The Versatile TRILO - The Grass Group · hopper. Built to Trilo’s exemplary high standard the machine has a working width of 1.5 meters, a capacity of 1.1 m3 and 28 HP is all the

The Versatile TRILO

VanmacAstronaut 40

NL - 3824 MJ AmersfoortTel.: (+31) (0)33 456 45 50Fax: (+31) (0)33 456 44 33

E-mail: [email protected]: www.trilo.com

The Versatile TRILO C15 The Trilo C15 is a 3 point linkage mounted, PTO driven, flail unit with collection hopper. Built to Trilo’s exemplary high standard the machine has a working width of 1.5 meters, a capacity of 1.1 m3 and 28 HP is all the required horsepower to run this machine! The Trilo C15 is very versatile and can be used for a range of applications for example cutting grass, verticutting, collecting leaves and litter in one pass on both flat and undulating areas. There are 18 wind paddles mounted on a dynamically balanced rotor which is built for intensive use that will blow the material into the hopper. The dust cover ensures that the operator is free from any dust when operating in dry conditions.

Verticut, flail and collect The Trilo C15 equipped with 3 mm thick verticut blades can remove a large amount of thatch while leaving the grass clean and striped afterwards in one pass. Regular verticutting allows water, oxygen and fertilizer to quickly get to the grasses root system rapidly improving its condition. The hard faced steel Y-shaped blades can be used with the verticut blades improving the finish still further. Both types of blades are reversible to double their life time and reduce the operating costs. Changing the wear resistant blades is easy to do because of the quick-change clips used. The C15 can also be fitted with twisted flail blades which give a really “fine grass” cut and once again the grass is striped afterwards. The collected material can be dumped easily with a single acting hydraulic valve from the operator’s seat. The Trilo C15 is equipped standard with a steel roller front and back and these are easily adjusted to set the depth and /or cutting height.

Features• Removes thatch build up• Allows increased aeration• More effective utilization of fertilizer• Increased water penetration• Earlier spring green up

Technical specifications C15• Weight 515 kg• Working width 1.50 m• Width 1.92 m• Length 1.60 m• Height 1.57 m• Number of blades 48 single blades• Number of windpaddles 18• Blade spacing 26 mm• Hopper 1.1 m³• Hp requirement 21 kW (28 HP) @ 540 RPM.• Three point linkage Cat I• Hydraulics 1 Single acting valve

Vanmac reserves the rights to change specifications or design without prior notice.Trilo CE Made in Holland by Vanmac B.V.