The Tracking Magnet Recessed - FLOS Architectural · The Tracking Magnet Recessed High-tech LED lighting system for interior architecture Description ... • Light Strip: LED 2.7W,
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
F L O S . U S A110 York StreetBrooklyn, NY 11201( 7 1 8 ) . 8 7 5 . 3 4 7 2
• All available accessories for the spot modules come with the product
• Fixture heads all rotate 360° and tilt 90° from nadir
• Listings: UL Listed, IP 20 dry rated only, Class 2
Construction• Luminaires and profiles are made of extruded
aluminum
• Profiles can be field cut
Electrical• 24V electrical system
• System is limited to a maximum power current of 4A and 100W to avoid overloads
• After every 96W make a new connection with a connection feed profile
• Wattage per linear foot is dependent upon quantity and type of light modules used, total max possible per linear foot is 34W
• EC to supply site cabling from driver to track location
• Specify one connection cable per driver
• On board dimmable
Recessed Profile• Trimless extruded aluminum housing to
be pendant mounted, surface mounted, or recessed in drywall ceilings and walls (5/8” thick), consult factory for other ceiling types including accoustic tile ceiling and wood
• Available in 39.4”, 59” and 78.7” lengths as well as corner elements for continuous runs.
• Easily cut to adjust length with a chopsaw.
• Profile will ship with styrofoam fill, styrofoam maintains stability of profile and keeps track free of dust and paint
PhotometricsFor current IES files please visit usa.flos.com
• Accent LED spot modules can be rapidly exchanged and repositioned without tools. Light elements are quick to position and connect automatically through the magic of magnets
• Built-in dimming knob dims fixture from 20-100%
• All available accessories ship with the product
Light Strip
F L O S . U S A110 York StreetBrooklyn, NY 11201( 7 1 8 ) . 8 7 5 . 3 4 7 2
Both profile types can be cut to different lengths in field.
Corners
Horizontal corners available for 90° turns in the same plane, inside corner to transition from wall to ceiling or from
wall to wall and external corners to transition from wall to wall surfaces.
Horizontal Corner Inside Corner Outside Corner
Ceiling Kits
For installation on ACT or wood ceiling.
Consult factory for other ceiling types.
Drivers
Fixed Ceiling Kits (2 units)
Adjustable Ceiling Kits (2 units)
LED Driver- 96W Optronic 24V
06.1548.90 06.1550.90 06.1551.9008.8866.14
08.8867.14
LED96W24V-Non-Dim
Profiles
The extruded aluminum housing creates a clean 1/2” slot that can be run up, around and across walls and ceilings. Vertical and horizontal corners complete the
system. The magnetic luminaries are simply installed by insertion. Linear tracks are available in two versions: power feed profiles for connecting to a driver, and
intermediate profiles. End caps and connection cables are included with each power feed profile. Internal foam for opening support should not be removed until
after installation.
The Tracking Magnet RecessedHigh-tech LED lighting system for interior architecture
End Caps
End caps come with feed profiles. These should only be
ordered separately if the installation is exclusively composed
of intermediate elements.
End Caps
08.8890.14
F L O S . U S A110 York StreetBrooklyn, NY 11201( 7 1 8 ) . 8 7 5 . 3 4 7 2