Brisbane Australia Tidal Fluid Power Corporate Brochure
Key Products
Single Vane MotorsT25M - T50M48 - 311cc/revUp to 175 bar
Medium Duty Vane PumpsSingle and DoubleT25VQ - T45VQ18 - 194cc/revUp to 210 Bar
Low Pressure Vane PumpsTVTM, TV10 & TV203-43cc/revUp to 175 Bar
Tidal Variable Piston PumpTPV33 Double Pump
Bent Axis Piston Pumps and MotorsSC, SCM & SCP12-130cc/rev160-500cc/revUp to 350 bar (400 bar)
Proportional ValvePV-4 SeriesMax Pressure 350 bar
Single Vane MotorsVM3 & VM4Medium Pressure Range9 - 222cc/revUp to 230 Bar
Single, Double and TripleHigh Pressure Vane PumpsVT6 & VT76 - 270cc/revUp to 320 Bar
Open Circuit Piston PumpsTPV-1180, 11, 130, 140 & 190cc/revUp to 350 Bar (400 Bar)
Open Circuit Piston PumpsTPV-1 & TPV-218-140cc/revUp to 280bar (350 bar)
Tidal Fluid Power TPV-1 and TPV-2 open circuit piston pumps are sourced fromChina's leading manufacturers.
drive configuration. Offering 6 displacement sizes of 18, 28, 45, 71, 100 and140cc/rev with pressures of 280 bar continuous and 350 bar intermittent. Controller types range from load sensing, and remote pressure control to HPcontrol and the basic pressure compensated control.
TPV-11 open circuit piston pumps are 350 bar continuous rated in displacementsizes 80, 112, 130, 140 & 190cc/rev.
Pumps are assembled and tested in Clontarf, Brisbane.
This product is available with SAE mounting and through drive and non through
Managing Director Steve Rees
Sales Manager Stephane Pieplu
Internal Sales Danny Dunsdon
New South Wales Jim Jennings
Vic/Tas Mike Wallner
WA/SA Ross Scott
Northern Territory
Q1/Q3 Stephane Pieplu
Q2 Luke Bubb
Repair Centre Manager
Luke Bubb
Tech 2 Apprentice Chris James
Tech 1 Jeremy Jackson
Repairs/Sales Luke Bubb
Logistics Manager Steve Rees
Storeman Simon Davis
Assistant
Financial Controller Tania Howard
Accounts Receivable Dawn Rees
Accounts Payable Tania Howard
Repair Centre Accounts
General Manager Tania Howard
In 2008, Tidal Fluid Power acquired the property at Unit 3, 15 RedcliffeGardens Drive, Clontarf so as to develop a Piston Pump Repair Centre. This project is now complete and fully operational, just awaiting the arrival of our new Test Rig.
The fitout was completed in July 2012 and includes 2 x 500kg Bridge Cranes,4 x Assembly work stations, High Pressure cleaning booth, Parts Washing, Multi station stripdown bench and a Spray Painting Booth.
Also incorporated in the Repair Centre is the TPV-1 and TPV-2 new pumpassembly bench. This is where all TPV-1 and TPV-2 pumps are built tomeet the Australian market. EAch pump is tested prior to shipment.
SAME AS LAST VERSION OF COVER
Phone: 1800 084325 Fax: 07 3889 5921Email: [email protected]: www.tidalfluidpower.com.au