Wedgelock Equipment Limited • 72 Montgomery Crescent, Upper Hutt 5018, NEW ZEALAND NZ 0800 424 482 • AUS 1800 731 757 • [email protected]• www.wedgelock.com Tilt Coupler U P T O 1 8 0 º with from The I-LOCK TILT COUPLER for excavators The world’s only dual locking coupler that offers TOTAL SAFETY in LESS THAN A SECOND! by For excavators up to 20T Patents apply. For details, see our website.
2
Embed
Tilt Coupler - Wedgelock Attachments | Superior in … TILT COUPLER BROCHURE.pdfHEALC PowerTilt Rotary Actuator Circuit Pressure Range - 250-260 Bar (applies to all models) *I-Lock
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
HEALC PowerTilt Rotary Actuator Circuit Pressure Range - 250-260 Bar (applies to all models)
*I-Lock Tilt Coupler models from 028 to 210 are designed with multi-model capability. This will enable the operator to connect to an array of attachments in the same weight class. Compatibility is subject to attachment design and specification. For further information please refer to C2 specification sheets 900-* or contact your nearest Wedgelock Dealer.Complies with the following standards/position papers: AS4772-2008, EN474, NSW WorkCover Position Paper for Quick Hitches, NZ WorkSafe Best Practices 5.10.3Specifications are subject to change without notice. All images used are representative only and may differ from actual product.
I-Lock Tilt Coupler Range
930-
000-
4 R-
0
Tilt Couplerfrom
www.wedgelock.com
INSTANT SAfeTy KNucKleAutomatically secures the attachment to the coupler the instant the front jaw comes into contact with the first pin. The instant locking eliminates the risk of losing control of the attachment during the “high risk” latching phase. This extremely important safety feature is unique to I-Lock.
PrImAry WedgeThe engagement system incorporates the proven “Wedge Locking Principle” for the primary wedge, increasing the locking integrity ensuring both attachment pins remain locked and secure.
cHecK VAlVeIntegrated within the primary cylinder the check valve prevents disengagement of the wedge in the event of reduction or loss of the engagement force.
AudIble WArNINg buzzer
Variable tones controlled by the ICS deliver a clear signal assisting the operator throughout the attachment change.
TWO lINe cIrcuIT (fOr THe cOuPler)The built-in ICS (I-Lock Control System) enables enhanced functionality of the I-Lock Tilt Coupler, retaining the Instant Locking with a single switch and two hydraulic lines.
TIlT TecHNOlOgyWorld renowned POWERTILT from Helac. Enhancing productivity through better precision and control.
TIme-OuT fuNcTIONThe ICS automatically resets the Instant Safety Knuckle to the locked position, placing the coupler into safe mode.
mulTI mOdel™Enables operators to connect to an array of attachments within the same weight class.
The I-Lock Tilt Coupler with ICS delivers maximum safety without compromise: