The tool room - 3M · The tool room A guide to equipping your gear with the right fall protection for tools.

The tool roomA guide to equipping your gear with the right fall protection for tools.

Preventing injury from dropped toolsTools dropped from a height pose a risk not only to workers and others directly below, but to anyone in the area. Through direct impact or deflection, a dropped tool or object can lead to a life-changing injury or even a fatality. By utilizing available fall protection—using anchors and connectors specifically designed to attach tools and objects to a worker or structure—the risk of these dropped object accidents can be greatly reduced.

To help you choose the right fall protection product for the tools and objects on your worksite, we have developed a convenient reference guide for your use.

To learn more about the complete line of 3MTM DBI-SALA® Fall Protection for Tools product line and how to use them, download our pocket reference guide.

Caulking GunsUp to 5 lbs. with pre-drilled holes.

ChiselsChisels up to 1 lb. and concrete chisels up to 5 lbs.

Clamps and GripsBar clamps, bridge clamps and C-clamps

Cutting Knives, Scissors and SnipsAviation snips, linoleum knives, end cutters, utility knives and scissors

DrillsElectric drills and magbase drills up to 80 lbs.

FilesFiles up to 1 or 2 lbs., with or without pre-drilled holes

GrindersRight angle grinders or similar tools up to 35 lbs.

HammersBall peen, beater, chipping, claw, sledge and soft face hammers

Handheld RadiosHandheld radios up to 2 lbs.

LevelsMagnetic levels of up to 2 and 5 lbs.

Pipe Cutter and Thread DrivesPipe cutters up to 2 lbs. and power drives of up to 35 and 80 lbs.

PliersChannellock, lineman, needlenose and side cutting pliers/snips

Putty KnivesPutty knives of up to 2 and 5 lbs.

RatchetsDrive ratchets up to 35 lbs.

Saws, Hacksaws and SawzallsCircular saws, bandsaws, electric Sawzalls and hacksaws

SeamersHand seamers up to 2 lbs.

ScrapersScrapers up to 2 lbs.

ScrewdriversScrewdrivers up to 1, 2 or 5 lbs., with or without pre-drilled holes

Sleever BarsSleever bars up to 35 lbs.

Spark Tool/Flint StrikerSpark tools for use by welders

SquaresCombination and contractor squares up to 2 and 5 lbs.

Tape MeasuresTape measures up to 2 lbs.

Wire BrushWire brushes up to 2 or 5 lbs., with or without pre-drilled holes

Wire StrippersWire strippers up to 1 or 2 lbs., without pre-drilled holes

Wrecking BarBars up to 35 lbs.

WrenchesAdjustable, pipe, impact, box, chain, combination, scaffold, slugging, spud and valve wrenches

http://multimedia.3m.com/mws/media/1348291O/3m-fall-protection-for-tools-pocket-reference-guide.pdf

Caulking GunsProducts used: 3M™ DBI-SALA® D-ring Cord—Tools up to 5 lbs. (2.3 kg)

Find Attachment Point products on our website

Back to top

A D-Ring Cord creates a simple, secure and reusable attachment point for tools with pre-drilled holes or closed handles weighing up to 5 lbs. (2.3 kg).

http://www.3m.com/3M/en_US/company-us/all-3m-products/~/All-3M-Products/Safety/Worker-Health-Safety/Personal-Protective-Equipment/Fall-Protection/Fall-Protection-For-Tools/?N=5002385+8709322+8711017+8711405+8720539+8720544+8735077+8745742+3294857497&rt=r3

Concrete Chisel, up to 2 lbs. Products used: 3M™ DBI-SALA® D-ring (0.5” X 2.25”) and Quick Wrap Tape II—Tools up to 2 lbs. (0.9 kg)

Chisel, up to 1 lb.Products used: 3M™ DBI-SALA® Quick Spin—Tools up to 1 lb. (0.5 kg)

Chisel, up to 2 lbs. Products used: 3M™ DBI-SALA® D-ring (0.5” X 2.25”) and Quick Wrap Tape II—Tools up to 2 lbs. (0.9 kg)

Concrete Chisel, up to 5 lbs. Products used: 3M™ DBI-SALA® D-ring (1” x 3.5”) and Quick Wrap Tape II—Tools up to 5 lbs. (2.3 kg)

Back to top

D-Rings plus Quick-Wrap Tape create an instant attachment point, with load ratings ranging from 2 lbs. (0.9 kg) up to 5 lbs. (2.3 kg) depending on model. Quick-Wrap Tape wraps around the D-Ring Attachment and conforms to the shape of the tool once it’s stretched.

A Quick Spin is a small, reusable tube-shaped sleeve that can be applied to common hand tools (such as screwdrivers) weighing up to 1 lb. (0.5 kg) to make them tether-ready.











Bar Clamp, up to 2 lbs. without pre-drilled holes Products used: 3M™ DBI-SALA® D-ring (0.5” x 2.25”) and Quick Wrap Tape II—Tools up to 2 lbs. (0.9 kg)

Quick-Wrap Tape wraps around the D-Ring Attachment and conforms to the shape of the tool once it’s stretched.

Bar Clamp, up to 5 lbs. with pre-drilled holesProducts used: 3M™ DBI-SALA® D-ring Cord—Tools up to 5 lbs. (2.3 kg)

A D-ring Cord can be fitted onto many Bar Clamps with pre-drilled holes. It is important that the Tool Cinch be fitted around a part of the tool where there is no risk of the attachment point slipping off.

Bar Clamp, Sliding, up to 35 lbs. Products used: 3M™ DBI-SALA® Tool Cinch Medium Duty - Single Wing, Quick Wrap Tape II—Tools up to 35 lbs. (15.9 kg)

Some Bar Clamps have pre-drilled holes that are compatible with Quick Rings. Quick Rings are an economical and simple attachment point solution for hand tools weighing up to 2 lbs. (0.9 kg).

Bar Clamp, up to 2 lbs. with pre-drilled holesProducts used: 3M™ DBI-SALA® Quick Ring—Tools up to 2 lbs. (0.9 kg)

Back to top

For heavier tools, consider using a Tool Cinch. Once applied, it creates a tether ready attachment point. Quick-Wrap Tape wraps around the stabilization wing of the Tool Cinch and conforms to the shape of the tool once it’s stretched.









Bridge Clamp, up to 5 lbs. Products used: 3M™ DBI-SALA® Tool Cinch Medium Duty - Dual Wing, Quick Wrap Tape II—Tools up to 5 lbs. (2.3 kg)


C-Clamp, up to 5 lbs. Products used: 3M™ DBI-SALA® Tool Cinch Medium Duty - Dual Wing, Quick Wrap Tape II—Tools up to 5 lbs. (2.3 kg)

Back to top






Aviation Snips, up to 2 lbs. Products used: 3M™ DBI-SALA® D-ring (0.5” X 2.25”) and Quick Wrap Tape II—Tools up to 2 lbs. (0.9 kg)


Linoleum Knife, up to 2 lbs., with pre-drilled holes Products used: 3M™ DBI-SALA® Quick Ring—Tools up to 2 lbs. (0.9 kg)

End Cutter Products used: 3M™ DBI-SALA® D-ring (0.5” X 2.25”) and Quick Wrap Tape II—Tools up to 2 lbs. (0.9 kg)

Linoleum Knife, up to 2 lbs., without pre-drilled holes Products used: 3M™ DBI-SALA® D-ring (0.5” X 2.25”) and Quick Wrap Tape II—Tools up to 2 lbs. (0.9 kg)

Quick Rings are an economical and simple attachment point solution for hand tools weighing up to 2 lbs. (0.9 kg).

Back to top











Retractable Knife/Utility Knife

Products used: 3M™ DBI-SALA® Quick Ring—Tools up to 2 lbs. (0.9 kg)

Scissors, up to 5 lbs. Products used: 3M™ DBI-SALA® D-ring Cord—Tools up to 5 lbs. (2.3 kg

Scissors, up to 2 lbs. Products used: 3M™ DBI-SALA® Quick Ring—Tools up to 2 lbs. (0.9 kg)



Back to top








Magbase Drill, up to 35 lbs. Products used: 3M™ DBI-SALA® Tool Cinch Medium Duty - Single Wing, Quick Wrap Tape II—Tools up to 35 lbs. (15.9 kg)

Magbase Drill, up to 80 lbs.Products used: 3M™ DBI-SALA® Tool Cinch Heavy Duty—Tools up to 80 lbs. (36.3 kg)

For heavier tools, consider using a Tool Cinch. Once applied, it creates a tether ready attachment point.

Electric Drill, up to 35 lbs. Products used: 3M™ DBI-SALA® Tool Cinch Medium Duty - Single Wing, Quick Wrap Tape II—Tools up to 35 lbs. (15.9 kg)

Back to top

For heavier tools, consider using a Tool Cinch. Once applied, it creates a tether ready attachment point. Quick-Wrap Tape wraps around the stabiliza-tion wing of the Tool Cinch and conforms to the shape of the tool once it’s stretched.








File, up to 2 lbs., without pre-drilled hole Products used: 3M™ DBI-SALA® D-ring (0.5” X 2.25”) and Quick Wrap Tape II—Tools up to 2 lbs. (0.9 kg)

File, up to 5 lbs., with pre-drilled holeProducts used: 3M™ DBI-SALA® D-ring Cord—Tools up to 5 lbs. (2.3 kg)

File up to 2 lbs., with pre-drilled holeProducts used: Quick Ring—Tools up to 2 lbs. (0.9kg)

File, up to 1 lb., without pre-drilled holeProducts used: Quick Spin—Tools up to 1 lb. (0.5kg)


File up to 2 lbs., with pre-drilled holeProducts used: 3M™ DBI-SALA® Quick Ring—Tools up to 2 lbs. (0.9 kg)

File, up to 1 lb., without pre-drilled holeProducts used: 3M™ DBI-SALA® Quick Spin—Tools up to 1 lb. (0.5 kg)

Back to top












Right Angle GrinderProducts used: Tool Cinch Medium Duty - Single Wing, Quick Wrap Tape—Tools up to 35 lbs. (15.9kg)


Right Angle Grinder Products used: 3M™ DBI-SALA® Tool Cinch Medium Duty - Single Wing, Quick Wrap Tape II—Tools up to 35 lbs. (15.9 kg)

Back to top



Ball Pain Hammer Products used: 3M™ DBI-SALA® D-ring (1” x 3.5”) and Quick Wrap Tape II—Tools up to 5 lbs. (2.3 kg)


Beater Hammer, up to 5 lbs. Products used: 3M™ DBI-SALA® D-ring (1” x 3.5”) and Quick Wrap Tape II—Tools up to 5 lbs. (2.3 kg)

Beater Hammer, up to 35 lbs. Products used: 3M™ DBI-SALA® Tool Cinch Medium Duty - Single Wing, Quick Wrap Tape—Tools up to 35 lbs. (15.9 kg)


Chipping Hammer, up to 5 lbs.Products used: 3M™ DBI-SALA® D-ring Cord—Tools up to 5 lbs. (2.3 kg)

Back to top

D-Rings plus Quick-Wrap Tape create an instant attachment point, with load ratings ranging from 2 lbs. (0.9 kg) up to 5 lbs. (2.3 kg) depending on model. Quick-Wrap Tape wraps around the D-Ring Attachment and conforms to the

shape of the tool once it’s stretched.










Chipping Hammer, up to 2 lbs.Products used: 3M™ DBI-SALA® Quick Ring—Tools up to 2 lbs. (0.9 kg)


Claw Hammer, up to 5 lbs., without pre-drilled hole Products used: 3M™ DBI-SALA® D-ring (1” x 3.5”) and Quick Wrap Tape II—Tools up to 5 lbs. (2.3 kg)

Quick-Wrap Tape wraps around the D-Ring Attachment and conforms to the shape of the tool once it’s stretched.

Claw Hammer, up to 5 lbs., with pre-drilled hole Products used: 3M™ DBI-SALA® D-ring Cord—Tools up to 5 lbs. (2.3 kg)


Claw Hammer, up to 2 lbs.Products used: 3M™ DBI-SALA® Quick Ring—Tools up to 2 lbs. (0.9 kg)


Back to top









Sledge Hammer Products used: 3M™ DBI-SALA® Tool Cinch Medium Duty - Dual Wing, Quick Wrap Tape II—Tools up to 35 lbs.

Soft Face Hammer Products used: 3M™ DBI-SALA® D-ring (1” x 3.5”) and Quick Wrap Tape II—Tools up to 5 lbs. (2.3 kg)

Back to top







Handheld Radio Products used: 3M™ DBI-SALA® Micro D-ring—Tools up to 2 lbs. when used with Clip2Loop Coil Tether

A Micro D-ring can be applied to most handheld radios. The radio can then be tethered using a Clip2Loop Coil Tether.

Back to top



Magnetic Level, up to 5 lbs.Products used: 3M™ DBI-SALA® D-ring Cord—Tools up to 5 lbs. (2.3 kg)

Magnetic Level, up to 2 lbs.Products used: 3M™ DBI-SALA® Quick Ring—Tools up to 2 lbs. (0.9 kg)


Back to top






Pipe Cutter, up to 5 lbs.Products used: 3M™ DBI-SALA® D-ring Cord—Tools up to 5 lbs. (2.3 kg)

Pipe Cutter, up to 2 lbs.Products used: 3M™ DBI-SALA® Quick Ring—Tools up to 2 lbs. (0.9 kg)


Power Drive / Pipe Thread Drive, up to 35 lbs.Products used: 3M™ DBI-SALA® Tool Cinch Medium Duty—Tools up to 35 lbs. (15.9 kg)

Power Drive / Pipe Thread Drive, up to 80 lbs.Products used: 3M™ DBI-SALA® Tool Cinch Heavy Duty—Tools up to 80 lbs. (36.3 kg)


Back to top











Channellock Pump PliersProducts used: 3M™ DBI-SALA® Quick Spin—Tools up to 1 lb. (0.5 kg)

Lineman Pliers, up to 2 lbs. Products used: 3M™ DBI-SALA® D-ring (0.5” X 2.25”) and Quick Wrap Tape II—Tools up to 2 lbs. (0.9 kg)


Lineman Pliers, up to 1 lb.Products used: 3M™ DBI-SALA® Quick Spin—Tools up to 1 lb. (0.5 kg)

Long Nose/Needlenose Pliers, up to 2 lbs. Products used: 3M™ DBI-SALA® D-ring (0.5” X 2.25”) and Quick Wrap Tape II—Tools up to 2 lbs. (0.9 kg)


Back to top











Long Nose/Needlenose Pliers, up to 1 lb.Products used: 3M™ DBI-SALA® Quick Spin—Tools up to 1 lb. (0.5 kg)

Side Cutting Pliers / Wire Snips, up to 2 lbs. Products used: 3M™ DBI-SALA® D-ring (0.5” X 2.25”) Non-Conductive and Quick Wrap Tape II—Tools up to 2 lbs.(0.9 kg)


Side Cutting Pliers / Wire Snips, up to 1 lb.Products used: 3M™ DBI-SALA® Quick Spin—Tools up to 1 lb. (0.5 kg)


Back to top








Putty Knife, up to 5 lbs.Products used: 3M™ DBI-SALA® D-ring Cord—Tools up to 5 lbs. (2.3 kg)

Putty Knife, up to 2 lbs.Products used: 3M™ DBI-SALA® Quick Ring—Tools up to 2 lbs. (0.9 kg)


Back to top






Ratchets Products used: 3M™ DBI-SALA® Tool Cinch Medium Duty - Dual Wing, Quick Wrap Tape II—Tools up to 35 lbs. (15.9 kg)

Back to top




Circular Saw Products used: 3M™ DBI-SALA® Tool Cinch Medium Duty - Single Wing, Quick Wrap Tape II—Tools up to 35 lbs. (15.9 kg)

Electric Bandsaw Products used: 3M™ DBI-SALA® Tool Cinch Medium Duty - Dual Wing, Quick Wrap Tape II—Tools up to 35 lbs. (15.9 kg)

The Dual Wing Tool Cinch should only be used with a Bandsaw if the two stabilization wings do not interfere with the trigger of the tool. Because this is not always possible, the Single Wing Tool Cinch is strongly recommended in many cases as it will not interfere with the trigger of the tool.

Electric Sawzall Products used: 3M™ DBI-SALA® Tool Cinch Medium Duty - Single Wing, Quick Wrap Tape II—Tools up to 35 lbs. (15.9 kg)


HacksawProducts used: 3M™ DBI-SALA® Quick Ring—Tools up to 2 lbs. (0.9 kg)

A Quick Ring can be fitted around the body of a Hacksaw so long as there is no risk of the ring slipping off the tool.

Back to top










Seamers Products used: 3M™ DBI-SALA® D-ring (0.5” X 2.25”) and Quick Wrap Tape II—Tools up to 2 lbs. (0.9 kg)

Back to top




Scrapers Products used: 3M™ DBI-SALA® D-ring (0.5” X 2.25”) and Quick Wrap Tape II—Tools up to 2 lbs. (0.9 kg)

Back to top




Screwdriver, up to 2 lbs. without pre-drilled hole Products used: 3M™ DBI-SALA® D-ring (0.5” X 2.25”) and Quick Wrap Tape II—Tools up to 2 lbs. (0.9 kg)

Screwdriver, up to 5 lbs. with pre-drilled holeProducts used: 3M™ DBI-SALA® D-ring Cord—Tools up to 5 lbs. (2.3 kg)

Screwdriver, up to 1 lb. without pre-drilled holeProducts used: 3M™ DBI-SALA® Quick Spin—Tools up to 1 lb. (0.5 kg)


Back to top









Sleever Bars Products used: 3M™ DBI-SALA® Tool Cinch Medium Duty - Dual Wing, Quick Wrap Tape II—Tools up to 35 lbs. (15.9 kg)

For heavier tools, consider using a Tool Cinch. Once applied, it creates a tether ready attachment point. Quick-Wrap Tape wraps around the stabi-lization wing of the Tool Cinch and conforms to the shape of the tool once it’s stretched.

Back to top



Spark Tool/Flint StrikerProducts used: 3M™ DBI-SALA® D-ring Cord—Tools up to 5 lbs. (2.3 kg)


Back to top

Spark Tool/Flint StrikerProducts used: 3M™ DBI-SALA® Quick Ring—Tools up to 2 lbs. (0.9 kg)






Combination Square, up to 5 lbs. Products used: 3M™ DBI-SALA® D-ring Cord—Tools up to 5 lbs. (2.3 kg)

Combination Square, up to 2 lbs.Products used: 3M™ DBI-SALA® Quick Ring—Tools up to 2 lbs. (0.9 kg)

Contractor Square, up to 5 lbs.Products used: 3M™ DBI-SALA® D-ring Cord—Tools up to 5 lbs. (2.3 kg)

Contractor Square, up to 2 lbs.Products used: 3M™ DBI-SALA® Quick Ring—Tools up to 2 lbs. (0.9 kg)


Back to top












Tape MeasuresProducts used: 3M™ DBI-SALA® Tape Measure Sleeve —Tools up to 2 lbs. (0.9 kg)

Back to top

A Tape Measure Sleeve, Retractor and Holster, which attaches to a tool belt and fits most tape measure sizes (Medium Tape Measure Sleeve fits most up to 25 ft., Large Tape Measure Sleeve fits most up to 35 ft.). Once secured, the tape measure does not need to be removed for any reason—it maintains all functionality while still in its retractable holster.



Wire Brush/Tooth brush, up to 2 lbs. without pre-drilled hole Products used: 3M™ DBI-SALA® D-ring (0.5” X 2.25”) and Quick Wrap Tape II—Tools up to 2 lbs. (0.9 kg)

Wire Brush/Tooth brush, up to 5 lbs. with pre-drilled holeProducts used: 3M™ DBI-SALA® D-ring Cord—Tools up to 5 lbs. (2.3 kg)

Wire Brush/Tooth brush, up to 2 lbs. with pre-drilled holeProducts used: 3M™ DBI-SALA® Quick Ring—Tools up to 2 lbs. (0.9 kg


Back to top









Wire Stripper, up to 2 lbs. without pre-drilled hole Products used: 3M™ DBI-SALA® D-ring (0.5” X 2.25”) and Quick Wrap Tape II—Tools up to 2 lbs. (0.9 kg)

Wire Stripper, up to 1 lb. without pre-drilled holeProducts used: 3M™ DBI-SALA® Quick Spin—Tools up to 1 lb. (0.5 kg)


Back to top






Wrecking Bar Products used: 3M™ DBI-SALA® Tool Cinch Medium Duty - Dual Wing, Quick Wrap Tape II—Tools up to 35 lbs. (15.9 kg)


Back to top



Adjustable Pipe Wrench, up to 5 lbs.Products used: 3M™ DBI-SALA® D-ring Cord—Tools up to 5 lbs. (2.3 kg)

Adjustable Pipe Wrench, up to 35 lbs. Products used: 3M™ DBI-SALA® Medium Duty Bungee Tether—Tools up to 35 lbs. (15.9 kg)

Adjustable Pipe Wrench up to 35 lbs. Products used: 3M™ DBI-SALA® Tool Cinch Medium Duty—Tools up to 35 lbs. (15.9 kg)


Tool Tethers or Lanyards generally feature some kind of carabiner hook, clip, snap hook or pass-through loop to secure one end to the tool’s attachment point, and the other end to an anchorage.

Adjustable Pipe Wrench, up to 15 lbs.Products used: 3M™ DBI-SALA® Bungee Tether—Tools up to 15 lbs. (6.8 kg)

Tool Tethers or Lanyards generally feature some kind of carabiner hook, clip, snap hook or pass-through loop to secure one end to the tool’s at-tachment point, and the other end to an anchorage.

Back to top










Adjustable Wrench, up to 15 lbs.Products used: 3M™ DBI-SALA® Bungee Tether—Tools up to 15 lbs. (6.8 kg)

Adjustable Wrench, up to 5 lbs.Products used: 3M™ DBI-SALA® D-ring Cord—Tools up to 5 lbs. (2.3 kg)

Adjustable Wrench, up to 35 lbs.Products used: 3M™ DBI-SALA® Tool Cinch Medium Duty—Tools up to 35 lbs. (15.9 kg)

Tool Tethers or Lanyards generally feature some kind of carabiner hook, clip, snap hook or pass-through loop to secure one end to the tool’s at-tachment point, and the other end to an anchorage.

Adjustable Wrench, up to 2 lbs.Products used: 3M™ DBI-SALA® Quick Ring—Tools up to 2 lbs. (0.9 kg)

Back to top












Box Wrench, fixed attachment Products used: 3M™ DBI-SALA® D-ring (0.5” X 2.25”) and Quick Wrap Tape II—Tools up to 2 lbs. (0.9 kg)

Box Wrench, rotating attachmentProducts used: 3M™ DBI-SALA® Quick Ring—Tools up to 2 lbs. (0.9 kg)

Chain Wrench Products used: 3M™ DBI-SALA® Tool Cinch Medium Duty - Dual Wing, Quick Wrap Tape II—Tools up to 35 lbs. (15.9 kg)

A Quick Ring can be fitted around a Box Wrench as long as there is no risk of the ring slipping off either end of the tool (multiple Quick Ring sizes are available). This is an ideal attachment point for Box Wrenches as it allows for the Quick Ring to rotate and move which helps prevent tangles, and stays out of the way of the user.

Air Impact Wrench Products used: 3M™ DBI-SALA® Tool Cinch Medium Duty - Single Wing, Quick Wrap Tape II—Tools up to 35 lbs. (15.9kg)

Back to top












Combination Wrench, up to 35 lbs. Products used: 3M™ DBI-SALA® Tool Cinch Medium Duty - Dual Wing, Quick Wrap Tape II—Tools up to 35 lbs. (15.9 kg)

Impact Wrench Products used: 3M™ DBI-SALA® Tool Cinch Medium Duty - Single Wing, Quick Wrap Tape II—Tools up to 35 lbs. (15.9 kg)

Scaffold Wrench, up to 2 lbs. without pre-drilled hole Products used: 3M™ DBI-SALA® D-ring (0.5” X 2.25”) and Quick Wrap Tape II—Tools up to 2 lbs. (0.9 kg)


For heavier tools, consider using a Tool Cinch. Once applied, it creates a tether ready attachment point. Quick-Wrap Tape wraps around the stabi-lization wing of the Tool Cinch and conforms to the shape of the tool once it’s stretched. (shown with bungee tether).

Combination Wrench, up to 2 lbs.Products used: 3M™ DBI-SALA® Quick Ring—Tools up to 2 lbs. (0.9 kg)

A Quick Ring can be fitted around a Combination Wrench as long as there is no risk of the ring slipping off either end of the tool (multiple Quick Ring sizes are available). This is an ideal attachment point for Combination Wrenches as it allows for the Quick Ring to rotate and move which helps prevent tangles, and stays out of the way of the user.

Back to top










Scaffold Wrench, up to 2 lbs. with pre-drilled holeProducts used: 3M™ DBI-SALA® Quick Ring—Tools up to 2 lbs. (0.9 kg)

Slugging Wrench, up to 35 lbs. Products used: 3M™ DBI-SALA® Tool Cinch Medium Duty - Dual Wing, Quick Wrap Tape II—Tools up to 35 lbs. (15.9 kg)

Slugging Wrench, up to 80 lbs.Products used: 3M™ DBI-SALA® Tool Cinch Heavy Duty—Tools up to 80 lbs. (36.3 kg)


Scaffold Wrench, up to 5 lbs. with pre-drilled holeProducts used: 3M™ DBI-SALA® D-ring Cord—Tools up to 5 lbs. (2.3 kg)

Back to top












Valve Wrench Products used: 3M™ DBI-SALA® D-ring (0.5” X 2.25”) and Quick Wrap Tape II—Tools up to 2 lbs. (0.9 kg)

Spud Wrench Products used: 3M™ DBI-SALA® D-ring (1” x 3.5”) and Quick Wrap Tape II—Tools up to 5 lbs. (2.3 kg)

When Installing a D-ring on a Spud Wrench, it’s important that the D-ring be facing towards the wrench-end of the tool so that the Spud Wrench can be holstered more easily in pouches such as the Utility Pouch.

Back to top






3M Fall ProtectionPersonal Safety Division3833 SALA WayRed Wing, MN 55066 USAPhone 800-328-6146Email [email protected] 3M.com/FallProtection

© 2017 3M Fall Protection June 2017

The tool room - 3M · The tool room A guide to equipping your gear with the right fall protection for tools.

Documents