THE RIGHT MATERIAL MIX SPELLS A DECISIVE ADVANTAGE The lampholders presented in this chapter are designed for high-pressure discharge lamps, for which high ignition voltages and high starting currents are characteristic. High temperatures can also occur with higher lamp outputs. Vossloh-Schwabe therefore attaches great importance to ensuring casings, contacts and cables are made of high-grade materials. Owing to the high ignition voltages, these lampholders are also governed by stricter requirements regarding creepage and air clearance distances. When operating high-pressure discharge lamps with E27 and E40 Edison bases, care must be taken to ensure that the respective lampholders are approved for use with discharge lamps. Lampholders that are suitable in this respect are marked with "5 kV". Lampholders with E26 and E39 bases and UL-approved wiring can be found under www.unvlt.com. Lampholders for Discharge Lamps 64 THERMOPLASTICS AND PORCELAIN
19
Embed
THERMOPLASTICS ANDPORCELAIN · 2016. 5. 7. · Type: 12812 Ref. No.: 108373 With steel thread Ref. No.: 532606 E40 lampholders Only for lamps with base E40/E45 Casing: porcelain,
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
THE RIGHT MATERIAL MIXSPELLS A DECISIVE ADVANTAGEThe lampholders presented in this chapter are designed for high-pressuredischarge lamps, for which high ignition voltages and high startingcurrents are characteristic. High temperatures can also occur with higherlamp outputs.
Vossloh-Schwabe therefore attaches great importance to ensuringcasings, contacts and cables are made of high-grade materials.
Owing to the high ignition voltages, these lampholders are alsogoverned by stricter requirements regarding creepage and airclearance distances.
When operating high-pressure discharge lamps with E27 and E40 Edisonbases, care must be taken to ensure that the respective lampholders areapproved for use with discharge lamps. Lampholders that are suitable inthis respect are marked with "5 kV".
Lampholders with E26 and E39 bases and UL-approved wiring can befound under www.unvlt.com.
Lampholders for Discharge Lamps
64
THERMOPLASTICSAND PORCELAIN
E27 lampholders 66–68
E40 lampholders 69–70
G8.5 lampholders 71
GX8.5 lampholders, accessories 71
GU6.5 lampholders 72
PGJ5 lampholders 73
GX10 lampholders 74
GY9.5 lampholders 75
G12, GX12-1, PG12-1, PG12-2 lampholders 75–76
RX7s lampholders 77–80
Fc2 lampholders 80–81
K12x30s lampholders 82
K12s-7 support 82
Technical details for discharge lamps 83–123General technical details 366–474Glossary 375–377
2 Lampholders for Discharge Lamps
10
9
8
7
6
5
4
3
2
1
65
E27 LampholdersFor discharge lamps with base E27
E27 lampholders, for cover caps (see p. 310–312)Profiled shape, external thread 40x2.5 IEC 60399Nominal rating: 4/250/5 kVPush-in twin terminals: 0.5–2.5 mm²Fixing holes for screws M3Rear fixing holes for self-tapping screwsacc. to ISO 1481/7049-ST3.9-C/FWeight: 15/16.5 g, unit: 500 pcs.Type: 64719Ref. No.: 505721 PET GF, black, T210Ref. No.: 505720 LCP, black, T270
E27 lampholders, for cover caps (see p. 310–312)Profiled shape, plainNominal rating: 4/250/5 kVPush-in twin terminals: 0.5–2.5 mm²Fixing holes for screws M3Rear fixing holes for self-tapping screwsacc. to ISO 1481/7049-ST3.9-C/FWeight: 15 g, unit: 500 pcs.Type: 64770Ref. No.: 505389 PET GF, black, T210Ref. No.: 505014 LCP, black, T270
E27 lampholdersCasing: PPS, black, T230Nominal rating: 4/500/5 kVScrew terminals: 0.5–2.5 mm²Spring loaded central contactFixing holes for screws M4 and M5Weight: 35/35.4 g, unit: 250 pcs.Type: 62150Ref. No.: 108718Type: 62151 with lamp safety catchRef. No.: 108719
E40 lampholdersOnly for lamps with base E40/E45Casing: porcelain, white, T270Oblong holes for screws M5Weight: 206 g, unit: 50 pcs.Type: 12900/12901Ref. No.: 528252Ref. No.: 528958 with lamp safety catch
E40 lampholdersOnly for lamps with base E40/E45Casing: porcelain, white, T270Fixing bracket with slots for screws M5Weight: 217 g, unit: 50 pcs.Type: 12910/12911Ref. No.: 528253Ref. No.: 528254 with lamp safety catch
Lampholders for Discharge Lamps
70
G8.5 LampholdersFor discharge lamps with base G8.5
Nominal rating: 2/500/5 kVMultipoint contacts: CuNiZnFixing holes for screws M3
G8.5 lampholdersPush-in terminals for stranded conductorswith ferrule bare end of cores Ø 1.4–1.8 mmType: 33600 casing: LCP, black, T260Weight: 5 g, unit: 1000 pcs.Ref. No.: 502394Type: 33650 casing: ceramic, T300Weight: 12.6 g, unit: 150 pcs.Ref. No.: 554542
GX8.5 Lampholders, AccessoriesFor discharge lamps with base GX8.5
GX8.5 lampholdersCasing: LCP, cover material: LCP, T260Nominal rating: 2/500/5kVPush-in terminals for stranded conductorswith ferrule bare end of cores Ø 1.8 mmWeight: 11.9/12.6, unit: 50 pcs.Type: 34650/34651Ref. No.: 547807 fixing holes for screws M3Ref. No.: 547808 threaded bushes M3
Cover cap for GX8.5 lampholders type 346For luminaires of protection class IIMaterial: LCP, blackWeight: 5.4 g, unit: 50 pcs.Type: 97685Ref. No.: 532521
Lampholders for Discharge Lamps
71
10
9
8
7
6
5
4
3
2
1
GU6.5 LampholdersFor discharge lamps with base GU6.5
Suitable for luminaries of protection class IICasing: ceramic, cover: PPS, T250Nominal rating: 2/250/5 kVLeads: Cu nickel-plated, stranded conductors 0.75 mm²,
GU6.5 lampholderFixing holes for screws M3Identical mounting hole layout and lamp focusof the PGJ5 lampholder 34120 offer an effortlessinterchangeability of both lamp technologies.Weight: 15 g, unit: 100 pcs.Type: 34520Ref. No.: 539497
Lampholders for Discharge Lamps
72
PGJ5 LampholdersFor discharge lamps with base PGJ5
Nominal rating: 2/300/2.5 kVFixing holes for screws M3
PGJ5 lampholders with cover plateCasing: ceramic, cover plate: LCP, T270Leads: Cu nickel-pIated, stranded conductors
0.75 mm², PTFE-insulation, length: 250 mmWeight: 9.2 g, unit: 100 pcs.Type: 34105/34106Ref. No.: 534080 lateral lead exitRef. No.: 534081 central lead exit
PGJ5 lampholders with cover plateSuitable for luminaires protection class IICasing: ceramic, cover plate: LCP, T270Leads: Cu nickel-pIated, stranded conductors
0.75 mm², double PTFE-insulation, length: 250 mmWeight: 10.6 g, unit: 100 pcs.Type: 34110/34111Ref. No.: 534016 lateral lead exitRef. No.: 534017 central lead exit
PGJ5 lampholders with cover plateSuitable for luminaires protection class IICasing: ceramic, cover plate: mica, T270Leads: Cu nickel-pIated, stranded conductors
0.75 mm², double PTFE-insulation, length: 250 mmWeight: 10.8 g, unit: 100 pcs.Type: 34150/34151Ref. No.: 536428 lateral lead exitRef. No.: 536429 central lead exit
Lampholders for Discharge Lamps
73
10
9
8
7
6
5
4
3
2
1
GX10 LampholdersFor discharge lamps with base GX10
GX10 lampholder, for luminaires of protection class IICasing: PPS, black, T240, nominal rating: 2/250/5 kVPush-in twin terminals for stranded conductorswith ferrule bare end of cores max. Ø 1.8 mmFixing holes for screws M3Weight: 9 g, unit: 100 pcs.. Type: 31400Ref. No.: 509356
GX10 lampholder, for luminaires of protection class IICasing: steatite, cover plate: PPST240, nominal rating: 2/500/5 kVPush-in terminals for stranded conductorswith ferrule bare end of cores Ø 1.5–1.8 mmFor leads with outer diameter: max. 3 mmFixing holes for screws M3Weight: 14 g, unit: 100 pcs.Type: 31500Ref. No.: 536469
GX12-1 lampholderCasing: LCP, blackT250, nominal rating: 2/500/5 kVContacts: CrNiPush-in terminals for leads withferrule on bare end of core max. Ø 1.8 mmor for tinned lead ends: 0.5–1 mm²Fixing holes for screws M4Weight: 13.6 g, unit: 50 pcs.Type: 42100Ref. No.: 509214
PG12-1 lampholderCasing: PPS, black, T220Nominal rating: 4/500/5 kV, contacts: CrNiPush-in terminals for leads withferrule on bare end of core max. Ø 1.8 mmor for tinned lead ends: 0.5–1 mm²Fixing holes for screws M4Weight: 20.2 g, unit: 100 pcs.Type: 31981Ref. No.: 505030
PG12-1 lampholderFor cover caps (see p. 310–312)Casing: PPS, black, T220Nominal rating: 4/500/5 kV, contacts: CrNiPush-in terminals for leads withferrule on bare end of core max. Ø 1.8 mmor for tinned lead ends: 0.5–1 mm²Fixing holes for screws M3Weight: 23 g, unit: 100 pcs.Type: 31980Ref. No.: 505029
Lampholders for Discharge Lamps
76
33
17
3,2
47
,4
35
23,6
4,3ø
38ø
3,5
ø
5
31
15
16
47
,4
24
38
ø
41
30
Ø4,4
Ø35
10
17,3
30,1
RX7s LampholdersIf the central hole on the bracket is used for fixing ithas to be ensured by an additional support within theluminaire that the bracket cannot be deformed. If thelampholders are used for lamps with ignition voltagemax. 20 kV the luminaire manufacturer is responsiblefor sufficient creepage distances and clearances.
Remark on lampholders type323 and 343:The luminaire design must ensure protection fromelectric shock as well as sufficient creepagedistances and clearances from live parts on theback of lampholder.
Type 343:With doubled insulated leadssuitable for luminaires of protectionclass II
Si-insulation max. Ø 3.6 mm, length: 200 mmOblong holes for screws M4Central hole for screw M5Weight: 75.7 g, unit: 200 pcs.Type: 32336 contact distance: 132 mmRef. No.: 100931
Protection caps for RX7s lampholdersFor push-fit onto lampholders type 323Protection against electrical shockon the rear side of the lampholderLampholders with assembled protection capon requestWeight: 0.7/0.6 g, unit: 1000 pcs.Type: 97528Ref. No.: 507592 LCP, naturalRef. No.: 507593 PET, white
If the lampholders are used for lamps withignition voltage max. 20 kV the luminaire manu-facturer is responsible for sufficient creepagedistances and clearances.