THIS IS YOUR PRESENTATION TITLE - Hitema...HITEMA is a specialist manufacturer of sustainable solutions for process cooling and industrial confort applications. With a long-standing

1680UNITS PER YEAR

WE PRODUCE

HITEMA is a specialist manufacturer of sustainable solutionsfor process cooling and industrial confort applications.

With a long-standing and well-deserved reputation forexcellence, we have a proud record of reliability and qualitysolutions.

Since its inception, 30 years ago, HITEMA has grown, sellingworldwide and becoming a leading specialist in temperatureequipments.

This growth will continue into the future as we continue toadapt, expand, and evolve in order to satisfy our customersneeds.We supply our range of high quality Standard Products aswell as tailor made versions upon Customer request.

For questions or requests, write us to the following email address [email protected] or visit our website: www.hitema.com

OUR HISTORY

mailto:[email protected]

http://www.hitema.com/

OUR NUMBERS

45

4

18.750

23Sqm of indoor space

Ranges of products

Countries throughout the World

Production Plants1680Units per year

OURAPPLICATIONS

Aerospace & Defence Machine Tools

Food & Beverage

Coating Machine

Agriculture & Farming

Plastic and Rubber

Data Center

Chemical & Pharmaceutical

Laser

Automotive

Wineries & Distilleries

Biogas

RENTAL SERVICE

AVAILABLE

OURINSTALLATIONS COUNTRY OF INSTALLATION: UKRAINE

MODEL: TFV.700NOMINAL COOLING CAPACITY: 718 kW

COUNTRY OF INSTALLATION: OVERSEAS COUNTRIES MODEL: EEF.1100 with freecooling and inverter screwcompressorsNOMINAL COOLING CAPACITY: 1132 kW

COUNTRY OF INSTALLATION: DUBAI MODEL: SBS.330NOMINAL COOLING CAPACITY: 1X320 kW

COUNTRY OF INSTALLATION: SPAINMODEL: ISV.910NOMINAL COOLING CAPACITY: 850 kW

HOW WE WORKWe strive to be a reference point for our customers from thevery earliest stages of the work. Thanks to our technicaldepartment, full of specific skills for each sector, we are ableto guarantee a top quality support also during Projectinception, development and design.

We supply Standard Equipments as well as fully customizedsolutions, upon customers requires.

We have a dynamic and structured production cycle withhigh production capacity, ready to handle high volumeorders.

Our customers are guaranteed uncompromising quality,dependable delivery, competitive pricing, along withunparralled customer service after sales.

DOWNLOAD OUR SELECTION SOFTWARE


http://www.hitema.com/standard-products/process-cooling-application



HITEMA CONFIGURATORHitema configurator is a very useful tool to customizethe selected unit according to the applicationrequirements. It produces precious documents to definethe exactly unit configuration with your final user.

Developed and constantly updated by Hitematechnicians, the configurator lists the standard and theavailable optional components for the specific modelselected.

There is the possibility to filter the components bycategory (electrical, hydraulically, etc) in order to simplifyand speed up the selection. Detailed options informationare included with also an envelope image that gives theunit operative temperature limits.

More than 100 options are available, you just have tofind what’s right for you!

To obtain the configurator, please register in our onlineselection software.




STANDARD PRODUCTS

OUR PRODUCTSCUSTOMIZED SOLUTIONSThanks to our technical department, full of specific skills foreach sector, we are able to guarantee a top quality supportduring the inception, development and design of each Project.

We supply fully customized solutions, upon customersrequires.

We supply our range of standard products designed for severaltypes of different applications in order to meet the differentrequests of our customers.Each unit is made of high quality raw materials.Our team takes care of every detail for a longer durability.We provide solutions designed for energy saving and reducedenvironmental impact.

OUR STRENGTHS

• HIGH AMBIENT TEMPERATURE AIR COOLED UNITS

• LOW PROCESS TEMPERATURE APPLICATIONS

• FREE COOLING

• HIGH TAILOR SUITED SOLUTIONS

• ECOLOGIC REFRIGERANTS WITH LOW GWP

• STRONG SELF-MADE FRAME

PROCESS COOLING APPLICATIONSENR, ENRF, CSE SERIES are aircooled liquid chillers, designed forindustrial use and for outdoor (ENR, ENRF) and indoor (CSE withcentrifugal fans) installations. These chillers are designed for applicationsthat require reliability, continuity of operation, high performances andreduced management costs.All the models are equipped with coaxial or shell and tube evaporator,water pump suitable to work with water-glycol mixture and storage tankto assure precise temperature control even in presence of process highlyvariable thermal loads.With the wide range of cooling capacity up to 440kW it is possible tosatisfy all Customer demands. The refrigerant used is R410A (R32 onrequest).Thanks to the coaxial and shell & tube evaporators technology it ispossible to ensure high performances and reliability of the units for allthe industrial applications.All the units are tested at the Hitema production site before theshipment to ensure the best performances, reliability and continuity ofoperation to the Customers.One of several advantages of the series ENR, ENRF and CSE is thefootprint unit dimensions: the series are designed to take up minimalfloor space which also reduces shipment costs.

STANDARD PRODUCTSCompressor: SCROLLRefrigerant: R410A/R32

MODEL : ENR/ENRF




AIR CONDITIONING APPLICATIONSCFT SERIES are aircooled liquid chillers, designed for air conditioning use andfor outdoor installation. These chillers are designed for applications thatrequire reliability, high performance and reduced management costs.With the wide range of cooling capacity up to 410kW it is possible to satisfyall Customer demands. The refrigerant used is R410A (R32 on request). Thechillers are provided with one (models 008÷100) or two (models 130÷480)refrigerant circuits with up to 2 compressors per circuit to ensure highefficiency also at partial loads.HFT SERIES are reversible air to water heat pump for applications up to 0 ° Cambient. With the wide range of heating capacity up to 350kW it is possibleto satisfy all Customer demands. The refrigerant used is R410A (R32 onrequest). The chillers are provided with one (models 008÷100) or two(models 130÷430) refrigerant circuits with up to 2 compressors per circuit toensure high efficiency also at partial loads.Both the models are equipped with brazed plate evaporator. On requestthey can all be equipped with water pump suitable to work with water-glycolmixture and storage tank to assure precise temperature control even in thepresence of highly variable thermal loads.The degree of electrical protection is IP54 for all the models. All the units aretested at the Hitema production site before the shipment to ensure to theCustomers the best performances and reliability.


MODEL : HFT




MULTI SCROLL APPLICATIONSSBS and SBSF SERIES are air-cooled liquid chillers, designed for industrialuse and for outdoor installation. These chillers are designed for applicationsthat require reliability, continuity of operation, high performance and reducedmanagement costs.All the models are equipped with brazed plate or shell and tube evaporator.On request all the models can be equipped with water pump suitable towork with water-glycol mixture and storage tank to assure precisetemperature control even in presence of process highly variable thermalloads.With the wide range of cooling capacity up to 1349kW it is possible to satisfyall Customer demands. The refrigerant used is R410A (R32 on request).The degree of electrical protection is IP54 for all the models.All the units are tested at the Hitema production site before the shipment toensure to the Customers the best performances, reliability and continuity ofoperation. It is recommended to install a suitable filter on the unit inlet waterside.


MODEL : SBS/SBSF




COOLING BIG EVOLUTION

EET, EEF, ISV and ISVF SERIES are aircooled liquid chillers, designed forindustrial use and for outdoor installation. These chillers are designed forapplications that require reliability, continuity of operation, highperformance and reduced management costs.All the models are equipped with shell and tube evaporator.With the wide range of cooling capacity up to 1498kW it is possible tosatisfy all Customer demands. EET and EEF series chillers are providedwith two refrigerant circuits with one screw compressor per circuit, eachable to work with partition steps 50%-75%-100% of load. ISV and ISVFseries chillers are provided with one VSD screw compressor per circuitthat ensure high efficiency also at partial load. The refrigerants used areR513A & R1234ze.The degree of electrical protection is IP54 for all the models.All the units are tested at the Hitema production site before the shipmentto ensure to the Customers the best performances, reliability andcontinuity of operation.It is recommended to install a suitable filter on the unit inlet water side.

STANDARD PRODUCTSCompressor: SCREWRefrigerant: R513A

MODEL : EET/EEF

MODEL : ISV/ISVF




COOLING BIG EVOLUTIONNOVA & NOVAF SERIES are aircooled liquid chillers, designed forindustrial use and for outdoor installation. These chillers are designed forapplications that require reliability, continuity of operation, highperformance and reduced management costs.All the models are equipped with shell and tube evaporator.✔️ Product Range: 229kW - 985kW✔️ Semi-hermetic screw compressors✔️ Low Noise Fans✔️ Individual compressor and condenser fan motor starters✔️ IP-54 control panel✔️ Exceptional part load & full load performance and ReliabilityThe degree of electrical protection is IP54 for all the models.The refrigerants used are R134a & R1234ze.All the units are tested at the Hitema production site before the shipmentto ensure to the Customers the best performances, reliability andcontinuity of operation.


MODEL : NOVA

MODEL : NOVAF




WATERCOOLED /CONDENSERLESSAPPLICATIONSENW/ENRC and EWB/CWB SERIES are watercooled/condenserlessliquid chillers, designed for industrial use and for outdoor installation.These chillers are designed for applications that require reliability,continuity of operation, high performance and reduced managementcosts.All ENW /ENRC series models are equipped with coaxial (models003÷100) or shell and tube (models 130÷480) evaporator and brazedplate (models 003÷055) or shell and tube (models 061÷100) condenser.All the models are equipped with water pump suitable to work withwater-glycol mixture and storage tank to assure precise temperaturecontrol even in presence of highly process variable thermal loads.All EWB/CWB series models are equipped with shell andtube evaporator and shell and tube condensers. Shell and tube ensuresreliable operation in particular with liquids containing impurities. Thesemodels can't be equipped with water pump or storage tank.The refrigerant used is R410A (R32 on request). (ENW / ENRC) orR513A (EWB / CWB).


MODEL : CWB MODEL : ENW

MODEL : ENRC





REVERSIBLE HEAT-PUMPSSBS-HP SERIES consists of a reversible air-cooled heat pump designed to guarantee highperformances also in case of low ambient temperature, down to -20°C.These units are designed for applications that require reliability, continuity of operation, highperformance, reduced management costs and carbon dioxide emissions.This series is composed by three basic models that can be hydraulically an electricallycomposed to satisfy all final user demands; this simplify maintenance/repair operations(performed only in the damaged module) and the already built installation can be increasedin capacity in case of energy demand modification. In the event of any malfunction, eachmodule can be easily isolated from the others, which can continue to operate while thefaulty module is repaired, in this manner costly production downtime can be avoided.The refrigerant used is R410A. Low noise version and super low noise version are availableto reduce noise emissions.


MODEL : SBS-HP

Compressor:SCROLLRefrigerant: R410A



REVERSIBLE HEAT-PUMPSHNR SERIES consists of a reversible air-cooled heat pump designed to ensure an highperformance also in case of low ambient temperature, down to -5°C.These units are designed for applications that require reliability, continuity of operation andguarantee minimum consumption and high energy savings. In particular these units aredesigned for wineries and breweries to meet every requirement of the vinification cycle.All the models are equipped with scroll compressors, from one to four compressors in oneor two refrigerant circuits, axial fans with electronic fan speed control, brazed platecondenser and coaxial evaporator. The refrigerant used is R410A.Offered in packaged solutions these Units cover all the user’s needs, from 34 to 100kW in asingle Unit.They can be fully customized upon customer request, with optional components such aswater pump, carbon or stainless-steel tank, electronic expansion valve, smart defrost, softstarter, antivibration and low noise version.The degree of electrical protection is IP54 for all the models. All the units are rigorouslytested the Hitema production site before the shipment to ensure to the Customers thebest performances and continuity of operation even in the most difficult work conditions.


MODEL : HNR.038

Compressor:SCROLLRefrigerant: R410A

DISCOVER OUR SOLUTIONS SPECIFICALLY DESIGNED FOR

WINE APPLICATION AND FOR BEER PROCESSING



PRP SERIESPRP SERIES are are aircooled liquid chillers using low GWP natural refrigerant.These units of are specifically designed for industrial applications that requirereliability, continuity of operation, high performance and reduced managementcosts. The unit are developed for open air installation according to EN378,different technical solutions have been adopted to increase the safety of the unitand reduce the refrigerant charge.With the wide range of cooling capacity up to 820kW it is possible to satisfy allCustomer demands. The degree of electrical protection is IP54 for all the models.All the units are tested at the Hitema production site before the shipment toensure to the Customers the best performances, reliability and continuity ofoperation. It is recommended to install a suitable filter on the unit inlet water side.

MODEL : PRP

Compressor: RECIPROCATING/SCREWRefrigerant: R290

Propane strengths:It is not subject to the limitation of F-Gas regulation

It is a pure gas, not a mixture; as a consequence of this it doesn’t present any of the glideproblems that have been found in other synthetic refrigerants

It offers a very wide range of working area: it can be used both in refrigeration and airconditioning

Its low density and its thermodynamic properties allow a reduction of the charge andrelatively low working pressures

High efficiency: this refrigerant proves to be more efficient than the other syntheticrefrigerants normally used




NAME OF THE UNIT: NOVAF.973

COUNTRY: Overseas Countries

COOLING CAPACITY: 1440 kW

REFRIGERANT: R134a

TYPE OF COMPRESSORS: Screw

DELIVERED IN: 6 weeks

DESCRIPTION OF THE SPECIAL UNITAir-cooled screw chillers with integrated free-cooling andintelligent adiabatic evaporative pre cooling system. Therefrigerant used is R134A. This Unit is designed for data centerapplication. HITEMA with its range of product solutions is able todevelop and design Units suitable for this particular application,with attention to the continuity of work of the Chillers, studyingsolutions to save energy costs.

SPECIAL PRODUCTS

NOVAF.973-F22/HE.NE.M1




NAME OF THE UNIT: SBS.1230

COUNTRY: Ukraine


REFRIGERANT: R410A

TYPE OF COMPRESSORS: Scroll


DESCRIPTION OF THE SPECIAL UNITAir-Cooled liquid chiller SBS.1230/F16 with 12 scrollcompressors, 4 refrigerant circuits, double shell and tubeevaporator.

SPECIAL PRODUCTS

12 Scroll Compressors, 4 Refrigerant Circuits




NAME OF THE UNIT: ENR.061

COUNTRY: NETHERLANDS

COOLING CAPACITY: 61,95 kW

REFRIGERANT: R410A

EVAPORATOR INLET/OUTLET FLUID TEMPERATURE;FLUID TYPE: +14,5°C/+8°C; 40% ethylene glycol

TYPE OF COMPRESSORS: Copeland Emerson Scroll


DESCRIPTION OF THE SPECIAL UNITAir cooled chiller designed for MRI (Magnetic resonance imaging)application. This chiller has been designed with double refrigerantcircuit, coaxial evaporator with stainless steel double tank, aircooled copper and stainless-steel condenser coil, EC fans andintegrated process and stand by pump. This Unit has beenspecifically designed for its installation in aggressiveatmospheres.

SPECIAL PRODUCTS


Unit designed for MRI - Magnetic resonance imaging




COUNTRY: UK


REFRIGERANT: R449A

EVAPORATOR INLET/OUTLET FLUID TEMPERATURE;FLUID TYPE: -28°C/-32°C; 57% ethylene glycol

TYPE OF COMPRESSORS: Piston compressors with IQmodule

DELIVERED IN: 5/6 weeks

DESCRIPTION OF THE SPECIAL UNITAir-cooled chiller designed for low temperature application, withR449A refrigerant. This chiller has been realized with tworefrigerant circuits, two pistons compressors double brazed plateevaporator and line for oil separator. The unit has been rigorouslytested at the Hitema plant.

SPECIAL PRODUCTS




NAME OF THE UNIT: LCT.010

COUNTRY: ITALY


REFRIGERANT: R410A

APPLICATION: LASER


DELIVERED IN: 1 week

DESCRIPTION OF THE SPECIAL UNITAir-cooled chiller designed to ensure continuity of operation whilemaintaining perfect temperature control. The new HITEMA ChillerSeries for Laser application consists in dual temperature and dualcontrol chillers. This Series has been developed with intelligenttemperature control, completed configuration, perfect protectionand alarm system. HITEMA is proud to design, develop and testnew intelligent solutions for your cooling needs.

SPECIAL PRODUCTS


HITEMA CHILLER FOR LASER APPLICATION



NAME OF THE UNIT: EET.580

COUNTRY: USA


REFRIGERANT: R407F

TYPE OF COMPRESSORS: Semi-hermetic screw compressor


DESCRIPTION OF THE SPECIAL UNITAircooled process liquid chiller for low temperature. Very detaileddesign: cooling oil section with oil separator and dedicated coils andfans, compressor with part winding start mode and three regulationsteps (50-75-100%), electronic expansion valve, economiser line,axial fans with inverter and special hydraulic gaskets. Chiller withWinter Start kit to ensure the startup of the unit also with lowambient temperature.

SPECIAL PRODUCTS

Inlet temperature: -23°COutlet temperature: -29°CProcess fluid: SYLTHERM XLT

Oil separators




NAME OF THE UNIT: HNR.038

COUNTRY: France

COOLING CAPACITY: 35 kWHEATING CAPACITY: 38 kW

REFRIGERANT: R410A



DESCRIPTION OF THE SPECIAL UNITReversible air-cooled heat pump, with scroll compressors, onerefrigerant circuit, axial fans with electronic fan speed control,brazed plate condenser and coaxial evaporator. The refrigerantused is R410A. This Unit is designed for wineries and breweries tomeet every requirement of the vinification cycle.

SPECIAL PRODUCTS


SPECIFICALLY DESIGNED FOR WINE APPLICATION AND FOR BEER PROCESSING

SPECIAL SUPPORT FOR LIFTING AND PROTECTION OF THE UNIT

AVAILABLE



NAME OF THE UNIT: EWB3.1900

COUNTRY: Ukraine


REFRIGERANT: R134a

TYPE OF COMPRESSORS: Inverter Driven Screw


DESCRIPTION OF THE SPECIAL UNITWater-Cooled liquid chiller EWB3.1900 with 3 frigorific circuits,inverter driven Bitzer screw compressors model CSVH37-240Y,special footprint dimensions 5000mm x 2200mm, chillerdemontable in 2 parts each of less of 4000kg for the liftingoperations.

SPECIAL PRODUCTS




NAME OF THE UNIT: GRAIN COOLER

COUNTRY: Germany


REFRIGERANT: R513A

TYPE OF COMPRESSORS: Digital Scroll


DESCRIPTION OF THE SPECIAL UNITThis unit has been specifically designed for the cooling of thegrain during the storage phase, to prevent the product from beingdamaged due to fermentation.

The special evaporating section of this Unit is composed by:Evaporating coil, condenser filter with differential pressure,transmitter, drop separator, heating battery, heating resistance,centrifugal fan with plenum with inverter, air outlet nozzle400mm, special frame, digital scroll compressor, solenoid 24V ac,solenoid bypass hot gas suitable for carrying out high number ofcycles.

SPECIAL PRODUCTS




NAME OF THE UNIT: ENR.008 – ATEX UNIT

COUNTRY: UK


REFRIGERANT: R134a

TYPE OF COMPRESSORS: Reciprocating Compressor


DESCRIPTION OF THE SPECIAL UNITFlameproof Chiller for ATEX Zone 2 specifically designedfor the water cooling of tank showers.These Units are avaibable also for ATEX Zone 1 onrequest.

SPECIAL PRODUCTS


AVAILABLE FOR Zone 1 AND Zone 2



NAME OF THE UNIT: CWB2.990

COUNTRY: Greece


REFRIGERANT: R134a



DESCRIPTION OF THE SPECIAL UNITThose units are provided of two refrigerant circuits with onepartial desuperheater (which provide water at 40°C) and one#economizer per circuit which assure a high #efficiency. Inverterdriven screw compressors allows a smooth regulation whichresults in a low and stable leaving water temperature (-6°C)suitable for this specific application.

SPECIAL PRODUCTS




NAME OF THE UNIT: ENRF.008

COUNTRY: France

COOLING CAPACITY: 3kW

REFRIGERANT: R134a

TYPE OF COMPRESSORS: Reciprocating


DESCRIPTION OF THE SPECIAL UNITFree-Cooling liquid chiller ENRF.008 for ELECTRIC CARRECHARGE STATION. Working range from -30 ° C up to 55 ° Cambient. Other feautures: hydraulic circuit in non-ferrous materialwith plate evaporator and pump, power supply 230V/1/50Hz.

SPECIAL PRODUCTS




NAME OF THE UNIT: ISV.910

COUNTRY: Spain

COOLING CAPACITY: 850 KW

REFRIGERANT: R134a



DESCRIPTION OF THE SPECIAL UNITAir-Cooled liquid chiller ISV.910 with double hydraulic circuit andsingle power supply. The two units work as 4 independent unitseach of them composed by one inverter driven screw compressorand individual shell and tube evaporator. Other features:harmonics filters, compressors sound enclosure, condensersmetallic protection grids.

SPECIAL PRODUCTS

Double hydraulic circuit




NAME OF THE UNIT: EEF.1210

COUNTRY: USA

COOLING CAPACITY: 1242 KW

REFRIGERANT: R134a

TYPE OF COMPRESSORS: Bitzer Screw


DESCRIPTION OF THE SPECIAL UNITFree-cooling chiller EEF.1210 with adiabatic system, inverterregulated fans, ASME evaporator, double electrical box, powersupply 460V/3ph/60Hz UL. Ambient temperature 100% free-cooling at -15,5°C; altitude of installation = 2500m

SPECIAL PRODUCTS




ECO-FRIENDLY REFRIGERANT : HFO 1234ZE GWP <7

Compressor: SEMI HERMETIC SINGLE SCREWRefrigerant: R1234ze

NAME OF THE UNIT: SBSF.145

COUNTRY: France

COOLING CAPACITY: 128kW

REFRIGERANT: R1234ze

TYPE OF COMPRESSORS: Screw


DESCRIPTION OF THE SPECIAL UNITFree-cooling chiller SBSF.145. The solution is completely tailordesigned with special evaporator, special condensers and only 1screw compressors to obtain a compact chiller to utilizerefrigerant R1234ze with the V shape condensers of SBSF series.

SPECIAL PRODUCTS


INTEGRATED FREE-COOLING




COUNTRY: UAE


REFRIGERANT: R134a



DESCRIPTION OF THE SPECIAL UNITAircooled liquid chiller ENR.200 designed for maximum ambienttemperature 55°C: IP55 electrical box with air/liquid cooler,oversized condenser coil, refrigerant R134a. Hydraulic circuit innon ferrous material with plate evaporators. Electronic expansionvalves

SPECIAL PRODUCTSAmbient Temperature : +50°C




NAME OF THE UNIT: ENR.003/SP

COUNTRY: UK

COOLING CAPACITY: 3,13 KW

REFRIGERANT: R134a

TYPE OF COMPRESSORS: Reciprocating


DESCRIPTION OF THE SPECIAL UNITAir Cooled liquid chiller ENR.003 for OEM customers. Workingrange from -10°C up to 55°C ambient. Hydraulic circuit innonferrous material with plate evaporator and pump, cut phasefan speed regulator, customized dimensions, support bracketsand eye bolts for lifting for installation at wall, double workingfrequency 50Hz/60Hz.

SPECIAL PRODUCTS




CHILLER TEST AREAHitema test every single chiller produced in the factory to ensure the best quality andrealibility for the Customer. Every unit must follow a stricly internal quality control. Ourprocedure allow us to verify the correct installation of all components, to comply withfunctional values declared and to check the respect of certification required (CE, ASME,CRN, UL, CSA).The main feature of our test area is the use of two generators that can work in parallel , oneof 650 kVA e one of 500 kVA that allows us to test unit of nominal capacity till 2MW.We can test chillers with electrical feed: 400V/3ph/50Hz, 400V/3ph/60Hz,460V/3ph/60Hz, 208V/3ph/60Hz, 230V/3ph/60Hz and 575V/3ph/60Hz.

Visa electrical generators: nominal size 500÷650kVA


During our test we measure:

•Degree of vacuum;•Refrigerant charge;•Functional parameters as : evaporation, condensation, subcooling,superheating, cooling capacity, pressure drops on evaporator;•Electrical absorptions and correct calibration of safety devices.

We also check the correct certification of all components.All our tests must always be endorsed by our engineers.

WE ARE APPROVED BY Tuv italia Srl, WITH N° 0948



OUR STRENGTHS


OUR MISSION• HIGH CUSTOMIZED TAILOR SUITED SOLUTIONS

• EXCELLENT RELIABILITY AND CONTROL CAPACITY

• GREAT RANGE OF PRODUCTS FOR HIGH/LOW AMBIENTTEMPERATURES AND/OR HIGH/LOW WATER MIXTURESTEMPERATURES

• OPTIMIZED FREECOLING SYSTEM TO ACHIEVE THE BESTEFFICIENCY AND ENERGY SAVINGS

• USE OF THE BEST STATE-OF-THE-ART TECHNOLOGIES

• CREATE SOLID RELATIONS WITH ALL OUR PARTNERS BASEDON A TRUSTWORTHY COLLABORATION.

• DEAL WITH EVERY SINGLE CHALLENGE WITH THE MENTALITYTHAT EVERYTHING CAN BE ACHIEVED WITH HARD WORK ANDDEDICATION AND THAT IMPOSSIBLE IS ONLY AN OPPORTUNITYFOR US

• CREATE ALWAYS UNITS THAT CAN GUARANTEE THE BESTPERFORMANCES, AN EXCELLENT QUALITY AND THAT CANSAFEGUARD OUR NATURE AND THE FUTURE OF OUR PLANET

OUR CERTIFICATIONS



Logo + contatti + sito

Hitema International Company Page

Maurizio BurbaManaging Director

[email protected]. Maurizio BurbaManaging Director

Any questions?

CONTACT [email protected]

HITEMA s.r.l. Via Mons. G. Babolin, N. 14 - 35024 Bovolenta Padova (Italy) – Phone : 0039.049.5386344

www.hitema.com

https://www.linkedin.com/company/hitemainternational/

https://www.linkedin.com/in/burba-maurizio-4a421688/



THIS IS YOUR PRESENTATION TITLE - Hitema...HITEMA is a specialist manufacturer of sustainable solutions for process cooling and industrial confort applications. With a long-standing

Documents