ITE Entertainment lifts are the benchmark in Stage, Orchestra, and General Purpose Lifts. Platforms can be engineered in any shape, weight capacity, and stroke height depending on project requirements. ITE has been working in partnership with European Link lift manufacturer SERAPID since 2000 and has since installed lifts in every state of Australia. Components besides the Linklifts are engineered and sourced from within Australia. All manufacturing is undertaken by ITE in Melbourne. All lifts are engineered with safety at their core and include overtravel limits in addition to upper and lower limits, dual failsafe braking, slow start and stop, e-stop systems, dead man control, error reporting, and troubleshooting, safe edge integration to all shearing edges & interlocked balustrades where required. Systems can be controlled in a number of ways such as via a simple wall- mounted control station and hand pendant. For more information, please see the below link. ITE Stage & Orchestra Lifts
Theatre Stage Lift | I.T.E
Aug 04, 2022
The industry standard for stage, orchestra, and general
purpose lifts is ITE Entertainment lifts. Depending on the needs of the
project, platforms can be constructed with any shape, weight capacity, and
stroke height. Since 2000, ITE has collaborated with European Link lift
producer SERAPID to deploy lifts around the nation of Australia.
Welcome message from author
Stage lifts make it possible to transfer orchestras, equipment, and seating platforms quietly. The lifting methods are effective and dependable because they combine strength. Some of the most developed theatrical performances have used performing stage lifts.
Transcript
ITE Stage.pdfITE Entertainment lifts are the benchmark in Stage, Orchestra, and General Purpose Lifts. Platforms can be engineered in any shape, weight capacity, and stroke height depending on project requirements. ITE has been working in partnership with European Link lift manufacturer SERAPID since 2000 and has since installed lifts in every state of Australia. Components besides the Linklifts are engineered and sourced from within Australia. All manufacturing is undertaken by ITE in Melbourne. All lifts are engineered with safety at their core and include overtravel limits in addition to upper and lower limits, dual failsafe braking, slow start and stop, e-stop systems, dead man control, error reporting, and troubleshooting, safe edge integration to all shearing edges & interlocked balustrades where required. Systems can be controlled in a number of ways such as via a simple wall- mounted control station and hand pendant. For more information, please see the below link.
ITE Stage & Orchestra Lifts
0396460822
www.ite.net.au
[email protected]
https://ite.net.au/
ITE Stage & Orchestra Lifts
0396460822
www.ite.net.au
[email protected]
https://ite.net.au/
Related Documents
