Shopping per mouseclick www.rct-online.de THOMAPLAST ® IV Fastening Elements Spacer Elements Bushings Insulating Spacers / Insulators Closure Elements Caps and Plugs O-Rings Solid and Encapsulated Reichelt Chemietechnik ’15 Reichelt Chemietechnik GmbH + Co.
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
General product specification• Very good alternative to metal parts• Very large application area due to universal application possibilities• Shock-absorbing and vibration-damping• Light, resistant to vibration, easy maintenance• Preferably used in electronics due to their dielectrical properties• Available in the most common sizes• Chemical features:
Resistant to aromatic and aliphatic hydrocarbons, fuels, mineral oils and mineral lubricants; suitable for alcohols, esters, ketones, ethers and amines; good resistance to weak alkalis, but only moderate resis-tance to strong alkalis; limited resistance to weak mineral and organic acids; not resistant to oxidizing acids, strong mineral and organic acids as well as phenols; limited resistance to hydrolysis
• Material specification:Polyamide is an elastic, tough, loadable, but notch-sensitive materialImpact resistantResistant to abrasion and coldHigh fatigue strength and excellent resilienceHigh wear resistance and good mechanical damping capacityInsulating properties and an amazingly high tensile strengthConnecting parts made of polyamide and similar plastics protect from rust and corrosion damagePolyamide can also be used in the food processing industry and in medical fieldsPA 6 features a higher impact resistance compared to PA 6.6PA 6 has the highest water absorption of all common plastics up to 9 to 10 % (followed by PA 6.6 with 8 to 9 %), thus considerably increa-sed toughness, flexibility and elongation. However, the strength of the material can therefore be reduced by up to 10%.
General technical specification• Material: PA 6 (polyamide 6)• Colour: natural• Density: approx. 1.14 g/cm3
• Temperature range: -40 to +85 °C, for a short time +180 °C• Melting temperature: +220 °C (ISO 11357)• Yield stress: 75 MPa (ISO 527)• Elongation at break: >50 % (ISO 527)• Elastic modulus: 3,200 MPa (ISO 527)• Impact resistance: without break (DIN 53453)• Notch impact strength (Charpy): >3 kJ/m2 (ISO 179)• Ball pressure hardness: 160 N/mm2 (ISO 2039-1)• Shore hardness D: 82° (DIN 53505)• Dielectric strength: 20 kV/mm (IEC 60243)• Dielectric constant: 3.9 at 50 Hz (IEC 60250)• Surface resistance: 1013 Ohm (IEC 60093)• Volume resistivity: 1015 Ohm x cm (IEC 60093)• Comparative tracking index (CTI): >600 (DIN 53480)• Dielectric loss factor (at 50 Hz): 0.02 (specimen dry)• Water absorption: up to 10 % (during storage in water) (DIN 53472)• Flammability rating: UL 94 HB
THOMAPLAST®-Spacer made of PA (I-Ø: 2.6 mm)
Technical specification• Material: PA 6 (polyamide 6)• Colour: natural
THOMAPLAST®-Spacer made of PA - glass fibre-reinforced (M2.5 - M4)
Product specification• Chemical features:
Good resistance to mineral lubricants, aromatic and aliphatic hydrocar-bons, gasoline, trichloroethylene, perchloroethylene, acetone and alcohols
• Resistance to weather: medium resistance by UV light and weather• Material specification:
Glass fibre reinforced polyamides have excellent impact resistance combined with a high stiffness and strength, extremely robust to mechanical load, suitable for heavy-duty and power transmission applications
Technical specification• Material: PA 6, glass fibre reinforced (25 %)• Colour: black• Density: 1.32 g/cm3 (ISO 1183)• Temperature range: -40 to +110 °C, for a short time +200 °C• Tensile strength: 170 - 100 MPa (ISO 527)• Bending strength: 220 - 180 MPa (ISO 178)• Elongation at break: 3 - 5 % (dry / humid) (ISO 527)• Elastic modulus: 8,000 MPa• Bending stress: 5,000 N/mm2
• Impact resistance (Charpy): 80 kJ/m2 (ISO 179-1 eU)• Ball pressure hardness: 210 MPa (ISO 2039-1)• Notch impact strength (Izod): 12 kJ/m2 (ISO 180-1 A)• Melting point: +220 °C (ISO 11357)• Water absorption: 2.3 % (ISO 62)• Dielectric strength: 80 - 30 kV/mm (IEC 60243-1)• Volume resistivity: 1013 - 1010 Ohm x m (dry / humid) (IEC 60093)• Surface resistance: 1012 - 1010 Ohm (dry / humid) (IEC 60093)• Comparative track. index (CTI): 450 (IEC 60112)
Product specification• Spacers with very high stability and smooth, bright surface• Rigid, impact resistant and unbreakable• Inflame and extinguish after removal of the ignition source, burn
smoking (smell of phenol)• Chemical features:• Resistant to many organic acids, mineral acids of high concentration,
oxidants and reducing agents, fats and oils, neutral and acidic salt solutions, aliphatic and cycloaliphatic hydrocarbons and alcohols, except methanol
Technical specification• Material: PC (polycarbonate)• Colour: white• Density: 1.2 g/cm3 (DIN 53479)• Temperature range: -100 to +135 °C (continuous use in the air)• Elastic modulus: 2,200 - 2,400 N/mm2 (DIN 53457)• Tensile strength: 55 - 75 N/mm2
• Pressure resistance: >80 N/mm2
• Ball pressure hardness: 100 - 110 N/mm2 (30-sec. value, DIN 53456)• Rockwell hardness R: 118 - 125 MPa (ASTM D 785)• Impact resistance: at +20 °C: without break,
at +100 °C: without break (DIN 53453)• Notch impact strength: at +20 °C: 20 - 30 kJ/m2,
at -40 °C: 10 - 15 kJ/m2 (DIN 53453)• Notch impact strength (Izod): 900 J/m2 (ISO 180-4 A)• Thermal conductivity: 0.21 W/m x K (DIN 5261)• Flammability rating: UL 94• Dielectric strength: 35 kV/mm (DIN 53481)• Volume resistivity: >1017 Ohm x cm (DIN 53482)• Surface resistance: >1015 Ohm (DIN 53482)• Comparative track. index (CTI): 255 - 300 (DIN 53480)• Dielectric constant: 2.9 at 1 MHz (DIN 53483)
Product specification• Very good electrical insulating capacity• Main fields of application: all kinds of low voltage insulators and
insulating parts, particularly high frequency technology• High mechanical stability• High volume resistivity up to +1,000 °C• Tracking resistant, non-combustible• Small loss factor• Good resistance to aging and weather• Suitable for food• Chemical features: Very high resistance to chemicals
Product specification• Dimensionally stable and impact resistant• UV light and weather: medium resistance• Chemical features:
Well suited for use with mineral lubricants, aromatic and aliphatic hydrocarbons, gasoline, trichloroethylene, perchloroethylene, acetone and alcohols
Technical specification• Material: PA 6 (polyamide 6)• Colour: white• Density: 1.14 g/cm3 (ISO 1183)• Temperature range: -40 to +90 °C, for a short time +180 °C• Yield stress: 80 - 50 MPa (dry / humid) (ISO 527)• Elongation at break: 70 - 200 % (dry / humid) (ISO 527)• Elastic modulus: 3,000 - 1,500 MPa (dry / humid)• Impact resistance (Charpy): 5 - 35 kJ/m2 (dry / humid) (ISO 179/1A)• Ball pressure hardness: 150 - 70 MPa (dry / humid) (ISO 2039-1)• Notch impact strength (Izod): 5.5 kJ/m2 (ISO 180/1A)• Melting point: +220 °C (ISO 11357)• Water absorption: 3.0 % (ISO 62)• Dielectric strength: approx. 60 kV/mm at 0.6 mm thickness
(IEC 60243-1)• Volume resistivity: 1013 - 1010 Ohm x m (IEC 60093)• Surface resistance: 1013 - 1010 Ohm (dry / humid) (IEC 60093)• Comparative track. index (CTI): 600 (IEC 60112)• Flammability rating: UL 94 HB (at 1.47 mm thickness)
Item Internal thread
P1 P2 L D Unit Price
mm mm mm mm piece EURO
339279 M2.5 x 0.45 2.5 2.5 5 5 10 78.00339280 M2.5 x 0.45 2.5 2.5 5 5 25 164.00339281 M2.5 x 0.45 4 4 8 5 10 78.00339282 M2.5 x 0.45 4 4 8 5 25 164.00339283 M2.5 x 0.45 5 5 10 5 10 78.00339284 M2.5 x 0.45 5 5 10 5 25 164.00339285 M2.5 x 0.45 6 6 12 5 10 86.00339286 M2.5 x 0.45 6 6 12 5 25 180.00339287 M2.5 x 0.45 7.5 7.5 15 5 10 86.00339288 M2.5 x 0.45 7.5 7.5 15 5 25 180.00339289 M2.5 x 0.45 8.5 8.5 18 5 10 86.00339290 M2.5 x 0.45 8.5 8.5 18 5 25 180.00339291 M2.5 x 0.45 9.5 9.5 20 5 10 86.00339292 M2.5 x 0.45 9.5 9.5 20 5 25 180.00339293 M2.5 x 0.45 10 10 25 5 10 98.00339294 M2.5 x 0.45 10 10 25 5 25 210.00339295 M2.5 x 0.45 10 10 30 5 10 98.00339296 M2.5 x 0.45 10 10 30 5 25 210.00
Item Internal thread
P1 P2 L D Unit Price
mm mm mm mm piece EURO
339297 M2.5 x 0.45 10 10 35 5 5 64.00339298 M2.5 x 0.45 10 10 35 5 15 162.00339299 M2.5 x 0.45 10 10 40 5 5 64.00339300 M2.5 x 0.45 10 10 40 5 15 162.00339301 M2.5 x 0.45 10 10 45 5 5 64.00339302 M2.5 x 0.45 10 10 45 5 15 162.00339303 M3 x 0.5 2.5 2.5 5 6 10 50.00339304 M3 x 0.5 2.5 2.5 5 6 25 114.00339305 M3 x 0.5 4 4 8 6 10 50.00339306 M3 x 0.5 4 4 8 6 25 114.00339307 M3 x 0.5 5 5 10 6 10 50.00339308 M3 x 0.5 5 5 10 6 25 114.00339309 M3 x 0.5 6 6 12 6 10 52.00339310 M3 x 0.5 6 6 12 6 25 122.00339311 M3 x 0.5 7.5 7.5 15 6 10 52.00339312 M3 x 0.5 7.5 7.5 15 6 25 122.00339313 M3 x 0.5 8.5 8.5 18 6 10 62.00339314 M3 x 0.5 8.5 8.5 18 6 25 144.00339315 M3 x 0.5 9.5 9.5 20 6 10 62.00339316 M3 x 0.5 9.5 9.5 20 6 25 144.00339317 M3 x 0.5 10 10 25 6 10 82.00339318 M3 x 0.5 10 10 25 6 25 174.00339319 M3 x 0.5 10 10 30 6 10 82.00339320 M3 x 0.5 10 10 30 6 25 174.00339321 M3 x 0.5 10 10 35 6 10 86.00339322 M3 x 0.5 10 10 35 6 25 188.00339323 M3 x 0.5 10 10 40 6 10 86.00339324 M3 x 0.5 10 10 40 6 25 188.00339325 M3 x 0.5 10 10 45 6 10 92.00339326 M3 x 0.5 10 10 45 6 25 192.00339327 M3 x 0.5 10 10 50 6 10 92.00339328 M3 x 0.5 10 10 50 6 25 192.00339329 M3 x 0.5 10 10 55 6 5 62.00339330 M3 x 0.5 10 10 55 6 15 156.00339331 M3 x 0.5 10 10 60 6 5 62.00339332 M3 x 0.5 10 10 60 6 15 156.00339333 M4 x 0.7 2.5 2.5 5 8 10 66.00339334 M4 x 0.7 2.5 2.5 5 8 25 142.00339335 M4 x 0.7 4 4 8 8 10 66.00339336 M4 x 0.7 4 4 8 8 25 142.00339337 M4 x 0.7 5 5 10 8 10 66.00339338 M4 x 0.7 5 5 10 8 25 142.00339339 M4 x 0.7 6 6 12 8 10 66.00339340 M4 x 0.7 6 6 12 8 25 142.00339341 M4 x 0.7 7.5 7.5 15 8 10 68.00339342 M4 x 0.7 7.5 7.5 15 8 25 144.00339343 M4 x 0.7 9 9 18 8 10 70.00339344 M4 x 0.7 9 9 18 8 25 148.00339345 M4 x 0.7 10 10 20 8 10 70.00339346 M4 x 0.7 10 10 20 8 25 148.00339347 M4 x 0.7 10 10 25 8 10 90.00339348 M4 x 0.7 10 10 25 8 25 174.00339349 M4 x 0.7 10 10 30 8 10 92.00339350 M4 x 0.7 10 10 30 8 25 190.00339351 M4 x 0.7 10 10 35 8 10 58.00
THOMAPLAST® IV - 2015 27
Fastening Elements Spacer Elements
Item Internal thread
P1 P2 L D Unit Price
mm mm mm mm piece EURO
339352 M4 x 0.7 10 10 35 8 25 148.00339353 M4 x 0.7 10 10 40 8 5 58.00339354 M4 x 0.7 10 10 40 8 15 148.00339355 M4 x 0.7 10 10 45 8 5 58.00339356 M4 x 0.7 10 10 45 8 15 148.00339357 M4 x 0.7 10 10 50 8 5 58.00339358 M4 x 0.7 10 10 50 8 15 148.00339359 M4 x 0.7 10 10 55 8 5 68.00339360 M4 x 0.7 10 10 55 8 15 170.00339361 M4 x 0.7 10 10 60 8 5 70.00339362 M4 x 0.7 10 10 60 8 15 176.00339363 M4 x 0.7 10 10 65 8 5 70.00339364 M4 x 0.7 10 10 65 8 15 176.00
THOMAPLAST®-Spacer Standoffs made of PA 6.6
General product specification• Good coefficient of sliding friction• High mechanical stability and fatigue strength• Excellent resilience• Impact resistant• Resistant to abrasion• Resistant to cold• Chemical features:
Good resistance to weak alkalis, but only moderate resistance to strong alkalis; resistant to aromatic and aliphatic hydrocarbons, fuels, mineral oils and mineral lubricants; suitable for alcohols, esters, ketones, ethers and amines.
• Material specification:The polyamides are universal materials for mechanical functional partsThe temperature resistance of polyamide (from -30 to +100 °C, for a short time +120 °C) allows use in many industriesConnecting parts made of polyamide and similar plastics protect from rust and corrosion damageInsulating properties and an amazingly high tensile strengthPA can also be used in the food processing industry and in medical fieldsResistant to corrosion and abrasionNon-toxic and unmagneticVibration-dampingPA 6.6 features the same chemical resistance as PA 6PA 6.6 has a higher hardness, abrasion resistance, and a little higher operating temperature than PA 6However, PA 6.6 is a little less impact resistant compared to PA 6
General technical specification• Material: PA 6.6 (polyamide 6.6)• Colour: natural• Density: 1.14 g/cm3 (DIN 53479)• Temperature range: -30 to +100 °C• Melting temperature: +255 °C (DIN 53736)• Yield stress: 83 N/mm2 (ISO 527)• Elongation at break: 30 % (DIN 53455)• Bending strength: 115 N/mm2 (DIN 53452)• Elastic modulus: 3,000 N/mm2 (DIN 53457)• Impact resistance (Charpy): without break (DIN 53453)• Notch impact strength (Izod): 60 J/m (ASTM D 256)• Coefficient of sliding friction against steel (dry): 0.35 - 0.42• Dielectric loss factor (at 1 MHz): 0.025 (DIN 53483)• Volume resistivity: 1015 Ohm x cm (DIN 53482)• Surface resistance: approx. 1014 Ohm (DIN 53482)
• Comparative tracking index (CTI): >600 V (IEC 112)• Dielectric strength: approx. 40 kV/mm (DIN 53481)• Water absorption (saturation): approx. 8.5 % (DIN 53495)• Moisture absorption (s.c.a.-saturation): approx. 2.9 % (DIN 53714)
THOMAPLAST®-Spacer Standoff made of PA - hexagonal, external thread
Product specification• Hexagon spacer standoffs, external thread on both sides
Item External thread
P1 P2 L WAF Unit Price
mm mm mm mm piece EURO
338671 M3 x 0.5 6 6 5 6 10 40.00338672 M3 x 0.5 6 6 5 6 25 86.00338673 M3 x 0.5 6 6 8 6 10 40.00338674 M3 x 0.5 6 6 8 6 25 86.00338675 M3 x 0.5 6 6 10 6 10 40.00338676 M3 x 0.5 6 6 10 6 25 86.00338677 M3 x 0.5 6 6 12 6 10 44.00338678 M3 x 0.5 6 6 12 6 25 98.00338679 M3 x 0.5 6 6 15 6 10 44.00338680 M3 x 0.5 6 6 15 6 25 98.00338681 M3 x 0.5 6 6 18 6 10 44.00338682 M3 x 0.5 6 6 18 6 25 98.00338683 M3 x 0.5 6 6 20 6 10 44.00338684 M3 x 0.5 6 6 20 6 25 98.00338685 M3 x 0.5 6 6 25 6 10 50.00338686 M3 x 0.5 6 6 25 6 25 108.00338687 M3 x 0.5 6 6 30 6 10 50.00338688 M3 x 0.5 6 6 30 6 25 108.00338689 M3 x 0.5 6 6 35 6 10 50.00338690 M3 x 0.5 6 6 35 6 25 108.00338691 M4 x 0.7 6.4 6.4 5 8 10 40.00338692 M4 x 0.7 6.4 6.4 5 8 25 86.00338693 M4 x 0.7 6.4 6.4 8 8 10 40.00338694 M4 x 0.7 6.4 6.4 8 8 25 86.00338695 M4 x 0.7 6.4 6.4 10 8 10 40.00338696 M4 x 0.7 6.4 6.4 10 8 25 86.00338697 M4 x 0.7 6.4 6.4 12 8 10 44.00338698 M4 x 0.7 6.4 6.4 12 8 25 98.00338699 M4 x 0.7 6.4 6.4 15 8 10 44.00338700 M4 x 0.7 6.4 6.4 15 8 25 98.00338701 M4 x 0.7 6.4 6.4 18 8 10 44.00338702 M4 x 0.7 6.4 6.4 18 8 25 98.00338703 M4 x 0.7 6.4 6.4 20 8 10 44.00338704 M4 x 0.7 6.4 6.4 20 8 25 98.00338705 M4 x 0.7 6.4 6.4 25 8 10 50.00
28 THOMAPLAST® IV - 2015
Fastening Elements Spacer Elements
Item External thread
P1 P2 L WAF Unit Price
mm mm mm mm piece EURO
338706 M4 x 0.7 6.4 6.4 25 8 25 108.00338707 M4 x 0.7 6.4 6.4 30 8 10 50.00338708 M4 x 0.7 6.4 6.4 30 8 25 108.00338709 M4 x 0.7 6.4 6.4 35 8 10 50.00338710 M4 x 0.7 6.4 6.4 35 8 25 108.00
THOMAPLAST®-Spacer Standoff made of PA - glass fibre reinforced, internal thread
Product specification• Hexagon spacer standoffs, internal thread M2.5; M3 or M4 on both sides
Technical specification• Material: PA 6, glass fibre reinforced (25 %)• Colour: black• Density: 1.32 g/cm3 (ISO 1183)• Temperature range: -40 to +110 °C, for a short time +200 °C• Tensile strength: 170 / 100 MPa (dry / humid) (ISO 527)• Bending strength: 220 / 180 MPa (dry / humid) (ISO 178)• Elongation at break: 3 / 5 % (dry / humid) (ISO 527)• Elastic modulus: 8,000 MPa• Bending stress: 5,000 N/mm2
• Impact resistance (Charpy): 80 kJ/m2 (ISO 179-1 eU)• Ball pressure hardness: 210 MPa (ISO 2039-1)• Notch impact strength (Izod): 12 kJ/m2 (ISO 180-1 A)• Melting point: +220 °C (ISO 11357)• Water absorption: 2.3 % (ISO 62)• Dielectric strength: 80 / 30 kV/mm (dry / humid) (IEC 60243-1)• Volume resistivity: 1013 / 1010 Ohm x m (dry / humid) (IEC 60093)• Surface resistance: 1012 / 1010 Ohm (dry / humid) (IEC 60093)• Comparative track. index (CTI): 450 (IEC 60112)
Item Internal thread
P1 P2 L WAF (SW)
Unit Price
mm mm mm mm piece EURO
312804 M2.5 x 0.45 4 4 8 5 25 90.00312805 M2.5 x 0.45 4 4 8 5 50 148.00312806 M2.5 x 0.45 5 5 10 5 25 90.00312807 M2.5 x 0.45 5 5 10 5 50 148.00312808 M2.5 x 0.45 6 6 12 5 25 94.00312809 M2.5 x 0.45 6 6 12 5 50 162.00312810 M2.5 x 0.45 7.5 7.5 15 5 25 94.00312811 M2.5 x 0.45 7.5 7.5 15 5 50 162.00312812 M2.5 x 0.45 6 6 18 5 25 94.00312813 M2.5 x 0.45 6 6 18 5 50 162.00312814 M2.5 x 0.45 6 6 20 5 25 94.00312815 M2.5 x 0.45 6 6 20 5 50 162.00
Item Internal thread
P1 P2 L WAF (SW)
Unit Price
mm mm mm mm piece EURO
312816 M2.5 x 0.45 6 6 25 5 10 60.00312817 M2.5 x 0.45 6 6 25 5 25 126.00312818 M2.5 x 0.45 6 6 30 5 10 60.00312819 M2.5 x 0.45 6 6 30 5 25 126.00312820 M3 x 0.5 4 4 8 6 25 78.00312821 M3 x 0.5 4 4 8 6 50 132.00312822 M3 x 0.5 5 5 10 6 25 80.00312823 M3 x 0.5 5 5 10 6 50 134.00312824 M3 x 0.5 5.5 5.5 11 6 25 80.00312825 M3 x 0.5 5.5 5.5 11 6 50 134.00312826 M3 x 0.5 6 6 12 6 25 80.00312827 M3 x 0.5 6 6 12 6 50 134.00312828 M3 x 0.5 6.5 6.5 13 6 25 82.00312829 M3 x 0.5 6.5 6.5 13 6 50 136.00312830 M3 x 0.5 7.5 7.5 15 6 25 82.00312831 M3 x 0.5 7.5 7.5 15 6 50 136.00312832 M3 x 0.5 8 8 17 6 25 84.00312833 M3 x 0.5 8 8 17 6 50 140.00312834 M3 x 0.5 8 8 18 6 25 84.00312835 M3 x 0.5 8 8 18 6 50 140.00312836 M3 x 0.5 10 10 20 6 25 84.00312837 M3 x 0.5 10 10 20 6 50 140.00312838 M3 x 0.5 10 10 25 6 25 98.00312839 M3 x 0.5 10 10 25 6 50 182.00312840 M3 x 0.5 10 10 30 6 10 56.00312841 M3 x 0.5 10 10 30 6 25 120.00312842 M3 x 0.5 10 10 35 6 10 58.00312843 M3 x 0.5 10 10 35 6 25 124.00312844 M3 x 0.5 10 10 40 6 10 60.00312845 M3 x 0.5 10 10 40 6 25 130.00312846 M3 x 0.5 10 10 45 6 10 60.00312847 M3 x 0.5 10 10 45 6 25 130.00312848 M3 x 0.5 10 10 50 6 10 64.00312849 M3 x 0.5 10 10 50 6 25 136.00312850 M4 x 0.7 4 4 8 8 25 94.00312851 M4 x 0.7 4 4 8 8 50 158.00312852 M4 x 0.7 5 5 10 8 25 94.00312853 M4 x 0.7 5 5 10 8 50 158.00312854 M4 x 0.7 6 6 12 8 25 94.00312855 M4 x 0.7 6 6 12 8 50 158.00312856 M4 x 0.7 7.5 7.5 15 8 25 94.00312857 M4 x 0.7 7.5 7.5 15 8 50 158.00312858 M4 x 0.7 9 9 18 8 25 94.00312859 M4 x 0.7 9 9 18 8 50 158.00312860 M4 x 0.7 10 10 20 8 25 94.00312861 M4 x 0.7 10 10 20 8 50 158.00312862 M4 x 0.7 10 10 25 8 10 44.00312863 M4 x 0.7 10 10 25 8 25 94.00312864 M4 x 0.7 10 10 30 8 10 44.00312865 M4 x 0.7 10 10 30 8 25 94.00312866 M4 x 0.7 10 10 35 8 10 54.00312867 M4 x 0.7 10 10 35 8 25 116.00312868 M4 x 0.7 10 10 40 8 10 54.00312869 M4 x 0.7 10 10 40 8 25 116.00312870 M4 x 0.7 10 10 45 8 10 60.00
THOMAPLAST® IV - 2015 29
Fastening Elements Spacer Elements
Item Internal thread
P1 P2 L WAF (SW)
Unit Price
mm mm mm mm piece EURO
312871 M4 x 0.7 10 10 45 8 25 128.00312872 M4 x 0.7 10 10 50 8 10 60.00312873 M4 x 0.7 10 10 50 8 25 128.00
THOMAPLAST®-Spacer Standoff made of PA - glass fibre reinforced, internal / external thread
Product specification• Hexagon spacer standoffs, internal thread on one side, external thread
on the other side
Technical specification• Material: PA 6, glass fibre reinforced (25 %)• Colour: black
Item Internal thread
P1 External thread
P2 L WAF (SW)
Unit Price
mm mm mm mm piece EURO
312734 M3 x 0.5 5 M3 x 0.5 8 8 6 25 80.00312735 M3 x 0.5 5 M3 x 0.5 8 8 6 50 132.00312736 M3 x 0.5 7 M3 x 0.5 8 10 6 25 80.00312737 M3 x 0.5 7 M3 x 0.5 8 10 6 50 132.00312738 M3 x 0.5 9 M3 x 0.5 8 12 6 25 88.00312739 M3 x 0.5 9 M3 x 0.5 8 12 6 50 146.00312740 M3 x 0.5 10 M3 x 0.5 8 15 6 25 88.00312741 M3 x 0.5 10 M3 x 0.5 8 15 6 50 146.00312742 M3 x 0.5 10 M3 x 0.5 8 18 6 25 88.00312743 M3 x 0.5 10 M3 x 0.5 8 18 6 50 146.00312744 M3 x 0.5 10 M3 x 0.5 8 20 6 25 88.00312745 M3 x 0.5 10 M3 x 0.5 8 20 6 50 146.00312746 M3 x 0.5 10 M3 x 0.5 8 25 6 10 56.00312747 M3 x 0.5 10 M3 x 0.5 8 25 6 25 120.00312748 M3 x 0.5 10 M3 x 0.5 8 30 6 10 60.00312749 M3 x 0.5 10 M3 x 0.5 8 30 6 25 126.00312750 M3 x 0.5 10 M3 x 0.5 8 35 6 10 62.00312751 M3 x 0.5 10 M3 x 0.5 8 35 6 25 132.00312752 M3 x 0.5 10 M3 x 0.5 8 40 6 10 62.00312753 M3 x 0.5 10 M3 x 0.5 8 40 6 25 132.00312754 M3 x 0.5 10 M3 x 0.5 8 45 6 10 64.00312755 M3 x 0.5 10 M3 x 0.5 8 45 6 25 134.00312756 M3 x 0.5 10 M3 x 0.5 8 50 6 10 64.00312757 M3 x 0.5 10 M3 x 0.5 8 50 6 25 134.00312758 M4 x 0.7 6 M4 x 0.7 8 8 8 25 88.00312759 M4 x 0.7 6 M4 x 0.7 8 8 8 50 148.00312760 M4 x 0.7 7 M4 x 0.7 8 10 8 25 88.00
Item Internal thread
P1 External thread
P2 L WAF (SW)
Unit Price
mm mm mm mm piece EURO
312761 M4 x 0.7 7 M4 x 0.7 8 10 8 50 148.00312762 M4 x 0.7 9 M4 x 0.7 8 12 8 25 88.00312763 M4 x 0.7 9 M4 x 0.7 8 12 8 50 148.00312764 M4 x 0.7 10 M4 x 0.7 8 15 8 25 88.00312765 M4 x 0.7 10 M4 x 0.7 8 15 8 50 148.00312766 M4 x 0.7 10 M4 x 0.7 8 18 8 25 88.00312767 M4 x 0.7 10 M4 x 0.7 8 18 8 50 148.00312768 M4 x 0.7 10 M4 x 0.7 8 20 8 25 88.00312769 M4 x 0.7 10 M4 x 0.7 8 20 8 50 148.00312770 M4 x 0.7 10 M4 x 0.7 8 25 8 25 96.00312771 M4 x 0.7 10 M4 x 0.7 8 25 8 50 160.00312772 M4 x 0.7 10 M4 x 0.7 8 30 8 10 42.00312773 M4 x 0.7 10 M4 x 0.7 8 30 8 25 88.00312774 M4 x 0.7 10 M4 x 0.7 8 35 8 10 50.00312775 M4 x 0.7 10 M4 x 0.7 8 35 8 25 104.00312776 M4 x 0.7 10 M4 x 0.7 8 40 8 10 52.00312777 M4 x 0.7 10 M4 x 0.7 8 40 8 25 108.00312778 M4 x 0.7 10 M4 x 0.7 8 45 8 10 56.00312779 M4 x 0.7 10 M4 x 0.7 8 45 8 25 118.00312780 M4 x 0.7 10 M4 x 0.7 8 50 8 10 58.00312781 M4 x 0.7 10 M4 x 0.7 8 50 8 25 122.00
THOMASTABIL®-Distance Sleeves made of Brass
General product specification• Resistance: very good resistance to weather and aging; good corrosion
resistance; good resistance in normal dry atmosphere, to fresh water, steam, mineral oils, fuels, cooling, lubricating and cutting liquids as well as to many organic emulsions.
General technical specification• Material: brass (CUZn39Pb3)• Density: 8.44 g/cm3
• Temperature range: -40 to +200 °C• Tensile strength: >500 N/mm2
• Yield strength: >390 N/mm2
• Elongation at break: >8 %• Hardness: 140 - 150 HV (103 N/mm2)• Coefficient of linear expansion: 20.6 x 10-6/K• Melting point: approx. +900 °C
THOMASTABIL®-Spacer Standoff made of Brass - hexagonal, internal thread (M2.5 - M5)
Product specification• Hexagon, WAF 5 up to WAF 8; internal thread on both sides,
M2.5 up to M5
30 THOMAPLAST® IV - 2015
Fastening Elements Spacer Elements
Item Internal thread
P1 P2 L WAF (SW)
Unit Price
mm mm mm mm piece EURO
312536 M2.5 x 0.45 2.5 2.5 5 5 25 17.00312537 M2.5 x 0.45 2.5 2.5 5 5 50 25.00312538 M2.5 x 0.45 3 3 6 5 25 18.00312539 M2.5 x 0.45 3 3 6 5 50 25.00312540 M2.5 x 0.45 4 4 8 5 25 20.00312541 M2.5 x 0.45 4 4 8 5 50 28.00312542 M2.5 x 0.45 5 5 10 5 25 21.00312543 M2.5 x 0.45 5 5 10 5 50 29.00312544 M2.5 x 0.45 6 6 12 5 25 22.00312545 M2.5 x 0.45 6 6 12 5 50 32.00312546 M2.5 x 0.45 7.5 7.5 15 5 25 25.00312547 M2.5 x 0.45 7.5 7.5 15 5 50 35.00312548 M2.5 x 0.45 9 9 18 5 25 26.00312549 M2.5 x 0.45 9 9 18 5 50 38.00312550 M2.5 x 0.45 10 10 20 5 25 28.00312551 M2.5 x 0.45 10 10 20 5 50 40.00312552 M2.5 x 0.45 5 5 25 5 25 31.00312553 M2.5 x 0.45 5 5 25 5 50 45.00312554 M2.5 x 0.45 5 5 30 5 25 35.00312555 M2.5 x 0.45 5 5 30 5 50 50.00312556 M2.5 x 0.45 5 5 35 5 10 17.00312557 M2.5 x 0.45 5 5 35 5 25 29.00312558 M2.5 x 0.45 5 5 40 5 10 18.00312559 M2.5 x 0.45 5 5 40 5 25 32.00312560 M2.5 x 0.45 5 5 45 5 10 20.00312561 M2.5 x 0.45 5 5 45 5 25 35.00312562 M3 x 0.5 2.5 2.5 5 5 25 16.00312563 M3 x 0.5 2.5 2.5 5 5 50 23.00312564 M3 x 0.5 3 3 6 5 25 17.00312565 M3 x 0.5 3 3 6 5 50 23.00312566 M3 x 0.5 3.5 3.5 7 5 25 17.00312567 M3 x 0.5 3.5 3.5 7 5 50 24.00312568 M3 x 0.5 4 4 8 5 25 18.00312569 M3 x 0.5 4 4 8 5 50 26.00312570 M3 x 0.5 5 5 10 5 25 19.00312571 M3 x 0.5 5 5 10 5 50 27.00312572 M3 x 0.5 5.5 5.5 11 5 25 20.00312573 M3 x 0.5 5.5 5.5 11 5 50 28.00312574 M3 x 0.5 6 6 12 5 25 21.00312575 M3 x 0.5 6 6 12 5 50 29.00312576 M3 x 0.5 6.5 6.5 13 5 25 21.00312577 M3 x 0.5 6.5 6.5 13 5 50 30.00312578 M3 x 0.5 7 7 14 5 25 22.00312579 M3 x 0.5 7 7 14 5 50 31.00312580 M3 x 0.5 7.5 7.5 15 5 25 23.00312581 M3 x 0.5 7.5 7.5 15 5 50 32.00312582 M3 x 0.5 8 8 16 5 25 24.00312583 M3 x 0.5 8 8 16 5 50 34.00312584 M3 x 0.5 8.5 8.5 17 5 25 24.00312585 M3 x 0.5 8.5 8.5 17 5 50 34.00312586 M3 x 0.5 9 9 18 5 25 25.00312587 M3 x 0.5 9 9 18 5 50 35.00312588 M3 x 0.5 10 10 20 5 25 26.00312589 M3 x 0.5 10 10 20 5 50 37.00312590 M3 x 0.5 6 6 25 5 25 29.00
Item Internal thread
P1 P2 L WAF (SW)
Unit Price
mm mm mm mm piece EURO
312591 M3 x 0.5 6 6 25 5 50 41.00312592 M3 x 0.5 6 6 30 5 10 13.00312593 M3 x 0.5 6 6 30 5 25 23.00312594 M3 x 0.5 6 6 35 5 10 15.00312595 M3 x 0.5 6 6 35 5 25 26.00312596 M3 x 0.5 6 6 40 5 10 16.00312597 M3 x 0.5 6 6 40 5 25 28.00312598 M3 x 0.5 6 6 45 5 10 18.00312599 M3 x 0.5 6 6 45 5 25 33.00312600 M3 x 0.5 6 6 50 5 10 19.00312601 M3 x 0.5 6 6 50 5 25 34.00312646 M4 x 0.7 3.5 3.5 7 7 25 17.00312647 M4 x 0.7 3.5 3.5 7 7 50 24.00312648 M4 x 0.7 4 4 8 7 25 17.00312649 M4 x 0.7 4 4 8 7 50 25.00312650 M4 x 0.7 5 5 10 7 25 20.00312651 M4 x 0.7 5 5 10 7 50 28.00312652 M4 x 0.7 6 6 12 7 25 23.00312653 M4 x 0.7 6 6 12 7 50 32.00312654 M4 x 0.7 6.5 6.5 13 7 25 24.00312655 M4 x 0.7 6.5 6.5 13 7 50 34.00312656 M4 x 0.7 7 7 14 7 25 23.00312657 M4 x 0.7 7 7 14 7 50 33.00312658 M4 x 0.7 7.5 7.5 15 7 25 25.00312659 M4 x 0.7 7.5 7.5 15 7 50 35.00312660 M4 x 0.7 8 8 16 7 25 25.00312661 M4 x 0.7 8 8 16 7 50 36.00312662 M4 x 0.7 8.5 8.5 17 7 25 28.00312663 M4 x 0.7 8.5 8.5 17 7 50 39.00312664 M4 x 0.7 9 9 18 7 25 29.00312665 M4 x 0.7 9 9 18 7 50 41.00312666 M4 x 0.7 10 10 20 7 10 13.00312667 M4 x 0.7 10 10 20 7 25 23.00312668 M4 x 0.7 8 8 25 7 10 15.00312669 M4 x 0.7 8 8 25 7 25 26.00312670 M4 x 0.7 8 8 30 7 10 16.00312671 M4 x 0.7 8 8 30 7 25 29.00312672 M4 x 0.7 8 8 35 7 10 20.00312673 M4 x 0.7 8 8 35 7 25 35.00312674 M4 x 0.7 8 8 40 7 10 21.00312675 M4 x 0.7 8 8 40 7 25 36.00312676 M4 x 0.7 8 8 45 7 10 25.00312677 M4 x 0.7 8 8 45 7 25 44.00312678 M4 x 0.7 8 8 50 7 10 26.00312679 M4 x 0.7 8 8 50 7 25 46.00339163 M5 x 0.8 2.5 2.5 5 8 10 15.00339164 M5 x 0.8 2.5 2.5 5 8 25 26.00339165 M5 x 0.8 4 4 8 8 10 20.00339166 M5 x 0.8 4 4 8 8 25 36.00339167 M5 x 0.8 5 5 10 8 10 21.00339168 M5 x 0.8 5 5 10 8 25 37.00339169 M5 x 0.8 6 6 12 8 10 22.00339170 M5 x 0.8 6 6 12 8 25 40.00339171 M5 x 0.8 7.5 7.5 15 8 10 26.00339172 M5 x 0.8 7.5 7.5 15 8 25 46.00
THOMAPLAST® IV - 2015 31
Fastening Elements Spacer Elements
Item Internal thread
P1 P2 L WAF (SW)
Unit Price
mm mm mm mm piece EURO
339173 M5 x 0.8 9 9 18 8 10 30.00339174 M5 x 0.8 9 9 18 8 25 53.00339175 M5 x 0.8 10 10 20 8 10 32.00339176 M5 x 0.8 10 10 20 8 25 57.00339177 M5 x 0.8 11 11 25 8 10 39.00339178 M5 x 0.8 11 11 25 8 25 70.00339179 M5 x 0.8 11 11 30 8 10 40.00339180 M5 x 0.8 11 11 30 8 25 72.00339181 M5 x 0.8 11 11 35 8 5 25.00339182 M5 x 0.8 11 11 35 8 15 54.00339183 M5 x 0.8 11 11 40 8 5 27.00339184 M5 x 0.8 11 11 40 8 15 58.00339185 M5 x 0.8 11 11 45 8 5 30.00339186 M5 x 0.8 11 11 45 8 15 63.00339187 M5 x 0.8 11 11 50 8 5 32.00339188 M5 x 0.8 11 11 50 8 15 68.00339189 M5 x 0.8 11 11 55 8 5 34.00339190 M5 x 0.8 11 11 55 8 15 72.00339191 M5 x 0.8 11 11 60 8 5 35.00339192 M5 x 0.8 11 11 60 8 15 75.00339193 M5 x 0.8 11 11 70 8 5 38.00339194 M5 x 0.8 11 11 70 8 15 82.00339195 M5 x 0.8 11 11 80 8 5 43.00339196 M5 x 0.8 11 11 80 8 15 92.00
THOMASTABIL®-Spacer Standoffs made of Brass - hexagonal, internal / external thread (M2.5 - M5)
Product specification• Hexagon, WAF 5 up to WAF 8; internal thread on one side, external
thread on the other side
Item External / Internal thread
P1 P2 L WAF (SW)
Unit Price
mm mm mm mm piece EURO
312196 M2.5 x 0.45 6 2.5 5 5 25 22.00312197 M2.5 x 0.45 6 2.5 5 5 50 32.00312198 M2.5 x 0.45 6 5 8 5 25 24.00312199 M2.5 x 0.45 6 5 8 5 50 34.00312200 M2.5 x 0.45 6 6 10 5 25 25.00312201 M2.5 x 0.45 6 6 10 5 50 36.00312202 M2.5 x 0.45 6 6 12 5 25 28.00312203 M2.5 x 0.45 6 6 12 5 50 40.00312204 M2.5 x 0.45 6 6 15 5 25 29.00312205 M2.5 x 0.45 6 6 15 5 50 41.00
Item External / Internal thread
P1 P2 L WAF (SW)
Unit Price
mm mm mm mm piece EURO
312206 M2.5 x 0.45 6 6 18 5 25 31.00312207 M2.5 x 0.45 6 6 18 5 50 44.00312208 M2.5 x 0.45 6 6 20 5 10 13.00312209 M2.5 x 0.45 6 6 20 5 25 23.00312210 M2.5 x 0.45 6 6 25 5 10 15.00312211 M2.5 x 0.45 6 6 25 5 25 26.00312212 M2.5 x 0.45 6 6 30 5 10 16.00312213 M2.5 x 0.45 6 6 30 5 25 28.00312214 M2.5 x 0.45 6 6 35 5 10 18.00312215 M2.5 x 0.45 6 6 35 5 25 32.00312216 M2.5 x 0.45 6 6 40 5 10 20.00312217 M2.5 x 0.45 6 6 40 5 25 35.00312218 M3 x 0.5 6 2.5 5 5 25 20.00312219 M3 x 0.5 6 2.5 5 5 50 28.00312220 M3 x 0.5 6 3.5 6 5 25 21.00312221 M3 x 0.5 6 3.5 6 5 50 29.00312222 M3 x 0.5 6 5 8 5 25 24.00312223 M3 x 0.5 6 5 8 5 50 34.00312224 M3 x 0.5 6 6 10 5 25 25.00312225 M3 x 0.5 6 6 10 5 50 36.00312226 M3 x 0.5 6 6 12 5 25 26.00312227 M3 x 0.5 6 6 12 5 50 38.00312228 M3 x 0.5 6 6 15 5 25 29.00312229 M3 x 0.5 6 6 15 5 50 41.00312230 M3 x 0.5 6 6 18 5 25 31.00312231 M3 x 0.5 6 6 18 5 50 44.00312232 M3 x 0.5 6 6 20 5 25 33.00312233 M3 x 0.5 6 6 20 5 50 46.00312234 M3 x 0.5 6 6 25 5 10 15.00312235 M3 x 0.5 6 6 25 5 25 26.00312236 M3 x 0.5 6 6 30 5 10 16.00312237 M3 x 0.5 6 6 30 5 25 28.00312238 M3 x 0.5 6 6 35 5 10 18.00312239 M3 x 0.5 6 6 35 5 25 32.00312240 M3 x 0.5 6 6 40 5 10 20.00312241 M3 x 0.5 6 6 40 5 25 35.00312242 M3 x 0.5 8 2.5 5 5 25 21.00312243 M3 x 0.5 8 2.5 5 5 50 29.00312244 M3 x 0.5 8 5 8 5 25 25.00312245 M3 x 0.5 8 5 8 5 50 36.00312246 M3 x 0.5 8 6 10 5 25 26.00312247 M3 x 0.5 8 6 10 5 50 38.00312248 M3 x 0.5 8 8 12 5 25 28.00312249 M3 x 0.5 8 8 12 5 50 39.00312250 M3 x 0.5 8 8 15 5 25 30.00312251 M3 x 0.5 8 8 15 5 50 42.00312252 M3 x 0.5 8 8 18 5 25 32.00312253 M3 x 0.5 8 8 18 5 50 46.00312254 M3 x 0.5 8 8 20 5 25 34.00312255 M3 x 0.5 8 8 20 5 50 48.00312256 M3 x 0.5 8 8 25 5 10 16.00312257 M3 x 0.5 8 8 25 5 25 28.00312258 M3 x 0.5 8 8 30 5 10 17.00312259 M3 x 0.5 8 8 30 5 25 31.00312260 M3 x 0.5 8 8 35 5 10 19.00
32 THOMAPLAST® IV - 2015
Fastening Elements Spacer Elements
Item External / Internal thread
P1 P2 L WAF (SW)
Unit Price
mm mm mm mm piece EURO
312261 M3 x 0.5 8 8 35 5 25 33.00312262 M3 x 0.5 8 8 40 5 10 21.00312263 M3 x 0.5 8 8 40 5 25 38.00312264 M3 x 0.5 8 2.5 5 5.5 25 25.00312265 M3 x 0.5 8 2.5 5 5.5 50 36.00312266 M3 x 0.5 8 5 8 5.5 25 28.00312267 M3 x 0.5 8 5 8 5.5 50 39.00312268 M3 x 0.5 8 6 10 5.5 25 29.00312269 M3 x 0.5 8 6 10 5.5 50 42.00312270 M3 x 0.5 8 8 12 5.5 25 31.00312271 M3 x 0.5 8 8 12 5.5 50 45.00312272 M3 x 0.5 8 8 15 5.5 25 32.00312273 M3 x 0.5 8 8 15 5.5 50 46.00312274 M3 x 0.5 8 8 18 5.5 10 15.00312275 M3 x 0.5 8 8 18 5.5 25 26.00312276 M3 x 0.5 8 8 20 5.5 10 15.00312277 M3 x 0.5 8 8 20 5.5 25 27.00312278 M3 x 0.5 8 8 25 5.5 10 18.00312279 M3 x 0.5 8 8 25 5.5 25 32.00312280 M3 x 0.5 8 8 30 5.5 10 20.00312281 M3 x 0.5 8 8 30 5.5 25 36.00312282 M3 x 0.5 8 8 35 5.5 10 23.00312283 M3 x 0.5 8 8 35 5.5 25 40.00312284 M3 x 0.5 8 8 40 5.5 10 26.00312285 M3 x 0.5 8 8 40 5.5 25 46.00312286 M4 x 0.7 8 5 8 7 25 30.00312287 M4 x 0.7 8 5 8 7 50 43.00312288 M4 x 0.7 8 6 10 7 25 33.00312289 M4 x 0.7 8 6 10 7 50 46.00312290 M4 x 0.7 8 8 12 7 25 35.00312291 M4 x 0.7 8 8 12 7 50 50.00312292 M4 x 0.7 8 8 13 7 10 15.00312293 M4 x 0.7 8 8 13 7 25 27.00312294 M4 x 0.7 8 8 15 7 10 16.00312295 M4 x 0.7 8 8 15 7 25 28.00312296 M4 x 0.7 8 8 16 7 10 16.00312297 M4 x 0.7 8 8 16 7 25 29.00312298 M4 x 0.7 8 8 17 7 10 17.00312299 M4 x 0.7 8 8 17 7 25 30.00312300 M4 x 0.7 8 8 18 7 10 17.00312301 M4 x 0.7 8 8 18 7 25 30.00312302 M4 x 0.7 8 8 20 7 10 18.00312303 M4 x 0.7 8 8 20 7 25 32.00312304 M4 x 0.7 8 8 25 7 10 21.00312305 M4 x 0.7 8 8 25 7 25 36.00312306 M4 x 0.7 8 8 30 7 10 23.00312307 M4 x 0.7 8 8 30 7 25 41.00312308 M4 x 0.7 8 8 35 7 10 25.00312309 M4 x 0.7 8 8 35 7 25 45.00312310 M4 x 0.7 8 8 40 7 10 28.00312311 M4 x 0.7 8 8 40 7 25 49.00339095 M5 x 0.8 8 5 10 8 10 31.00339096 M5 x 0.8 8 5 10 8 25 54.00315186 M5 x 0.8 8 8 12 8 10 33.00315187 M5 x 0.8 8 8 12 8 25 59.00
Item External / Internal thread
P1 P2 L WAF (SW)
Unit Price
mm mm mm mm piece EURO
315188 M5 x 0.8 8 8 15 8 10 37.00315189 M5 x 0.8 8 8 15 8 25 65.00315190 M5 x 0.8 8 8 18 8 10 39.00315191 M5 x 0.8 8 8 18 8 25 69.00315192 M5 x 0.8 8 8 20 8 10 41.00315193 M5 x 0.8 8 8 20 8 25 72.00315194 M5 x 0.8 10 10 25 8 5 22.00315195 M5 x 0.8 10 10 25 8 15 46.00315196 M5 x 0.8 10 10 30 8 5 26.00315197 M5 x 0.8 10 10 30 8 15 55.00315198 M5 x 0.8 10 10 35 8 5 28.00315199 M5 x 0.8 10 10 35 8 15 60.00315200 M5 x 0.8 10 10 40 8 5 31.00315201 M5 x 0.8 10 10 40 8 15 65.00315202 M5 x 0.8 10 10 45 8 5 33.00315203 M5 x 0.8 10 10 45 8 15 71.00315204 M5 x 0.8 10 10 50 8 5 34.00315205 M5 x 0.8 10 10 50 8 15 73.00315206 M5 x 0.8 10 10 55 8 5 36.00315207 M5 x 0.8 10 10 55 8 15 76.00315208 M5 x 0.8 10 10 60 8 5 37.00315209 M5 x 0.8 10 10 60 8 15 78.00339137 M5 x 0.8 10 10 70 8 5 39.00339138 M5 x 0.8 10 10 70 8 15 83.00339139 M5 x 0.8 10 10 80 8 5 40.00339140 M5 x 0.8 10 10 80 8 15 86.00
The zinc coating is adherent, abrasion- and impact-resistant, and protects from corrosion over the long term due to its high resistance to atmospheric attack.
• Design: with through thread
Item Internal thread
D L Unit Price
mm mm piece EURO
338993 M5 x 0.8 8 15 10 48.00338994 M5 x 0.8 8 15 25 104.00338995 M5 x 0.8 8 20 10 58.00338996 M5 x 0.8 8 20 25 126.00338997 M5 x 0.8 8 25 10 62.00338998 M5 x 0.8 8 25 25 134.00338999 M6 x 1 10 10 10 46.00339000 M6 x 1 10 10 25 102.00339001 M6 x 1 10 15 10 56.00339002 M6 x 1 10 15 25 122.00339003 M6 x 1 10 20 10 64.00339004 M6 x 1 10 20 25 138.00339005 M6 x 1 10 25 10 66.00339006 M6 x 1 10 25 25 142.00339007 M6 x 1 10 30 10 76.00339008 M6 x 1 10 30 25 166.00339009 M6 x 1 10 35 10 76.00339010 M6 x 1 10 35 25 166.00339011 M6 x 1 10 40 10 98.00339012 M6 x 1 10 40 25 210.00339013 M6 x 1 10 50 5 64.00339014 M6 x 1 10 50 15 168.00339015 M6 x 1 10 60 5 78.00339016 M6 x 1 10 60 15 202.00339017 M8 x 1.25 11 15 10 58.00339018 M8 x 1.25 11 15 25 126.00339019 M8 x 1.25 11 20 10 58.00339020 M8 x 1.25 11 20 25 126.00339021 M8 x 1.25 11 25 10 72.00
Item Internal thread
D L Unit Price
mm mm piece EURO
339022 M8 x 1.25 11 25 25 152.00339023 M8 x 1.25 11 30 10 82.00339024 M8 x 1.25 11 30 25 176.00339025 M8 x 1.25 11 35 10 82.00339026 M8 x 1.25 11 35 25 176.00339027 M8 x 1.25 11 40 10 82.00339028 M8 x 1.25 11 40 25 176.00339029 M8 x 1.25 11 50 5 70.00339030 M8 x 1.25 11 50 15 182.00339031 M10 x 1.5 13 20 10 76.00339032 M10 x 1.5 13 20 25 164.00339033 M10 x 1.5 13 25 10 82.00339034 M10 x 1.5 13 25 25 176.00339035 M10 x 1.5 13 30 10 96.00339036 M10 x 1.5 13 30 25 206.00339037 M10 x 1.5 13 40 5 64.00339038 M10 x 1.5 13 40 15 168.00339039 M10 x 1.5 13 50 5 70.00339040 M10 x 1.5 13 50 15 182.00
Bushings
THOMAPLAST®-Bushings made of PA 6 (M3 - M16)
General product specification• For insulation of fasteners in the construction• Prevent contact with conductive material and therefore short circuit• Prevent vibrations and loosening of parts• Resistant to electrolytic corrosion and thus indispensable• For connecting incompatible metals• Allow precise positioning and distance keeping of structural components• Chemical features:
Resistant to aromatic and aliphatic hydrocarbons, fuels, mineral oils and mineral lubricants; suitable for alcohols, esters, ketones, ethers and amines; good resistance to weak alkalis, but only moderate resistance to strong alkalis;Limited resistance to weak mineral and organic acids; not resistant to oxidizing acids, strong mineral and organic acids as well as phenols; limited resistance to hydrolysis
• Material specification:Polyamide is an elastic, tough, loadable, but notch-sensitive materialImpact resistantResistant to abrasion and coldHigh fatigue strength and excellent resilienceHigh wear resistance and good mechanical damping capacityInsulating properties and an amazingly high tensile strengthConnecting parts made of polyamide and similar plastics protect from rust and corrosion damagePolyamide can also be used in the food processing industry and in medical fieldsPA 6 features a higher impact resistance compared to PA 6.6PA 6 has the highest water absorption of all common plastics up to 9 to 10 % (followed by PA 6.6 with 8 to 9 %), thus considerably increa-sed toughness, flexibility and elongation. However, the strength of the material can therefore be reduced by up to 10%.
THOMAPLAST® IV - 2015 37
Fastening Elements Bushings
General technical specification• Material: PA 6 (polyamide 6)• Colour: natural• Density: approx. 1.14 g/cm3
• Temperature range: -40 to +85 °C, for a short time +180 °C• Melting temperature: +220 °C (ISO 11357)• Yield stress: 75 MPa (ISO 527)• Elongation at break: >50 % (ISO 527)• Elastic modulus: 3,200 MPa (ISO 527)• Impact resistance: without break (DIN 53453)• Notch impact strength (Charpy): >3 kJ/m2 (ISO 179)• Ball pressure hardness: 160 N/mm2 (ISO 2039-1)• Shore hardness D: 82° (DIN 53505)• Dielectric strength: 20 kV/mm (IEC 60243)• Dielectric constant: 3.9 at 50 Hz (IEC 60250)• Surface resistance: 1013 Ohm (IEC 60093)• Volume resistivity: 1015 Ohm x cm (IEC 60093)• Comparative tracking index (CTI): >600 (DIN 53480)• Dielectric loss factor (at 50 Hz): 0.02 (specimen dry)• Water absorption: up to 10 % (during storage in water) (DIN 53472)• Flammability rating: UL 94 HB
THOMAPLAST®-Insulating Spacers made of Impact-Resistant Polystyrene
General product specification• Threads are mutually insulated• Available in three different designs• Chemical features:
Resistant to alcohols, weak and strong alkalis, organic and weak mineral acidsOnly limited resistance to weather and UV radiation, therefore less suitable for outdoor applications
• Material specification:Extremely impact resistant, thus well suited for shockproof componentsNot notch-sensitiveWell suited for use at low temperaturesThis styrene butadiene is distinguished from conventional polystyrene by:- higher impact and notch impact strength- better stress cracking resistance- lower stiffness and hardness- less resistant to aging than normal polystyrene
General technical specification• Material: PS (styrene butadiene, BP 5400)• Colour: white• Density: 1.04 g/cm3
• Temperature range: -40 to 80 °C• Flammability rating: UL 94 HB• Vicat softening temperature: approx. +94 °C (5 kg) (ISO 306)• Modulus of elasticity in bending: 2,400 MPa (ISO 178, 3-point bending)• Elastic modulus: 2,000 MPa (ISO 527)• Elongation at break: 40 % (DIN 53455)• Impact resistance (Charpy): without break (ISO 179)
40 THOMAPLAST® IV - 2015
Fastening Elements Insulating Spacers and Insulators
• Notch impact strength (Izod): 95 J/m (ISO 180)• Notch impact strength: 9 kJ/m2 (DIN 53453)• Ball pressure hardness: 115 N/mm2 (DIN 53456)• Water absorption: <0.1 % (ISO 62)• Dielectric strength: 150 kV/mm (DIN 53481)• Volume resistivity: 1016 Ohm x cm (DIN 53482)• Dielectric constant: 2.6 at 50 Hz (DIN 53483)• Dielectric loss factor: 4 x 10-4 at 50 Hz (IEC 250)• Comparative track. index (CTI): 200 (IEC 112)
THOMAPLAST®-Insulating Spacer made of PS - cylindrical, internal / external thread (M3 - M6)
Technical specification• Design: cylindrical, hexagon in the middle; with internal / external thread• Internal thread: brass• External thread: hot-dip galvanized steel
Item L External / Internal thread
P1 P2 WAF Unit Price
mm mm mm mm piece EURO
333807 15 M3 x 0.5 7 7 6 5 60.00333808 15 M3 x 0.5 7 7 6 15 156.00333809 20 M3 x 0.5 7 7 6 5 60.00333810 20 M3 x 0.5 7 7 6 15 156.00333811 25 M3 x 0.5 7 7 6 5 62.00333812 25 M3 x 0.5 7 7 6 15 162.00333813 30 M3 x 0.5 7 7 6 5 64.00333814 30 M3 x 0.5 7 7 6 15 166.00333815 40 M3 x 0.5 7 7 6 5 62.00333816 40 M3 x 0.5 7 7 6 15 162.00333817 55 M3 x 0.5 7 7 6 5 62.00333818 55 M3 x 0.5 7 7 6 15 162.00333819 15 M4 x 0.7 7 7 9 5 64.00333820 15 M4 x 0.7 7 7 9 15 166.00333821 20 M4 x 0.7 7 7 9 5 64.00333822 20 M4 x 0.7 7 7 9 15 166.00333823 25 M4 x 0.7 7 7 9 5 64.00333824 25 M4 x 0.7 7 7 9 15 166.00333825 30 M4 x 0.7 7 7 9 5 64.00333826 30 M4 x 0.7 7 7 9 15 166.00333827 40 M4 x 0.7 7 7 9 5 64.00333828 40 M4 x 0.7 7 7 9 15 166.00333829 55 M4 x 0.7 7 7 9 5 64.00333830 55 M4 x 0.7 7 7 9 15 166.00333831 60 M4 x 0.7 7 7 9 5 64.00333832 60 M4 x 0.7 7 7 9 15 166.00338463 90 M4 x 0.7 7 7 9 5 72.00338464 90 M4 x 0.7 7 7 9 15 184.00
Item L External / Internal thread
P1 P2 WAF Unit Price
mm mm mm mm piece EURO
338465 15 M5 x 0.8 7 7 13 5 80.00338466 15 M5 x 0.8 7 7 13 15 204.00338467 20 M5 x 0.8 7 7 13 5 82.00338468 20 M5 x 0.8 7 7 13 15 212.00338469 30 M5 x 0.8 7 7 13 5 86.00338470 30 M5 x 0.8 7 7 13 15 222.00338471 45 M5 x 0.8 7 7 13 5 96.00338472 45 M5 x 0.8 7 7 13 15 240.00338473 55 M5 x 0.8 7 7 13 5 102.00338474 55 M5 x 0.8 7 7 13 15 254.00338475 70 M5 x 0.8 7 7 13 5 108.00338476 70 M5 x 0.8 7 7 13 15 278.00338477 120 M5 x 0.8 7 7 13 5 114.00338478 120 M5 x 0.8 7 7 13 15 296.00338479 85 M5 x 0.8 7 7 13 5 118.00338480 85 M5 x 0.8 7 7 13 15 302.00338481 15 M6 x 1 7 7 13 5 80.00338482 15 M6 x 1 7 7 13 15 204.00338483 20 M6 x 1 7 7 13 5 82.00338484 20 M6 x 1 7 7 13 15 212.00338485 30 M6 x 1 7 7 13 5 86.00338486 30 M6 x 1 7 7 13 15 222.00338487 45 M6 x 1 7 7 13 5 96.00338488 45 M6 x 1 7 7 13 15 240.00338489 70 M6 x 1 7 7 13 5 108.00338490 70 M6 x 1 7 7 13 15 278.00338491 120 M6 x 1 7 7 13 5 114.00338492 120 M6 x 1 7 7 13 15 296.00
THOMAPLAST®-Insulating Spacer made of PS - cylindrical, external thread (M3 - M4)
Technical specification• Design: cylindrical, hexagon in the middle; with external thread on
both sides• External thread: hot-dip galvanized steel
Item L External thread
P1 P2 WAF Unit Price
mm mm mm mm piece EURO
338493 15 M3 x 0.5 7 7 6 5 64.00338494 15 M3 x 0.5 7 7 6 15 172.00338495 20 M3 x 0.5 7 7 6 5 68.00338496 20 M3 x 0.5 7 7 6 15 176.00338497 25 M3 x 0.5 7 7 6 5 68.00
THOMAPLAST® IV - 2015 41
Fastening Elements Insulating Spacers and Insulators
Item L External thread
P1 P2 WAF Unit Price
mm mm mm mm piece EURO
338498 25 M3 x 0.5 7 7 6 15 176.00338499 30 M3 x 0.5 7 7 6 5 70.00338500 30 M3 x 0.5 7 7 6 15 180.00338501 40 M3 x 0.5 7 7 6 5 70.00338502 40 M3 x 0.5 7 7 6 15 180.00338503 55 M3 x 0.5 7 7 6 5 70.00338504 55 M3 x 0.5 7 7 6 15 180.00338505 15 M4 x 0.7 7 7 9 5 64.00338506 15 M4 x 0.7 7 7 9 15 172.00338507 20 M4 x 0.7 7 7 9 5 68.00338508 20 M4 x 0.7 7 7 9 15 176.00338509 25 M4 x 0.7 7 7 9 5 68.00338510 25 M4 x 0.7 7 7 9 15 176.00338511 30 M4 x 0.7 7 7 9 5 70.00338512 30 M4 x 0.7 7 7 9 15 180.00338513 40 M4 x 0.7 7 7 9 5 70.00338514 40 M4 x 0.7 7 7 9 15 180.00338515 45 M4 x 0.7 7 7 9 5 70.00338516 45 M4 x 0.7 7 7 9 15 180.00338517 55 M4 x 0.7 7 7 9 5 70.00338518 55 M4 x 0.7 7 7 9 15 180.00
THOMAPLAST®-Insulating Spacers made of Polyester - glass fiber reinforced 20 %
General product specification• Thread inserts made of zinc-plated steel, threads mutually insulated• Insulating spacers are available in five different designs: alternatively
cylindrical or as hexagon, each with internal and external thread or with internal thread or external thread on both sides
• Chemical features:Resistant to fuels, brake fluid, mineral, lubricating and heating oils, acids and medium-strong alkalis.
• Material specification:The glass fibre reinforced polyester features high strength, stiffness and dimensional stability, high dimensional stability under heat, favou-rable dielectrical properties, good arc resistance, resistance to UV light and good resistance to weather, as well as good chemical resistance except to alkalis with a pH value >9.
• Temperature range: up to +150 °C• Bending strength: 80 MPa (EN 63)• Modulus of elasticity in bending: 8,000 MPa (EN 63)• Notch impact strength (Charpy): 15 kJ/m2 (ISO 179)• Dimensional stability under heat: > +200 °C (ISO 75), method A• Oxygen index: 23 % (ISO 4589)• Dielectric strength: 18 kV/mm• Dielectric constant: approx. 4.5 at 1 kHz (DIN 53483)• Volume resistivity: >1012 Ohm (DIN 53482)• Comparative tracking index (CTI): >600 (DIN 53480)
THOMAPLAST®-Insulating Spacer made of PEs - cylindrical, external thread
Technical specification• Design: Cylindrical; with external thread on both sides
Item L External thread
External thread (B)
D Unit Price
mm mm piece EURO
311932 10 M3 x 0.5 M3 x 0.5 10 5 52.00311933 10 M3 x 0.5 M3 x 0.5 10 15 140.00311934 10 M3 x 0.5 M3 x 0.5 10 5 52.00311935 10 M3 x 0.5 M3 x 0.5 10 15 140.00311936 10 M3 x 0.5 M3 x 0.5 10 5 52.00311937 10 M3 x 0.5 M3 x 0.5 10 15 140.00311938 10 M3 x 0.5 M3 x 0.5 10 5 72.00311939 10 M3 x 0.5 M3 x 0.5 10 15 194.00311940 14 M3 x 0.5 M3 x 0.5 14 5 72.00311941 14 M3 x 0.5 M3 x 0.5 14 15 194.00311942 14 M4 x 0.7 M4 x 0.7 14 5 60.00311943 14 M4 x 0.7 M4 x 0.7 14 15 164.00311944 14 M5 x 0.8 M4 x 0.7 14 5 60.00311945 14 M5 x 0.8 M4 x 0.7 14 15 164.00311946 14 M5 x 0.8 M5 x 0.8 14 5 60.00311947 14 M5 x 0.8 M5 x 0.8 14 15 164.00311948 14 M6 x 1 M6 x 1 14 5 60.00311949 14 M6 x 1 M6 x 1 14 15 164.00311950 14 M6 x 1 M6 x 1 14 5 60.00311951 14 M6 x 1 M6 x 1 14 15 164.00311952 14 M6 x 1 M6 x 1 14 5 72.00311953 14 M6 x 1 M6 x 1 14 15 194.00
THOMAPLAST®-Insulating Spacer made of PEs - hexagonal, external thread
Technical specification• Design: hexagon on one side; with external thread on both sides
42 THOMAPLAST® IV - 2015
Fastening Elements Insulating Spacers and Insulators
Item L External thread
External thread (B)
D WAF Unit Price
mm mm mm piece EURO
311954 12 M3 x 0.5 M3 x 0.5 10 10 5 86.00311955 12 M3 x 0.5 M3 x 0.5 10 10 15 230.00311956 11 M3 x 0.5 M3 x 0.5 11 11 5 86.00311957 11 M3 x 0.5 M3 x 0.5 11 11 15 230.00311958 14 M3 x 0.5 M3 x 0.5 14 14 5 74.00311959 14 M3 x 0.5 M3 x 0.5 14 14 15 198.00311960 14 M4 x 0.7 M3 x 0.5 14 14 5 74.00311961 14 M4 x 0.7 M3 x 0.5 14 14 15 198.00311962 14 M4 x 0.7 M4 x 0.7 14 14 5 74.00311963 14 M4 x 0.7 M4 x 0.7 14 14 15 198.00311964 14 M4 x 0.7 M6 x 1 14 14 5 74.00311965 14 M4 x 0.7 M6 x 1 14 14 15 198.00311966 14 M5 x 0.8 M5 x 0.8 14 14 5 74.00311967 14 M5 x 0.8 M5 x 0.8 14 14 15 198.00311968 14 M6 x 1 M6 x 1 14 14 5 74.00311969 14 M6 x 1 M6 x 1 14 14 15 198.00311970 14 M6 x 1 M6 x 1 14 14 5 74.00311971 14 M6 x 1 M6 x 1 14 14 15 198.00311972 26 M5 x 0.8 M5 x 0.8 14 14 5 80.00311973 26 M5 x 0.8 M5 x 0.8 14 14 15 214.00311974 26 M8 x 1.25 M8 x 1.25 20 21 5 104.00311975 26 M8 x 1.25 M8 x 1.25 20 21 15 284.00311976 35 M8 x 1.25 M8 x 1.25 20 21 5 124.00311977 35 M8 x 1.25 M8 x 1.25 20 21 15 328.00
THOMAPLAST®-Insulating Spacer made of PEs - hexagonal, internal thread
Technical specification• Design: hexagon on one side; with internal thread on both sides
Item L Internal thread P1
P1 / P2 Internal thread P2
Unit Price
mm mm piece EURO
333769 26 M6 x 1 8 M6 x 1 5 114.00333770 26 M6 x 1 8 M6 x 1 15 302.00333771 26 M8 x 1.25 8 M6 x 1 5 114.00333772 26 M8 x 1.25 8 M6 x 1 15 302.00333773 26 M8 x 1.25 8 M8 x 1.25 5 114.00333774 26 M8 x 1.25 8 M8 x 1.25 15 302.00333775 35 M6 x 1 8 M6 x 1 5 124.00333776 35 M6 x 1 8 M6 x 1 15 328.00333777 35 M8 x 1.25 8 M8 x 1.25 5 124.00333778 35 M8 x 1.25 8 M8 x 1.25 15 328.00
Item L Internal thread P1
P1 / P2 Internal thread P2
Unit Price
mm mm piece EURO
333779 35 M8 x 1.25 8 M8 x 1.25 5 124.00333780 35 M8 x 1.25 8 M8 x 1.25 15 328.00
THOMAPLAST®-Insulating Spacer made of PEs - hexagonal, internal / external thread
Technical specification• Design: hexagon on one side; with internal / external thread
Item L External / Internal thread
P1 P2 WAF Unit Price
mm mm mm mm piece EURO
333791 17 M4 x 0.7 7 10 14 5 98.00333792 17 M4 x 0.7 7 10 14 15 258.00333793 17 M5 x 0.8 7 10 14 5 98.00333794 17 M5 x 0.8 7 10 14 15 258.00333795 26 M6 x 1 8 20 21 5 112.00333796 26 M6 x 1 8 20 21 15 286.00333797 26 M6 x 1 10 10 21 5 112.00333798 26 M6 x 1 10 10 21 15 286.00333799 26 M8 x 1.25 8 10 21 5 112.00333800 26 M8 x 1.25 8 10 21 15 286.00333801 26 M8 x 1.25 8 20 21 5 112.00333802 26 M8 x 1.25 8 20 21 15 286.00333803 35 M6 x 1 8 20 21 5 124.00333804 35 M6 x 1 8 20 21 15 328.00333805 35 M8 x 1.25 8 20 21 5 124.00333806 35 M8 x 1.25 8 20 21 15 328.00
THOMAPLAST®-Insulating Spacers made of PEs-glass fiber reinforced 15 %
General product specification• Available in three designs: conical, drum-type and as hexagon• Internal thread on both sides, threads are mutually insulated• Thread inserts made of steel• Chemical features:
Resistant to fuels, brake fluid, mineral, lubricating and heating oils, acids and medium-strong alkalis
• Material specification:The glass fibre reinforced polyester features high strength, stiffness and dimensional stability, high dimensional stability under heat, favou-rable dielectrical properties, good arc resistance, resistance to UV light and good resistance to weather, as well as good chemical resistance except to alkalis with a pH value >9; particularly suitable for mechani-cally highly loadable components due to glass fibre reinforcement.
THOMAPLAST® IV - 2015 43
Fastening Elements Insulating Spacers and Insulators
THOMAPLAST®-Medium Voltage Insulator made of Epoxy Resin
Product specification• Threads are mutually insulated• Chemical features: Resistant to fuels, lubricants, solvents and hydraulic
fluids; good resistance to weather• Material specification: Very high stability, low shrinkage, favorable
aging behavior, excellent dimensional stability under heat, only slight tendency to stress cracking, very good abrasion resistance
Technical specification• Material: epoxy resin• Colour: red• Material of thread inserts: steel• Density: 1.6 - 2.0 g/cm3 (ASTM D 792)• Max. temperature: +180 °C• Tensile strength: 39.2 / 73.5 N/mm2 (dry / humid) (ASTM D 638)• Bending strength: 78.7 MPa (ASTM D 790)• Pressure resistance: 156.8 N/mm2 (ASTM D 695)• Coefficient of thermal expansion: 20 - 25 x 10-6 K-1
• Coefficient of thermal conductivity: 0.6 W/m x K (DIN 52612)• Dielectric strength: 10 kV/mm (ASTM D 149)• Volume resistivity: 1014 Ohm x cm (DIN 53482)• Comparative track. index (CTI): >600 V (ASTM BS-5901)• Dielectric constant: 4 at 1 MHz• Dielectric loss factor (at 50 Hz): 0.03 (DIN 53485)• Arc resistance: >180 s (ASTM D 495)• Water absorption: 0.04 - 0.1 % (at +23 °C / 24 h)• Tolerance: 1 - 15 mm: ±0.25 mm; 16 - 50 mm: ±0.5 mm;
338347 M6 x 1 16 M10 x 1.5 20 M12 x 1.75 24338349 M6 x 1 16 M10 x 1.5 20 M12 x 1.75 24338351 M6 x 1 16 M12 x 1.75 24 M16 x 2 34338353 M10 x 1.5 20 M16 x 2 34 M20 x 2.5 36338355 M6 x 1 16 M10 x 1.5 25 M16 x 2 55338357 M6 x 1 16 M10 x 1.5 25 M16 x 2 75
Closure ElementsClosure Elements - Caps Elastomers
THOMAPLAST®-Stick-On Disk made of Rubber
Product specification• NR features highest elasticity, tensile strength and flexibility in cold, as
well as an outstanding abrasion resistance and rebound elasticity• Self-adhesive• Suitable for smooth and dry surfaces• Do not leave scuff marks when removed• Slip-resistant• Good resistance to acids and alkalis
Technical specification• Material: NR (natural rubber)• Colour: black• Temperature range: -60 to +80 °C, for a short time +100 °C• Density: approx. 0.97 g/cm3
Application area• Manufacturing, varnishing, transport, protection against moisture
Product specification• High-temperature caps• Versatile end caps for various application areas• Chemical features:
Very good resistance to weak and strong alkalis and acids• Material specification:
Outstanding resistance to environmental influences (weather, ozone); non-toxic, steam sterilizable, suitable for acoustic insulation and vibra-tion damping, good sealing (dirt, environmental effects, leakages)
THOMAPLAST® IV - 2015 47
Closure Elements - Elastomers Caps
Technical specification• Material: TPR (thermoplastic rubber)• Colour: black• Density: 0.97 - 1.08 g/cm3 (ASTM D 297)• Temperature range: -40 to +135 °C, for a short time +150 °C;
good hot air aging behaviour up to +150 °C• Tearing strength: 4 - 16 MPa (ASTM D 412)• Elongation at break: 300 - 550 % (ASTM D 412)• Modulus of elasticity in bending: 7 - 103 MPa (ASTM D 790)• Tear propagation resistance: 18 - 50 kN/m (ASTM D 624)• Compression set: at +25 °C / 22 h: 10 - 35 %,
THOMAPLAST®-Pull Tab Flexicap made of PVC - high-temperature resistant
Product specification• Flexible caps with pull tab, made of PVC (polyvinyl chloride)• Easy removal and fitting• High-temperature masking caps
Technical specification• Material: flexible high-temperature PVC (polyvinyl chloride)• Colour: yellow• Temperature range: -29 to +200 °C, for a short time +230 °C
THOMAPLAST®-Flexicap made of flexible PVC - Standard
Application area• Manufacturing, varnishing, transport, protection against moisture
Product specification• Outstanding insulating properties• Resistant to weather, moisture and chemicals• Flexible caps, quick and easy mounting• Excellently suitable as thread protecting and cover caps, sealings,
insulator caps, color coding• Material specification:
Good resistance to aging, good mechanical stability, soft and flexible, good dielectrical properties, good elongation at break, antiadhesive surface, moderate flame resistance, good temperature resistance
Technical specification• Material: PVC (polyvinyl chloride), high-polish, medium hardness• Colour: black• Shore hardness A: 70°• Temperature range: -30 to +107 °C• Tensile strength: 13.8 N/mm2
THOMAPLAST®-Flexicap made of flexible PVC - temperature-resistant
Product specification• Outstanding insulating properties• Resistant to weather, moisture and chemicals• Flexible caps, quick and easy mounting• Excellently suitable as thread protecting and cover caps, sealings,
insulator caps, color coding• Chemical features:
Limited resistance to strong acids and alkalis, not resistant to petrol and oil.
• Material specification:Good resistance to aging, good mechanical stability, soft and flexible, good dielectrical properties, good elongation at break, antiadhesive surface, moderate flame resistance, good temperature resistance.
THOMAPLAST® IV - 2015 51
Closure Elements - Elastomers Caps
Technical specification• Material: PVC (polyvinyl chloride), high-polish, medium hardness• Colour: black• Shore hardness A: 70°• Temperature range: -30 to +200 °C, for a short time +220 °C• Tensile strength: 13.8 N/mm2
THOMAPLAST®-Round Cap made of EPDM - chemical-resistant
Product specification• Flexible caps are ideal for powder coating and E-coating operations• Suitable for reapplication as cover and for surface treatment• Chemical features:
Very good resistance to acids and alkalis, good resistance to hot water, steam, suds, oxidizing media, polar organic media, e.g. ketones, most flame-resistant hydraulic and brake fluids; resistant to chromium and other electroplating solutions.
• Material specification:Good resistance to weather, ozone and aging; resistant to UV radiation and acid rain, fumes and bitumen; good elastic behavior; good diel-ectrical properties; excellent elongation at break and tearing strength; suitable for electrical and low temperature applications, very long service life, recyclable, can not be solvent cemented, not suitable for food applications.
THOMAPLAST®-Head Cover made of HDPE for Hex Screws / Nuts
Product specification• Chemical features:
Resistant to weak and strong alkalis and acids, except oxidizing acids, and only relatively suitable for hydrofluoric acid; resistant to organic acids, aliphatic hydrocarbons and organic solvents below +60 °C.
• Resistance to weather:The material degrades when exposed to direct sunlight
• Material specification:Excellent impact resistance even at low temperatures, antiadhesive, waxy and soft surface; HDPE features a higher strength and hardness than LDPE, high tearing strength, physiologically safe, good dielectrical properties, very low tendency to swell when in contact with polar fluids (e.g. alcohols, organic acids, esters, ketones etc.) as well as greases, oils and waxes.Due to its chemical properties, the bonding of PE requires special adhesives.
Technical specification• Material: HDPE (polyethylene, rigid, high density)• Colour: black, white, gray or brown• Density: 0.94 - 0.962 g/cm3
• Temperature range: -50 to +80 °C, for a short time +100 °C• Elastic modulus: 700 - 1,400 N/mm2
• Tensile strength: 18 - 35 N/mm2
• Tearing strength: 25 - 32 MPa (DIN 53455)• Elongation at break: 100 - 1000 % (DIN 53455)• Impact resistance:
+20 °C: without break (DIN 53453)-40 °C: 350 kJ/m2 (DIN 53448)
• Ball pressure hardness (10-sec. value): 40 - 60 N/mm2 (DIN 53456)• Surface resistance: 1014 Ohm (DIN 53482)• Volume resistivity: >1017 Ohm x cm (DIN 53482)• Dielectric strength: 30 - 40 kV/mm• Dielectric constant: approx. 2.4 at 100 Hz• Water absorption: 0.05 % (at +23 °C)• Flammability rating: UL 94 HB
54 THOMAPLAST® IV - 2015
Closure Elements - Plastics Caps
Item For thread
h WAF Colour Unit Price
mm mm piece EURO
311400 M4 8.8 7 black 50 22.00311401 M4 8.8 7 black 100 36.00311402 M4 8.8 7 white 50 22.00311403 M4 8.8 7 white 100 36.00311404 M4 8.8 7 grey 50 22.00311405 M4 8.8 7 grey 100 36.00311406 M4 8.8 7 brown 50 22.00311407 M4 8.8 7 brown 100 36.00311408 M5 11 8 black 50 22.00311409 M5 11 8 black 100 36.00311410 M5 11 8 white 50 22.00311411 M5 11 8 white 100 36.00311412 M5 11 8 grey 50 22.00311413 M5 11 8 grey 100 36.00311414 M5 11 8 brown 50 22.00311415 M5 11 8 brown 100 36.00311416 M6 12.8 10 black 50 22.00311417 M6 12.8 10 black 100 36.00311418 M6 12.8 10 white 50 22.00311419 M6 12.8 10 white 100 36.00311420 M6 12.8 10 grey 50 22.00311421 M6 12.8 10 grey 100 36.00311422 M6 12.8 10 brown 50 22.00311423 M6 12.8 10 brown 100 36.00311424 M8 15.8 13 black 50 26.00311425 M8 15.8 13 black 100 38.00311426 M8 15.8 13 white 50 26.00311427 M8 15.8 13 white 100 38.00311428 M8 15.8 13 grey 50 26.00311429 M8 15.8 13 grey 100 38.00311430 M8 15.8 13 brown 50 26.00311431 M8 15.8 13 brown 100 38.00311432 M10 19 16 black 50 54.00311433 M10 19 16 black 100 92.00311434 M10 19 16 white 50 54.00311435 M10 19 16 white 100 92.00311436 M10 19 16 grey 50 54.00311437 M10 19 16 grey 100 92.00311438 M10 19 16 brown 50 54.00311439 M10 19 16 brown 100 92.00311448 M10 20 17 black 50 54.00311449 M10 20 17 black 100 92.00311450 M10 20 17 white 50 54.00311451 M10 20 17 white 100 92.00311452 M10 20 17 grey 50 54.00311453 M10 20 17 grey 100 92.00311454 M10 20 17 brown 50 54.00311455 M10 20 17 brown 100 92.00311456 M12 20 18 black 25 30.00311457 M12 20 18 black 50 52.00311458 M12 20 18 white 25 30.00311459 M12 20 18 white 50 52.00311460 M12 20 18 grey 25 30.00311461 M12 20 18 grey 50 52.00311462 M12 20 18 brown 25 30.00
Item For thread
h WAF Colour Unit Price
mm mm piece EURO
311463 M12 20 18 brown 50 52.00311464 M12 21 19 black 50 34.00311465 M12 21 19 black 100 58.00311466 M12 21 19 white 50 34.00311467 M12 21 19 white 100 58.00311468 M12 21 19 grey 50 34.00311469 M12 21 19 grey 100 58.00311470 M12 21 19 brown 50 34.00311471 M12 21 19 brown 100 58.00311480 M14 23.8 22 black 50 50.00311481 M14 23.8 22 black 100 85.00311482 M14 23.8 22 white 50 58.00311483 M14 23.8 22 white 100 85.00311484 M14 23.8 22 grey 50 58.00311485 M14 23.8 22 grey 100 85.00311486 M14 23.8 22 brown 50 58.00311487 M14 23.8 22 brown 100 85.00311488 M16 26.5 24 black 50 54.00311489 M16 26.5 24 black 100 92.00311490 M16 26.5 24 white 50 54.00311491 M16 26.5 24 white 100 92.00311492 M16 26.5 24 grey 50 54.00311493 M16 26.5 24 grey 100 92.00311494 M16 26.5 24 brown 50 54.00311495 M16 26.5 24 brown 100 92.00311496 M18 30.5 27 black 25 52.00311497 M18 30.5 27 black 50 84.00311498 M18 30.5 27 white 25 52.00311499 M18 30.5 27 white 50 84.00311500 M18 30.5 27 grey 25 52.00311501 M18 30.5 27 grey 50 84.00311502 M18 30.5 27 brown 25 52.00311503 M18 30.5 27 brown 50 84.00311512 M20 31.5 30 black 25 58.00311513 M20 31.5 30 black 50 88.00311514 M20 31.5 30 white 25 58.00311515 M20 31.5 30 white 50 88.00311516 M20 31.5 30 grey 25 58.00311517 M20 31.5 30 grey 50 88.00311518 M20 31.5 30 brown 25 58.00311519 M20 31.5 30 brown 50 88.00311520 M24 39 36 black 10 22.00311521 M24 39 36 black 25 56.00311522 M24 39 36 white 10 22.00311523 M24 39 36 white 25 56.00
THOMAPLAST®-Screw Cap made of HDPE - POZIDRIV
Technical specification• Material: HDPE (polyethylene, rigid, high density)• Colour: white• Temperature range: -50 to +80 °C, for a short time +100 °C
Product specification• Developed for mounting of cheese head screws (Form A), screws with
beveled head (B) and countersunk head screws (Form C).• Protect sensitive materials, such as lacquer, enamel, glass, textiles,
ceramics etc.• Cover caps protect from mechanical damage and splash water, and
serve as decoration.• Outstandingly suited for furniture industry, car body and apparatus
construction, yacht construction.
Technical specification• Material: HDPE (polyethylene, rigid, high density)• Colour:
Cover caps: black or whiteWashers: natural
• Temperature range: -50 to +80 °C, for a short time +100 °C
Item For thread
d d1 D H Colour Unit Price
mm mm mm mm piece EURO
311376 M4, M5 5 10 14.5 5 white 50 22.00311377 M4, M5 5 10 14.5 5 white 100 38.00311378 M4, M5 5 10 14.5 5 black 50 22.00311379 M4, M5 5 10 14.5 5 black 100 38.00311380 M5 5.2 9.5 14.5 5 white 50 25.00311381 M5 5.2 9.5 14.5 5 white 100 44.00311382 M5 5.2 9.5 14.5 5 black 50 25.00311383 M5 5.2 9.5 14.5 5 black 100 44.00
56 THOMAPLAST® IV - 2015
Closure Elements - Plastics Caps
Item For thread
d d1 D H Colour Unit Price
mm mm mm mm piece EURO
311384 M5, M6 6 12.9 19.5 8 white 50 35.00311385 M5, M6 6 12.9 19.5 8 white 100 58.00311386 M5, M6 6 12.9 19.5 8 black 50 35.00311387 M5, M6 6 12.9 19.5 8 black 100 58.00311388 M4, M5 5 10 14.5 7 white 50 22.00311389 M4, M5 5 10 14.5 7 white 100 38.00311390 M4, M5 5 10 14.5 7 black 50 22.00311391 M4, M5 5 10 14.5 7 black 100 38.00311392 M5, M6 6 9.5 14.5 7 white 50 25.00311393 M5, M6 6 9.5 14.5 7 white 100 44.00311394 M5, M6 6 9.5 14.5 7 black 50 25.00311395 M5, M6 6 9.5 14.5 7 black 100 44.00311396 M5, M6 6 19.5 8 white 50 35.00311397 M5, M6 6 19.5 8 white 100 58.00311398 M5, M6 6 19.5 8 black 50 35.00311399 M5, M6 6 19.5 8 black 100 58.00
THOMAPLAST®-Pipe Protection Cap made of LDPE
Product specification• Protect pipes from ingress of water and other materials• Chemical features:
Good chemical resistance to alkalis, salt solutions, organic and inorganic acids, except oxidizing acids, as well as organic solvents below +60 °C. Unstable to aromatics, aliphatics and chlorinated hydrocarbons.
• Resistance to weather:The material degrades when exposed to direct sunlight
• Material specification:LDPE is relatively flexible and soft, physiologically safe, excellent impact resistance even at low temperatures; antiadhesive, waxy and soft surface; high tearing strength; a high-quality electrical insulating material.Due to its chemical properties, the bonding of PE requires special adhesives.
• Temperature range: -30 to +60 °C, for a short time +80 °C• Elastic modulus: 220 - 400 N/mm2
• Tensile strength: 8 - 23 N/mm2
• Tearing strength: 15 - 20 MPa (DIN 53455)• Elongation at break: 300 - 1000 % (DIN 53455)• Impact resistance:
+20 °C: without break (DIN 53453)-40 °C: 300 kJ/m2 (DIN 53448)
• Surface resistance: 1014 Ohm (DIN 53482)• Volume resistivity: 1017 Ohm x cm (DIN 53482)• Dielectric strength: 30 - 40 kV/mm• Dielectric constant: 2.3 at 100 kHz• Water absorption: <0.1 % (ISO 62)
Product specification• Ideal for housings and cases• Easy to fit, simply push the grommet feet into punched or drilled holes• Chemical features: Good resistance to weak acids and weak alkalis,
Application area• Manufacturing, varnishing, transport, protection against moisture
Product specification• Extremely resistant to abrasion• Ideally suitable for threaded holes• Chemical features: Good resistance to weak acids and weak alkalis, as
Application area• Manufacturing, varnishing, transport, protection against moisture
Product specification• Protect threaded or plain components• Handy pull-tab for easy removal• Ideal for hydraulic and general engineering applications• Chemical features:
Very good resistance to weak and strong alkalis and acids.• Material specification:
Outstanding resistance to environmental influences (weather, ozone); non-toxic, steam sterilizable, suitable for acoustic insulation and vibra-tion damping, good sealing (dirt, environmental effects, leakages).
Technical specification• Material: TPR (thermoplastic rubber)• Colour: black• Density: 0.97 - 1.08 g/cm3 (ASTM D 297)• Temperature range: -40 to +135 °C, for a short time +150 °C;
good hot air aging behaviour up to +150 °C• Tearing strength: 4 - 16 MPa (ASTM D 412)• Elongation at break: 300 - 550 % (ASTM D 412)• Modulus of elasticity in bending: 7 - 103 MPa (ASTM D 790)• Tear propagation resistance: 18 - 50 kN/m (ASTM D 624)• Compression set: at +25 °C / 22 h: 10 - 35 %,
THOMAPLAST®-Flexiplug made of High-Temperature PVC
Product specification• Flexible high-temperature plugs• Resistant to tearing, splitting and shredding• For high-temperature applications• Chemical features: Good resistance to strong and weak acids, as well
as weak alkalis, but only moderate resistance when exposed to direct sunlight
Application area• Manufacturing, varnishing, transport, protection against moisture
Product specification• Temperature-resistant masking plugs• Protect hole without masking surrounding area• Tapered shank with hollow core• Each plug fits a range of thread sizes• Chemical features:
Very good resistance to weak and strong alkalis and acids.• Material specification:
Outstanding resistance to environmental influences (weather, ozone); non-toxic, steam sterilizable, suitable for acoustic insulation and vibra-tion damping, good sealing (dirt, environmental effects, leakages)
Technical specification• Material: TPR (thermoplastic rubber)• Colour: black• Density: 0.97 - 1.08 g/cm3 (ASTM D 297)• Temperature range: -40 to +135 °C, for a short time +150 °C;
good hot air aging behaviour up to +150 °C• Tearing strength: 4 - 16 MPa (ASTM D 412)• Elongation at break: 300 - 550 % (ASTM D 412)• Modulus of elasticity in bending: 7 - 103 MPa (ASTM D 790)• Tear propagation resistance: 18 - 50 kN/m (ASTM D 624)• Compression set:
at +25 °C / 22 h: 10 - 35 %at +100 °C / 22 h: 15 - 55 % (ASTM D 95)
1 only available with smooth shank 2 also available in PVC
THOMAPLAST®-Tapered Plug made of EPDM - chemical-resistant
Application area• Drain plugs• Protect test tubes against evaporation
Product specification• Flexible plugs• Suitable for reapplication as cover and for surface treatment• The tapered design allows these plugs to fit different openings
Technical specification• Material: EPDM (ethylene-propylene-diene rubber)• Colour: black• Temperature range: -40 to +120 °C
Item D d h For thread Unit Price mm mm mm piece EURO
THOMAPLAST®-High-Therm Tapered Plug made of Silicone - high-temperature resistant
Product specification• Extra high-temperature resistant tapered plugs, suitable for applica-
tions with Elco varnishing systems and EPL powder coating systems• Reusable• No color bleeding, thus clean thread pitches and surfaces• Easy removal and fitting• Material specification:
Very elastic; high elongation at break and tearing strength; suitable for low temperature applications; very long service life; reusable; no curing and melting
Technical specification• Material: silicone (silicone rubber)• Colour: red• Temperature range: -76 to +280 °C, for a short time +300 °C• Shore hardness A: 50° - 60°, 70° for greater dimensions• Tearing strength: 16 N/mm• Elongation at break: 300 %• Breaking strength: 6 MPa
Item D d h For thread Unit Price mm mm mm piece EURO
THOMAPLAST®-High-Therm Plug made of Silicone - conical
Product specification• These temperature-resistant products protect boreholes with and
without thread as well as studs, and are recommended for high-temperature applications such as powder coating, stove enameling, spray painting, plating and anodizing.
• Reusable• Available in two designs:
Type 1: solid plugsType 2: with hollowed centre as a cost-efficient alternative in larger sizes
• Chemical features:Resistant to weak acids and alkalis, as well as to many organic solvents.
• Material specification:Excellent resistance to aging, weather, sunlight, bacterial and fungal infestation; physiologically safe; highest gas permeability, highest low-temperature flexibility.
Good resistance to weak acids, weak and strong alkalis, salt solutions; resistant to organic acids, aliphatic hydrocarbons, as well as organic solvents below +60 °C.
• Resistance to weather:The material degrades when exposed to direct sunlight
• Material specification:LDPE is relatively flexible and soft, physiologically safe, excellent impact resistance even at low temperatures; antiadhesive, waxy and soft surface; high tearing strength; a high-quality electrical insulating material.Due to its chemical properties, the bonding of PE requires special adhesives.
• Temperature range: -30 to +60 °C, for a short time +80 °C• Elastic modulus: 220 - 400 N/mm2
• Tensile strength: 8 - 23 N/mm2
• Tearing strength: 15 - 20 MPa (DIN 53455)• Elongation at break: 300 - 1000 % (DIN 53455)• Impact resistance: +20 °C: without break (DIN 53453),
-40 °C: 300 kJ/m2 (DIN 53448)• Surface resistance: 1014 Ohm (DIN 53482)• Volume resistivity: 1017 Ohm x cm (DIN 53482)• Dielectric strength: 30 - 40 kV/mm• Dielectric constant: 2.3 at 100 Hz• Water absorption: <0.1 % (ISO 62)
THOMAPLAST®-Barrel Plug made of LDPE - with flat top
Product specification• The quick-fit barrel plugs are easy to fit and remove• General-purpose plugs for a wide range of applications• Convexed sides to ensure secure fit
Technical specification• Material: LDPE (low density polyethylene, soft)• Colour: natural
THOMAPLAST® IV - 2015 69
Closure Elements - Plastics Plugs
Item D d H h For thread Unit Price mm mm mm mm piece EURO
Product specification• Protect pipes from ingress of water and other materials• Chemical features:
Resistant to weak and strong alkalis and acids, except oxidizing acids, and only relatively suitable for hydrofluoric acid; resistant to organic acids, aliphatic hydrocarbons and organic solvents below +60 °C.
• Resistance to weather:The material degrades when exposed to direct sunlight
Technical specification• Material: LDPE (low density polyethylene, soft)• Colour: black or white• Density: 0.94 - 0.962 g/cm3
• Temperature range: -50 to +80 °C, for a short time +100 °C• Elastic modulus: 700 - 1,400 N/mm2
• Tensile strength: 18 - 35 N/mm2
• Tearing strength: 25 - 32 MPa (DIN 53455)• Elongation at break: 100 - 1000 % (DIN 53455)• Impact resistance: +20 °C: without break (DIN 53453);
-40 °C: 350 kJ/m2 (DIN 53448)• Ball pressure hardness (10-sec. value): 40 - 60 N/mm2 (DIN 53456)• Surface resistance: 1014 Ohm (DIN 53482)• Volume resistivity: >1017 Ohm x cm (DIN 53482)• Dielectric strength: 30 - 40 kV/mm• Dielectric constant: approx. 2.4 at 100 Hz• Water absorption: 0.05 % (at +23 °C)• Flammability rating: UL 94 HB
70 THOMAPLAST® IV - 2015
Closure Elements - Plastics Plugs
Item D d h Colour Unit Price mm mm mm piece EURO
311528 6.4 4 5.3 black 50 11.00311529 6.4 4 5.3 black 100 19.00311530 6.4 4 5.3 white 50 11.00311531 6.4 4 5.3 white 100 19.00311532 13 4 5.3 black 50 11.00311533 13 4 5.3 black 100 19.00311534 13 4 5.3 white 50 11.00311535 13 4 5.3 white 100 19.00311536 8 4.1 7 black 50 11.00311537 8 4.1 7 black 100 19.00311538 8 4.1 7 white 50 11.00311539 8 4.1 7 white 100 19.00311540 6.6 5 5.5 black 50 11.00311541 6.6 5 5.5 black 100 19.00311542 6.6 5 5.5 white 50 11.00311543 6.6 5 5.5 white 100 19.00311544 8 5 5 black 50 11.00311545 8 5 5 black 100 19.00311546 8 5 5 white 50 11.00311547 8 5 5 white 100 19.00311548 10 5 5.5 black 50 11.00311549 10 5 5.5 black 100 19.00311550 10 5 5.5 white 50 11.00311551 10 5 5.5 white 100 19.00311552 13 5 5.5 black 50 11.00311553 13 5 5.5 black 100 19.00311554 13 5 5.5 white 50 11.00311555 13 5 5.5 white 100 19.00311560 13 5.2 7 black 50 11.00311561 13 5.2 7 black 100 19.00311562 13 5.2 7 white 50 11.00311563 13 5.2 7 white 100 19.00311564 8 5.4 7.5 black 50 11.00311565 8 5.4 7.5 black 100 19.00311566 8 5.4 7.5 white 50 11.00311567 8 5.4 7.5 white 100 19.00311568 10 5.4 7.4 black 50 11.00311569 10 5.4 7.4 black 100 19.00311570 10 5.4 7.4 white 50 11.00311571 10 5.4 7.4 white 100 19.00311572 13 5.4 7.4 black 50 11.00311573 13 5.4 7.4 black 100 19.00311574 13 5.4 7.4 white 50 11.00311575 13 5.4 7.4 white 100 19.00311576 15 5.4 7.4 black 50 11.00311577 15 5.4 7.4 black 100 19.00
Item D d h Colour Unit Price mm mm mm piece EURO
311578 15 5.4 7.4 white 50 11.00311579 15 5.4 7.4 white 100 19.00311580 10 5.5 5.6 black 50 11.00311581 10 5.5 5.6 black 100 19.00311582 10 5.5 5.6 white 50 11.00311583 10 5.5 5.6 white 100 19.00311584 15 5.5 5.6 black 50 11.00311585 15 5.5 5.6 black 100 19.00311586 15 5.5 5.6 white 50 11.00311587 15 5.5 5.6 white 100 19.00311588 8 6 5.4 black 50 11.00311589 8 6 5.4 black 100 19.00311590 8 6 5.4 white 50 11.00311591 8 6 5.4 white 100 19.00311592 10 6 5.4 black 50 11.00311593 10 6 5.4 black 100 19.00311594 10 6 5.4 white 50 11.00311595 10 6 5.4 white 100 19.00311596 13 6 5.4 black 50 11.00311597 13 6 5.4 black 100 19.00311598 13 6 5.4 white 50 11.00311599 13 6 5.4 white 100 19.00311600 15 6 5.4 black 50 11.00311601 15 6 5.4 black 100 19.00311602 15 6 5.4 white 50 11.00311603 15 6 5.4 white 100 19.00311604 13 6.6 7 black 50 11.00311605 13 6.6 7 black 100 19.00311606 13 6.6 7 white 50 11.00311607 13 6.6 7 white 100 19.00311608 10 7 3.9 black 50 11.00311609 10 7 3.9 black 100 19.00311610 10 7 3.9 white 50 11.00311611 10 7 3.9 white 100 19.00311612 10 7 6.5 black 50 11.00311613 10 7 6.5 black 100 19.00311614 10 7 6.5 white 50 11.00311615 10 7 6.5 white 100 19.00311616 13 7 6.5 black 50 11.00311617 13 7 6.5 black 100 19.00311618 13 7 6.5 white 50 11.00311619 13 7 6.5 white 100 19.00311620 15 7 6.5 black 50 11.00311621 15 7 6.5 black 100 19.00311622 15 7 6.5 white 50 11.00311623 15 7 6.5 white 100 19.00311624 10 8 6.3 black 50 11.00311625 10 8 6.3 black 100 19.00311626 10 8 6.3 white 50 11.00311627 10 8 6.3 white 100 19.00311628 13 8 6.3 black 50 11.00311629 13 8 6.3 black 100 19.00311630 13 8 6.3 white 50 11.00311631 13 8 6.3 white 100 19.00311632 15 8 6.3 black 50 11.00311633 15 8 6.3 black 100 19.00
THOMAPLAST® IV - 2015 71
Closure Elements - Plastics Plugs
Item D d h Colour Unit Price mm mm mm piece EURO
311634 15 8 6.3 white 50 11.00311635 15 8 6.3 white 100 19.00311636 13 8.5 6.9 black 50 11.00311637 13 8.5 6.9 black 100 19.00311638 13 8.5 6.9 white 50 11.00311639 13 8.5 6.9 white 100 19.00311640 15 8.5 6.9 black 50 11.00311641 15 8.5 6.9 black 100 19.00311642 15 8.5 6.9 white 50 11.00311643 15 8.5 6.9 white 100 19.00311644 13 9 6.4 black 50 11.00311645 13 9 6.4 black 100 19.00311646 13 9 6.4 white 50 11.00311647 13 9 6.4 white 100 19.00311648 15 9 6.4 black 50 11.00311649 15 9 6.4 black 100 19.00311650 15 9 6.4 white 50 11.00311651 15 9 6.4 white 100 19.00311652 13 10 3 black 50 11.00311653 13 10 3 black 100 19.00311654 13 10 3 white 50 11.00311655 13 10 3 white 100 19.00311656 13 10 6.7 black 50 11.00311657 13 10 6.7 black 100 19.00311658 13 10 6.7 white 50 11.00311659 13 10 6.7 white 100 19.00311660 15 10 6.7 black 50 11.00311661 15 10 6.7 black 100 19.00311662 15 10 6.7 white 50 11.00311663 15 10 6.7 white 100 19.00311664 13 10.5 4 black 50 11.00311665 13 10.5 4 black 100 19.00311666 13 10.5 4 white 50 11.00311667 13 10.5 4 white 100 19.00311668 13 11 5 black 50 11.00311669 13 11 5 black 100 19.00311670 13 11 5 white 50 11.00311671 13 11 5 white 100 19.00311672 15 11 5 black 50 11.00311673 15 11 5 black 100 19.00311674 15 11 5 white 50 11.00311675 15 11 5 white 100 19.00311676 15 12 8.4 black 50 11.00311677 15 12 8.4 black 100 19.00311678 15 12 8.4 white 50 11.00311679 15 12 8.4 white 100 19.00311680 18 12 7 black 50 16.00311681 18 12 7 black 100 28.00311682 18 12 7 white 50 16.00311683 18 12 7 white 100 28.00311684 16 13 8.5 black 50 14.00311685 16 13 8.5 black 100 22.00311686 16 13 8.5 white 50 14.00311687 16 13 8.5 white 100 22.00311688 17 15 9 black 50 16.00311689 17 15 9 black 100 28.00
Item D d h Colour Unit Price mm mm mm piece EURO
311690 17 15 9 white 50 16.00311691 17 15 9 white 100 28.00311692 20 15 4 black 50 22.00311693 20 15 4 black 100 38.00311694 20 15 4 white 50 22.00311695 20 15 4 white 100 38.00311696 19 15.5 4.5 black 50 22.00311697 19 15.5 4.5 black 100 38.00311698 19 15.5 4.5 white 50 22.00311699 19 15.5 4.5 white 100 38.00
Finned Plugs made of LDPE
General product specification• Protect floors from getting cracked and scratched by heavy metal feet
of machines, worktables or the like• Chemical features: good resistance to weak acids, weak and strong
alkalis; resistant to organic acids, aliphatic hydrocarbons, as well as organic solvents below +60 °C.
• Resistance to weather: the material degrades when exposed to direct sunlight
• Material specification: LDPE is relatively flexible and soft, physiologi-cally safe, excellent impact resistance even at low temperatures; anti-adhesive, waxy and soft surface; high tearing strength; a high-quality electrical insulating material.
• Due to its chemical properties, the bonding of PE requires special adhesives.
General technical specification• Material: LDPE (low density polyethylene)• Density: 0.915 - 0.926 g/cm3
• Temperature range: -30 to +60 °C, for a short time +80 °C• Elastic modulus: 220 - 400 N/mm2
• Tensile strength: 8 - 23 N/mm2
• Tearing strength: 15 - 20 MPa (DIN 53455)• Elongation at break: 300 - 1000 % (DIN 53455)• Impact resistance: +20 °C: without break (DIN 53453);
-40 °C: 300 kJ/m2 (DIN 53448)• Surface resistance: 1014 Ohm (DIN 53482)• Volume resistivity: 1017 Ohm x cm (DIN 53482)• Dielectric strength: 30 - 40 kV/mm• Dielectric constant: 2.3 at 100 Hz• Water absorption: <0.1 % (ISO 62)
THOMAPLAST®-Finned Plug made of LDPE - rectangular
72 THOMAPLAST® IV - 2015
Closure Elements - Plastics Plugs
Technical specification• Material: LDPE (low density polyethylene, soft)• Colour: black
Item L L1 h h1 g Unit Price mm mm mm mm mm piece EURO
Product specification• Fitting without any problems• The spark-eroded surface is ideally suitable for applications requiring
an attractive finish
Technical specification• Material: LDPE (low density polyethylene,soft)• Colour: black or white
Item L h h1 g Colour Unit Price mm mm mm mm piece EURO
315810 10 11.5 4 1.5 - 2 black 50 52.00315811 10 11.5 4 1.5 - 2 black 100 82.00315812 12 11.5 4 1.5 - 2 black 50 54.00315813 12 11.5 4 1.5 - 2 black 100 90.00315814 13 11.5 5 1.5 - 2 black 50 56.00315815 13 11.5 5 1.5 - 2 black 100 96.00315816 15 11.5 4 0.8 - 2 white 50 56.00315817 15 11.5 4 0.8 - 2 white 100 96.00315818 15 11.5 4 0.8 - 2 black 50 58.00315819 15 11.5 4 0.8 - 2 black 100 98.00315820 16 11.5 5 0.8 - 2.5 white 25 30.00315821 16 11.5 5 0.8 - 2.5 white 50 52.00315822 16 11.5 5 0.8 - 2.5 black 25 30.00315823 16 11.5 5 0.8 - 2.5 black 50 52.00315824 18 16.5 5 1.2 - 1.5 black 25 34.00315825 18 16.5 5 1.2 - 1.5 black 50 56.00315826 19 11.5 5 0.8 - 2.5 white 25 44.00315827 19 11.5 5 0.8 - 2.5 white 50 74.00315828 19 11.5 5 0.8 - 2.5 black 25 46.00315829 19 11.5 5 0.8 - 2.5 black 50 82.00315830 20 11.5 5 0.8 - 2.5 white 25 36.00315831 20 11.5 5 0.8 - 2.5 white 50 58.00315832 20 11.5 5 0.8 - 2.5 black 25 36.00315833 20 11.5 5 0.8 - 2.5 black 50 58.00315834 22 11.5 5 0.8 - 2.5 black 25 38.00315835 22 11.5 5 0.8 - 2.5 black 50 66.00315836 25 11.5 5 1 - 2.5 white 25 42.00315837 25 11.5 5 1 - 2.5 white 50 74.00315838 25 11.5 5 1 - 2.5 black 25 42.00315839 25 11.5 5 1 - 2.5 black 50 74.00315840 25.4 11.5 5 1 - 2.5 white 25 56.00315841 25.4 11.5 5 1 - 2.5 white 50 94.00315842 25.4 11.5 5 1 - 2.5 black 25 56.00315843 25.4 11.5 5 1 - 2.5 black 50 94.00315844 28.6 12.4 5 1 - 2 black 10 28.00315845 28.6 12.4 5 1 - 2 black 25 58.00
Item L h h1 g Colour Unit Price mm mm mm mm piece EURO
315846 30 11.5 5 1 - 3 white 25 50.00315847 30 11.5 5 1 - 3 white 50 84.00315848 30 11.5 5 1 - 3 black 10 28.00315849 30 11.5 5 1 - 3 black 25 58.00315850 32 11.5 5 1 - 3 black 25 50.00315851 32 11.5 5 1 - 3 black 50 84.00315852 35 11.5 5 1 - 3 white 10 46.00315853 35 11.5 5 1 - 3 white 25 98.00315854 35 11.5 5 1 - 3 black 10 36.00315855 35 11.5 5 1 - 3 black 25 76.00315856 38 14.5 5 1 - 3 white 10 46.00315857 38 14.5 5 1 - 3 white 25 98.00315858 38 14.5 5 1 - 3 black 10 46.00315859 38 14.5 5 1 - 3 black 25 98.00315860 40 14.5 5 1 - 3 white 5 24.00315861 40 14.5 5 1 - 3 white 15 62.00315862 40 14.5 5 1 - 3 black 5 24.00315863 40 14.5 5 1 - 3 black 15 62.00315864 45 14.5 5 1 - 3 black 5 28.00315865 45 14.5 5 1 - 3 black 15 70.00315866 50 14.5 5 1 - 3 black 5 50.00315867 50 14.5 5 1 - 3 black 15 126.00315868 50 18 6.6 3 - 5 white 5 52.00315869 50 18 6.6 3 - 5 white 15 134.00315870 50 18 6.6 3 - 5 black 5 52.00315871 50 18 6.6 3 - 5 black 15 135.00315872 55 14.5 5 2 - 4 black 5 64.00315873 55 14.5 5 2 - 4 black 15 162.00315874 60 24.3 5 3 - 4 black 5 52.00315875 60 24.3 5 3 - 4 black 15 132.00315876 60 14.5 5 1 - 3 white 5 62.00315877 60 14.5 5 1 - 3 white 15 156.00315878 65 14.5 6 1 - 3 black 5 96.00315879 65 14.5 6 1 - 3 black 15 238.00315880 70 22 6 2.5 - 5 white 5 64.00315881 70 22 6 2.5 - 5 white 15 162.00315882 70 22 6 2.5 - 5 black 5 64.00315883 70 22 6 2.5 - 5 black 15 162.00315884 75 22 6 2 - 4 white 5 80.00315885 75 22 6 2 - 4 white 15 202.00315886 75 22 6 2 - 4 black 5 80.00315887 75 22 6 2 - 4 black 15 202.00315888 80 22 6 2 - 4 white 5 88.00315889 80 22 6 2 - 4 white 15 222.00315890 80 22 6 2 - 4 black 5 88.00315891 80 22 6 2 - 4 black 15 222.00315894 100 22 7 2 - 4 white 5 108.00315895 100 22 7 2 - 4 white 15 274.00315896 100 22 7 2 - 4 black 5 108.00315897 100 22 7 2 - 4 black 15 274.00
74 THOMAPLAST® IV - 2015
Closure Elements - Plastics Plugs
THOMAPLAST®-Finned Plug made of LDPE - round
Product specification• Ribbed for easy mounting and secure fit• For covering of sharp pipe edges
Technical specification• Material: LDPE (low density polyethylene,soft)
Item D h h1 g Colour Unit Price mm mm mm mm piece EURO
315904 10 11.5 3.5 0.8 - 2 black 50 35.00315905 10 11.5 3.5 0.8 - 2 black 100 60.00315906 12 11.5 3.5 0.8 - 2 black 50 42.00315907 12 11.5 3.5 0.8 - 2 black 100 70.00315908 13 11.5 4 0.8 - 2 black 50 42.00315909 13 11.5 4 0.8 - 2 black 100 70.00315910 14 11.5 5 1.5 - 2 black 50 44.00315911 14 11.5 5 1.5 - 2 black 100 76.00315912 15 11.5 3 0.8 - 2 black 50 44.00315913 15 11.5 3 0.8 - 2 black 100 76.00315914 16 11.5 5 0.8 - 2 white 50 48.00315915 16 11.5 5 0.8 - 2 white 100 83.00315916 16 11.5 5 0.8 - 2 black 50 48.00315917 16 11.5 5 0.8 - 2 black 100 83.00315918 18 11.5 5 0.8 - 2 black 50 48.00315919 18 11.5 5 0.8 - 2 black 100 84.00315920 19 11.5 5 0.8 - 2 black 50 52.00315921 19 11.5 5 0.8 - 2 black 100 90.00315922 20 11.5 5 0.8 - 2 white 50 58.00315923 20 11.5 5 0.8 - 2 white 100 98.00315924 20 11.5 5 0.8 - 2 black 50 58.00315925 20 11.5 5 0.8 - 2 black 100 98.00315926 21 11.5 5 0.8 - 2 black 25 36.00315927 21 11.5 5 0.8 - 2 black 50 64.00315928 22 11.5 5 0.8 - 2 black 25 32.00315929 22 11.5 5 0.8 - 2 black 50 54.00315930 23 11.5 5 0.8 - 2.5 black 25 42.00315931 23 11.5 5 0.8 - 2.5 black 50 70.00315932 24 11.5 5 1 - 2.5 black 25 43.00315933 24 11.5 5 1 - 2.5 black 50 72.00315934 25 11.5 5 1 - 3 white 25 43.00315935 25 11.5 5 1 - 3 white 50 72.00315936 25 11.5 5 1 - 3 black 25 43.00315937 25 11.5 5 1 - 3 black 50 72.00315938 25.4 11.5 5 1 - 3 black 25 43.00315939 25.4 11.5 5 1 - 3 black 50 72.00315940 26 11.5 5 1 - 3 black 25 50.00315941 26 11.5 5 1 - 3 black 50 84.00315942 28 11.5 5 1 - 3 black 25 44.00315943 28 11.5 5 1 - 3 black 50 74.00315944 28.6 11.5 5 1 - 3 black 25 52.00315945 28.6 11.5 5 1 - 3 black 50 88.00315946 30 11.5 5 1 - 3 white 25 52.00315947 30 11.5 5 1 - 3 white 50 88.00315948 30 11.5 5 1 - 3 black 25 52.00315949 30 11.5 5 1 - 3 black 50 88.00315952 32 11.5 5 1 - 3 white 25 58.00315953 32 11.5 5 1 - 3 white 50 100.00315954 32 11.5 5 1 - 3 black 25 58.00
Item D h h1 g Colour Unit Price mm mm mm mm piece EURO
315955 32 11.5 5 1 - 3 black 50 100.00315956 34 11.5 5 1 - 3 black 25 86.00315957 34 11.5 5 1 - 3 black 50 144.00315958 35 11.5 5 1 - 3 white 25 64.00315959 35 11.5 5 1 - 3 white 50 106.00315960 35 11.5 5 1 - 3 black 25 64.00315961 35 11.5 5 1 - 3 black 50 106.00315962 37 11.5 5 1 - 3 black 25 90.00315963 37 11.5 5 1 - 3 black 50 152.00315964 38 11.5 5 1 - 3 black 25 58.00315965 38 11.5 5 1 - 3 black 50 115.00315966 40 11.5 5 1 - 3 white 25 72.00315967 40 11.5 5 1 - 3 white 50 124.00315968 40 11.5 5 1 - 3 black 25 72.00315969 40 11.5 5 1 - 3 black 50 124.00315970 42 11.5 5 1 - 3 black 25 84.00315971 42 11.5 5 1 - 3 black 50 140.00315972 45 11.5 5 1 - 3 black 10 52.00315973 45 11.5 5 1 - 3 black 25 108.00315974 50 14.5 5 1 - 3 white 10 52.00315975 50 14.5 5 1 - 3 white 25 108.00315976 50 14.5 5 1 - 3 black 10 58.00315977 50 14.5 5 1 - 3 black 25 126.00315978 50.8 14.5 5 1 - 3 black 10 50.00315979 50.8 14.5 5 1 - 3 black 25 106.00315980 55 11.5 5 1 - 3 black 5 58.00315981 55 11.5 5 1 - 3 black 15 138.00315982 60 14.5 5 1 - 3 black 10 62.00315983 60 14.5 5 1 - 3 black 25 132.00315984 60 20.1 6 3.5 - 5 white 10 62.00315985 60 20.1 6 3.5 - 5 white 25 132.00315986 60 20.1 6 3.5 - 5 black 10 62.00315987 60 20.1 6 3.5 - 5 black 25 132.00315988 65 14.5 5 1 - 3 black 5 74.00315989 65 14.5 5 1 - 3 black 15 186.00315990 70 21 5 2 - 4.5 black 5 78.00315991 70 21 5 2 - 4.5 black 15 194.00315992 75 22 6 2 - 4 black 5 50.00315993 75 22 6 2 - 4 black 15 126.00315994 76.2 22 6 2 - 4 black 5 50.00315995 76.2 22 6 2 - 4 black 15 126.00315996 80 21 4 1.5 - 3 black 5 70.00315997 80 21 4 1.5 - 3 black 15 172.00315998 90 20 5 2.5 - 5 black 5 70.00315999 90 20 5 2.5 - 5 black 15 172.00
THOMAPLAST®-Threaded Protection Plug made of LDPE
Product specification• Suitable for BSP/Gas thread and M-thread• Easy-to-grip head, thread ensures secure fit• Excellent protection from dirt, moisture and corrosion• This product is widely used in hydraulic, pneumatic and general
engineering industries• Resistance to weather: the material degrades when exposed to direct
sunlight
THOMAPLAST® IV - 2015 75
Closure Elements - Plastics Plugs
Technical specification• Material: LDPE (low density polyethylene, soft)• Colour: red• Temperature range: -30 to +60 °C, for a short time +80 °C
Item For thread D H h Unit Price mm mm mm piece EURO
314618 G 1/8“ 16.4 10.5 4.2 25 32.00314619 G 1/8“ 16.4 10.5 4.2 50 54.00314620 G 1/4“ 18.8 12.8 6.5 25 34.00314621 G 1/4“ 18.8 12.8 6.5 50 56.00314622 G 3/8“ 22.9 12 5.5 25 36.00314623 G 3/8“ 22.9 12 5.5 50 60.00314624 G 1/2“ 28 17.3 10.3 25 52.00314625 G 1/2“ 28 17.3 10.3 50 88.00314626 G 5/8“ 31.3 18.4 13.9 25 58.00314627 G 5/8“ 31.3 18.4 13.9 50 98.00314628 G 3/4“ 32.3 17 11 10 24.00314629 G 3/4“ 32.3 17 11 25 54.00314630 G 7/8“ 38 18.1 13.5 10 32.00314631 G 7/8“ 38 18.1 13.5 25 66.00314632 G 1“ 39.8 16.9 10.8 10 38.00314633 G 1“ 39.8 16.9 10.8 25 80.00314634 G 1 1/4“ 49.9 20.9 15 5 38.00314635 G 1 1/4“ 49.9 20.9 15 15 96.00314636 G 1 1/2“ 55.2 16.9 10.8 5 40.00314637 G 1 1/2“ 55.2 16.9 10.8 15 102.00314638 G 2“ 73.7 17.5 10.7 5 46.00314639 G 2“ 73.7 17.5 10.7 15 116.00314640 G 3“ 105 16.5 11.3 5 66.00314641 G 3“ 105 16.5 11.3 15 166.00338207 M8 x 1 12.3 14.3 9.5 10 44.00338208 M8 x 1 12.3 14.3 9.5 25 94.00338209 M10 x 1 15.3 14.6 10.4 25 32.00338210 M10 x 1 15.3 14.6 10.4 50 54.00338211 M12 x 1 18.5 16.7 10.7 25 52.00338212 M12 x 1 18.5 16.7 10.7 50 92.003382131 M12 x 1.5 16.7 16.3 8.7 25 60.003382141 M12 x 1.5 16.7 16.3 8.7 50 104.003382151 M14 x 1.5 18.5 17.2 9.5 25 64.003382161 M14 x 1.5 18.5 17.2 9.5 50 112.00338217 M16 x 1.5 22 17.2 12.5 25 64.00338218 M16 x 1.5 22 17.2 12.5 50 112.00338219 M18 x 1.5 23.5 18.3 13.5 25 66.00338220 M18 x 1.5 23.5 18.3 13.5 50 114.00338221 M20 x 1.5 26.3 18.2 14 25 66.00338222 M20 x 1.5 26.3 18.2 14 50 114.00338223 M22 x 1.5 28.2 18.3 13.7 25 66.00338224 M22 x 1.5 28.2 18.3 13.7 50 114.00
Item For thread D H h Unit Price mm mm mm piece EURO
338225 M24 x 1.5 31.3 18.5 13.8 25 66.00338226 M24 x 1.5 31.3 18.5 13.8 50 114.00338227 M26 x 1.5 32.7 18.7 13.8 25 72.00338228 M26 x 1.5 32.7 18.7 13.8 50 124.00
1 with hexagonal head
THOMAPLAST®-Threaded Plug made of LDPE
Technical specification• Material: LDPE (low density polyethylene, soft)• Colour: red
Item For thread D H h Unit Price mm mm mm piece EURO
315154 M14 x 1.5 21.5 12.5 8 25 56.00315155 M14 x 1.5 21.5 12.5 8 50 96.00315156 M16 x 1.5 23.6 12.5 8 25 56.00315157 M16 x 1.5 23.6 12.5 8 50 96.00315158 M20 x 1.5 29.5 13 8 25 56.00315159 M20 x 1.5 29.5 13 8 50 96.00315160 M30 x 2 39.9 14.6 9.8 10 36.00315161 M30 x 2 39.9 14.6 9.8 25 78.00315162 M36 x 2 45.6 21.5 10.5 5 32.00315163 M36 x 2 45.6 21.5 10.5 15 80.00315164 M42 x 2 64.7 21.2 15.5 5 38.00315165 M42 x 2 64.7 21.2 15.5 15 96.00315166 M45 x 2 57.8 18.5 12.7 5 42.00315167 M45 x 2 57.8 18.5 12.7 15 106.00315168 M52 x 2 65.9 21.3 15.4 5 54.00315169 M52 x 2 65.9 21.3 15.4 15 138.00315170 G 1/4“ 20.5 9.2 6 25 32.00315171 G 1/4“ 20.5 9.2 6 50 56.00315172 G 3/8“ 24.1 9.6 6.2 25 32.00315173 G 3/8“ 24.1 9.6 6.2 50 56.00315174 G 1/2“ 30.4 9.2 6.1 25 56.00315175 G 1/2“ 30.4 9.2 6.1 50 98.00315176 G 5/8“ 30.2 9.2 6 25 56.00315177 G 5/8“ 30.2 9.2 6 50 98.00315178 G 3/4“ 34 9.1 6.1 25 56.00315179 G 3/4“ 34 9.1 6.1 50 98.00315180 G 3/4“ 33.2 12.5 6.8 25 56.00315181 G 3/4“ 33.2 12.5 6.8 50 98.00315182 G 1“ 40.2 9 5.7 10 34.00315183 G 1“ 40.2 9 5.7 25 72.00315184 G 1 1/4“ 49.5 18.7 12.9 5 34.00315185 G 1 1/4“ 49.5 18.7 12.9 15 86.00
76 THOMAPLAST® IV - 2015
Gaskets O-Rings
Gaskets
THOMAPLAST®-O-RingsThese O-Ring materials are specially developed for use in the food processing, pharmaceutical, petrochemical and chemical industries, as well as in technological processes
•Design:O-Rings are vulcanised in moulds•Methodofoperation:O-Rings are double-acting sealing elements. The initial squeeze acting in a radial or axial direction due to the installation
gives the O-Ring its initial sealing capability. These forces are superimposed by the system pressure to create the total sealing force which increases with increasing system pressure. Under pressure, the O-Ring behaves in a similar way to a fluid with high surface tension. The pressure is transmit-ted uniformly to all directions (see Figure Sealing forces).
•Comparedwithothersealingelements,theO-Ringhasawiderangeofadvantages:Inexpensive, allows low cost solutions; simple, one-piece groove design reduces hardware and design costs; compact design allows smaller hardware; easy, foolproof installation reduces risk; applicable to a wide range of sealing problems, static, dynamic, single or double acting; wide compound choice for compatibility with most fluids
•Mostcommonapplications:Sealing of static machine parts against liquid or gaseous media; as a radial static seal, e.g. for bushings, covers, pipes, cylinders; as an axial static seal, e.g. for flanges, plates, caps; as a dynamic sealing element at axial, rotating and oscillating movements
•Branch-specificsealingsolutions: Approvals and conformities in the food processing industry: ADI free, FDA, 3-A; Sanitary Standards; phar-maceutical industry: ADI free, USP Class VI
•Petrochemicalindustry: ex. decompression•Chemistry: permeation density and chemical stability•Dimensions: Inched ARP 001 - 932; Metric ID 3 - 193 mm; Cord thickness 1 - 8 mm•Manufacturing:According to the latest standards, with an optimal tool park, for quick and flexible handling, the traceability of materials is guaran-
teed, all parts go through a quality check before packaging•Usual application areas for elastomers regarding temperature and polarity of the used media•Approvals and certificates in the food, pharmaceutical and drinking water industries (see list of approvals)•Usual cleaning media for continuous plants in the food and pharmaceutical industries (see list of cleaning products)
THOMAPLAST® IV - 2015 77
Gaskets - EPDM O-Rings O-Rings
EPDM O-Rings
THOMAPLAST®-High-Performance EPDM O-Rings
Application area• Very well suited for use in:
Hot water and water steam (constant +180 °C, short-term +210 °C)Glycoles and brake fluids (on glycol base)Acids (hydrochloric and nitric acid)Bases (sodium hydroxide, potassium hydroxide)Ozone (+40 °C, 200 pphm) and oxygenCIP /SIP media for continuous plants in the food, beverage and phar-maceutical industries (see EPDM diagram and fat diagram)CIP (Cleaning in Place) = diluted acids or bases combined with cleaning additivesSIP (Sterilization in Place) = disinfectants, steam, oxidizing media (e.g. peracetic acid) and / or polar organic solvents (e.g. acetic acid)
• Well suited for use in animal fats at low temperatures• Should not be used in mineral fats, oils and waxes, fuels• Recommended lubricant for installation:
Silicone grease (e.g. Paraliq GTE 703 with NSF H1 approval) (see fat diagram)
• Explanation: This EPDM O-Ring (at low temperatures) is very well suited even at high fat content. Once the curve in the diagram is achieved, another suitable material type (FKM, VMQ or HNBR) should be chosen for the respective application.
General product specification• Food quality• Very good resistance to weather, aging and light• Good cold and thermal resistance• Good elastic behaviour• Good elongation at break and tearing strength• Very good abrasion resistance• Very good resistance to polar and oxidative media
General technical specification• Material: EPDM (ethylene-propylene-diene rubber)• Color: black• Crosslinking: peroxidic• Shore hardness A: 75° ±5 (test plate) (DIN 53505)• IRHD: 70 +5/-8 (o-ring) (DIN ISO 48 M)• Density: 1.09 g/cm3 (DIN EN ISO 1183)• Rebound elasticity: 46 % (DIN 53512)• Modulus at 100% elongation: 9.8 N/mm2 (DIN 53504)• Tensile strength: 16.2 N/mm2 (DIN 53504)• Elongation at break: 165 % (DIN 53504)• Tear propagation resistance: 11.5 N/mm2 (DIN 53515)• Compression set:
10 % at +100 °C / 24 h / 25 %15 % at +150 °C / 24 h / 25 %24 % at +150 °C / 70 h / 25 % (DIN ISO 815)
• Temperature range: -40 to +150 °C in air; -40 to +180 °C in water and steam
• Sterilization temperature: +121 °C (perishable foods and pharmacy)• Cleaning temperature: +82 °C (perishable foods)• Regulations:
For the food processing industry: conforming to FDA (21 CFR 177.2600)Free from animal derived ingredients (ADI free)For perishable foods: 3-A Sanitary Standards Class IIFor the pharmacy: USP Plastic Class VI up to +121 °CFor the drinking water industry: USA (NSF 61); GB (WRAS); Austria (ÖVGW); France (ACS); Germany (DVGW) KTW, W 270, W 534
• Should not be used in: mineral fats, oils and waxes, fuels• Recommended lubricant for installation: silicone grease
Product specification• Very good resistance to weather and aging• Good cold and thermal resistance• Good elastic behaviour• Good elongation at break and tearing strength• Very good abrasion resistance• Very good resistance to polar media
Technical specification• Material: EPDM (ethylene-propylene-diene rubber)• Color: black• Crosslinking: sulphur cross-linked• Shore hardness A: 70° ±5 (test plate) (DIN 53505)• Temperature range: -20 to +120 °C• Tensile strength: 10.5 N/mm2 (DIN 53504)• Elongation at break: 200 % (DIN 53504)• Tear propagation resistance: 45 N/mm2 (DIN 53515)• Compression set: 23 % at +100 °C / 24 h / 25 % (DIN ISO 815)
Application area• Very well suited for use in: Almost all chemicals, polar media such
as steam, concentrated acids, alkalis and organic solvents, oxidizing media (e.g. peracetic acid), mineral oils, fuels, vegetable and animal oils, silicones
• Should not be used: When the application requires the O-Ring to have a tighter sealing capability than that of the core through the thermoplastic shell
Product specification• Universal chemical resistance (comparable to PTFE)• Large temperature operating ranges• Well suited to food processing, pharmaceutical and medical applications• Low permeability• Low coefficient of friction prevents stick-slip-effect• Very good resistance to weather and aging• Very good abrasion resistance
• Crosslinking: peroxidic• Shore hardness A: 75° ±5 (test plate) (DIN 53505)• Temperature range: -20 to +200 °C• Density: 1.87 g/cm3
• Tensile strength: 20.5 N/mm2
• Elongation at break: 185 %• Sterilization temperature: +149 °C (for perishable foods);
+121 °C (for pharmacy)• Cleaning temperature: +82 °C (for perishable foods)• Regulations:
For the food processing industry: conforming to FDA (CFR 21 §177.2600), free from animal derived ingredients (ADI free)For perishable foods: 3-A® Sanitary Standards Class IIFor the pharmacy: USP Plastic Class VI at +121 °C
Application area• Very well suited for use in: Almost all chemicals, polar media such
as steam, concentrated acids, alkalis and organic solvents, oxidizing media (e.g. peracetic acid), mineral oils, fuels, vegetable and animal oils, silicones
• Should not be used: When the application requires the O-Ring to have a tighter sealing capability than that of the core through the thermoplastic shell
Product specification• Universal chemical resistance (comparable to PTFE)• Large temperature operating ranges• Well suited to food processing, pharmaceutical and medical applications• Low permeability• Low coefficient of friction prevents stick-slip-effect• Very good resistance to weather and aging• Very good abrasion resistance
• Crosslinking: peroxidic• Shore hardness A: 70° ±5 (test plate)• Temperature range: -60 to +200 °C• Density: approx. 1.35 g/cm3
• Tensile strength: min. 700 psi• Tear propagation resistance: min. 40 ppi• Elongation at break: >100 %• Sterilization temperature: +149 °C (for perishable foods);
+121 °C (for pharmacy)• Cleaning temperature: +82 °C (for perishable foods)• Regulations:
For the food processing industry: conforming to FDA (CFR 21 §177.2600), free from animal derived ingredients (ADI free)For perishable foods: 3-A® Sanitary Standards Class IIFor the pharmacy: USP Plastic Class VI at +121 °C
static and dynamic applications, applications involving constant temperature changes, all fats, mineral oils and waxes, fuels, water and water steam, concentrated acids (e.g. nitric acid 60%), amines (e.g. ethylenediamine), organic acids (e.g. acetic acid), ketones (e.g. methyl ethyl ketone), bases (e.g. caustic soda, potassium hydroxide), organic solvents (e.g. methanol), aromatic and chlorinated hydrocarbons
General product specification• Extremely resistant to a variety of chemicals from different reactive,
functional groups (comparable to PTFE)• FFKM offers the highest degree of fluorination among elastomers• High bond energy between carbon and fluorine atoms• No cold flow compared to PTFE• Highest temperature and media resistance combined with rubber-
elastic properties• FFKM is suitable for use in polar and non-polar media, even in higher
concentrations and at higher temperatures• Sealing solution for applications related to safety• Highly pure, proven material
Product specification• This material is suitable for the food and pharmaceutical industries
due to its approvals
Technical specification• Material: FFKM (perfluoroelastomer)• Color: black• Shore hardness A: 75° ±5 (test plate) (DIN 53505)• Temperature range: -10 to +230 °C, for a short time +260 °C• Density: 1.91 ±0.03 g/cm3 (DIN EN ISO 1183)• Modulus at 100% elongation: 9.7 N/mm2 (DIN 53504 S2)• Tensile strength: 16.8 N/mm2 (DIN 53504 S2)• Elongation at break: 161 % (DIN 53504)• Compression set: 20 % at +200 °C / 70 h / 25 % (DIN ISO 815 l)• Cold guide value: -1 °C (DIN 53765 DSC)• Regulations:
For the food processing industry: conforming to FDA (CFR 21 §177.2600), free from animal derived ingredients (ADI free)
Product specification• This material is suitable for the food and pharmaceutical industries
due to its approvals
Technical specification• Material: FFKM (perfluoroelastomer)• Color: black• Shore hardness A: 75° ±5 (test plate) (DIN 53505)• Temperature range: -10 to +230 °C, for a short time +260 °C• Density: 1.91 ±0.03 g/cm3 (DIN EN ISO 1183)• Modulus at 100% elongation: 9.7 N/mm2 (DIN 53504 S2)• Tensile strength: 16.8 N/mm2 (DIN 53504 S2)• Elongation at break: 161 % (DIN 53504)• Compression set: 20 % at +200 °C / 70 h / 25 % (DIN ISO 815 l)• Cold guide value: -1 °C (DIN 53765 DSC)• Regulations:
For the food processing industry: conforming to FDA (CFR 21 §177.2600), free from animal derived ingredients (ADI free)
Technical specification• Material: FFKM (perfluoroelastomer)• Crosslinking: peroxidic• Color: black• Shore hardness A: 75° ±5 (test plate) (DIN 53505)• Temperature range: -10 to +260 °C, for a short time +300 °C• Density: 1.95 g/cm3 (DIN EN ISO 1183)• Modulus at 100% elongation: 8.9 N/mm2 (DIN 53504)• Tensile strength: 16.8 N/mm2 (DIN 53504)• Elongation at break: 172 % (DIN 53504)• Compression set: 26 % at +200 °C / 70 h (DIN ISO 815 B)• Cold guide value: -1 °C (DIN 53765 DSC)
Product specification• Special cross-linking technology• This material is suitable for high-temperature applications with
aggressive media, e.g. in the chemical and petrochemical industries
Technical specification• Material: FFKM (perfluoroelastomer)• Crosslinking: peroxidic• Color: black• Shore hardness A: 75° ±5 (test plate) (DIN 53505)• Temperature range: -15 to +325 °C• Density: 1.94 g/cm3 (DIN EN ISO 1183)• Tensile strength: 15.5 N/mm2 (DIN 53504)• Elongation at break: 124 % (DIN 53504)• Modulus at 100% elongation: 12.2 N/mm2 (DIN 53504)• Compression set:
at +200 °C / 70 h 57 %at +300 °C / 70 h 44 %at +200 °C / 70 h 54 % in waterat +200 °C / 70 h 52 % in steam (DIN 53517)
mineral oils, fats and waxes, motor oils and fuels, animal and vegeta-ble fats, aliphatic and aromatic hydrocarbons, amines, hydraulic fluids, essential oils, and in high-temperature applications
• Well suited for use in:CIP / SIP media for continuous plants in the food, beverage and pharmaceutical industriesCIP (Cleaning in Place) = diluted acids or bases combined with cleaning additivesSIP (Sterilization in Place) = disinfectants, steam, oxidizing media (e.g. hypochlorite) and / or polar organic solvents (e.g. acetic acid)
• Should not be used in concentrated acids (e.g. nitric or formic acid), concentrated oxidizing media (e.g. peracetic acid)
General product specification• Outstanding temperature resistance• Very good resistance to ozone, oxygen, aging, and weather• Excellent resistance in mineral oils and fats• Low permeability to gas• Very good resistance in nonpolar media• Shows significant swelling in polar solvents and ketones
General technical specification• Material: FPM (fluorinated rubber)• Color: red• Crosslinking: bisphenolic• Shore hardness A: 75° ±5 (test plate) (DIN 53505)• Temperature range: -15 to +200 °C• IRHD: 70 +5 / -8 (o-ring) (DIN ISO 48 M)• Tensile strength: 15.7 N/mm2 (DIN53504)• Elongation at break: 160 % (DIN 53504)• Volume resistivity: >109 Ohm• Surface resistance: >109 Ohm• Compression set: 15 % at +175 °C / 24 h / 25 %• Sterilization temperature: +149 °C (perishable foods);
+121 °C (pharmacy)• Cleaning temperature: +82 °C (perishable foods)• Regulations:
For the food processing industry: conforming to FDA (CFR 21 Part 77.2600)Free from animal derived ingredients (ADI free)For perishable foods: 3-A Sanitary Standards Class IIFor the pharmacy: USP Plastic Class VI at +121 °C
Application area• Very well suited for use in: mineral oils, fats and waxes, motor oils
and fuels, aliphatic and aromatic hydrocarbons, amines, hydraulic fluids, essential oils, and in high-temperature applications
• Should not be used in: concentrated acids (e.g. nitric or formic acid), concentrated oxidizing media (e.g. peracetic acid)
Product specification• Outstanding temperature resistance• Very good resistance to ozone, oxygen, aging, and weather• Excellent resistance in mineral oils and fats• Low permeability to gas• Very good resistance in nonpolar media• Shows significant swelling in polar solvents and ketones
Technical specification• Material: FPM (fluorinated rubber)• Color: black• Shore hardness A: 80° ±5 (test plate) (DIN 53505)• Temperature range: -15 to +200 °C• Density: 2.19 g/cm3 (DIN EN ISO 1183)• Modulus at 100% elongation: 9 N/mm2 (DIN 53504)• Tensile strength: 12.2 N/mm2 (DIN 53504)• Elongation at break: 180 % (DIN 53504)• Compression set: 8 % at +150 °C / 24 h (DIN ISO 815)
ThomaPLaST® I-VLaboratory plastics, semi-finished products,closure and fastening elements and gaskets
ThomaPoR®
Separation technology
ThomaDRIVE®
Drive technology
Examples of the extremely wide range of products are employed in virtually every sector of industry.
The spectrum extends from hoses and fluids technology through elastomers and semi-finished products, plastics and bonding technology to laboratories and filtration technology.
Request our complete programme free of charge and without obligation or visit our homepage at
www.rct-online.de
The prices in this handbook are valid for the currency area of the „European Union“ !
To provide you with the best possible information about the application areas of our products, we take great care to give you a detailed, precise and technically up-to-date description.However, please note, that we cannot be held liable for any errors. Any values given are recommendations only that have been tested under normal conditions.
We suggest, that you test the product under the appropriate conditions determined by your specific use of the application.
If you need any help, we will gladly share our experienceswith you to give you further assistance.