11200 28000A14 RED RED 14000 11200 28000A14 RED RED 14000 11200 28000A14 RED RED 14000 11200 28000A14 RED RED 14000 11200 28000 0.80 30.80 3A17 WHITE RED 17000 13600 34000A17 WHITE RED 17000 13600 34000A17 WHITE RED 17000 13600 34000A17 WHITE RED 17000 13600 34000A17 WHITE RED 17000 13600 34000A17 WHITE RED 17000 13600 34000A17 WHITE RED 17000 13600 34000A17 WHITE RED 17000 13600 34000A17 WHITE RED 17000 13600 34000A17 WHITE RED 17000 13600 34000A17 WHITE RED 17000 13600 34000 0.90 30.90 3A23 BLUE RED 23000 18400 46000RED 23000 18400 46000RED 23000 18400 46000RED 23000 18400 46000 1.30 41.30 4A26 ORANGE RED 26000 20800 52000A26 ORANGE RED 26000 20800 52000A26 ORANGE RED 26000 20800 52000A26 ORANGE RED 26000 20800 52000A26 ORANGE RED 26000 20800 52000A26 ORANGE RED 26000 20800 52000A26 ORANGE RED 26000 20800 52000A26 ORANGE RED 26000 20800 52000A26 ORANGE RED 26000 20800 52000A26 ORANGE RED 26000 20800 52000A26 ORANGE RED 26000 20800 52000 1.50 41.50 4A32 ORANGE RED 32000 25600 64000A32 ORANGE RED 32000 25600 64000A32 ORANGE RED 32000 25600 64000A32 ORANGE RED 32000 25600 64000A32 ORANGE RED 32000 25600 64000A32 ORANGE RED 32000 25600 64000A32 ORANGE RED 32000 25600 64000A32 ORANGE RED 32000 25600 64000A32 ORANGE RED 32000 25600 64000 1.70 41.70 4A40 ORANGE RED 40000 32000 80000A40 ORANGE RED 40000 32000 80000A40 ORANGE RED 40000 32000 80000A40 ORANGE RED 40000 32000 80000A40 ORANGE RED 40000 32000 80000A40 ORANGE RED 40000 32000 80000A40 ORANGE RED 40000 32000 80000A40 ORANGE RED 40000 32000 80000A40 ORANGE RED 40000 32000 80000A40 ORANGE RED 40000 32000 80000A40 ORANGE RED 40000 32000 80000 1.90 41.90 4A54 ORANGE RED 54000 43200 108000A54 ORANGE RED 54000 43200 108000A54 ORANGE RED 54000 43200 108000A54 ORANGE RED 54000 43200 108000A54 ORANGE RED 54000 43200 108000A54 ORANGE RED 54000 43200 108000A54 ORANGE RED 54000 43200 108000A54 ORANGE RED 54000 43200 108000A54 ORANGE RED 54000 43200 108000A54 ORANGE RED 54000 43200 108000 2.10 52.10 5A68 ORANGE RED 68000 54400 136000A68 ORANGE RED 68000 54400 136000A68 ORANGE RED 68000 54400 136000A68 ORANGE RED 68000 54400 136000A68 ORANGE RED 68000 54400 136000A68 ORANGE RED 68000 54400 136000A68 ORANGE RED 68000 54400 136000A68 ORANGE RED 68000 54400 136000A68 ORANGE RED 68000 54400 136000A68 ORANGE RED 68000 54400 136000A68 ORANGE RED 68000 54400 136000A68 ORANGE RED 68000 54400 136000 2.50 52.50 5A70 ORANGE RED 70000 56000 140000A70 ORANGE RED 70000 56000 140000A70 ORANGE RED 70000 56000 140000A70 ORANGE RED 70000 56000 140000A70 ORANGE RED 70000 56000 140000A70 ORANGE RED 70000 56000 140000A70 ORANGE RED 70000 56000 140000A70 ORANGE RED 70000 56000 140000A70 ORANGE RED 70000 56000 140000A70 ORANGE RED 70000 56000 140000 2.90 52.90 5A90 ORANGE RED 90000 72000 180000A90 ORANGE RED 90000 72000 180000A90 ORANGE RED 90000 72000 180000A90 ORANGE RED 90000 72000 180000A90 ORANGE RED 90000 72000 180000A90 ORANGE RED 90000 72000 180000A90 ORANGE RED 90000 72000 180000A90 ORANGE RED 90000 72000 180000A90 ORANGE RED 90000 72000 180000A90 ORANGE RED 90000 72000 180000A90 ORANGE RED 90000 72000 180000A90 ORANGE RED 90000 72000 180000 3.50 63.50 6

ITANIGGING

RODUCTST

PR

Hooks & Shackles

BKB Safety Hook

Bolt Type Sling Shackle

S252

ChokerHookS287

Web SlingHook

WS320A

Hoist RingTo Web

HR125W

Web Sling Shackle

S281

HP SlingConnector

S238

See round sling technical data pagefor inspection & removal criteria

! WARNING

Round SlingsTuff-Lift®

Twin-Path Extra Sling with Covermax and K-Spec Core Yarn TPXC This is the world’s first truly ergonomic sling with Covermax® covers for superior abrasion resistance. These are made in sizes up to 600 tons vertical rated capacity. Larger capacity slings are available on special order. These slings have overload indicators, inner red cover, and are used worldwide in place of wire rope slings for heavy lifts. They are approximately 10% of the weight of a steel sling. These products are repairable. The Twin-Path® patented design provides the rigger with two connections between the hook and the load for redundant back-up protec-tion. These slings have less than 1% stretch at rated capacity. If ergonomics, productivity and safety are important, then these slings are the only choice. This is the lightest and strongest sling on the market today with K-Spec® – the longest lasting load bearing core yarn, backed by independent testing.

* Dimensions can vary according to the hardware or bearing points the slings are used with. Minimum is “tapered” width; Maximum is the �at tubing width. METRIC SLINGS AVAILABLE.

Check-Fast Inspection System (also known as the √ Fast System)

Patent #7,661,737 Foreign Patents Pending

The Check-Fast® System is designed to improve job-site safety. The √ Fast® Tag and External Warning Indicator (EWI) on a roundsling product provides for a pass/fail inspection of the internal load bearing core yarn. Damage to the core yarnfrom ultraviolet (UV) light degradation, fiber on fiber abrasion, fatigue, and severe overload can be detected. If the sling is mistakenly overloaded beyond rated capacity, the EWI is designed to disappear before the sling fails. The sling inspector now has a GO/NO-GO inspec-tion device rather than relying on a subjective hand-over-hand inspection to make an educated guess if the load bearing core yarns are in good condition. This safety system is available for High Performance K-Spec® Fiber Roundslings or polyester roundslings fabricated by authorized SLINGMAX® Dealers.

®

® ®

®


Twin-Path®


Eye Pad Body Pad Edge Guard Eye Sleeve Tube Sleeve

Synthetic Sling Protection

Synthetic Armor™ Pads

Web Padding

Abrasion Protection

Sling Protection

Tuff-Lift® SLINGMAXRIGGING SOLUTIONS

®

Shackle Pin PadsThe Shackle Pin Pad is the latest Slingmax Solution to the problem of sharp edges on the pin-side of a shackle. If you must rig a synthetic sling on the pin, protect it with a Shackle Pin Pad. This pad is easy to connect and easy to remove.

For extra protection for synthetic, wire rope, and chain slings, we have available an assort-ment of materials that we incorporate in our Synthetic Armor Pads. These are primarily for abrasion or wear protection. Not only will these wear pads keep the load from damaging the slings, but they will also protect the load from being scratched by the slings.

Tuff-Lift® Wear PadsThe Tuff-Lift® Wear Pad with Velcro closure provides for abrasion or wear protection. They will help keep the load from damaging the sling.

CornerMax® SleevesCornerMax® sleeves may look like traditional protection sleeves, but ours are made of Dyneema® fiber that is specially woven to provide cut protection for a variety of edges and surfaces. Most commonly used sleeve material cannot stop an edge from cutting the sleeve and possibly the sling too.

Magnetic Sling ProtectionMade of solid nylon, attaches with magnets, works with: Steel slings, Flat Web slings, and Round slings. 1/7th the weight of steel, no tools are needed since magnets allow for quick and easy attachment and removal. Available in nine inch, 12-inch and 18-inch models.

Tuff-Lift®

CornerMax® SleevesCornerMax® sleeves may look like traditional protection sleeves, but ours are made of Dyneema® fiber that is specially woven to provide cut protection for a variety of edges and surfaces. Most commonly used sleeve material cannot stop an edge from cutting the sleeve and possibly the sling too.

Synthetic Sling ProtectionTuff-Lift® Wear Pads® Wear Pads®The Tuff-Lift® Wear Pad with Velcro closure provides for abrasion or wear protection. They will help keep the load from damaging the sling.

SLINGMAXRIGGING SOLUTIONS

®

SLINGMAXRIGGING SOLUTIONS

®

CornerMax® Pad CornerMax pads create a “tunnel” of cut protection- a no-touch zone. Therefore, the edge does not come in contact with the pad or sling thus protecting the sling. Note that the sides of the load must completely support the pads in order to create and maintain the “tunnel”. SLINGMAX

RIGGING SOLUTIONS

®

Tuff-Lift®

WWW.TITANSUPPLY.CA

Eye Pad Body Pad

Web PaddingWeb PaddingTuff-Lift®

Chain Slings Information

Chain Slings

How to Order the Proper Chain Sling When ordering, please be sure to include the following:

Type of SlingS – Single ChainD – Double ChainT – Triple ChainQ – Quadruple Chain

Adjustable Styles:ASB – Single Style BADB – Double Style B

How to Select the Proper Chain1. Determine the maximum weight of LOAD.2. From the working load limit chart above, determine the SIZE of the body chain. Be sure to consider the effect of the angles.3. Determine the REACH for the selected angle by measuring the distance from the upper bearing surface of the master link to the bearing surface of the lower attachment.

Type of Master AttachmentO – Oblong LinkP – Pear LinkR – RingS – Sling HookG – Grab HookF – Foundry Hook

Type of End AttachmentO – Oblong LinkP – Pear LinkR – RingS – Sling HookG – Grab HookF – Foundry Hook

When ordering, please be sure to include the following:Sling

Inspection & TestingAlso Available!

See our Services section for more details.

CO SOS SOG SGS DOS ADOSSGG DOF DOG


Grade 80 Grade 100

SIZE (in.) VERTICAL

CHOKER 120°

or greater2 PART

60°3 PART

60°4 PART

60°

7/32 2500 2000 3600 6500 65007/32 2500 2000 3600 6500 65007/32 2500 2000 3600 6500 65007/32 2500 2000 3600 6500 65007/32 2500 2000 3600 6500 65007/32 2500 2000 3600 6500 6500

1/4 (9/32) 3500 2800 6100 9100 91003500 2800 6100 9100 91003500 2800 6100 9100 91003500 2800 6100 9100 91003500 2800 6100 9100 9100

5/16 45005/16 4500

3/8 7100 5680 12300 18400 184003/8 7100 5680 12300 18400 184003/8 7100 5680 12300 18400 184003/8 7100 5680 12300 18400 184003/8 7100 5680 12300 18400 184003/8 7100 5680 12300 18400 18400

1/2 12000 9600 20800 31200 312001/2 12000 9600 20800 31200 312001/2 12000 9600 20800 31200 312001/2 12000 9600 20800 31200 312001/2 12000 9600 20800 31200 312001/2 12000 9600 20800 31200 31200

5/8 18100 14480 31300 47000 470005/8 18100 14480 31300 47000 470005/8 18100 14480 31300 47000 470005/8 18100 14480 31300 47000 470005/8 18100 14480 31300 47000 470005/8 18100 14480 31300 47000 47000

3/4 28300 22640 49000 73500 735003/4 28300 22640 49000 73500 735003/4 28300 22640 49000 73500 735003/4 28300 22640 49000 73500 735003/4 28300 22640 49000 73500 735003/4 28300 22640 49000 73500 73500

7/8 34200 27360 59200 88900 889007/8 34200 27360 59200 88900 889007/8 34200 27360 59200 88900 889007/8 34200 27360 59200 88900 889007/8 34200 27360 59200 88900 889007/8 34200 27360 59200 88900 88900

1 47700 38160 82600 123900 1239001 47700 38160 82600 123900 1239001 47700 38160 82600 123900 1239001 47700 38160 82600 123900 1239001 47700 38160 82600 123900 1239001 47700 38160 82600 123900 123900

1 1/4 72300 57840 125200 187800 1878001 1/4 72300 57840 125200 187800 1878001 1/4 72300 57840 125200 187800 1878001 1/4 72300 57840 125200 187800 1878001 1/4 72300 57840 125200 187800 1878001 1/4 72300 57840 125200 187800 187800

SIZE (in.) VERTICAL

CHOKER 120°

or greater2 PART

60°3 PART

60°4 PART

60°

1/4 (9/32) 4300 3440 7400 11200 112004300 3440 7400 11200 112004300 3440 7400 11200 112004300 3440 7400 11200 112004300 3440 7400 11200 11200

5/16 5700 4560 9900 14800 148005/16 5700 4560 9900 14800 148005/16 5700 4560 9900 14800 148005/16 5700 4560 9900 14800 148005/16 5700 4560 9900 14800 148005/16 5700 4560 9900 14800 14800

3/8 8800 7040 15200 22900 229003/8 8800 7040 15200 22900 229003/8 8800 7040 15200 22900 229003/8 8800 7040 15200 22900 229003/8 8800 7040 15200 22900 229003/8 8800 7040 15200 22900 22900

1/2 15000 12000 26000 39000 390001/2 15000 12000 26000 39000 390001/2 15000 12000 26000 39000 390001/2 15000 12000 26000 39000 390001/2 15000 12000 26000 39000 390001/2 15000 12000 26000 39000 39000

5/8 22600 18080 39100 58700 587005/8 22600 18080 39100 58700 587005/8 22600 18080 39100 58700 587005/8 22600 18080 39100 58700 587005/8 22600 18080 39100 58700 587005/8 22600 18080 39100 58700 58700

3/4 35300 28240 61100 91700 917003/4 35300 28240 61100 91700 917003/4 35300 28240 61100 91700 917003/4 35300 28240 61100 91700 917003/4 35300 28240 61100 91700 917003/4 35300 28240 61100 91700 91700

7/8 42700 34160 74000 110900 1109007/8 42700 34160 74000 110900 1109007/8 42700 34160 74000 110900 1109007/8 42700 34160 74000 110900 1109007/8 42700 34160 74000 110900 1109007/8 42700 34160 74000 110900 110900

1 59700 47760 103400 155100 1551001 59700 47760 103400 155100 1551001 59700 47760 103400 155100 1551001 59700 47760 103400 155100 1551001 59700 47760 103400 155100 1551001 59700 47760 103400 155100 155100

1 1/4 90400 72320 153300 234900 2349001 1/4 90400 72320 153300 234900 2349001 1/4 90400 72320 153300 234900 2349001 1/4 90400 72320 153300 234900 2349001 1/4 90400 72320 153300 234900 2349001 1/4 90400 72320 153300 234900 234900


Tuff-Lift®

Chain Slings

Advantages

Chain Sling Options

GrabiQ - an all-inclusive chain sling system for coupling, shortening and lifting in Grade 100. The GrabiQ sling system is designed to improve and make your lifting as quick and easy as possible. The components are made from special quenched and tempered alloy steel, a guarantee for very high strength, low weight, high wear resistance and long life. All lifting components are uniformly marked with equivalent chain size, grade, manufactuers designation and name for positive identification.

2-Leg Adjustable Sling7 Top Fittings Needed

GrabiQ 2-Leg Adjustable SlingOnly 1 Top Fitting Needed

• Never more than 3 fittings at the top of the chain sling• True Grade 100 for increased capacity – About 25% more than Grade 80• Reduced sling weight in most cases• Reduced clutter to simplify rigging• Meets or exceeds all applicable standards of quality and safety• Built-in shortening pockets available for every leg• More flexibility for riggers• Quicker inspections• Distinctive colors to easily determine grade• Fewer bearing points for reduced wear and increased sling life

Chain Slings


Shackles


S209 G209Screw pin anchor shackles meet theperformance requirements of FederalSpecification RR-C-271D Type IVA,Grade A, Class 2, except for those

provisions required of the contractor.

Screw pin anchor shackles meet theperformance requirements of FederalSpecification RR-C-271D Type IVA,Grade B, Class 2, except for those

provisions required of the contractor.

Screw Pin Shackle

Alloy Screw Pin Shackle

G209A

Capacities 1/3 thru 55 metric tons.Forged - Quenched and Tempered, with alloy pins.Working Load Limit permanently shown on every shackle.Hot Dip galvanized or Self Colored.Shackles 25t and larger are RFID EQUIPPED.Shackles can be furnished proof tested with certificates to designated standards, such as ABS,DNV, Lloyds, or other certification. Charges for proof testing and certification available when requested at the time of order.Shackles are Quenched and Tempered and can meet DNV impact requirements of 42 joules at -20 C.Look for the Red Pin® the mark of genuine Crosby quality.Type Approval and certification in accordance with ABS 2006 Steel Vessel Rules 1-1-17.7, and ABS Guide for Certification of Cranes.Fatigue rated.

Capacities 2 thru 21 metric tons.Forged Alloy Steel - Quenched and Tempered, with alloy pins.Working Load Limit permanently shown on every shackle.Hot Dip Galvanized.Crosby products meet or exceed all requirements of ASME B30.26 including identification, ductility, design factor, proof load and temperature requirements. Importantly, Crosby products meet other critical performance requirements including Importantly, Crosby products meet other critical performance requirements including fatigue life, impact properties and material traceability, not addressed by ASME B30.26.Shackles can be furnished proof tested with certificates to designated standards, such as ABS, DNV, Lloyds, or other certification. Charges for proof testing and certification available when requested at the time of Charges for proof testing and certification available when requested at the time of order.

Shackles


S2130 G2130Bolt Type Anchor shackles with thin

head bolt - nut with cotter pin. Meets theperformance requirements of FederalSpecification RR-C-271D Type IVA,

Grade A, Class 3, except for those provisionsrequired of the contractor.

Bolt Type Anchor ShackleCapacities 1/3 thru 150 metric tons.Working Load Limit permanently shown on every shackle.Forged — Quenched and Tempered, with alloy pins.Hot Dip galvanized or Self Colored.Fatigue rated (1/3t - 55t).Shackles 25t and larger are RFID EQUIPPED.Crosby products meet or exceed all requirements of ASME B30.26 including identification, ductility, design factor, proof load and temperature requirements. Importantly, Crosby products meet other critical performance requirements including fatigue life, impact properties and material traceability, not addressed by ASME B30.26.Sizes 1/2t-25t meet the performance requirements of EN13889:2003.Shackles 55 metric tons and smaller can be furnished proof tested with certificates to designated standards, such as ABS, DNV, Lloyds, or other certification when requested at time of order.Shackles 85 metric tons and larger can be provided as follows: Non Destructive Tested Serialized Pin and Bow Material Certification (Chemical) Certification must be requested at time of order. Material Certification (Chemical) Certification must be requested at time of order.Look for the Red Pin®, the mark of genuine Crosby quality.Look for the Red Pin®, the mark of genuine Crosby quality.Type Approval and certification in accordance with ABS 2006 Steel Vessel Rules 1-1-17.7, Type Approval and certification in accordance with ABS 2006 Steel Vessel Rules 1-1-17.7, and ABS Guide for Certification of Cranes.

Wide Body ShackleAll sizes Quenched and Tempered for maximum strength.Forged alloy steel from 7 through 300 metric tons.Cast alloy steel from 400 through 1550 metric tons.Sizes 300 metric tons and smaller are proof tested to 2X the WLL.Sizes 400 metric tons and larger are tested to 1.33 times WLL.All ratings are in metric tons, embossed on side of bow.G-2160 bows are furnished Dimetcoted, and pins are Dimetcoted, then painted red.S-2160 bows and pins are painted red.Shackles, 30t and larger, are RFID EQUIPPED.Greatly improves life of wire rope slings.Can be used to connect HIGH STRENGTH Synthetic Web Slings, HIGH STRENGTH Synthetic Round Slings or Wire Rope Slings.Increase in shackle bow radius provides minimum 58% gain in sling bearing Increase in shackle bow radius provides minimum 58% gain in sling bearing surface and eliminates need for a thimble.Increases usable sling strength minimum of 15%.Pin is non-rotating, with weld-on handles for easier use (75t and larger).All 2160 shackles are individually proof tested & magnetic particle inspected Crosby certification available All 2160 shackles are individually proof tested & magnetic particle inspected Crosby certification available at time of order.Crosby products meet or exceed all requirements of ASME B30.26 including identification, ductility, design factor, Crosby products meet or exceed all requirements of ASME B30.26 including identification, ductility, design factor, proof load and temperature requirements. Importantly, Crosby products meet other critical performance requirements including fatigue life, impact properties and material traceability, not addressed by ASME B30.26.Shackles requiring ABS, Lloyds and other certifications are available upon special request and must be specified Shackles requiring ABS, Lloyds and other certifications are available upon special request and must be specified at time of order.Shackles 18t and larger have DNV Type Approval to Rules for Certification of Lifting Appliances, and are produced in Shackles 18t and larger have DNV Type Approval to Rules for Certification of Lifting Appliances, and are produced in accordance with DNV MSA requirements. Databook is provided that includes required documents. Serialization / Identification Material Testing (Physical / Chemical / Charpy) Proof Testing

S2160 G2160S2160 G2160

Shackles


SLINGHOOKS

GRABHOOKS

CLEVISSLIP

HOOKS

CLEVIS GRABHOOK

WIRE ROPECLIPS

OPEN SWAGE

SOCKETS

CLOSED SWAGE

SOCKETSSUPER

TERMINATOR

Swivel Hooks Shur-Loc®

Alloy Master Links

ALLOYBOLT TYPE

ANCHOR SHACKLES

BOLT TYPEANCHOR

SHACKLES

SCREW PINANCHOR

SHACKLES

SCREW PINANCHOR

SHACKLES

SWIVELHOOKS

SWIVEL HOOKS

WITH BEARING

SHUR-LOC®SWIVELHOOKS

SHUR-LOC®EYE

HOOKS

EYE HOIST HOOK

ALLOYMASTER

LINKS

ALLOYSUB ASSEMBLY

HOOK& HOOK

HOOK& EYE

EYE & EYE

JAW & EYE

JAW& JAW

Clevis HooksEye Type Hooks

UTILITYWEDGE

SOCKETS

WedgeSockets

Sling Savers

Wire RopeClipsTurnbuckles Spelter

Sockets

HAMMERLOK

Connecting Links EyeBolts Swivel Hoist Rings

SwagedSockets

SuperTerminators

Alloy Screw Pin Anchor Shackles

LOK-A-LOY DOUBLE CLEVIS LINK

Hardware


OPEN SPELTERSOCKETS

CLOSED SPELTER SOCKETS

WEB SLING SHACKLE

WEB CONNECTOR

CHOKER HOOK

Hoisting Equipment


Series 653 Lever Hoist

653The CM Series 653 Lever The CM Series 653 Lever

Operated Hoist features a short Operated Hoist features a short handle and minimal lever pull handle and minimal lever pull

effort combined with high effort combined with high quality, rugged, steel for close quality, rugged, steel for close quarter pulling, stretching, and quarter pulling, stretching, and

hoisting applications. hoisting applications.

The CM Series 657 Lever Operated Hoist features

through-hardened load chain and a short handle and a stamped steel ratchet lever for pulling,

stretching, and hoisting applications.

Rated load capacities of 3/4, 1-1/2, 3 and 6 tons, with 5, 10, 15 and 20 foot standard lifts. Rated load capacities of 3/4, 1-1/2, 3 and 6 tons, with 5, 10, 15 and 20 foot standard lifts. Optional Load Limiter alerts operator of a possible overload by allowing the handle to rotate without lifting the Optional Load Limiter alerts operator of a possible overload by allowing the handle to rotate without lifting the higher-than capacity load. The load limiter can be field-installed.higher-than capacity load. The load limiter can be field-installed.Impact resistant, stamped steel housing withstands rigorous use. Impact resistant, stamped steel housing withstands rigorous use. Compact design is portable and easy to rig.Compact design is portable and easy to rig.Double reduction gearing and short, cushioned-grip handle provide easy operation with minimal handle effort.Double reduction gearing and short, cushioned-grip handle provide easy operation with minimal handle effort.360° Rotating handle provides versatile rigging options when used in confined spaces.360° Rotating handle provides versatile rigging options when used in confined spaces.State-of-the-art free wheeling mechanism allows quick and easy one-handed take-up and positioning of slack chain.State-of-the-art free wheeling mechanism allows quick and easy one-handed take-up and positioning of slack chain.Enclosed screw-and-disc type load brake stays clean and dry for positive load positioning. Latches on hooks provide Enclosed screw-and-disc type load brake stays clean and dry for positive load positioning. Latches on hooks provide positive load engagement.positive load engagement.Shipyard hook available for 1-1/2 ton & 3 ton modelsShipyard hook available for 1-1/2 ton & 3 ton modelsLifetime WarrantyLifetime Warranty

657

Capacities from 3/4 to 6 tonsImpact resistant, stamped steel frame, gear case and cover for durability and light weight.Powder coated finish for added corrosion protection.Hardened steel load sharing gears.Double pawl arrangement for assured load control.Two chain guide rollers for positive chain engagement.Weston type braking system for positive load control and positioning.Simple one-handed, free chaining for fast load attachment.Hardened steel chain for strength and long wear life.Forged upper and lower hooks with heavy cast steel latches.Rubber handle grip for added operator comfort.Minimal maintenance with no special tools required.5-year warranty against defects in materials and workmanship.Metric rated.Meets ASME B30.21 - Manually Lever Operated Hoist Standard and European CE Standard.

Series 657 Lever Hoist

Hoisting Equipment


Puller- Series 640 Lever Hoist

Hurricane 360º Chain Hoist

The CM Puller is designed for The CM Puller is designed for heavy-duty construction and heavy-duty construction and

industrial applications. Used to industrial applications. Used to pull, lift, drag or stretch.pull, lift, drag or stretch.

640

The CM Series 622 Hand Chain Hoist features a simple, The CM Series 622 Hand Chain Hoist features a simple, efficient and economical design for easy installation and use. efficient and economical design for easy installation and use.

For the ultimate flexibility in a hand chain hoist, the CM Hurricane 360° is the choice for a wide range of applications. The patented hand chain cover rotates a full 360 degrees to allow loads to be lifted, pulled, or positioned from virtually any angle.

Simple, efficient, economical design Equipped with hardened load chain for flexibility and long wear Compact design, low headroom and lightweight steel construction for easy installation, even in confined spaces Weston-type load brake requires no lubrication Hand wheel cover with guide slots minimizes jamming and slipping Forged swivel hooks with latches reduce twisting of chain and unintentional unhooking of load when chain is slack Standard hand chain drop is 2 feet less than lift (example: 8 foot lift hoist has 6 foot hand chain drop) One-year warranty Metric rated Imported

Easy, one-hand operation and control — only 58 pounds of pull required for 3⁄4 ton model capacity Forged upper and lower hooks with latches standard Free wheeling for fast and easy attachment to load Upper and lower Latchlok hooks available for all capacities Optional Load Limiter protection device stops transmission of lever forces protecting against dangerous overload Optional anchor sling simplifies attachment to allow anchor hook to swivel in tight space

Optional Load Sentry warns of overload condition Optional zinc-plated chain available Unlimited lift Lifetime warranty Metric rated Made in U.S.A.

Tough aluminum alloy construction and powder coat finishWeatherproof for outdoor serviceSimple construction with fewer parts for ease of maintenance and lower inventoriesHoistaloy hardened steel link type load chain for strength, long wear life and flexibilityWeatherized Weston-type automatic braking system for positive load control

Series 622 Hand Chain Hoist

Hoisting Equipment


09003W

Screwlok Beam Clamp

Screwlok Shackled Beam Clamp

SC922

Designed to fit flanges of most structural beams Designed to fit flanges of most structural beams Act as a semi-permanent lifting point for use with manual or electric hoists Shackle incorporated for load suspension

Rated loads from 1-10 Ton.Reduced flange stress — Special clamp jaw design distributes load away from flange edge.Threaded mechanism fits securely on a wide range of flange widths and beam sizes.Low headroom provided by built-in suspension bar.

Hoisting Equipment


IPTKThis IPTK series beam clamp is suitablefor use as a temporary tackle eye for a

beam.

The IPBKZ beam clamp is used forlifting, transfer and stacking of I-Beams.An over-center hoist eye allows for the

beam flange to remain vertical. Thisseries of clamps can be used in the

vertical and horizontal moving, transferand stacking of different types of structural

designs, such as I-Beams, angles,etc, depending on the application

desired.

Crosby IPTK Beam Clamp

Crosby IPBKZ Plate Clamp

Available in capacities of 2 thru 25 metric tons.Wide variety of jaw openings available: 75 to 1020mm.Welded alloy steel body for strength and smaller size. Forged alloy components, where required.Individually Proof Tested to 2 times the Working Load Limit with certification.Company name (IP), logo, Working Load Limit and jaw opening permanently stamped on body.Each product is individually serialized, with Proof Load test date stamped on body. Serial number is included on the test certificate with maintenance and warranty logbook.Maintenance replacement parts are available.Manufactured by a ISO 9001 facility.All sizes are RFID EQUIPPED.

Available in capacities of .75 thru 3.75 metric tons.Wide variety of jaw openings available: 0 to 28mm.Welded alloy steel body for strength and smaller size. Forged alloy components, where required.Individually Proof Tested to 2 times the Working Load Limit with certification.Company name (IP), logo, WLL and jaw opening permanently stamped on body.Each product is individually serialized, with the serial number andProof Load test date stamped on body. Serial number is included on thetest certificate with maintenance and warranty logbook.Optional IP-5000 Stinger assembly available. Allows for easy connection between the clamp and hoist hook.Minimum WLL of 10% of Maximum WLL.Maintenance replacement parts are available.Manufactured by a ISO 9001 facility.All sizes are RFID EQUIPPED.

Hoisting Equipment


The IP10 vertical lifting clamp is used forthe lifting, turning, moving or vertical

transfer of sheet, plates, or fabricationsfrom horizontal to vertical and down tohorizontal (180°) as needed. Usually

used as a single point pick or when usedwith a spreader beam with multiple

vertical drop lines.

Crosby IP Plate Clamp

IP10

Available in capacities of .5 thru 30 metric tons (Higher Working Load Limits are available upon request).Wide variety of jaw openings available: 0" to 6.13".Welded alloy steel body for strength and smaller size. Forged alloy components, where required.Individually Proof Tested to 2 times the Working Load Limit with certification.Company name (IP), logo, Working Load Limit and jaw opening permanently stamped on body.Each product is individually serialized, with the serial number and Proof Load test date stamped on body. Serial number is included on the test certificate with maintenance and warranty logbook.Available in a variety of styles: IP10 - Standard clamp for materials with a surface hardness to 37Rc (345 HB). IP10J - Larger jaw opening. IP10S - For use with Stainless Steel material. IP10H - For use with materials with a surface hardness to 47Rc (450 HB).Full 180° turning range for material transfer, turning or moving.Lock open, lock closed ability with latch for pretension on material and then release of material.Optional IP-5000 Stinger assembly available, allows for easy connection between the clamp and hoist hook.Minimum WLL of 10% of Maximum WLL.Maintenance replacement kits are available.Manufactured by a ISO 9001 facility.All sizes are RFID EQUIPPED.

Hoisting Equipment


The IPHTONZ horizontallifting clamps are for use in the liftingand transfer in horizontal position of

non-sagging materials or of bundles ofnon-sagging material. These clamps

must be used in pairs or more.

Horizontal Lifting Clamp

IPHTONZ

Available in capacities of .75 thru 25 metric tons.Wide variety of jaw openings available: 0" to 4".Welded alloy steel body for strength and smaller size. Forged alloy components, where required.Individually Proof Tested to 2 times the Working Load Limit with certification.Company name (IP), logo, Working Load Limit and jaw opening permanently stamped on body.Each product is individually serialized, with the serial number and Proof Load test Each product is individually serialized, with the serial number and Proof Load test date stamped on body. Serial number is included on the test certificate with maintenance and warranty logbook.Maintenance replacement parts are available.Manufactured by a ISO 9001 facility.All sizes are RFID EQUIPPED.

Hoisting Equipment


Series 633 Wide Range Trolley

Corso Beam Trolley

3304

With endless chain drive PushingTrolleyTrolley

The CM Series 633 Wide Range Trolley features a The CM Series 633 Wide Range Trolley features a simple, rugged design built for trouble-free service

and ease of operation across a wide range of beam applications.

Rugged steel side plates formed to include bumpers and trolley guardsFrames connected by steel equalizer pin, secured by two nuts on each sideUniversal tread flanged trackwheels equipped with shielded ball bearingsEasy rolling on American standard shapes, wide flange shapes or patented railHardened wheels and axles for added strength and durabilitySpacer washers can be shifted inside or outside for easy adjustment to wide range of beamsSpacer washers can be shifted inside or outside for easy adjustment to wide range of beamsTo be used with hook suspended hoistSuspension plate for easy attachment is standardBearings prepacked with lifetime lubricantOne-year warrantyImported

Models from 250kg to 20t availableRolls on sealed-for-life ball bearingsEasy adjustment to the size of the steel beam using crankWide adjustment rangeBumper stop and derailment guardTipping guardMovement is achieved through pushingMovement is achieved through an endless chain driveMotorised movement

Models Code Models Code1 T 23339 Large 1T 1089292 T 23349 Large 2T 1089393 T 23359 Large 3 T 1089495 T 23369 Large 5 T 108959

With endless chain driveModels Code Models Code

0,5 T 23309 Large 0,5 T 1088791 T 23319 Large 1 T 1088892 T 23319 Large 2 T 1088993 T 23379 Large 3 T 1089095 T 23389 Large 5 T 10891910 T 56279

Pushing Trolley

Hoisting Equipment


The Caldwell Group

Adjustable Lifting Beam

Adjustable Spreader Beam

This is an adjustable spreader This is an adjustable spreader beam that provides a versatile beam that provides a versatile

solution for handling many solution for handling many different sized loads, ideal for different sized loads, ideal for

outdoor applications. outdoor applications.

Ideal where headroom is not limited.Adds stability to lift.Telescopic spread standard.Available with standard chain or wire rope rigging.Available with Adjust-A-Leg® rigging for off center load adjustment (minimum lifting capacity will be approximately 10-15% of beam rating).Wide range of additional sizes and capacities available.Complies with ASME standards.

3210610

Bail adjusts horizontally for lifting unbalanced loads.Bail adjusts horizontally for lifting unbalanced loads.Provides clearance in low headroom applications.Provides clearance in low headroom applications.Spread adjusts in 6" increments along lifting beam.Spread adjusts in 6" increments along lifting beam.Shackles included.Optional swivel hooks available.Complies with ASME standards.

Hoisting Equipment

24 SUPERIOR PRODUCTS, EXCEPTIONAL SERVICE

Schaefer Come Along5 foot liftChain diameter: 7/16” & 3/8"Mechanical load brake when liftingMechanical load brake when liftingSwivel hook with safety latchCan be used for lifting and pullingCan be used for lifting and pullingHardened forged steel hooks with heavy Hardened forged steel hooks with heavy duty latchesAlso known as chain type come-a-longsAlso known as chain type come-a-longsDouble pawl for maximum load controlDouble pawl for maximum load controlPositive load control with mechanical brakePositive load control with mechanical brakeSafety latches on both hooksCan be used at any angle

Tirfor Wire Rope Winch

Model No. T-7 T-13

Lifting Capacity 1700 lbs 3300 lbs

Pulling Capacity 2800 lbs 5500 lbs

Test to: 3300 lbs 6600 lbs

Length of Telescopic Handle 30” 41”

Wire Rope Size 5/16 in (8.3 mm) 7/16 in (11.1 mm)

Net Weight 17 lbs (8 kg) 48 lbs (22 kg)

T-35

6600 lbs

11000 lbs

13200 lbs

45”

5/8 in (16 mm)

61 lbs (27 kg)

The TIRMASTER is a light, powerful portable winching and hoisting unit that is easy to move and use. By

moving the telescopic handle up and down, the wire rope passes straight through the TIRMASTER as if were

hauled hand over hand, by means of two jaw blocks hauled hand over hand, by means of two jaw blocks inside the unit. This basic principle ensures maximum

safety as the load is automatically held secure. One set of jaws will not release until the other set takes the load.

Typical Uses: Typical Uses:Steel ErectingSuspended ScaffoldingCable TensioningCable TensioningDemolitionMoving MachineryFormwork Removal

Pipe LayingPolice & Fire Emergency WorkLoggingLoggingHuntingMoving Stuck 4 x4’sMoving Freight Cars

Features:Lightweight and SmallWire Rope is drawn straight through unit Wire Rope is drawn straight through unit for continuous usefor continuous useEquipped with Safety HookUnit can be used at any working degreeUnit can be used at any working degreeFastest transmission speed

661H 661S 7/16” 3/8”

• Cover: Cold rolled steel• Cover: Cold rolled steel• Chain material: 20MN2 premium alloy steel, black oxide, heat treated• Chain material: 20MN2 premium alloy steel, black oxide, heat treated

• Gear: Heat-treated, forged and milled carbon steel• Hook: Hardened, heat-treated and forged steel, oxide finish

Rigging Products


When you need to lift, pull or position with confidence, no one hasmore moving experience than Thern. From big to small, ourwinches and cranes make light work of your most challenging moves.

Known for reliability and performance, Thern cranes and winches are the first choice for industries ranging from aerospace to oil and gas, manufacturing to wastewater, marine to construction and beyond.

No matter how ordinary or unique your application, Thern has the perfect solution for you.

Permanent Lift Magnets are used in steel supply, machine, and die shops where heavy steel objects must be moved rapidly and safely.

The maximum rated lift is based upon lifting a clean, smooth, flat, low-carbon steel plate, 1.5" (38mm) or thicker with the full area of the magnet's lifting surface in contact with the load. Derating is required for plates with rust or scale, plates thinner than 1.5" and alloy steels.

Standard Features & Benefits Packed with the highest quality rare earth neodymium magnetic material High lift capacity Ease of operation Low weight ... easy to move No power consumption Handle locks in “On” or “Off” positions to prevent unintentional operation Meets all the requirements of ANSI/ASME B30.20 (safety standard) These Magnets can lift Round Bar, Pipe, and Flat Plates easily.

Titan Supply offers McKissick and Johnson Blocks for cranes and pickers. These specialized blocks are designed for various applications; ranging in single to multiple sheave designs with load ratings of 5 ton to 300 tons.

Blocks & Sheaves

Permanent Lift Magnets

Winches

Technical Data


ITANIGGING

RODUCTST

PR

D/d Factor Determines Stress on Wire RopeWhen a wire rope is bent around any sheave or other circular object, there is a loss of strength due to this bending action. As the D/d ratio becomes smaller, this loss of strength becomes greater and the rope becomes less efficient.

This curve, derived from actual test data, relates the efficiency of a rope to different D/d ratios. It is based on static loads only and applies to the 6×19 and 6×37 classes.

50

60

70

80

90

1002 6 10 14 18 22 26 30 34 38

D/d Ratio

Effic

ienc

yEf

ficie

ncy

Common Hitches Warning: Do not exceed working load limits.

Vertical

100% of single leg

Two Leg or Basket

200% of single leg

45-degree sling angle

70.7% of vertical basket

Choker

80% of single leg (75% for Wire Rope)


86.6% of vertical basket


50% of vertical basket

Angle of Choke

Angle of Choke Rated Capacity*Angle of Choke Rated Capacity*

> 120° 100% > 120° 100% 90° – 120° 87% 90° – 120° 87% 60° – 89° 74% 60° – 89° 74% 30° – 59° 62% 30° – 59° 62% < 30° < 30° 49%49%

* As a percentage of Choker rating* As a percentage of Choker rating

Effect of Temperature on Slings• •

• •

• •

• •

• •

Polyester Round Slings: Polyester Round Slings: Are not to be used in above 194°F Are not to be used in above 194°F (90°C) or below –40°F (–40°C).(90°C) or below –40°F (–40°C).

Web Slings: Web Slings: Are not to be used in above 194°F (90°C) or below Are not to be used in above 194°F (90°C) or below –40°F (–40°C).–40°F (–40°C).

IWRC Wire Rope Slings: IWRC Wire Rope Slings: Are not to be used in above 400°F Are not to be used in above 400°F (204°C) or below –40°F (–40°C) without consulting an Engineer.(204°C) or below –40°F (–40°C) without consulting an Engineer.

Alloy Chain Slings: Alloy Chain Slings: • • Alloy Chain Slings: • • Are not to be used in above 400°F (204°C) Are not to be used in above 400°F (204°C) or below –40°F (–40°C) without consulting an Engineer.or below –40°F (–40°C) without consulting an Engineer.

Twin-Path Slings:Twin-Path Slings: K-Spec & Polyester Core slings should not K-Spec & Polyester Core slings should not be exposed to temperatures above 180°F (82°C); however, cold-be exposed to temperatures above 180°F (82°C); however, cold-temperature exposure down to –40°F (–40°C) does not affect the temperature exposure down to –40°F (–40°C) does not affect the strength of the products.strength of the products.

®® K-Spec & Polyester Core slings should not K-Spec & Polyester Core slings should not ® K-Spec & Polyester Core slings should not K-Spec & Polyester Core slings should not

Technical Data


Removal Criteria as per ASME B30.9

Cautions & Warnings

Web SlingsA web sling shall be removed from service if the following are present:• Missing or illegible Sling Tag• Acid or Caustic Burns• Melting or charring of any part of the sling• Holes, tears, cuts, or snags• Broken, or worn stitching in load bearing splices• Excessive abrasive wear• Knots in any part of the sling• Discoloration and brittle or stiff areas on any part of the sling, which may mean chemical or ultraviolet/sunlight damage• Fittings that are pitted, corroded, cracked, bent, twisted, gouged, or broken• Other conditions, including visible damage, that cause doubt as to the continued use of the sling

Polyester Round & Twin-Path® Round SlingsA synthetic round sling shall be removed from service if the following are present:• Missing or illegible Sling Tag• Acid or Caustic Burns• Evidence of heat damage• Holes, tears, cuts, or snags that expose the core yarns• Broken or damaged core yarns• Weld splatter that exposes the core yarns• Round slings that are knotted• Discoloration and brittle or stiff areas on any part of the sling, which may mean chemical or ultraviolet/sunlight damage• Fittings that are pitted, corroded, cracked, bent, twisted, gouged, or broken• Other conditions, including visible damage, that cause doubt as to the continued use of the sling• Overload indicators are no longer visible (Twin-Path® only)

All ratings shown in this literature are based upon the items being in new or “as new” condition. Catalogue ratings are considered to be the greatest load that should be applied to the item; therefore, any shock loading must be considered when selecting the item for use in a system.

The products shown in this literature are subject to wear, misuse, overloading, corrosion, deformation, intentional alteration and other usage factors which may necessitate a reduction in the products’ Rated Capacity or a reduction in its Design Factor. Therefore, it is recommended that all products be regularly inspected to determine their condition as a basis for deciding if the product may continue to be used at the catalogue assigned WL, a reduced WL, a reduced design factor, or removed from service.

This literature does not take the place of Provincial and Federal Regulations, nor does it permit users to lift with rigging products that are without proper tagging or markings.

Visit the Titan Supply website for additional technical information and resources www.titansupply.ca

Wire Rope SlingsA wire rope sling shall be removed from service if the following are present:• Missing or illegible Sling Tag• Broken Wires (as per stated criteria below): – For Strand-laid & Single-part slings, 10 randomly distributed broken wires in one rope lay, or 5 broken wires in one strand in one rope lay – For Cable-laid slings, 20 broken wires per lay – For six-part braided slings, 20 broken wires per braid• Severe localized abrasion or scraping• Kinking, crushing, birdcaging, or any other damage resulting in damage to the rope structure• Evidence of heat damage• End attachments that are cracked, deformed, or worn to the extent that the strength of the sling is substantially affected• Severe corrosion of the rope, end attachments, or fittings• Other conditions, including visible damage, that cause doubt as to the continued use of the sling

Chain SlingsAn Alloy steel chain shall be removed from service if the following are present:• Missing or illegible Sling Tag• Cracks or breaks• Excessive wear, nicks, or gouges• Stretched chain links or components• Bent, twisted, or deformed chain links or components• Evidence of heat damage• Excessive pitting or corrosion• Lack of ability of chain or components to hinge (articulate) freely• Weld splatter• Other conditions, including visible damage, that cause doubt as to the continued use of the sling

Disclaimer:Please consult local and/or federal guidelines for occupational

laws that apply in the area where you are working.

Rigging Services


Features

Services

Micro-Trac

Inspect and proof test most rigging products right on siteCompletely self enclosed and powered by onboard generatorTest Certificates available immediately150,000 lb Proof Test capacityEach item is thoroughly inspected per OSHA, ASME, Industry Standards and/or manufacturer recommendation30 ft. bed with 20 ft. Pin to Pin Pull and a 3/8” to 2” Wire Rope Gripper for added length capabilities

Repair Service

Recertification Service

Inspection Service

Fabrication

Load Testing

Online Test Certs

On-Site Inspections

Online Inspection Certs

Online Test Certificate



Fabrication

Online Inspection Certs

Load Testing

RFID based tracking system that will allow rigging users easier compliance checks, improved inspection scheduling, provide better accuracy, with more efficient inspections reducing labour costs and liabilities.

Titan Supply LP has qualified technicians available to inspect any Wire Rope, Chain or Synthetic Rigging product that requires inspection.Each item is thoroughly inspected per OSHA, ASME, industry standards and/or manufacturer recommendation and a detailed summary sheet providing the condition and recommendation for use or removal is provided.

We have the capability to proof test all equipment that has passed the visual inspection process and documentation is provided.

ITANIGGING

ERVICEST

SR

Our qualified technicians can thoroughly inspect and repair all brands of synthetic, wire rope and chain slings as well as all makes of hoisting equipment and components inspected to ASME, ANSI, API 9A, industry standards and/or manufacturer require-ments. All repairs are completed by qualified staff with proof testing done to twice their working load limit as per ASME standards. A document is provided with test results and certification.

TRS Mobile Test Unit

Western Canada’s First ever on-site inspection and repair service.

Completely self enclosed and powered by onboard generator

Each item is thoroughly inspected per OSHA, ASME, Industry

30 ft. bed with 20 ft. Pin to Pin Pull and a 3/8” to 2” Wire Rope

Inspection ServiceTitan Supply LP has qualified technicians available to

TRS Mobile Test Unit

Western Canada’s First ever on-site inspection and repair service.

Titan Rigging Services can perform proof load and destruction testing on most types of rigging equipment. All of our Proof Test Beds are calibrated to ASME E4 standards, and our qualified technicians test according to industry standards and guidelines. Our largest Test Bed is capable of testing to 1.2 million lbs of pulling force. We store and provide written load test reports and certification documents.

Rigging Services


Training and SeminarsTitan Supply LP offers various seminars covering topics such as; rigging principles, current rigging standards, inspection requirements, basic sling hitches and working with various rigging equipment.

These seminars are available at your facility or you can take advantage of our fully equipped facility.

We offer written tests to help evaluate attendees understanding of topics presented, and as well provide supporting reference materials.supporting reference materials.

Resource MaterialsTitan Supply LP offers an extensive on hand library of available for purchase Resource Materials to suit your evey need. From our very own Titan Supply LP pocket charts, wall charts and inspection posters, to all different sizes of inspection manuals, videos, and even a complete series for Rigging Workshops.

Our Resource Material is perfect for your toolbox talks, safety meetings, and even for classroom settings.

Please visit us online or contact one of our locations today to find out more!

www.titansupply.ca

Titan Supply LP Wall Chart

Titan Supply LP Inspection Chart- Chain & Wire

Rope Slings

Titan Supply LP Inspection Chart- All Slings

Titan Supply LP Inspection Chart- Round

& Synthetic Slings

Titan Supply LP Pocket Card

www.titansupply.ca

Edmonton (Head Office)5303-75 StreetEdmonton, AB T6E 5S5Phone: 780-481-1122Fax: 780-481-1503

Red DeerBay 3, 8068 Edgar Industrial CrescentRed Deer, AB T4P 3R3Phone: 403-340-3620Fax: 403-340-8370

Grande Prairie#112, 6901-98 StreetClairmont, AB T0H 0W0Phone: 780-539-7316Fax: 780-538-1844

Calgary4155-75 Avenue SECalgary, AB T2C 2K8Phone: 403-236-1262Fax: 403-236-5200

Titan Supply Rigging Products Catalogue

Documents

slings tufflift chain

grabiq chain slings

tufflift diamond edge

twinpath slings

gatorflex grommets

chain hoists

td ultraflex

abrasion protection