CIrClE mAGIC Plus The quick & easy way to put the finishing touch on your CIrClE mAGIC project #683 For use with Circle Magic #673
Welcome message from author
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
CIrClE mAGICPlu
s
6 80 7 0 1 5 0 0 6 8 3
Since every Circle Magic project is different, we can notprovide yardage requirements for this product.
Copyright 2006 Peggy A. Stell. All rights reserved. This pattern is�
for personal projects or gifts and may not be duplicated fordistribution, commercial or otherwise, without the express permissionof Brandy’s Quilt Products, Inc. Dba Brandy’s.
Disclaimer: This information is given in good faith; but Brandy’scannot be responsible for results obtained since use of the pattern andmaterials are beyond our control.
The quick & easy way to put the finishing
touch on your projectCIrClE mAGIC
The quick & easy way to putthe finishing touch on your
CIrClE mAGIC project
Brandy’s www.brandysquiltpatterns.com1443 Hwy 84 870.342.5005 VoiceAmity AR 71921 870.342.5030 FAX
Brandy'sA NEW WAY TO MAKE OLD TREASURES
#683
For use with Circle Magic #673
1. Layer two 3-1/2” wide strips from same fabric, right sides together, and cut into crescent shapes using the template.
2. Repeat step 1 until all 8 crescent sets have been cut from both colors of fabric.
3. Place 2 crescents right sides together and sew 1/4” from the edge.
4. Place the crescent template on the sewn crescent and mark the 2 dots on the fabric.
6. Trim around the outside 1/8” from the seam.
5. Cut dot to dot making sure to cut through only one layer of fabric.
7. Turn right side out and iron.
8. Repeat steps 1 through 5 until all crescents are done.
8 each
8 each
CrescentTemplate
Brand
y’s
ww
w.b
ran
dys
qu
iltp
atte
rns.
com
#39
6 3
”x
18”
870-
342
-50
05
1. Place a ruler on a crescent as shown (same side as the turning slit) and draw a line across the crescent.
2. Repeat step 1 for the remaining crescents.
Attaching the outside crescents
Original idea for crescents by Robbi Leeper, owner, Qwiltz in Bowdon, GA.
Making the outside crescents
Attaching the outside crescents (continued)
3.��Pin�crescents�to�the�back�of�the�quilt�on�the�outside�edges�so�that�light�crescents�are�on�dark�circles�and�dark�crescents�are�on�light�circles.��Be�sure�to�place�the�crescents�so�that�the�turning�slit�is�positioned�away�from�the�back�of�the�quilt�as�shown.
4.��Sew�along�the�drawn�line.
5.��From�the�back�of�the�quilt,�press�the�crescent�to�the�outside.
6.��Turn�the�quilt�face�up�and�press�the�outside�edge�of�the�circle�towards�the�center�of�the�block.
7.��Sew�along�the�edge�of�the�turned�circle�edge.
8.��Sew�along�the�outside�edge�of�the�crescent.
9.��Repeat�until�all�crescents�are�
Quilt Top
Quilt Back
Crescent
NOTE: The diagrams of thequilts shown here were takenfrom the Beyond Circle Magicpattern #683.
The Finished baby quilt
Attaching the outside crescents (continued)
Side view of crescent attached to circle
Quilt Top
Edge of circle folded over
Quilt Back
Folded crescent
Stitching Stitching Stitching
Related Documents
