voestalpine Sadef nv THE STANDARISED CARPORT www.voestalpine.com/sadef HEADQUARTERS: BELGIUM voestalpine Sadef nv Bruggesteenweg 200 B-8830 Gits T. +32 51/26 12 11 F. +32 51/26 13 01 [email protected]REPRESENTATIVE OFFICES: THE NETHERLANDS W. Witsenplein 4 2596 BK Den Haag, The Netherlands T. + 31 70 324 28 02 F. + 32 51 26 16 13 [email protected]FRANCE 2, Bd Albert 1er 94130 Nogent-s-Marne, France T. +33 1/43 24 60 11 F. +33 1/43 24 60 01 [email protected]GERMANY Franz-Tilgner-Straße 10 50354 Hürth, Germany T. + 49 22 33 20 11 48 F. + 49 22 33 20 28 85 [email protected]SECTION VIEWS All dimensions are in mm FOR OF MIDDLE LOADS FOR HEAVY LOADS
2
Embed
THE STANDARISED - Sadef · Pré-dimensionnement des fondations : Les informations ci -dessous donnent un pré dimensionnement préliminaire. Un ingénieur spécialisé doit dimensionner
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
FEATURES » Modular in length (Multiple) » For all type of panels » Landscape or portrait panel arrangement
MATERIAL » Foundation base: hot-dipped galvanized » Profiles: Pre galvanized (Z275) » Bolts: hot-dipped galvanized
OPTIONAL » Powder coating
SCOPE OF DELIVERY BY VOESTALPINE SADEF » Frame components and bolts » Assembly instruction
TO BE CARRIED OUT/PROVIDED BY CUSTOMER » Foundations and anchors » Steel deck + Module fixing » Gutter / down comer
BENEFITS » Easily accessible » Quick and easy mounting » Structural design according to Eurocode and its
corresponding national application document
FOR MIDDLE LOADS*To be used in following regions (terrain cat. II) and for a snow load up to Sk= 1.1 except for France Sk= 0.95 » Belgium: >200m AMSL » France: for wind zones 1,2 and 3 and snow zones up to C2 (below 500m) » Netherlands: wind zone 1,2 and 3 » Germany: for wind zones 1 and 2 and snow zone 1,2 and 3 (≤200m AMSL) » UK: entire country (except for Scotland >200m)
FOR HEAVY LOADS*To be used in following regions with heavy snow loads (up to Sk=2.90kN/m2) » Germany: for snow zone 2 (≤750m AMSL), 2a (≤650m AMSL), 3 (≤550m AMSL) » Austria: for snow zone 2* (≤1000m AMSL), 2 (≤800m AMSL), 3 (≤500m AMSL) » France: for snow zone A1 to D (<1250m AMSL), zone E (<800m AMSL)
*Values are indicative and to be checked on project basis
Below information is intended to provide an estimation for preliminary design purposes. A specialized engineer should make final design after further soil investigation. For very weak soil or very fine-grained sands, ask specialized advice.
FOR MIDDLE LOADSFoundation predesign based on: » Moderately good soil » Ø’ - 30° » q = 15 kN/m2 » Concrete C25/30
FOR HEAVY LOADS » A specialized engineer should make the design,
taking into consideration reaction forces delivered by voestalpine Sadef and results of soil investigation.
voestalpine Sadef is not responsible for the design and execution of the foundations. This is a concept design for information only prepared by Establis. A final foundation design will be needed per specific project and can be ordered to the engineering company, e.g. Establis: www.establis.com
TECHNICAL DETAILS APPLICABILITY BY COUNTRY
FOUNDATION PRE-DESIGN
All dimensions are in mmAll dimensions are in mm
FOUNDATION LENGTH L(m)
Flexpark type Middle loads
MONO 2,80
DOUBLE 3,50
MULTIPLE 5,00
DONNEES TECHNIQUES
www.sadef.com
Le contenu de ce document est confidentiel et est la propriété de voeslpine Sadef nv.
Toutes dimensions en mm page 5/6 Version: 6-WN
Pré-dimensionnement des fondations : Les informations ci-dessous donnent un pré-dimensionnement préliminaire. Un ingénieur spécialisé doit dimensionner correctement les fondations après une étude du sol. Pour les sols faibles ou sablonneux, faire appel à un spécialiste. Pour charge moyenne :
Etude des pré-fondations basée sur : Sol relativement correct ϕ' - 30° q = 15 kN/m2 Béton C25/30
Pour charges élevées :
Un ingénieur spécialisé doit dimensionner les fondations en prenant en compte
les descentes de charges fournies par voestalpine Sadef
et une étude du sol.
voestalpine Sadef ,n’est pas responsable pour le développement et l’exécution des fondations. Les données définies dans ce document sont à titre informatif. Une définition des fondations est à faire par un bureau d’études spécialisé.
Longueur de fondation L(m)
FLEXPARK TYPE Charge moyenne
MONO 2,80
DOUBLE 3,50
MULTIPLE 5,00
DONNEES TECHNIQUES
www.sadef.com
Le contenu de ce document est confidentiel et est la propriété de voeslpine Sadef nv.
Toutes dimensions en mm page 5/6 Version: 6-WN
Pré-dimensionnement des fondations : Les informations ci-dessous donnent un pré-dimensionnement préliminaire. Un ingénieur spécialisé doit dimensionner correctement les fondations après une étude du sol. Pour les sols faibles ou sablonneux, faire appel à un spécialiste. Pour charge moyenne :
Etude des pré-fondations basée sur : Sol relativement correct ϕ' - 30° q = 15 kN/m2 Béton C25/30
Pour charges élevées :
Un ingénieur spécialisé doit dimensionner les fondations en prenant en compte
les descentes de charges fournies par voestalpine Sadef
et une étude du sol.
voestalpine Sadef ,n’est pas responsable pour le développement et l’exécution des fondations. Les données définies dans ce document sont à titre informatif. Une définition des fondations est à faire par un bureau d’études spécialisé.